Search Results

Search found 14694 results on 588 pages for 'zend controller router'.

Page 57/588 | < Previous Page | 53 54 55 56 57 58 59 60 61 62 63 64  | Next Page >

  • How do I require use of the 5 GHz band when connecting to a Wireless N access point?

    - by cqcallaw
    What is says in the topic: there's a Wireless N access point to which I'd like to connect using the 5 GHz band exclusively. How does one accomplish this? Using the directive band=a in the connection configuration file in /etc/NetworkManager/system-connections doesn't seem to affect anything (/var/log/syslog still shows attempts by wpa_supplicant to connect using the 2.4 GHz band), and running iwconfig wlan0 freq 5G per this question results in the following error: Error for wireless request "Set Frequency" (8B04) : SET failed on device wlan0 ; Invalid argument. [Edit] I'm hoping the answer won't depend on the hardware in use, but here's some information about the hardware, just in case: System is an Asus ZenBook Prime UX31A-DB51, running Ubuntu 12.04. lspci output: 00:00.0 Host bridge: Intel Corporation Ivy Bridge DRAM Controller (rev 09) 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) 00:04.0 Signal processing controller: Intel Corporation Device 0153 (rev 09) 00:14.0 USB controller: Intel Corporation Panther Point USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation Panther Point MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 1 (rev c4) 00:1c.1 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 2 (rev c4) 00:1d.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation Panther Point LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation Panther Point 6 port SATA Controller [AHCI mode] (rev 04) 00:1f.3 SMBus: Intel Corporation Panther Point SMBus Controller (rev 04) 00:1f.6 Signal processing controller: Intel Corporation Panther Point Thermal Management Controller (rev 04) 02:00.0 Network controller: Intel Corporation Centrino Advanced-N 6235 (rev 24) The driver for the wireless interface is iwlwifi.

    Read the article

  • My LAN USB NIC is not working in ubuntu 11.10?

    - by Gaurav_Java
    Today i start my system its seems that my LAN port is not working . so i buy one USB to LAN adapter and i plug in ubuntu system its doen't connect automatically .when i check result lsusb its shows me that there is one DM9601 Ethernet adapter is connected when i click on network information in panel its shows me that there is something " wired NEtwork (Broadcom NetLink BCM5784M gigabit Ethernet PCIe) I think want some driver for that .i don't have any idea how it can be used ? here output of sudo lspci -nn *00:00.0 Host bridge [0600]: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub [8086:2a40] (rev 07) 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a42] (rev 07) 00:02.1 Display controller [0380]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a43] (rev 07) 00:1a.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 03) 00:1a.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 03) 00:1a.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 03) 00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 03) 00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 03) 00:1c.1 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 [8086:2942] (rev 03) 00:1c.2 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 [8086:2944] (rev 03) 00:1c.4 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 [8086:2948] (rev 03) 00:1d.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 03) 00:1d.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 03) 00:1d.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 03) 00:1d.3 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 03) 00:1d.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 03) 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 93) 00:1f.0 ISA bridge [0601]: Intel Corporation ICH9M LPC Interface Controller [8086:2919] (rev 03) 00:1f.2 SATA controller [0106]: Intel Corporation ICH9M/M-E SATA AHCI Controller [8086:2929] (rev 03) 00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 03) 02:00.0 Ethernet controller [0200]: Broadcom Corporation NetLink BCM5784M Gigabit Ethernet PCIe [14e4:1698] (rev 10) 04:00.0 Network controller [0280]: Intel Corporation WiFi Link 5100 [8086:4232]* sudo lshw -class network *-network description: Ethernet interface product: NetLink BCM5784M Gigabit Ethernet PCIe vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: 10 serial: 00:1f:16:9a:56:98 capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.119 firmware=sb v2.19 latency=0 link=no multicast=yes port=twisted pair resources: irq:47 memory:f4500000-f450ffff *-network DISABLED description: Wireless interface product: WiFi Link 5100 vendor: Intel Corporation physical id: 0 bus info: pci@0000:04:00.0 logical name: wlan0 version: 00 serial: 00:22:fa:09:02:00 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlagn driverversion=3.0.0-17-generic firmware=8.83.5.1 build 33692 latency=0 link=no multicast=yes wireless=IEEE 802.11abgn resources: irq:46 memory:f4600000-f4601fff *-network description: Ethernet interface physical id: 4 logical name: eth1 serial: 00:60:6e:00:f1:7d size: 100Mbit/s capacity: 100Mbit/s capabilities: ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=dm9601 driverversion=22-Aug-2005 duplex=full firmware=Davicom DM9601 USB Ethernet ip=192.168.1.34 link=yes multicast=yes port=MII speed=100Mbit/s I am using Wimax internet connection which i have to connect from browser . at that time my system is not showing that i am connected to any wired connection. but when i connect internet from other system after getting conneted to internet . when i plug again my USB LAN then its shows that you are conneted to wired connetion. here is screenshot for conneting wimax from browser after connecting to internet network connection shows

