Search Results

Search found 15007 results on 601 pages for 'array'.

Page 575/601 | < Previous Page | 571 572 573 574 575 576 577 578 579 580 581 582  | Next Page >

  • Technical non-terminating condition in a loop

    - by Snarfblam
    Most of us know that a loop should not have a non-terminating condition. For example, this C# loop has a non-terminating condition: any even value of i. This is an obvious logic error. void CountByTwosStartingAt(byte i) { // If i is even, it never exceeds 254 for(; i < 255; i += 2) { Console.WriteLine(i); } } Sometimes there are edge cases that are extremely unlikeley, but technically constitute non-exiting conditions (stack overflows and out-of-memory errors aside). Suppose you have a function that counts the number of sequential zeros in a stream: int CountZeros(Stream s) { int total = 0; while(s.ReadByte() == 0) total++; return total; } Now, suppose you feed it this thing: class InfiniteEmptyStream:Stream { // ... Other members ... public override int Read(byte[] buffer, int offset, int count) { Array.Clear(buffer, offset, count); // Output zeros return count; // Never returns -1 (end of stream) } } Or more realistically, maybe a stream that returns data from external hardware, which in certain cases might return lots of zeros (such as a game controller sitting on your desk). Either way we have an infinite loop. This particular non-terminating condition stands out, but sometimes they don't. A completely real-world example as in an app I'm writing. An endless stream of zeros will be deserialized into infinite "empty" objects (until the collection class or GC throws an exception because I've exceeded two billion items). But this would be a completely unexpected circumstance (considering my data source). How important is it to have absolutely no non-terminating conditions? How much does this affect "robustness?" Does it matter if they are only "theoretically" non-terminating (is it okay if an exception represents an implicit terminating condition)? Does it matter whether the app is commercial? If it is publicly distributed? Does it matter if the problematic code is in no way accessible through a public interface/API? Edit: One of the primary concerns I have is unforseen logic errors that can create the non-terminating condition. If, as a rule, you ensure there are no non-terminating conditions, you can identify or handle these logic errors more gracefully, but is it worth it? And when? This is a concern orthogonal to trust.

    Read the article

  • php regex guitar tab (tabs or tablature, a type of music notation)

    - by John
    I am in the process of creating a guitar tab to rtttl (Ring Tone Text Transfer Language) converter in PHP. In order to prepare a guitar tab for rtttl conversion I first strip out all comments (comments noted by #- and ended with -#), I then have a few lines that set tempo, note the tunning and define multiple instruments (Tempo 120\nDefine Guitar 1\nDefine Bass 1, etc etc) which are stripped out of the tab and set aside for later use. Now I essentially have nothing left except the guitar tabs. Each tab is prefixed with it's instrument name in conjunction with the instrument name noted prior. Some times we have tabs for 2 separate instruments that are linked because they are to be played together, ie a Guitar and a Bass Guitar playing together. Example 1, Standard Guitar Tab: |Guitar 1 e|--------------3-------------------3------------| B|------------3---3---------------3---3----------| G|----------0-------0-----------0-------0--------| D|--------0-----------0-------0-----------0------| A|------2---------------2---2---------------2----| E|----3-------------------3-------------------3--| Example 2, Conjunction Tab: |Guitar 1 e|--------------3-------------------3------------| B|------------3---3---------------3---3----------| G|----------0-------0-----------0-------0--------| D|--------0-----------0-------0-----------0------| A|------2---------------2---2---------------2----| E|----3-------------------3-------------------3--| | | |Bass 1 G|----------0-------0-----------0-------0--------| D|--------2-----------2-------2-----------2------| A|------3---------------3---3---------------3----| E|----3-------------------3-------------------3--| I have considered other methods of identifying the tabs with no solid results. I am hoping that someone who does regular expressions could help me find a way to identify a single guitar tab and if possible also be able to match a tab with multiple instruments linked together. Once the tabs are in an array I will go through them one line at a time and convert them into rtttl lines (exploded at each new line "\n"). I do not want to separate the guitar tabs in the document via explode "\n\n" or something similar because it does not identify the guitar tab, rather, it is identifying the space between the tabs - not on the tabs themselves. I have been messing with this for about a week now and this is the only major hold up I have. Everything else is fairly simple. As of current, I have tried many variations of the regex pattern. Here is one of the most recent test samples: <?php $t = " |Guitar 1 e|--------------3-------------------3------------| B|------------3---3---------------3---3----------| G|----------0-------0-----------0-------0--------| D|--------0-----------0-------0-----------0------| A|------2---------------2---2---------------2----| E|----3-------------------3-------------------3--| |Guitar 1 e|--------------3-------------------3------------| B|------------3---3---------------3---3----------| G|----------0-------0-----------0-------0--------| D|--------0-----------0-------0-----------0------| A|------2---------------2---2---------------2----| E|----3-------------------3-------------------3--| | | |Bass 1 G|----------0-------0-----------0-------0--------| D|--------2-----------2-------2-----------2------| A|------3---------------3---3---------------3----| E|----3-------------------3-------------------3--| "; preg_match_all("/^.*?(\\|).*?(\\|)/is",$t,$p); print_r($p); ?> It is also worth noting that inside the tabs, where the dashes and #'s are, you may also have any variation of letters, numbers and punctuation. The beginning of each line marks the tuning of each string with one of the following case insensitive: a,a#,b,c,c#,d,d#,e,f,f#,g or g. Thanks in advance for help with this most difficult problem.

    Read the article

  • arrayListOutOfBoundsException... Please Help?

    - by Jacob
    This is my class Debugger. Can anyone try and run it and see whens wrong? Ive spent hours on it already. :( public class Debugger { private String codeToDebug = ""; public Debugger(String code) { codeToDebug = code; } /** * This method itterates over a css file and adds all the properties to an arraylist */ public void searchDuplicates() { boolean isInside = false; ArrayList<String> methodStorage = new ArrayList(); int stored = 0; String[] codeArray = codeToDebug.split(""); try { int i = 0; while(i<codeArray.length) { if(codeArray[i].equals("}")) { isInside = false; } if(isInside && !codeArray[i].equals(" ")) { boolean methodFound = false; String method = ""; int c = i; while(!methodFound) { method += codeArray[c]; if(codeArray[c+1].equals(":")) { methodFound = true; } else { c++; } } methodStorage.add(stored, method); System.out.println(methodStorage.get(stored)); stored++; boolean stillInside = true; int skip = i; while(stillInside) { if(codeArray[skip].equals(";")) { stillInside = false; } else { skip++; } } i = skip; } if(codeArray[i].equals("{")) { isInside = true; } i++; } } catch(ArrayIndexOutOfBoundsException ar) { System.out.println("------- array out of bounds exception -------"); } } /** * Takes in String and outputs the number of characters it contains * @param input * @return Number of characters */ public static int countString(String input) { String[] words = input.split(""); int counter = -1; for(int i = 0; i<words.length; i++){ counter++; } return counter; } public static void main(String[] args) { Debugger h = new Debugger("body {margin:;\n}"); h.searchDuplicates(); } }

