Search Results

Search found 42786 results on 1712 pages for 'install from source'.

Page 575/1712 | < Previous Page | 571 572 573 574 575 576 577 578 579 580 581 582  | Next Page >

  • Trouble installing Ubuntu 12.04 from USB

    - by Kyle J
    I want to dual-boot Ubuntu Desktop 12.04 on my new ultrabook which has an Intel i7 3517U processor 6GB RAM Windows 7, 64-bit no CD/DVD drive I created my bootable USB stick using pendrivelinux.com with the "ubuntu-12.04.1-desktop-i386.iso". I am following these directions because they include nice screenshots; however, I do not get very far in the process. I am able to boot into the Live Desktop, and then I try to install onto my hard disk. Here are the series of actions that I take next: First, I see this ( http://i.imgur.com/vucYH ) window, and click 'continue' Then I get this ( http://imgur.com/2wESc ) window, and click 'continue' again This appears: and I get worried because it seems like there is no recognition that I have Windows installed. According to the directions I am following, I should see /dev/sda1 and /dev/sda2 partitions. In the drop-down menu at the bottom the only "Device for boot loader installation" is /dev/sdb and no information is shown. I am hesitant to click 'Install Now' for fear of what it might do to Windows. 4. I click 'Quit' and cancel the installation, but then about 5 seconds later this ( http://imgur.com/a/yXi0C ) window pops up (I have expanded it to full screen to scroll and show all the details). 5. Another second later this ( http://imgur.com/vxcrN ) comes up. I'm not sure how relevant this is. Does anyone have any insight into this issue?? Why does it not show my current Windows partition? What would happen if I tried to continue with the installation process? Thanks! PS - sorry, it would only let me post 2 hyperlinks as a new user

    Read the article

  • No login prompt displayed after updating Ubuntu 10.04, broken gdm

    - by cliff
    So here's what happens: I updated my system the other day, was prompted for a reboot for the update to complete but was in the middle of working so I delayed it until after I was done. I reboot and it's broken :(. It appears to boot normally, with the following exceptions: The purple Ubuntu load screen no longer displays (though it did for the first couple of times I tried to get in). I hear the login prompt sound, but no login prompt appears. Nor is it simply "invisible" - pressing enter, typing my password, and pressing enter again do nothing. Normally my Bluetooth mouse is functional at this point, but it is not. GRUB displays recovery options for my current kernel, and for an older one (2.6.32-24). Trying to boot into .32-24 gives me an error saying "udevadm can't do something while udev is not configured". So I try solutions listed here: http://superuser.com/questions/195786/ubuntu-update-went-wrong-pc-doesnt-boot-how-can-i-repair-it Nothing I tried seemed to work, and after further Googling my hunch is that it's a problem with gdm. Please correct me if I'm wrong, I don't know all that much about how Linux/Ubuntu systems work just yet. Things I'm able to do: Boot to a live CD Ctrl-Alt-F2 after that login sound plays brings me to a console login, which I can successfully do (it's how I tried the solutions above). This works only under the current kernel. A hack I'd be willing to explore is removing the login prompt from the console, but I'd prefer to "simply" fix what's wrong. Like that guy, I need to repair the system rather than reinstall. System: Dell Inspiron 1525 Core 2 Duo Proprietary Driver for Broadcom 43xx wireless Dual-boot with Windows 7 (which is how I'm posting this, unfortunately I only have this machine and any experimenting requires constant reboots into Windows/brokenbuntu) Last package installed was Moonlight, but it appeared to install properly. Kernel: 2.6.32-25 Edit: After working with Karl's suggestions, it seems that the problem is with gdm. Error exit status 245 when attempting to sudo apt-get install --reinstall gdm, also an error processing gdm when running sudo apt-get -f install. How do I reinstall or repair gdm so that I can get back into my machine?

    Read the article

  • Centrino Wireless-N 1000 takes forever to connect and keeps asking for password

    - by waclock
    A few days ago I started having this problem. When I tried to connect to any WiFi Connection it would stay connecting forever, and after a minute or so it would ask me for the password again. The strange thing is that this happened out of nowhere, I did not install any new drivers or anything like that. After this happened I decided to uninstall ubuntu and install it again ("inside windows") but the problem is still there. Any suggestions would be greatly appreciated. 0: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: no 1: hp-bluetooth: Bluetooth Soft blocked: yes Hard blocked: no 2: phy0: Wireless LAN Soft blocked: no Hard blocked: no description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:07:00.0 logical name: eth0 version: 06 serial: 2c:27:d7:aa:e4:7d size: 10Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=rtl8168e-3_0.0.4 03/27/12 latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:50 ioport:4000(size=256) memory:c0404000-c0404fff memory:c0400000-c0403fff *-network description: Wireless interface product: Centrino Wireless-N 1000 vendor: Intel Corporation physical id: 0 bus info: pci@0000:0d:00.0 logical name: wlan0 version: 00 serial: 00:1e:64:09:9c:58 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlwifi driverversion=3.2.0-23-generic-pae firmware=39.31.5.1 build 35138 latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:52 memory:c4500000-c4501fff *-network description: Ethernet interface physical id: 1 bus info: usb@2:1.2 logical name: eth1 serial: ee:85:2f:7d:80:96 capabilities: ethernet physical configuration: broadcast=yes driver=ipheth ip=172.20.10.2 link=yes multicast=yes

