Search Results

Search found 16560 results on 663 pages for 'far'.

Page 575/663 | < Previous Page | 571 572 573 574 575 576 577 578 579 580 581 582  | Next Page >

• GPO Software Uninstall Not Taking Place

  - by burmat

  I am having some trouble with my software GPO's and can't seem to find any answers using Google. I successfully deployed software using my policy but when I delete another, the uninstallation of the software does not take place. What I did: Deployed software using a GPO, used gpupdate /force on the workstation to update, reboot, and install the software Deleted another software installation by: Right-Click All Tasks Remove 'Immediately uninstall the software from users and computers' From there, I did another gpupdate /force to try and get the GPO to refresh and uninstall the software on the workstation. This did not work. I then forced replication between my domain controllers and ran another gpupdate /force on the workstation and this did not uninstall the software. There are not error logs or indications that the uninstall is being triggered when I go into the event viewer, and I know for a fact that the policy is working in other aspects. So my questions is: Where do I look next to find the answer as to why GPO software deployments are working but un-installations are not, based off of what I have already tried? Thank you in advance. UPDATE: After using gpresult /z, there is no indication of a pending un-installation or removal of software. Under the section entitled "Software Installations", the software I am trying to uninstall is not listed. There is no other indication that the software I am trying to uninstall even exists. I also turned on RSoP logging and did (yet another) gpupdate /force to yield no blatant results. There is no indication that an uninstall event was even triggered, let alone incapability or failure. Although I am sure I marked it to uninstall in case of two events (the falling out of the scope of management, as well as the removal of the entry), I am beginning to think the entry just never triggered something that should have been triggered. UPDATE #2: After troubleshooting this (frustrating) application assignment, I have chalked it up as a fluke. I have tested with other software to make sure that the uninstall of other application assignments is actually working, so I am assuming it is something related to the package directly. There is the possibility that my problem resides in something related to what @joeqwerty linked in a comment below but because I can't go back in time, I don't think I will be able to prove it. I will probably be running a script via another GPO to guarantee the un-installation of left over package installs. For now, Evan Anderson is getting the answer because of the debugging information I was able to put to good use. Thank you to everyone that helped contribute so far!

  Read the article

• Subversion - Retrieval of mergeinfo unsupported

  - by jamesthomson

  Hi, I've recently updated my Subversion package on Debian Etch to 1.5.1 via a back-port. I've gone through what I believe are all the appropriate steps but cannot for the life of me get past the following error message when I try to merge: Retrieval of mergeinfo unsupported by '.' The '.' isn't important as I get the same message whether I'm SSH'd on to the server or using TortoiseSVN through Windows. I'll take you through what I did to upgrade and test step by step: Update of Subversion Added the following line to /etc/apt/sources.list: deb http://www.backports.org/debian etch-backports main contrib non-free and then ran apt-get -s -t etch-backports install subversion Checked the version of the subversion installation Done this by running svnadmin --version and got the following output: svnadmin, version 1.5.1 (r32289) compiled Dec 11 2008, 18:10:14 Checked the client too using svn --version and got the following svn, version 1.5.1 (r32289) compiled Dec 11 2008, 18:10:14 Ok, so all looking good so far. Now I just need to upgrade the repository. After plenty of research, the most foolproof way to do this seemed to be to dump the repository and then load it again. So here's what I did: svnadmin dump /var/svn/repo > repo.dump rm -aR /var/svn/repo/* svnadmin create /var/svn/repo svnadmin load < repo.dump All that seemed to work fine. I then checked to see if the repository had been upgraded by looking at the contents of /var/svn/repo/db/format which gave: 3 layout sharded 1000 Again this indicated a Subversion 1.5 repository so all looking good. Now I try and do a merge using the Subversion client in Debian: svn mergeinfo https://mysvn/repo . and I get the following error: svn: Retrieval of mergeinfo unsupported by '.' I get the same error message whether I'm using the Debian shell on the same server or if I'm connecting via TortoiseSVN and a Windows box. If I browse to the repository using my web browser, the version number at the bottom reads: Powered by Subversion version 1.4.2 (r22196). In case it helps, the created date on mod_dav_svn.so is 2009-08-06 18:29 I just cannot figure out why I'm getting this message so any help pointing me in the right direction would be greatly appreciated. All the forum and mailing list posts that I found relating to this error were solved by doing an svnadmin upgrade, though I have actually tried that and still no joy. Thanks in advance, James.

  Read the article

• How do I parse file paths separated by a space in a string?

  - by user1130637

  Background: I am working in Automator on a wrapper to a command line utility. I need a way to separate an arbitrary number of file paths delimited by a single space from a single string, so that I may remove all but the first file path to pass to the program. Example input string: /Users/bobby/diddy dum/ding.mp4 /Users/jimmy/gone mia/come back jimmy.mp3 ... Desired output: /Users/bobby/diddy dum/ding.mp4 Part of the problem is the inflexibility on the Automator end of things. I'm using an Automator action which returns unescaped POSIX filepaths delimited by a space (or comma). This is unfortunate because: 1. I cannot ensure file/folder names will not contain either a space or comma, and 2. the only inadmissible character in Mac OS X filenames (as far as I can tell) is :. There are options which allow me to enclose the file paths in double or single quotes, or angle brackets. The program itself accepts the argument of the aforementioned input string, so there must be a way of separating the paths. I just do not have a keen enough eye to see how to do it with sed or awk. At first I thought I'll just use sed to replace every [space]/ with [newline]/ and then trim all but the first line, but that leaves the loophole open for folders whose names end with a space. If I use the comma delimiter, the same happens, just for a comma instead. If I encapsulate in double or single quotation marks, I am opening another can of worms for filenames with those characters. The image/link is the relevant part of my Automator workflow. -- UPDATE -- I was able to achieve what I wanted in a rather roundabout way. It's hardly elegant but here is working generalized code: path="/Users/bobby/diddy dum/ding.mp4 /Users/jimmy/gone mia/come back jimmy.mp3" # using colon because it's an inadmissible Mac OS X # filename character, perfect for separating # also, unlike [space], multiple colons do not collapse IFS=: # replace all spaces with colons colpath=$(echo "$path" | sed 's/ /:/g') # place words from colon-ized file path into array # e.g. three spaces -> three colons -> two empty words j=1 for word in $colpath do filearray[$j]="$word" j=$j+1 done # reconstruct file path word by word # after each addition, check file existence # if non-existent, re-add lost [space] and continue until found name="" for seg in "${filearray[@]}" do name="$name$seg" if [[ -f "$name" ]] then echo "$name" break fi name="$name " done All this trouble because the default IFS doesn't count "emptiness" between the spaces as words, but rather collapses them all.

  Read the article

• OpenSSH does not accept public key?

  - by Bob

  I've been trying to solve this for a while, but I'm admittedly quite stumped. I just started up a new server and was setting up OpenSSH to use key-based SSH logins, but I've run into quite a dilemma. All the guides are relatively similar, and I was following them closely (despite having done this once before). I triple checked my work to see if I would notice some obvious screw up - but nothing is apparent. As far as I can tell, I haven't done anything wrong (and I've checked very closely). If it's any help, on my end I'm using Cygwin and the server is running Ubuntu 12.04.1 LTS. Anyways, here is the output (I've removed/censored some parts for privacy (primarily anything with my name, website, or its IP address), but I can assure you that nothing is wrong there): $ ssh user@host -v OpenSSH_5.9p1, OpenSSL 0.9.8r 8 Feb 2011 debug1: Connecting to host [ipaddress] port 22. debug1: Connection established. debug1: identity file /home/user/.ssh/id_rsa type 1 debug1: identity file /home/user/.ssh/id_rsa-cert type -1 debug1: identity file /home/user/.ssh/id_dsa type -1 debug1: identity file /home/user/.ssh/id_dsa-cert type -1 debug1: identity file /home/user/.ssh/id_ecdsa type -1 debug1: identity file /home/user/.ssh/id_ecdsa-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.9p1 Debian-5ubuntu1 debug1: match: OpenSSH_5.9p1 Debian-5ubuntu1 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.9 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: sending SSH2_MSG_KEX_ECDH_INIT debug1: expecting SSH2_MSG_KEX_ECDH_REPLY debug1: Server host key: ECDSA 24:68:c3:d8:13:f8:61:94:f2:95:34:d1:e2:6d:e7:d7 debug1: Host 'host' is known and matches the ECDSA host key. debug1: Found key in /home/user/.ssh/known_hosts:2 debug1: ssh_ecdsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey debug1: Next authentication method: publickey debug1: Offering RSA public key: /home/user/.ssh/id_rsa debug1: Authentications that can continue: publickey debug1: Trying private key: /home/user/.ssh/id_dsa debug1: Trying private key: /home/user/.ssh/id_ecdsa debug1: No more authentication methods to try. Permission denied (publickey). What can I do to resolve my problem?

