Search Results

Search found 1810 results on 73 pages for 'ux matters'.

Page 57/73 | < Previous Page | 53 54 55 56 57 58 59 60 61 62 63 64  | Next Page >

  • Come up with a real-world problem in which only the best solution will do (a problem from Introduction to algorithms) [closed]

    - by Mike
    EDITED (I realized that the question certainly needs a context) The problem 1.1-5 in the book of Thomas Cormen et al Introduction to algorithms is: "Come up with a real-world problem in which only the best solution will do. Then come up with one in which a solution that is “approximately” the best is good enough." I'm interested in its first statement. And (from my understanding) it is asked to name a real-world problem where only the exact solution will work as opposed to a real-world problem where good-enough solution will be ok. So what is the difference between the exact and good enough solution. Consider some physics problem for example the simulation of the fulid flow in the permeable medium. To make this simulation happen some simplyfing assumptions have to be made when deriving a mathematical model. Otherwise the model becomes at least complex and unsolvable. Virtually any particle in the universe has its influence on the fluid flow. But not all particles are equal. Those that form the permeable medium are much more influental than the ones located light years away. Then when the mathematical model needs to be solved an exact solution can rarely be found unless the mathematical model is simple enough (wich probably means the model isn't close to reality). We take an approximate numerical method and after hours of coding and days of verification come up with the program or algorithm which is a solution. And if the model and an algorithm give results close to a real problem by some degree that is good enough soultion. Its worth noting the difference between exact solution algorithm and exact computation result. When considering real-world problems and real-world computation machines I believe all physical problems solutions where any calculations are taken can not be exact because universal physical constants are represented approximately in the computer. Any numbers are represented with the limited precision, at least limited by amount of memory available to computing machine. I can imagine plenty of problems where good-enough, good to some degree solution will work, like train scheduling, automated trading, satellite orbit calculation, health care expert systems. In that cases exact solutions can't be derived due to constraints on computation time, limitations in computer memory or due to the nature of problems. I googled this question and like what this guy suggests: there're kinds of mathematical problems that need exact solutions (little note here: because the question is taken from the book "Introduction to algorithms" the term "solution" means an algorithm or a program, which in this case gives exact answer on each input). But that's probably more of theoretical interest. So I would like to narrow down the question to: What are the real-world practical problems where only the best (exact) solution algorithm or program will do (but not the good-enough solution)? There are problems like breaking of cryptographic ciphers where only exact solution matters in practice and again in practice the process of deciphering without knowing a secret should take reasonable amount of time. Returning to the original question this is the problem where good-enough (fast-enough) solution will do there's no practical need in instant crack though it's desired. So the quality of "best" can be understood in any sense: exact, fastest, requiring least memory, having minimal possible network traffic etc. And still I want this question to be theoretical if possible. In a sense that there may be example of computer X that has limited resource R of amount Y where the best solution to problem P is the one that takes not more than available Y for inputs of size N*Y. But that's the problem of finding solution for P on computer X which is... well, good enough. My final thought that we live in a world where it is required from programming solutions to practical purposes to be good enough. In rare cases really very very good but still not the best ones. Isn't it? :) If it's not can you provide an example? Or can you name any such unsolved problem of practical interest?

    Read the article

  • Best way to process a queue in C# (PDF treatment)

    - by Bartdude
    First of all let me expose what I would like to do : I already dispose of a long-time running webapp developed in ASP.NET (C#) 2.0. In this app, users can upload standard PDF files (text+pics). The app is running in production on a Windows Server 2003 and has a dedicated database server (SQL server 2008) also running Windows Server 2003. I myself am a quite experienced web developer, but never actually programmed anything non-web (or at least nothing serious). I plan on adding a functionality to the webapp for which I would need a jpg snapshot of each page of the PDF. Creating these "thumbnails" isn't the big deal as such, I already do it inside my webapp using ghostscript. I've only done it on 1 page documents for now though, and the new functionality will need to process bigger documents. In order for this process to be transparent aswell for the admins as the final users, I would like to implement some kind of queue to delay the processing of the thumbnails. There again, no problem to create the queue, it will consist of records in a table, with enough info to find the pdf document back. Then I will need to process this queue, and that's were my interrogations start. Obviously the best solution to process it isn't an ASP script or so, so I will have to get out of my known environment. No problem, but I have no idea which direction to go. Therefore, a few questions : What should I develop ? I presumably need something that is "standby" on the server, runs when needed, then returns to idle state until further notice.Should I be looking into Windows service ? Is there another more appropriate type of project ? Depending on the first answer, what will be the approach ? Should I have somehow SQL server "tell" the program/service/... to process the queue, or should I have that program/service/... periodically check the state of the queue and treat new items. In both case, which functionality can I use ? we're not talking about hundreds of PDF a day (max 50 maybe), I can totally afford to treat the queue 1 item at a time. Can you confirm I don't have to look much further on threads and so ? (I found a lot of answers talking about threads in queue treatment, but it looks quite overkill for my needs) Maybe linked to the previous question : what about concurrent call to the program, whatever it is ? Let's suppose it is currently running, and a new record comes in the queue, what should be the behaviour ? I don't need much detailed answers and would already be happy with answers like "You can do the processing with a service, and yes it's possible to have sqlserver on machine A trigger a service start on machine B" or "You have to develop xxx and then use the scheduler to run it every xxx minutes". I don't mind reading articles and so, but I can hardly afford to spend too much time learning stuff to finally realize I went the wrong way for this project, so basically I'm trying to narrow down the scope of matters I need to investigate. Thanks for reading me, I hope I'll find some helping hands on here :-)

