Search Results

Search found 14377 results on 576 pages for 'video card'.

Page 57/576 | < Previous Page | 53 54 55 56 57 58 59 60 61 62 63 64  | Next Page >

• 3 Monitor PCI-e Graphics card on Linux (without tremendous pain)?

  - by N Rahl

  As we are all painfully aware, the only way to get multiple monitors AND compositing (Compiz) on Linux is to use a single graphics card that can drive both (or in my case all three) screens. I bought a Radeon 5750 specifically because it claims to able to drive 3 monitors. I can plug in 3 monitors (2 DVI, 1 HDMI) and the Catalyst Control Center shows all 3, but only 2 can be enabled at a time. The exact message is: The current settings cannot be applied. Possible issues may include: - Display(s) cannot be enabled. - Setting(s) cannot be applied due to insufficient video memory. So I'm going to assume that either the 5750 doesn't support 3 monitors, OR, more likely, ATI couldn't be bothered to add that support to their Linux drivers. So this is a multipart question: First, can anyone suggest a PCI Express Graphics card that can run 3 screens on linux without tremendous pain? I'm looking for something where you install the driver and all three screens "just work". Does such a card exist? Second, if you have a 5750, have you been able to get it to do 3 monitors? I'm running Ubuntu 10.04 at the moment.

  Read the article

• Linux: 3 Monitor PCI-e Graphics card (without tremendous pain)?

  - by N Rahl

  As we are all painfully aware, the only way to get multiple monitors AND compositing (Compiz) on Linux is to use a single graphics card that can drive both (or in my case all three) screens. I bought a Radeon 5750 specifically because it claims to able to drive 3 monitors. I can plug in 3 monitors (2 DVI, 1 HDMI) and the Catalyst Control Center shows all 3, but only 2 can be enabled at a time. I'll post the exact error message here soon, but it's very useless. So I'm going to assume that either the 5750 doesn't support 3 monitors, OR, more likely, ATI couldn't be bothered to add that support to their Linux drivers. So this is a multipart question: First, can anyone suggest a PCI Express Graphics card that can run 3 screens on linux without tremendous pain? I'm looking for something where you install the driver and all three screens "just work". Does such a card exist? Second, if you have a 5750, have you been able to get it to do 3 monitors? I'm running Ubuntu 10.04 at the moment. Thanks, Nick

  Read the article

• 3 Monitor PCI-e Graphics card (without tremendous pain)?

  - by N Rahl

  As we are all painfully aware, the only way to get multiple monitors AND compositing (Compiz) on Linux is to use a single graphics card that can drive both (or in my case all three) screens. I bought a Radeon 5750 specifically because it claims to able to drive 3 monitors. I can plug in 3 monitors (2 DVI, 1 HDMI) and the Catalyst Control Center shows all 3, but only 2 can be enabled at a time. The exact message is: The current settings cannot be applied. Possible issues may include: - Display(s) cannot be enabled. - Setting(s) cannot be applied due to insufficient video memory. So I'm going to assume that either the 5750 doesn't support 3 monitors, OR, more likely, ATI couldn't be bothered to add that support to their Linux drivers. So this is a multipart question: First, can anyone suggest a PCI Express Graphics card that can run 3 screens on linux without tremendous pain? I'm looking for something where you install the driver and all three screens "just work". Does such a card exist? Second, if you have a 5750, have you been able to get it to do 3 monitors? I'm running Ubuntu 10.04 at the moment.

