Search Results

Search found 25284 results on 1012 pages for 'test driven'.

Page 576/1012 | < Previous Page | 572 573 574 575 576 577 578 579 580 581 582 583  | Next Page >

  • Installation procedure RAC One Node

    - by rene.kundersma
    Okay, In order to test RAC One Node, on my Oracle VM Laptop, I just: - installed Oracle VM 2.2 - Created two OEL 5.3 images The two images are fully prepared for Oracle 11gr2 Grid Infrastructure and 11gr2 RAC including four shared disks for ASM and private nics. After installation of the Oracle 11gr2 Grid Infrastructure and a "software only installation" of 11gr2 RAC, I installed patch 9004119 as you can see with the opatch lsinv output: This patch has the scripts required to administer RAC One Node, you will see them later. At the moment we have them available for Linux and Solaris. After installation of the patch, I created a RAC database with an instance on one node. Please note that the "Global Database Name" has to be the same as the SID prefix and should be less then or equal to 8 characters: When the database creation is done, first I create a service. This is because RAC One Node needs to be "initialized" each time you add a service: The service configuration details are: After creating the service, a script called raconeinit needs to run from $RDBMS_HOME/bin. This is a script supplied by the patch. I can imagine the next major patch set of 11gr2 has this scripts available by default. The script will configure the database to run on other nodes: After initialization, when you would run raconeinit again, you would see: So, now the configuration is ready and we are ready to run 'Omotion' and move the service around from one node to the other (yes, vm competitor: this is service is available during the migration, nice right ?) . Omotion is started by running Omotion. With Omotion -v you get verbose output: So, during the migration you will see the two instance active: And, after the migration, there is only one instance left on the new node:

    Read the article

  • 8051 MCU debug board function

    - by b-gen-jack-o-neill
    Hi, in school I have written many programs for 8051 compatible CPU. But I never actually knew how our "debug" sets worked. I mean, we test our programs in special sets, which actually allow you to very simply load program to CPU via PC serial port. But I thing you know this musch more better than I. But how it works? I mean, I know there is chip which adjusts signal level from PC serial port to TTL logic, and than connected to serial line of 8051. But thats all I know. Actually even my teacher doesen´t know how it works, since school bought it all. So, I suspect there is some program already running in the 8051 which handles communication and stores your program into memory, am I right? But, how can you make 8051 to process instructions from different location than ROM? Becouse if I am right, you cannot write into ROM memory by any instruction, as well as 8051 can only read instructions from ROM?

