Search Results

Search found 27852 results on 1115 pages for 'oracle openworld blog team'.

Page 572/1115 | < Previous Page | 568 569 570 571 572 573 574 575 576 577 578 579  | Next Page >

• RPi and Java Embedded GPIO: Sensor Connections for Java Enabled Interface

  - by hinkmond

  Now we're ready to connect the hardware needed to make a static electricity sensor for the Raspberry Pi and use Java code to access it through a GPIO port. First, very carefully bend the NTE312 (or MPF-102) transistor "gate" pin (see the diagram on the back of the package or refer to the pin diagram on the Web). You can see it in the inset photo on the bottom left corner. I bent the leftmost pin of the NTE312 transistor as I held the flat part toward me. That is going to be your antenna. So, connect one of the jumper wires to the bent pin. I used the dark green jumper wire (looks almost black; coiled at the bottom) in the photo. Then push the other 2 pins of the transistor into your breadboard. Connect one of the pins to Pin # 1 (3.3V) on the GPIO header of your RPi. See the diagram if you need to glance back at it. In the photo, that's the orange jumper wire. And connect the final unconnected transistor pin to Pin # 22 (GPIO25) on the RPi header. That's the blue jumper wire in my photo. For reference, connect the LED anode (long pin on a common anode LED/short pin on a common cathode LED, check your LED pin diagram) to the same breadboard hole that is connecting to Pin # 22 (same row of holes where the blue wire is connected), and connect the other pin of the LED to GROUND (row of holes that connect to the black wire in the photo). Test by blowing up a balloon, rubbing it on your hair (or your co-worker's hair, if you are hair-challenged) to statically charge it, and bringing it near your antenna (green wire in the photo). The LED should light up when it's near and go off when you pull it away. If you need more static charge, find a co-worker with really long hair, or rub the balloon on a piece of silk (which is just as good but not as fun). Next blog post is where we do some Java coding to access this sensor on your RPi. Finally, back to software! Ha! Hinkmond

  Read the article

• Ubuntu 12.10 not updating. Failed to download repository information

  - by vinay

  I recently tried to update by using the update manager, The update stopped and I received the error message: Failed to download repository information W:Failed to fetch http://ppa.launchpad.net/deluge-team/ppa/ubuntu/dists/quantal/main/source/Sources 404 Not Found , W:Failed to fetch http://ppa.launchpad.net/deluge-team/ppa/ubuntu/dists/quantal/main/binary-i386/Packages 404 Not Found , E:Some index files failed to download. They have been ignored, or old ones used instead. What is the problem?

  Read the article

• SQLAuthority News Updated Favorite Scripts and Best ArticlesPage

  I have been writing on this blog for around 4 years now and have contributed with more than 1300 blog posts. Many times, I have been asked regarding what is my most favorite article or which is the most essential script for developers and DBA. This is very difficult to answer as I so much [...]...Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• OWB 11gR2 &ndash; OMB and File Editing

  - by David Allan

  Here we will see how we can use the IDE for editing OMB scripts. The 11gR2 release is based on the common Oracle platform IDE used also by JDeveloper. It comes with a bunch of standard behavior for editing and rendering code. One of the lesser known things is that if you drop a text file into OWB you can edit it. So you can drop your tcl scripts right into OWB and edit in-place, and don’t need another IDE like Eclipse just for this task. Cool, so you have the file here. There may be no line numbers, you can toggle line numbers on by right clicking in the gutter. If we edit the file within the OWB IDE, the save is a little different from normal. OWB doesn’t normally manipulate files so things like ctrl-s to save, saves the OWB objects, but if you edit a file the closing of the file will ask if you want to save it – check it out. Now we enter the realm of ‘he who dares’…. Note the IDE doesn’t know about tcl files out of the box, so you see above there is no syntax highlighting. The code is identified by the extension… .java is java, .html is HTML etc. With OWB, the OMB scripts are tcl, we usually have .tcl extension on these files. One of the things we can do to trick up the syntax highlighting is to simply rename the file to have a .java suffix, then all of a sudden we get syntax highlighting, see the illustration here where side by side we see a the file with a .java extension and a .tcl extension. Not ideal pretending to be .java but gets us a way to having something more useful than notepad. We can then change the syntax highlighting such that we get Eclipse like highlighting within the IDE from the Tools Preferences option; You then get the Eclipse like rendering albeit using a little tweak on the file names… Might be useful if you are doing any kind of heavy duty OMB script development and just want a single IDE. The OMBPlus panel is then at hand for executing and testing it out.

