Search Results

Search found 1886 results on 76 pages for 'vendor neutrality'.

Page 57/76 | < Previous Page | 53 54 55 56 57 58 59 60 61 62 63 64  | Next Page >

• The Internet Key Wave MW833UP is not recognized in Ubuntu

  - by gio900

  I can't use my Onda MW833UP... :( Any advice? Here is something that someone else may understand: ~$: lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 11.10 Release: 11.10 Codename: oneiric ~$: lsusb Bus 001 Device 005: ID 1ee8:0012 ~$: dmesg [ 22.709475] cdc_acm 1-1:1.0: ttyACM0: USB ACM device [ 22.714856] usbcore: registered new interface driver cdc_acm [ 22.714866] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 23.520490] ieee80211 phy0: wl_ops_bss_info_changed: arp filtering: enabled true, count 1 (implement) [ 24.244530] usbcore: registered new interface driver usbserial [ 24.244575] USB Serial support registered for generic [ 24.244673] usbcore: registered new interface driver usbserial_generic [ 24.244681] usbserial: USB Serial Driver core [ 24.265879] USB Serial support registered for GSM modem (1-port) [ 24.285680] usbcore: registered new interface driver option [ 24.285691] option: v0.7.2:USB Driver for GSM modems [ 24.425878] EXT4-fs (sda9): re-mounted. Opts: errors=remount-ro,commit=600 [ 24.736540] EXT4-fs (sda8): re-mounted. Opts: commit=600 [ 35.705796] Easy slow down manager: checking for SABI support. [ 35.706002] Easy slow down manager: SABI is supported (f5189) [ 36.060099] usbcore: deregistering interface driver uvcvideo [ 139.508061] CE: hpet increased min_delta_ns to 20113 nsec [ 6798.378917] usb 1-1: USB disconnect, device number 5 [ 6809.108232] usb 1-1: new high speed USB device number 6 using ehci_hcd [ 6809.242692] scsi5 : usb-storage 1-1:1.0 [ 6810.241257] scsi 5:0:0:0: CD-ROM Onda Datacard CD-ROM 0001 PQ: 0 ANSI: 0 [ 6810.241841] scsi 5:0:0:1: Direct-Access Onda Storage 0001 PQ: 0 ANSI: 0 [ 6810.271410] sr0: scsi3-mmc drive: 0x/0x caddy [ 6810.272099] sr 5:0:0:0: Attached scsi CD-ROM sr0 [ 6810.272852] sr 5:0:0:0: Attached scsi generic sg1 type 5 [ 6810.279954] sd 5:0:0:1: [sdb] Attached SCSI removable disk [ 6810.281210] sd 5:0:0:1: Attached scsi generic sg2 type 0 [ 6810.380591] sr0: CDROM (ioctl) error, command: Xpwrite, Read disk info 51 00 00 00 00 00 00 00 02 00 [ 6810.380617] sr: Sense Key : Hardware Error [current] [ 6810.380625] sr: Add. Sense: No additional sense information [ 6810.613937] sr0: CDROM (ioctl) error, command: Xpwrite, Read disk info 51 00 00 00 00 00 00 00 02 00 [ 6810.613972] sr: Sense Key : Hardware Error [current] [ 6810.613984] sr: Add. Sense: No additional sense information [ 6810.673716] usb 1-1: USB disconnect, device number 6 [ 6815.572142] usb 1-1: new high speed USB device number 7 using ehci_hcd [ 6815.706828] cdc_acm 1-1:1.0: ttyACM0: USB ACM device The last 3 lines are where I inserted the Internet key, then reconnected it. usb-device T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 7 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1ee8 ProdID=0012 Rev=00.01 S: Manufacturer=Onda S: Product=MW833UP S: SerialNumber=9230B35D870F9CB7AE684EACC5C12BE5EC33B26E C: #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=02 Prot=01 Driver=cdc_acm I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_acm Then there is /dev/ttyACM0. When the key is connected to the USB port, everything that will meant...

  Read the article

• Fuji camera "mounts" but folder not in Dolphin After Kubuntu 13.10 upgrade

  - by user207207

  Fuji camera mount reported in attached devices but not visible in Dolphin After Kubuntu 13.10 upgrade Have reinstalled the driver, and a few other suggestions, for other cameras mounts failing on previous Ubuntu upgrades. I have already spent a couple of hours trying to get my photo's off the camera, very annoying. Worked perfectly in 11.04, 11.10, 12.04, 12.10 and 13.04. dmesg | tail; lsusb; lsb_release -a [ 6181.858786] CPUM: APIC 03 at 00000000fee00000 (mapped at ffffc90009400000) - ver 0x80050010, lint0=0x10700 lint1=0x10400 pc=0x00400 thmr=0x10000 [17261.396236] CPUM: APIC 00 at 00000000fee00000 (mapped at ffffc90000c6a000) - ver 0x80050010, lint0=0x10700 lint1=0x00400 pc=0x00400 thmr=0x10000 [17261.396239] CPUM: APIC 03 at 00000000fee00000 (mapped at ffffc90000c72000) - ver 0x80050010, lint0=0x10700 lint1=0x10400 pc=0x00400 thmr=0x10000 [17261.396241] CPUM: APIC 02 at 00000000fee00000 (mapped at ffffc90000c70000) - ver 0x80050010, lint0=0x10700 lint1=0x10400 pc=0x00400 thmr=0x10000 [17261.396255] CPUM: APIC 01 at 00000000fee00000 (mapped at ffffc90000c6e000) - ver 0x80050010, lint0=0x10700 lint1=0x10400 pc=0x00400 thmr=0x10000 [32456.884907] usb 2-5: new high-speed USB device number 2 using ehci-pci [32457.654046] usb 2-5: New USB device found, idVendor=04cb, idProduct=01e8 [32457.654050] usb 2-5: New USB device strings: Mfr=0, Product=2, SerialNumber=3 [32457.654052] usb 2-5: Product: Digital Camera [32457.654053] usb 2-5: SerialNumber: 4C3230302020091117CAA59WP18548 Bus 002 Device 002: ID 04cb:01e8 Fuji Photo Film Co., Ltd Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 003: ID 2013:024f PCTV Systems nanoStick T2 290e Bus 001 Device 002: ID 046d:082d Logitech, Inc. HD Pro Webcam C920 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub No LSB modules are available. Distributor ID: Ubuntu vissibleDescription: Ubuntu 13.10 Release: 13.10 Codename: saucy sudo apt-get install gvfs-bin gvfs-mount gphoto2://[usb:002,002] Error mounting location: Error initializing camera: -108: No such file or directory ...... I have reported a bug in Dolphin, which has been transferred to Solid. Further information : I ran solid-hardware list details udi = '/org/kde/solid/udev/sys/devices/pci0000:00/0000:00:04.1/usb2/2-5' parent = '/org/kde/solid/udev' (string) vendor = '04cb' (string) product = 'Digital Camera' (string) description = 'Camera' (string) Block.major = 189 (0xbd) (int) Block.minor = 137 (0x89) (int) Block.device = '/dev/bus/usb/002/010' (string) Camera.supportedProtocols = {'ptp'} (string list) Camera.supportedDrivers = {'gphoto'} (string list) I still can't get my photo's off, I can see the folders using the Gimp menu. If anyone has got any ideas, I'm willing to try them.