  Read the article

• Convert a DVD Movie Directly to AVI with FairUse Wizard 2.9

  - by DigitalGeekery

  Are you looking for a way to backup your DVD movie collection to AVI?  Today we’ll show you how to rip a DVD movie directly to AVI with FairUse Wizard. About FairUse Wizard FairUse Wizard 2.9 uses the DivX, Xvid, or h.264 codec to convert DVD to an AVI file. It comes in both a free version and commercial version. The free, or “Light” version, can create files up 700MB while the commercial version can output a 1400MB file. This will allow you to back up your movies to CD, or even multiple movies on a single DVD. FairUse Wizard states that it does not work on copy protected discs, but we’ve seen it work on all but some of the most recent copy protection. For this tutorial we’re using the free Light Edition to convert a DVD to AVI. They also offer a commercial version that you can get for $29.99 and it offers even more encoding possibilities for converting video to you portable digital devices. Installation and Configuration Download and install FairUse Wizard. (Download link below). Once the install is complete, open FairUse Wizard by going to Start > All Programs >  FairUse Wizard 2 >  FairUse Wizard 2.   FairUse Wizard will open on the new project screen. Select “Create a new project” and type a project name into the text box. This will be used as the file output name.  Ex: A project name of Simpsons Movie will give you an output file of Simpsons Movie.avi.   Next, browse for a destination folder for the output file and temp files. Note that you will need a minimum of 6 GB of free disk space for the conversion process. Note: Much of that 6 GB will be used for temporary files that we will delete after the conversion process.   Click on the Options button at the bottom.   Under Preferences, choose your preferred video codec and file output size. XviD and x264 are installed by default. If you prefer to use DivX, you will have to install it separately. Also note the “Two pass” option. Checking the “Two pass” box will encode your video twice for higher quality, but will take more time. Un-checking the box will speed up the conversion process.   Under Audio track, note that English subtitles are enabled by default, so to remove the subtitles, you will need to change the dropdown list so it shows only a dash (-). You can also select “Use TV Mode” if your primary playback will be on a 4:3 TV screen. Click “Next.” Full Auto Mode vs. Manual Mode You should now be back to the initial screen. Next, we’ll need to determine whether or not we can use “Full Auto Mode” to convert the movie. The difference is that “Full Auto Mode” will automatically perform a few steps that you will otherwise have to do manually. If you choose the “Full Auto Mode” option, FairUse Wizard will look for the video on the DVD with the longest duration and assume it is the chain that it should convert to AVI. It’s possible, however, your disc may contain a few chains of similar size, such as a theatrical cut and director’s cut, and the longest chain may not be the one you wish to convert. Make sure that “Full auto mode” is not checked yet, and click “Next.”   FairUse Wizard will parse the IFO files and display all video chains longer than 60  seconds. In most cases, you will only find that the largest chain is the one closely matching the duration of the movie. In these instances, you can use “Full Auto Mode.” If you find more than one chain that are close in duration to the length of the movie, consult the literature on the DVD case, or search online, to find the actual running time of the movie. If the proper file chain is not the longest chain, you won’t be able to use “Full Auto Mode.”   Full Auto Mode To use “Full Auto Mode,” simply click the “Back” button to return to the initial screen Now, place a check in the “Full auto mode” check box. Click “Next.” You will then be prompted to chose your DVD drive, then click “OK.” FairUse Wizard will parse the IFO files… … and then prompt you to Select your drive that contains the DVD one more time before beginning the conversion process. Click “OK.”   Manual Mode If you cannot (or don’t wish to) use Full Auto Mode, choose the appropriate video chain and click “Next.” FairUse Wizard will first go through the process of indexing the video. Note: If you get a runtime error during this portion of the process, it likely means that FairUse Wizard cannot handle the copy protection, and thus cannot convert the DVD. FairUse Wizard will automatically detect a cropping region. If necessary, you can edit the cropping region by adjusting the cropping region settings to the left. Click “Next.” Next, click “Auto Detect” to choose the proper field combination. Click “OK” on the pop up window that displays your Field Mode. Then click “Next.” This next screen is mainly comprised of settings from the Options screen. You can make changes at this point such as codec or output size. Click “Next” when ready.   Video Conversion Now the video conversion process will begin. This may take a few hours depending on your system’s hardware. Note: There is a check box to “Shutdown computer when done” if you choose to run the conversion overnight or before leaving for work. The first phase will be video encoding… Then the audio… If you chose the “Two Pass” option, your video video will be encoded again on 2nd pass. Then you’re finished. Unfortunately, FairUse Wizard doesn’t clean up after itself very well. After the process is complete, you’ll want to browse to your output directory and delete all the temporary files as they take up a considerable amount of hard drive space. Now you’re ready to enjoy your movie. Conclusion FairUse Wizard is a nice way to backup your DVD movies to good quality .avi files. You can store them on your hard drive, watch them on a media PC, or burn them to disc. Many DVD players even allow for playback of DivX or XviD encoded video from a CD or DVD. For those of you with children, you can burn that AVI file to CD for your kids, and keep your original DVDs stored safely out of harms way. Download Download FairUse Wizard 2.9 LE Similar Articles Productive Geek Tips Kantaris is a Unique Media Player Based on VLCHow to Make/Edit a movie with Windows Movie Maker in Windows VistaAutomatically Mount and View ISO files in Windows 7 Media CenterTune Your ClearType Font Settings in Windows VistaAdd Images and Metadata to Windows 7 Media Center Movie Library TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Make your Joomla & Drupal Sites Mobile with OSMOBI Integrate Twitter and Delicious and Make Life Easier Design Your Web Pages Using the Golden Ratio Worldwide Growth of the Internet How to Find Your Mac Address Use My TextTools to Edit and Organize Text

  Read the article

• How do I resolve this exercise on C++? [closed]