  Read the article

• SQL SERVER Improve Performance by Reducing IO Creating Covered Index

  This blog post is in the response of the T-SQL Tuesday #004: IO by Mike Walsh. The subject of this month is IO. Here is my quick blog post on how Cover Index can Improve Performance by Reducing IO.Let us kick off this post with disclaimers about Index. Index is a very complex subject and [...]...Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• Is there a tool that allows site users to schedule meetings with each other? [closed]

  - by Andrew Min

  I'm the webmaster for a debate team, and we're trying to find a tool that allows us to have multiple team members say when they're available and see who else is available during those timeslots for one-on-one practice rounds. I suppose we could use something like Doodle, but that would involve recreating the Doodle every week. There are many scheduling tools available, but they're usually built so that you can sign up to meet with a specific individual (think a doctor or a professor's office hours), whereas you could be paired with ANY individual.

  Read the article

• JavaOne: Parleys.com, Spring Vs. Java EE and HTML5 tooling

  - by delabassee

  Parleys.com, a 2012 Duke's Choice Award winner, is an E-Learning platform that host content from different sources (conferences, JUGs meetings, etc.). There is a lot of technical content available for online but also offline consumption, including many sessions on Java EE. Parleys has just released, for free, all the Devoxx 2011 sessions (video and slides sync'ed!). From a technical point of view, Parleys.com is interesting as they have switched from Spring to Java EE 6 to avoid being locked in a proprietary framework. During the GlassFish Community BoF, Stephan Janssen (Parleys.com and Devoxx founder) also presented how GlassFish is used to support 2000 concurrent Parleys users over a cluster of 2 GlassFish instances. Talking about Java EE and/or Spring, Harshad Oak has posted an update on the 'Spring Vs. Java EE' panel discussion that took place on Tuesday. As Arun said standards such as Java EE does not necessarily refrain innovation: "JBoss Forge & Arquillian from RedHat are great examples of innovation in the JavaEE community. Standardization is important but innovation does continue even within that framework." Simplicity, productivity along with HTML5 are the driving themes of Java EE 7. In terms of simplicity and productivity, the developer experience can also be improved by the tooling. Every NetBeans release comes with a large set of improvements, the just released NetBeans 7.3 beta is no exception. The goal of ‘NB 7.3’s Project Easel’ is to improve HTML5 development, something that will be handy for Java EE 7 developers. Project Easel can, for example, communicate directly to Chrome's WebKit engine, this feature was shown during Sunday's Technical Keynote at the end of the Java EE section. In this beta release, Chrome and the embedded JavaFX browser are the only supported browsers but the NetBeans team plan to add support, over time, for other WebKit based browsers. NetBans 7.3 beta NetBeans 7.3 screenscasts Today (i.e. Wednesday 3rd) is also the final exhibition day, so make sure to visit the Java EE and the GlassFish pods on the Java DEMOgrounds (Hilton Grand Ballroom, 9:30 am - 5:00 pm). Finally, here are some Java EE and GlassFish related activities worth attending today if you are at JavaOne : Wednesday October 3rd Time Title Location 8:30-9:30am What's New in Servlet 3.1: An Overview Parc 55 Mission 8:30-9:30am Bean Validation 1.1: What's New Under the Hood Parc 55Cyril Magnin II/III 10:00-11:00am JSR 353: Java API for JSON Processing Parc 55 Mission 10:00-12:00pm Tutorial : Integrating Your Service into the GlassFish PaaS Platform Parc 55 Devisidero 11:30-12:30pm What's New in JSF: A Complete Tour of JSF 2.2 Parc 55Cyril Magnin I 11:30-12:30pm Best of Both Worlds: Java Persistence with NoSQL and SQL Parc 55 Mission 1:00-2:00pm Sharding Middleware to Achieve Elasticity and High Availability in the Cloud Parc 55Market Street 1:00-2:00pm Pimp My RESTful Java Applications Parc 55Cyril Magnin I 3:00-4:00pm Migrating Spring to Java EE Parc 55Cyril Magnin II/III 4:30-5:30pm JavaEE.Next(): Java EE 7, 8, and Beyond Parc 55Cyril Magnin II/III 4:30-5:30pm HTML5 WebSocket and Java Parc 55Cyril Magnin I 4:30-5:30pm Easy Middleware for Your Embedded Device Nikko Ballroom II/III

