Search Results

Search found 14377 results on 576 pages for 'video card'.

Page 58/576 | < Previous Page | 54 55 56 57 58 59 60 61 62 63 64 65  | Next Page >

• Record Screen Activity with CamStudio

  - by Asian Angel

  Sometimes a visual demonstration works much better than a list of instructions. If you need to make a demo video for family and/or friends then you might want to have a look at CamStudio. Using CamStudio To get properly set up you will need to install two different files (the main program followed by the codec). Once that is done you are ready to get started. When you start the program you will see a surprisingly small window. Notice the highlighted Record to text…it serves as a visual indicator for the video type selected for recording. Before you start creating a video it would be a good idea to look through some of the settings. The first one to look at is the region or area that you want to record. Next you will want to look through the video options since these will affect the quality and final size of your video files. The default setting for quality is 70…adjust that to the level that best suits your needs. Note: For our example we maxed out the various video settings for best quality. On our system Microsoft Video 1 was listed as the default compressor but as you can see there were other options available. You can configure the settings for the compressor you want to use if desired. Keep in mind that each compressor will have unique settings of their own, so if you change it, be certain to go back and check. We decided to use the CamStudio Lossless Codec for our example (it gave the best results while trying the software). Going back to the main window you can toggle back and forth between .avi and .swf output using the last button. Once you are satisfied with the settings click on the red record button to start. If you need to pause while recording or stop recording click on the system tray icon and select the appropriate command. When you are finished recording, you will be presented with the save file window. Browse for the desired save location and name your new file. Once you have saved the file the movie player window will automatically open so that you view your new video. Our sample video shown here is at 50% of original size so may look slightly “gritty”. The detail was much better at 100%. If you decide to record and save as .swf the process will be identical to recording in .avi format until the movie player window opens. At that time the conversion process from .avi to .swf will begin. When complete you will have a new flash video and html file that goes with it. Depending on which browser you have set as default, you may run into a small problem when the preview for your new .swf file tries to open. There is a small bug in the generated html file. You can use this work-around or… Just open the .swf file directly in your favorite browser. Conclusion CamStudio may not produce the highest quality videos, but it’s free and does a very nice job nonetheless. If you are working on a tight budget or only need to make an occasional video then CamStudio is a very sensible choice. Links Download CamStudio Stable Version & CamStudio Codec *Download links are approximately half-way down the page. Download CamStudio Stable Version & CamStudio Codec at SourceForge *Beta version also available here. Similar Articles Productive Geek Tips Get the Classic Style Network Activity Indicator Back in Windows 7How To Copy a DVD with VLC 1.0ALLCapture 3.0 [Review]Listen and Record Over 12,000 Online Radio Stations with RadioSureGeek Reviews: Play And Record Internet Radio With Screamer Radio TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 TimeToMeet is a Simple Online Meeting Planning Tool Easily Create More Bookmark Toolbars in Firefox Filevo is a Cool File Hosting & Sharing Site Get a free copy of WinUtilities Pro 2010 World Cup Schedule Boot Snooze – Reboot and then Standby or Hibernate

  Read the article

• Black screen in installation when Nvidia graphic card plugged

  - by jopasso1

  When I try to install any recent version of Ubuntu, the screen shows some green and purple mess (like analog TVs when thers no signal). Then, a black screen. I guess it keeps booting in live/install mode. But I can't see it. I tried installing from CD and USB, I tryed changing some BIOS settings... I installed older versions, like 8.04, and it worked, but after updating the system, it crashes again. That's why I discovered that upgrading Nvidia drivers, made system show a black screen again. After that, I unplugged the Nvidia card and installed 12.04 with onboard card. It worked perfectly. Then, I plugged Nvidia again and system booted, but only showing that black screen again. I keep working with onboard card, so far... The nVidia is a GeForce 8500GT.

  Read the article

• That pestky Intel Centrino wireless N + WiMAX 6150 wireless card

  - by newb26

  I'm new to linix and just got Ubuntu up and running on my ASUS laptop last night. Aside from the wireless everything seems to be working. The card is able to recognize networks but cannot make a full connection. After I enter my password it will try to connect before asking for the password again after a few minutes. I know the issue isn't the password because I checked that I had the right one. I've done some poking around trying to find a way to get it work. Linix recognizes the card as well. I found a link to some drivers in a question someone had about a WiMAX 6250 card and am curious if anyone knows if they would also work for the 6150 I have in my machine: https://github.com/ago/wimax-tools If not what can I do?