    Read the article

  • straight to grub prompt on boot

    - by cheshirekow
    I am very lost. I did a fresh install of Ubuntu 10.04 on a laptop. First reboot was fine. I ran all the recommended upgrades, and now every time I start I get just a grub>_ prompt. No error message, just the prompt, and a little banner at the top saying grub's version and telling me that I have minimal bash style editing. I've tried: 1) Re-installing grub via sudo grub-install sda (There is only one disk with only two partitions, one primary, and one for swap) 2) Changed GRUB_HIDDEN_TIMEOUT=10 GRUB_TIMEOUT=30 GRUB_CMDLINE_LINUX_DEFAULT="rootdelay=90" GRUB_CMDLINE_LINUX="rootdelay=90" in /etc/default/grub. No luck. I can boot with the following: grub> set root=(hd0,1) grub> probe (hd0,1) -u c00fadde-f7e8-45e7-a4da-0235605f756 grub> linux /boot/vmlinuz-2.6.32-21-generic root=UUID=c00fadde-f7e8-45e7-a4da-0235605f756 rootdelay=90 grub> initrd /boot/initrd.img-2.6.32-21-generic grub> boot And then everything seems to be fine from there. From the grub prompt if I try configfile /boot/grub/grub.cfg The screen clears and I get another grub prompt. So, seriously, what could the problem be? edit: Full text of /boot/grub/grub.cfg # # DO NOT EDIT THIS FILE # # It is automatically generated by /usr/sbin/grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then load_env fi set default="0" if [ ${prev_saved_entry} ]; then set saved_entry=${prev_saved_entry} save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z ${boot_once} ]; then saved_entry=${chosen} save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n ${have_grubenv} ]; then if [ -z ${boot_once} ]; then save_env recordfail; fi; fi } insmod ext2 set root='(hd0,1)' search --no-floppy --fs-uuid --set c00fadde-f7e8-45e7-a4da-0235c605f756 if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=640x480 insmod gfxterm insmod vbe if terminal_output gfxterm ; then true ; else # For backward compatibility with versions of terminal.mod that don't # understand terminal_output terminal gfxterm fi fi insmod ext2 set root='(hd0,1)' search --no-floppy --fs-uuid --set c00fadde-f7e8-45e7-a4da-0235c605f756 set locale_dir=($root)/boot/grub/locale set lang=en insmod gettext if [ ${recordfail} = 1 ]; then set timeout=-1 else set timeout=30 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### menuentry 'Ubuntu, with Linux 2.6.32-21-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod ext2 set root='(hd0,1)' search --no-floppy --fs-uuid --set c00fadde-f7e8-45e7-a4da-0235c605f756 linux /boot/vmlinuz-2.6.32-21-generic root=UUID=c00fadde-f7e8-45e7-a4da-0235c605f756 ro rootdelay=90 rootdelay=90 initrd /boot/initrd.img-2.6.32-21-generic } menuentry 'Ubuntu, with Linux 2.6.32-21-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod ext2 set root='(hd0,1)' search --no-floppy --fs-uuid --set c00fadde-f7e8-45e7-a4da-0235c605f756 echo 'Loading Linux 2.6.32-21-generic ...' linux /boot/vmlinuz-2.6.32-21-generic root=UUID=c00fadde-f7e8-45e7-a4da-0235c605f756 ro single rootdelay=90 echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-2.6.32-21-generic } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod ext2 set root='(hd0,1)' search --no-floppy --fs-uuid --set c00fadde-f7e8-45e7-a4da-0235c605f756 linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod ext2 set root='(hd0,1)' search --no-floppy --fs-uuid --set c00fadde-f7e8-45e7-a4da-0235c605f756 linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### if [ ${timeout} != -1 ]; then if sleep --verbose --interruptible 10 ; then set timeout=0 fi fi ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### output of update-grub Generating grub.cfg ... Found linux image: /boot/vmlinuz-2.6.32-21-generic Found initrd image: /boot/initrd.img-2.6.32-21-generic Found memtest86+ image: /boot/memtest86+.bin done contents of /boot total 14280 -rw-r--r-- 1 root root 640617 2010-04-16 09:01 abi-2.6.32-21-generic -rw-r--r-- 1 root root 115847 2010-04-16 09:01 config-2.6.32-21-generic drwxr-xr-x 3 root root 4096 2010-09-08 02:42 grub -rw-r--r-- 1 root root 7968754 2010-09-02 01:49 initrd.img-2.6.32-21-generic -rw-r--r-- 1 root root 160280 2010-03-23 05:37 memtest86+.bin -rw-r--r-- 1 root root 1687378 2010-04-16 09:01 System.map-2.6.32-21-generic -rw-r--r-- 1 root root 1196 2010-04-16 09:03 vmcoreinfo-2.6.32-21-generic -rw-r--r-- 1 root root 4029792 2010-04-16 09:01 vmlinuz-2.6.32-21-generic

    Read the article

  • XenServer 5.5 Error adding additional Server to Ressource Pool

    - by SideShowCoder
    I'm running Citrix XenServer 5.5 as a testsetup, with Openfiler providing Storage via NFS. I tried to setup a Ressource Pool to test Live migration but I'm unable to a my 2. Server to the Pool. It fails after about 10sec with the Error: 4/26/2010 2:54:52 PM Error: Adding server 'u-173-c047.XXX.XXX' to pool 'Portland' - Internal error: Stunnel.Stunnel_error("") I'm kind of lost right now where to look whats causing this, and the Error is not really of any help. Are there logs availible somewhere besides in XenCenter, which might be helpful? Any Ideas what is causing this? Thanks