  Read the article

• Transfer ownership of abandoned Google Analytics account

  - by Bobe

  The web team of a new client was fully responsible for the client's Google Analytics account, meaning the client didn't keep records of the account. Now that that web team has gone under we are trying to retrieve the account. Is it possible to request an account to be transferred to another owner, or alternatively have a full-privileged user added to the account? What steps should I take to resolve this issue with Google?

  Read the article

• Cool AJAX-Powered WordPress Plugins

  - by Ravish

  Google PageRank – Allows you to show your Google Page rank on your blog. Alexa Rank – Describe Alexa rank with pride. Codebox – Side scrolling box for displaying code snippets FireStats – This plugin adds a graphical chart of the FireStats statistics plugin on the admin dashboard Ajax Comment Preview – Allows readers to [...] Related posts:WordPress Ajax Enabled Plug-ins 7 Plugins to for your Comments Section 10 Essential WordPress Plugins To Kickstart WP Blog

  Read the article

• MIX10 Talk - Slides and Code

  At MIX10, I presented the Developing with WCF RIA Services Quickly and Effectively talk. For the demos I used a BookClub application - the scenario is a team application for team members to use to share books and browse/search/request shared books. The following are the concepts that the demos and code cover: [Full post continued here...]...Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• How would I go about measuring the impact an article has on the internet?

  - by Jimbo Mombasa

  For an application of mine, I analyze the sentiment of articles, using NLTK, to display sentiment trends. But right now all articles weigh the same amount. This does not show a very accurate picture because some articles have a higher impact on the internet than others. For example, a blog post from some unknown blog should not weigh the same amount as an article from the New York Times. How can I determine their impact?

  Read the article

• Visual Studio Extension: Web Essentials

  - by BizTalk Visionary

  To quote Scott Hanselman…. Visual Studio 2010 is really extensible and that's allowed many folks on the team to try out new features for Web Development without having to rebuild Visual Studio itself. One of those "playground" extensions is called "Web Essentials" by Mads Kristensen. Mads handles HTML5 and CSS3 tools for our team. You might remember Mads from when we released the Web Standards Update a few months back. Get it here: Scott Nanselman blog...

  Read the article

• Commerce, Anyway You Want It

  - by David Dorf

  I believe our industry is finally starting to realize the importance of letting consumers determine how, when, and where to interact with retailers.  Over the last few months I've seen several articles discussing the importance of removing the barriers between existing channels. Paula Rosenblum of RSR first brought the term omni-channel to my attention back in September. She stated, "omni-channel retail isn’t the merging of channels – rather, it’s the use of all possible channels (present and future) to enhance the customer experience in a profitable way." I added to her thoughts in this blog posting in which I said, "For retailers to provide an omni-channel experience, there needs to be one logical representation of products, prices, promotions, and customers across all channels. The only thing that varies is the presentation of the content based on the delivery mechanism (e.g. shelf labels, mobile phone, web site, print, etc.) and often these mechanisms can be combined in various ways." More recently Brian Walker of Gartner suggested we stop using the term multi-channel and begin thinking more about consumer touch-points. "It is time for organizations to leave their channel-oriented ways behind, and enter the era of agile commerce--optimizing their people, processes and technology to serve today's empowered, ever-connected customers across this rapidly evolving set of customer touch points." Now Jason Goldberg, better known as RetailGeek, says we should start breaking down the channel silos by re-casting the VP of E-Commerce as the VP of Digital Marketing, and change his/her focus to driving sales across all channels using digital media. This logic is based on the fact that consumers switch between channels, or touch-points as Brian prefers, as part of their larger buying process. Today's smart consumer leverages the Web, mobile, and stores to provide the best shopping experience, so retailers need to make this easier. Regardless of what we call it, the key take-away is that "multi-channel" is not only an antiquated term but also an idea who's time has passed.  Today, retailers must look at e-commerce, m-commerce, f-commerce, catalogs, and traditional store sales collectively and through the consumers' eyes.  The goal is not to drive sales through each channel but rather to just drive sales -- using whatever method the customer prefers.  There really should be just one cart.