  Read the article

• Postmaster uses excessive CPU and Disk Writes

  - by wolfcastle

  using PostgreSQL 9.1.2 I'm seeing excessive CPU usage and large amounts of writes to disk from postmaster tasks. This happens even while my application is doing almost nothing (10s of inserts per MINUTE). There are a reasonable number of connections open however. I've been trying to determine what in my application is causing this. I'm pretty newb with postgresql, and haven't gotten anywhere so far. I've turned on some logging options in my config file, and looked at connections in the pg_stat_activity table, but they are all idle. Yet each connection consumes ~ 50% CPU, and is writing ~15M/s to disk (reading nothing). I'm basically using the stock postgresql.conf with very little tweaks. I'd appreciate any advice or pointers on what I can do to track this down. Here is a sample of what top/iotop is showing me: Cpu(s): 18.9%us, 14.4%sy, 0.0%ni, 53.4%id, 11.8%wa, 0.0%hi, 1.5%si, 0.0%st Mem: 32865916k total, 7263720k used, 25602196k free, 575608k buffers Swap: 16777208k total, 0k used, 16777208k free, 4464212k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 17057 postgres 20 0 236m 33m 13m R 45.0 0.1 73:48.78 postmaster 17188 postgres 20 0 219m 15m 11m R 42.3 0.0 61:45.57 postmaster 17963 postgres 20 0 219m 16m 11m R 42.3 0.1 27:15.01 postmaster 17084 postgres 20 0 219m 15m 11m S 41.7 0.0 63:13.64 postmaster 17964 postgres 20 0 219m 17m 12m R 41.7 0.1 27:23.28 postmaster 18688 postgres 20 0 219m 15m 11m R 41.3 0.0 63:46.81 postmaster 17088 postgres 20 0 226m 24m 12m R 41.0 0.1 64:39.63 postmaster 24767 postgres 20 0 219m 17m 12m R 41.0 0.1 24:39.24 postmaster 18660 postgres 20 0 219m 14m 9.9m S 40.7 0.0 60:51.52 postmaster 18664 postgres 20 0 218m 15m 11m S 40.7 0.0 61:39.61 postmaster 17962 postgres 20 0 222m 19m 11m S 40.3 0.1 11:48.79 postmaster 18671 postgres 20 0 219m 14m 9m S 39.4 0.0 60:53.21 postmaster 26168 postgres 20 0 219m 15m 10m S 38.4 0.0 59:04.55 postmaster Total DISK READ: 0.00 B/s | Total DISK WRITE: 195.97 M/s TID PRIO USER DISK READ DISK WRITE SWAPIN IO> COMMAND 17962 be/4 postgres 0.00 B/s 14.83 M/s 0.00 % 0.25 % postgres: aggw aggw [local] idle 17084 be/4 postgres 0.00 B/s 15.53 M/s 0.00 % 0.24 % postgres: aggw aggw [local] idle 17963 be/4 postgres 0.00 B/s 15.00 M/s 0.00 % 0.24 % postgres: aggw aggw [local] idle 17188 be/4 postgres 0.00 B/s 14.80 M/s 0.00 % 0.24 % postgres: aggw aggw [local] idle 17964 be/4 postgres 0.00 B/s 15.50 M/s 0.00 % 0.24 % postgres: aggw aggw [local] idle 18664 be/4 postgres 0.00 B/s 15.13 M/s 0.00 % 0.23 % postgres: aggw aggw [local] idle 17088 be/4 postgres 0.00 B/s 14.71 M/s 0.00 % 0.13 % postgres: aggw aggw [local] idle 18688 be/4 postgres 0.00 B/s 14.72 M/s 0.00 % 0.00 % postgres: aggw aggw [local] idle 24767 be/4 postgres 0.00 B/s 14.93 M/s 0.00 % 0.00 % postgres: aggw aggw [local] idle 18671 be/4 postgres 0.00 B/s 16.14 M/s 0.00 % 0.00 % postgres: aggw aggw [local] idle 17057 be/4 postgres 0.00 B/s 13.58 M/s 0.00 % 0.00 % postgres: aggw aggw [local] idle 26168 be/4 postgres 0.00 B/s 15.50 M/s 0.00 % 0.00 % postgres: aggw aggw [local] idle 18660 be/4 postgres 0.00 B/s 15.85 M/s 0.00 % 0.00 % postgres: aggw aggw [local] idle

  Read the article

• umount bind of stale NFS

  - by Paul Eisner

  i've got a problem removing mounts created with mount -o bind from a locally mounted NFS folder. Assume the following mount structure: NFS mounted directory: $ mount -o rw,soft,tcp,intr,timeo=10,retrans=2,retry=1 \ 10.20.0.1:/srv/source /srv/nfs-source Bound directory: $ mount -o bind /srv/nfs-source/sub1 /srv/bind-target/sub1 Which results in this mount map $ mount /dev/sda1 on / type ext3 (rw,errors=remount-ro) # ... 10.20.0.1:/srv/source on /srv/nfs-source type nfs (rw,soft,tcp,intr,timeo=10,retrans=2,retry=1,addr=10.20.0.100) /srv/nfs-source/sub1 on /srv/bind-target/sub1 type none (rw,bind) If the server (10.20.0.1) goes down (eg ifdown eth0), the handles become stale, which is expected. I can now un-mount the NFS mount with force $ umount -f /srv/nfs-source This takes some seconds, but works without any problems. However, i cannot un-mount the bound directory in /srv/bind-target/sub1. The forced umount results in: $ umount -f /srv/bind-target/sub1 umount2: Stale NFS file handle umount: /srv/bind-target/sub1: Stale NFS file handle umount2: Stale NFS file handle Here is a trace http://pastebin.com/ipvvrVmB I've tried umounting the sub-directories beforehand, find any processes accessing anything within the NFS or bind mounts (there are none). lsof also complains: $ lsof -n lsof: WARNING: can't stat() nfs file system /srv/nfs-source Output information may be incomplete. lsof: WARNING: can't stat() nfs file system /srv/bind-target/sub1 (deleted) Output information may be incomplete. lsof: WARNING: can't stat() nfs file system /srv/bind-target/ Output information may be incomplete. I've tried with recent stable Linux kernels 3.2.17, 3.2.19 and 3.3.8 (cannot use 3.4.x, cause need the grsecurity patch, which is not, yet, supported - grsecurity is not patched in in the tests above!). My nfs-utils are version 1.2.2 (debian stable). Does anybody have an idea how i can either: force the un-mount some other way? (any dirty trick is welcome, data loss or damage neglible at this point) use something else instead of mount -o bind? (cannot use soft links, cause mounted directories will be used in chroot; bindfs via FUSE is far to slow to be an option) Thanks, Paul Update 1 With 2.6.32.59 the umount of the (stale) sub-mounts work just fine. It seems to be a kernel regression bug. The above tests where with NFSv3. Additional tests with NFSv4 showed no change. Update 2 We have tested now multiple 2.6 and 3.x kernels and are now sure, that this was introduced in 3.0.x. We will fille a bug report, hopefully they figure it out.