    Read the article

  • GAC locking problem when running deployment

    - by Kieran
    We have a NANT script that uses msbuild to compile our visual studio solutions and deploys the .dlls into the GAC. This works well on our integration/test servers as part of continuous integration, cruise control uses the NANT scripts and every time the dlls are put into the GAC without problem. On our local development machines, where we use subversion/vs.net etc. for development, frequently certain dlls do not make it to the GAC when we run the build. We think we have narrowed this down to visual studio and/or a plug in locking the GAC or the dlls for some reason. Strangely if we run the build a second time all the dlls make it to the GAC. We have added various iisreset's to the NANT script in the hope of releasing the lock but to no avail. Can anyone suggest a good approach to attack this problem? All the best

    Read the article

  • Whitepaper list for the application framework

    - by Rick Finley
    We're reposting the list of technical whitepapers for the Oracle ETPM framework (called OUAF, Oracle Utilities Application Framework).  These are are available from My Oracle Support at the Doc Id's mentioned below. Some have been updated in the last few months to reflect new advice and new features.  This is reposted from the OUAF blog:  http://blogs.oracle.com/theshortenspot/entry/whitepaper_list_as_at_november Doc Id Document Title Contents 559880.1 ConfigLab Design Guidelines This whitepaper outlines how to design and implement a data management solution using the ConfigLab facility. This whitepaper currently only applies to the following products: Oracle Utilities Customer Care And Billing Oracle Enterprise Taxation Management Oracle Enterprise Taxation and Policy Management           560367.1 Technical Best Practices for Oracle Utilities Application Framework Based Products Whitepaper summarizing common technical best practices used by partners, implementation teams and customers. 560382.1 Performance Troubleshooting Guideline Series A set of whitepapers on tracking performance at each tier in the framework. The individual whitepapers are as follows: Concepts - General Concepts and Performance Troublehooting processes Client Troubleshooting - General troubleshooting of the browser client with common issues and resolutions. Network Troubleshooting - General troubleshooting of the network with common issues and resolutions. Web Application Server Troubleshooting - General troubleshooting of the Web Application Server with common issues and resolutions. Server Troubleshooting - General troubleshooting of the Operating system with common issues and resolutions. Database Troubleshooting - General troubleshooting of the database with common issues and resolutions. Batch Troubleshooting - General troubleshooting of the background processing component of the product with common issues and resolutions. 560401.1 Software Configuration Management Series  A set of whitepapers on how to manage customization (code and data) using the tools provided with the framework. The individual whitepapers are as follows: Concepts - General concepts and introduction. Environment Management - Principles and techniques for creating and managing environments. Version Management - Integration of Version control and version management of configuration items. Release Management - Packaging configuration items into a release. Distribution - Distribution and installation of releases across environments Change Management - Generic change management processes for product implementations. Status Accounting - Status reporting techniques using product facilities. Defect Management - Generic defect management processes for product implementations. Implementing Single Fixes - Discussion on the single fix architecture and how to use it in an implementation. Implementing Service Packs - Discussion on the service packs and how to use them in an implementation. Implementing Upgrades - Discussion on the the upgrade process and common techniques for minimizing the impact of upgrades. 773473.1 Oracle Utilities Application Framework Security Overview A whitepaper summarizing the security facilities in the framework. Now includes references to other Oracle security products supported. 