Search Results

Search found 7024 results on 281 pages for 'usb modem'.

Page 54/281 | < Previous Page | 50 51 52 53 54 55 56 57 58 59 60 61  | Next Page >

  • How do I usb tether my Cyanogen modded G1's internet connection to my Toshiba Tecra 8000 running Xub

    - by atticus
    I have usb-tethering enabled in my phone. It works fine with Vista. When I plug my phone into my Tecra 8000 laptop running Xubuntu, dmesg shows: "usb 1-1: new full speed USB device using uhci_hcd and address 8". I see that the OS has detected it as a storage device, but I can't get it to function correctly as a network device. /dev/us* shows no usb0, but it does show /dev/usbdev1.1_ep00 /dev/usbdev1.1_ep81 /dev/usbdev1.8_ep00 ... usbdev1.8_ep83. I could just use the wireless tether app for android, but I can't get my Netgear wg511 v2 (made in China) wireless card to work in this laptop either. But that's another post for later.

    Read the article

  • Can you use a USB dongle inside a VMWare ESX Virual Machine?

    - by Keith Sirmons
    Howdy, I need to know if a USB dongle that is required as a license key for a piece of software will accessible from the physical host machine. This will be a small vSphere 4 installation targeting the quick backup and system restore capabilities of VMWare, not specifically HA, so I am not to worried about the virtual machine automatically failing over to another physical machine and the dongle not being accessible. Does ESX have the capability to map a physical USB port or device to a specific Virtual Machine? I believe this is the dongle: Sentinal Superpro USB Dongle by Rainbow Technologies Thank you, Keith

    Read the article

  • Bizarre and very specific Internet connection loss

    - by Synetech
    Yesterday (Friday, September 21, 2012), my Internet connection started acting up. After some testing, I confirmed a very specific and baffling set of symptoms: Internet connection goes away every 25-35 minutes (I did not confirm the exact interval, but it seems to be about 30 mins.) Only some protocols are affected; HTTP*, P2P, etc. stop working; FTP, etc. continue to work When it’s stopped, cannot even ping router or cable-modem IPs or view their firmware pages Domain-names and IPs are irrelevant (for protocols that stop working, neither work, for those that still work, both work) Resetting router fixes it for another 30 minutes Keeping the connection idle or active doesn’t seem to make a difference (nor the bandwidth usage in that period) Connecting directly to cable-modem allows it to work indefinitely Disconnecting the router from the cable-modem works indefinitely (no Internet connection obviously, but can still access router IP and firmware page) Connecting the router to the cable-modem, but putting the modem on standby also works indefinitely Same problem with both a wireless laptop and wired (on any port) desktop (both Windows 7; will try to test Windows XP when possible) Nothing had changed in the days leading up to the issue. No modifications to the networking configuration or the router; there were not even any Windows updates except for an MSSE definition update. Waiting does not fix it, nor does any amount of fiddling with anything; only resetting the router fixes it for 30 minutes (resetting the cable-modem doesn't work either) I tried cleaning the pins in the router’s plugs, but that didn’t help, which was not really a surprise since I was not getting a lost connection error. Obviously my first thought was that the router was having a problem, and this is borne out by some tests. The problem is that when it drops, it is not a full drop since I can still do things like ftp ftp.mcafee.com and such which means that the connection and DNS are still working. Moreover, if it were the router, then why does it stay alive indefinitely when not connected to the cable-modem (i.e., no outside influence)? The problem doesn't seem to be either the cable-modem nor the router, but rather an interaction between the two, like something from the outside (port scan? hacker? ISP?) that is triggering a problem in the router. I see that there have been a couple of vulnerabilities for the DI-524, but those were a while back and should be fixed since I have the last firmware for it. I don’t think it’s my ISP (Rogers) since I have been using the router for several years without problem and can connect indefinitely when bypassing it. But I can’t rule them out since that is one of the only possible things that could have suddenly changed. Does anybody have any ideas of explanations, fixed, or tests? (I note that when I opened the router, I heard a very high-pitched noise from somewhere near the capacitors/ferrite ring which I don’t think I heard the last time I opened it a few years ago, but then if it were that, then why would it affect only a very small, specific set of functions?)

    Read the article

  • How do I recover missing partition. Windows 8 with recovery USB?

    - by Akbar Ali
    i bought a Samsung laptop with Windows 8 preinstalled. After a year I removed Windows 8 and installed Windows 7. Before removing Windows 8, I made a Windows 8 recovery USB. Now I want to get back my original Windows 8. When I used the USB, it said missing recovery partition or partition has been deleted. Can I install Windows 8 from the internet, and if I use my recovery USB will it activate Windows or not? Or is there any other way to do this task?