  Read the article

• Trouble setting up PATH for Java on Debian

  - by milkmansrevenge

  I am trying to get Oracle Java 7 update 3 working correctly on Debian 6. I have downloaded and set up the files in /usr/java/jre1.7.0_03. I have also set the following two lines at the end of /etc/bash.bashrc: export JAVA_HOME=/usr/java/jre1.7.0_03 export PATH=$PATH:$JAVA_HOME/bin Logging in as other users and root is fine, Java can be found: chris@mc:~$ java -version java version "1.7.0_03" Java(TM) SE Runtime Environment (build 1.7.0_03-b04) Java HotSpot(TM) 64-Bit Server VM (build 22.1-b02, mixed mode) However there are two cases where Java cannot be found as detailed below. Note that both of these worked fine when I have previously installed OpenJDK Java 6 via aptitude, but I need Oracle Java 7 for various reasons. Most importantly, I cannot run commands as another user via su, despite the PATH showing that Java should be present. The user was created with adduser chris root@mc:~# su chris -c "echo $PATH" /usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/java/jre1.7.0_03/bin:/bin root@mc:~# su chris -c "java -version" bash: java: command not found root@mc:~# su chris -c "/usr/java/jre1.7.0_03/bin/java -version" java version "1.7.0_03" ... How can it be in the PATH but not be found? Update 05/04/2012: explained by Daniel, to do with it being a non-interactive shell so files such as /etc/profile and /etc/bash.bashrc are not executed. Doing a full swap to that user and running Java works: root@mc:~# su chris chris@mc:/root$ java -version java version "1.7.0_03" ... I run a script on start up which exhibits similar but slightly different problems. The script is located in /etc/init.d/start-mystuff.sh and calls a jar: #!/bin/bash # /etc/init.d/start-mystuff.sh java -jar /opt/Mars.jar I can confirm that the script runs on start up and the exit code is 127, which indicates command not found. Inserting a line to print/save the PATH shows that it is: /sbin:/usr/sbin:/bin:/usr/bin This second problem isn't as important because I can just point directly to the Java executable in the script, but I am still curious! I have tried setting the full PATH and JAVA_HOME explicitly in /etc/environment which didn't help. I have also tried setting them in /etc/profile which doesn't seem to help either. I have tried logging in and out again after setting PATH in the various locations (duh!). Anyway, long post for what will probably have a simple one line solution :( Any help with this would be greatly appreciated, I have spent far too long trying to fix it by myself. Motivation The first problem may seem obscure but in my system I have users that are not allowed SSH access yet I still want to run processes as them. I have a ton of scripts operating in this way and don't want to have to change them all.

  Read the article

• Remote installing an msi on citrix servers using WMI

  - by capn

  OK, I'm a C# programmer that is trying to streamline the deployment of a custom windows form app I inherited and built an installer for with WiX (this app will need to be reinstalled regularly as I'm making changes to it). I'm not really used to admin type things (or vbs, or WMI, or terminal servers, or Citrix, and even WiX and MSI are not things I usually deal with) but so far I put together some vbs and have an end goal in mind. The msi does work, and I've installed it from the mapped O: drive on my dev machine and while RDP'd to a citrix machine. End Goal: Deploy code written on my dev machine and compiled into an MSI (that I can improve upon within the confines of WiX and whatever the Windows Installer Engine allows) to the cluster of Citrix machines my users have access to. What am I missing in my script to get the MSI to execute on the remote machines? Layout: Machine A is my dev machine, and has the vbs script and the msi file (XP SP3) Machines C1 - C6 are the Citrix Servers that need the application installed them via the msi (Server 2003 R2 SP2) There is also optionally a shared network resource that all the machines can access. Script: 'Set WMI Constants Const wbemImpersonationLevelImpersonate = 3 Const wbemAuthenticationLevelPktPrivacy = 6 'Set whether this is installing to the debug Citrix Servers Const isDebug = true 'Set MSI location 'Network location yields error 1619 (This installation package could not be opened.) msiLocation = "\\255.255.255.255\odrive\Citrix Deployment\Setup.msi" 'Directory on machine A yields error 3 (file not found) 'msiLocation = "C:\Temp\Deploy\Setup.msi" 'Mapped network drive (on both machines) yield error 3 (file not found) 'msiLocation = "O:\Citrix Deployment\Setup.msi" 'Set login information strDomain = "MyDomain" Wscript.StdOut.Write "user name:" strUser = Wscript.StdIn.ReadLine Set objPassword = CreateObject("ScriptPW.Password") Wscript.StdOut.Write "password:" strPassword = objPassword.GetPassword() 'Names of Citrix Servers Dim citrixServerArray If isDebug Then citrixServerArray = array("C4") Else 'citrixServerArray = array("C1","C2","C3","C5","C6") End If 'Loop through each Citrix Server For Each citrixServer in citrixServerArray 'Login to remote computer Set objLocator = CreateObject("WbemScripting.SWbemLocator") Set objWMIService = objLocator.ConnectServer(citrixServer, _ "root\cimv2", _ strUser, _ strPassword, _ "MS_409", _ "ntlmdomain:" + strDomain) 'Set Remote Impersonation level objWMIService.Security_.ImpersonationLevel = wbemImpersonationLevelImpersonate objWMIService.Security_.AuthenticationLevel = wbemAuthenticationLevelPktPrivacy 'Reference to a process on the machine Dim objProcess : Set objProcess = objWMIService.Get("Win32_Process") 'Change user to install for terminal services errReturn = objProcess.Create _ ("cmd.exe /c change user /install", Null, Null, intProcessID) WScript.Echo errReturn 'Install MSI here 'Reference to a product on the machine Set objSoftware = objWMIService.Get("Win32_Product") 'All users set in option parameter, I'm led to believe that the third parameter is actually ignored 'http://www.webmasterkb.com/Uwe/Forum.aspx/vbscript/2433/Installing-programs-with-VbScript errReturn = objSoftware.Install(msiLocation,"ALLUSERS=2 REBOOT=ReallySuppress",True) Wscript.Echo errReturn 'Change user back to execute errReturn = objProcess.Create _ ("cmd.exe /c change user /execute", Null, Null, intProcessID) WScript.Echo errReturn Next I also tried using this to install, it doesn't return an error code, but doesn't install the msi either, and it makes me wonder if the change user /install command is even really working. errReturn = objProcess.Create _ ("cmd.exe /c msiexec /i ""O:\Citrix Deployment\Setup.msi"" /quiet") Wscript.Echo errReturn

  Read the article

• Run Flyff without elevating user to Admin or requiring Admin Password

  - by AnonJr

  Bottom Line: I need to set up one game on my little sister's laptop to run without requiring an admin password/account. Its the only game that seems to insist on it... so far. Detailed Version: I set up my 14-year-old sister as a regular user on her Windows 7 Home Premium laptop, and almost everything has been fine - until she found a new game (Flyff) that doesn't seem to want to run without an Admin Password (or being logged in as an Admin). For what should be obvious reasons, I'm not going to make her an Admin. or give her the Admin password (which she swears she'll only use to run this game... anyone else buying that? Bueller?) Also, the parents aren't admins on her laptop (they are on their own, but that's another discussion for another day) and I'm not going to set them up as one as I know from past experience that the 3rd time my sister asks them to put in their password, they'll just tell her what it is - at which point I might as well as have just set her up as an admin from the outset. This is a Win7 Home Premium (64-bit, but I doubt that makes a difference) laptop, so using GPEdit is out. I also tried an answer provided in a related (but less specific) question. The app has read/write permissions for its folder in Program Files (x86), yet that doesn't seem to make a difference. I have not yet dug through the registry as mentioned in another answer to the aforementioned question. Just to be thorough, I have checked the "Run as Admin" option on the shortcut's properties to no avail. Am I missing something? Addendum 2010-11-11: Re-Checked permissions as per Joel's answer, and it didn't make a difference. Followed Jane T's suggestion (and Aeo's second) and created a "Games" folder outside Program Files, installing the game there - and making sure regular users had all the permissions they would need. No joy. After the latter of the above two changes, it occurred to me that it may be a UAC issue, so for kicks I turned off UAC - still the damn message. Last item noted: could it be a result of the publisher not being specified/verified? I've been taking a closer look at the error message and it occurred to me that the missing/unverified publisher info could have been the problem all along... Correct me if I'm wrong, but if that's the case, that means there's nothing I can do short of giving her some sort of Admin privileges (i.e. elevating her account, or giving her the password to a separate Admin account) or giving Mom an Admin account.