774783.1 LDAP Integration for Oracle Utilities Application Framework based products Updated! A generic whitepaper summarizing how to integrate an external LDAP based security repository with the framework. 789060.1 Oracle Utilities Application Framework Integration Overview A whitepaper summarizing all the various common integration techniques used with the product (with case studies). 799912.1 Single Sign On Integration for Oracle Utilities Application Framework based products A whitepaper outlining a generic process for integrating an SSO product with the framework. 807068.1 Oracle Utilities Application Framework Architecture Guidelines This whitepaper outlines the different variations of architecture that can be considered. Each variation will include advice on configuration and other considerations. 836362.1 Batch Best Practices for Oracle Utilities Application Framework based products This whitepaper outlines the common and best practices implemented by sites all over the world. 856854.1 Technical Best Practices V1 Addendum Addendum to Technical Best Practices for Oracle Utilities Customer Care And Billing V1.x only. 942074.1 XAI Best Practices This whitepaper outlines the common integration tasks and best practices for the Web Services Integration provided by the Oracle Utilities Application Framework. 970785.1 Oracle Identity Manager Integration Overview This whitepaper outlines the principals of the prebuilt intergration between Oracle Utilities Application Framework Based Products and Oracle Identity Manager used to provision user and user group security information. For Fw4.x customers use whitepaper 1375600.1 instead. 1068958.1 Production Environment Configuration Guidelines A whitepaper outlining common production level settings for the products based upon benchmarks and customer feedback. 1177265.1 What's New In Oracle Utilities Application Framework V4? Whitepaper outlining the major changes to the framework since Oracle Utilities Application Framework V2.2. 1290700.1 Database Vault Integration Whitepaper outlining the Database Vault Integration solution provided with Oracle Utilities Application Framework V4.1.0 and above. 1299732.1 BI Publisher Guidelines for Oracle Utilities Application Framework Whitepaper outlining the interface between BI Publisher and the Oracle Utilities Application Framework 1308161.1 Oracle SOA Suite Integration with Oracle Utilities Application Framework based products This whitepaper outlines common design patterns and guidelines for using Oracle SOA Suite with Oracle Utilities Application Framework based products. 1308165.1 MPL Best Practices Oracle Utilities Application Framework This is a guidelines whitepaper for products shipping with the Multi-Purpose Listener. This whitepaper currently only applies to the following products: Oracle Utilities Customer Care And Billing Oracle Enterprise Taxation Management Oracle Enterprise Taxation and Policy Management 1308181.1 Oracle WebLogic JMS Integration with the Oracle Utilities Application Framework This whitepaper covers the native integration between Oracle WebLogic JMS with Oracle Utilities Application Framework using the new Message Driven Bean functionality and real time JMS adapters. 1334558.1 Oracle WebLogic Clustering for Oracle Utilities Application Framework New! This whitepaper covers process for implementing clustering using Oracle WebLogic for Oracle Utilities Application Framework based products. 1359369.1 IBM WebSphere Clustering for Oracle Utilities Application Framework New! This whitepaper covers process for implementing clustering using IBM WebSphere for Oracle Utilities Application Framework based products 1375600.1 Oracle Identity Management Suite Integration with the Oracle Utilities Application Framework New! This whitepaper covers the integration between Oracle Utilities Application Framework and Oracle Identity Management Suite components such as Oracle Identity Manager, Oracle Access Manager, Oracle Adaptive Access Manager, Oracle Internet Directory and Oracle Virtual Directory. 1375615.1 Advanced Security for the Oracle Utilities Application Framework New! This whitepaper covers common security requirements and how to meet those requirements using Oracle Utilities Application Framework native security facilities, security provided with the J2EE Web Application and/or facilities available in Oracle Identity Management Suite.