    Read the article

  • What good technology podcasts are out there?

    - by Michael Stum
    Yes, Podcasts, those nice little Audiobooks I can listen to on the way to work. With the current amount of Podcasts, it's like searching a needle in a haystack, except that the haystack happens to be the Internet and is filled with too many of these "Hot new Gadgets" stuff :( Now, even though I am mainly a .NET developer nowadays, maybe anyone knows some good Podcasts from people regarding the whole software lifecycle? Unit Testing, Continous Integration, Documentation, Deployment... So - what are you guys and gals listening to? Please note that the categorizations are somewhat subjective and may not be 100% accurate as many podcasts cover several areas. Categorization is made against what is considered the "main" area. General Software Engineering / Productivity Stack Overflow TekPub (Requires Paid Subscription) SE Radio 43 Folders Perspectives Dr. Dobb's (now a video feed) The Pragmatic Podcast (Inactive) IT Matters Agile Toolkit Podcast The Stack Trace (Inactive) Parleys Techzing The Startup Success Podcast Berkeley CS class lectures FOSS Weekly .NET / Visual Studio / Microsoft Herding Code Hanselminutes .NET Rocks! Deep Fried Bytes Alt.Net Podcast Polymorphic Podcast Sparkling Client (The Silverlight Podcast) dnrTV! Spaghetti Code ASP.NET Podcast Channel 9 Radio TFS PowerScripting Podcast The Thirsty Developer Elegant Code ConnectedShow Crafty Coders Coding QA jQuery yayQuery The official jQuery podcast Java / Groovy The Java Posse Grails Podcast Java Technology Insider Ruby / Rails Railscasts Rails Envy The Ruby on Rails Podcast Rubiverse Web Design / JavaScript / Ajax WebDevRadio Boagworld The Rissington podcast Ajaxian YUI Theater Unix / Linux / Mac / iPhone Mac Developer Network Hacker Public Radio Linux Outlaws Mac OS Ken LugRadio Linux radio show (Inactive) The Linux Action Show! Linux Kernel Mailing List (LKML) Summary Podcast Stanford's iPhone programming class SysAdmin, Security or Infrastructure RunAs Radio Security Now! Crypto-Gram Security Podcast Hak5 VMWare VMTN Windows Weekly PaulDotCom Security The Register - Semi-Coherent Computing FeatherCast General Tech / Business Tekzilla This Week in Tech The Guardian Tech Weekly PCMag Radio Podcast Entrepreneurship Corner Manager Tools Other / Misc. / Podcast Networks IT Conversations Retrobits Podcast No Agenda Netcast Cranky Geeks The Command Line Freelance Radio IBM developerWorks The Register - Open Season Drunk and Retired Technometria Sod This Radio4Nerds Hacker Medley

    Read the article

  • Using Visual Studio 2008 to Assemble, Link, Debug, and Execute MASM 6.11 Assembly Code

    - by Kreychek
    I would like to use Visual Studio 2008 to the greatest extent possible while effectively compiling/linking/building/etc code as if all these build processes were being done by the tools provided with MASM 6.11. The exact version of MASM does not matter, so long as it's within the 6.x range, as that is what my college is using to teach 16-bit assembly. I have done some research on the subject and have come to the conclusion that there are several options: Reconfigure VS to call the MASM 6.11 executables with the same flags, etc as MASM 6.11 would natively do. Create intermediary batch file(s) to be called by VS to then invoke the proper commands for MASM's linker, etc. Reconfigure VS's built-in build tools/rules (assembler, linker, etc) to provide an environment identical to the one used by MASM 6.11. Option (2) was brought up when I realized that the options available in VS's "External Tools" interface may be insufficient to correctly invoke MASM's build tools, thus a batch file to interpret VS's strict method of passing arguments might be helpful, as a lot of my learning about how to get this working involved my manually calling ML.exe, LINK.exe, etc from the command prompt. Below are several links that may prove useful in answering my question. Please keep in mind that I have read them all and none are the actual solution. I can only hope my specifying MASM 6.11 doesn't prevent anyone from contributing a perhaps more generalized answer. Similar method used to Option (2), but users on the thread are not contactable: http://www.codeguru.com/forum/archive/index.php/t-284051.html (also, I have my doubts about the necessity of an intermediary batch file) Out of date explanation to my question: http://www.cs.fiu.edu/~downeyt/cop3402/masmaul.html Probably the closest thing I've come to a definitive solution, but refers to a suite of tools from something besides MASM, also uses a batch file: http://www.kipirvine.com/asm/gettingStarted/index.htm#16-bit I apologize if my terminology for the tools used in each step of the code - exe process is off, but since I'm trying to reproduce the entirety of steps in between completion of writing the code and generating an executable, I don't think it matters much.

