Search Results

Search found 57569 results on 2303 pages for 'windows scheduler'.

Page 574/2303 | < Previous Page | 570 571 572 573 574 575 576 577 578 579 580 581  | Next Page >

  • Windows 7 x64 wired connection problem. IP, gateway, dns assigned, can't ping. Network detected as "Network"

    - by Emil Lerch
    I am having a problem connecting to a specific wired network with my Latitude E6410 laptop. Other wired networks seem to work fine, but this one does not. I have a coworker with me with the same Intel 82577LM Gigabit Network card, and he can connect just fine. I've updated to the latest Intel drivers (11.8.75.0) and am not using Pro Set. I obtain all DHCP information just fine (IP, netmask, DNS server, default gateway). I cannot ping anything (internal or on the Internet - I tried pinging Google's public DNS servers by IP 8.8.8.8), nor can I get answers to any DNS queries through NS Lookup. Windows troubleshooting says everything is fine, but I can't get DNS responses. I've seen issues like this in the past that were related to link speed/duplex autonegotiaion failures, so I've tried manually setting link speed/duplex to all values one by one with no success. My coworker is using all default settings, so he is just using autonegotiate. Any ideas of other things to try?

    Read the article

  • What privilege level is required on a Windows client workstation on an ActiveDomain to break file lo

    - by Mike Burton
    I'm not sure if I should be asking this here or on StackOverflow, but here goes: I'm part of a team maintaining a document management application, and I'm trying to figure out Windows file locking permissions. We use a utility somebody downloaded years ago called psunlock to remotely close all locks on a file. We recently discovered that this does not work across different domains on our VPN. A little bit of digging lead me to the samba manual's discussion of file locking. I still don't really "get it", though. Does anyone have any insight to share into how the process of locking and breaking locks on files works in a network context? My thinking is that privileges are required both on the file appliance and on the client workstations which hold locks. Is that accurate? Can anyone give a more specific version? Ideally I'm looking for something along the lines of A user must have privilege level X in order to break locks held from a client workstation. In practice I'd be happy with a hotlink to a good white paper on the subject.

    Read the article

  • Troubleshooting loss of network connectivity in Windows 2003 - What else to check?

    - by Benny
    We are facing a weird problem in our data center. Our Backup server (running EMC Networker) loses network connection every alternate day around 3:00 AM (Backup schedule starts at midnight). After 2 hours of outage, the network connectivity recovers automatically and back to normal. What we observed: It is unlikely to be network issue, since it is directly connected to server farm switch (layer 2 connection without any intermediate hops). Further, the server is connected to two different switches for Load balancing using Broadcomm Teaming. a) If it were a switch related issue it is unlikely that both the network ports go down, since they are connected to different switch. b) A possibility Vlan wide issue is also ruled out since other devices in the same Vlan are fine. c) Switch interface status is always up. But there are lot of packet drops during the outage period - Can be attributed to high interface utilization of the backup server (near 100%) d) Connectivity is restored without any change on network. Next suspect is resource utilization on Windows server. Both CPU and Memory have rarely exceeded 80%, but NIC card utilization is alarmingly high (near 100%) Not really sure how to investigate this?

    Read the article

  • Windows Azure Tools for Microsoft Visual Studio 1.2 (June 2010)

    - by Eric Nelson
    Yey – we have a public release of the Windows Azure Tools which fully supports Visual Studio 2010 RTM and the .NET 4 Framework. And the biggy I have been waiting for – IntelliTrace support to debug your cloud deployed services (Requires  VS2010 Ultimate) Download today http://bit.ly/azuretoolsjune New for version 1.2: Visual Studio 2010 RTM Support: Full support for Visual Studio 2010 RTM. .NET 4 support: Choose to build services targeting either the .NET 3.5 or .NET 4 framework. Cloud storage explorer: Displays a read-only view of Windows Azure tables and blob containers through Server Explorer. Integrated deployment: Deploy services directly from Visual Studio by selecting ‘Publish’ from Solution Explorer. Service monitoring: Keep track of the state of your services through the ‘compute’ node in Server Explorer. IntelliTrace support for services running in the cloud: Adds support for debugging services in the cloud by using the Visual Studio 2010 IntelliTrace feature. This is enabled by using the deployment feature, and logs are retrieved through Server Explorer. Related Links: http://ukazure.ning.com for UK fans of Windows Azure IntelliTrace explained