  Read the article

• Apache + Tomcat error 120006 Using mod_proxy_ajp for Load Balance

  - by Wakaru44

  I have an apache 2 frontend with two nodes, and a backend with two instances of tomcat 6 balance with mod_proxy_ajp. The bbdd is in a separate machine. All machines use RHEL, 6.2 on the frontend, 5.5 on the backend. The infraestructure is virtualized using VMware. # This is the apache config in one of the virtualHost. ProxyPreserveHost On ProxyPass / balancer://liferay/ <Proxy balancer://liferay> BalancerMember ajp://lrab:8009 route=liferaya BalancerMember ajp://lrbb:8009 route=liferayb status=+H ProxySet lbmethod=byrequests nofailover=on </Proxy> The conector in tomcat is now configured like this: <!-- Define an AJP 1.3 Connector on port 8009 --> <Connector port="8009" protocol="AJP/1.3" redirectPort="8443" URIEncoding="UTF-8" enableLookups="false" allowTrace="true" /> Do you think it could be useful to set a maxThreads parameter, like in this post?? in that case, How can i determine a proper number of threads? From time to time, we get errors like this [Tue Sep 18 17:57:02 2012] [error] ajp_read_header: ajp_ilink_receive failed [Tue Sep 18 17:57:02 2012] [error] (120006)APR does not understand this error code: proxy: read response failed from 192.168.1.104:8009 (lrab) And apache switches to the pasive node (if its active) or fails with 503. Some things i have tried so far: I think that i have some performance issues with one of the applications, Here you can see a threadDump But i'm not quite sure about it. I also started to monitor the network connection. I have noticed that there are some pings lost when i have a "ping -f " so maybe it could be a network issue, but the success rate is 100% (so the lost packets are only a few among the flood, but maybe, i don't know, enough to break the link betwen apache and tomcat). I wrote a python script to check connectivity with timestamps on the pings, so i can know when the network fails. After sniffing the network , i can also see some RST packets, but i don't know if that is a normal behaviour (some applications do that to end a network communication). I have also noticed that the applications have problems communicating with the database, but im not even sure if this could be related or not. If you think so, i can post more info about it. I changed the connector on the tomcats to use the native one, but still the same. I need not even a solution to this, but maybe some guidance on how can i troubleshoot this better ¿Analyze threads, monitor mysql performance, sniff the traffic between apaches and tomcats? Ultimately, all i need is to balance the tomcat instances in Active/pasive mode, so if there is another way to do it, i could give it a try.

  Read the article

• Choosing my first Domain Registrar?

  - by user36914

  This will be the first domain i've ever registered. So i'm at a loss what to look for. I definitely don't want to go with GoDaddy. Here are my requirements: Must have unlimited email forwards for my domain Easy to transfer away if i choose. Must not be one of those shady registrars that will try to auction your domain at the end. Ability to create sub domains Domain Registration is Private I would like a domain registrar that would let me use my dynamic ip of my ISP (Cable) if i want to. So hopefully they would have some type program that would detect IP changes and update accordingly So i've looked at a variety of registrars so far. The three left were really NameCheap, DreamHost, & DomainMonster. I have heard good things about DreamHost but i think its off the list because they don't give you any information about the features you get when you register your domain with them. They have a "Whats included" button the page but it mainly list the features with hosting not registration. DomainMonster looks pretty cool but i don't see anything about subdomains. Also i would assume they don't have a system for dynamic ip address updating. So you would have to constantly check that your ip of your ISP has changed or not and update it manually. NameCheap also looks nice. There are two things i really like about them. Right on their feature page they list "Free Dynamic DNS With Client" which is pretty cool. They also have a free SSL certificate for the first year. Haven't messed a lot with certificates but this would definitely be something i would use. Only minus i can see is you only get free private whois for the first year. After that its $2.99 which isn't that big of a deal. I'm leaning towards NameCheap now. Is this a good choice. Is there anything else i should be looking at?

  Read the article

• Are FC and SAS DAS devices standard enough?

  - by user222182

  Before I ask my questions, here is some background info that may or may not be useful: For the first time I find myself needing a DAS solution. My priority is data through-put in a single direction. I can write large blocks, and I don't need to read at the same time. The server (the data producing device) is not really a typical server, its a very powerful single board computer. As such I have limited options when it comes to the add-in cards I can install since it must use the fairly uncommon interface, XMC. Currently I believe I am limited PCIex8 gen 1 which means that the likely bottle neck for me will be this 16gbps connection. XMC Boards I have found so far offer the following connections: a) Dual 10GBE ethernet controller, total throughput 20gbps b) Dual Quad SAS 2.0 Connectors (SFF-8XXX) HBA (no raid), total throughput 48 gbps c) Dual FC 8gb HBA (no raid), total throughput 16gbps My questions for you guys are: 1) Are SAS and/or FC, and by extension their HBAs, standard enough that I could purchase a Dell or Aberdeen storage server with a raid controller that has external SAS or FC ports and expect that I can connect it to my SAS or FC HBA, be presented with a single volume (if I so configured the storage server), all without having to check for HBA compatibility? 2) On a device like a Dell PowerVault (either DAS or NAS) is there an OS on it to concern myself with, or is it meant to be remotely managed? Is there a local interface in case I cant remotely manage it (i.e. if my single board computer uses an OS not supported by Dell OpenManage). Would this be true of nearly any device which calls itself a DAS? 3) If I purchase some sort of Supermicro storage chassis, installed a raid controller with external connections, is there a nice lightweight OS I can run just for management of the controller? Would I even need an OS since the raid card would be configured pre-boot anyway? 4) It is much easier to buy XMC based 10gigabit ethernet cards (generally dual port). In what ways would I be getting into trouble by using iSCSI as a DAS are direct cabling with SFP+ cables? Thanks in advance

  Read the article

• OpenLDAP with StartTLS broken on Debian Lenny

  - by mr.zog

  I'm trying to get OpenLDAP on Lenny to work with StartTLS. I have a Fedora 13 machine which I'm using as a client for testing. So far the Fedora client is ignoring the 'host' directive in /etc/ldap.conf when I try to connect using ldapsearch. The client wants to connect to 127.0.0.1:389 even if I specify -H ldaps://server.name on when using ldapsearch. /etc/ldap.conf on the client machine is in mode 444. But even when I try connecting locally from an ssh session, I see errors like this: ldap_sasl_interactive_bind_s: Can't contact LDAP server (-1) Someone hit me with a cluebat, plz. Update: you must use ~/.ldaprc for settings such as 'host'. Also, I just used nmap against the ldap server and it showed 636 and 389 in an open state. Here's what prints to screen when I try to connect with, ldapsearch -ZZ –x '(objectclass=*)'+ -d -1 ldap_create ldap_extended_operation_s ldap_extended_operation ldap_send_initial_request ldap_new_connection 1 1 0 ldap_int_open_connection ldap_connect_to_host: TCP 192.168.10.41:636 ldap_new_socket: 3 ldap_prepare_socket: 3 ldap_connect_to_host: Trying 192.168.10.41:636 ldap_pvt_connect: fd: 3 tm: -1 async: 0 ldap_open_defconn: successful ldap_send_server_request ber_scanf fmt ({it) ber: ber_dump: buf=0x9bdbdb8 ptr=0x9bdbdb8 end=0x9bdbdd7 len=31 0000: 30 1d 02 01 01 77 18 80 16 31 2e 33 2e 36 2e 31 0....w...1.3.6.1 0010: 2e 34 2e 31 2e 31 34 36 36 2e 32 30 30 33 37 .4.1.1466.20037 ber_scanf fmt ({) ber: ber_dump: buf=0x9bdbdb8 ptr=0x9bdbdbd end=0x9bdbdd7 len=26 0000: 77 18 80 16 31 2e 33 2e 36 2e 31 2e 34 2e 31 2e w...1.3.6.1.4.1. 0010: 31 34 36 36 2e 32 30 30 33 37 1466.20037 ber_flush2: 31 bytes to sd 3 0000: 30 1d 02 01 01 77 18 80 16 31 2e 33 2e 36 2e 31 0....w...1.3.6.1 0010: 2e 34 2e 31 2e 31 34 36 36 2e 32 30 30 33 37 .4.1.1466.20037 ldap_write: want=31, written=31 0000: 30 1d 02 01 01 77 18 80 16 31 2e 33 2e 36 2e 31 0....w...1.3.6.1 0010: 2e 34 2e 31 2e 31 34 36 36 2e 32 30 30 33 37 .4.1.1466.20037 ldap_result ld 0x9bd3050 msgid 1 wait4msg ld 0x9bd3050 msgid 1 (infinite timeout) wait4msg continue ld 0x9bd3050 msgid 1 all 1 ** ld 0x9bd3050 Connections: * host: 192.168.10.41 port: 636 (default) refcnt: 2 status: Connected last used: Sun Jun 6 12:54:05 2010 ** ld 0x9bd3050 Outstanding Requests: * msgid 1, origid 1, status InProgress outstanding referrals 0, parent count 0 ld 0x9bd3050 request count 1 (abandoned 0) ** ld 0x9bd3050 Response Queue: Empty ld 0x9bd3050 response count 0 ldap_chkResponseList ld 0x9bd3050 msgid 1 all 1 ldap_chkResponseList returns ld 0x9bd3050 NULL ldap_int_select read1msg: ld 0x9bd3050 msgid 1 all 1 ber_get_next ldap_read: want=8, got=0 ber_get_next failed. ldap_err2string ldap_start_tls: Can't contact LDAP server (-1)