  - by user40630

  (Card Shuffling and Dealing) Create a program to shuffle and deal a deck of cards. The program should consist of class Card, class DeckOfCards and a driver program. Class Card should provide: a) Data members face and suit of type int. b) A constructor that receives two ints representing the face and suit and uses them to initialize the data members. c) Two static arrays of strings representing the faces and suits. d) A toString function that returns the Card as a string in the form “face of suit.” You can use the + operator to concatenate strings. Class DeckOfCards should contain: a) A vector of Cards named deck to store the Cards. b) An integer currentCard representing the next card to deal. c) A default constructor that initializes the Cards in the deck. The constructor should use vector function push_back to add each Card to the end of the vector after the Card is created and initialized. This should be done for each of the 52 Cards in the deck. d) A shuffle function that shuffles the Cards in the deck. The shuffle algorithm should iterate through the vector of Cards. For each Card, randomly select another Card in the deck and swap the two Cards. e) A dealCard function that returns the next Card object from the deck. f) A moreCards function that returns a bool value indicating whether there are more Cards to deal. The driver program should create a DeckOfCards object, shuffle the cards, then deal the 52 cards. This above is the exercise I'm trying to solve. I'd be very much appreciated if someone could solve it and explain it to me. The main idea of the program is quite simple. What I don't get is how to build the constructor for the class DeckOfCards and how to generate the 52 cards of the deck with different suits and faces. Untill now I've managed to do this: #include <iostream> #include <vector> using namespace std; /* * */ /* a) Data members face and suit of type int. b) A constructor that receives two ints representing the face and suit and uses them to initialize the data members. c) Two static arrays of strings representing the faces and suits. d) A toString function that returns the Card as a string in the form “face of suit.” You can use the + operator to concatenate strings. */ class Card { public: Card(int, int); string toString(); private: int suit, face; static string faceNames[13]; static string suitNames[4]; }; string Card::faceNames[13] = {"Ace","Two","Three","Four","Five","Six","Seven","Eight","Nine","Ten","Queen","Jack","King"}; string Card::suitNames[4] = {"Diamonds","Clubs","Hearts","Spades"}; string Card::toString() { return faceNames[face]+" of "+suitNames[suit]; } Card::Card(int f, int s) :face(f), suit(s) { } /* Class DeckOfCards should contain: a) A vector of Cards named deck to store the Cards. b) An integer currentCard representing the next card to deal. c) A default constructor that initializes the Cards in the deck. The constructor should use vector function push_back to add each Card to the end of the vector after the Card is created and initialized. This should be done for each of the 52 Cards in the deck. d) A shuffle function that shuffles the Cards in the deck. The shuffle algorithm should iterate through the vector of Cards. For each Card, randomly select another Card in the deck and swap the two Cards. e) A dealCard function that returns the next Card object from the deck. f) A moreCards function that returns a bool value indicating whether there are more Cards to deal. */ class DeckOfCards { public: DeckOfCards(); void shuffleCards(); Card dealCard(); bool moreCards(); private: vector<Card> deck(52); int currentCard; }; int main(int argc, char** argv) { return 0; } DeckOfCards::DeckOfCards() { //I'm stuck here I have no idea of what to take out of here. //I still don't fully get the idea of class inside class and that's turning out as a problem. I try to find a way to set the suits and faces members of the class Card but I can't figure out how. for(int i=0; i<deck.size(); i++) { deck[i]//....There is no function to set them. They must be set when initialized. But how?? } } For easier reading: http://pastebin.com/pJeXMH0f

  Read the article

• EMV credit/debit card chip application

  - by rohitamitpathak

  I am working in smart card industry and familiar with ISO 7816 and Java Card. Till now I worked for ID card, Health card and SIM application using GSM standard. Now I have a chance to work in EMV. Here I have some confusion like: Is a EMV credit/debit card will be a java card containing applet inside it? what standard I need to go through to develop emv debit/credit card application? Is there any good tutorial which helps to understand about EMV debit/credit Card application development? Is there any good simulator to develop and test emv card application?

  Read the article

• SQL SERVER – Two Puzzles – Answer and Win USD 25 Gift Card

  - by pinaldave

  Today I have two simple T-SQL Puzzle. You can answer them and win USD 25 Gift card. The gift card will be sent in email to winner. You will get choice of Gift Card brand based on your preference and country location. Puzzle 1: What will be the outcome and why? DECLARE @x REAL; SET @x = 9E-40 SELECT @x; The outcome here is obvious as I have used negative number in assignment. What is the reason behind the same? Puzzle 2: Why will be the outcome different from Puzzle 1: DECLARE @y REAL; SET @y = 9E+40 SELECT @y; The outcome of this puzzle very different from puzzle 1  as I have used positive number. There is number six (6) in the resultset why? Msg 232, Level 16, State 2, Line 2 Arithmetic overflow error for type real, value = 90000000000000006000000000000000000000000.000000. How to participate To win the Gift Card USD 25 you will have to answer both of the question on my Facebook page. If you are on twitter – you can increase the chance of winning by tweeting your participation. This contest is open for any one from any country. The winner will be selected Randomly. Winner will be announced on July 7, 2011. Related Post: SQLAuthority News – Monthly list of Puzzles and Solutions on SQLAuthority.com Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, SQL, SQL Authority, SQL Puzzle, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, SQLServer, T SQL, Technology