    Read the article

  • My History with Agile

    - by Robert May
    I’m going to write my history with Agile here.  That way, in future posts, I can refer back to it, instead of typing it out in the post that contains information you may actually want to read.  Note that I’m actually a pretty senior developer, and do lots of technical interviews.  I’m an Agile fan because of the difference it makes in peoples lives and the improvement in quality it brings, and I’ll sacrifice my technological advance to help teams. Management History I started management pretty early in my career, starting with the first job that I ever had.  I actually do NOT have a CS or similar degree.  I have a Bachelor’s of Business Administration with an emphasis in Computer Information Systems. My first management gigs were around call center work and were very schedule oriented.  I didn’t understand the true value of teams, and I’m ashamed to admit, I actually installed a fingerprint scanner as a time clock in this job.  I shudder to think of the impact that I had on the team spirit.  I didn’t even trust them enough to fill out their time cards correctly.  How sad. I was managing nearly 100 people in this position, with the help of a great set of subordinates. I did try to come up with reward programs for the team, but again, didn’t understand the concept of team, so instead of letting the team determine how the rewards should work, I mandated from on high, which isn’t a good thing. I was told that I wasn’t the type that would be a good manager by people whom I respected a lot.  They said it because I was a computer geek, since they don’t understand good management either, but in retrospect, they were right about me then.  I was too green. After my first job, I went on to other jobs and with the exception of one job, I’ve managed people at them all.  The rest of the management story is important for understanding agile, so I’ll save it for my next post. Technical History I’ve been in software development for many, many years.  I technically started programming on a commodore 64 in basic.  I didn’t know that I was programming, but I was sure having fun.  That was followed by batch files, Gorilla hacking (I always had to win), WordPerfect Macro programming and other things that taught me the basics. My first “real” job was with a telephone company, and that’s where I made my first database application in DataEase, wrote my first VBA app and started using real programming tools, like turbo pascal, vb3-vb5, and semi-real tools like RPG and VisualRPG.  I wrote my first web page in 1994, and built my first data driven web page in 1995 using perlDB.  You really can do anything with Perl.  At this time, I also started a Linux based internet service provider that is still in operation today.  One of the people I worked with is now a Microsoft employee building and designing frameworks you probably know well.  Smart guy.  I also built my first ASP applications connecting to Sql Server 6.5, setup Exchange 5.5 for the company, and many other system administration stuff.  I’m a programmer by choice, mostly because I don’t really like PC support. From there, I went on to a large state agency.  I got to see and maintain true waterfall projects.  5 years of maintaining the 200 VB COM+ (MTS, actually) dlls that were used to calculate a single number is a long time.  That was all Microsoft DNS technologies.  SQL Server and VB6 were the tools of choice, although .net started to be a factor near the end of employment.  I did some heavy XML work at this job and even wrote an XSD parser and validator in VB6 that was a shim until MSXML 3.0 came out.  Prior to 3.0, XSD’s weren’t supported, and I didn’t want to write DTDs. Ironically, jobs after this were more generic.  I pretty much settled in on the .net framework and revisions of it.  Lots of WPF, some silverlight, lots of ASP.NET, some SQL Azure, lots of SQL Server, some Oracle, but I don’t think that I was as passionate about development and technologies.  I was more into the management of development.  I like people. Technorati Tags: Agile,history

    Read the article

  • LAMP/TURNKEY LINUX/VIRTUAL BOX: Manipulating Files on a Virtual Machine

    - by aeid
    Hi, I am running Ubuntu 9.10 and I want to install turnkey linux's LAMP server on my machine to test out my code. I installed Turnkey LAMP via VirtualBox and it seems to be working because I can access the http://localhost. My question is: How do I manipulate files via VirtualBox? For example, if I had installed LAMP on my machine (not on a virtual machine), I could easily add/edit/delete files in the var/WWW folder. Where is the equivalent of "WWW" folder on Virtualbox and how can I interface with it? Thanks,

    Read the article

  • Running a powershell script at startup

    - by RandellK02
    I am writing a script to remove a computer from the domain, rename it, then add it back. It works fine when I set the trigger to AtLogOn but when I switch to AtStartUp I run into some issues. I get this error when it restarts to run the first scheduled task: 0x8007051F: There are currently no logon servers available to service the logon request. I suspect the script tries to run with no network connection set up so I tested using the RandomDelay parameter, and it worked like its suppose to. I cant rely on a random delay so I am looking for an alternative. Is there a way to test the network status before the script begins or a way to delay the script a specific amount of time? I am using Register-ScheduledJob provided by Powershell 3.0 Thanks in advance