    Read the article

  • Windows Server task manager displays much higher memory use than sum of all processes' working set s

    - by Sleepless
    I have a 16 GB Windows Server 2008 x64 machine mostly running SQL Server 2008. The free memory as seen in Task Manager is very low (128 MB at the moment), i.e. about 15.7 GB are used. So far, so good. Now when I try to narrow down the process(es) using the most memory I get confused: None of the processes have more than 200MB Working Set Size as displayed in the 'Processes' tab of Task Manager. Well, maybe the Working Set Size isn't the relevant counter? To figure that out I used a PowerShell command [1] to sum up each individual property of the process object in sort of a brute force approach - surely one of them must add up to the 15.7 GB, right? Turns out none of them does, with the closest being VirtualMemorySize (around 12.7 GB) and PeakVirtualMemorySize (around 14.7 GB). WTF? To put it another way: Which of the numerous memory related process information is the "correct" one, i.e. counts towards the server's physical memory as displayed in the Task Manager's 'Performance' tab? Thank you all! [1] $erroractionpreference="silentlycontinue"; get-process | gm | where-object {$.membertype -eq "Property"} | foreach-object {$.name; (get-process | measure-object -sum $_.name ).sum / 1MB}

    Read the article

  • How to fix Quicktime video color problems on nVidia chipset and Windows XP?

    - by Matthew Glidden
    My laptop frequently plays video as if in very low-color mode. Though the sound remains clear, it looks terrible, showing only a few shades of red, blue, or yellow. (It's even worse than 8-bit color.) The problem doesn't happen consistently, so I'm looking for troubleshooting advice or known solutions. I use a Dell Latitude D620 laptop with Windows XP, on-board nVidia video chipset, Quicktime, and multiple monitors (laptop screen + VGA-connected LCD). Color problems happen in each application I tried, iTunes, a browser, and the Quicktime standalone player. It doesn't happen right after reboot, so could be from a sleep-wake cycle, or at least being on for an extended period. Google results suggest reinstalling nVidia drivers, which I've done several times with no change. I have found 2 workarounds. Reboot, sacrificing significant time and disrupting work In nVidia control panel, change color to 16-bit, and then back to 32-bit This happens with all video playback, so it's definitely not one corrupt file. I use workaround #2 consistently, but would love a longer-term solution.

    Read the article

  • Launch Windows Explorer From Current Command Prompt Folder

    - by Gopinath
    While using Command prompt did you ever felt like accessing the files of current folder using Windows Explorer? Here is a simple command that launches Windows Explorer and opens up current folder content         explorer .   This tip is very handy for all the command prompt lovers to quickly return to Windows Explorer and perform some mouse based operations. via how to geek Join us on Facebook to read all our stories right inside your Facebook news feed.

    Read the article

  • Windows move to external monitor when closing lid

    - by Martijn
    I'm using Cinnamon (on 12.10) on a laptop (Compaq 6710b business model) with an external monitor. Both screens run at 1680 x 1050, the external monitor is located on the right. During normal operation everything works fine; windows open in whatever monitor my mouse pointer is when they open and I can freely drag them to the other monitor. When I close the lid of my laptop both displays shut down as expected. When I open the lid, however, the lock window opens on the external monitor and any windows that were open on the laptop screen have moved to the external monitor as well. Nothing happens between closing the lid and opening it; no suspend, powerdown, hibernate or anything, monitor stays attached; even mouse is untouched (pointer on laptop screen). Is there any way to fix it so my windows stay on whatever monitor I left them before closing the lid? Alternative solutions are welcome.

    Read the article

  • Can I run MS Office apps installed under windows with Ubuntu

    - by Richard
    I don't have the option of installing the MS Office apps under Wine mostly as I simply don't have them, but these apps do exist on the workstation I use at work. I have installed Ubuntu on this machine on the same partition as MS Windows via the run-Ubuntu-as-a-Windows-app (not quite verbatim) installation instructions. The MS Windows is XP Professional and the MS Office version is 2007. Perhaps there are two scenarios, one where I can simply use the apps where they sit, and another where I can somehow "install" the existing executables into Ubuntu (Wine?) rather than installing their iso's (or whatever), which, again, i don't have. Anyway, whatever you can tell me about this is good with me. Thank you so much.