    Read the article

  • WinForms ComboBox DropDown and Autocomplete window both appear

    - by Clyde
    I've got a combobox on a winforms app with this code: comboBox1.AutoCompleteMode = AutoCompleteMode.SuggestAppend; comboBox1.AutoCompleteSource = AutoCompleteSource.ListItems; DataTable t = new DataTable(); t.Columns.Add("ID", typeof(int)); t.Columns.Add("Display", typeof(string)); for (int i = 1; i < 2000; i++) { t.Rows.Add(i, i.ToString("N0")); } comboBox1.DataSource = t; comboBox1.ValueMember = "ID"; comboBox1.DisplayMember = "Display"; I then follow these steps when the window opens: Click the combobox drop down button -- this displays the list of items and selects the text in the combobox Type '5', '1' ... i.e. I'm looking to use autocomplete to search for 515, 516, etc. You'll see that the autocomplete window now appears ON TOP of the drop down list. However if I mouse over, it's the obscured drop down window behind the autocomplete window that's receiving the mouse events, including the click. So I think I'm clicking on an autocomplete item but actually clicking on something totally random that I can't see. Is this a bug in the ComboBox? I'm using Windows 7 if that matters. Am I configuring the ComboBox wrong somehow? Note also that using the KEYBOARD uses the autocomplete drop down. So up/down arrow keys are using the front window, but the mouse is using the back window.

    Read the article

  • SignalR - No connection could be made because the target machine actively refused it?

    - by user2151460
    Trying to create a Console application that is going to send data to a website. The website is built with Codeiginter framework, if that matters. When i'm running my Console application, i get the error that a connection could not be made, and that the machine refused it. Been watching some tutorials, but most of them are using Hubs etc, which imo i do not need for this simple task?. All i want to do is to send data to the website, one way. Here is my Console application using System; using System.Collections.Generic; using System.Linq; using System.Text; using System.Threading.Tasks; using Microsoft.AspNet.SignalR; using Microsoft.AspNet.SignalR.Client; namespace signalrDemo { class Program { static void Main(string[] args) { var connection = new Connection("http://localhost:3000/servers/2"); connection.Received += data => Console.WriteLine(data); connection.Start().ContinueWith(task => { if (task.IsFaulted) { Console.WriteLine("Failed to start: {0}", task.Exception.GetBaseException()); } else { Console.WriteLine("Success! Connected with client connection id {0}", connection.ConnectionId); } }); Console.ReadLine(); } } } And at my website, i have this code $(function () { var connection = $.connection('http://localhost/servers/2'); connection.received(function (data) { $("message").append(data + '<br />'); }); connection.start().done(); }); Thank you.

    Read the article

  • VS 2010 debugger not loading symbols when attaching to NUnit

    - by Dave Hanna
    (I just posted this in the NUnit discussion group on groups.google.com) Under VS 2008, I would run my tests under NUnit, and, if I needed to debug, I would attach the VS2008 debugger to the running Nunit process (Debug - Attach to Process), and set any breakpoints on code I wanted to examine. When I hit the Run buttion in NUnit, it would hit the breakpoint. (BTW, if it matters, this was running NUnit 2.5.2). I just upgraded to NUnit 2.5.4 and VS 2010. When I set a breakpoint, then attach to NUnit, I get a little warning symbol on the breakpoint dot, and hovering over it gives the tooltip "Breakpoint will not be hit. No symbols are currently loaded". Going to the Debug - Windows - Modules window shows a whole bunch of Windows and NUnit modules loaded, with the Symbol Status of "Skipped loading symbols", and then 1 module with a funny name that changes each time (r1euhmh5 right now), and Symbol Status of "No symbols loaded". (There is no trace of a module with a name remotely like my DLL under test). Right clicking the funny filename (assuming that to be some mapping from my DLL under test), and clicking Load Symbols From - Symbol Path, and navigating to the bin\debug folder, then clicking the pdb file of my DLL under test, I get the message "A matching symbol was not found in this folder". (The top of the Open dialog box has a line that says "Original location: r1euhmh5.pdb") So what's changed? And how do I go about debugging/breakpointing under VS 2010/NUnit 2.5.4 (Or is it possible I screwed something up when I decided to go through my VS2010 options and set some of them to more advanced levels than I knew what I was doing?) I appreciate any help.