    Read the article

  • Google Maps API - Marker not showing

    - by popnbrown
    I'm trying to add markers for every single row from a table, that sits on the page. The page is http://www.sravanks.com/first/2013ftcmap.php This is the JS code that's loading the markers: $(document).ready(function() { var mapOptions = { center: new google.maps.LatLng(39.740, -89.503), zoom: 7 }; var map = new google.maps.Map(document.getElementById("map-canvas"), mapOptions); var infowindow = new google.maps.InfoWindow(); /* City Markers */ var cityCircle = new Array(); var i = 0; $.each($('.events tr'), function(index, value) { var name = $(this).find('td:first()').html(); var address = $(this).find('.address').html(); var linkUrl = "http://www.sravanks.com/first/geocode.php?address=" + address; $.ajax({ url: linkUrl }).done(function(data){ var json = $.parseJSON(data.substring(0, data.length-1)); lat = json.results[0].geometry.location.lat; lng = json.results[0].geometry.location.lng; var latlng = new google.maps.LatLng(lat, lng); var marker = new google.maps.Marker({ position: latlng, map: map, icon: 'map-pointer-medium.gif' }); google.maps.event.addListener(marker, 'click', function() { infowindow.setContent(name); infowindow.open(map, marker); cityCircle[i] = new google.maps.Circle({strokeColor: '#00FF00', strokeOpacity: 0.8, strokeWeight: 2, fillColor: '#00FF00', fillOpacity: 0.35, map: map, center: latlng, radius: 144841}); i++; }); }); }); /*Team Markers*/ var markers = {}; var teamName, teamNumber, lat, lng, content; $.each($('.list tr'), function(index, value) { teamName = $(this).find('td.name').html(); teamNumber = $(this).find('td.number').html(); markers[teamNumber] = {}; lat = parseFloat($(this).find('td.lat').html()); lng = parseFloat($(this).find('td.lng').html()); content = "Name: " + teamName + "<br />Number: " + teamNumber; markers[teamNumber]['latlng'] = new google.maps.LatLng(lat, lng); markers[teamNumber]['marker'] = new google.maps.Marker({ position: markers[teamNumber]['latlng'], map: map }); google.maps.event.addListener(markers[teamNumber]['marker'], 'click', function() { infowindow.setContent(content); infowindow.open(map, markers[teamNumber]['marker']); }); }); google.maps.event.addListener(infowindow, 'closeclick', function() { for(var i=0;i<cityCircle.length;i++){ cityCircle[i].setMap(null); } }); }); I've got no errors, but the Team Markers do not show up. The strange thing is that the City Markers do show up. Some more info, the City Markers ajax call is just to a proxy that calls the google geocoding api. Again the link's at http://www.sravanks.com/first/2013ftcmap.php

    Read the article

  • symfony2.4 ajax call update or set session issues

    - by user3797283
    i have an issue with symfony2 when i use ajax to set session, hope u pro guys can help me. here is my controller code: //show month event list public function indexAction() { if ($this->getRequest()->isXmlHttpRequest()) { $paging = $this->getRequest()->get("nom"); $session = $this->getRequest()->getSession(); if ($paging) { //if $paging is set, then that's a click pager ajax event //(not 1st time load) $year = $paging; $session->set('year', $year); } else { //$paging is null, it's the first time page load $year = (new \DateTime())->format("Y"); $session->set('year', $year); } $repository = $this ->getDoctrine() ->getManager() ->getRepository('HycAccountBundle:MonthEvent'); $annuallist = $repository->monthListByYear($year); $jsonlist = json_encode($annuallist); return new Response($jsonlist); } //this part is to return entity to twig for using after $em = $this->getDoctrine()->getManager(); $allimages = $em->getRepository('HycAccountBundle:TypeImage') ->findAll(); return $this->render('HycAccountBundle:Account:index.html.twig', array('allimages' => $allimages)); } here is my twig code: <script type="text/javascript"> $(function() { $(document).ready(function (){ jQuery.ajax({ type: 'GET', cache: false, url: "{{ path('hyc_account_homepage') }}", success: function(data, textStatus, jqXHR) { alert({{app.session.get('year')}}); //!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! //!!!!!!!!! here i can get year 2014 !!!!!!!!!!!!!! //!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! }, error:function (){ alert('error!'); } }); return false; }); }); </script> but when i click pager part, for example, i click year 2013, then ajax call will return a number (data: 'nom=' + num) to controller, but there i reset session value to num normally, but i cant get alert correct session (it's always 2014 as the 1st time) here is the code ajax, almost same as above: <script type="text/javascript"> $(document).ready(function(){ //after paging, reload month $('#page-selection').bootpag({ total: 3000, page: 2014, maxVisible: 5 }).on('page', function(event, num){ jQuery.ajax({ type: 'GET', url: "{{ path('hyc_account_homepage') }}", data: 'nom=' + num, success: function(data, textStatus, jqXHR) { alert({{app.session.get('year')}}); //!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! //here is the problem, it's always 2014, not set again !!!!!!!! //!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! }, error:function (){ alert('error!'); } }); return false; }); }); </script> hope u guys help me, thanks in advance, i've tried for almost 1 day and looked for almost all in google but find nothing = =