    Read the article

  • How can I login to Ubuntu using a USB serial port?

    - by marc
    How can enable remote terminal login into Ubuntu 9.10 using a USB serial port? I created device /dev/ttyUSB0 and i want to allow logins using Hyper-Terminal. I found some resources but they are related to real hardware rs232 ports. I can't find any information about USB converter. So far I have established connection between that USB-serial port and my laptop. I can send text to the port (cp sometext.txt /dev/ttyUSB0) and read it using hyperterminal. What do I need to do to enable logins on this port?

    Read the article

  • How do I usb tether my Cyanogen modded G1's internet connection to my Toshiba Tecra 8000 running Xub

    - by atticus
    I have usb-tethering enabled in my phone. It works fine with Vista. When I plug my phone into my Tecra 8000 laptop running Xubuntu, dmesg shows: "usb 1-1: new full speed USB device using uhci_hcd and address 8". I see that the OS has detected it as a storage device, but I can't get it to function correctly as a network device. /dev/us* shows no usb0, but it does show /dev/usbdev1.1_ep00 /dev/usbdev1.1_ep81 /dev/usbdev1.8_ep00 ... usbdev1.8_ep83.

    Read the article

  • What is the best file system and allocation size for a USB flash drive?

    - by e-t172
    I'm considering using my 4 GB Kingston DataTraveler USB stick to store my Firefox and Thunderbird profiles for my laptop and desktop PCs. I want to maximize performance when using Firefox. The question is: what is the best file system and allocation size for the fastest Firefox profile operation on a USB flash drive? I'm using Windows 7 on both machines and I don't care about compatibility or the drive's lifetime. I just want to maximize performance. I could even use ext2 with the Ext2 IFS driver if that means it'll be faster. I'm assuming (perhaps I'm wrong) that putting a Firefox profile on a USB stick would be a "lots of small files" usage. In that case, it seems that NTFS would perform best, but I'm not sure. Besides I found nothing regarding the best allocation size to use. Considering that the default allocation size is designed for hard drives (which have different characteristics), I'm assuming that the default allocation size is not the best.

    Read the article

  • Fedora12 Slow USB 2.0 Write Speed, ehci_hcd module is missing.

    - by MA1
    I am using Fedora 12, the problem i am facing is USB 2.0 write speed. I have a dual boot system with Window XP and Fedora 12. USB 2.0 write speed in Windows XP is much faster then what i am getting in Fedora 12. After some googling i came to know that ehci_hcd module is missing/not present in my system. ehci_hcd module is neither loaded nor it is present in the available list of modules. Can someone guide me how to fix this issue? Is ehci_hcd have something to do with USB 2.0 write speed or? Should i have to recompile the kernel and add/enable he ehci_hcd module?

    Read the article

  • How can I guess if a USB cable will power my devices?

    - by rsanchez
    I've had problems with one long (4 meter) USB Mini-B to USB Type-A cable not being able to boot a 2.5'' external hard disc due to not supplying enough current. On top of that, the cable used a Type-A to Mini-B adapter for the Mini-B part, which probably made things worse. Three different shorter cables I got around made the hard disk work without extra current, so it was definitively the cable's fault. However, if I plugged the hard disk to the power, and used the long cable just for data it worked. Here is some related information on powering through USB cables: http://www.girr.org/mac_stuff/usb_stuff.html I have not any long cables that don't have an intermediary Type-A to Mini-B adapter to try them out. My question is: is there a way to guess if a cable will provide enough power for charge/disk drive power? Is it related to the length of the cable, to the build quality of the cable, or the fact that uses intermediary adapters?

    Read the article

  • Can I install Windows OS (Windows 7) on a removable USB hard drive?

    - by Hemant
    I wanted to take a sneak peak at Windows 7 so I thought of installing it. I have Windows Vista on my laptop which came pre-installed with it. I didnt want to mess with it. So I created a partition (20 GB) in my USB external hard disk and tried to install Windows 7 on that partition. But when I booted from Windows 7 DVD and selected the target partition on USB hard disk, it said it cannot be installed. Is there any way to install windows on external USB hard disk?

    Read the article

  • Is there a USB ethernet (wired) adapter that is really compatible with Windows 7 64-bit?

    - by nbolton
    I've checked the Windows 7 compatibility site, and it lists a fair few USB ethernet (wired, not wireless) adapters that should work with Windows 7 64-bit. However, whenever I Google for the model number and Windows 7 64-bit, there's many forum posts claiming that the devices actually don't work with 64-bit (but do work with 32-bit). I've actually also found this with the LUPO USB ethernet adapter; works with 32-bit win7, but not 64-bit (no drivers available). So is there anyone out there who is 100% certain, and have actually used successfully, a 64-bit win7 capable USB ethernet adapter?