    Read the article

  • Frequent connection drops when playing online games (StarCraft 2, Battlefield 3) and behind NAT - how to diagnose? [migrated]

    - by Moshev
    I am having some trouble with (I suspect) my wireless router. It's connected to the internet with a regular lan cable and has a static, public IP address. Our two home PCs connect to the router with regular lan cables, plus there's a laptop which connects over wifi. diagram: Internet | | <- isp-supplied cat5 ethernet cable | D-Link D300 ...wifi... laptop / \ / <- cable -> \ PC1 PC2 The PCs and laptop are behind NAT and share the router's public IP. The router is a D-Link D300. PC1 is used for online gaming and I'm experiencing frequent "connection dropped" errors when playing Battlefield 3, StarCraft 2 and the Diablo 3 beta; but not with TeamFortress 2 or the Tribes Ascend beta. The issue goes away when I remove the router and connect PC1 directly to the ISP's cable. I have also tried disconnecting PC2 and the laptop, leaving PC1 as the only machine connected to the router - doesn't help. How can I diagnose what precisely the issue is?

    Read the article

  • Frequent connection drops when playing online games (StarCraft 2, Battlefield 3) and behind NAT - how to diagnose?

    - by Moshev
    I am having some trouble with (I suspect) my wireless router. It's connected to the internet with a regular lan cable and has a static, public IP address. Our two home PCs connect to the router with regular lan cables, plus there's a laptop which connects over wifi. diagram: Internet | | <- isp-supplied cat5 ethernet cable | D-Link D300 ...wifi... laptop / \ / <- cable -> \ PC1 PC2 The PCs and laptop are behind NAT and share the router's public IP. The router is a D-Link D300. PC1 is used for online gaming and I'm experiencing frequent "connection dropped" errors when playing Battlefield 3, StarCraft 2 and the Diablo 3 beta; but not with TeamFortress 2 or the Tribes Ascend beta. The issue goes away when I remove the router and connect PC1 directly to the ISP's cable. I have also tried disconnecting PC2 and the laptop, leaving PC1 as the only machine connected to the router - doesn't help. How can I diagnose what precisely the issue is?

    Read the article

  • Law of Demeter in MVC regarding Controller-View communication

    - by Antonio MG
    The scenario: Having a Controller that controls a view composed of complex subviews. Each one of those subviews is a separated class in a separate file. For example, one of those subviews is called ButtonsView, and has a bunch of buttons. The Controller has to access those buttons. Would accessing those buttons like this: controllerMainView.buttonsView.firstButton.state(); be a violation of the LOD? On one hand, it could be yes because the controller is accessing the inner hierarchy of the view. On the other, a Controller should be aware of what happens inside the view and how is composed. Any thoughts?

    Read the article

  • One controller per page or many pages in one controller?

    - by Rushino
    I just wanted some advice regarding the MVC way of doing things. I am using codeigniter and I was wondering if it's better to have one controller per page for a website or to have one controller for all the pages? Let's say I have a simple website where you can visit the homepage, login, create an account and contact the admin. Would it be better to have these controllers: frontend(index), login, account, contact OR having one controller called frontend or whatever with the actions such login, createAccount, contact? When do you know if its better to use one controller in a situation?

    Read the article

  • Combine WLAN with LAN

    - by fiatux
    I have D-link DSL 2750U wireless router. My PC and notebook are connected to router by Wi-Fi. They can share files or ping each other. I have a network storage unit plugged into router by an ethernet cable. Any of the computers cannot reach that storage unit or ping it. I guess my router isolates LAN network from WLAN network. Is there a way to combine them and get the router treat all devices connected to router in a single network? Thanks.