    Read the article

  • C# Can I return HttpWebResponse result to iframe - Uses Digest authentication

    - by chadsxe
    I am trying to figure out a way to display a cross-domain web page that uses Digest Authentication. My initial thought was to make a web request and return the entire page source. I currently have no issues with authenticating and getting a response but I am not sure how to properly return the needed data. // Create a request for the URL. WebRequest request = WebRequest.Create("http://some-url/cgi/image.php?type=live"); // Set the credentials. request.Credentials = new NetworkCredential(username, password); // Get the response. HttpWebResponse response = (HttpWebResponse)request.GetResponse(); // Get the stream containing content returned by the server. Stream dataStream = response.GetResponseStream(); // Open the stream using a StreamReader for easy access. StreamReader reader = new StreamReader(dataStream); // Read the content. string responseFromServer = reader.ReadToEnd(); // Clean up the streams and the response. reader.Close(); dataStream.Close(); response.Close(); return responseFromServer; My problems are currently... responseFromServer is not returning the entire source of the page. I.E. missing body and head tags The data is encoded improperly in responseFromServer. I believe this has something to do with the transfer encoding being of the type chunked. Further more... I am not entirely sure if this is even possible. If it matters, this is being done in ASP.NET MVC 4 C#. Thanks, Chad

    Read the article

  • How to exclude jars generated by maven war plugin ?

    - by Jacques René Mesrine
    Because of transitive dependencies, my wars are getting populated by xml-apis, xerces jars. I tried following the instructions on the reference page for maven-war-plugin but it is not working. <plugin> <groupId>org.apache.maven.plugins</groupId> <artifactId>maven-war-plugin</artifactId> <configuration> <packagingExcludes>WEB-INF/lib/xalan-2.6.0.jar,WEB-INF/lib/xercesImpl-2.6.2.jar,WEB-INF/lib/xml-apis-1.0.b2.jar,WEB-INF/lib/xmlParserAPIs-2.6.2.jar</packagingExcludes> <webXml>${basedir}/src/main/webapp/WEB-INF/web.xml</webXml> <warName>project1</warName> <warSourceDirectory>src/main/webapp</warSourceDirectory> </configuration> </plugin> What am I doing wrong ? If it matters, I discovered that the maven-war-plugin I'm using is at version 2.1-alpha-1

    Read the article

  • Alternatives to WPD/WIA on Windows XP?

    - by Marek
    WPD does not work correctly on Windows XP (SP1 if that matters), even if Microsoft states it does. Problem with WPD: IPortableDeviceManager.GetDevices call does not find any devices on Win XP while it finds all connected cameras on Windows 7. A few other people had this same problem with WPD not working on XP, no solution: 1 2 I have decided to reimplement the functionality using WIA. Problem with WIA automation/WIA interfaces: WIA automation offers only silly dialogs when interacting with the camera - I need to rather do this from code Programming against WIA interfaces is recommended to achieve lower level tasks with WIA. I have not found any samples how to use WIA interfaces from C# (also found some indication that this is not possible at all or at least very hard to do) Thus I have looked at WIA 2.0 (wrapper around wiaaut.dll): I am getting HRESULT 0x80210006 (WIA_ERROR_BUSY) for the first time and then HRESULT E_FAIL all the time on Win XP while on Windows 7 the same code works without a problem. I am getting out of options here... Can you recommend an alternative to provide the following features for cameras connected to the computer that works on Windows XP? sends a notification that a picture was taken allows to download the recently taken picture from the camera