    Read the article

  • Migrate ASP.Net web site from IIS6 to IIS7

    - by David.Chu.ca
    I have to migrate an ASP.Net web site from IIS6 to IIS7. I tried to copy the all files for a web site from IIS6 (c:\inetpub\wwwroot\MySite) to another box with Windows Server 2008 R2 where IIS7 is the default web server. However, the simply copy seems not working. Should I rebuild the web site for IIS7 or should I make changes on the new box with IIS7 such as web.config? Thanks for the comments. Further investigation I found that http handers seems caused exception: <!--httpHandlers> <add path="Reserved.ReportViewerWebControl.axd" verb="*" type="Microsoft.Reporting.WebForms.HttpHandler, Microsoft.ReportViewer.WebForms, Version=8.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" validate="false"/> </httpHandlers--> After I comment out the above handler in web.config, the web page works fine. This is just my initial test. I am not sure if I should rebuild the web site from source codes or not. If so, do I need to specify for IIS7?

    Read the article

  • Kickstart installation: Unable to read package metadata

    - by yacov
    I'm trying to install a CentOS OS with kickstart using HTTP as the installation source. The kickstart server and the installed server are both running on VMs on the same machine. after the anaconda system installer starts it fails with the following message: I tried installing two different versions of Centos(5.5 and 5.2), and they both pass a CDROM media test the manual installation provides. The only errors on the kickstart server side are some errors in the httpd log I consider irrelevant: [Sat Mar 12 23:25:19 2011] [error] [client 192.168.1.112] File does not exist: /tftpboot/linux-install/platforms/CentOS5.5/images/product.img [Sat Mar 12 23:25:19 2011] [error] [client 192.168.1.112] File does not exist: /tftpboot/linux-install/platforms/CentOS5.5/disc1 I tried searching the internet for days and haven't found any solution... Does anyone have any idea?

    Read the article

  • Manipulating Human Tasks (for testing) by Mark Nelson

    - by JuergenKress
    A few months ago, while working on a BPM migration, I had the need to look at the status of human tasks, and to manipulate them – essentially to just have a single user take random actions on them at some interval, to help drive a set of processes that were being tested. To do this, I wrote a little utility called httool.  It reuses some of the core domain classes from my custom worklist sample (with minimal changes to make it a remote client instead of a local one). I have not got around to documenting it yet, but it is pretty simple and fairly self explanatory.  So I thought I would go ahead and share it with folks, in case anyone is interested in playing with it. You can get the code from my ci-samples repository on java.net: git clone git://java.net/ci4fmw~ci-samples It is in the httool directory. I do plan to get back to this “one day” and enhance it to be more intelligent – target particular task types, update the payload, follow a set of “rules” about what action to take – so that I can use it for more driving more interesting test scenarios.  If anyone is feeling generous with their time, and interested, please feel free to join the java.net project and hack away to your heart’s content. SOA & BPM Partner Community For regular information on Oracle SOA Suite become a member in the SOA & BPM Partner Community for registration please visit www.oracle.com/goto/emea/soa (OPN account required) If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Facebook Wiki Technorati Tags: Mark Nelson,Human Task,SOA Community,Oracle SOA,Oracle BPM,Community,OPN,Jürgen Kress

    Read the article

  • How to create a shared lock blocking an intent exclusive lock

    - by FremenFreedom
    As I understand it, a SELECT statement will place a shared lock on the rows that it will return. While that SELECT is running, if an UPDATE statement comes along and needs to grab an intent exclusive lock then that UPDATE statement will need to wait until the SELECT statement releases its shared locks. I am trying to test this SELECT shared lock thing by doing a BEGIN TRAN and then running a SELECT, not COMMITing, and then running an UPDATE in another session on the exact same row. The UPDATE worked fine -- no lock, no wait. So this must not be a valid way to simulate a shared lock blocking an intent exclusive lock? Can you give me a scenario where I can create a lock with a SELECT that would force an UPDATE to wait? I'm working with SQL Server 2000 and 2005 across a linked server: the table is on the 2005 instance, the select is happening on 2000, and the update is executed from 2005. All in SSMS 2005.