  Read the article

• How to Install a Wireless Card in Linux Using Windows Drivers

  - by Justin Garrison

  Linux has come a long way with hardware support, but if you have a wireless card that still does not have native Linux drivers you might be able to get the card working with a Windows driver and ndiswrapper. Using a Windows driver inside of Linux may also give you faster transfer rates or better encryption support depending on your wireless card. If your wireless card is working, it is not recommended to install the Windows driver just for fun because it could cause a conflict with the native Linux driver Latest Features How-To Geek ETC How To Make Hundreds of Complex Photo Edits in Seconds With Photoshop Actions How to Enable User-Specific Wireless Networks in Windows 7 How to Use Google Chrome as Your Default PDF Reader (the Easy Way) How To Remove People and Objects From Photographs In Photoshop Ask How-To Geek: How Can I Monitor My Bandwidth Usage? Internet Explorer 9 RC Now Available: Here’s the Most Interesting New Stuff Smart Taskbar Is a Thumb Friendly Android Task Launcher Comix is an Awesome Comics Archive Viewer for Linux Get the MakeUseOf eBook Guide to Speeding Up Windows for Free Need Tech Support? Call the Star Wars Help Desk! [Video Classic] Reclaim Vertical UI Space by Adding a Toolbar to the Left or Right Side of Firefox Androidify Turns You into an Android-style Avatar

  Read the article

• Can't use nvidia card/driver on optimus notebook

  - by Mr. Pixel

  I installed (once again) the latest official nvidia driver for my GT540m on Ubuntu 11.10. Even though everything seems OK with my xorg.conf file (I've manually added BusID "PCI:1:0:0", since lspci shows 01:00.0 for my GPU). The problem is, when I use the xorg.conf file generated by Xorg -configure, Xorg automatically loads the Intel GPU. So I removed everything that was not related to my nvidia card, basically leaving my xorg.conf with one screen and one device (with the nvidia driver and the above-mentioned BusID), and Xorg fails to start. The log says something like "Devices on GT540m [newline] none" And a few lines later, something like "NVIDIA(0) found a screen, but have no device for it". When I don't set the BusID, it doesn't seem to detect my card either. Thank you for any suggestion. PS: If possible, I'd like to avoid bumblebee or any similar "hybrid graphics" solution, last time I tried I ended up reinstalling Ubuntu. Edit: Allow me to clarify the problem. I have a notebook with a GT540m graphics card, and an integrated intel gpu. I want to use the graphics card with full hardware acceleration and its official driver, as I do under windows.

  Read the article

• Best approach to depth streaming via existing codec

  - by Kevin

  I'm working on a development system (and game) intended for games set mostly in static third-person views. We produce our scenery by CG and photographic techniques. Our background art is rendered off-line by a production-grade renderer. To allow the runtime imagery to properly interact with the background art, I wrote a program to convert from depth output by Mental Ray into a texture, and a pixel shader to draw a quad such that the Z data comes from the texture. This technique is working out very well, but now we've decided that some of the camera angle changes between scenes should be animated. The animation itself is straightforward to produce from our CG models. We intend to encode it to some HD video codec such as H.264. The problem is that in order to maintain our runtime imagery on the screen, the depth buffer will need to be loaded for each video frame. Due to the bandwidth, the video's depth data will need to be compressed efficiently. I've looked into methods for performing temporal compression of depth info and found an interesting research paper here: http://web4.cs.ucl.ac.uk/staff/j.kautz/publications/depth-streaming.pdf The method establishes a mapping between 16-bit depth values and YCbCr values. The mapping is tuned to the properties of existing video codecs in order to maximize precision of the decoded depths after the YCbCr has undergone video compression. It allows an existing, unmodified video codec to be used on the backend. I'm looking at how to pull this off with the least possible work. (This design change was unplanned.) Our game engine itself is native C++, presently for Win32 and DirectX, although we've worked hard to keep platform dependence segregated because we intend other ports. We don't have motion video facilities in the engine yet but will ultimately need that anyway for cinematics. I was planning on using some off-the-shelf motion video solution we can plug into our engine, and haven't chosen one yet. This new added requirement makes selecting one harder since, among other things, we'll now need to bypass colourspace conversion on one of the streams, and also will need to be playing two streams simultaneously in lockstep, on top of in some cases audio on one of them (for the cinematics). I'm also wondering if it's possible (or even useful) to do the conversion from YCbCr to depth in a pixel shader, or if it's better to just do it in CPU and separately load the resulting depth values into a locked tex. The conversion unfortunately does involve branching logic per-pixel. (There are more naive mappings that don't need branching, but they produce inferior results.) It could be reduced to a table lookup but the table would be 32MB. Programming is second-nature to me but I'm not that experienced with pix shaders and have zero knowledge of off-the-shelf video solutions. I'd therefore be interested in advice from others who may have dealt more with depth streaming, pixel shaders, and/or off-the-shelf codecs, regarding how feasible the proposed application is and what off-the-shelf video systems out there would best get along with this usage case.