  Read the article

• More Blogginess

  Hello everyone, and welcome to a rare (in this space) blog about blogging. My name is Tim Bray, and I’m the new editor of this Android Developers’ Blog...

  Read the article

• Latency Matters

  - by Frederic P

  A lot of interest in low latencies has been expressed within the financial services segment, most especially in the stock trading applications where every millisecond directly influences the profitability of the trader. These days, much of the trading is executed by software applications which are trained to respond to each other almost instantaneously. In fact, you could say that we are in an arms race where traders are using any and all options to cut down on the delay in executing transactions, even by moving physically closer to the trading venue. The Solaris OS network stack has traditionally been engineered for high throughput, at the expense of higher latencies. Knowledge of tuning parameters to redress the imbalance is critical for applications that are latency sensitive. We are presenting in this blog how to configure further a default Oracle Solaris 10 installation to reduce network latency. There are many parameters in fact that can be altered, but the most effective ones are intr_blank_time and intr_blank_packets. These parameters affect on-board network throughput and latency on Solaris systems. If interrupt blanking is disabled, packets are processed by the driver as soon as they arrive, resulting in higher network throughput and lower latency, but with higher CPU utilization. With interrupt blanking disabled, processor utilization can be as high as 80–90% in some high-load web server environments. If interrupt blanking is enabled, packets are processed when the interrupt is issued. Enabling interrupt blanking can result in reduced processor utilization and network throughput, but higher network latency. Both parameters should be set at the same time. You can set these parameters by using the ndd command as follows: # ndd -set /dev/eri intr_blank_time 0 # ndd -set /dev/eri intr_blank_packets 0 You can add them to the /etc/system file as follows: set eri:intr_blank_time 0 set eri:intr_blank_packets 0 The value of the interrupt blanking parameter is a trade-off between network throughput and processor utilization. If higher processor utilization is acceptable for achieving higher network throughput, then disable interrupt blanking. If lower processor utilization is preferred and higher network latency is the penalty, then enable interrupt blanking. Our experience at ISV Engineering is that under controlled experiments the above settings result in reduction of network latency by at least 50%; on a two-socket 3GHz Sun Fire X4170 M2 running Solaris 10 Update 9, the above settings improved ping-pong latency from 60µs to 25-30µs with the on-board NIC.