    Read the article

  • Does mdadm allow to mix sata drives and USB -> sata drives ?

    - by marc
    Welcome, I have question, i have working array md5 of 5 drives. We are running out of space. Server don't have big usage but it have to be online. We can't add another controller. I got idea to buy a USB drive case ? Does mdadm allow to mix array created on sata drives by controller and virtual usb ? (we don't boot from mdadm) But im not sure is this will work ? Is usb drives are configurated before mdadm demon start ? Regards

    Read the article

  • How do I get the Windows 7 installer onto a USB drive?

    - by Rod
    I'm having trouble installing Windows 7 onto my old laptop. The problem appears to be the laptop's DVD-ROM no longer seems to work. Sucks. So, I'm trying to figure out how to get a bootable USB with my Windows 7 DVD info onto it. I found this link here on superuser.com: http://superuser.com/questions/66948/place-a-bootable-iso-on-a-usb-drive That looks good, except for the detail about making the USB bootable. It said that the OS you're making it bootable on must be the same as the machine you're going to be installing it on. I can't do that. The machine I would make it bootable from is a 64-bit version of Windows 7. The target machine is 32-bit. So, how's this going to work?

    Read the article

  • Can I format a USB key in GUID mode in windows 7 to make it Mac OSX boot friendly?

    - by digiguru
    I have a macbookpro that wont boot properly. I've tried resetting the PRAM (holding down option - alt - P - R), but it doesn't work, it gets halfway through the boot process and says "You need to restart your computer" in several languages. Recently I downloaded a USB Key compatible Linux OS. This USB Key works as a boot loader on Windows machines, but on OSX it can only find the Harddrive partitions when I go into the boot loader menu (holding down Option on startup). I am assuming it is because it is formatted as FAT32, and not GUID Table. I believe my CD drive is also bust, it hasn't worked in a long time. I don't have another Mac computer, so is there a way I can format the USB key as GUID Partition from a windows 7 machine?

    Read the article

  • Is it possible to use two separate USB tuners with Windows Media Center?

    - by Lunatik
    I'm planning to replace my traditional PC-style media center (with twin tuners) with an Asrock Ion 3D (or similar) but this means forgoing my existing PCI-E dual tuner card for a USB solution. Since Freeview HD (using DVB-T2) is now available I'd like to equip my media center to take advantage. The trouble is there are currently no dual DVB-T2 USB tuners on the market (that I can find anyway). Would I be able to plug two separate USB tuners and have them correctly picked up and working within all apps, including Windows Media Center? Are there any caveats I might need to bear in mind when using two tuners in this way?

    Read the article

  • Why does my USB stick not show up in Windows Vista?

    - by Kjensen
    Just reinstalled a Lenovo laptop with Vista. Two separate USB sticks, that work fine on another computer, will not show up on this Vista computer. USB ports work fine for other stuff. USB sticks worked before I reinstalled the computer. After looking around, I tried going into Disk management, to see if they appear there - they don't. Is there some sort of service, that might be disabled, not allowing removable drives to mount? Or what else can be wrong?

    Read the article

  • How do I usb tether my Cyanogen modded G1's internet connection to my Toshiba Tecra 8000 running Xubuntu?

    - by atticus
    I have usb-tethering enabled in my phone. It works fine with Vista. When I plug my phone into my Tecra 8000 laptop running Xubuntu, dmesg shows: "usb 1-1: new full speed USB device using uhci_hcd and address 8". I see that the OS has detected it as a storage device, but I can't get it to function correctly as a network device. /dev/us* shows no usb0, but it does show /dev/usbdev1.1_ep00 /dev/usbdev1.1_ep81 /dev/usbdev1.8_ep00 ... usbdev1.8_ep83 I could just use the wireless tether app for android, but I can't get my Netgear wg511 v2 (made in China) wireless card to work in this laptop either. But that's another post for later.

    Read the article

  • Should I format USB sticks and SD cards to FAT, FAT32, exFAT or NTFS? (Windows files, live Linux distors)

    - by superuser
    Does it depend on the media size which one to chose or on some other parameters? In Windows 7 FAT16 is the default. In pendrivelinux.com's Universal USB Installer FAT32. Which one to chose? How about NTFS for Windows use? How about exFAT? It is tne Microsoft designed filesystem for removable media. Is there a difference in USB sticks and SD cards in this regard? Edit: seeing developments in the other thread, should I still use something like exFAT if I don't want Recycle bins created on every single machine I plug my USB thumb drive in?