    Read the article

  • xbox 360 controller problems

    - by DNice
    Hello everyone another new Linux user here.Most things are going well except for the 360 controller.There are so many posts about this it gets a little confusing on which to follow.Anyways someone told me that ubuntu 12.04 comes with a 360 wireless receiver and its just plug and play.When i plug my receiver in and run jstest-gtk 4 generic xbox pad come up in the joystick preferences window.now the controller itself isnt even on,and when it is on it doesnt sync.All four lights just flash.What am I doing incorrectly? Before it is asked yes this controller & receiver both work in Windows 7

    Read the article

  • Invalid controller using custom routes

    - by AlexW
    I've been following the instruction on how to create custom routes from the book Zend Framework - A Beginners Guide I've changed my application.ini file to include this routing information: resources.router.routes.static-content.route = /content/:page resources.router.routes.static-content.defaults.module = default resources.router.routes.static-content.defaults.controller = static-content resources.router.routes.static-content.defaults.view = static-content resources.router.routes.static-content.defaults.action = display Given the above configuration, I have this controller: <?php class Default_StaticContentController extends Zend_Controller_Action { public function init() { /* Initialize action controller here */ } public function displayAction() { // action body $page = $this->getRequest()->getParam('page'); if (file_exists($this->view->getScriptPath(null) . '/' . $this->getRequest()->getControllerName() . '/' . $page . $this->viewSuffix )) { $this->render($page); } else { throw new Zend_Controller_Action_Exception('HLC - Page not found', 404); } } } I have a view named about.phtml in the APPLICATION_PATH/modules/default/views/static-content folder. What ahppens is I get an error saying: An error occurred Page not found Exception information: Message: Invalid controller class ("StaticContentController") Stack trace: #0 /Applications/MAMP/htdocs/zend/library/Zend/Controller/Dispatcher/Standard.php(262): Zend_Controller_Dispatcher_Standard->loadClass('StaticContentCo...') #1 /Applications/MAMP/htdocs/zend/library/Zend/Controller/Front.php(954): Zend_Controller_Dispatcher_Standard->dispatch(Object(Zend_Controller_Request_Http), Object(Zend_Controller_Response_Http)) #2 /Applications/MAMP/htdocs/zend/library/Zend/Application/Bootstrap/Bootstrap.php(97): Zend_Controller_Front->dispatch() #3 /Applications/MAMP/htdocs/zend/library/Zend/Application.php(366): Zend_Application_Bootstrap_Bootstrap->run() #4 /Applications/MAMP/htdocs/HLC/public/index.php(26): Zend_Application->run() #5 {main} Request Parameters: array ( 'page' => 'about', 'module' => 'default', 'controller' => 'static-content', 'view' => 'static-content', 'action' => 'display', ) Note that it is not rendering my customised Zend_Controller_Action_Exception but throwing the global error. I'm using the URL: http://hlc.local:8888/content/about The default index action works ok, just this routing that's not working.