    Read the article

  • Global NSMutableArray doesn't seem to be holding values

    - by diatrevolo
    I have a Cocos2D iPhone application that requires a set of CGRects overlaid on an image to detect touches within them. "Data" below is a class that holds values parsed from an XML file. "delegateEntries" is a NSMutableArray that contains several "data" objects, pulled from another NSMutableArray called "entries" that lives in the application delegate. For some strange reason, I can get at these values without problems in the init function, but further down the class in question, I try to get at these values, and the application crashes without an error message (as an example, I put in the "ccTouchBegan" method which accessess this data through the "populateFieldsForTouchedItem" method. Can anyone see why these values would not be accessible from other methods? No objects get released until dealloc. Thanks in advance! @synthesize clicked, delegate, data, image, blurImage, normalImage, arrayOfRects, delegateEntries; - (id)initWithTexture:(CCTexture2D *)aTexture { if( (self=[super initWithTexture:aTexture] )) { arrayOfRects = [[NSMutableArray alloc] init]; delegateEntries = [[NSMutableArray alloc] init]; delegate = (InteractivePIAppDelegate *)[[UIApplication sharedApplication] delegate]; delegateEntries = [delegate entries]; data = [delegateEntries objectAtIndex:0]; NSLog(@"Assigning %@", [[delegateEntries objectAtIndex:0] backgroundImage]); NSLog(@"%@ is the string", [[data sections] objectAtIndex:0]); //CGRect rect; NSLog(@"Count of array is %i", [delegateEntries count]); //collect as many items as there are XML entries for(int i=0; i<[delegateEntries count]; i++) { if([[delegateEntries objectAtIndex:i] xPos]) { NSLog(@"Found %i items", i+1); [arrayOfRects addObject:[NSValue valueWithCGRect:CGRectMake([[[delegateEntries objectAtIndex:i] xPos] floatValue], [[[delegateEntries objectAtIndex:i] yPos] floatValue], [[[delegateEntries objectAtIndex:i] xBounds] floatValue], [[[delegateEntries objectAtIndex:i] yBounds] floatValue])]]; } else { NSLog(@"Nothing"); } } //remove the following once the NSMutableArray from above works (legacy) blurImage = [[NSString alloc] initWithString:[data backgroundBlur]]; NSLog(@"5"); normalImage = [[NSString alloc] initWithString:[data backgroundImage]]; clicked = NO; } return self; } And then: - (void)populateFieldsForTouchedItem:(TouchedRect)touchInfo { Data *touchDatum = [[Data alloc] init]; touchDatum = [[self delegateEntries] objectAtIndex:touchInfo.recordNumber]; NSLog(@"Assigning %@", [[[self delegateEntries] objectAtIndex:touchInfo.recordNumber] backgroundImage]); rect = [[arrayOfRects objectAtIndex:touchInfo.recordNumber] CGRectValue]; image = [[NSString alloc] initWithString:[[touchDatum sections] objectAtIndex:0]]; [touchDatum release]; } - (BOOL)ccTouchBegan:(UITouch *)touch withEvent:(UIEvent *)event { TouchedRect touchInfo = [self containsTouchLocation:touch]; NSLog(@"Information pertains to %i", touchInfo.recordNumber); if ( !touchInfo.touched && !clicked ) { //needed since the touch location changes when zoomed NSLog(@"NOPE"); return NO; } [self populateFieldsForTouchedItem:touchInfo]; NSLog(@"YEP"); return YES; }

    Read the article

  • why resubmit after refresh php page

    - by user2719452
    why resubmit after refresh php page? try it, go to: http://qass.im/message-envelope/ and upload any image now try click F5, after refresh page "resubmit" Why? I don't want resubmit after refresh page What is the solution? See this is my form code: <form id="uploadedfile" name="uploadedfile" enctype="multipart/form-data" action="upload.php" method="POST"> <input name="uploadedfile" type="file" /> <input type="submit" value="upload" /> </form> See this is php code upload.php file: <?php $allowedExts = array("gif", "jpeg", "jpg", "png", "zip", "pdf", "docx", "rar", "txt", "doc"); $temp = explode(".", $_FILES["uploadedfile"]["name"]); $extension = end($temp); $newname = $extension.'_'.substr(str_shuffle(str_repeat("0123456789abcdefghijklmnopqrstuvwxyz", 7)), 4, 7); $imglink = 'attachment/attachment_file_'; $uploaded = $imglink .$newname.'.'.$extension; if ((($_FILES["uploadedfile"]["type"] == "image/jpeg") || ($_FILES["uploadedfile"]["type"] == "image/jpeg") || ($_FILES["uploadedfile"]["type"] == "image/jpg") || ($_FILES["uploadedfile"]["type"] == "image/pjpeg") || ($_FILES["uploadedfile"]["type"] == "image/x-png") || ($_FILES["uploadedfile"]["type"] == "image/gif") || ($_FILES["uploadedfile"]["type"] == "image/png") || ($_FILES["uploadedfile"]["type"] == "application/msword") || ($_FILES["uploadedfile"]["type"] == "text/plain") || ($_FILES["uploadedfile"]["type"] == "application/vnd.openxmlformats-officedocument.wordprocessingml.document") || ($_FILES["uploadedfile"]["type"] == "application/pdf") || ($_FILES["uploadedfile"]["type"] == "application/x-rar-compressed") || ($_FILES["uploadedfile"]["type"] == "application/x-zip-compressed") || ($_FILES["uploadedfile"]["type"] == "application/zip") || ($_FILES["uploadedfile"]["type"] == "multipart/x-zip") || ($_FILES["uploadedfile"]["type"] == "application/x-compressed") || ($_FILES["uploadedfile"]["type"] == "application/octet-stream")) && ($_FILES["uploadedfile"]["size"] < 5242880) // Max size is 5MB && in_array($extension, $allowedExts)) { move_uploaded_file($_FILES["uploadedfile"]["tmp_name"], $uploaded ); echo '<a target="_blank" href="'.$uploaded.'">click</a>'; // If has been uploaded file echo '<h3>'.$uploaded.'</h3>'; } if($_FILES["uploadedfile"]["error"] > 0){ echo '<h3>Please choose file to upload it!</h3>'; // If you don't choose file } elseif(!in_array($extension, $allowedExts)){ echo '<h3>This extension is not allowed!</h3>'; // If you choose file not allowed } elseif($_FILES["uploadedfile"]["size"] > 5242880){ echo "Big size!"; // If you choose big file } ?> if you have solution, please edit my php code and paste your solution code! Thanks.

    Read the article

  • sed multiline pygmentize

    - by dasickis
    I would like to take the html piece and pass it to pygmentize to colorize it accordingly. I'm wondering how I could use sed or some other cli tool to get that accomplished. I tried a bunch of sed one-liners and tried to use the following SO questions: Sed multiline replacement question Using or in multiline sed replacement sed or awk multiline replace I have the following log: 2012-03-26 18:04:27,385 9372 [main] ERROR web.commons.exception.ServiceInvocationException - Response from server cannot be decoded to JSON, responsePayload = <html> <head> <meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1"/> <title>Error 404 Not Found</title> </head> <body><h2>HTTP ERROR 404</h2> <p>Problem accessing jetty-url. Reason: <pre> Not Found</pre></p><hr /><i><small>Powered by Jetty://</small></i><br/> <br/> <br/> <br/> <br/> <br/> <br/> <br/> <br/> <br/> <br/> <br/> <br/> <br/> <br/> <br/> <br/> <br/> <br/> <br/> </body> </html> org.codehaus.jackson.JsonParseException: Unexpected character ('<' (code 60)): expected a valid value (number, String, array, object, 'true', 'false' or 'null') at [Source: java.io.StringReader@369133f6; line: 1, column: 2] UPDATE I'm adding this to a longer command: mvn -U test | (while read line; do echo ${line} | sed -e "s/.*ERROR.*/`echo -e '\e[91m&\e[0m'`/g" -e "s/.*\(WARN|INFO\).*/`echo -e '\e[93m&\e[0m'`/g"; done)