    Read the article

  • It's the ethernet 10/100 in LAN transfer faster than USB 1.0?

    - by dag729
    I have an old laptop (PIII 800MHz, with 256 RAM) that I wish to use as my home server: it'll have to serve just two people, so I think that I'll be more than ok as for the RAM and the CPU. The issue is about data, because the internal hard disk is a 12GB, that is...ridicolous! I have more than 60GB of mixed storage and counting (images, videos and music) in an external usb hd. I could put the hd in my desktop pc just to serve the big files through ethernet or let it inside its usb box attached to the laptop. The question is: which of these solutions will be the fastest? USB 1.0 attached to the server (laptop) or internal hard disk serving files via 10/100 ethernet to the laptop on demand?

    Read the article

  • How can I get the mount path of a USB device on OSX?

    - by xastor
    I have a backup script that backs up some data to a USB device. The problem I have is that OSX sometimes changes the expected mount path. For example if some file is locked under the expected mount path, OSX mounts it on another path. A USB device named 'BACKUP' can be mounted at /Volumes/BACKUP-1 instead of /Volumes/BACKUP. Is there a way to finding out the current mount path of a USB device in the OSX Terminal? Something like 'mount_path BACKUP' (command is fake) which would then return '/Volumes/BACKUP-1' or nothing if the device was not mounted?

    Read the article

  • VM VirtualBox, Ubuntu 9.10: USB memory stick and SD card not detected...

    - by vikramtheone
    Hello Guys, I have installed Ubuntu9.10 on VM VirtualBox, on my HP laptop. My laptop has several USB ports and also a SD card port. Unfortunately, I'm unable to access both, my pen-drive on the USB port and my 8GB SD card inserted in the SD Card port. Can anyone suggest me what I should do for my Ubuntu to detect both of them? I have installed all latest updates on Ubuntu. I'm able to use my USB mouse. Thank you Vikram

    Read the article

  • Why my USB mouse get suspended after 3 seconds of inactivity?

    - by Vi.
    Mouse's bottom LED goes off after 3 seconds after connection and cursor movements and wheel stops. Pressing any button, reconnecting or resetting USB device resumes it for another 3 seconds (when resumed by pressing button, this event does no go to X). This happens when using any of USB ports. This mouse works well with other computer with Linux. It was working well before. Why can it happen? How to fix it? Update: It happens only if laptop is on battery. Answer: this is caused by powersaving done by laptop-mode-tools. To temporary turn off powersaving one can use for i in /sys/bus/usb/devices/*/power/control; do echo on > $i; done

    Read the article

  • How can I disable write protection in my USB flash drive?

    - by 97847658
    My USB flash drive is currently unusable because it somehow (quite suddenly!) became write protected. I have googled around and tried many solutions to this problem, but none of them have worked so far. Here are some of the solutions I've tried: The drive has no tangible switch or button. Formatting the drive won't work, even in command line, even "low level formatting", because the drive is (after all) write protected. Changing certain registry keys to 0 doesn't seem to work. Repair_Neo2.9.exe says "USB Flash Disk not found!" One factor that may make it more difficult to find a solution: I have no idea what the make or model is, because I received the USB flash drive from my university as a gift. So if anyone knows how to find the make and model, that alone might be helpful. Any ideas? Thanks.

    Read the article

  • How do I restore a Windows 8 iso image to a USB disk in OS X?

    - by duci9y
    I am on OS X and have a Windows 8 Consumer Preview x64 image. My computer doesn’t have a CD drive (MacBook Air). I have a 4 GB USB drive. I want to restore that image to the USB drive. There are many tools to do that on Windows, but I can’t finger out how to do it in OS X. Please note that I can’t run a VM, as my Air is a limited use machine. What I’ve tried: Simply restore to USB. Convert the image to img and use dd. These don’t work. How do I go about doing this?

    Read the article

  • Turn 2 USB type A ports (receptacles) into an extension cable with 2 type A receptacles using Linux?

    - by Tianyang Li
    I'm currently trying to connect 2 USB devices together, but both ends are type A plugs. Before I buy a physical extension cords with 2 type A receptacles, I'd like to know if I can connect these 2 devices together at all by passing data "transparently" through a Linux box with = 2 USB ports. I'm actually trying to connect a keyboard to an Android phone, and I want to first try if it can work by using a Linux box as a "virtual" USB extension cord. Has anybody done something like this before? Thanks!

    Read the article

< Previous Page | 50 51 52 53 54 55 56 57 58 59 60 61  | Next Page >