    Read the article

  • Create Virtual Image of Laptop before Formatting

    - by Simon Mark Smith
    I have a 3 year old laptop running Windows XP that I used for business. Although I have not used the laptop in over a year, I now want to re-commission it with Windows 7 and a fresh install. Before I do the fresh install I want to create a Virtual Image of the laptop that I can keep and potentially run on my desktop machine should I ever need to access any of the old files/projects that it contains currently. I know that most people will say just copy the files over to your desktop, but my concern is the configuration of the laptop. I used to use it for development and it has older versions of Visual Studio, SQL Server, Active X controls etc, etc than I currently use so I really want to preserve the environment not just the files. So really I am asking what is the best tool-set/method to achieve this? I understand there are free VM tools available but I have never done this before and would appreciate any help.

    Read the article

  • CodePlex Daily Summary for Monday, June 25, 2012

    CodePlex Daily Summary for Monday, June 25, 2012Popular ReleasesUmbraco CMS: Umbraco CMS 5.2: Development on Umbraco v5 discontinued After much discussion and consultation with leaders from the Umbraco community it was decided that work on the v5 branch would be discontinued with efforts being refocused on the stable and feature rich v4 branch. For full details as to why this decision was made please watch the CodeGarden 12 Keynote. What about all that hard work?!?? We are not binning everything and it does not mean that all work done on 5 is lost! we are taking all of the best and m...IIS Express Manager: IIS Express 0.31 B: V0.1B - 04 May, 2012 Initiated Project. V0.2B - 05May, 2012 1. Fixed small bug. Threw error when stop button was pressed in an already stopped application. 2. Removed start and stop button. Double clicking on list items will now stop / start the websites. 3. Improved code readability. 4. Changed Orientation of Buttons in UI. V0.3B - 06May, 2012 1. Complete modification of IISEM and process ID handling 2. IISEM is now capable of reflecting the existing IISExpress processes right from startup...SPMegaMenu 0.2.0.a: SPMegaMenu 0.2.0.a: SPMegaMenu 0.2.0.a - *Refined the menu to allow for sub category additions. *Release 0.1.0.a did not allow for sub categories. *Also added a Javascript Array Prototype to facilitate removal of duplicates in the sub category return. (the prototype is added as a workaround as I am not able to get the CAML GroupBy function to work correctly against a lookup column)CodeGenerate: CodeGenerate Alpha: The Project can auto generate C# code. Include BLL Layer、Domain Layer、IDAL Layer、DAL Layer. Support SqlServer And Oracle This is a alpha program,but which can run and generate code. Generate database table info into MS WordXDA ROM HUB: XDA ROM HUB v0.9: Kernel listing added -- Thanks to iONEx Added scripts installer button. Added "Nandroid On The Go" -- Perform a Nandroid backup without a PC! Added official Android app!ExtAspNet: ExtAspNet v3.1.8.1: +2012-06-24 v3.1.8 +????Grid???????(???????ExpandUnusedSpace????????)(??)。 -????MinColumnWidth(??????)。 -????AutoExpandColumn,???????????????(ColumnID)(?????ForceFitFirstTime??ForceFitAllTime,??????)。 -????AutoExpandColumnMax?AutoExpandColumnMin。 -????ForceFitFirstTime,????????????,??????????(????????????)。 -????ForceFitAllTime,????????????,??????????(??????????????????)。 -????VerticalScrollWidth,????????(??????????,0?????????????)。 -????grid/grid_forcefit.aspx。 -???????????En...AJAX Control Toolkit: June 2012 Release: AJAX Control Toolkit Release Notes - June 2012 Release Version 60623June 2012 release of the AJAX Control Toolkit. AJAX Control Toolkit .NET 4 – AJAX Control Toolkit for .NET 4 and sample site (Recommended). AJAX Control Toolkit .NET 3.5 – AJAX Control Toolkit for .NET 3.5 and sample site (Recommended). Notes: - The current version of the AJAX Control Toolkit is not compatible with ASP.NET 2.0. The latest version that is compatible with ASP.NET 2.0 can be found here: 11121. - Pages using ...WPF Application Framework (WAF): WPF Application Framework (WAF) 2.5.0.5: Version: 2.5.0.5 (Milestone 5): This release contains the source code of the WPF Application Framework (WAF) and the sample applications. Requirements .NET Framework 4.0 (The package contains a solution file for Visual Studio 2010) The unit test projects require Visual Studio 2010 Professional Changelog Legend: [B] Breaking change; [O] Marked member as obsolete WAF: Add IsInDesignMode property to the WafConfiguration class. WAF: Introduce the IModuleController interface. WAF: Add ...Windows 8 Metro RSS Reader: Metro RSS Reader.v7: Updated for Windows 8 Release Preview Changed background and foreground colors Used VariableSizeGrid layout to wrap blog posts with images Sort items with Images first, text-only last Enabled Caching to improve navigation between framesConfuser: Confuser 1.9: Change log: * Stable output (i.e. given the same seed & input assemblies, you'll get the same output assemblies) + Generate debug symbols, now it is possible to debug the output under a debugger! (Of course without enabling anti debug) + Generating obfuscation database, most of the obfuscation data in stored in it. + Two tools utilizing the obfuscation database (Database viewer & Stack trace decoder) * Change the protection scheme -----Please read Bug Report before you report a bug-----...XDesigner.Development: First release: First releaseBlackJumboDog: Ver5.6.5: 2012.06.22 Ver5.6.5  (1) FTP??????? EPSV ?? EPRT ???????DotNetNuke® Form and List: 06.00.01: DotNetNuke Form and List 06.00.01 Changes in 