  Read the article

• install Cirrus Logic cs46xx (audio card) drivers

  - by Aikanáro

  I have two sounds cards, one is the on-board (it's VIA) the other is Cirrus Logic cs46xx. This is what lspci shows me: 04:04.0 Multimedia audio controller: Cirrus Logic CS 4614/22/24/30 [CrystalClear SoundFusion Audio Accelerator] (rev 01) It only show the cirrus logic, cause I disable the VIA card through BIOS. This page: http://es.driverscollection.com/?file_id=13152 gives me instructions to install it, but I can follow them because the folders indicates in the page do not matches with the ones that I see in my system. The alsa page: http://alsa-project.org/main/index.php/Matrix:Module-cs46xx, also give me instructions, but I don't understand it. For example, they say: type in a terminal: ./configure but don't say in what directory. I think that isn't instructions for begginers... Right now I can't heard anything. I decide to disable the VIA audio card, cause I've read they don't get along with linux, although i use the integrate VIA video card. I have ubuntu 11.10

  Read the article

• No sound after installing a new Graphics Card

  - by Dan

  I've just upgraded my graphics card to an Asus Geforce 210 and now my system has no sound. I've ran Update Manager and the Additional Drivers utility which installed the latest Nvida driver. The graphics card is connected to my TV via a DVI-to-HDMI (DVI at the PC end) cable for the visual connection, and an audio jack from my onboard soundcard for my audio connection. Any ideas on how to resolve this? I ran this command ubuntu-bug audio And it outputted this: You seem to have configured PulseAudio to use the "pci-0000_05_00.1" card, while you want output from "NFORCE - NVidia CK804". I've tired a bit of messing about with the audio settings but can't get anything to work.

  Read the article

• OpenGL behaviour depending on the graphics card?

  - by Dan

  This is something that never happened to me before. I have an OpenGL code that uses GLSL shaders to texture a 3D model. The code involves a lot of GPU texture processing, blending, etc... I wanted to check how the performance of my code improves using a faster graphics card (both new and old are NVIDIA, using always the NVIDIA development drivers). But now I have found that once I run the code using the new graphics card, it behaves completely different (the final render looks wrong), probably because some blending effect is not performed correctly. I haven't really look into what has changed, but I am guessing that some OpenGL states are, by default, set different. Is this possible? Have you ever found different OpenGL/GLSL behaviour using different graphics cards? Any "fast" solution? (So far I've thought of plugging back the old one, push all OpenGL default states, and compare with the ones I initially get using the new card..)

  Read the article

• Handling & processing credit card payments

  - by Bob Jansen

  I'm working on program that charges customers on a pay as you go per month modal. This means that instead of the customers paying their invoices at the start of the month, they will have to pay at the end of the month. In order to secure the payments I want my customers credit card information stored so that they can be charged automatically at the end of the month. I do not have the resources, time, or risk to handle and store my customers credit card information on my servers and am looking for a third party solution. I'm a tad overwhelmed by all the different options and services that are out there and was wondering if anyone with experience have any recommendations and tips. I'm having difficulty finding services that allow me to to store my customers credit card information and charge them automatically. Most of them seem to offer an invoice styled approach.

  Read the article

• Cannot connect to Internet on 11.04 using BSNL EVDO Prithvi Card

  - by Joy

  I cannot connect to Internet using BSNL EVDO Prithvi data card. Went through some websites that offered help, installed wvdial package and tried again, but was unsuccessful. I have Read that, Ubuntu 11.04 automatically detects Data Card, You only need to configure "Network Manager" and it will work, I did exactly that, but the result is same. The OS detects the data card, and the presence of network , but it cannot login. I have read in some forums that Ubuntu 11.04 does not have support for BSNL EVDO Prithvi, is it true? I re-checked the "User ID" and "Password". Its working on Windows. Please help me fix this.

  Read the article

• 525 m nvidia grapic card is not work in Linux

  - by mayank khandelwal

  i have dell dell inspiron 15r and company give the windows 7 64 bit os. i have 1GB 525m nvidia graphic card which work in windows very well but when i install the ubuntu 10.10 then graphic card is not work. ubuntu 10.10 give that message that i have nvidia graphic card which not active you want to active. when i say ok then its download driver from the net and then install it when restart computer then graphic terminal is not working other terminal is work well. i have not idea why that happen plz help me ?

  Read the article

• new hard drive on Dell Adaptec 2610SA 6 port SATA RAID PCI card

  - by Ragnarok85

  I have a Dell Adaptec 2610SA 6 port SATA RAID PCI card with 3 hard drives on it and everything works fine. I plugged another hard drive to it and the system (Ubuntu 12.04, 64 bit) seems not to recognize it. Strange thing is that, as happened in the past, if I re-install the system, it recognizes the new hardware plugged to RAID card. Of course I don't want to re-install ubuntu each time I plug a new hard drive on my RAID card. Any idea? Thank you in advance

  Read the article

• Boot Ubuntu on smartphone SD card?