    Read the article

  • How to facebook getuser() after login with javascript SDK

    - by user1848205
    So I have to ask for extended permission by clicking the enter button, but after the login is necessary to refresh the page in order to display the app. Here's my code: <?php require 'facebook.php'; $facebook = new Facebook(array( 'appId' => '< THE APPID >', 'secret' => '< THE SECRET >', 'cookie' => true, )); $user = $facebook->getUser(); if ($user) { try { $user_profile = $facebook->api('/me'); } catch (FacebookApiException $e) { error_log($e); $user = null; } } ?> <body> <div id="fb-root"></div> <script> window.fbAsyncInit = function() { FB.init({ appId : '< THE APPID >', status : true, cookie : true, xfbml : true }); // Additional initialization code such as adding Event Listeners goes here $('#btn-enter').click(function(){ login(); }); }; (function(d){ var js, id = 'facebook-jssdk', ref = d.getElementsByTagName('script')[0]; if (d.getElementById(id)) {return;} js = d.createElement('script'); js.id = id; js.async = true; js.src = "//connect.facebook.net/en_US/all.js"; ref.parentNode.insertBefore(js, ref); }(document)); function login() { FB.login(function(response) { if (response.authResponse) { // connected } else { // cancelled } //}); }, {scope: 'read_friendlists,friends_photos,publish_stream'}); } </script> <?php if ($user): ?> <!--Here is my APP--> <?php else: ?> <a id="btn-enter">Enter</a> <?php endif ?> Is there a better way to do this ? What works for me is: function login() { FB.login(function(response) { if (response.authResponse) { top.location.href='https://the_app_url'; } else { } //}); }, {scope: 'read_friendlists,friends_photos,publish_stream'}); } But this causes the entire page to refresh and is not 'elegant' per se...

    Read the article

  • add space to every word's end in a string in C

    - by hlx98007
    Here I have a string: *line = "123 567 890 "; with 2 spaces at the end. I wish to add those 2 spaces to 3's end and 7's end to make it like this: "123 567 890" I was trying to achieve the following steps: parse the string into words by words list (array of strings). From upstream function I will get values of variables word_count, *line and remain. concatenate them with a space at the end. add space distributively, with left to right priority, so when a fair division cannot be done, the second to last word's end will have (no. of spaces) spaces, the previous ones will get (spaces + 1) spaces. concatenate everything together to make it a new *line. Here is a part of my faulty code: int add_space(char *line, int remain, int word_count) { if (remain == 0.0) return 0; // Don't need to operate. int ret; char arr[word_count][line_width]; memset(arr, 0, word_count * line_width * sizeof(char)); char *blank = calloc(line_width, sizeof(char)); if (blank == NULL) { fprintf(stderr, "calloc for arr error!\n"); return -1; } for (int i = 0; i < word_count; i++) { ret = sscanf(line, "%s", arr[i]); // gdb shows somehow it won't read in. if (ret != 1) { fprintf(stderr, "Error occured!\n"); return -1; } arr[i] = strcat(arr[i], " "); // won't compile. } size_t spaces = remain / (word_count * 1.0); memset(blank, ' ', spaces + 1); for (int i = 0; i < word_count - 1; i++) { arr[0] = strcat(arr[i], blank); // won't compile. } memset(blank, ' ', spaces); arr[word_count-1] = strcat(arr[word_count-1], blank); for (int i = 1; i < word_count; i++) { arr[0] = strcat(arr[0], arr[i]); } free(blank); return 0; } It is not working, could you help me find the parts that do not work and fix them please? Thank you guys.

    Read the article

  • PHP getting Twitter API JSON file contents without OAuth (Almost have it)

    - by DexCurl
    Hey guys, I have this script working fine with OAuth, but I accidentally nuked my 350 API hits with a stupid while statement :( I'm trying to get data from the Twitter API without OAuth, I can't figure it out (still pretty new), heres what I have <html> <body> <center> <hr /> <br /> <table border="1"> <tr><td>ScreenName</td><td>Followed back?</td></tr> <?php //twitter oauth deets $consumerKey = 'x'; $consumerSecret = 'x'; $oAuthToken = 'x'; $oAuthSecret = 'x'; // Create Twitter API objsect require_once("twitteroauth.php"); $oauth = new TwitterOAuth($consumerKey, $consumerSecret, $oAuthToken, $oAuthSecret); //get home timeline tweets and it is stored as an array $youfollow = $oauth->get('http://api.twitter.com/1/friends/ids.json?screen_name=lccountdown'); $i = 0; //start loop to print our results cutely in a table while ($i <= 20){ $youfollowid = $youfollow[$i]; $resolve = "http://api.twitter.com/1/friendships/exists.json?user_a=".$youfollow[$i]."&user_b=jwhelton"; $followbacktest = $oauth->get($resolve); //$homedate= $hometimeline[$i]->created_at; //$homescreenname = $hometimeline[$i]->user->screen_name; echo "<tr><td>".$youfollowid."</td><td>".$followbacktest."</td></tr>"; $i++; } ?> </table> </center> </body> </html> Neither of the two Twitter functions require authentication, so how can I get the same results? Thanks guys, Dex

    Read the article

  • How to set alternate row color for an iterated table in php?

    - by chandru_cp
    I am using php and i am iterating a table with a result array ... I want to add row color and alternate row color to it.... How to do so? Any suggestion... <table id="chkbox" cellpadding="0" cellspacing="2" width="100%" class="table_Style_Border"> <tr> <td style="width:150px" class="grid_header" align="center">RackName</td> <td style="width:150px" class="grid_header" align="center">LibraryName</td> <td style="width:200px" class="grid_header" align="center">LibrarianName</td> <td style="width:200px" class="grid_header" align="center">Location</td> <td style="width:1%" class="grid_header"></td> </tr> <? if(isset($comment)) { echo '<tr> <td class=table_label colspan=5>'.$comment.'</td></tr>'; } ?> <?php foreach($rackData as $row) { ?> <tr> <td align="left" class="table_label"> <?=$row['rack_name']?> </td> <td align="left" class="table_label"> <?=$row['library_name']?> </td> <td align="center" class="table_label"> <?=$row['librarian']?> </td> <td align="center" class="table_label"> <?=$row['location']?> </td> <td align="center"> <input type="checkbox" name="group" id="group" value="<?=$row['rack_id']?>" onclick="display(this);" > </td> </tr> <? } ?> <table>