    Read the article

  • Cannot redeclare class error when generating PHPUnit code coverage report

    - by Cobby
    Starting a project with Zend Framework 1.10 and Doctrine 2 (Beta1). I am using namespaces in my own library code. When generating code coverage reports I get a Fatal Error about Redeclaring a class. To provide more info, I've commented out the xdebug_disable() call in my phpunit executable so you can see the function trace (disabled local variables output because there was too much output). Here's my Terminal output: $ phpunit PHPUnit 3.4.12 by Sebastian Bergmann. ........ Time: 4 seconds, Memory: 16.50Mb OK (8 tests, 14 assertions) Generating code coverage report, this may take a moment.PHP Fatal error: Cannot redeclare class Cob\Application\Resource\HelperBroker in /Users/Cobby/Sites/project/trunk/code/library/Cob/Application/Resource/HelperBroker.php on line 93 PHP Stack trace: PHP 1. {main}() /usr/local/zend/bin/phpunit:0 PHP 2. PHPUnit_TextUI_Command::main() /usr/local/zend/bin/phpunit:54 PHP 3. PHPUnit_TextUI_Command-run() /usr/local/zend/share/pear/PHPUnit/TextUI/Command.php:146 PHP 4. PHPUnit_TextUI_TestRunner-doRun() /usr/local/zend/share/pear/PHPUnit/TextUI/Command.php:213 PHP 5. PHPUnit_Util_Report::render() /usr/local/zend/share/pear/PHPUnit/TextUI/TestRunner.php:478 PHP 6. PHPUnit_Framework_TestResult-getCodeCoverageInformation() /usr/local/zend/share/pear/PHPUnit/Util/Report.php:97 PHP 7. PHPUnit_Util_Filter::getFilteredCodeCoverage() /usr/local/zend/share/pear/PHPUnit/Framework/TestResult.php:623 Fatal error: Cannot redeclare class Cob\Application\Resource\HelperBroker in /Users/Cobby/Sites/project/trunk/code/library/Cob/Application/Resource/HelperBroker.php on line 93 Call Stack: 0.0004 322888 1. {main}() /usr/local/zend/bin/phpunit:0 0.0816 4114628 2. PHPUnit_TextUI_Command::main() /usr/local/zend/bin/phpunit:54 0.0817 4114964 3. PHPUnit_TextUI_Command-run() /usr/local/zend/share/pear/PHPUnit/TextUI/Command.php:146 0.1151 5435528 4. PHPUnit_TextUI_TestRunner-doRun() /usr/local/zend/share/pear/PHPUnit/TextUI/Command.php:213 4.2931 16690760 5. PHPUnit_Util_Report::render() /usr/local/zend/share/pear/PHPUnit/TextUI/TestRunner.php:478 4.2931 16691120 6. PHPUnit_Framework_TestResult-getCodeCoverageInformation() /usr/local/zend/share/pear/PHPUnit/Util/Report.php:97 4.2931 16691148 7. PHPUnit_Util_Filter::getFilteredCodeCoverage() /usr/local/zend/share/pear/PHPUnit/Framework/TestResult.php:623 (I have no idea why it shows the error twice...?) And here is my phpunit.xml: <phpunit bootstrap="./code/tests/application/bootstrap.php" colors="true"> <!-- bootstrap.php changes directory to trunk/code/tests, all paths below are relative to this directory. --> <testsuite name="My Promotions"> <directory>./</directory> </testsuite> <filter> <whitelist> <directory suffix=".php">../application</directory> <directory suffix=".php">../library/Cob</directory> <exclude> <!-- By adding the below line I can remove the error --> <file>../library/Cob/Application/Resource/HelperBroker.php</file> <directory suffix=".phtml">../application</directory> <directory suffix=".php">../application/doctrine</directory> <file>../application/Bootstrap.php</file> <directory suffix=".php">../library/Cob/Tools</directory> </exclude> </whitelist> </filter> <logging> <log type="junit" target="../../build/reports/tests/report.xml" /> <log type="coverage-html" target="../../build/reports/coverage" charset="UTF-8" yui="true" highlight="true" lowUpperBound="50" highLowerBound="80" /> </logging> </phpunit> I have added a tag inside the which seams to hide this problem. I do have another application resource but it doesn't seam to have a problem (the other one is a Doctrine 2 resource). I'm not sure why it is specific to this class, my entire library is autoloaded so their isn't any include/require calls anywhere. I guess it should be noted that HelperBroker is the first file in the filesystem stemming out from library/Cob I am on Snow Leopard with the latest/recent versions of all software (Zend Server, Zend Framework, Doctrine 2 Beta1, Phing, PHPUnit, PEAR).

    Read the article

  • What device can create wireless network while connecting to an ethernet router

    - by Nicolo
    Hi, I have access to an ethernet port of a wireless router. I simply connect my laptop to it via an ethernet cable. There are a total of four such ports on the wireless router. Now I want to connect a device (a wireless access point? wireless bridge? wireless switch?) via an ethernet cable to one of the other ethernet ports of the router. I want this device to act as a kind of wireless switch - it should "split" the ethernet connection coming from the router to two or more computers that connect to this device via a wireless. Basically, I have a wireless router with its wireless function switched off. I don't know the password for that router so can't activate the wireless function. Don't know the password of the ISP either. The only thing I can do is to connect via ethernet cable to the wireless router and this does not require a password. Now I want to use that connection and build a wireless upon it. What kind of device do I need? I am not really very well informed about network management and find the descriptions "wireless access point", "wireless bridge", "wireless switch" confusing. I know what an ethernet switch is - what I need is a device which would do the same but by allowing the clients to connect to it via a wireless. What kind of device would do that? Any recommendations about specific products?