  Read the article

• Further Performance Tuning on Medium SharePoint Farm?

  - by elorg

  I figured I would post this here, since it may be related more to the server configuration than the SharePoint configuration or a combination of both? I'm open for ideas to try, or even feedback on things that maybe have been configured incorrectly as far as performance is concerned. We have a medium MOSS 2007 install prepped and ready for receiving the WSS 2003 data to upgrade. The environment was originally architected by a previous coworker, and I have since added a few configuration modifications to assist with performance before we finally performed the install. When testing the new site collections & SharePoint install (no actual data yet), things seemed a bit slow. I had assumed that it was because I was accessing it remotely. Apparently the client is still experiencing this and it is unacceptably slow. 1 SQL Server running SQL Server 2008 2x SharePoint WFEs - hosting queries (no index) 1x SharePoint Index - hosting index (no queries) MOSS 2007 installed and patched up through December '09 on WFEs & Index All 4 servers are VMs, should have more than sufficient disk space & RAM (don't recall at the moment), and are running Windows Server 2008 - everything is 64-bit. The WFEs have Windows NLB configured, with a DNS name & IP for the NLB cluster. Single NIC on each server (virtual, since VMWare). The Index server is configured as a WFE (outside of the NLB cluster) so that it can index itself and replicate the indexes to the WFEs that will serve the queries. Everything is configured & working properly - it just takes a minute or two to load a page on the local LAN. The client is still using their old portal (we haven't started the migration/upgrade just yet) so there's virtually no data or users. We need to either further tune the configuration, or fix anything that may have been configured incorrectly which is causing this slowness? I've already reviewed & taken into account everything that I could find that was relevant before we even started the install. Does anyone have ideas or pointers? Perhaps there's something that I've missed?

  Read the article

• Can't set up printing from Mac OS X (10.5.7) to an HP PSC 2410 shared from PC running Ubuntu 9.10

  - by Weston C

  I've got an HP PSC 2410 printer shared from a fresh Ubuntu 9.10 installation. I'm able to send documents to this printer over the network from another Ubuntu machine. But so far, I haven't been able to find a setup where I can send documents to that printer from a MacBook running 10.5.7. On the Mac side, when setting things up, I go into System Prefs Print & Fax, click on the "+" mark, select "IP", pick "IPP", enter the IP address of the Ubuntu box, leave the queue blank, enter the Name and location, and I think it's when I get to the "Print Using" (driver selection) part that I'm running into issues. If I use "Auto Select", it defaults to "Generic PostScript Printer", which I doubt the PSC 2410 is (and sure enough, if I print, the jobs don't go through). If I try "Select a driver to use...", there's not an option for an HP PSC 2400. This seems a little odd: I can plug the printer directly into one of our Macs and it immediately figures out the driver and I can print no problem, but that's apparently the way things work. So, that leaves one option: "Other", which, when selected, brings up a dialog apparently for the purpose of manually locating a driver. I've tried visiting HP's web site. They have drivers for earlier versions of Mac OS X, but state that after 10.4, Mac OS X should just come with the relevant drivers. I've also tried setting things up by interacting with the CUPS server on the Mac through a browser: I go to http://localhost:631/, select "Add New Printer", pick "Internet Printing Protocol (http)" for the Device selection, enter "http://ubuntu.machine.ip.address:631/printers/hp-psc-2400-series" for the Device URI, select "HP" for Make, and then on the next screen, we're back to the problem where the PSC 2400 just doesn't show up. There's an option to "provide a PPD file", which I assume would be the printer driver I can't find. A Google search for "HP PSC 2410 ppd Leopard" doesn't seem to yield much other than a reminder that the printer is supposed to just work out of the box on Leopard. A local search for ".ppd" or "2410" on either Mac also doesn't yield anything that looks like a relevant print driver. I'm totally stuck at this point. Any advice?

  Read the article

• Apache2 graceful restart stops proxying requests to passenger

  - by Rob

  Issue with apache mod proxy, it stops proxying requests after a graceful restart but not all the time. It seems to happen only on a Sunday when a graceful restart is triggered by logrotate. [Sun Sep 9 05:25:06 2012] [notice] SIGUSR1 received. Doing graceful restart [Sun Sep 9 05:25:06 2012] [notice] Apache/2.2.22 (Ubuntu) Phusion_Passenger/3.0.11 configured -- resuming normal operations [Sun Sep 9 05:25:06 2012] [error] proxy: ap_get_scoreboard_lb(492) failed in child 26153 for worker proxy:reverse [Sun Sep 9 05:25:06 2012] [error] proxy: ap_get_scoreboard_lb(486) failed in child 26153 for worker http://api.myservice.org/api [Sun Sep 9 05:25:06 2012] [error] proxy: ap_get_scoreboard_lb(487) failed in child 26153 for worker http://api.myservice.org/editor/$1 [Sun Sep 9 05:25:06 2012] [error] proxy: ap_get_scoreboard_lb(489) failed in child 26153 for worker http://api.myservice.org/build [Sun Sep 9 05:25:06 2012] [error] proxy: ap_get_scoreboard_lb(490) failed in child 26153 for worker http://api.myservice.org/help [Sun Sep 9 05:25:06 2012] [error] proxy: ap_get_scoreboard_lb(491) failed in child 26153 for worker http://api.myservice.org/motd.html [Sun Sep 9 05:25:06 2012] [error] proxy: ap_get_scoreboard_lb(480) failed in child 26153 for worker http://api.myservice.org/api [Sun Sep 9 05:25:06 2012] [error] proxy: ap_get_scoreboard_lb(481) failed in child 26153 for worker http://api.myservice.org/editor/$1 [Sun Sep 9 05:25:06 2012] [error] proxy: ap_get_scoreboard_lb(483) failed in child 26153 for worker http://api.myservice.org/build [Sun Sep 9 05:25:06 2012] [error] proxy: ap_get_scoreboard_lb(484) failed in child 26153 for worker http://api.myservice.org/help [Sun Sep 9 05:25:06 2012] [error] proxy: ap_get_scoreboard_lb(485) failed in child 26153 for worker http://api.myservice.org/motd.html [Sun Sep 9 05:25:06 2012] [error] proxy: ap_get_scoreboard_lb(479) failed in child 26153 for worker http://api.myservice.org/motd.html After these lines, the logs are flooded with 404's because the requests are not being proxied. It's worth noting that the destination is just another vhost on the same apache instance, but the vhost (http://api.myservice.org) is serving passenger (mod_rails) I was thinking that maybe there's some startup issues with the passenger workers not being ready during a graceful restart? After a full restart resolves it and everything returns to normal. //Edit Here's the vhost config, thanks :) <VirtualHost *:80> UseCanonicalName Off LogFormat "%V %h %l %u %t \"%r\" %s %b" vcommon <Directory /var/www/vhosts> RewriteEngine on AllowOverride All </Directory> RewriteEngine on RewriteCond /var/www/vhosts/%{SERVER_NAME} !-d RewriteCond /var/www/vhosts/%{SERVER_NAME} !-l RewriteRule ^ http://sitenotfound.myservice.org/ [R=302,L] VirtualDocumentRoot /var/www/vhosts/%0/current # Rewrite requests to /assets to map to the /var/file-store/<SERVER_NAME>/ RewriteMap lowercase int:tolower RewriteCond %{REQUEST_URI} ^/assets/ RewriteRule ^/assets/(.*)$ /var/file-store/${lowercase:%{SERVER_NAME}}/$1 # Map /login to /editor.html as it's far friendlier. RewriteCond %{REQUEST_URI} ^/login RewriteRule .* /editor.html [PT] # Forward some requests to the API ProxyPass /api http://api.myservice.org/api ProxyPass /site.json http://api.myservice.org/api/editor/site ProxyPassMatch ^/editor/(.*)$ http://api.myservice.org/editor/$1 ProxyPassMatch ^/api/(.*) http://api.myservice.org/api/$1 ProxyPass /build http://api.myservice.org/build ProxyPass /help http://api.myservice.org/help ProxyPass /motd.html http://api.myservice.org/motd.html <Proxy *> Order allow,deny Allow from all </Proxy> # TODO generate slightly more specific Error Documents for 401/403/500's, # but for now the 404 page is good enough ErrorDocument 401 /404.html ErrorDocument 403 /404.html ErrorDocument 404 /404.html ErrorDocument 500 /404.html </VirtualHost>