  - by berad

  Now here's what I want: Ubuntu on the SD card that lives in my phone. I like using Ubuntu portably and my phone as a flash drive, but I haven't been able to make these work together yet. I've tried booting off my Huawei U8800 (Android 2.2) and Nokia E66 with a micro-SD card (with 11.10, boots OK in a card-reader) on an eeepc 901 without luck. The Huawei doesn't show up in the BIOS boot menu. BIOS sees the Nokia but halts at "Boot error". I guess this is related to the phone's flash drive emulation and how it handles bootsectors, but I don't know enough about how that works to go any further. Has anyone succeeded in this?

  Read the article

• No useful DVB-T card found

  - by Edu

  I am using Ubuntu 12.04 3.2.0-26 kernel and I just added a DVB-T card. I did install the media_build as in (http://linuxtv.org/wiki/index.php/How_to_Obtain,_Build_and_Install_V4L-DVB_Device_Drivers) After that the Restricted Drivers appeared on the screen and I installed the Firmware for DVB Cards. lsusb shows Bus 002 Device 005: ID 048d:9005 Integrated Technology Express, Inc. which is my card. lsmod shows these things regarding dvb dvb_usb_it913x 22173 0 dvb_usb 32369 1 dvb_usb_it913x dvb_core 110010 1 dvb_usb rc_core 26343 2 dvb_usb_it913x,dvb_usb Nevertheless there is no /dev/dvb on my linux and Kaffeine does not find the TV turner. Can anybody help me installing my TV Card? Thanks

  Read the article

• Ubuntu 12.04 with Intel 82845g/gl graphics card

  - by user209461

  I have an old machine with the intel card in the title installed. I'd really need to install Ubuntu 12.04 on it, but that's not just possible since the intel drivers don't work properly. So no video acceleration, no window decorations, and lots of other issues. I do know it's an obsolete unsupported card (see Which version of Ubuntu will work out of the box on Intel 82845G Board?) but I think I read somewhere that there had been progress as of late with the latest intel drivers. My question is: is there anything I can currently do to make this card work or should I just give up on the idea and turn to lighter DE like LXDE or XFCE? Thanks

  Read the article

• Acer sound card

  - by Rob Brugh

  Hi I have an acer aspire on a recent upgrade somehow it loaded dummy output into upper memory so every time I boot up I have to manually load my sound card. using sudo /sbin/alsa reload then alsamixer and f6 to change to my proper sound card. How do I go about making that my default sound card loading on boot every time. sometimes the message comes up cannot find alsamixer, if that happens I have to run the following command sudo /sbin/alsa force-reload and then alsamixer. That works only on current session I would like to get that so it boots without coming up with dummy output. anyone out there know what the command is to make that load to boot section?

  Read the article

• Kubuntu permanent install won't attach sound card

  - by rob

  I installed Kubuntu Live version and sound card visible in the volume/mixer panel. After installing the permanent version I have a dummy output where my sound card should be, therefore no sound. I re-installed the live version three times and then to permanent but the same problem each time. There is a very brief error on boot up to the permanent version that says: error. cannot attach card default. no such file or directory. I'm running Kubuntu 12.04 on a Mac G4 PPC with no other OS. I'm very new to Linux. I am able to follow instructions to help resolve this, but I'm not familiar with the OS.

  Read the article

• Drives will not show up on PCI RAID card in Ubuntu 12.04 LTS

  - by Mechh69

  Computer specs Intel E8200 Dual Core MSI G45M MB Ultra U12-40739 PCI Expansion Card - 2 SATA Internal Ports, 1.5Gbps, RAID 0, 1, JBOD 6 GB DDR2 Q1. I installed Ubuntu 12.04 LTS and Amahi, for using Grey Hole, last night. The two disc on the raid card do not show up under Ubuntu 12.04LTS but they do show up under grey hole so I know the drives and the raid card are working and there. I need to access them in Ubuntu to format them and place folders on them but I can not see them or figure out how to access them. Q2. Only 4 of the six drives connected to the MB are showing in Ubuntu, but they show as active in grey hole. I also need to access these drives in Ubuntu as this is my storage server. I am new to LINUX so any help you can provide with simple directions will be greatly appreciated . Thank you Mechh69

  Read the article

• Transferring files from computer to Android Simulator SD Card ?

  - by mgpyone

  I've tried Android Simulator for Mac and can use it well. also I've set 100 MB for SD Storage for that simulator. however, I don't found a way of transferring files from my Mac to that Android Simulator SD Storage. Current solution is I've to send files to my mail and have to access via Simulator ,then download to it . well, but it's not available fro all formats . something like image file(.img) are not allowed to download to the simulator. I've seek any folder of SD Card for Simulator within Android Folder I've extracted. I've found nothing. I want to transfer files from my HD to Android simulator SD card storage. Thus, is there any effective solution that support my idea ? I'm on Mac OS X 10.6.2.

  Read the article

• What are the "software" requirements for a 3D video?