  Read the article

• Stuff I learned at Innovate 2011

  - by David Dorf

  After returning from the NRF Innovate 2011 conference, I picked up few nuggets I thought I'd share here.  These thoughts are a bit random, but I hope they're useful nonetheless.Kevin Kelly opened the conference with six verbs that represent the future.  They were Screening, Interacting, Sharing, Accessing, Flowing, and Generating.  It struck me that these are all ways in which we merge the digital and physical worlds.  The internet of things continues to gain momentum.Some buzzwords:  deal economy, subscription commerce, discovery (instead of search), curationThat last one, curation, came up over and over.  Retailers, especially those in fashion, are finding value in helping their customers organize and present their own collections.  Social media has made sharing such collections easy, and mobile lets them take those ideas into the stores.  Mannequins are becoming less relevant.I heard from both HauteLook and Gilt Groupe (flash sale retailers) that a large percentage of their visits come from mobile devices, and most of those are iOS devices.  I find it interesting that even though Android has passed iPhone in units shipped (and will eventually pass iOS as a whole), its still the Apple crowd that leads the way.RadioShack mentioned their Holiday Heroes campaigned was very successful.  They asked their Foursquare users to check-in at a gym, coffee shop, and transportation hub as part of being a hero.  For this feat, customers were awarded a special badge that was worth 20% off at their next store visit. They claim a 3.5x increase in ticket size vs. regular check-in customers, and a 5x increase vs those that don't check-in at all.I also learned of RadioShack's #28 campaign, which is apparently one of the largest Twitter trends ever.  Their partnership with LIVESTRONG has gotten them followers, impressions, and credit for supporting the fight against cancer.The guys at Invodo showed the importance of video to e-commerce.  They gave compelling examples of how video can show customers the value of products better than just words.The highlight of the show was Guy Kawasaki's talk on innovation, which was not only informative but also peppered with humor and personality.  Back in the early days of the internet boom, Guy turned down the CEO position at Yahoo! because the commute was too long.  By his calculation, that was a $2B mistake.There are other good accounts of the conference at the NRF Blog.

  Read the article

• adding tagged / dynamic pages in sitemap

  - by sam

  ive got a blog thats been running for about a year ive made about 200 posts, and there should be about 220 pages to index (additional pages for about / contact ect). When i go to crawl the site i get 1900 pages because of all the pages that are related to tags ive used in my blogs these 70% of these pages only contain one blog post. When submitting my site map to google should i exclude all pages with /tagged/ in the url so ill only be submitting unqiue pages, or should i submit the full site map ?

  Read the article

• Synchronizing ODSEE and OUD

  - by Etienne Remillon

  When it comes to synchronizing between ODSEE and OUD, what should be the best options ? Couple  options are available - Use one of OUD internal capability called Replication Gateway - Use our synchronization tool called Directory Integration Platform part of Oracle Directory Services Plus - Manuel export and import Let's check pro and cons on each method. Replication Gateway is the natural, out of the box solution to perform the task. We created this as a feature of OUD because it works at our replication protocol level. The gateway perform the required adaptation between the ODSEE's replication protocol and OUD's one. The benefits of doing this is that it provide strong consistency between the to type of directories. This fully leverage conflict management implemented in the replication protocols to ensure that changes are applied in a coherent and ordered manner. It does not require specific modification on existing ODSEE production instances such as turning on "retro changelog". Changes are propagated at near speed of replication in both directions. Replication Gateway can also synchronize information that are stored internally in the directory server such as "xxxxx" account locking managed at ODSEE server level and not via the nsyyyy attribute. OUD replication gateway does no require any specific tools or installation specific procedure. It is manged like other OUD component with monitoring and configuration via the standard console. OUD Replication Gateway does not perform adaptation between ODSEE and OUD. Using Directory Integration Protocol as external component to OUD, brings flexibility in remapping and transformations between ODSEE and OUD. There is a price to pay in using DIP to perform the synchronization task. You will have to turn on the retro change log to get access to changes on the ODSEE side (this will impact disk and CPU usage and performances which could be a serious challenge for your existing ODSEE environment (if you have not provisioned additional hardware and instances). You will not benefits of conflict resolution management and this might have to be addressed at application level, which is not always possible to implement. Using export and import seams very simple, but this methodology cannot ensure an highly available deployment with up to date entries on booth sides. This solution can be used if full HA with up-to-date data is not needed (during synchronization time). It often used  if data-cleaning need to take place to avoid polluting a new environment with old un-necessary data.