06.00.01 Icons are shown in module action buttons (workaraound to core issue with IconAPI) Fix to Token2XSL Editor, changing List type raised exception MakeTumbnail and ShowXml handlers had been missing in install package Updated help texts for better understanding of filter statement, token support in email subject and css style Major changes for fnL 6.0: DNN 6 Form Patterns including modal PopUps and Tabs http://www.dotnetnuke.com/Po...MVVM Light Toolkit: V4RTM (binaries only) including Windows 8 RP: This package contains all the latest DLLs for MVVM Light V4 RTM. It includes the DLLs for Windows 8 Release Preview. An updated Nuget package is also available at http://nuget.org/packages/MvvmLightLibs An installer with binaries, snippets and templates will follow ASAP.Weapsy - ASP.NET MVC CMS: 1.0.0: - Some changes to Layout and CSS - Changed version number to 1.0.0.0 - Solved Cache and Session items handler error in IIS 7 - Created the Modules, Plugins and Widgets Areas - Replaced CKEditor with TinyMCE - Created the System Info page - Minor changesAcDown????? - AcDown Downloader Framework: AcDown????? v3.11.7: ?? ●AcDown??????????、??、??????。????,????,?????????????????????????。???????????Acfun、????(Bilibili)、??、??、YouTube、??、???、??????、SF????、????????????。 ●??????AcPlay?????,??????、????????????????。 ● AcDown??????????????????,????????????????????????????。 ● AcDown???????C#??,????.NET Framework 2.0??。?????"Acfun?????"。 ????32??64? Windows XP/Vista/7/8 ??:????????Windows XP???,?????????.NET Framework 2.0???(x86),?????"?????????"??? ??????????????,??????????: ??"AcDown?????"????????? ...NShader - HLSL - GLSL - CG - Shader Syntax Highlighter AddIn for Visual Studio: NShader 1.3 - VS2010 + VS2012: This is a small maintenance release to support new VS2012 as well as VS2010. This release is also fixing the issue The "Comment Selection" include the first line after the selection If the new NShader version doesn't highlight your shader, you can try to: Remove the registry entry: HKEY_CURRENT_USER\Software\Microsoft\VisualStudio\11.0\FontAndColors\Cache Remove all lines using "fx" or "hlsl" in file C:\Program Files (x86)\Microsoft Visual Studio 11.0\Common7\IDE\CommonExtensions\Micr...3D Landmark Recognition: Landmark3D Dataset V1.0 (7z 1 of 3): Landmark3D Dataset Version 1.0Xenta Framework - extensible enterprise n-tier application framework: Xenta Framework 1.8.0: System Requirements OS Windows 7 Windows Vista Windows Server 2008 Windows Server 2008 R2 Web Server Internet Information Service 7.0 or above .NET Framework .NET Framework 4.0 WCF Activation feature HTTP Activation Non-HTTP Activation for net.pipe/net.tcp WCF bindings ASP.NET MVC ASP.NET MVC 3.0 Database Microsoft SQL Server 2005 Microsoft SQL Server 2008 Microsoft SQL Server 2008 R2 Additional Deployment Configuration Started Windows Process Activation service Start...MFCMAPI: June 2012 Release: Build: 15.0.0.1034 Full release notes at SGriffin's blog. If you just want to run the MFCMAPI or MrMAPI, get the executables. If you want to debug them, get the symbol files and the source. The 64 bit builds will only work on a machine with Outlook 2010 64 bit installed. All other machines should use the 32 bit builds, regardless of the operating system. Facebook BadgeNew ProjectsAudio-Gallery-Suite: Audio-Gallery-Suite is a complete audio gallery solution that includes a web audio gallery and a windows application for its complete management.caoliu_????????-????: ????????????Decanini: Teste de SummaryDevToolkit: placeholderdotCommand: dotCommand project explores various .NET implementations of Command design pattern, by providing and measuring those implementations.Engine Wars Chess Manager Service: EngineWars is Client/Server framework to host chess matches of humans vs humans, humans vs Chess Engines, and engines vs engines in casual play and tournaments.FsHtml: A tiny HTML parser in F#JAVALINKDotHandler: BÁSICO Sistema para avaliação de A5LP1 - IFSP - Campi SÃO PAULOKylinORM ????: KylinORM???????,??AOP?DDD???????????。LegendJS 2D: A 2D engine written in Javascript and Canvas. Aims to be easy learn and flexible enough to develop complex 2D game or other 2D application. LegendJS manages youMetroToolbox: A library of useful tools for developer metro apps on windows rt.M-i-c-r-o-S-o-f-t-W-M-S: M8i8c8r8o8S8o8f8t M8i8c8r8o8S8o8f8t M8i8c8r8o8S8o8f8tMineSweeping: 1234567890Multiplatform GTK Docking Panel in MONO: This is an open source project to develop a multiplatform dock-panel library in Gtk for Mono.MyAbcdefg_abcdefg: MyAbcdefg_abcdefgPlugin PagSeguro for NopCommerce 2.5: PagSeguro paymento module for nopcommerce 2.5 This is a brazilian payment method.Reckoning: Reckoning is a word counter that reports the frequencies of words in a piece of text. Seo Proxy: Seo Proxy is a proxy fetcher and checker. Project is intended to create ultimate tool to get proxies from websites and build quality lists.SharePoint Auriga blog: -SharpToolkit: placeholderShift2D: Shift2D????XNA?? Shift2D??????WPF、Silverlight????,????????,???????,?????????。Simple TFTP loader for Windows Embedded Compact EBOOT: Utility to download NK.BIN files to EBOOT without using PLatform Builder'SUMC Reader: SUMC reader - read info from http://m.sumc.bg I named SUMC, because that's the official nickname of Sofia public transport. t: tVertical Shooter RPG: Vertical Shooter RPG is an XNA open source game that will be an update to the vertical shooter genre by adding a world map and upgradable options.w___m___s___uupiwqewrqewypouyupqurpe: sdfasdfadsfafadsfsadfworkmanagesystem: This is the Course Project for School of E&M NCEPU owned by OLDBIG12. Now OLDBIG12 and Silent are develeoping it. It's just my first project on CodePlex.