    Read the article

  • ifilter not working with MOSS 2007, cant crawl .pdf

    - by SORRYPROFESSEROFYEARNING
    Installed ifilter and followed the guides: http://msmvps.com/blogs/sundar_narasiman/archive/2008/02/06/configuring-moss-2007-to-search-pdf-documents-install-and-configure-pdf-ifilters.aspx and the accompanying link to the MS hotfix.. I have initiated multiple crawls that don't show any .pdf documents, let alone the contents of the .pdfs (I did constantly upload test documents with real content). In the 'file types' menu of the shared servies, it didn't show the pdf icon as I think it was meant to, it also lists 'pdf' as filetype 'AcroExch.Document', is this correct? Any ideas anyone?

    Read the article

  • Restored Domain Controller does not display any information using dcdiag command

    - by dasko
    I am testing restoring a domain controller from system state backup to different hardware in a non production environment as a sanity check for our restoration procedure. When i run the dcdiag command I get "blank info back" and all that is displayed are two lines as follows: Domain Controller Diagnosis Performing initial setup: and then I am returned to the command prompt. Even when I do dcdiag /v i get the same result. I have double checked the DNS settings and Active Directory works properly. All FSMO roles are being held by this restored Domain Controller. I am able to join test pc's to the domain without issue etc Is this a common issue or is there something that I am missing. Thanks.

    Read the article

  • HUGE EF4 Inheritance Bug

    - by djsolid
    Well maybe not for everyone but for me is definitely really important. That is why I get straight into the point. We have the following model: Which maps to the following database: We are using EF4.0 and we want to load all Burgers including BurgerDetails. So we write the following query: But it fails. The error is : “The ResultType of the specified expression is not compatible with the required type. The expression ResultType is 'Transient.reference[SampleEFDBModel.Food]' but the required type is 'Transient.reference[SampleEFDBModel.Burger]'.Parameter name: arguments[0]”   So in the new version of EF there is no way to eager load data through Navigation Properties with 1-1 relationships defined in subclasses. Here is the relevant Microsoft Connect Issue. It is described through an other example but the result is the same.  Please if you think this is important vote up on Microsoft Connect.   EF 4.0 has many improvements. I am using it since v1 in large-scale projects and this version is faster,produces cleaner sql, more reliable and can be used for complicated business scenarios. That is why I believe this issue should be solved as soon as possible. I understand that release cycles are slow but I am hoping atleast for a hotfix. I also have uploaded the example project so you can test it. Download it from here. If anyone has found any workarounds please post it in the comments section. Thanks!

    Read the article

  • WP7 &ndash; Oh, You Wanted to Develop On Your New Phone? That&rsquo;ll Cost Ya!

    - by D'Arcy Lussier
    Had an interesting Twitter convo today about WP7 development. Question was raised on how to use a WP7 device as the deployment target from within VS.NET. Thinking that this would be an *obvious* question, I replied that you need to set the right value in one of the drop lists in the IDE… I did this, hooked up my device, then tried to run my app, just as a final test that it was as easy as I thought it would be. It wasn’t. So first, your phone can’t be locked, so make sure you unlock it. Also, don’t kill the Zune software when you notice it automagically started – its needed for VS.NET to deploy to your device. Finally, you need to register your device for development. Aiden Caine has a great article on what you need to do for this, but in a nutshell you need to launch the Windows Phone Developer Registration program found in the Windows Phone Developer Tools folder. Now, here’s the catch to all of this: You must have a Windows Phone AppHub account. As in paid account. That’s right – to do development on your actual device, you need to have a $99 ($120 in Canada) AppHub developer membership. Now, I get this – if Microsoft didn’t put this restriction, then they’d be back in Mobile 6.x land where anyone could install whatever app to whoever, whenever, and without any standards being upheld. This is the same thing that Apple does with their marketplace, its not something unprecedented. But, it is something that will be new to the majority of Microsoft developers that have lived without application restrictions for years. Now, if you’re in the US then you have the opportunity to get a rebate on that $99 fee from Microsoft if you publish two apps successfully. You can get more details on this offer here.