    Read the article

  • Context migration in CUDA.NET

    - by Vyacheslav
    I'm currently using CUDA.NET library by GASS. I need to initialize cuda arrays (actually cublas vectors, but it doesn't matters) in one CPU thread and use them in other CPU thread. But CUDA context which holding all initialized arrays and loaded functions, can be attached to only one CPU thread. There is mechanism called context migration API to detach context from one thread and attach it to another. But i don't how to properly use it in CUDA.NET. I tried something like this: class Program { private static float[] vector1, vector2; private static CUDA cuda; private static CUBLAS cublas; private static CUdeviceptr ptr; static void Main(string[] args) { cuda = new CUDA(false); cublas = new CUBLAS(cuda); cuda.Init(); cuda.CreateContext(0); AllocateVectors(); cuda.DetachContext(); CUcontext context = cuda.PopCurrentContext(); GetVectorFromDeviceAsync(context); } private static void AllocateVectors() { vector1 = new float[]{1f, 2f, 3f, 4f, 5f}; ptr = cublas.Allocate(vector1.Length, sizeof (float)); cublas.SetVector(vector1, ptr); vector2 = new float[5]; } private static void GetVectorFromDevice(object objContext) { CUcontext localContext = (CUcontext) objContext; cuda.PushCurrentContext(localContext); cuda.AttachContext(localContext); //change vector somehow vector1[0] = -1; //copy changed vector to device cublas.SetVector(vector1, ptr); cublas.GetVector(ptr, vector2); CUDADriver.cuCtxPopCurrent(ref localContext); } private static void GetVectorFromDeviceAsync(CUcontext cUcontext) { Thread thread = new Thread(GetVectorFromDevice); thread.IsBackground = false; thread.Start(cUcontext); } } But execution fails on attempt to copy changed vector to device because context is not attached? Any ideas how i can get it work?

    Read the article

  • Implementing Autocompletion in iPhone UITextField for contacts in address book

    - by nacho4d
    Hi, I would like to have a UITextField or UITextView in where as I do some input, alternatives will appear something similar to when you type an address in Mail Application, alternatives appear down and is possible tap them so get a better input user interface.(since there is no need to type the complete word or address or phone number) I do know how to fetch data from Address Book framework, also how to input text in UITextField/UITextView and its delegates but I don't know what kind of structure to use for fetching and showing data as the user do his/her input. I know basic CoreData if this matters, I hope I can get some help. UPDATE (2010/3/10): I don't have problem make a native-like GUI but I am asking about the algorithm, does any body knows what kind algorithm is best for this thing? maybe some binary tree? Or should I just fetch data from coredata everytime? Thanks Ignacio UPDATE (2010/03/28): I've been very busy these days, so I have not tried UISearchResults but it seems fine to me. BUT I wonder was there a necessity of deletion of the wining answer? I don't think is fair my reputation went down and couldn't see the winning answer. ;(

    Read the article

  • Google appengine authentication on iPhone web app on the home screen

    - by Rakesh Pai
    I'm using Google appengine for developing an web application that is meant to be used on both the browser and iphone. I have purchased a domain name for this application, so that I have a pretty URL. I've used the User API for authentication. This works just fine on desktop browsers and iPhone Safari. The user could add the application to the home screen (by tapping the "+" at the bottom toolbar). However when that's done, it seems like the cookies set by Google are not in affect within this "application", and the user is effectively logged out. To make matters worse, when the user clicks on the login link (as generated by GAE), the app closes and opens safari to complete the login. Since the session is apparently not shared between the two, the login process is futile, and the "home-screen" version of the app continues to be logged out. It seems that the cookies are not shared between a "home-screen" app and Safari. It also seems that the "home-screen" app will only work within it's own domain, and any redirect to any other domain will open Safari. Any idea how I can go about fixing this?

    Read the article

  • maven and lift using scala 2.8 : lift-mapper missing?

    - by Bjorn J
    Newbie question since I'm not up to speed using maven at all. I'm trying to use scala + lift using scala 2.8, environment is a win7 box if that matters. I create a basic project using: mvn archetype:generate -U -DarchetypeGroupId=net.liftweb -DarchetypeArtifactId=lift-archetype-basic -DarchetypeVersion=2.0-scala280-SNAPSHOT -DarchetypeRepository=http://scala-tools.org/repo-snapshots -DremoteRepositories=http://scala-tools.org/repo-snapshots -DgroupId=com.liftworkshop -DartifactId=todo -Dversion=1.0-SNAPSHOT So far so good, but then, I try to cd into my new project and do: mvn jetty:run I after quite a few downloads end up with a error like below: [ERROR] BUILD ERROR [INFO] ------------------------------------------------------------------------ [INFO] Failed to resolve artifact. Missing: ---------- 1) net.liftweb:lift-mapper:jar:2.0-scala280-SNAPSHOT Try downloading the file manually from the project website. Then, install it using the command: mvn install:install-file -DgroupId=net.liftweb -DartifactId=lift-mapper -D version=2.0-scala280-SNAPSHOT -Dpackaging=jar -Dfile=/path/to/file Alternatively, if you host your own repository you can deploy the file there: mvn deploy:deploy-file -DgroupId=net.liftweb -DartifactId=lift-mapper -Dve rsion=2.0-scala280-SNAPSHOT -Dpackaging=jar -Dfile=/path/to/file -Durl=[url] -Dr epositoryId=[id] Path to dependency: 1) com.liftworkshop:todo:war:1.0-SNAPSHOT 2) net.liftweb:lift-mapper:jar:2.0-scala280-SNAPSHOT ---------- 1 required artifact is missing. for artifact: com.liftworkshop:todo:war:1.0-SNAPSHOT from the specified remote repositories: scala-tools.snapshots (http://scala-tools.org/repo-snapshots), scala-tools.releases (http://scala-tools.org/repo-releases), central (http://repo1.maven.org/maven2) Any ideas?