  Read the article

• User given a login prompt when closing Word documents after viewing them in IE7

  - by Martin Owen

  When using IE7 to view Word documents on our CRM system (an ASP.NET 2.0 application running on Windows Server 2003 and IIS 6 and using Windows authenticaton) I'm finding that a prompt appears when the user closes the document. The Word document is originally opened by clicking a link in the CRM system. Are there permissions that I can set on the folder containing the Word documents to prevent this prompt? I've already tried only allowing the Read permission for the Users group (I've left Administrators with Full Control.) If there's another solution to this without using permissions please let me know. UPDATE: I ran Fiddler as suggested by JD and here is the output from the two responses after the request for the document. The first seems to be a DAV response and the second is the authentication request. How do I prevent the DAV response and just return the .doc on the server? OPTIONS / HTTP/1.1 Translate: f User-Agent: Microsoft Data Access Internet Publishing Provider Protocol Discovery Host: <REMOVED> Content-Length: 0 Connection: Keep-Alive Pragma: no-cache X-NovINet: v1.2 HTTP/1.1 200 OK Date: Thu, 18 Feb 2010 13:37:36 GMT Server: Microsoft-IIS/6.0 X-Powered-By: ASP.NET MS-Author-Via: DAV Content-Length: 0 Accept-Ranges: none DASL: <DAV:sql> DAV: 1, 2 Public: OPTIONS, TRACE, GET, HEAD, DELETE, PUT, POST, COPY, MOVE, MKCOL, PROPFIND, PROPPATCH, LOCK, UNLOCK, SEARCH Allow: OPTIONS, TRACE, GET, HEAD, COPY, PROPFIND, SEARCH, LOCK, UNLOCK Cache-Control: private ------------------------------------------------------------------ OPTIONS /docs/ZONE%20100-105.doc HTTP/1.1 Translate: f User-Agent: Microsoft Data Access Internet Publishing Provider Protocol Discovery Host: <REMOVED> Content-Length: 0 Connection: Keep-Alive Pragma: no-cache X-NovINet: v1.2 HTTP/1.1 401 Unauthorized Content-Length: 83 Content-Type: text/html Server: Microsoft-IIS/6.0 WWW-Authenticate: Basic realm="<REMOVED>" X-Powered-By: ASP.NET Date: Thu, 18 Feb 2010 13:37:36 GMT ------------------------------------------------------------------ UPDATE 2: I found a potential workaround for the problem via this post: http://forums.iis.net/p/1149091/1868317.aspx. I moved all of the documents that are being requested into a folder outside of the web root, and created a virtual directory for it (also outside of the web root). When I followed a link to one of the documents in IE and then closed the document I wasn't presented with a login prompt. I should point out that I'm not using FPSE, unlike the person in the forum post. Ideally I don't want to have to put the documents in a separate virtual directory, but this is the simplest solution I've found so far.

  Read the article

• Brand new Mac Pro tower fan suddenly runs full-tilt

  - by Caffeine Coma

  My Quad-Core Mac Pro tower is two days old. Initially, I was impressed with how quiet it was compared to my older Macbook Pro. Then on day two, for some reason it started running very loudly. It's not just a "little" loud- my wife walked into the room and asked what the noise was. At first I thought this was just because I was hitting the CPU a bit (importing my iPhone library into iLife '09, and running Eclipse). But now that that's done, Activity Monitor shows a virtually idle CPU; there's nothing running that ought to be causing this, as far as I can tell. I tried powering it off & letting it cool down for a few minutes to no avail; about 10 seconds after powering up, the box gets loud again. I took a look at it with the side cover off, and it seems to be the fan near the top middle, between the power supply and the disk drive. It can't be a dust issue, as the machine is only 2 days old (and I peeked inside anyway just to be sure- clean). I did do a software update over the past 24 hours or so, but I can't say that it occurred immediately after that. I also did a migration of my old apps and data from my MBPro, for what it's worth. Why is it suddenly so loud? How can I monitor the fan speed and various system temperatures? Here's a link to my temps and fan speeds. UPDATE 1: Took it to the Apple Store. They took it in the back (where it's presumably quieter) and ran a fan diagnostic; no problems were found. The guy also told me that it was "a little loud", but normal. I don't buy it. It was virtually silent the first 24 hours I was using it. They would not replace/service it in the store (grrr... that's why I went there, as directed by Apple Care) but said I could get a replacement from the online store, as it was just purchased. I think I will try that. UPDATE 2: Apple is letting me send it back for a replacement. Glad to see so many responses to this question mentioning that the MacPros are usually silent; it's not all just in my head. :-)

  Read the article

• Why is Denic not accepting my nameservers?

  - by Oliver Salzburg

  I'm currently in the process of moving all of our domains to our own nameservers. Which wasn't an issue until I hit our own .de domain. I (think I) understand the implications of having the NS inside it's own domain, hence the need for glue records. Until yesterday, I would have assumed I have a pretty good understanding of Bind and DNS zones until I was presented with this error from the Denic nameserver predelegation check: Inconsistent set of nameserver IP addresses (NS, provided glues, determined glues) ns2.hartwig-at.de [88.198.242.190/88.198.242.190] Default resolver determined: [], other resolvers determined: {88.198.242.190/88.198.242.190=[/2a01:4f8:d13:3c85:0:0:0:2, /88.198.242.190]} Inconsistent set of nameserver IP addresses (NS, provided glues, determined glues) ns1.hartwig-at.de [cloud.hartwig-at.de/176.221.46.23] Default resolver determined: [], other resolvers determined: {cloud.hartwig-at.de/176.221.46.23=[/2a00:1158:3:0:0:0:0:b6, /176.221.46.23]} Screenshot of the result The support of my registrar is either far better educated than me or doesn't have a clue. Either way, they're avoiding my questions in regards to what this error means. They just tell me Your nameserver has to return your own nameservers as the default resolver. But that doesn't make any sense to me and they refuse to try to explain it any other way. This is the head of my current zone file: @ 86400 IN SOA ns1.hartwig-at.de. hostmaster.hartwig-at.de. ( 2012070505 ; serial 1d ; refresh 3h ; retry 4w ; expiry 1h ) ; minimum 3600 IN NS ns1.hartwig-at.de. 3600 IN NS ns2.hartwig-at.de. 3600 IN MX 10 remote.hartwig-at.de. 3600 IN MX 20 mx1.hartwig-at.de. 3600 IN MX 30 mx2.hartwig-at.de. localhost 3600 IN A 127.0.0.1 localhost 3600 IN AAAA ::1 @ 3600 IN A 176.221.46.23 3600 IN AAAA 2a00:1158:3::b6 * 3600 IN A 176.221.46.23 3600 IN AAAA 2a00:1158:3::b6 hetzner 3600 IN A 88.198.242.190 hetzner 3600 IN AAAA 2a01:4f8:d13:3c85::2 cloud 3600 IN A 176.221.46.23 cloud 3600 IN AAAA 2a00:1158:3::b6 ; List all NS as A/AAAA record ns 3600 IN A 176.221.46.23 ns 3600 IN AAAA 2a00:1158:3::b6 ns1 3600 IN A 176.221.46.23 ns1 3600 IN AAAA 2a00:1158:3::b6 ns2 3600 IN A 88.198.242.190 ns2 3600 IN AAAA 2a01:4f8:d13:3c85::2 So, what is the problem with my zone? And what is the "default resolver"?