    Read the article

  • .NET development on a Retina MacBook Pro with Windows 8

    - by Jeff
    I remember sitting in Building 5 at Microsoft with some of my coworkers, when one of them came in with a shiny new 11” MacBook Air. It was nearly two years ago, and we found it pretty odd that the OEM’s building Windows machines sucked at industrial design in a way that defied logic. While Dell and HP were in a race to the bottom building commodity crap, Apple was staying out of the low-end market completely, and focusing on better design. In the process, they managed to build machines people actually wanted, and maintain an insanely high margin in the process. I stopped buying the commodity crap and custom builds in 2006, when Apple went Intel. As a .NET guy, I was still in it for Microsoft’s stack of development tools, which I found awesome, but had back to back crappy laptops from HP and Dell. After that original 15” MacBook Pro, I also had a Mac Pro tower (that I sold after three years for $1,500!), a 27” iMac, and my favorite, a 17” MacBook Pro (the unibody style) with an SSD added from OWC. The 17” was a little much to carry around because it was heavy, but it sure was nice getting as much as eight hours of battery life, and the screen was amazing. When the rumors started about a 15” model with a “retina” screen inspired by the Air, I made up my mind I wanted one, and ordered it the day it came out. I sold my 17”, after three years, for $750 to a friend who is really enjoying it. I got the base model with the upgrade to 16 gigs of RAM. It feels solid for being so thin, and if you’ve used the third generation iPad or the newer iPhone, you’ll be just as thrilled with the screen resolution. I’m typically getting just over six hours of battery life while running a VM, but Parallels 8 allegedly makes some power improvements, so we’ll see what happens. (It was just released today.) The nice thing about VM’s are that you can run more than one at a time. Primarily I run the Windows 8 VM with four cores (the laptop is quad-core, but has 8 logical cores due to hyperthreading or whatever Intel calls it) and 8 gigs of RAM. I also have a Windows Server 2008 R2 VM I spin up when I need to test stuff in a “real” server environment, and I give it two cores and 4 gigs of RAM. The Windows 8 VM spins up in about 8 seconds. Visual Studio 2012 takes a few more seconds, but count part of that as the “ReSharper tax” as it does its startup magic. The real beauty, the thing I looked most forward to, is that beautifully crisp C# text. Consolas has never looked as good as it does at 10pt. as it does on this display. You know how it looks great at 80pt. when conference speakers demo stuff on a projector? Think that sharpness, only tiny. It’s just gorgeous. Beyond that, everything is just so responsive and fast. Builds of large projects happen in seconds, hundreds of unit tests run in seconds… you just don’t spend a lot of time waiting for stuff. It’s kind of painful to go back to my 27” iMac (which would be better if I put an SSD in it before its third birthday). Are there negatives? A few minor issues, yes. As is the case with OS X, not everything scales right. You’ll see some weirdness at times with splash screens and icons and such. Chrome’s text rendering (in Windows) is apparently not aware of how to deal with higher DPI’s, so text is fuzzy (the OS X version is super sharp, however). You’ll also have to do some fiddling with keyboard settings to use the Windows 8 keyboard shortcuts. Overall, it’s as close to a no-compromise development experience as I’ve ever had. I’m not even going to bother with Boot Camp because the VM route already exceeds my expectations. You definitely get what you pay for. If this one also lasts three years and I can turn around and sell it, it’s worth it for something I use every day.

    Read the article

  • Why does hiberfil.sys come back from the dead on Windows 7?