    Read the article

  • Memory Management iOS dev app doesn't work after a few detail items

    - by user1434846
    I am working on a project with a tableView controller and the detail views contains CMMotionManager.When i open 5 or 6 detailViews all goes well,but after a while the app goes slow and finally crashes.On instruments the only leak is on main.m , also i must say that I'm using ARC and i can't dealloc or realese the instances. Here is the code: First the table view: - (void)viewDidLoad { [super viewDidLoad]; // Do any additional setup after loading the view, typically from a nib. self.title = @"Movement";//Master View Controller title bar UIImage *image = [UIImage imageNamed:@"jg_navibar.png"]; [self.navigationController.navigationBar setBackgroundImage:image forBarMetrics:UIBarMetricsDefault]; //Init the array with data bodypartsMutableArray = [NSMutableArray arrayWithCapacity:26]; BodypartData *part1 = [[BodypartData alloc] init]; part1.bodypartname = @"Shoulder"; part1.movementname = @"Flexion"; part1.fullimageStartingPosition=[UIImage imageNamed:@"2_shoulder_flexion_end_position.jpg"]; part1.fullimageEndedPosition=[UIImage imageNamed:@"2_shoulder_flexion_end_position.jpg"]; part1.thumbimage=[UIImage imageNamed:@"1_shoulder_flexion_landmarks_thumb.jpg"]; [bodypartsMutableArray addObject:part1]; ......... } then the cell: - (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath { UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:@"MyBasicCell"]; BodypartData *part = [self.bodypartsMutableArray objectAtIndex:indexPath.row]; cell.textLabel.text =[NSString stringWithFormat:part.movementname]; cell.detailTextLabel.text =[NSString stringWithFormat:part.bodypartname]; cell.imageView.image =part.thumbimage; return cell; } and the the detailViewdid load: - (void)viewDidLoad { [super viewDidLoad]; // Do any additional setup after loading the view, typically from a nib. // Init motionManager object and set the Update Interval _motionManager = [[CMMotionManager alloc]init]; _motionManager.deviceMotionUpdateInterval=1/60; //60 Hz [_motionManager startGyroUpdates]; if (_motionManager.gyroAvailable) { _motionManager.gyroUpdateInterval = 1.0/60.0; [_motionManager startDeviceMotionUpdatesToQueue:[NSOperationQueue currentQueue] withHandler: ^(CMDeviceMotion *motion, NSError *error) { CMAttitude *attitude = motion.attitude; //Calculation with rotationMatrix m11 = [NSString stringWithFormat:@"%.02f", attitude.rotationMatrix.m11]; m12 = [NSString stringWithFormat:@"%.02f", attitude.rotationMatrix.m12]; m13 = [NSString stringWithFormat:@"%.02f", attitude.rotationMatrix.m13]; ......... }

    Read the article

  • Are comonads a good fit for modeling the Wumpus world?

    - by Tim Stewart
    I'm trying to find some practical applications of a comonad and I thought I'd try to see if I could represent the classical Wumpus world as a comonad. I'd like to use this code to allow the Wumpus to move left and right through the world and clean up dirty tiles and avoid pits. It seems that the only comonad function that's useful is extract (to get the current tile) and that moving around and cleaning tiles would not use be able to make use of extend or duplicate. I'm not sure comonads are a good fit but I've seen a talk (Dominic Orchard: A Notation for Comonads) where comonads were used to model a cursor in a two-dimensional matrix. If a comonad is a good way of representing the Wumpus world, could you please show where my code is wrong? If it's wrong, could you please suggest a simple application of comonads? module Wumpus where -- Incomplete model of a world inhabited by a Wumpus who likes a nice -- tidy world but does not like falling in pits. import Control.Comonad -- The Wumpus world is made up of tiles that can be in one of three -- states. data Tile = Clean | Dirty | Pit deriving (Show, Eq) -- The Wumpus world is a one dimensional array partitioned into three -- values: the tiles to the left of the Wumpus, the tile occupied by -- the Wumpus, and the tiles to the right of the Wumpus. data World a = World [a] a [a] deriving (Show, Eq) -- Applies a function to every tile in the world instance Functor World where fmap f (World as b cs) = World (fmap f as) (f b) (fmap f cs) -- The Wumpus world is a Comonad instance Comonad World where -- get the part of the world the Wumpus currently occupies extract (World _ b _) = b -- not sure what this means in the Wumpus world. This type checks -- but does not make sense to me. extend f w@(World as b cs) = World (map world as) (f w) (map world cs) where world v = f (World [] v []) -- returns a world in which the Wumpus has either 1) moved one tile to -- the left or 2) stayed in the same place if the Wumpus could not move -- to the left. moveLeft :: World a -> World a moveLeft w@(World [] _ _) = w moveLeft (World as b cs) = World (init as) (last as) (b:cs) -- returns a world in which the Wumpus has either 1) moved one tile to -- the right or 2) stayed in the same place if the Wumpus could not move -- to the right. moveRight :: World a -> World a moveRight w@(World _ _ []) = w moveRight (World as b cs) = World (as ++ [b]) (head cs) (tail cs) initWorld = World [Dirty, Clean, Dirty] Dirty [Clean, Dirty, Pit] -- cleans the current tile cleanTile :: Tile -> Tile cleanTile Dirty = Clean cleanTile t = t Thanks!

    Read the article

  • c# video equivalent to image.fromstream? Or changing the scope of the following script to allow vide

    - by Daniel
    The following is a part of an upload class in a c# script. I'm a php programmer, I've never messed with c# much but I'm trying to learn. This upload script will not handle anything except images, I need to adapt this class to handle other types of media also, or rewrite it all together. If I'm correct, I realize that using (Image image = Image.FromStream(file.InputStream)) basically says that the scope of the following is Image, only an image can be used or the object is discarded? And also that the variable image is being created from an Image from the file stream, which I understand to be, like... the $_FILES array in php? I dunno, I don't really care about making thumbnails right now either way, so if this can be taken out and still process the upload I'm totally cool with that, I just haven't had any luck getting this thing to take anything but images, even when commenting out that whole part of the class... protected void Page_Load(object sender, EventArgs e) { string dir = Path.Combine(Request.PhysicalApplicationPath, "files"); if (Request.Files.Count == 0) { // No files were posted Response.StatusCode = 500; } else { try { // Only one file at a time is posted HttpPostedFile file = Request.Files[0]; // Size limit 100MB if (file.ContentLength > 102400000) { // File too large Response.StatusCode = 500; } else { string id = Request.QueryString["userId"]; string[] folders = userDir(id); foreach (string folder in folders) { dir = Path.Combine(dir, folder); if (!Directory.Exists(dir)) Directory.CreateDirectory(dir); } string path = Path.Combine(dir, String.Concat(Request.QueryString["batchId"], "_", file.FileName)); file.SaveAs(path); // Create thumbnail int dot = path.LastIndexOf('.'); string thumbpath = String.Concat(path.Substring(0, dot), "_thumb", path.Substring(dot)); using (Image image = Image.FromStream(file.InputStream)) { // Find the ratio that will create maximum height or width of 100px. double ratio = Math.Max(image.Width / 100.0, image.Height / 100.0); using (Image thumb = new Bitmap(image, new Size((int)Math.Round(image.Width / ratio), (int)Math.Round(image.Height / ratio)))) { using (Graphics graphic = Graphics.FromImage(thumb)) { // Make sure thumbnail is not crappy graphic.SmoothingMode = SmoothingMode.HighQuality; graphic.InterpolationMode = InterpolationMode.High; graphic.CompositingQuality = CompositingQuality.HighQuality; // JPEG ImageCodecInfo codec = ImageCodecInfo.GetImageEncoders()[1]; // 90% quality EncoderParameters encode = new EncoderParameters(1); encode.Param[0] = new EncoderParameter(Encoder.Quality, 90L); // Resize graphic.DrawImage(image, new Rectangle(0, 0, thumb.Width, thumb.Height)); // Save thumb.Save(thumbpath, codec, encode); } } } // Success Response.StatusCode = 200; } } catch { // Something went wrong Response.StatusCode = 500; } } }