    Read the article

  • What tools should every programmer know?

    - by acidzombie24
    What are some tools every programmer know about? Some examples i thought were Source control. (No explanation needed) Profiler. Many could go without but its good to know how to use one when the occasion arise What else? I was thinking a bug report software but i havent used one so i wasnt sure. Should programmers know how to use TRAC? I remember in the past a person telling me if i was making a shared library i should know (Some Name) which generates docs from the source (in that case C++). What was that called and what else should i know about? -edit- what about team management software? any software you could not live without in a specific project would be a good mention. I'll also mention i use VMs frequently during the prototype or end phase to see if there are any issues on a clean XP or linux distro and if i forgot anything in my redistribution. I cant imagine the end/release and testing phase of a project without a VM.

    Read the article

  • iptables & allowed port refusing connection

    - by marfarma
    Can you see what I'm doing wrong? On Ubuntu Server 9.1, I'm attempting to allow traffic on port 1143 for a non-privileged IMAP host. Connection is refused when testing with telnet example.com 1143 but connection is allowed testing with telnet example.com 80 from my pc to remote internet hosted server. Both rules appear identical and are located near each other with no rules rejecting connections intervening in the rules file. I can't figure it out. iptables -L returns this: Chain INPUT (policy ACCEPT) target prot opt source destination ACCEPT all -- anywhere anywhere REJECT all -- anywhere 127.0.0.0/8 reject-with icmp-port-unreachable ACCEPT all -- anywhere anywhere state RELATED,ESTABLISHED ACCEPT tcp -- anywhere anywhere tcp dpt:www ACCEPT tcp -- anywhere anywhere tcp dpt:https ACCEPT tcp -- anywhere anywhere tcp dpt:http-alt ACCEPT tcp -- anywhere anywhere tcp dpt:7070 ACCEPT tcp -- anywhere anywhere tcp dpt:1143 ACCEPT tcp -- anywhere anywhere state NEW tcp dpt:ssh ACCEPT icmp -- anywhere anywhere icmp echo-request LOG all -- anywhere anywhere limit: avg 5/min burst 5 LOG level debug prefix `iptables denied: ' REJECT all -- anywhere anywhere reject-with icmp-port-unreachable Chain FORWARD (policy ACCEPT) target prot opt source destination REJECT all -- anywhere anywhere reject-with icmp-port-unreachable Chain OUTPUT (policy ACCEPT) target prot opt source destination ACCEPT all -- anywhere anywhere and my rules file contains this: # Generated by iptables-save v1.4.4 on Wed May 26 19:08:34 2010 *nat :PREROUTING ACCEPT [3556:217296] :POSTROUTING ACCEPT [6909:414847] :OUTPUT ACCEPT [6909:414847] -A PREROUTING -p tcp -m tcp --dport 80 -j REDIRECT --to-ports 8080 -A PREROUTING -p tcp -m tcp --dport 80 -j REDIRECT --to-ports 8080 COMMIT # Completed on Wed May 26 19:08:34 2010 # Generated by iptables-save v1.4.4 on Wed May 26 19:08:34 2010 *filter :INPUT ACCEPT [1:52] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [1:212] -A INPUT -i lo -j ACCEPT -A INPUT -d 127.0.0.0/8 ! -i lo -j REJECT --reject-with icmp-port-unreachable -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT -A INPUT -p tcp -m tcp --dport 80 -j ACCEPT -A INPUT -p tcp -m tcp --dport 443 -j ACCEPT -A INPUT -p tcp -m tcp --dport 8080 -j ACCEPT -A INPUT -p tcp -m tcp --dport 7070 -j ACCEPT -A INPUT -p tcp -m tcp --dport 1143 -j ACCEPT -A INPUT -p tcp -m state --state NEW -m tcp --dport 22 -j ACCEPT -A INPUT -p icmp -m icmp --icmp-type 8 -j ACCEPT -A INPUT -m limit --limit 5/min -j LOG --log-prefix "iptables denied: " --log-level 7 -A INPUT -j REJECT --reject-with icmp-port-unreachable -A FORWARD -j REJECT --reject-with icmp-port-unreachable -A OUTPUT -j ACCEPT COMMIT # Completed on Wed May 26 19:08:34 2010

    Read the article

  • Active Directory Problem

    - by Ankur Dholakiya
    Hello All, I have one server 2008 installed with AD, SQL and IIS. Now I am trying to attach different HDD on this server only. I am able to install windows server 2008 r2 64bit on the server, but when I try to install the ActiveDirectory on the server the setup doesn't get completed and keep processing at following level. "Configuring Active directory and local host domains ......." If I attach same HDD on any other PC Active directory setups completes successfully. My server is Xeon quad core with 8GB of RAM. Can any one help the appropriate solution for this?