    - by Corey White
    I have Windows 7 running on a small (40GB) partition, with 4GB ram. This means that the hiberfil.sys file created by Hibernate takes up a significant portion of the available diskspace. I would like to remove it. I am aware that I can disable Hibernate and remove hiberfil.sys by entering powercfg -h off in an elevated command prompt. This works -- the file is immediately removed, and after doing so, the HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Power\HibernateEnabled key is (correctly) set to 0. However, the next time I reboot the PC, hiberfil.sys returns from the dead, Hibernate is reenabled, and that registry key has returned to 1. I'm pretty much at my wits' end with this. Almost everything I can find online related to removing the hiberfil.sys file simply suggests using powercfg to turn off hibernation, and that appears to work for just about everyone. But it just keeps coming back for me! (Like a vampire, sucking up my disk space.) I did find one other thread from someone who seems to have had the same issue, but none of the suggestions there worked for the original poster (or for me). Still, I have tried everything listed there, including: Disabling hybrid sleep Disabling Hibernate through the command prompt, through the Power Options GUI, and through both (in both orders) Manually changing the HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Power\HibernateEnabled key Pretty much everything else I can think of! I do want to reiterate that I have no problem removing the file -- that works great. It just comes back after every reboot. I'm about ready to throw in the towel and just run a script on login to disable Hibernate each time, even though that seems like a crazily hacky "solution" . . . but I was hoping someone here could suggest something else, first. Thanks!

    Read the article

  • Why do webpages take longer to loo in ubuntu 12.04 than Windows 7

    - by Emil Abraham
    For example, when I click on a Facebook picture, the picture remains pixelated for about 30 seconds, then starts to clear up. Or when I watch YouTube videos, I can't watch them on HD without running into buffer issues. Windows 7 is just much snappier. It might be an issue with the graphics card. Dualbooting Windows 7 64bit & Ubuntu 12.04 64 bit Specs: CPU: Intel® Core™ i7-2630QM CPU @ 2.00GHz × 8 RAM: 8GB DDR3 HDD: 50 GB to Ubuntu & Remaining 1.5 TB to Windows The interesting part: Graphics Card: On System Settings in Ubuntu: Intel® Sandybridge Mobile Graphics Card: What it should be: Radeon™ HD 7690M XT switchable graphics with 1024MB GDDR5 and up to 5093MB total graphics memory

    Read the article

  • Windows for IoT, continued

    - by Valter Minute
    Originally posted on: http://geekswithblogs.net/WindowsEmbeddedCookbook/archive/2014/08/05/windows-for-iot-continued.aspxI received many interesting feedbacks on my previous blog post and I tried to find some time to do some additional tests. Bert Kleinschmidt pointed out that pins 2,3 and 10 of the Galileo are connected directly to the SOC, while pin 13, the one used for the sample sketch is controlled via an I2C I/O expander. I changed my code to use pin 2 instead of 13 (just changing the variable assignment at the beginning of the code) and latency was greatly reduced. Now each pulse lasts for 1.44ms, 44% more than the expected time, but ways better that the result we got using pin 13. I also used SetThreadPriority to increase the priority of the thread that was running the sketch to THREAD_PRIORITY_HIGHEST but that didn't change the results. When I was using the I2C-controlled pin I tried the same and the timings got ways worse (increasing more than 10 times) and so I did not commented on that part, wanting to investigate the issua a bit more in detail. It seems that increasing the priority of the application thread impacts negatively the I2C communication. I tried to use also the Linux-based implementation (using a different Galileo board since the one provided by MS seems to use a different firmware) and the results of running the sample blink sketch modified to use pin 2 and blink the led for 1ms are similar to those we got on the same board running Windows. Here the difference between expected time and measured time is worse, getting around 3.2ms instead of 1 (320% compared to 150% using Windows but far from the 100.1% we got with the 8-bit Arduino). Both systems were not under load during the test, maybe loading some applications that use part of the CPU time would make those timings even less reliable, but I think that those numbers are enough to draw some conclusions. It may not be worth running a full OS if what you need is Arduino compatibility. The Arduino UNO is probably the best Arduino you can find to perform this kind of development. The Galileo running the Linux-based stack or running Windows for IoT is targeted to be a platform for "Internet of Things" devices, whatever that means. At the moment I don't see the "I" part of IoT. We have low level interfaces (SPI, I2C, the GPIO pins) that can be used to connect sensors but the support for connectivity is limited and the amount of work required to deliver some data to the cloud (using a secure HTTP request or a message queuing system like APMQS or MQTT) is still big and the rich OS underneath seems to not provide any help doing that.Why should I use sockets and can't access all the high level connectivity features we have on "full" Windows?I know that it's possible to use some third party libraries, try to build them using the Windows For IoT SDK etc. but this means re-inventing the wheel every time and can also lead to some IP concerns if used for products meant to be closed-source. I hope that MS and Intel (and others) will focus less on the "coolness" of running (some) Arduino sketches and more on providing a better platform to people that really want to design devices that leverage internet connectivity and the cloud processing power to deliver better products and services. Providing a reliable set of connectivity services would be a great start. Providing support for .NET would be even better, leaving native code available for hardware access etc. I know that those components may require additional storage and memory etc. So making the OS componentizable (or, at least, provide a way to install additional components) would be a great way to let developers pick the parts of the system they need to develop their solution, knowing that they will integrate well together. I can understand that the Arduino and Raspberry Pi* success may have attracted the attention of marketing departments worldwide and almost any new development board those days is promoted as "XXX response to Arduino" or "YYYY alternative to Raspberry Pi", but this is misleading and prevents companies from focusing on how to deliver good products and how to integrate "IoT" features with their existing offer to provide, at the end, a better product or service to their customers. Marketing is important, but can't decide the key features of a product (the OS) that is going to be used to develop full products for end customers integrating it with hardware and application software. I really like the "hackable" nature of open-source devices and like to see that companies are getting more and more open in releasing information, providing "hackable" devices and supporting developers with documentation, good samples etc. On the other side being able to run a sketch designed for an 8 bit microcontroller on a full-featured application processor may sound cool and an easy upgrade path for people that just experimented with sensors etc. on Arduino but it's not, in my humble opinion, the main path to follow for people who want to deliver real products.   *Shameless self-promotion: if you are looking for a good book in Italian about the Raspberry Pi , try mine: http://www.amazon.it/Raspberry-Pi-alluso-Digital-LifeStyle-ebook/dp/B00GYY3OKO