    Read the article

  • Access multiple objects/arrays in JSON in jQuery $.each

    - by user2880254
    I am trying to build a simple page to view messages saved in a mysql db via JSON and jQuery. My JSON IS {"unread_msgs":[{"id":"6","title":"33333","user1":"19","timestamp":"1383747146","client_id":"Generic"},{"id":"5","title":"42142","user1":"19","timestamp":"1383740864","client_id":"Generic"}],"read_msgs":[{"id":"4","title":"test to addnrow","user1":"19","timestamp":"1383676647","client_id":"Generic"},{"id":"2","title":"kll","user1":"19","timestamp":"1383675548","client_id":"Generic"},{"id":"1","title":"jkjljklj","user1":"19","timestamp":"1382539982","client_id":"Generic"}],"urm_t":2,"rm_t":3} My JS <script type="text/javascript"> function GetClientMsgs () { $.post("assets/server/client_msgs.php",{ client_id:local_client_id } ,function(data) { var MsgData = $.parseJSON(data); console.log("Msg json data parsed"); $.each(MsgData, function(key, value) { console.log(value); $('#unread_row').append('<td><a href="#read_pm" onClick="ReadMsg('+value.unread_msgs.id+'); return false;">'+value.unread_msgs.title+'</a></td><td><a href="#profile">'+value.unread_msgs.studioname+'</a></td><td>'+value.unread_msgs.timestamp+'</td><td><a href="#delete_msg" onClick="DeleteMsg('value.unread_msgs.id+'); return false;">X</a></td>'); $('#read_row').append('<td><a href="#read_pm" onClick="ReadMsg('+value.read_msgs.id+'); return false;">'+value.read_msgs.title+'</a></td><td><a href="#profile">'+value.read_msgs.studioname+'</a></td><td>'+value.read_msgs.timestamp+'</td><td><a href="#delete_msg" onClick="DeleteMsg('+value.read_msgs.id+'); return false;">X</a></td>'); }); }); } </script> PHP $msgs = array('unread_msgs' => $dn1s, 'read_msgs' => $dn2s, 'urm_t' => $unread_msgs, 'rm_t' => $read_msgs); $json = json_encode($msgs); I am trying to post values returned such as unread_msgs.title or .id and am not able to access any of the objects. I have searched on here and could not find something specific to my structure. Thanks alot.

    Read the article

  • DataGridView cells not editable when using an outside thread call

    - by joslinm
    Hi, I'm not able to edit my datagridview cells when a number of identical calls takes place on another thread. Here's the situation: Dataset table is created in the main window The program receives in files and processes them on a background thread in class TorrentBuilder : BackgroundWorker creating an array objects of another class Torrent My program receives those objects from the BW result and adds them into the dataset The above happens either on my main window thread or in another thread: I have a separate thread watching a folder for files to come in, and when they do come in, they proceed to call TorrentBuilder.RunWorkerAsynch() from that thread, receive the result, and call an outside class that adds the Torrent objects into the table. When the files are received by the latter thread, the datagridview isn't editable. All of the values come up properly into the datagridview, but when I click on a cell to edit it: I can write letters and everything, but when I click out of it, it immediately reverts back to its original value. If I restart the program, I can edit the same cells just fine. If the values are freshly added from the main window thread, I can edit the cells just fine. The outside thread is called from my main window thread, and sits there in the background. I don't believe it to be ReadOnly because I would have gotten an exception. Here's some code: From my main window class: private void dataGridView_DragDrop(object sender, DragEventArgs e) { ArrayList al = new ArrayList(); string[] files = (string[])e.Data.GetData(DataFormats.FileDrop); foreach (string file in files) { string extension = Path.GetExtension(file); if (Path.GetExtension(file).Equals(".zip") || Path.GetExtension(file).Equals(".rar")) { foreach (string unzipped in dh.UnzipFile(file)) al.Add(unzipped); } else if (Path.GetExtension(file).Equals(".torrent")) { al.Add(file); } } dataGridViewProgressBar.Visible = true; tb.RunWorkerCompleted += new RunWorkerCompletedEventHandler(tb_DragDropCompleted); tb.ProgressChanged += new ProgressChangedEventHandler(tb_DragDropProgress); tb.RunWorkerAsync() } void tb_DragDropCompleted(object sender, RunWorkerCompletedEventArgs e) { data.AddTorrents((Torrent[])e.Result); builder.Dispose(); dh.MoveProcessedFiles(data); dataGridViewProgressBar.Visible = false; } From my outside Thread while (autocheck) { if (torrentFiles != null) { builder.RunWorkerAsync(torrentFiles); while (builder.IsBusy) Thread.Sleep(500); } } void builder_RunWorkerCompleted(object sender, System.ComponentModel.RunWorkerCompletedEventArgs e) { data.AddTorrents((Torrent[])e.Result); builder.Dispose(); dh.MoveProcessedFiles(xml); data.Save(); //Save just does an `AcceptChanges()` and saves to a XML file }