  Read the article

• What are different ways to reduce latency between a server and a web application? [closed]

  - by jjoensuu

  this is a question about a web application that provides SOAP web services. For the sake of this question, this web app is hosted on a server SERVER B which is located in California. We have an automated, scheduled, process running on a server SERVER A, located in New York. This scheduled process is supposed to send SOAP messages to SERVER B every so often, but this process typically dies soon after starting. We have now been told by the vendor that reason why the process dies is because of the latency between SERVER A and SERVER B. The data traffic is routed through many diffent public networks. There is no dedicated line between SERVER A and SERVER B. As a result I have been asked to look into ways to reduce the latency between SERVER A and SERVER B. So I wanted to ask, what are the different ways to reduce latency in a situation like this? For example, would it help to switch from HTTPS to some other secure protocol? (the thought here is that perhaps some other alternative would require fewer handshakes than HTTPS). Or would a VPN help? If a VPN would reduce the latency, how would it do that? NOTE: I am not looking for an explicit answer that would work in my specific situation. I am more like looking just for a simple list of what technologies could be used for this. I will still have to evaluate the technologies and discuss them internally with others, so the list would just be a starting point. Here I am assuming that there exists very few ways to reduce latency between two servers that communicate across public networks using HTTPS. Feel free to correct me if this assumption is wrong and please ask if there is a need for specific information. NOTE 2: A list of technologies is a specific answer to the question I stated in the title. NOTE 3: Its rather dumb to close this question when it is after all about me looking for information and furthermore this information can clearly be useful for others. Anyway luckily there are other sites where I can ask around. StackExchange seems to attached to their own philosophical principles. Many thanks

  Read the article

• Screen brightness dull after upgrade to Ubuntu 14.04

  - by user288426

  After upgrading to Ubuntu 14.04 I found that I could not increase screen brightness. I'm using a Samsung NC110 netbook. Initially the function key to modify brightness did not respond at all. After implementation of the first part of the fix, the key came alive and the brightness bar could be modified. Yet at maximum brightness indicated the screen still remained very dull. The 2nd part of the fix cures that problem, at least for this type of machine. First part of the fix was copied and modified in line with my experience from following post: How to control Brightness Open a terminal (Ctrl + Alt + T). Then type sudo nano /etc/default/grub. It will ask for your password. Type it in. Around the 11th line, there will be something like: GRUB_CMDLINE_LINUX_DEFAULT="quiet splash". Change it to: GRUB_CMDLINE_LINUX_DEFAULT="quiet splash acpi_osi=Linux acpi_backlight=vendor" Save the file by Ctrl+O followed by Ctrl+X. Then run sudo update-grub in the terminal. Reboot and see if backlight adjustment works. Then I needed to modify the rc.local file. Therefore read below fix to understand the procedure: problem with adjusting brightness Ubuntu 14.04 In my case I had 2 folders listed under /sys/class/backlight which were: intel_backlight samsung I realized that the samsung folder is governing. I had to modify the check for max brightness to: cat /sys/class/backlight/samsung/max_brightness In my case the max value obtained is 8. Besides putting this into rc.local, I also had to uncomment the first line to get this working. My rc.local under /etc/ now looks as follows: !/bin/sh -e # # rc.local # # This script is executed at the end of each multiuser runlevel. # Make sure that the script will "exit 0" on success or any other # value on error. # # In order to enable or disable this script just change the execution # bits. # # By default this script does nothing. echo 8 > /sys/class/backlight/samsung/brightness exit 0 Now I can modify brightness on my netbook and also can get the screen up to its maximum brightness. Hope this is helpful.