    Read the article

  • Ubuntu 11.04 does not detect my tata photon +

    - by nikhil
    I am trying to connect to the Internet via my photon+ from the past day and have tried various suggestions on the Internet and have tried to zero in to the main cause of the problem which is that my device is not detected. I have tried the following ways: 1) After connecting the device, I tried to create a mobile broadband connection via System Preferences Network Connections and selected tata photon plus. But there was no connection. 2) I did sudo apt-get install usb-modeswitch-data and sudo apt-get install usb-modeswitch But the prompt said that they are at their newest version. 3) I tried to edit the file sudo gedit /etc/usb_modeswitch.d/12d1:1446, but this file did not exist. 4) my lsusb output is nikhil@nikhil:~$ lsusb Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 003: ID 22f4:0021 Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 04f2:b159 Chicony Electronics Co., Ltd Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Any Ideas ??

    Read the article

  • Disk image of a Windows 2000 NTFS hard drive

    - by Federico
    Hi, I need to create a disk image from a Windows 2000, NTFS formatted, hard drive. This image has to be used to create backup hard drives to replace the original disk in case an emergency situation arises. This is a medical equipment, so I cannot physically disconnect the disk because I would violate the warranty of the equipment. This machine has a DVD R/W, ethernet and USB 2.0 access, and we have the rights to install any application I want in the Windows 2000 system. 1) Is there any way to do this without installing any new software in the Windows 2000 system, so it is the least invasive as possible? 2) If we have to install a software to do the backup, which software do you recommend? Any hint will be greatly appreciated. Thanks in advance, Federico

    Read the article

  • Startup Disk Creator tool for Debian

    - by user61954
    I was trying to create a USB bootable in Debian to install my new system. I couldnt find any easy to use tool in Debian. I tried downloading the hybrid iso image from the Debian site and copied it to the USB using the dd command as said in Debian site. But it didnt boot. Next I used the Startup Disk Creator tool in Ubuntu and it worked like a charm. Is there any similar tool in Debian? I know that there is Unetbootin but its difficult to install

    Read the article

  • Recommended total system backup solution

    - by bioShark
    I hope this question won't get closed immediately since it has a generic title. I already searched a bit around the answers here, but nothing satisfied me. I want a back-up solution that makes a total back-up, so that I can restore my Ubuntu in case of major failures, like HDD failing. As far as I can see, I have 2 choices: 1) Backing up with Deja Dup to an external disk. This is fine and I am already doing, but in case my HDD fails, and I make a new Ubuntu install on a new disk, will Deja Dup be able to restore all my setting and stuff from the backed up files? If it can, then what other files/folders should I add in Deja Dup to back-up (currently I have set only the recommended /home folder)? Is there a point in telling Deja Dup to back-up everything under "/" ? 2) A disk/partition cloning software. This would be something similar to Noton ghost. Is there such a software with nice GUI that you could recommend for Ubuntu? And even better, it would be nice if Ubuntu's liveCD could recognize such a clone at install step. I am using 11.10

    Read the article

  • Brother MFC-J470DW scan function "Check Connection"

    - by user292599
    I have a Brother MFC-J470DW printer that I have connected to a Linux desktop (running Ubuntu 14.04) using a wireless router network. The printer works fine for printing and copying, but now I want to add the scan function. To set up the scan function, I went to the Brother web page for this printer: http://support.brother.com/g/b/downloadlist.aspx?c=eu_ot&lang=en&prod=mfcj470dw_us_eu_as&os=128 and under Scanner Drivers selected "Scanner driver 64bit (deb package)", "Scan-key-tool 64bit (deb package)", and "Scanner Setting file (deb package)". For each package, I clicked the EULA, and selected "open with Ubuntu Software Center". Then after the USC window pops up, I click on Install and the red line goes from left to right. In each case, the USC window then had a green checkmark and the Install box changes to Reinstall (that's how you know it worked). So now I try it out. Hitting the Scan button on the printer, selecting "Scan to file", and hitting ok produces the message "Check Connection". I checked the Brother Linux Information FAQ (scanner) page and the 14th question seems the same as mine: When I try to use the scan key on my network connected machine, I receive the error "Check connection" or I can not select anything except "scan to FTP". I explored the solution given for this FAQ, but found from ifconfig that I am already using eth0, the default setting, so presumably that is not the problem. I also found brscan-skey installed in /usr/bin and did drrm@drrmlinux2:~$ brscan-skey -t drrm@drrmlinux2:~$ brscan-skey but that didn't help - I still get the "Check connection" message. What can you suggest to fix this problem?