  Read the article

• 10+ Useful and Free WordPress PDF Plugins

  - by Ravish

  WordPress is one of the most popular platforms for creating blog. Many bloggers often use PDFs to share their blogs on and offline. PDF (Portable Document Format) is a formal open standard for document exchange. PDF file encapsulate the complete description of document including text, graphics, fonts and more. there are many PDF plugins are [...] Related posts:10 useful SEO Plugins For WordPress 10 Essential WordPress Plugins To Kickstart WP Blog 5 Useful WordPress Plugins For Google Adsense

  Read the article

• Less than 50 Lines of Code to Create a Java Palette in NetBeans

  - by Geertjan

  Want to drag and drop Java code snippets into the palette, in the same way as can be done for HTML files? If so, create a new module and add a class with the content below and you're done. You'll be able to select a piece of Java code, drag it into the palette (Ctrl-Shift-8 to open it), where you'll be able to set a name, tooltip, and icons for the snippet, and then you'll be able to drag it out of the palette into any Java files you like. The palette content is persisted across restarts of the IDE. package org.netbeans.modules.javasourcefilepalette; import java.io.IOException; import javax.swing.Action; import org.netbeans.api.editor.mimelookup.MimeRegistration; import org.netbeans.spi.palette.DragAndDropHandler; import org.netbeans.spi.palette.PaletteActions; import org.netbeans.spi.palette.PaletteController; import org.netbeans.spi.palette.PaletteFactory; import org.openide.util.Exceptions; import org.openide.util.Lookup; import org.openide.util.datatransfer.ExTransferable; public class JavaSourceFileLayerPaletteFactory { private static PaletteController palette = null; @MimeRegistration(mimeType = "text/x-java", service = PaletteController.class) public static PaletteController createPalette() { try { if (null == palette) { return PaletteFactory.createPalette( //Folder: "JavaPalette", //Palette Actions: new PaletteActions() { @Override public Action[] getImportActions() {return null;} @Override public Action[] getCustomPaletteActions() {return null;} @Override public Action[] getCustomCategoryActions(Lookup lkp) {return null;} @Override public Action[] getCustomItemActions(Lookup lkp) {return null;} @Override public Action getPreferredAction(Lookup lkp) {return null;} }, //Palette Filter: null, //Drag and Drop Handler: new DragAndDropHandler(true) { @Override public void customize(ExTransferable et, Lookup lkp) {} }); } } catch (IOException ex) { Exceptions.printStackTrace(ex); } return null; } } In my layer file, I have this content: <folder name="JavaPalette"> <folder name="Snippets"/> </folder> That's all. Run the module. Open a Java source file and the palette will automatically open. Drag some code into the palette and a dialog will pop up asking for some details like display name and icons. Then the snippet will be in the palette and you'll be able to drag and drop it anywhere you like. Use the Palette Manager, which is automatically integrated, to add new categories and show/hide palette items. Related blog entry, for which the above is a big simplification: Drag/Drop Snippets into Palette .

  Read the article

• Want to know about SQL events coming in London and around the UK

  - by simonsabin

  The you want to subscribe to the SQLSocial site. http://sqlsocial.com/Subscribe.aspx We’ve just had a great evening with the top brass of the SQL Server team with over 150 people attending and on Monday next week (13th June) we have Michael Rys, Group Program Manager for the SQL Server team doing an evening session on SQL Azure futures as well as SQL Server Denali Semantic Search. To register for that evening go to http://sqlsocial20110613.eventbrite.com/...(read more)

  Read the article

• Portal Server comparisons / TCoO

  - by Scott

  We have a client whom is looking to incorporate Oracle Portal into our next release. I'm newer to this team, but the team is currently working with Apache, so whichever Portal Server we choose will likely incur a bit of a learning curve. Is there any comparison (not marketing) out there which discusses the differences in the servers and/or the total cost of ownership on them? With 5 developers, installing RAD becomes expensive, which I'd assume they'd wish to move onto us with the change to Oracle Portal and WebSphere.