    Read the article

  • OWB - 11.2.0.4 Windows standalone client released

    - by David Allan
    The 11.2.0.4 release of OWB containing the 32 bit and 64 bit standalone Windows client is released today, I had previously blogged about the Linux standalone client here. Big thanks to Anil for spearheading that, another milestone on the Data Integration roadmap. Below are the patch numbers; 17743124 - OWB 11.2.0.4 STANDALONE CLIENT FOR Windows 64 BIT 17743119 - OWB 11.2.0.4 STANDALONE CLIENT FOR Windows 32 BIT This is the terminal release of OWB and customer bugs will be resolved on top of this release. We are excited to share information on the Oracle Data Integration 12c release in our upcoming launch video webcast on November 12th.

    Read the article

  • How To Create a Shortcut That Lets a Standard User Run An Application as Administrator

    - by Chris Hoffman
    Want to allow a standard user account to run an application as administrator without a UAC or password prompt? You can easily create a shortcut that uses the runas command with the /savecred switch, which saves the password. Note that using /savecred could be considered a security hole – a standard user will be able to use the runas /savecred command to run any command as administrator without entering a password. However, it’s still useful for situations where this doesn’t matter much – perhaps you want to allow a child’s standard user account to run a game as Administrator without asking you. We’ve also covered allowing a user to run an application as Administrator with no UAC prompts by creating a scheduled task. HTG Explains: Is ReadyBoost Worth Using? HTG Explains: What The Windows Event Viewer Is and How You Can Use It HTG Explains: How Windows Uses The Task Scheduler for System Tasks

    Read the article

  • Unable to install Ubuntu 12.10 on windows 8 machine/ error no5

    - by JOBIN VARGHESE
    installing crashes at halfway of 'copying files' showing an i\o device error error no5; there was problem in beginning of installation too, ubuntu was not detecting the installed windows 8. my system is a dell inspiron 5520 laptop ,with 1 tb WDC hard disk in GPT ,with EFI . my current partition is like 102 mb EFI SYSTEM partition 200 gb Windows 8 ntfs 22 gb root Ext4 8 gb swap 20 db home Ext4 680 gb ntfs Drive for storing all my files. i tried both dvd disc and usb drive, both resulted in same error. inbuild dell hardware diagnosis utility showed both hard disk and dvd drive as healthy what may be the reason and how can i install ubuntu along side my windows 8?