  Read the article

• how to diagnosis and resolve: /usr/lib64/libz.so.1: no version information available

  - by matchew

  I had a hell of a time installing lxml for python2.7 on centOs5.6. For some background, python2.7 is an alternative installation of python on centOS5.6 which comes with python2.4 installed. it was bulit from source per its instrucitons ./configure make make altinstall However, after about 20 hours of trying I managed to find a workable solution and was able to install lxml. Until, I notice the following error at the top of the interpreter: python2.7: /usr/lib64/libz.so.1: no version information available (required by python2.7) Python 2.7.2 (default, Jun 30 2011, 18:55:26) [GCC 4.1.2 20080704 (Red Hat 4.1.2-50)] on linux2 Type "help", "copyright", "credits" or "license" for more information. >>> print 'Sheeeeut!' this error is printed out everytime I run a script. For example: $ ./test.py /usr/local/bin/python2.7: /usr/lib64/libz.so.1: no version information available (required by /usr/local/bin/python2.7) the script runs flawlessly, but this error is bothersome. After some digging I have seem to believe I have a wrong version of libz installed, that it is either an older version or built for a different platform. I'm not quite sure how, I've only installed libz through yum, as far as I know. Although, I can't quite remember every little thing I tried in my twenty hours of trying. You may also be intereted in what my lib64 folder looks like, here is some information $ ls -ltrh libz* -rwxr-xr-x 1 root root 84K Jan 9 2007 libz.so.1.2.3 -rwxr-xr-x 1 root root 107K Jan 9 2007 libz.a -rwxr-xr-x 1 root root 154K Feb 22 23:30 libzdb.so.7.0.2 lrwxrwxrwx 1 root root 13 Apr 20 20:46 libz.so.1 -> libz.so.1.2.3 lrwxrwxrwx 1 root root 15 Jun 30 18:43 libzdb.so.7 -> libzdb.so.7.0.2 lrwxrwxrwx 1 root root 13 Jul 1 11:35 libz.so -> libz.so.1.2.3 lrwxrwxrwx 1 root root 15 Jul 1 11:35 libzdb.so -> libzdb.so.7.0.2 notice: the items that Say Jul 1st or Jun 30th are from me. I had initially moved these files into a backup folder as they seeemed to be 1. duplicates and 2. had a date after/during my problems I alluded to earlier that I had with lxml One inclination is to completely remove python2.7 and re-install. I think having it install to /usr/local/ was a poor default choice. However, without the make uninstall option being present it seems to be a time consuming task for a solution I am not quite sure would solve my problem.

  Read the article

• How do I get the latest FastCGI and PHP versions to peacefully coexist on IIS 6?

  - by BHelman

  I have been going round and round trying to get any sort of PHP running on IIS 6. I somehow managed to successfully get version 5.1.4 running using the php5isapi.dll file. However, I want to upgrade a website to begin using a Content Management System. I have never dug into CMS before so I'm open to programs that are easy to use. I am currently looking into TomatoCMS and ImpressCMS - but that's beside the point. I have never done an installation with PHP before and I think I'm getting familiar with how it works. However the current situation is this. Microsoft's Web Platform Installer 2.0 installed FastCGI for me. I need to upgrade to PHP 5.3.1 for a CMS system. So I downloaded the Windows installer and let it go at it. After consulting several other blog articles, I believe I know how it is supposed to work but I am currently not having luck. THE SETUP *.php is a registered extension in IIS 6 for all websites (on Win 2k3). The application that it calls is C:\Windows\system32\inetsvr\fcgiext.dll, like it should. The fcgiext.ini config has the proper lines: [Types] php=PHP [PHP] ext=C:\program files\PHP\php-cgi.exe And the php.ini file also has the correct configs. All extensions are disabled and I changed the correct things for FastCGI. And everything is registered correctly with the PATH variable. Everything is exactly how it should be. BUT when I launch the "info.php" page () on another computer, I get the following error: FastCGI Error The FastCGI Handler was unable to process the request. Error Details: * Section [PHP] not found in config file. * Error Number: 1413 (0x80070585). * Error Description: Invalid index. HTTP Error 500 - Server Error. Internet Information Services (IIS) A quick Google search reveals that I have it all setup correctly as far as the INI's go and the mapping of the php extension. I am completely at a loss. Does anyone have any suggestions? Although the server is hosting three small websites, I don't really care what I have to do to it to get it to work.

  Read the article

• Authenticate by libpam-mysql and libnss-mysql (CentOS)

  - by Chris

  I'm trying to get MySQL to function as a backend for authenticating users on CentOS 6.3. So far I have successfully installed and configured libnss-mysql. I can test this by doing: # groups testuser testuser : sftp Testuser is a member of the sftp group in fact, all MySQL based useraccounts will be hardcoded to it. The sftp group is chrooted and forced to use internal-sftp so they cannot do anything but access their home directory. Then I configured pam-mysql and PAM to allow mysql logins. This also works.. When SELinux is not enforcing. When I do setenforce 1 users can no longer login. Error: Permission denied, please try again. This is my pam_mysql.conf file: users.host=localhost users.db_user=nss-pam-user users.db_passwd=*********** users.database=sftpusers users.table=users users.user_column=username users.password_column=password users.password_crypt=6 verbose=1 My /etc/pam.d/sshd: #%PAM-1.0 auth sufficient pam_sepermit.so auth include password-auth auth required pam_mysql.so config_file=/etc/pam_mysql.conf account sufficient pam_nologin.so account include password-auth account required pam_mysql.so config_file=/etc/pam_mysql.conf password include password-auth # pam_selinux.so close should be the first session rule session required pam_selinux.so close session required pam_loginuid.so # pam_selinux.so open should only be followed by sessions to be executed in the user context session required pam_selinux.so open env_params session optional pam_keyinit.so force revoke session include password-auth And to be complete the contents of some log files.. /var/logs/secure Nov 20 14:52:20 hostname unix_chkpwd[4891]: check pass; user unknown Nov 20 14:52:20 hostname unix_chkpwd[4891]: password check failed for user (testuser) Nov 20 14:52:20 hostname sshd[4880]: pam_unix(sshd:auth): authentication failure; logname= uid=0 euid=0 tty=ssh ruser= rhost=192.168.10.107 user=testuser Nov 20 14:52:22 sftpusers sshd[4880]: Failed password for testuser from 192.168.10.107 port 51849 ssh2 /var/logs/audit/audit.log type=USER_AUTH msg=audit(1353420107.070:812): user pid=5285 uid=0 auid=500 ses=24 subj=unconfined_u:system_r:sshd_t:s0-s0:c0.c1023 msg='op=pubkey acct="testuser" exe="/usr/sbin/sshd" hostname=? addr=192.168.10.107 terminal=ssh res=failed' type=USER_AUTH msg=audit(1353420112.312:813): user pid=5285 uid=0 auid=500 ses=24 subj=unconfined_u:system_r:sshd_t:s0-s0:c0.c1023 msg='op=PAM:authentication acct="testuser" exe="/usr/sbin/sshd" hostname=192.168.10.107 addr=192.168.10.107 terminal=ssh res=failed' type=USER_AUTH msg=audit(1353420112.456:814): user pid=5285 uid=0 auid=500 ses=24 subj=unconfined_u:system_r:sshd_t:s0-s0:c0.c1023 msg='op=password acct="testuser" exe="/usr/sbin/sshd" hostname=? addr=192.168.10.107 terminal=ssh res=failed' I tried to let audit2why explain the problem but it remains silent even though there are some errors. Does anyone see the problem? Thanks! EDIT: Turns out it's almost working with setenforce 0 I can mkdir foobar but if I do a single ls I get an error: Received message too long 16777216