    Read the article

  • PHP: csv generator creates extra field

    - by WhyKiki
    I'm coding a script that takes one csv file to transform it into another one. Basically, two foreach loops are used: one to iterate records and another to iterate fields. Certain fields (cno 25, 26, 44) for each record needs to be modified. The problem is that each modificatino creates an extra empty field, i.e. the code $colStr .= '"' . $col . '";'; works but not any of the code in the if statements. The code is: $rno = 0; foreach ($csvArray as $line) { $cno = 0; $colStr = ""; foreach ($line as $col) { if($rno>0 && $cno==25) { $stuff = array($csvArray[$rno][41], $csvArray[$rno][47], $csvArray[$rno][48], $csvArray[$rno][49]); foreach($stuff as &$value) { $value = preg_replace('/[^0-9]/', '', $value); } sort($stuff, SORT_NUMERIC); // Causes bug! $colStr .= '"' . $stuff[0] . '";'; } if($rno>0 && $cno==26) { $urls = ""; for($i = 55; $i<=62; $i++) { $urls .= "Images: " . $csvArray[$rno][$i] . " | "; } $urls .= "Some text: " . $csvArray[$rno][43] . " | "; // Causes bug! $colStr .= '"' . $urls . '";'; } if($rno>0 && $cno==44) { $colStr .= '"' . $_POST['location'][$rno] . '";'; } if($rno>0 && $cno==54) { $objType = $col; $objType = preg_replace('/foobar/i', '123', $objType); // Causes bug! $colStr .= '"' . $objType . '";'; } else { // This is ok, though $colStr .= '"' . $col . '";'; } $cno++; } $colStr = preg_replace('/;$/', '', $colStr); $colStr .= "\n"; fwrite($outputFile, $colStr); $rno++; } fclose($outputFile);

    Read the article

  • JQuery Ajax Updating MySQL Database, But Not Running Success Function

    - by myrmidon16
    I am currently using the JQuery ajax function to call an exterior PHP file, in which I select and add data in a database. Once this is done, I run a success function in JavaScript. What's weird is that the database is updating successfully when ajax is called, however the success function is not running. Here is my code: <!DOCTYPE html> <head> <script type="text/javascript" src="jquery-1.6.4.js"></script> </head> <body> <div onclick="addtask();" style="width:400px; height:200px; background:#000000;"></div> <script> function addtask() { var tid = (Math.floor(Math.random() * 3)) + 1; var tsk = (Math.floor(Math.random() * 10)) + 1; if(tsk !== 1) { $.ajax({ type: "POST", url: "taskcheck.php", dataType: "json", data: {taskid:tid}, success: function(task) {alert(task.name);} }); } } </script> </body> </html> And the PHP file: session_start(); $connect = mysql_connect('x', 'x', 'x') or die('Not Connecting'); mysql_select_db('x') or die ('No Database Selected'); $task = $_REQUEST['taskid']; $uid = $_SESSION['user_id']; $q = "SELECT task_id, taskname FROM tasks WHERE task_id=" .$task. " LIMIT 1"; $gettask = mysql_fetch_assoc(mysql_query($q)); $q = "INSERT INTO user_tasks (ut_id, user_id, task_id, taskstatus, taskactive) VALUES (null, " .$uid. ", '{$gettask['task_id']}', 0, 1)"; $puttask = mysql_fetch_assoc(mysql_query($q)); $json = array( "name" => $gettask['taskname'] ); $output = json_encode($json); echo $output; Let me know if you have any questions or comments, thanks.

    Read the article

  • Counting number of searches

    - by shinjuo
    I am trying to figure out how to get the total number of tests each search makes in this algorithm. I am not sure how I can pass that information back from this algorithm though. I need to count how many times while runs and then pass that number back into an array to be added together and determine the average number of test. main.c #include <stdio.h> #include <stdlib.h> #include <time.h> #include <stdbool.h> #include "percentage.h" #include "sequentialSearch.h" #define searchAmount 100 int main(int argc, char *argv[]) { int numbers[100]; int searches[searchAmount]; int i; int where; int searchSuccess; int searchUnsuccess; int percent; srand(time(NULL)); for (i = 0; i < 100; i++){ numbers[i] = rand() % 200; } for (i = 0; i < searchAmount; i++){ searches[i] = rand() % 200; } searchUnsuccess = 0; searchSuccess = 0; for(i = 0; i < searchAmount; i++){ if(seqSearch(numbers, 100, searches[i], &where)){ searchSuccess++; }else{ searchUnsuccess++; } } percent = percentRate(searchSuccess, searchAmount); printf("Total number of searches: %d\n", searchAmount); printf("Total successful searches: %d\n", searchSuccess); printf("Success Rate: %d%%\n", percent); system("PAUSE"); return 0; } sequentialSearch.h bool seqSearch (int list[], int last, int target, int* locn){ int looker; looker = 0; while(looker < last && target != list[looker]){ looker++; } *locn = looker; return(target == list[looker]); }

    Read the article

  • Adding a web address to a <a href="value">

    - by Michael Robinson
    I have an upload script that write a index.html file, I modified it to mail me the results, however the point to the root, since the email isn't in the root, the image doesn't load. How do I append the code to add "http://www.home.html/uploaded" prior to the ". $value ." so that the images show up in the email. Here is portion of PHP that assigns the images to a $result: // Process value of Imagedata field, this is JPEG-files array foreach ($_FILES[Imagedata][name] as $key => $value) { $uploadfile = $destination_dir . basename($_FILES[Imagedata][name][$key]); if (move_uploaded_file($_FILES['Imagedata']['tmp_name'][$key], $uploadfile)) { $result .= "File uploaded: <a href='". $value . "'>" . $value . "</a><br>"; } } // $result .= "<br>"; Here is what I'm now receiving in the email, : <!doctype html public "-//w3c//dtd html 4.0 transitional//en"> <html> <head> <meta http-equiv="Content-Type" content="text/html; charset=utf-8"> <title>Upload results</title> </head> <body> AdditionalStringVariable: pass additional data here<br><a> href='gallery_grannylovesthis_l.jpg'><img border = '0' src='QIU_thumb_gallery_grannylovesthis_l.jpg'/></a><br><br><br>File uploaded: <a href='gallery_grannylovesthis_l.jpg'>gallery_grannylovesthis_l.jpg</a><br><br> GlobalControlData: PHOTO_VISIBILITY : 2<br> GlobalControlData: PHOTO_DESCR : Requiredtest<br> GlobalControlData: PHOTO_TITLE : Requiredtest<br><br>gallery_grannylovesthis_l.png<br> control: , value: <br> </body> </html> Thanks in advance for any guidance...I have a feeling it's something simple.