  Read the article

• Effect of using dedicated NVidia card instead of Intel HD4000

  - by Sman789

  Short version: Can someone please advise me of the effect of adding a dedicated NVIDIA GeForce GT 630M card to an Ubuntu laptop in terms of power consumption and performance gains/losses when doing general productivity tasks and booting up. Also, how good are the closed source, open source, and Bumblebee drivers for these newer cards compared to support for the Intel HD4000? Long version/Background, if any info here is helpful: I'm thinking of ordering a laptop from PC Specialist (a UK company who actually sell machines without Windows pre-installed) with the following specifications: Genesis IV: 15.6" AUO Matte 95% Gamut LED Widescreen (1920x1080) Intel® Core™i5 Dual Core Mobile Processor i5-3210M (2.50GHz) 3MB 4GB SAMSUNG 1600MHz SODIMM DDR3 MEMORY (1 x 4GB) 120GB INTEL® 520 SERIES SSD, SATA 6 Gb/s (upto 550MB/sR | 520MB/sW) Intel 2 Channel High Definition Audio + MIC/Headphone Jack GIGABIT LAN & WIRELESS INTEL® N135 802.11N (150Mbps) + BLUETOOTH Now, as I want this laptop mainly for work and not for games, I would be more than content with the HD4000 integrated chip which comes with the processor. However, for compatibility reasons, I am not able to get the specs I want unless I choose a NVIDIA GeForce GT 630M 1GB graphics card, which I don't have a great deal of use for. I'm willing to buy it, however, as it's still cheaper than any other laptop with the specs I want. However, I know that Linux power management isn't fantastic with open-source graphics drivers, and I don't much about Bumblebee. Basically, whilst I'm happy to 'tolerate' the card being there, I don't want to experience any negative effects on the rest of my system (battery, performance etc) and if there are likely to be any, I might reconsider my purchase. So if anyone can advise me on the effects, I would be very grateful, since I doubt I can just turn the card off. Thankyou for any assistance :)

  Read the article

• Online video tutorials for HTML 5

  - by Albers

  Here are some of the best introductory HTML5 videos I have found online/for free. Mix 2011: HTML5 for Skeptics - Scott Stansfield channel9.msdn.com/Events/MIX/MIX11/EXT21 Filling the HTML5 Gaps with Polyfills and Shims - Ray Bango channel9.msdn.com/Events/MIX/MIX11/HTM04 50 Performance Tricks to Make Your HTML5 Web Sites Faster - Jason Weber channel9.msdn.com/Events/MIX/MIX11/HTM01 TechEd 2011 HTML5 and CSS3 Techniques You Can Use Today - Todd Anglin channel9.msdn.com/Events/TechEd/NorthAmerica/2011/DEV334 Google IO HTML5 Showcase for Web Developers: The Wow and the How www.youtube.com/watch?v=WlwY6_W4VG8 css-tricks localStorage for Forms - Chris Coyier css-tricks.com/video-screencasts/96-localstorage-for-forms/ Best Practices with Dynamic Content - Chris Coyier This one talks about Hash Tags - take a look at the History API too css-tricks.com/video-screencasts/85-best-practices-dynamic-content/ localStorage for Forms - Chris Coyier css-tricks.com/video-screencasts/96-localstorage-for-forms/ Overview of HTML5 Forms Types, Attributes, and Elements - Chris Coyier css-tricks.com/video-screencasts/99-overview-of-html5-forms-types-attributes-and-elements/ Bruce Lawson - HTML5: Who, What, When, Why www.ubelly.com/2011/10/bruce-lawson-html5-who-what-when-why/ Bruce Lawson is an evangelist for Opera, and in this video he provides an overview including the history & philosophy of HTML5.

  Read the article

• How can I dynamically load the correct sprite from a sprite sheet?