    Read the article

  • Reset Windows Password with Ubuntu Live CD

    - by snix
    A friend brought me his PC with Windows Vista to reset the user password because he didn't use it for a long while and forgot his password. So I found a tutorial on how to reset the password by using a Ubuntu Live CD and the software chntpw. After I installed this software I mounted the SYSTEM partition by opening it with the file explorer. It is now available at /media/SYSTEM/ The tutorial says I have to open the file /windows/system32/config/sam with chntpw and reset the password with chntpw -u USERNAME sam After I did this it didn't show me any errors. So I unmounted the partition and rebooted the PC with the installed Windows Vista. It is still locked with the old password. Did I do any mistakes or is there an other way to reset the password?

    Read the article

  • Can I use a Windows Server 2003 Domain Controller but my home router for DNS?

    - by NetworkingWannabie
    Hi All Probably easiest to start with a description of my current setup, which works (oh, and this is a home setup not an office or anything): I have an ADSL modem with a static IP address (192.168.128.1), and its DHCP capability is disabled. I have a permanently powered up Windows Server 2003 machine with a fixed IP (192.168.128.2) which provides my domain controller, dhcp, and dns. The default gateway for everything is my ADSL modem everything is setup to use the WS2003 machine as the primary DNS with the ADSL modem as Secondary DNS just in case the server goes down (everything includes the server itself). Lastly, just in case it's relevant, I have my DHCP leases set to infinite (or whatever the right term is). Everything is pretty hunky dory. Except, that is, for the fact that my server is ALWAYS on, and it isn't always used, so I'm burning juice that I don't need to - my server burns around 120W which isn't immense but isn't irrelevant either, so I'd like to put it into a stand-by state when it isn't being used (the more standby the better) and then get the clients to wake it up. Am I correct in assuming that this won't work at the moment - A given client would need an IP address to wake the machine up, and it needs to machine to be awake to get an IP - catch 22? Assuming I'm correct, can I move to using my router (which is always on) for DHCP? What impact will this have on DC and DNS? Alternatively, does anyone have a better way for me to achieve this? Can I get the server to wake up when it sees clients look for a DHCP server, etc? Wow, that came out longer than expected! Thanks for your help.

    Read the article

  • Deleting certain files sits at "preparing to recycle" on Windows 7?

    - by Rachel
    We recently setup one of our users with a brand new Windows 7 computer, however she is unable to delete certain files. With some testing, I found I cannot move, rename, or view properties of these files either. When trying to delete the file, it just sits at the "Preparing to recycle" popup, however the "from" section says "Discovering items..." Clicking "More Details" on the popup shows me that it can't find the file name or where it's recycling from: Other notes... All the affected files are .pdf files that get created via a scanner. Other pdf files are fine. Opening the files works fine. I can open the file, Save As a new file, and delete the new one just fine Trying to delete the file via command prompt just sits there Rebooting the computer will let me manipulate the files like normal, however this user is responsible for scanning hundreds of documents a day and I'd rather not have to tell her to reboot her computer to delete files. The user is part of the administrator group on the computer The Owner of the affected files is the user attrib of files is just A

    Read the article

  • Ubuntu wont boot after installing Windows 8

    - by brian
    Ubuntu wont boot up after I installed Windows 8. I get this error: Windows Failed to start. "A recent hardware or software change might be the cause. To fix the problem: Insert your windows installation disc and restart your computer. Choose your language settings, and then click "next." Click "Repair your computer." If you do not have this disc, contact your system administrator or computer manufacturer for assistance. File: \ubuntu\winboot\wubildr.mbr status: 0xc000000f

    Read the article

  • How do I diagnose the cause of a freeze after resuming in Windows XP (SP3)?

    - by Software Monkey
    I have just built a new computer from parts. Whenever I resume from any sleep mode (S1, S3 or S4) the computer freezes within about 60 seconds of the welcome screen appearing. I have updated the BIOS and all drivers to current from the motherboard manufacturer's site. I have reset BIOS settings to default, including disabling AMD Cool n Quiet. The windows event logs are not helpful at all. Other than immediately after resuming the system is stable as long as AMD CnQ is disabled. The system is: Mobo : MSI 790GX-G65 CPU : AMD Phenom II 965 BE at 3.6 GHz Memory : Corsair DDR3 1600, at 1333 MHz and 9-9-9-21 HDDs : 1 EIDE, 2 SATA in RAID-0 DVD : 1 Card Reader: 1 multi-card reader Keyboard is attached via PS2 and mouse is USB. Any thoughts or pointers would be most welcome. EDIT: It appears that the computer may not freeze if a program is left running which puts it under significant load. I left a stress test running which keeps all cores under 85% load, and my son put the computer to sleep - while this program is running it I have been able to resume from S3 successfully 4 times, compared against about 20 tests with the computer idle which have all frozen. So this may be related to being in an idle state when it resumes.