  Read the article

• EntityRepository not found [migrated]

  - by PachinSV

  I'm new in Doctrine, I'm following the examples in the documentation. I created my entities and everything is working fine until I created a Repository. I have an entity called User and a UserRepository. But when I try to use the User repository I get the error message: Fatal error: Class 'Doctrine\ORM\EntityRepository' not found in C:\xampp\htdocs\excap\repositories\UserRepository.php on line 10 use Doctrine\ORM\EntityRepository; /** * Description of UserRepository * * @author Mario */ class UserRepository extends EntityRepository { How can I solved this? <?php //bootstrap_doctrine.php $isDevMode = true; use Doctrine\ORM\Tools\Setup; require_once 'vendor/autoload.php'; $config = Setup::createAnnotationMetadataConfiguration(array(__DIR__.'/entities'), $isDevMode); $conn = array( 'driver' => 'pdo_mysql', 'user' => 'mydbuser', 'password' => 'mydbpassword', 'dbname' => 'mydbname' ); $entityManager = \Doctrine\ORM\EntityManager::create($conn, $config); ?> <?php //boostrap.php //Entities require_once 'entities/User.php'; require_once 'entities/Gender.php'; require_once 'entities/AccessPoint.php'; //Repositories require_once 'repositories/UserRepository.php'; if(!class_exists("Doctrine\Common\Version", FALSE)) { require_once 'bootstrap_doctrine.php'; } ?> <?php // autoload.php generated by Composer if (!class_exists('Composer\\Autoload\\ClassLoader', false)) { require __DIR__ . '/composer' . '/ClassLoader.php'; } return call_user_func(function() { $loader = new \Composer\Autoload\ClassLoader(); $composerDir = __DIR__ . '/composer'; $map = require $composerDir . '/autoload_namespaces.php'; foreach ($map as $namespace => $path) { $loader->add($namespace, $path); } $classMap = require $composerDir . '/autoload_classmap.php'; if ($classMap) { $loader->addClassMap($classMap); } $loader->register(); return $loader; }); ?>

  Read the article

• Why is firefox 4 not HW accelerated?

  - by acidzombie24

  At first i thought it was my computer but then i tried chrome. Why isnt firefox not hardware accelerated? The first screenshot shows chrome at 23% usage. The 2nd shows 59%. I have 2 cpus which is why it isnt 100% usage. The game pictured is biolab Heres the text for about:support Application Basics Name Firefox Version 4.0 User Agent Mozilla/5.0 (Windows NT 6.1; WOW64; rv:2.0) Gecko/20100101 Firefox/4.0 Profile Directory Open Containing Folder Enabled Plugins about:plugins Build Configuration about:buildconfig Extensions Name Version Enabled ID Modified Preferences Name Value accessibility.typeaheadfind.flashBar 0 browser.places.importBookmarksHTML false browser.places.smartBookmarksVersion 2 browser.startup.homepage_override.buildID 20110303194838 browser.startup.homepage_override.mstone rv:2.0 extensions.lastAppVersion 4.0 gfx.font_rendering.directwrite.enabled true network.cookie.prefsMigrated true places.history.expiration.transient_current_max_pages 127602 privacy.sanitize.migrateFx3Prefs true Graphics Adapter Description Mobile Intel(R) 4 Series Express Chipset Family Vendor ID 8086 Device ID 2a42 Adapter RAM Unknown Adapter Drivers igdumd64 igd10umd64 igdumdx32 igd10umd32 Driver Version 8.15.10.2202 Driver Date 8-25-2010 Direct2D Enabled true DirectWrite Enabled true (6.1.7600.16385, font cache n/a) WebGL Renderer Google Inc. -- ANGLE -- OpenGL ES 2.0 (ANGLE 0.0.0.541) GPU Accelerated Windows 1/1 Direct3D 10

  Read the article

• How to make my SanDisk Cruzer Blade 4GB disk back to normal?

  - by Jack

  Currently, my SanDisk Cruzer Blade 4GB have become a 64MB Firebird RAW flash drive (thumb drive). I don't know why it become like this but when I plug it into a PC, it suddenly transform itself to become a 64MB flash drive. (From 4 GB to 64 MB, that is a huge change!) I read the following articles: http://forums.sandisk.com/t5/All-SanDisk-USB-Flash-Drives/Cruzer-Blade-will-not-format/td-p/214932 http://forums.whirlpool.net.au/archive/1691847 http://forum.hddguru.com/sandiskfirebird-64mb-t23539.html and notice that their solutions does not work at all. Some of their solution is as follows: Using the HP USB Disk Storage Format Tool (http://files.extremeoverclocking.com/file.php?f=1970), which did not work for me as it could not format. Using the h2testw to see if it is genuine, which did not work for me because it is a RAW partition. Return to the vendor, which I doubt since the product only have 1 year warranty and it has expired. I also notice that the flash drive is very fragile as after a few use, the flash drive have become something like the following: (The upper cover of the USB connector was broken or torn) So, wondering if someone have any good solution to fix it back so that at least I can retrieve my data on the fragile thumb drive.

  Read the article

• Mapping Drive Error - System Error 1808

  - by Julian Easterling

  A vendor is attempting to map and preserve a network drive using nt authority/system; so it stays persistent when the interactive session of the server is lost. They were able to do this on one server (Windows 2008 R2) but not a second computer (also Windows 2008 R2). D:\PsExec.exe -s cmd.exe PsExec v1.98 - Execute processes remotely Copyright (C) 2001-2010 Mark Russinovich Sysinternals - www.sysinternals.com Microsoft Windows [Version 6.1.7600] Copyright (c) 2009 Microsoft Corporation. all rights reserved. C:\Windows\system32>whoami nt authority\system C:\Windows\system32>net use New connections will be remembered. Status Local Remote Network -------------------------------------------------------------------- OK X: \\netapp1\share1 Microsoft Windows Network The command completed successfully. C:\Windows\system32>net use q: \\netapp1\share1 System error 1808 has occurred. The account used is a computer account. Use your global user account or local user account to access this server. C:\Windows\system32> I am unsure on how to set up a "machine account mapping" which will preserve the drive letter of the Netapp path being mapped, so that the service account running a Windows service can continue to access the share after interactive logon has expired on the server. Since they were able to do this on one server but not another, I'm not sure how to troubleshoot the problem? Any suggestions?