    Read the article

  • What should I configure when I put Zend project on windows to Ubuntu Lamp?

    - by meyosef
    Hi, What should I configure when I put Zend project on windows to Ubuntu Lamp? (I asking that beacause my Zend progect not working on Ubuntu, its gives first pages, but after i enter to next page its gives me 404 error(page Not Found), I check if rewrite mod enable with : sudo a2enmod rewrite and get: Module rewrite already enabled ::: I dont have such probelm on Zend Ce and Wamp servers on Windows). Thanks, Yosef

    Read the article

  • Ubuntu Server Wireless connection issue - replaced router but kept ESSID

    - by Stevo
    I have a ubuntu server 12.04 which was connected to my wireless network with no problem I replaced the wireless router but kept the ESSID and password the same. All other devices on network have connected correctly. However the Ubuntu Server will not route correctly. It will connect to the wifi router, and get a dhcp served IP address, however it will not route anything. I cannot ping the router from the server. the contents of /etc/resolve.conf are updated with the information from the router, (the host name has been served) I know there is nothing wrong with the router or the server, or the wireless card etc. I'm assuming there's some cached setting that associates the old router with the ESSID and causing the issue. I've got a lot of other devices connected to the router, so don't want to change the name of the ESSID. How do I fix this? EDIT: outputs (abbreviated as I've got no cut and paste) netstat -rn: Kernel IP Routing table Dest Gate Gen Flags MSS Window irtt Iface 0.0.0.0 192.168.0.1 0.0.0.0. UG 0 0 0 wlan0 192.168.0.0 0.0.0.0. 255.255.255.0 U 0 0 0 wlan0

    Read the article

  • How to load view-Templates from default when not available in module? Zend Framework

    - by Oliver
    Hi my problem with Zend Framework... unfortunately not solved after 3 hours of searching: I have a modular Zend Application, which is working fine if i have my module and error templates in the called module. If i delete error/error.phtml out of views/scripts/ a Fatal Error is showing up that there is no directory. To cut a long story short: How can i define that Zend falls back to default module in this situation? Many thanks in advance.

    Read the article

  • How to stop my wireless adapter from received dhcp from router (windows)

    - by baobeiii
    Hi, I have a windows 7 computer which is connected via vpn to an OpenVpn server which happens to be in another country. I have all internet traffic being routed from my computer through the vpn to the server. However dns queries are not going through the vpn, but are instead going directly to my isp's dns via a route outside of the vpn tunnel. This is happening because my wireless adapter is configured to obtain DNS server address automatically. The router that stands between my computer and the internet happens to have a DCHP server running on it that is assinging my computer with the DNS addresses of the isp. The issue is, i haven't been able to stop my wireless adapter on my computer from receiving the dns settings from the router. I've tried selecting 'use the following dns server addresses' and then just leaving them blank, but ipconfig /all shows me that this hasn't worked and i'm still getting dns form the router. So is there any way to completely stop my windows wireless adapter from receiving these settings from the router? I have the OpenVpn server pushing to my computer's tun adapter the dns that it should be using. I'd rather solve this in a way that doesn't involve disabling the dhcp server on the router or fiddling with the router. The reason is i'm on a laptop and i want my vpn to not leak dns even when i'm out, for example in wireless hotspots. I know if i could just force the wireless adapter to ignore the router's dhcp server then my dns queries would go through the tunnel to the dns address pushed by the OpenVpn server. Sorry, i know thats long winded, if you have any idea's please do tell me. Thanks and merry xmas.

    Read the article

  • How to use integrated support for dyndns clients in 2Wire router ?

    - by Frank
    I logged into the 2Wire web interface, and get to "Broadband Link Advanced Settings" page, how do I use it's integrated support for dyndns clients ? Under "Broadband DNS" it has "Obtain DNS information automatically" selected, under that : Manually configure your DNS information: Primary Server: Secondary Server: Domain Name: what do I need to do ?

    Read the article

  • How to change the default domain controller when querying AD in a different site?