  Read the article

• SmartView 11.1.2.2.103 - Support for MS Office 64 added

  - by THE

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 (thanks to Nancy, who shared this with me)  New for Smart View v11.1.2.2.103, Patch 14362638,   Microsoft Office 64-bit is now supported:  Information for 64-Bit Microsoft Office Installations: In this release, Smart View supports the 64-bit version on Microsoft Office. If you use 64-bit Office, please note the following: Oracle provides separate Smart View installation files for 64-bit and 32-bit Office systems. . smartview-x64.exe is the file for 64-bit Office installations. smartview.exe is the file for 32-bit Office installations. The 64-bit version of Smart View pertains only to the 64-bit version of Microsoft Office and not to the version of the operating system. Customers with 64-bit operating systems and the 32-bit version of Microsoft Office should install the 32-bit version of Smart View. You cannot install the 64-bit version of Smart View from EPM Workspace (13530466). Although Planning Offline is supported for 64-bit operating systems, it is not supported for 64-bit Smart View installations. If you use Planning Offline with Smart View, you must use the 32-bit version of Smart View and the 32-bit version of Microsoft Office. In 64-bit versions of Excel 2010 SP1, the presence of Smart View functions may cause Excel to terminate abruptly and may prevent Copy Data Point and Paste Data Point functions from working. This is a Microsoft issue, and a service request has been filed with Microsoft. Workaround: Until the Microsoft fix, use the 32-bit version of Smart View. (13606492) The Smart View function migration utility is not supported on 64-bit Office. (14342207) /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman","serif";}

  Read the article

• MySQL Connect Keynotes and Presentations Available Online

  - by Bertrand Matthelié

  72 1024x768 Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Following the tremendous success of MySQL Connect, you can now watch some of the keynotes online: The State of the Dolphin – by Oracle Chief Corporate Architect Edward Screven and MySQL Vice President of Engineering Tomas Ulin 72 1024x768 Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Cambria","serif";} MySQL Perspectives – featuring power users of MySQL who share their experiences and perspectives: Jeremy Cole, DBA Team Manager, Twitter Daniel Austin, Chief Architect, PayPal Ash Kanagat, IT Director; and Shivinder Singh, Database Architect, Verizon Wireless You can also access slides from a number of MySQL Connect presentations in the Content Catalog. Missing ones will be added shortly (provided the speakers consented to it). Enjoy!

  Read the article

• Calling home, receiving calls and smartphone data from the US

  - by Rob Farley

  I got asked about calling home from the US, by someone going to the PASS Summit. I found myself thinking “there should be a blog post about this”... The easiest way to phone home is Skype - no question. Use WiFi, and if you’re calling someone who has Skype on their phone at the other end, it’s free. Even if they don’t, it’s still pretty good price-wise. The PASS Summit conference centre has good WiFI, as do the hotels, and plenty of other places (like Starbucks). But if you’re used to having data all the time, particularly when you’re walking from one place to another, then you’ll want a sim card. This also lets you receive calls more easily, not just solving your data problem. You’ll need to make sure your phone isn’t locked to your local network – get that sorted before you leave. It’s no trouble to drop by a T-mobile or AT&T store and getting a prepaid sim. You can’t get one from the airport, but if the PASS Summit is your first stop, there’s a T-mobile store on 6th in Seattle between Pine & Pike, so you can see it from the Sheraton hotel if that’s where you’re staying. AT&T isn’t far away either. But – there’s an extra step that you should be aware of. If you talk to one of these US telcos, you’ll probably (hopefully I’m wrong, but this is how it was for me recently) be told that their prepaid sims don’t work in smartphones. And they’re right – the APN gets detected and stops the data from working. But luckily, Apple (and others) have provided information about how to change the APN, which has been used by a company based in New Zealand to let you get your phone working. Basically, you send your phone browser to http://unlockit.co.nz and follow the prompts. But do this from a WiFi place somewhere, because you won’t have data access until after you’ve sorted this out... Oh, and if you get a prepaid sim with “unlimited data”, you will still need to get a Data Feature for it. And just for the record – this is WAY easier if you’re going to the UK. I dropped into a T-mobile shop there, and bought a prepaid sim card for five quid, which gave me 250MB data and some (but not much) call credit. In Australia it’s even easier, because you can buy data-enabled sim cards that work in smartphones from the airport when you arrive. I think having access to data really helps you feel at home in a different place. It means you can pull up maps, see what your friends are doing, and more. Hopefully this post helps, but feel free to post comments with extra information if you have it. @rob_farley

  Read the article

< Previous Page | 568 569 570 571 572 573 574 575 576 577 578 579  | Next Page >