  Read the article

• Eclipse NullPointerException at getFontList

  - by Jan Fabry

  Eclipse doesn't start anymore. I get a dialog box that points me to a log file with the following entry: !SESSION 2009-12-08 08:49:16.263 ----------------------------------------------- eclipse.buildId=M20090917-0800 java.version=1.6.0_17 java.vendor=Apple Inc. BootLoader constants: OS=macosx, ARCH=x86_64, WS=cocoa, NL=en_US Framework arguments: -product org.eclipse.epp.package.php.product -keyring /Users/cheezy/.eclipse_keyring -showlocation Command-line arguments: -os macosx -ws cocoa -arch x86_64 -product org.eclipse.epp.package.php.product -keyring /Users/cheezy/.eclipse_keyring -showlocation !ENTRY org.eclipse.osgi 4 0 2009-12-08 08:49:19.993 !MESSAGE Application error !STACK 1 java.lang.NullPointerException at org.eclipse.swt.graphics.Device.getFontList(Device.java:369) at org.eclipse.jface.resource.FontRegistry.filterData(FontRegistry.java:465) at org.eclipse.jface.resource.FontRegistry.createFont(FontRegistry.java:499) at org.eclipse.jface.resource.FontRegistry.defaultFontRecord(FontRegistry.java:563) at org.eclipse.jface.resource.FontRegistry.getFontRecord(FontRegistry.java:673) at org.eclipse.jface.resource.FontRegistry.get(FontRegistry.java:613) at org.eclipse.jface.resource.JFaceResources.getDialogFont(JFaceResources.java:273) at org.eclipse.jface.dialogs.Dialog.initializeDialogUnits(Dialog.java:925) at org.eclipse.jface.dialogs.TitleAreaDialog.createContents(TitleAreaDialog.java:131) at org.eclipse.jface.window.Window.create(Window.java:431) at org.eclipse.jface.dialogs.Dialog.create(Dialog.java:1089) at org.eclipse.jface.window.Window.open(Window.java:790) at org.eclipse.ui.internal.ide.ChooseWorkspaceDialog.prompt(ChooseWorkspaceDialog.java:91) at org.eclipse.ui.internal.ide.application.IDEApplication.promptForWorkspace(IDEApplication.java:275) at org.eclipse.ui.internal.ide.application.IDEApplication.checkInstanceLocation(IDEApplication.java:223) at org.eclipse.ui.internal.ide.application.IDEApplication.start(IDEApplication.java:103) at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:194) at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:110) at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:79) at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:368) at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:559) at org.eclipse.equinox.launcher.Main.basicRun(Main.java:514) at org.eclipse.equinox.launcher.Main.run(Main.java:1311) I did clean up my font list in Font Book by disabling duplicate fonts. I also upgraded to Mac OS X 10.6.2.

  Read the article

• SuperMicro BMC on OpenSuSE Linux --cannot access from LAN

  - by Kendall

  Hi, I have an (old) SMC-001 IPMI device on an (old) X6DVL-EG2 motherboard. My problem is that I cannot access the BMC from LAN. I'm also getting some interesting output from ipmitool. First, the setup. I enable Console Redirection in the BIOS, turn BIOS Redirection after POSt to "disabled". I then modprobe'ed for ipmi_msghandler, ipmi_devintf and ipmi_si. I then found ipmi0 under /dev. So far so good. Since I want console redirection over serial, I modified /boot/grub/menu.lst: http://pastebin.com/YYJmhusQ I then modified "/etc/inittab" as follows: S1:12345:respawn:/sbin/agetty -L 19200 ttyS1 ansi Networking I set as following, using "ipmitool" ipaddr: 192.168.3.164 netmask: 255.255.255.0 defgw: 192.168.3.1 The above are correct for my environment. To test it I do: ipmitool -I open chassis power off which responds by powering off the machine. When I to access from another computer on the network, however, I get an error message: host# ipmitool -I lanplus -H 192.168.10.164 -U Admin -a chassis power status Error: Unable to establish LAN session Unable to get Chassis Power Status "Admin" seems to be a valid user name: host# ipmitool -I open user list 1 2 Admin true false true USER The interesting output from ipmitool I initially mentioned: host # ipmitool -I open lan set 1 access on Set Channel Access for channel 1 failed: Request data field length limit exceeded Also, newload4:/home/gjones # ipmitool channel info 1 Channel 0x1 info: Channel Medium Type : 802.3 LAN Channel Protocol Type : IPMB-1.0 Session Support : session-less Active Session Count : 0 Protocol Vendor ID : 7154 Get Channel Access (volatile) failed: Request data field length limit exceeded The output of "ipmitool -I open lan print 1" is here: http://pastebin.com/UZyL6yyE Any help/suggestions is greatly appreciated; I've been working with this thing for a few hours now with no success.

  Read the article

• qemu-img: Could not open $FILE

  - by HTTP500

  I received a single-file VMDK from a vendor that has a virtual appliance for a particular product I'm interested in evaluating. We run a KVM solution (Proxmox) so I tried converting the file but on that system qemu-img blows up. (I was able to convert (multipart) VMDK files from bitnami without error.) So I figured I'll just yum install qemu-img on a RHEL 6.3 VM and do it there. But despite the fact that I can file the file just fine when I run qemu-img on it I get this error that it can't open the file: [root@host dir]# file 1.vmdk 1.vmdk: VMware4 disk image [root@host dir]# qemu-img info 1.vmdk qemu-img: Could not open 'vmdk' I've seen some other people post on the interwebs that they've had this problem but none of them seem to have a resolution. Does anyone have any ideas? I have checked the MD5SUM already. EDIT1: [root@host dir]# qemu-img info -f vmdk 1.vmdk qemu-img: Could not open '1.vmdk' EDIT2: Ran strace per suggestion. Not sure what to look for... Here is a possible: ioctl(3, CDROM_DRIVE_STATUS, 0x7fffffff) = -1 ENOTTY (Inappropriate ioctl for device)

  Read the article

• Can I upgrade the CPU in my Lenovo 3000 N100 laptop?