  - by Leonard Challis

  I am making a simple card game in unity. The game is based on a standard 52-card pack, with identical backs for unique faces. In my particular game different cards are worth different values and have various special abilities. The game will have 52 cards on the table (on the draw position or in the face-down deck or in someone's hand) at all times, so this number won't change. I thought that making a Card prefab and instantiating 52 of these manually would be a bad idea. Even doing it in code, I thought, would be a bit OTT, and that I should just instantiate visual cards when they are face-up to the player. I have a sprite sheet of the 52 cards and the back, which is imported as a Sprite in multiple mode, sliced in to a grid containing all the cards needed to play the game. The problem I now face is that, through my GameController script I want to generate a shuffled pack of cards, deal some to each player and then show those cards to a player. However, I am not sure of the best way, or even if it's possible, to do this dynamically with the sprite sheets as they are. For instance if I have the following: private CardRank rank; private CardSuite suite; private void Start() { this.rank = CardRank.Ace; this.suite = CardSuite.Spades; } This class would be instantiated by the game manager. I would have 52 of these in code. Whenever I have to visually show a card in the scene, I would use a card prefab, which is essentially a game object with a SpriteRenderer on it. I would need to dynamically load the correct sprite for this object from the spritesheet. The sliced sprites from the sprite sheet actually have names in the format AS (Ace of Spades), 7H (Seven of Hearts), etc - though this was a manual thing I did myself of course. I have also tried various alternative solutions, including creating animations, having separate sprites not in a spritesheet and having an array of available sprites in an array with a specific index for each card, but none seem as elegant as trying to load the correct sprite at runtime, as I'm trying to. So, how do I load a specific sprite from a spritesheet at runtime? I'm open to suggestions, even those that make me think differently about how to approach the problem.

  Read the article

• VLC desktop streaming

  - by StackedCrooked

  Edit I stopped using VLC and switched to GMax FLV Encoder. It does a much better job IMO. Original post I am sending my desktop (screen) as an H264 video stream to another machine that saves it to a file using the follwoing command lines: Sender of the stream: vlc -I dummy --sout='#transcode{vcodec=h264,vb=512,scale=0.5} :rtp{mux=ts,dst=192.168.0.1,port=4444}' Receiver of the stream: vlc -I rc rtp://@:4444 --sout='#std{access=file,mux=ps,dst=/home/user/output.mp4}' --ipv4 This works, but there are a few issues: The file is not playable with most players. VLC is able to playback the file but with some weirdness: = it takes about 10 seconds before the playback actually begins. = seeking doesn't work. Can someone point me in the right direction on how to fix these issues? EDIT: I made a little progress. The initial delay in playback is because the player is waiting for a keyframe. By forcing the sender of the stream to create a new key-frame every 4 seconds I could decrease the delay: :screen-fps=10 --sout='#transcode{vcodec=h264,venc=x264{keyint=40},vb=512,scale=0.5} :rtp{mux=ts,dst=192.168.0.1,port=4444}' The seeking problem is not solved however, but I understand it a little better. The RTP stream is saved as a file in its original streaming format, which is normally not playable as a regular video file. VLC manages to play this file, but most other players don't. So I need to convert it to a regular video file. I am currently investigating whether I can do this with ffmpeg if I provide it with an SDP file for the recorded stream. All help is welcome!

  Read the article

• What XSS/CSRF attacks (if any) to be aware of when allowing video embeds?

  - by fireeyedboy

  I've been assigned a project for a website where users will be allowed to upload video's (using a YouTube API) but more importantly (for me) they will also be allowed to submit video embed codes (from numerous video sites, YouTube, Vimeo, etc. etc.). Having no experience with allowing users to embed video: How can I best protect against cross site scripting and/or cross site request forgery attacks specifically for video embedding? What are some of the common pitfalls to watch for? At a minumum I would think to strip all tags except <object> and <embed>. But I have a feeling this will not be enough, will it? If it is of importance, the environment will be: PHP/Zend Framework MySQL Bonuspoints: Is there a common minimum golden rule/code template for video embed codes that are valid across all video sites that I could use to filter the input?

  Read the article

• How to get the src for a video with multiple sources?

  - by Sam Dutton

  I'd like to be able to get the src value that is actually used for a video element like the following: <video> <source src="foo.mp4" type='video/mp4; codecs="avc1.42E01E, mp4a.40.2"'> <source src="foo.webm" type='video/webm; codecs="vp8, vorbis"'> <source src="foo.ogv" type='video/ogg; codecs="theora, vorbis"'> </video> In Firefox (at least), src is defined for the source elements but not for the video element. How can I find which source is used?