    Read the article

  • index seems to be out of sync for jquery .keydown and .click methods

    - by Growler
    I'd like to navigate images using both keyboard and mouse (clicking left and right arrow images). I'm using Jquery to do this, but the shared imgIndex seems to be off from the .keydown function and the .click function... Whenever .keydown function -- or ++ the imgIndex, isn't that changed index also used in the click function? So shouldn't they always be on the same index? keydown function: <script type="text/javascript"> var imgArray = [<?php echo implode(',', getImages($site)) ?>]; $(document).ready(function() { var img = document.getElementById("showimg"); img.src = imgArray[<?php echo $imgid ?>]; var imgIndex = <?php echo $imgid ?>; alert(imgIndex); $(document).keydown(function (e) { var key = e.which; var rightarrow = 39; var leftarrow = 37; var random = 82; if (key == rightarrow) { imgIndex++; if (imgIndex > imgArray.length-1) { imgIndex = 0; } img.src = imgArray[imgIndex]; } if (key == leftarrow) { if (imgIndex == 0) { imgIndex = imgArray.length; } img.src = imgArray[--imgIndex]; } }); click function: Connected to left and right clickable images $("#next").click(function() { imgIndex++; if (imgIndex > imgArray.length-1) { imgIndex = 0; } img.src = imgArray[imgIndex]; }); $("#prev").click(function() { if (imgIndex == 0) { imgIndex = imgArray.length; } img.src = imgArray[--imgIndex]; }); }); Just so you have some visibility into the getImages php function: <?php function getImages($siteParam) { include 'dbconnect.php'; if ($siteParam == 'artwork') { $table = "artwork"; } else { $table = "comics"; } $catResult = $mysqli->query("SELECT id, title, path, thumb, views, catidFK FROM $table"); $img = array(); while($row = $catResult->fetch_assoc()) { $img[] = "'" . $row['path'] . "'"; } return $img; } ?> Much appreciated! Snapshot of where the script is on "view image.php"

    Read the article

  • upload form only works in Firefox when uploading ASCII .stl 3D files

    - by NathanPDX
    uploadform.html and upload_file.php (below) works fine in Firefox but fails in Chrome, IE, and Safari when uploading ASCII .stl 3D files. Error message is "Invalid file" and problem occurs with multiple computers and multiple .stl files. When I modify the code to support other file types like JPG and PDF it allows those file types in all three web browsers. Also, Firefox only allows the .stl upload if I include application/octet-stream in the mime types section. Why doesn't this work outside of Firefox? uploadform.html: <!doctype html> <html> <body> <form action="upload_file.php" method="post" enctype="multipart/form-data"> <label for="file">Filename:</label> <input type="file" name="file" id="file" /> <br /> <input type="submit" name="submit" value="Submit" /> </form> </body> </html> upload_file.php: <!doctype html> <html> <body> <?php $allowedExts = array("stl"); $extension = end(explode(".", $_FILES["file"]["name"])); if ( ( ($_FILES["file"]["type"] == "application/sla") || ($_FILES["file"]["type"] == "application/octet-stream") || ($_FILES["file"]["type"] == "text/plain") || ($_FILES["file"]["type"] == "application/unknown") ) && ($_FILES["file"]["size"] < 2000000) && in_array($extension, $allowedExts) ) { if ($_FILES["file"]["error"] > 0) { echo "Return Code: " . $_FILES["file"]["error"] . "<br />"; } else { echo "Upload: " . $_FILES["file"]["name"] . "<br />"; echo "Size: " . ($_FILES["file"]["size"] /1024) . " KB<br />"; if (file_exists("upload/" . $_FILES["file"]["name"])) { echo $_FILES["file"]["name"] . " already exists. "; } else { move_uploaded_file($_FILES["file"]["tmp_name"], "upload/" . $_FILES["file"]["name"]); echo "successful upload"; } } } else { echo "Invalid file"; } ?> </body> </html>

    Read the article

  • Best way to have common class shared by both C++ and Ruby?

    - by shuttle87
    I am currently working on a project where a team of us are designing a game, all of us are proficient in ruby and some (but not all) of us are proficient in c++. Initially we made the backend in ruby but we ported it to c++ for more speed. The c++ port of the backend has exactly the same features and algorithms as the original ruby code. However we still have a bunch of code in ruby that does useful things but we want it to now get the data from the c++ classes. Our first thought was that we could save some of the data structures in something like XML or redis and call that, but some of the developers don't like that idea. We don't need anything particularly complex data structures to be passed between the different parts of the code, just tuples, strings and ints. Is there any way of integrating the ruby code so that it can call the c++ stuff natively? Will we need to embed code? Will we have to make a ruby extension? If so are there any good resources/tutorials you could suggest? For example say we have this code in the c++ backend: class The_game{ private: bool printinfo; //print the player diagnostic info at the beginning if true int numplayers; std::vector<Player*> players; string current_action; int action_is_on; // the index of the player in the players array that the action is now on //more code here public: Table(std::vector<Player *> in_players, std::vector<Statistics *> player_stats ,const int in_numplayers); ~Table(); void play_game(); History actions_history; }; class History{ private: int action_sequence_number; std::vector<Action*> hand_actions; public: void print_history(); void add_action(Action* the_action_to_be_added); int get_action_sequence_number(){ return action_sequence_number;} bool history_actions_are_equal(); int last_action_size(int street,int number_of_actions_ago); History(); ~History(); }; Is there any way to natively call something in the actions_history via The_game object in ruby? (The objects in the original ruby code all had the same names and functionality) By this I mean: class MyRubyClass def method1(arg1) puts arg1 self.f() # ... but still available puts cpp_method.the_current_game.actions_history.get_action_sequence_number() end # Constructor: def initialize(arg) puts "In constructor with arg #{arg}" #get the c++ object here and call it cpp_method end end Is this possible? Any advice or suggestions are appreciated.

    Read the article

  • PHP+GD creating random black thumbnails

    - by rroberto
    Hello, This function is creating some random black images like.. 10% of the time, is not much, but.. you know.. shouldnt be happening. class ImgResizer { private $originalFile = ''; public function __construct($originalFile = '') { $this -> originalFile = $originalFile; } public function resize($newWidth, $targetFile) { if (empty($newWidth) || empty($targetFile)) { return false; } $src = imagecreatefromjpeg($this -> originalFile); list($width, $height) = getimagesize($this -> originalFile); $newHeight = ($height / $width) * $newWidth; if ($newHeight<'335') { //$newHeight='335'; } $tmp = imagecreatetruecolor($newWidth, $newHeight); #$tmp = imagecreate($newWidth, $newHeight); imagecopyresampled($tmp, $src, 0, 0, 0, 0, $newWidth, $newHeight, $width, $height); if (file_exists($targetFile)) { unlink($targetFile); } imagejpeg($tmp, $targetFile, 85); // 85 is my choice, make it between 0 – 100 for output image quality with 100 being the most luxurious } } no errors given in error_log. Here is gd_info(): Array( [GD Version] => bundled (2.0.34 compatible) [FreeType Support] => [T1Lib Support] => [GIF Read Support] => 1 [GIF Create Support] => 1 [JPG Support] => 1 [PNG Support] => 1 [WBMP Support] => 1 [XPM Support] => 1 [XBM Support] => 1 [JIS-mapped Japanese Font Support] => )1 server is linux. function is being called like this: assuming $imagen is the actual source image, and $imagendestino is the path and filename of the new thumbnail. if (!file_exists($imagendestino)) { $work = new ImgResizer($imagen); $work -> resize(475, $imagendestino); } Thanks in advance!

    Read the article

< Previous Page | 571 572 573 574 575 576 577 578 579 580 581 582  | Next Page >