    Read the article

  • C++ smart pointers: sharing pointers vs. sharing data

    - by Eli Bendersky
    In this insightful article, one of the Qt programmers tries to explain the different kinds of smart pointers Qt implements. In the beginning, he makes a distinction between sharing data and sharing the pointers themselves: First, let’s get one thing straight: there’s a difference between sharing pointers and sharing data. When you share pointers, the value of the pointer and its lifetime is protected by the smart pointer class. In other words, the pointer is the invariant. However, the object that the pointer is pointing to is completely outside its control. We don’t know if the object is copiable or not, if it’s assignable or not. Now, sharing of data involves the smart pointer class knowing something about the data being shared. In fact, the whole point is that the data is being shared and we don’t care how. The fact that pointers are being used to share the data is irrelevant at this point. For example, you don’t really care how Qt tool classes are implicitly shared, do you? What matters to you is that they are shared (thus reducing memory consumption) and that they work as if they weren’t. Frankly, I just don't undersand this explanation. There was a clarification plea in the article comments, but I didn't find the author's explanation sufficient. If you do understand this, please explain. What is this distinction, and how are other shared pointer classes (i.e. from boost or the new C++ standards) fit into this taxonomy? Thanks in advance

    Read the article

  • How do you prove your cleverness and programming skills?

    - by Sebi
    Lately, there were a lot of questions related to career planning and how to decide which languages to learn, how to learn new languages and so on. But I was thinking about a way, how do you will proof later that you're really learned something. Ok you can mentione it in your application for a job or in the interview, but by just stating that I was learning e.g. C++ at home, I don't think this will really be very sucessful. So some suggested to create something (homepage, application, whatsoever) to prove that you also can use these skills in practice. But still I'm not really sure if this will provide any benefit, because it would require a very special project to show all your skills and I don't think you can easily invent such a project (that sould also be useful). Others suggested to solve for example the Project Euler questions but still I'm not sure how this will be useful in career-planning. Are you going to mention at your job interview that you solved all this question in the company's favorite programming language?? :D I can't imagine. The reason why I'm asking is that I have some spare time and I would really like to learn some new programming languages (C++ and/or Python if this matters) and I'm looking for a smart way to do is while concurrently assure that it will be useful in my future career. (there are 3-4 companies id like to try to get a job andIi know all of them are using mainly C++/Pyhton...)

    Read the article

  • Pointing non-www to a spcific sub-directory

    - by Ben Sinclair
    I might be going about this all wrong so let me know if I am. I am creating software that allows people to sign up and have their own sub-domain on my website. So say my website is ben.com, they could have their own sub-domain called juice.ben.com. When they type their sub-domain juice.ben.com in their address bar, it will load the contents in a root directory. I have also set-up a .htaccess redirect to redirect www.ben.com to ben.com. Not sure if this matters with my question but I thought I'd mention it. Ok, so basically what I think I need to do is put the software they they've signed up to in the root directory. So when someone goes to juice.ben.com, they will be pointed to the root directory (I beleive I cans et-up wild card sub-domains with my host) and the software will then analyse their sub-domain and then display their account. Now, if someone just types in ben.com into their browser, I want it to show the contents of the ben.com/_website/ folder but still show in the address bar that they are still in the root directory. Hopefully I am making sense :) Is this possible with htaccess? If so, what do I need to do?

    Read the article

  • Writing an efficient cron job script utilizing Zend_Mail_Storage_Imap.

    - by fireeyedboy
    I'm new to the IMAP protocol and Zend_Mail_Storage and I'm writing a small php script for a cron job that should regularly poll an IMAP account and check for new messages, and send an e-mail if new messages have arrived. As you can imagine, I want to only poll the IMAP account for relevant messages, and I only want to send a new e-mail if new messages have arrived since the last polled new message. So I thought of keeping track of the last message I polled with some unique identifier for a message. But I'm a bit uncertain about whether the methods I want to utilize for this do what I expect them to do though. So my questions are: Does the iterator position of Zend_Mail_Storage_Imap actually resemble some IMAP unique identifier for messages, or is it simply only and internal position of Zend_Mail_Storage_Abstract? For instance, if I tell it to seek() to message 5 (which I stored from an earlier session) will it indeed seek to the appropriate message on the IMAP server, even if for instance messages have been deleted since last session? Would keeping track of this latest polled message id in a file suffice for a cron job that, say, polls the account every 5 or 10 minutes? Or is this too naive, and should I be using a database for instance. Or is there maybe a much easier way to keep track of such state with Zend_Mail_Storage_Abstract? Also, do I need to poll every IMAP folder? Or is everything accumulated when I poll INBOX? If you could shed some light on any of these matters, I'ld appreciate it. Thanks in advance.