  Read the article

• Only 1080p youtube videos work properly

  - by oshirowanen

  I have Ubuntu 12.04 64bit installed/full updated and have noticed that I can only play 1080p youtube videos properly on full screen. All other resolutions, 480, 720, 1440 etc do not go into full screen properly. Please have a look at the attached images. You will notice that only the 1080p video has the video control bar right at the bottom with a respectable text size. All other videos don't have the video control bar right at the bottom on the screen, and the control bar text is too small. I've had this problem for ages, but finally decided to ask about it. 480p: Notice the bottom control bar, it's not at the bottom on the screen and the video has borders on the sides: 720p: Notice the bottom control bar, it's not at the bottom on the screen and the video has borders on the sides and the text is tiny: 1080p: This is the only one that works as expected, i.e. controls right at the bottom, and good font size and no borders on the sides: 1440p: Notice the bottom control bar, it's not at the bottom on the screen and the video has borders on the sides: How do I correct this problem so I can play all different video resolutions at full screen. The flash version I have installed in Chromium is Adobe Flash Player - Version: 11.2 r202 - Shockwave Flash 11.2 r202

  Read the article

• Sharing password-protected videos on social media

  - by PaulJ

  We are developing a site where users will be able to watch and download videos that they've recorded of themselves in a public event. The videos will be password protected, and will be available only to users who have paid for them at the event... ...But on the other hand, we also want users to share those videos on social media, since they will be an attractive publicity for our events. Having people log into our site with their password, download the video and then re-upload it to Youtube/Facebook will be too cumbersome, and I suspect that few users will be willing to do that. So the obvious alternative is to have one of those convenient "share" buttons, but the problem with that approach will be that: The video will be physically hosted (and linked to) in our site. What happens if those videos go viral and our bandwidth cost explodes? The video is password protected. The solution I've thought of for this is: Upload the user's video to our (password-protected site) and to Youtube at the same time, as an unlisted video. The user can access our site with his password and download his video (to watch on his TV or whatever). If the users hits the "share" button, we show him the Youtube link... and we turn the video into a listed one. This seems in line with the ideas in Using YouTube as a CDN, and there didn't seem to be any objections in that question. I'm posting this just to confirm that my idea doesn't violate any Youtube TOS, and also to see if it is a good one or there might be better alternatives.

  Read the article

• Ipad MPMovieplayerController video loads but automatically pauses when played

  - by slayerIQ

  Hello I am trying to get the MPMovieplayerController to work. I load a video everything goes wel i even see the first frame but then it automatically pauses, if i press play it pauses again. In the simulator it works perfectly but on the ipad device it gives the problem. I can even seek through the video and i see the frame i seeked to but nothing plays. This is some output from the console: 2010-06-08 22:16:13.145 app[3089:207] Using two-stage rotation animation. To use the smoother single-stage animation, this application must remove two-stage method implementations. [Switching to thread 12803] warning: Unable to read symbols for "/Developer/Platforms/iPhoneOS.platform/DeviceSupport/3.2 (7B367)/Symbols/System/Library/VideoDecoders/VCH263.videodecoder" (file not found). warning: Unable to read symbols for "/Developer/Platforms/iPhoneOS.platform/DeviceSupport/3.2 (7B367)/Symbols/System/Library/VideoDecoders/H264H2.videodecoder" (file not found). warning: Unable to read symbols for "/Developer/Platforms/iPhoneOS.platform/DeviceSupport/3.2 (7B367)/Symbols/System/Library/VideoDecoders/MP4VH2.videodecoder" (file not found). warning: Unable to read symbols for "/Developer/Platforms/iPhoneOS.platform/DeviceSupport/3.2 (7B367)/Symbols/System/Library/VideoDecoders/JPEGH1.videodecoder" (file not found). 2010-06-08 22:16:15.145 app[3089:207] setting file:///private/var/mobile/Applications/46CE5456-6338-4BBF-A560-DCEFF700ACE0/tmp/MediaCache/ I dont get those warning when using the simulator BTW. Does anyone know how to fix this ?

  Read the article

• Browser Based Streaming Video/Audio (not progressive download)

  - by Josh

  Hello, I am trying to understand conceptually the best way to deliver real streaming audio and video content. I would want it to be consumed with a web browser, utilizing the least amount of proprietary technology. I wouldn't be serving static files and using progressive download, this would be real audio streams being captured live. How does one broadcast a stream that will be reasonably in sync with the source? What kind of protocol is suitable? Edit: In research I've found that there are a few protocols: RTSP, HTTP Streaming, RTMP, and RTP. HTTP streaming is somewhat unsuitable if you are streaming a live performance/communication of some kind because it relies on TCP (as its HTTP based) and you don't lose packets. In a low bandwidth situation, the client can get significantly behind in playback. ref RTMP is a proprietary technology, requiring flash media server. Crap on that. The reason I looked at flash is because they are extremely flexible as far as user experience goes. SoundManager2 provides an excellent javascript interface for playing media with flash. This is what I would look for in a client application. RTSP/RTP is what Microsoft switched to using, deprecating their MMS protocol. RTSP is the control protocol. Its similar to HTTP with a few distinct difference -- server can also talk to the client, and there are additional commands, like PAUSE. Its also a stateful protocol, which is maintained with a session id. RTP is the protocol for delivering the payload (encoded audio or video). There are a few open sourced projects, one of them being supported by apple here. It seems like this might do what I want it to, and it looks like quite a few players support it. It sounds like it would be suitable for a "live" broadcast from this page here. Thanks, Josh