    Read the article

  • ALERT: Error Processing US Wage Attachment Elements In Payroll Run After RUP Patches

    - by LuciaC
    Customers who have run the Upgrade Wage Attachments process after applying the 2012 RUP are reporting errors similar to those listed below when either running a quickpay or processing a payroll for employee(s) with involuntary deductions. Error: HR_51118_HRPROC_ERR_ON_ASG ASGNO 1115 APP-PAY-51118: Error was encountered when processing assignment 1115 HR_51119_HRPROC_ERR_OCC_ON_ET ETNAME: Garnishment 3 APP-PAY-51119: Error was encountered when processing Element Type Garnishment 3 HR_6881_HRPROC_ORA_ERR SQLERRMC ORA-01403: No data found SQL_NO 520 TABLE_NAME pay_input_values_f APP-PAY-06881:Error ORA-01403: no data found has occured in table pay_input_values_f at location 520 This issue was logged in Bug 14679161 - QUICK PAY ERROR AFTER RUP (2012) AND WAGE ATTACHMENT UPGRADE APP-PAY-06881. The following one off patches have been released to My Oracle Support to resolve this issue*: 11i -  Patch 14679161 12.0 - Patch 14849394:R12.PAY.A 12.1 - Patch 14849394:R12.PAY.B * IMPORTANT:  Depending on when/if customers have run the Wage Attachment upgrade process will determine the appropriate action to take. Any customer who is encountering the above error and/or has run the Wage Attachment upgrade process AFTER applying the 2012 RUP (applicable to their release level) should log a Service Request with Oracle Support to receive assistance on the necessary steps to take to resolve the problem BEFORE applying the above patch. Any customer who has not yet run the Wage Attachment Upgrade process (either before or after applying the 2012 RUP), should follow the action plan documented in the patch readme. For those customers who have already run the Wage Attachment Upgrade process BEFORE applying the 2012 RUP, should apply the patch (applicable to your release) listed above. Be sure to run any post install processes, such as the data install utility and HR global driver.  See the patch readme for full details. Please consult Note 404478.1: Americas (US, CA, MX) HCM High Priority Alert for the latest Alert status.

    Read the article

  • nginx 502 bad gateway - fastcgi not listening? (Debian 5)

    - by Sean
    I have experience with nginx but it's always been pre-installed for me (via VPS.net pre-configured image). I really like what it does for me, and now I'm trying to install it on my own server with apt-get. This is a fairly fresh Debian 5 install. I have few extra packages installed but they're all .deb's, no manual compiling or anything crazy going on. Apache is already installed but I disabled it. I did apt-get install nginx and that worked fine. Changed the config around a bit for my needs, although the same problem I'm about to describe happens even with the default config. It took me a while to figure out that the default debian package for nginx doesn't spawn fastcgi processes automatically. That's pretty lame, but I figured out how to do that with this script, which I found posted on many different web sites: #!/bin/bash ## ABSOLUTE path to the PHP binary PHPFCGI="/usr/bin/php5-cgi" ## tcp-port to bind on FCGIPORT="9000" ## IP to bind on FCGIADDR="127.0.0.1" ## number of PHP children to spawn PHP_FCGI_CHILDREN=10 ## number of request before php-process will be restarted PHP_FCGI_MAX_REQUESTS=1000 # allowed environment variables sperated by spaces ALLOWED_ENV="ORACLE_HOME PATH USER" ## if this script is run as root switch to the following user USERID=www-data ################## no config below this line if test x$PHP_FCGI_CHILDREN = x; then PHP_FCGI_CHILDREN=5 fi ALLOWED_ENV="$ALLOWED_ENV PHP_FCGI_CHILDREN" ALLOWED_ENV="$ALLOWED_ENV PHP_FCGI_MAX_REQUESTS" ALLOWED_ENV="$ALLOWED_ENV FCGI_WEB_SERVER_ADDRS" if test x$UID = x0; then EX="/bin/su -m -c \"$PHPFCGI -q -b $FCGIADDR:$FCGIPORT\" $USERID" else EX="$PHPFCGI -b $FCGIADDR:$FCGIPORT" fi echo $EX # copy the allowed environment variables E= for i in $ALLOWED_ENV; do E="$E $i=${!i}" done # clean environment and set up a new one nohup env - $E sh -c "$EX" &> /dev/null & When I do a "ps -A | grep php5-cgi", I see the 10 processes running, that should be ready to listen. But when I try to view a web page via nginx, I just get a 502 bad gateway error. After futzing around a bit, I tried telneting to 127.0.0.1 9000 (fastcgi is listening on port 9000, and nginx is configured to talk to that port), but it just immediately closes the connection. This makes me think the problem is with fastcgi, but I'm not sure what I can do to test it. It may just be closing the connection because it's not getting fed any data to process, but it closes immediately so that makes me think otherwise. So... any advice? I can't figure it out. It doesn't help that it's 1AM, but I'm going crazy here!

    Read the article

  • How to force-restart a PC with vPro technology?

    - by Dan Nissenbaum
    I would like to know how to force-restart a PC that has crashed/hung and become completely non-responsive, using 2nd-generation vPro technology. Assume there is a second, fully responsive PC on the same LAN that can be accessed remotely to assist. Specifically, I am considering purchasing a PC with an i7-2860QM CPU, which is vPro-enabled (according to Intel). Here are two links that indicate it should be possible to force-restart a hung system with a 2nd-generation vPro-enabled CPU: Seconds 24-39 of What Is Intel vPro™ Technology? Page 17 (21 of the PDF) of Intel® vPro™ Technology: Reference Guide However, after extensive research, I cannot find a straightforward and trustworthy source of confirmation that this will actually work as I describe, or any documentation about how to set it up. I would appreciate both a reliable confirmation, and a source of documentation. This question is a follow-up to: Wake-on-LAN (WOL) fails after computer crashes (Windows 7 64-bit).