  - by Pavel

  I've got an Intel Core Duo T2300 in my laptop (Lenovo 3000 N100, 0768-49G). Here is what I could find out about it: $ sudo dmidecode # dmidecode 2.11 SMBIOS 2.4 present. 42 structures occupying 1436 bytes. Table at 0x000DC010. Handle 0x0000, DMI type 0, 24 bytes BIOS Information Vendor: LENOVO Version: 61ET37WW Release Date: 06/04/07 Address: 0xE6B70 [...] Handle 0x0002, DMI type 2, 8 bytes Base Board Information Manufacturer: LENOVO Product Name: CAPELL VALLEY(NAPA) CRB [...] Handle 0x0004, DMI type 4, 35 bytes Processor Information Socket Designation: U2E1 Type: Central Processor Family: Other Manufacturer: Intel ID: E8 06 00 00 FF FB E9 BF Version: Genuine Intel(R) CPU T2300 @ 1.66GHz Voltage: 3.3 V External Clock: 166 MHz Max Speed: 2048 MHz Current Speed: 1600 MHz Status: Populated, Enabled Upgrade: ZIF Socket L1 Cache Handle: 0x0005 L2 Cache Handle: 0x0006 L3 Cache Handle: Not Provided Serial Number: Not Specified Asset Tag: Not Specified Part Number: Not Specified $ cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 14 model name : Genuine Intel(R) CPU T2300 @ 1.66GHz stepping : 8 microcode : 0x39 cpu MHz : 1000.000 cache size : 2048 KB I believe the chipset is "Mobile Intel 945GM Express", but I don't know how to verify it on a Linux system. I'm not sure about the socket, but Intel claims "Sockets Supported: PBGA479, PPGA478". Now, I'd like to upgrade to the fastest compatible CPU available, but I'm a bit lost in all the details. Can you guys help me out with a couple of questions, please? What CPUs can I choose from? (I think it's only the Core2Duo line, but it should be enough for an upgrade) Can I use a 64-bit CPU? Can I use a CPU with a higher FSB than 667 MHz? Do I have to worry about additional cooling, or is it enough to check for similar voltage/TDP values? Thank you!

  Read the article

• How to inspect remote SMTP server's TLS certificate?

  - by Miles Erickson

  We have an Exchange 2007 server running on Windows Server 2008. Our client uses another vendor's mail server. Their security policies require us to use enforced TLS. This was working fine until recently. Now, when Exchange tries to deliver mail to the client's server, it logs the following: A secure connection to domain-secured domain 'ourclient.com' on connector 'Default external mail' could not be established because the validation of the Transport Layer Security (TLS) certificate for ourclient.com failed with status 'UntrustedRoot. Contact the administrator of ourclient.com to resolve the problem, or remove the domain from the domain-secured list. Removing ourclient.com from the TLSSendDomainSecureList causes messages to be delivered successfully using opportunistic TLS, but this is a temporary workaround at best. The client is an extremely large, security-sensitive international corporation. Our IT contact there claims to be unaware of any changes to their TLS certificate. I have asked him repeatedly to please identify the authority that generated the certificate so that I can troubleshoot the validation error, but so far he has been unable to provide an answer. For all I know, our client could have replaced their valid TLS certificate with one from an in-house certificate authority. Does anyone know a way to manually inspect a remote SMTP server's TLS certificate, as one can do for a remote HTTPS server's certificate in a web browser? It could be very helpful to determine who issued the certificate and compare that information against the list of trusted root certificates on our Exchange server.

  Read the article

• Is it necessary to burn-in RAM for server-class systems?

  - by ewwhite

  When using server-class systems with ECC RAM, is it necessary or even useful to burn-in the memory DIMMs prior to deployment? I've encountered an environment where all server RAM is placed through a lengthy multi-day burn-in/stress-tesing process. This has delayed system deployments on occasion and adds an extra step to the hardware lead-time. The server hardware is primarily Supermicro, so the RAM is sourced from a variety of vendors; not directly from the manufacturer like a Dell Poweredge or HP ProLiant. Is this process useful? In my past experience, I simply used vendor RAM out of the box. Isn't that what the POST memory tests are for? I've encountered and responded to ECC errors long before a DIMM actually failed. The ECC thresholds were usually the trigger for warranty placement. Do you burn your RAM in? If so, what method do you use to perform the tests? Has the burn-in process resulted in any additional platform stability? Has it identified any pre-deployment problems?

  Read the article

• Problems with freetype on OSX 10.7.4

  - by eythor

  I'm trying to install mplayer with OSD using homebrew. I've added both --enable-menu and --with-freetype-config=/usr/local/Cellar/freetype/2.4.10/freetype-config to the brew recipe. ==> Downloading http://www.mplayerhq.hu/MPlayer/releases/MPlayer-1.1.tar.xz Already downloaded: /Library/Caches/Homebrew/mplayer-1.1.tar.xz xz -dc "/Library/Caches/Homebrew/mplayer-1.1.tar.xz" | /usr/bin/tar xf - ==> ./configure --prefix=/usr/local/Cellar/mplayer/1.1 --cc=cc --host-cc=cc --disable-cdparanoia --disable-libopenjpeg --enable-menu --disable-x11 -- with-freetype-config=/usr/local/Cellar/freetype/2.4.10/freetype-config ./configure --prefix=/usr/local/Cellar/mplayer/1.1 --cc=cc --host-cc=cc --disable-cdparanoia --disable-libopenjpeg --enable-menu --disable-x11 --with -freetype-config=/usr/local/Cellar/freetype/2.4.10/freetype-config Checking for cc version ... clang 4.2.1 (experimental support only) Checking for working compiler ... yes Detected operating system: Darwin Detected host architecture: x86_64 Checking for cross compilation ... no Checking for host cc ... cc Checking for CPU vendor ... GenuineIntel (6:15:10) Checking for CPU type ... Intel(R) Core(TM)2 Duo CPU T7700 @ 2.40GHz For freetype-config I've tried three seperate paths; /usr/X11R6/bin/freetype-config, /usr/X11/bin/freetype-config and the one in Cellar. Checking for freetype always fails: Checking for freetype >= 2.0.9 ... no Checking for fontconfig ... no (FreeType support needed) Although freetype itself seems to be installed. mufasa:bin eythor$ freetype-config --version 15.0.9 mufasa:bin eythor$ freetype-config --ftversion 2.4.10 mufasa:bin eythor$ freetype-config --libs -L/usr/local/Cellar/freetype/2.4.10/lib -lfreetype -lz -lbz2 mufasa:bin eythor$ freetype-config --cflags -I/usr/local/Cellar/freetype/2.4.10/include/freetype2 - I/usr/local/Cellar/freetype/2.4.10/include I'm not sure what to try next or how to figure out why freetype isn't recognized. Can anyone point me in a sensible direction?