    Read the article

  • jQuery scrollTop() doesn't seem to work in Safari or Chrome (Windows)

    - by Pointy
    I've got a simple setup to allow a "help"-style window to be loaded and scrolled to a particular point on the page. More or less the code looks like this: var target = /* code */; target.offsetParent().scrollTop(target.offset().top - fudgeValue); The target of the scroll and the fudge value are determined by a couple of hints dropped on the page, and I'm having no problems with that part of this mechanism anywhere. In Firefox and IE8, the above code works exactly like I want: the scrolled box (in this case, the page body) correctly scrolls the contained stuff to the right point in the window when it's told to do so. In Chrome and Safari, however, the call to scrollTop() apparently does nothing at all. All the numbers are OK, and the target refers to the right thing (and the offsetParent() is indeed the body element), but nothing at all happens. As far as I can tell from googling around, this is supposed to work. Is there something funny about the renderer under Safari and Chrome? This is jQuery 1.3.2 if that matters. Test page: http://gutfullofbeer.net/scrolltop.html

    Read the article

  • Sparse parameter selection using Genetic Algorithm

    - by bgbg
    Hello, I'm facing a parameter selection problem, which I would like to solve using Genetic Algorithm (GA). I'm supposed to select not more than 4 parameters out of 3000 possible ones. Using the binary chromosome representation seems like a natural choice. The evaluation function punishes too many "selected" attributes and if the number of attributes is acceptable, it then evaluates the selection. The problem is that in these sparse conditions the GA can hardly improve the population. Neither the average fitness cost, nor the fitness of the "worst" individual improves over the generations. All I see is slight (even tiny) improvement in the score of the best individual, which, I suppose, is a result of random sampling. Encoding the problem using indices of the parameters doesn't work either. This is most probably, due to the fact that the chromosomes are directional, while the selection problem isn't (i.e. chromosomes [1, 2, 3, 4]; [4, 3, 2, 1]; [3, 2, 4, 1] etc. are identical) What problem representation would you suggest? P.S If this matters, I use PyEvolve.

    Read the article

  • Selected Item in Dropdown Lists from Enum in ASP.net MVC

    - by AlexCuse
    Sorry if this is a dup, my searching turned up nothing. I am using the following method to generate drop down lists for enum types (lifted from here: http://addinit.com/?q=node/54): public static string DropDownList(this HtmlHelper helper, string name, Type type, object selected) { if (!type.IsEnum) throw new ArgumentException("Type is not an enum."); if(selected != null && selected.GetType() != type) throw new ArgumentException("Selected object is not " + type.ToString()); var enums = new List<SelectListItem>(); foreach (int value in Enum.GetValues(type)) { var item = new SelectListItem(); item.Value = value.ToString(); item.Text = Enum.GetName(type, value); if(selected != null) item.Selected = (int)selected == value; enums.Add(item); } return System.Web.Mvc.Html.SelectExtensions.DropDownList(helper, name, enums, "--Select--"); } It is working fine, except for one thing. If I give the dropdown list the same name as the property on my model the selected value is not set properly. Meaning this works: <%= Html.DropDownList("fam", typeof(EnumFamily), Model.Family)%> But this doesn't: <%= Html.DropDownList("family", typeof(EnumFamily), Model.Family)%> Because I'm trying to pass an entire object directly to the controller method I am posting to, I would really like to have the dropdown list named for the property on the model. When using the "right" name, the dropdown does post correctly, I just can't seem to set the selected value. I don't think this matters but I am running MVC 1 on mono 2.6

    Read the article

  • Nunit Relative Path failing

    - by levi.siebens
    I'm having an issue with Nunit where I cannot find an image file when I run my tests and each time it looks for images it looks in the Nunit folder instead of looking inside the folder where the binary resides. Below is a detailed description of what's happening. I'm building a binary that is under test which contains the definition for some game elements and png files which will define the sprites I'm using (for sanity sake call it Binary1) Nunit runs tests from a seperate binary (Binary1Test) executing test methods against the first binary (Binary1). All tests pass, unless the test executes code in Binary1 which then requires Binary1 to use one of the image files (which are defined via a relative path). When the method is called, Nunit throws a file not found exception stating that it cannot find the file and states it's looking inside of the Program Files\Nunit.net 2.0 folder So I have no idea why the code is doing this, and to make matters more confusing when I pull up Enviornment.CurrentDirectory it gives me the correct path (the path to my debug folder) and not the path to nunit. Also if I use this instead of using the relative path, my tests will run without issue. So my question is, does anyone know why in the case of loading relative paths from within my binary that nunit decides to use it's directory instead of the directory where the binary is located and where the images are stored? Thanks.