    Read the article

  • Ubuntu doesn't boot after adding a bootflag to the Windows partition

    - by Nils
    I have Ubuntu 10.10 installed on one (physical) hd and on the other one Windows. On both drives grub is installed to boot both operating systems. When I wanted to install SP1 for Win 7 I had to add a bootable flag to the partition from which Windows boots, otherwise the installation of SP1 does not work. I did so by booting into Ubuntu and using gparted to add this flag. After doing so the update for SP1 worked without any problems. When trying to boot back into Ubuntu grub complained that it couldn't find the kernel anymore! I tried to boot into a Ubuntu minimal cd and to restore grub using chroot, update-grub and grub-install which didn't work. I still had the problem that it was Unable to boot Ubuntu putting me in some minimal system called initramfs. It seems however that the uuid of the partitions changed. I guess this happened when I added the bootflag to the windows disk. Next thing I tried was to tell grub not to use the uuid for loading the kernel by uncommenting something in /etc/default/grub. Then I got the kernel booting but it suddenly stops (I guess when it is trying to mount the root file system) saying that the concerning uuid does not exist putting me into initramfs again. The strange thing is that there I coulnd't even manage to mount the root partition using /dev/sdb1 (on which it is in my case). I would be glad if there is a way to restore the system again without having to reinstall it.

    Read the article

  • Wrong package for Idle-python2.7?

    - by adelval
    I'm running python 2.7 in Ubuntu 3.10, and idle (idle-python2.7) has stopped working. Whenever I try to open a file in a editor window, it is blank, though the file does exist and is not empty/blank. Furthermore, it is not possible to close idle after this, except via a terminal kill command. Idle was working fine before. The problem appeared after I installed a number of things, including idlex, various scipy modules and mpmath, but after trying to repair it in several ways, it seems to be caused by Ubuntu's official idle package. I get this error in the terminal when trying to open a file in idle: Exception in Tkinter callback [...lines ommitted for brevity...] File "/usr/lib/python2.7/idlelib/IOBinding.py", line 129, in coding_spec for line in lst: NameError: global name 'lst' is not defined If you look at the code, it looks like an obvious bug: indeed lst is not defined in the function coding_spec. Furthermore, the source file IOBinding.py in http://fossies.org/dox/Python-2.7.5/IOBinding_8py_source.html is different and doesn't show the problem. Thinking that one of the recently packages had overwritten the file somehow, I've tried a number of things, including reinstalling all Python packages from synaptic, but the wrong IOBinding.py is still there. The reason I think the problem lies with the package itself is that I finally did sudo apt-get remove idle, verified that the idlelib directory was empty, and reinstalled with sudo apt-get install idle; but the wrong IOBinding.py file came back again. I can in fact make idle work again by simply replacing lst by str in the code, but to me that's clearly a no-no. I'm not to happy either about trying to replace just that file from the source python distribution, as other files may be wrong. I want to get the right files from the official package.

    Read the article

  • Installing PHP-GTK with PHP 5.3 on OS X

    - by Shabbyrobe
    I'm having trouble getting php-gtk installed with php 5.3 on os x. I'm currently using macports to do it and when I try to install php-gtk, it spews 'duplicate static' errors: Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_php_php5-gtk/work/php-gtk-2.0.1" && /usr/bin/make -j2 all " returned error 2 Command output: ext/gtk+/gen_pango.c:2951: error: duplicate 'static' ext/gtk+/gen_pango.c:2957: error: duplicate 'static' ext/gtk+/gen_pango.c:3097: error: duplicate 'static' ext/gtk+/gen_pango.c:3103: error: duplicate 'static' Is there a way to coerce it into building, or an alternative way to install it?

    Read the article

  • no aparece grub con gpt windows/ubuntu

    - by user100604
    I have an asus k55VM. The problem is that once done the partitions to install windows 7 finalize you and then ubuntu 12.10 the grub not to appear. On having created the table of partitions with gparted I did it in format msdos but then on having installed windows gently accepted me and he says to me that I must do it with format gpt therefore I erase the disc in the assistant of installation and believe a partition of 160 gb Later between with live CD to ubuntu and believe other partitions between which, one ext4 for ubuntu... I install and restart. On having restarted the grub does not go out but if the partitions appear of windows. To seeing if someone helps me am desperate. Thank you very much Tengo un asus k55VM. El problema es que una vez hechas las particiones instalar windows 7 ultimate y luego ubuntu 12.10 no aparece el grub. Al crear la tabla de particiones con gparted lo hice en formato msdos pero luego al instalar windows no me acepta y me dice que debo hacerlo con formato gpt por lo tanto borro el disco en el asistente de instalacion y creo una particion de 160 gb Posteriormente entre con live cd a ubuntu y creo otras particiones entre las cuales, un ext4 para ubuntu... Instalo y reinicio. Al reiniciar no sale el grub pero si aparecen las particiones de windows. A ver si alguien me ayuda estoy desesperado. Muchas gracias