  Read the article

• Disabling CPU management

  - by Tiffany Walker

  If I add the following processor.max_cstate=0 to the kernel command line for boot up, does that disable all CPU power management and throttling? I also found: http://www.experts-exchange.com/OS/Linux/Administration/A_3492-Avoiding-CPU-speed-scaling-in-modern-Linux-distributions-Running-CPU-at-full-speed-Tips.html The link talks of Change CPU governor from 'ondemand' to 'performance' for all CPUs/cores and disabling kondemand from kernel. Server is for web hosting UPDATES: 2.6.32-379.1.1.lve1.1.7.6.el6.x86_64 #1 SMP Sat Aug 4 09:56:37 EDT 2012 x86_64 x86_64 x86_64 GNU/Linux . # dmidecode 2.11 SMBIOS 2.6 present. 74 structures occupying 2878 bytes. Table at 0x0009F000. Handle 0x0000, DMI type 0, 24 bytes BIOS Information Vendor: American Megatrends Inc. Version: 1.0c Release Date: 05/27/2010 Address: 0xF0000 Runtime Size: 64 kB ROM Size: 4096 kB Characteristics: ISA is supported PCI is supported PNP is supported BIOS is upgradeable BIOS shadowing is allowed ESCD support is available Boot from CD is supported Selectable boot is supported BIOS ROM is socketed EDD is supported 5.25"/1.2 MB floppy services are supported (int 13h) 3.5"/720 kB floppy services are supported (int 13h) 3.5"/2.88 MB floppy services are supported (int 13h) Print screen service is supported (int 5h) 8042 keyboard services are supported (int 9h) Serial services are supported (int 14h) Printer services are supported (int 17h) CGA/mono video services are supported (int 10h) ACPI is supported USB legacy is supported LS-120 boot is supported ATAPI Zip drive boot is supported BIOS boot specification is supported Targeted content distribution is supported BIOS Revision: 8.16 Handle 0x0001, DMI type 1, 27 bytes System Information Manufacturer: Supermicro Product Name: X8SIE Version: 0123456789 Serial Number: 0123456789 UUID: 49434D53-0200-9033-2500-33902500D52C Wake-up Type: Power Switch SKU Number: To Be Filled By O.E.M. Family: To Be Filled By O.E.M. Handle 0x0002, DMI type 2, 15 bytes Base Board Information Manufacturer: Supermicro Product Name: X8SIE Version: 0123456789 Serial Number: VM11S61561 Asset Tag: To Be Filled By O.E.M. Features: Board is a hosting board Board is replaceable Location In Chassis: To Be Filled By O.E.M. Chassis Handle: 0x0003 Type: Motherboard Contained Object Handles: 0 Handle 0x0003, DMI type 3, 21 bytes Chassis Information Manufacturer: Supermicro Type: Sealed-case PC Lock: Not Present Version: 0123456789 Serial Number: 0123456789 Asset Tag: To Be Filled By O.E.M. Boot-up State: Safe Power Supply State: Safe Thermal State: Safe Security Status: None OEM Information: 0x00000000 Height: Unspecified Number Of Power Cords: 1 Contained Elements: 0

  Read the article

• Remote Sending of Emails via SMTP/EXIM Issue

  - by Christian Noel

  I have been encountering a problem when sending messages via EXIM. Here is the scenario: I have 2 servers lets just say host1.com = where all my apps and programs are hosted. host2.com = is another server which handles some apps but is also my smtp mail server. whm and cpanel are installed in both hosts as well as exim. right now, messages are being sent out as [email protected] to clients. host1.com uses the [email protected] so that it can send messages outbound as well. here's the problem, after a few hours from a fresh reboot of host1.com, sending messages from host1.com is no longer possible because i encounter an error that states: system/vendor/swift/Swift/Connection/SMTP.php [309]: The SMTP connection failed to start [tls://mail.host2.com]: fsockopen returned Error Number 110 and Error String 'Connection timed out'` also note that this was working fine earlier (like 10 hours ago) but then it suddenly fails. everytime i restart the host1.com then sending messages will work again. i have checked logs and traces but to no avail the only means of fixing this problem is restarting host1.com.

  Read the article

• Internal but no external Citrix Access?

  - by leeand00

  We recently had to reload our configuration of Citrix on our server Server1, and since we have, we can access Citrix internally, but not externally. Normally we access Citrix from http://remote.xyz.org/Citrix/XenApp but since the configuration was reloaded we are met with a Service Unavailable message. Internally accessing the Citrix web application from http://localhost/Citrix/XenApp/ on Server1 we are able to access the web application. And also from machines on our local network using http://Server1/Citrix/XenApp/. I have gone into the Citrix Access Management Console and from the tree pane on the left clicked on Citrix Access Management Console->Citrix Resources->Configuration Tools->Web Interface->http://remote.xyz.org/Citrix/PNAgent Citrix Access Management Console->Citrix Resources->Configuration Tools->Web Interface->http://remote.xyz.org/Citrix/XenApp, which in both cases displays a screen that reads Secure client access. Here it offers me several options: Direct, Alternate, Translated, Gateway Direct, Gateway Alternate, Gateway Translated. I know that I can change the method of use by clicking Manage secure client access->Edit secure client access settings which opens a window that reads "Specify Access Methods", and below that reads "Specify details of the DMZ settings, including IP address, mask, and associated access method", I don't know what the original settings were, and I also don't know how our DMZ is configured so that I can specify the correct settings, to give access to our external users on the http://remote.xyz.org/Citrix/XenApp site. We have a vendor who setup our DMZ and does not allow us access to the gateway to see these settings. What sorts of questions should I ask them to restore remote access?