    - by Linefeed
    We have 2 different locations, and at both site we have multiple domain controllers (Win2008). In our application we use Serverless Binding to execute our LDAP queries http://msdn.microsoft.com/en-us/library/ms677945(v=vs.85).aspx. If we look at de DnsHostName of the LDAP://RootDse on site B we always get the default domain controller of site A. Therefor all LDAP queries go much slower. Is there a way to change the default domain controller per site ?

    Read the article

  • Tomato vs X-Wrt Wireless Router Firmware - which is better?

    - by wag2639
    A few years ago, I've switched over from DD-WRT to Tomato and I haven't looked back since. Before I did, I poked around with OpenWRT but found it too confusing or annoying to use (and I'm a CS major and setup and configured Linux servers using SSH). I'm probably not going back to DD-WRT because of all the controversy but I was wondering how X-Wrt is nowadays? From the screenshots, it looks a lot more featured packed than Tomato and that definitely has its appeal. Then again, simplicity has its advantages to. Any thoughts?

    Read the article

  • How to communicate with "Microsoft ACPI-Compliant Embedded Controller" driver?

    - by YT
    I'd like to communicate with an Embedded Controller device in a Notebook through I/O ports 62/66. When running on XP, the communication might collide with "Microsoft ACPI-Compliant Embedded Controller" driver which does the same thing. Therefore, I’d like to know whether (and how) I can communicate with I/O ports 62/66 using this driver. In addition, any informative link about what this driver is doing and how, will be highly appreciated.

    Read the article

  • How to change the default domain controller when querying AD in a different site ?

    - by Linefeed
    We have 2 different locations, and at both site we have multiple domain controllers (Win2008). In our application we use Serverless Binding to execute our LDAP queries http://msdn.microsoft.com/en-us/library/ms677945(v=vs.85).aspx. If we look at de DnsHostName of the LDAP://RootDse on site B we always get the default domain controller of site A. Therefor all LDAP queries go much slower. Is there a way to change the default domain controller per site ?

    Read the article

  • Best usb storage for my router, Asus RT-AC66U?

    - by Jason94
    I have the ASUS RT-AC66U and I want to add a USB storage to it. It has 2x USB, and Im already using one for my printer. So the last one I want to use to attach a USB storage, and I've read some reviews stating the throughput of the USB could be up to 18 mb/s. So in regard of USB storage, should I care about hard disk cache? Simple powered-over-usb seems to have 8 mb cache, other (externally powered) has 16 for instance.

    Read the article

  • Is there a way to alter Zend Studio PhpDoc preferences?

    - by Tower
    Hi, I'm trying out Zend Studio trial and I have a few things on my mind related to PhpDoc. If I have the following code: public function sum($a, $b) { echo $a + $b; } and then I start typing /** in the front of the function and press Enter, Zend Studio automatically makes the following text: /** * [cursor] * @param unknown_type $a * @param unknown_type $b */ However, I want to customize this so that it also includes @return void automatically since there's no return inside the function. Is there a way to do this? And what about things like @access? It's obviously "public". Another thing I want is that when I create a new file and I use the code templates with ${user}, it will use my Windows account, but I want it to use something else - is there a way to specify this "user"?

    Read the article

  • Printing to a printer connected to a wireless router

    - by mspencer
    I have a Netgear WNDR4500 wireless router which allows me to print wirelessly to a printer connected to it via a USB cable. However, the software used to print to it only works for Windows and OS X. I've seen the question Printing to a printer attached to a network USB hub, and tried the instructions it gave using my router's IP address, but when I print a test page it says copying data then says printer is in use. In the printer queue window it says not connected. How can I print to the printer using Ubuntu? Thanks.

    Read the article

  • How to set up router with DSL?

    - by NightwishFan
    I have a Verizon DSL connection. I am new to being the one who has to maintain the net. We have the Verizon modem and plugged into it is a belkin router. I did not alter the configuration on either of the devices. We get a net connection, though I have issues joining any form of online game. Some refuse to connect, others are slow. I have read that perhaps I need to use the modem in "bridge mode" to the wireless router? Would that fix my issues? Or do I just have to open ports or something similar. I really have no clue what could be the problem. Could someone advice me how to get this working with Ubuntu?

    Read the article

< Previous Page | 53 54 55 56 57 58 59 60 61 62 63 64  | Next Page >