    Read the article

  • LINQ2SQL - Binding result to a grid - want changes to be reflected without re-binding?

    - by Isaac
    Hello, I have a grid (DevExpress XtraGrid, if that matters) which is bound to a LINQ to SQL Entity property. gridItems.DataSource = purchaseOrder.PendingItemsGrouped; Well, the grid is being displayed properly,and I can see the purchase items that are pending. The problem arises when purchaseOrder.PendingItemsGrouped gets changed ... once that happens, the grid does not reflect the changes. The exact procedure is as following: The user selects a row from the grid, inserts a serial number on a specific textbox, and then hits enter effectively receiving this item from the purchase order, and inserting it into stock. inventoryWorker.AddItemToStock( userSelectedItem, serialNumber ); The item gets properly inserted to the inventory, but the grid still shows the item as if it is still awaiting it to be received. How do I solve this problem? Do I really need to re-bind the grid so the changes can be reflected? I even tried instead of: gridItems.DataSource = ...; This: gridItems.DataBindings.Add( new Binding( "DataSource", purchase, "PendingItemsGrouped" ) ); But couldn't solve the problem. Thank you very much for your time, Isaac. OBS: Re-Binding the Grid works, but my question is ... is that even the proper way of doing things? I feel like I'm miles off the right track.

    Read the article

  • PDFView printWithInfo:autoRotate: fails

    - by Brian Postow
    I'm trying to print a PDFDocument that I am constructing from a series of images. In case it matters, I'm doing all of this from within a Mozilla plugin. I create the PDFDocument, and put it into a PDFView, then I call [printView printWithInfo: [NSPrintInfo sharedPrintInfo] autoRotate: YES]; The print dialog comes up (as a separate window, instead of panel. I assume that that comes from being inside a mozilla window, so I wasn't too worried about it. The dialog shows my document, and I can page through it correctly, and everything looks good. However, when I hit "Print" the dropdown with "Layout" etc becomes empty, and the view under that becomes empty. The window doesn't disappear, and the document doesn't print. Hitting Cancel does exactly the same thing. The only thing I can do then is force-quit Mozillla. I based the program off of PDFKitLinker2 from the apple dev site, and that program works. But I can't see any significant differences between it and my version. Any suggestions on where to look? thanks. EDIT: Yes, I know that this is pretty much an exact duplicate of http://stackoverflow.com/questions/2058501/printing-off-screen-pdfviews but that never got a sufficient answer... (And I didn't notice it until just now...)

    Read the article

  • Environment variable names with parentheses, like %ProgramFiles(x86)%, in PowerShell?

    - by jwfearn
    How does one get the value of environment variable whose name contains parentheses in a PowerShell script? To complicate matters, some variables names contains parentheses while others have similar names without parenteses. For example (using cmd.exe): C:\>set | find "ProgramFiles" CommonProgramFiles=C:\Program Files\Common Files CommonProgramFiles(x86)=C:\Program Files (x86)\Common Files ProgramFiles=C:\Program Files ProgramFiles(x86)=C:\Program Files (x86) We see that %ProgramFiles% is not the same as %ProgramFiles(x86)%. My PowerShell code is failing in a weird way because it's ignoring the part of the environment variable name after the parentheses. Since this happens to match the name of a different, but existing, environment variable I don't fail, I just get the right value of the wrong variable. Here's a test function in the PowerShell scripting language to illustrate my problem: function Do-Test { $ok = "C:\Program Files (x86)" # note space between 's' and '( $bad = "$Env:ProgramFiles" + "(x86)" # uses %ProgramFiles% $bin32 = "$Env:ProgramFiles(x86)" # LINE 6, I want to use %ProgramFiles(x86)% if ( $bin32 -eq $ok ) { Write-Output "Pass" } elseif ( $bin32 -eq $bad ) { Write-Output "Fail: %ProgramFiles% used instead of %ProgramFiles(x86)%" } else { Write-Output "Fail: some other reason" } } And here's the output: PS> Do-Test Fail: %ProgramFiles% used instead of %ProgramFiles(x86)% Is there a simple change I can make to line 6 above to get the correct value of %ProgramFiles(x86)%? *NOTE: In the text of this post I am using batch file syntax for environment variables as a convenient shorthand. For example %SOME_VARIABLE% means "the value of the environment variable whose name is SOME_VARIABLE". If I knew the properly escaped syntax in PowerShell, I wouldn't need to ask this question.*

    Read the article

< Previous Page | 53 54 55 56 57 58 59 60 61 62 63 64  | Next Page >