  Read the article

• 4.00gb (3.25gb usable) in Windows 7 x64

  - by dotnetdev

  Hi, I have setup Windows 7 Ultimate x64 on my PC. I have 4gb RAM and my BIOS states the correct amount (4096mb), but I cannot Windows (System Manager) says I have 4.00gb (3.25gb usable). This seems to be a popular issue, and I have looked for an integrated video card (integrated with my chipset) to disable but haven't found anything. What else can be preventing me from seeing all 4gb? When I had Vista 32bit, it would say 3.25gb RAM not 4.00gb (3.25gb usable). I have an x64 CPU and when I brought my RAM, I used a compatibility tool from Crucial (the memory vendor) to test how much memory my PC can support and 4gb was the answer (this was a windows app I think). Chipset is Intel(R) G33/G31/P35/P31 Express Chipset PCI Express In the bios, I looked for an onboard video card (integrated) and there was no such thing, but a couple of other onboard devices. There are also no "Resource Mappings" settings. FURHTER DETAILS: Chipset North Bridge: Intel Bearlake G33 South Bridge: Intel 82801IR ICH9R Maximum Memory Amount 8 GB Graphics Controller Type Intel GMA 3100 (Enabled) I guess the first thing is, how do I disable the graphics controller? EDIT: This thread (http://forums.legitreviews.com/about23417.html) indicates the issue is with memory mapped devices, but someone on this thread says that does not apply to x64. The rest of the comments points to a mobo issue for the guy who started that thread. Thanks

  Read the article

• mcelog doesn't fails to start PUIAS 6.4 amd hardware

  - by Predrag Punosevac

  Folks, I am a total Linux n00b. I am trying to deploy mcelog on one of my computing nodes running PUIAS 6.4 (i86_64) [root@lov3 edac]# uname -a Linux lov3.mylab.org 2.6.32-358.18.1.el6.x86_64 #1 SMP Tue Aug 27 22:40:32 EDT 2013 x86_64 x86_64 x86_64 GNU/Linux a free clone of Red Hat 6.4 on AMD hardware [root@lov3 mcelog]# lscpu Architecture: x86_64 CPU op-mode(s): 32-bit, 64-bit Byte Order: Little Endian CPU(s): 64 On-line CPU(s) list: 0-63 Thread(s) per core: 2 Core(s) per socket: 8 Socket(s): 4 NUMA node(s): 8 Vendor ID: AuthenticAMD CPU family: 21 Model: 2 Stepping: 0 CPU MHz: 1400.000 BogoMIPS: 4999.30 Virtualization: AMD-V L1d cache: 16K L1i cache: 64K L2 cache: 2048K L3 cache: 6144K NUMA node0 CPU(s): 0-7 NUMA node1 CPU(s): 8-15 NUMA node2 CPU(s): 16-23 NUMA node3 CPU(s): 24-31 NUMA node4 CPU(s): 32-39 NUMA node5 CPU(s): 40-47 NUMA node6 CPU(s): 48-55 NUMA node7 CPU(s): 56-63 My mcelog.conf file is more or less default apart of the fact that I would like to run mcelog as a daemon and to log errors. When I start mcelog [root@lov3 mcelog]# mcelog --config-file mcelog.conf AMD Processor family 21: Please load edac_mce_amd module. However the module is present [root@lov3 mcelog]# locate edac_mce_amd.ko /lib/modules/2.6.32-358.18.1.el6.x86_64/kernel/drivers/edac/edac_mce_amd.ko /lib/modules/2.6.32-358.el6.x86_64/kernel/drivers/edac/edac_mce_amd.ko and loaded [root@lov3 edac]# lsmod | grep mce edac_mce_amd 14705 1 amd64_edac_mod Is there anything that I can do to get mcelog working? The only reference I found is this thread http://lists.centos.org/pipermail/centos/2012-November/130226.html

  Read the article

• Ping: sendmsg: operation not permitted error after installing iptables on Arch GNU/Linux

  - by estol

  Yesterday I got a new computer as my homeserver, a HP Proliant Microserver. Installed Arch Linux on it, with kernel version 3.2.12. After installing iptables (1.4.12.2 - the current version afaik) and changing the net.ipv4.ip_forward key to 1, and enabling forwarding in the iptables configuration file (and rebooting), the system cannot use any of its network itnerfaces. Ping fails with Ping: sendmsg: operation not permitted If I remove iptables completely, networking is okay, but I need to share the Internet connection to the local network. eth0 - wan NIC integrated on the motherboard (no idea of vendor, probably HP). eth1 - lan NIC in a pci-express slot (Intel Gigabit CT Desktop http://www.intel.com/content/www/us/en/network-adapters/gigabit-network-adapters/gigabit-ct-desktop-adapter.html) Since it works without iptables(server can access the internet, and I can login with ssh from the internal network), I assume it has something to do with iptables. I do not have much experience with iptables, so I used these as reference (separate from each other of course...): wiki.archlinux.org/index.php/Simple_stateful_firewall#Setting_up_a_NAT_gateway revsys.com/writings/quicktips/nat.html howtoforge.com/nat_iptables On my previous server, I used the revsys guide to set up nat, worked like a charm. Anyone experienced anything like this before? What am I doing wrong? Thanks, estol