    Read the article

  • Recovering text files in terminal using grep on Mac OS X Snow Leopard

    - by littlejim84
    I foolishly removed some source code from my Mac OS X Snow Leopard machine with rm -rf when doing something with buildout. I want to try and recover these files again. I haven't touched the system since to try and seek an answer. I found this article and it seems like the grep method is the way to go, but when running it on my machine I'm getting 'Resource busy' when trying to run it on the disk. I'm using this command: sudo grep -a -B1000 -A1000 'video_output' /dev/disk0s2 > file.txt Where 'dev/disk0s2' is what came up when I ran df. I get this when running: grep: /dev/disk0s2: Resource busy I'm not an expert with this stuff, I'm trying my best. Please can anyone help me further? I'm on the verge of losing two days of source code work! Thank you

    Read the article

  • Determinism in multiplayer simulation with Box2D, and single computer

    - by Jake
    I wrote a small test car driving multiplayer game with Box2D using TCP server-client communcations. I ran 1 instance of server.exe and 2 instance of client.exe on the same machine that I code and compile the executables. I type inputs (WASD for a simple car movement) into one of the 2 clients and I can get both clients to update the simulation. There are 2 cars in the simulation. As long as the cars do not collide, I get the same identical output on both client.exe. I can run the car(s) around for as long as I could they still update the same. However, if I start to collide the cars, very quickly they go out of sync. My tools: Windows 7, C++, MSVS 2010, Box2D, freeGlut. My Psuedocode: // client.exe void timer(int value) { tcpServer.send(my_inputs); foreach(i = player including myself) inputs[i] = tcpServer.receive(); foreach(i = player including myself) players[i].process(inputs[i]); myb2World.step(33, 8, 6); // Box2D world step simulation foreach(i = player including myself) renderer.render(player[i]); glutTimerFunc(33, timer, 0); } // server.exe void serviceloop { while(all clients alive) { foreach(c = clients) tcpClients[c].receive(&inputs[c]); // send input of each client to all clients foreach(source = clients) { foreach(dest = clients) { tcpClients[dest].send(inputs[source]); } } } } I have read all over the internet and SE the following claims (paraphrased): Box2D is deterministic as long as floating point architecture/implementation is the same. (For any deterministic engine) Determinism is gauranteed if playback of recorded inputs is on the same machine with exe compiled using same compiler and machine. Additionally my server.exe and client.exe gameloop is single thread with blocking socket calls and fixed time step. Question: Can anyone explain what I did wrong to get different Box2D output?

    Read the article

  • Why am I getting permission denied installing Powershell 2.0 on Windows XP (and certain other update

    - by spoulson
    I'm working on a corporate desktop (still) running Windows XP SP2. I recently received a new PC and am reinstalling all my tools. Something is different about this one in that it won't let me install Powershell 2.0. When I do, I get a popup: You do not have permission to update Windows XP. Please contact your system administrator. This also occurs for other installs, like Service Pack 3 and Windows Installer 4.5. I'm aware this PC is under group policy restrictions, but I haven't narrowed down what restriction is preventing this install so that I can have the appropriate support team resolve it. What setting could be responsible for this?

    Read the article

  • How do I fix a garbled screen on a Gateway LT3103u?

    - by paracaudex
    I've been having garbled screen problems on a Gateway LT3103u on Ubuntu for a while. I just did a fresh install of Ubuntu 11.10 and continue to have issues. I installed xubuntu-desktop in case the issues had to do with the sophisticated GNOME graphics. The problem is less bad, but it's still there. After a few minutes of using XFCE, the screen gets garbled. I assume this has something to do with the graphics card, but I don't know how to go about troubleshooting something like this. Where should I start? Update: Here is the description of the VGA card from lspci -vvv: 01:05.0 VGA compatible controller: ATI Technologies Inc RS690M [Radeon X1200 Series] (prog-if 00 [VGA controller]) Subsystem: Acer Incorporated [ALI] Device 028c Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast TAbort- SERR- [disabled] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Kernel driver in use: radeon Kernel modules: radeon Update: Setting GRUB_CMDLINE_LINUX="nomodeset" in /etc/default/grub seems to have fixed it in both Ubuntu and xubuntu-desktop. I will test it for a day or so to see if the problems recur and then post more detail with some links to an explanation. Update 2: It is possible to use this fix for Nvidia card (GTX 260) when graphics is defective after 11.10 upgrade/install? First few restarts was graphic ok, then after few restarts begins suddenly be defective and it stay so. I must returned to 11.04 because this problem and I wait for 12.04. So I hope in this fix.

    Read the article

  • Automatic storing package before installing it on .deb based system?

    - by macias
    The reason I am asking this question is I am concerned about simple rollback (I already read how to find out what packages were installed). So I would like to set global (per entire system) option, that forces system to store each package before installing/updating it. With such workflow, I could update whatever I want, and if for example the newest version of Dolphin would be worse than previous one I could simply go to directory with stored packages and install previous version instead (the previous version is either base version -- on ISO -- or version from previous update). Is there such feature as global option to automatically store each package before install? It have to be guaranteed that no package is updated on-fly, i.e. without being stored before. I am learning LMDE, but answer for any .deb based system would be fine -- Ubuntu, Debian, you name it.

    Read the article

< Previous Page | 571 572 573 574 575 576 577 578 579 580 581 582  | Next Page >