  Read the article

• Trying to write a video file using OpenCV

  - by Ted pottel

  Hi , I’m trying to use OpenCV to write a video file. I have a simple program that loads frames from a video file then accepts to save them At first the cvCreateVideoWrite always return NULL. I got a answer from your group saying it returns separate images and to try to change the file name to test0001.png, this worked. But now the cvWriteFrame function always fails, the code is CString path; path="d:\\mice\\Test_Day26_2.avi"; CvCapture* capture = cvCaptureFromAVI(path); IplImage* img = 0; CvVideoWriter *writer = 0; int isColor = 1; int fps = 25; // or 30 int frameW = 640; // 744 for firewire cameras int frameH = 480; // 480 for firewire cameras writer=cvCreateVideoWriter("d:\\mice\\test0001.png",CV_FOURCC('P','I','M','1'), fps,cvSize(frameW,frameH),isColor); if (writer==0) MessageBox("could not open writter"); int nFrames = 50; for(int i=0;i<nFrames;i++){ if (!cvGrabFrame(capture)) MessageBox("could not grab frame"); img=cvRetrieveFrame(capture); // retrieve the captured frame if (img==0) MessageBox("could not retrive data"); if (!cvWriteFrame(writer,img) ) MessageBox("could not write frame"); } cvReleaseVideoWriter(&writer); Any help would be GREAT - Ted

  Read the article

• PCI-E riser card prevents server from starting at all

  - by user68623

  I need to replace the RAID controller in a server, and the new one is PCI Express while the old one was 64bit PCI. The server has both slots, but the riser card that was installed does not contain the PCI Express part. So I bought a new 4x PCI Express riser card (Delock 89103), but the moment I put it into the slot the server does not start up at all. It does not even get to POST, at most the power LED flashed once but nothing else happens at all. It does not power up the server at all. If I remove the riser card it starts up fine. If I put the riser card into a regular desktop computer it seems to work in general. Is there anything else I have to pay attention to when buying a riser card? My naive assumption would be that any PCI Express riser card should work. Or is my riser card likely to be damaged or out-of-spec and the server is just more picky? How do I get it to work, or how can I at least find a riser card that will work with my server? The server mainboard is a Super Micro PDSMi+.

  Read the article

• dual-boot (win-xp/ubu12.04) graphics card for ubu-desktop/win-xp-games

  - by iole1

  for work I need to get a a new and cheap graphics card for a dual boot machine: windows xp/ubuntu 12.04 LTS. The only requirements I have are: it should work 'flawlessly' in ubuntu (proprietary drivers are ok) it should handle Guild Wars 2 & League of Legends in windows xp (this is really the top priority as we need to be able to play at work :) - yes I have a cool job) I know nothing about graphics cards (and it seems to be a jungle out there). From other questions here and some webstigation I think I'd like to go for a Nvidia card, I've been trying to figure out what models fit the system req's but it seems they use different kind of model numbers so I don't get any wiser. tl;dr: will http://www.geforce.co.uk/hardware/desktop-gpus/geforce-gt-620-oem/specifications run Guild Wars 2 http://gamesystemrequirements.com/games.php?id=938 Or what is the worst card from nVidia that will run GW2 smoothly and work well in Ubuntu 12.04 Thanks!

  Read the article

• Can I share a TV card?

  - by Boris

  My environment: 2 PCs, a desktop and a laptop, both on Oneiric they are connected together by ethernet wire nfs-common is installed and configured: the desktop is the server a TV tuner card is installed on the desktop, I can watch TV with the software Me-TV It works fine, TV on desktop, and my network too: I share folders thanks to NFS. But I would like more: How can I share my TV tuner card from the desktop and be able to watch TV on the laptop too? If possible I would like a solution that allows me to keep using the software Me-TV, on both PCs. I bet that there is a solution to create a fake TV card on the 2nd PC with xNBD. I'm trying xnbd-server --target /dev/dvb/adapter0/demux0 but I cant make it work. Trying to understand some examples of xNBD command lines, it seems to be meant only for sharing disk player. If someone as ever used xNBD, he's welcome.

  Read the article

• Google adwords API - credit card safety question

  - by anon

  Hi, Google is asking me to fax credit card xerox in order to activate adwords API in MCC. This really sucks imo... they could have had prepaid option. In any case, my questions: 1) Are there alternatives to this - is there a 3rd party provider who will give me this service without me sending them the credit card info? 2) How secure is it to send my credit card fax via some online fax service? 3) Do you think they will reject the application if I hide my CVV number in the fax? Any other thoughts appreciated :) thanks

  Read the article

< Previous Page | 53 54 55 56 57 58 59 60 61 62 63 64  | Next Page >