  Read the article

• Options for synchronizing Palm Desktop calendars

  - by Al Everett

  My wife and I each have Palm Centro phones and very full calendars. We've been using Palm products for years and are happy with them and are not looking to switch (and don't have the budget for it even if we wanted to). What is a viable way we can synchronize our calendars? Back when we had Palm Z22s we used AirSet. It worked great in synchronizing our desktop calendars. Unfortunately, their sync software does not support Palm Desktop v6 and there is nothing in the pipeline to support it. (The third party vendor is apparently not interested in updating for the newer Palm desktop.) I would love to be able to get back to having each other's appointments appear on the other's calendar. What can we do? Some limitations: A data plan is not an option (so this precludes over-the-air synchronization options) No Microsoft Outlook Edit: Syncing my Palm to my Palm Desktop is not the issue. Being able to sync, in some way, the Palm calendar databases of my wife's and my calendars is what's desired.

  Read the article

• How do I get a Mac to request a new IP address from another DHCP server running in parallel while Ne

  - by huyqt

  Hello, I have an interesting situation. I'm trying to us a Linux based machine to allow Mac's to Netboot (similiar to PXE boot) by running a DHCP service in parallel with the "global" DHCP server. The local DHCP server hands out IPs in a private subnet, e.g., 10.168.0.10-10.168.254-254, while the "global" DHCP server hands out IPs from the IP range 10.0.0.1 - 10.0.1.254. The local DHCP range is only supposed to be used in Preboot Execution Environment and Netboot. The local DHCP server is something I have control over, but I do not have access to the global DHCP server. I have a filter to only allow members with the vendor strings "AAPLBSDPC/i386" and "PXEClient". PXE works fine, but Netboot has a quirk. The Apple systems that haven't been connected to the network yet can Netboot fine. But once it grabs a "real" IP address from the global DHCP server, it will "save" it and request it the next time we want it to netboot (which the local dhcp server won't give it). This is what I want: Mar 30 10:52:28 dev01 dhcpd: DHCPDISCOVER from 34:15:xx:xx:xx:xx via eth1 Mar 30 10:52:29 dev01 dhcpd: DHCPOFFER on 10.168.222.46 to 34:15:xx:xx:xx:xx via eth1 Mar 30 10:52:31 dev01 dhcpd: DHCPREQUEST for 10.168.222.46 (10.168.0.1) from 34:15:xx:xx:xx:xx via eth1 Mar 30 10:52:31 dev01 dhcpd: DHCPACK on 10.168.222.46 to 34:15:xx:xx:xx:xx via eth1 Mar 30 10:52:32 dev01 in.tftpd[5890]: tftp: client does not accept options Mar 30 10:52:53 dev01 in.tftpd[5891]: tftp: client does not accept options Mar 30 10:52:53 dev01 in.tftpd[5893]: tftp: client does not accept options Mar 30 10:52:54 dev01 in.tftpd[5895]: tftp: client does not accept options This is what I get when it already has a "stored" IP: Mar 30 10:51:29 dev01 dhcpd: DHCPDISCOVER from 00:25:xx:xx:xx:xx via eth1 Mar 30 10:51:30 dev01 dhcpd: DHCPOFFER on 10.168.222.45 to 00:25:xx:xx:xx:xx via eth1 Mar 30 10:51:31 dev01 dhcpd: DHCPREQUEST for 10.0.0.61 (10.0.0.1) from 00:25:xx:xx:xx:xx via eth1: ignored (not authoritative). Do you have any suggestions? It would be much appreciated.

  Read the article

• what is uninstall procedure for software installed via "make install" on CentOS 6.2

  - by gkdsp

  I installed OCILIB on my CentOS 6.2 server some time ago, and now I want to install a newer version. The vendor requires an uninstall, but doesn't provide instructions. I'm guessing that's because it's trivial for people with a Linux background. http://orclib.sourceforge.net/doc/html/group_g_install.html If I installed this software using: step 1: # ./configure --with-oracle-headers-path=/usr/include/oracle/11.2/client64 --with-oracle-lib-path=/usr/lib/oracle/11.2/client64/lib step 2: # make step 3: # su root step 4: # make install step 5: # gcc -g -DOCI_IMPORT_LINKAGE -DOCI_CHARSET_ANSI -L/usr/lib/oracle/11.2/client64/lib -lclntsh -L/usr/local/lib -locilib conn.c -o conn How would I go about uninstalling this? I tried following this http://www.cyberciti.biz/faq/delete-uninstall-software-linux-commands/ but nothing was found on my disk using rpm -qa *oci* or yum list *oci*. Maybe since it wasn't installed with yum or rpm then I shouldn't expect either of these to find it. Are there generic instructions for uninstalling software on Linux that I could use, or do the instructions really depend on the specific software? Any help much appreciated.

  Read the article

• To update or to not update?

  - by Massimo

  Since starting working where I am working now, I've been in an endless struggle with my boss and coworkers in regard to updating systems. I of course totally agree that any update (be it firmware, O.S. or application) should not be applied carelessly as soon as it comes out, but I also firmly believe that there should be at least some reason if the vendor released it; and the most common reason is usually fixing some bug... which maybe you're not experiencing now, but you could be experiencing soon if you don't keep up with . This is especially true for security fixes; as an examle, had anyone simply applied a patch that had already been available for months, the infamous SQL Slammer worm would have been harmless. I'm all for testing and evaluating updates before deployng them; but I strongly disagree with the "if it's not broken then don't touch it" approach to systems management, and it genuinely hurts me when I find production Windows 2003 SP1 or ESX 3.5 Update 2 systems, and the only answer I can get is "it's working, we don't want to break it". What do you think about this? What is your policy? And what is your company policy, if it doesn't match your own?

  Read the article

< Previous Page | 53 54 55 56 57 58 59 60 61 62 63 64  | Next Page >