  Read the article

• HP MSR 30-10a Router - Route Traffic over Default Route

  - by SteadH

  We have a brand new HP MSR 30-10a Router. We have a fairly simple routing situation - we have two IP blocks, one which has a route out. We need things on the first block to go through the router, and out. I have an old Cisco 2801 router doing the job right now. For our example - IP Block 1: 50.203.110.232/29, Router interface on this block is 50.203.110.237, route out is 50.203.110.233. IP Block 2: 50.202.219.1/27, Router interface on this block at 50.202.219.20. I have a static route created for: 0.0.0.0 0.0.0.0 50.203.110.233 The router seems to understand this. When on the CLI via serial cable, I can ping 8.8.8.8 and hear responses from Google DNS. Woo hoo! The issue arrives when any client sits on the IP Block 2 side. I configured my client with a static IP of 50.202.219.15/27, default gateway 50.202.219.20. I can ping myself. I can ping the near side of the router (50.202.219.20), and I can ping the far side of the router (50.203.110.237. I cannot ping anything else in IP block 1, nor can I ping 8.8.8.8. Here is my configuration file: <HP>display current-configuration # version 5.20.106, Release 2507, Standard # sysname HP # domain default enable system # dar p2p signature-file flash:/p2p_default.mtd # port-security enable # undo ip http enable # password-recovery enable # vlan 1 # domain system access-limit disable state active idle-cut disable self-service-url disable # user-group system group-attribute allow-guest # local-user admin password cipher $c$3$40gC1cxf/wIJNa1ufFPJsjKAof+QP5aV authorization-attribute level 3 service-type telnet # cwmp undo cwmp enable # interface Aux0 async mode flow link-protocol ppp # interface Cellular0/0 async mode protocol link-protocol ppp # interface Ethernet0/0 port link-mode route ip address 50.203.110.237 255.255.255.248 # interface Ethernet0/1 port link-mode route ip address 50.202.219.20 255.255.255.224 # interface NULL0 # ip route-static 0.0.0.0 0.0.0.0 50.203.110.233 permanent # load xml-configuration # load tr069-configuration # user-interface tty 12 user-interface aux 0 user-interface vty 0 4 authentication-mode scheme # My guess right now is there is some sort of "permission" needed to use the default route. The manuals haven't turned up a lot in this area that don't make the situation much more complicated (but maybe it needs to be more complicated?) Background: we use HP switches, and I love the CLI. I bought HP thinking the command line interface would be similar, or at least speak the same language. Whoops! I'd be happy to provide more information or perform any additional tests. Thanks in advance! Update 1: The manual mentions routing rules. I hadn't previously added these (since our Cisco 2801 seems to route anything by default). I added: ip ip-prefix 1 permit 0.0.0.0 0 less-equal 32 alas, still no dice.

  Read the article

• How to make Horde connect to mysql with UTF-8 character set?

  - by jkj

  How to tell horde 3.3.11 to use UTF-8 for it's mysql connection? The $conf['sql']['charset'] only tells horde what is expected from the database. Horde uses MDB2 to connect to mysql. Is there way to force MDB2 or mysql character_set_client from php.ini? So far I found two workarounds: Force mysql to ignore character set requested by client [mysqld] skip-character-set-client-handshake=1 default-character-set=utf8 Force mysql to run SET NAMES utf8 on every connection [mysqld] init-connect='SET NAMES utf8' Both have drawbacks on multi user mysql server. The first disables converting character sets alltogether and the second one forces every connection to produce UTF-8. [EDIT] Found the problem. The 'charset' parameter was unset the last minute before sending to SQL backend. This is probably due to mysql not being able to digest utf-8 but utf8. Mysql specific mapping is required to make it work. I just worked around it by translating utf-8 - utf8. Won't work with any other databases with this patch though. --- lib/Horde/Share/sql.php.orig 2011-07-04 17:09:33.349334890 +0300 +++ lib/Horde/Share/sql.php 2011-07-04 17:11:06.238636462 +0300 @@ -753,7 +753,13 @@ /* Connect to the sql server using the supplied parameters. */ require_once 'MDB2.php'; $params = $this->_params; - unset($params['charset']); + + if ($params['charset'] == 'utf-8') { + $params['charset'] = 'utf8'; + } else { + unset($params['charset']); + } + $this->_write_db = &MDB2::factory($params); if (is_a($this->_write_db, 'PEAR_Error')) { Horde::fatal($this->_write_db, __FILE__, __LINE__); @@ -792,7 +798,13 @@ /* Check if we need to set up the read DB connection seperately. */ if (!empty($this->_params['splitread'])) { $params = array_merge($params, $this->_params['read']); - unset($params['charset']); + + if ($params['charset'] == 'utf-8') { + $params['charset'] = 'utf8'; + } else { + unset($params['charset']); + } + $this->_db = &MDB2::singleton($params); if (is_a($this->_db, 'PEAR_Error')) { Horde::fatal($this->_db, __FILE__, __LINE__);

  Read the article

• How to setup multiple Apache SSL sites using multiple IP addresses

  - by Jeff

  How do you setup a single Apache2 config to host multiple HTTPS sites each on their own IP address? There will also be multiple HTTP sites on just a single IP address. I do not want to use Server Name Indication (SNI) as described here, and I'm only concerned with the important top-level Apache directives. That is, I just need to know the skeleton of how my config should look. The basic setup looks like this: Hosted on 1.1.1.1:80 (HTTP) - example.com - example.net - example.org Hosted on 2.2.2.2:443 (HTTPS) - secure.com Hosted on 3.3.3.3:443 (HTTPS) - secure.net Hosted on 4.4.4.4:443 (HTTPS) - secure.org And here are the important config directives I have so far, which is the closest I've come to a working iteration, but still no dice. I know I'm close, just need a little push in the right direction. Listen 1.1.1.1:80 Listen 2.2.2.2:443 Listen 3.3.3.3:443 Listen 4.4.4.4:443 NameVirtualHost 1.1.1.1:80 NameVirtualHost 2.2.2.2:443 NameVirtualHost 3.3.3.3:443 NameVirtualHost 4.4.4.4:443 # HTTP VIRTUAL HOSTS: <VirtualHost 1.1.1.1:80> ServerName example.com DocumentRoot /home/foo/example.com </VirtualHost> <VirtualHost 1.1.1.1:80> ServerName example.net DocumentRoot /home/foo/example.net </VirtualHost> <VirtualHost 1.1.1.1:80> ServerName example.org DocumentRoot /home/foo/example.org </VirtualHost> # HTTPS VIRTUAL HOSTS: <VirtualHost 2.2.2.2:443> ServerName secure.com DocumentRoot /home/foo/secure.com SSLEngine on SSLCertificateFile /home/foo/ssl/secure.com.crt SSLCertificateKeyFile /home/foo/ssl/secure.com.key SSLCACertificateFile /home/foo/ssl/ca.txt </VirtualHost> <VirtualHost 3.3.3.3:443> ServerName secure.net DocumentRoot /home/foo/secure.net SSLEngine on SSLCertificateFile /home/foo/ssl/secure.net.crt SSLCertificateKeyFile /home/foo/ssl/secure.net.key SSLCACertificateFile /home/foo/ssl/ca.txt </VirtualHost> <VirtualHost 4.4.4.4:443> ServerName secure.org DocumentRoot /home/foo/secure.org SSLEngine on SSLCertificateFile /home/foo/ssl/secure.org.crt SSLCertificateKeyFile /home/foo/ssl/secure.org.key SSLCACertificateFile /home/foo/ssl/ca.txt </VirtualHost> For what it's worth, I prefer to have each of my SSL sites on their own IP instead of including one of them on the primary VHOST IP. Any links which show a standard setup would be more than welcome!

  Read the article

< Previous Page | 571 572 573 574 575 576 577 578 579 580 581 582  | Next Page >