    Read the article

  • Windows 7 notebook turn off by itself, how to check if it is due to CPU being too hot?

    - by Jian Lin
    I have a Dell Studio 15 notebook, and it just started turning off by itself yesterday. Could it be that the CPU is too hot? I have had several notebooks before and every one of them I can put them on the bed without any problem. This Dell Studio Notebook, however, seems like have the air / fan outlet pointed outward from the bottom back of the notebook, so I suspect that the air is partially blocked when it is on the bed. Are there Win 7 tools that can monitor the CPU temperature, or will some 3rd party tool be needed? (I try to stick to official tools nowadays). Also, it is running Win 7 Ulitmate, there is actually no utility or background service from Win 7 or from Dell that detects when the temperature is too hot (or 95% near the max), pop out a message box giving a warning and say that the computer will go into sleep mode in 1 minute, but instead just turn off the computer by brute force (cutting out the power) right then and there? Update: it turned off right in front of my eyes -- it is not doing any windows update or anything. just normal use and jooooop, it turned off.

    Read the article

  • Which events specifically cause Windows 2008 to mark a SAN volume offline?

    - by Jeremy
    I am searching for specific criteria/events that will cause Windows 2008 to mark a SAN volume as offline in disk management, even though it is connected to that SAN volume via FC or iSCSI. Microsoft states that "A dynamic disk may become Offline if it is corrupted or intermittently unavailable. A dynamic disk may also become Offline if you attempt to import a foreign (dynamic) disk and the import fails. An error icon appears on the Offline disk. Only dynamic disks display the Missing or Offline status." I am specifically wondering if, on the SAN, changing the path to the disk (such as the disk being presented to the host via a different iSCSI target IQN or a different LUN #) would cause a volume to be offlined in disk management. Thanks! Edit: I have already found two reasons why a disk might be set offline, disk signature collisions and the SAN disk policy. Bounty would be awarded to someone who can find further documented reasons related to changes in the volume's path. Disk signature collisions: http://blogs.technet.com/b/markrussinovich/archive/2011/11/08/3463572.aspx SAN disk policy: http://jeffwouters.nl/index.php/2011/06/disk-offline-with-error-the-disk-is-offline-because-of-a-policy-set-by-an-administrator/

    Read the article

  • Migrating an Existing ASP.NET App to run on Windows Azure

    - by kaleidoscope
    Converting Existing ASP.NET application in to Windows Azure Method 1:  1. Add a Windows Azure Cloud Service to the existing solution                         2. Add WebRole Project in solution and select Existing Asp.Net project in it. Method 2: The other option would have been to create a new Cloud Service project and add the ASP.NET project (which you want to deploy on Azure) to it using -                    1. Solution | Add | Existing Project                    2. Add | Web Role Project in solution Converting Sql server database to SQL Azure - Step 1: Migrate the <Existing Application>.MDF Step 2: Migrate the ASP.NET providers Step 3: Change the connection strings More details can be found at http://blogs.msdn.com/jnak/archive/2010/02/08/migrating-an-existing-asp-net-app-to-run-on-windows-azure.aspx   Ritesh, D

    Read the article

  • Windows Azure powers Father Christmas

    - by Eric Nelson
    Ok it doesn’t really but the Microsoft Partner Network folks have hit gold with this rather addictive chrimbo game. It is great fun to play yet has a little serious side as it “rewards” you with a Windows Azure related link after each level. Try it now! http://bit.ly/festivegame It is a Silverlight app which is: Related In the UK we are helping partners build applications for the Windows Azure Platform (and other technologies such as SQL Server 2008 R2) through Microsoft Platform Ready. Sign up for FREE to get access to some great benefits (more on that in a future post). It also really helps us better understand the demand out there which directly impacts how we will plan the next six months of activities around the Windows Azure Platform. P.S. I nearly forgot. Can I be the first (hopefully) to wish you Merry Christmas!

    Read the article

< Previous Page | 570 571 572 573 574 575 576 577 578 579 580 581  | Next Page >