  - by Diogo Rocha

  Today, looking for the technical explanations about MPEG4, I saw that it can implement the VRML rendering for a 3D video. This makes me wondering about the "software" requirements to make or to see a 3D video. I mean, assuming that I have all the "hardware" requirements(3D monitor, VGA, 3D-camera, etc), what should I need to make and see 3D videos looking over the "software" side? Must I need to make it on MPEG4 instead MPEG1 or MPEG2 because of the VRML support? May I need a specifc 3D codec to open and see 3D videos?? Until today, I believed that a 3D video was just a regular/ordinary video composed of 2 "overlapping layers". PS: This is the first time I'm researching about technical explanations/references about MPEG standards and 3D videos, any help or basic explanations will help.

  Read the article

• How to embed video in powerpoint with relative paths?

  - by Gabe

  Does anyone know how to embed a video in a powerpoint presentation in such a way that it can be moved to another computer? Possible solutions I'm considering: Actually embed the video file into the powerpoint file. This would be ideal, but I don't know how to do this. Insert a reference to the video into the presentation. I need this to be a relative path, though, not an absolute path. EDIT: I forgot to mention I'm using powerpoint 2003

  Read the article

• How to edit screen grabbed video on Windows XP?

  - by tangens

  Problem I've used CamStudio to record a presentation (fullscreen, 1280x1024, 45 min, no audio) to a small number of AVI files (10 files with about 800 MB total). Now I want to remove the initial and trailer sequences where you see start and stop of CamStudio. I'd like to remove some pauses during the video, too. Question Could you recommend some programs for Windows XP that I can use for this task? The result should be a (small - at least not bigger than the original) video format that I can play back. I've no need to create a DVD etc. Already tried I already tried MAGIX Video Deluxe 16 (Trial Version), but it takes about 2 hours to just export 10 minutes of the video and produces about 2 GB of data for this.

  Read the article

• Can you tell by the network traffic whether a video was watched or downloaded from YouTube?

  - by humanityANDpeace

  My question is about quite popular YouTube downloaders like youtube-dl (a command line program) or VideoDownloadHelper (a Firefox-browser extension). Comparing two cases: Watching a video on YouTube Download the video using a downloader (to be specific let's assume youtube-dl) Is it possible to tell – for instance by inspecting the network traffic – that the video was downloaded and not "only watched" on YouTube? Maybe one could compare network traffic using programmes like Wireshark? I cannot do that myself, but maybe this will help somebody to answer the question.

  Read the article

• How do I embed video in PowerPoint with relative paths?

  - by Gabe

  I'm using PowerPoint 2003. Does anyone know how to embed a video in a PowerPoint presentation in such a way that it can be moved to another computer? Possible solutions I'm considering: Actually embed the video file into the powerpoint file. This would be ideal, but I don't know how to do this. Insert a reference to the video into the presentation. I need this to be a relative path, though, not an absolute path.

  Read the article

• How to reset video/display drivers in Vista without restarting OS?

  - by jdk

  Currently I have to reboot my system if an external monitor is hooked up for it to be correctly detected and used. I think it would be faster to restart/reset the video or display drivers instead. How do I do this under Vista? I seem to remember from an old laptop using a Windows command-line command that would restart the wireless networking card device when it crashed. Is there something like that for video drivers? Background/Reason Because people rightfully ask why? - This is part of a larger problem which I'm waiting for resolution on from the manufacturer. In the meantime I'm looking for the above quick fix. Actually my video card often crashes my laptop when attaching an external monitor and trying to detect or use it. No solution from vendor yet and latest drivers do the same irksome behaviour. Windows says: A problem with your video hardware caused Windows to stop working correctly.

  Read the article

• How to reset video/display drivers in Vista without restarting OS?

  - by jdk

  Currently I have to reboot my system if an external monitor is hooked up for it to be correctly detected and used. I think it would be faster to restart/reset the video or display drivers instead. How do I do this under Vista? I seem to remember from an old laptop using a Windows command-line command that would restart the wireless networking card device when it crashed. Is there something like that for video drivers? Background/Reason Because people rightfully ask why? - This is part of a larger problem which I'm waiting for resolution on from the manufacturer. In the meantime I'm looking for the above quick fix. Actually my video card often crashes my laptop when attaching an external monitor and trying to detect or use it. No solution from vendor yet and latest drivers do the same irksome behaviour. Windows says: A problem with your video hardware caused Windows to stop working correctly.

  Read the article

• How to put keyframes at particular time in FLV Video?

  - by Sunny Shah.

  Hi SU Friends, I want to encode an existing FLV video to another FLV Video with resize + croping. Existing video has iFrames at required positions. Now which encoder software is best suited use for this task. Thanks, Sunny.

  Read the article

< Previous Page | 54 55 56 57 58 59 60 61 62 63 64 65  | Next Page >