    Read the article

  • Problem with testsaslauthd and kerberos5 ("saslauthd internal error")

    - by danorton
    The error message “saslauthd internal error” seems like a catch-all for saslauthd, so I’m not sure if it’s a red herring, but here’s the brief description of my problem: This Kerberos command works fine: $ echo getprivs | kadmin -p username -w password Authenticating as principal username with password. kadmin: getprivs current privileges: GET ADD MODIFY DELETE But this SASL test command fails: $ testsaslauthd -u username -p password 0: NO "authentication failed" saslauthd works fine with "-a sasldb", but the above is with "-a kerberos5" This is the most detail I seem to be able to get from saslauthd: saslauthd[]: auth_krb5: krb5_get_init_creds_password: -1765328353 saslauthd[]: do_auth : auth failure: [user=username] [service=imap] [realm=] [mech=kerberos5] [reason=saslauthd internal error] Kerberos seems happy: krb5kdc[](info): AS_REQ (4 etypes {18 17 16 23}) 127.0.0.1: ISSUE: authtime 1298779891, etypes {rep=18 tkt=18 ses=18}, username at REALM for krbtgt/DOMAIN at REALM I’m running Ubuntu 10.04 (lucid) with the latest updates, namely: Kerberos 5 release 1.8.1 saslauthd 2.1.23 Thanks for any clues.

    Read the article

  • Slide-decks from recent Adelaide SQL Server UG meetings

    - by Rob Farley
    The UK has been well represented this summer at the Adelaide SQL Server User Group, with presentations from Chris Testa-O’Neill (isn’t that the right link? Maybe try this one) and Martin Cairney. The slides are available here and here. I thought I’d particularly mention Martin’s, and how it’s relevant to this month’s T-SQL Tuesday. Martin spoke about Policy-Based Management and the Enterprise Policy Management Framework – something which is remarkably under-used, and yet which can really impact your ability to look after environments. If you have policies set up, then you can easily test each of your SQL instances to see if they are still satisfying a set of policies as defined. Automation (the topic of this month’s T-SQL Tuesday) should mean that your life is made easier, thereby enabling to you to do more. It shouldn’t remove the human element, but should remove (most of) the human errors. People still need to manage the situation, and work out what needs to be done, etc. We haven’t reached a point where computers can replace people, but they are very good at replace the mundaneness and monotony of our jobs. They’ve made our lives more interesting (although many would rightly argue that they have also made our lives more complex) by letting us focus on the stuff that changes. Martin named his talk Put Your Feet Up, which nicely expresses the fact that managing systems shouldn’t be about running around checking things all the time. It must be about having systems in place which tell you when things aren’t going well. It’s never quite as simple as being able to actually put your feet up, but certainly no system should require constant attention. It’s definitely a policy we at LobsterPot adhere to, whether it’s an alert to let us know that an ETL package has run successfully, or a script that generates some code for a report. If things can be automated, it reduces the chance of error, reduces the repetitive nature of work, and in general, keeps both consultants and clients much happier.

    Read the article

  • Talking JavaOne with Rock Star Martijn Verburg

    - by Janice J. Heiss
    JavaOne Rock Stars, conceived in 2005, are the top-rated speakers at each JavaOne Conference. They are awarded by their peers, who, through conference surveys, recognize them for their outstanding sessions and speaking ability. Over the years many of the world’s leading Java developers have been so recognized. Martijn Verburg has, in recent years, established himself as an important mover and shaker in the Java community. His “Diabolical Developer” session at the JavaOne 2011 Conference got people’s attention by identifying some of the worst practices Java developers are prone to engage in. Among other things, he is co-leader and organizer of the thriving London Java User Group (JUG) which has more than 2,500 members, co-represents the London JUG on the Executive Committee of the Java Community Process, and leads the global effort for the Java User Group “Adopt a JSR” and “Adopt OpenJDK” programs. Career highlights include overhauling technology stacks and SDLC practices at Mizuho International, mentoring Oracle on technical community management, and running off shore development teams for AIG. He is currently CTO at jClarity, a start-up focusing on automating optimization for Java/JVM related technologies, and Product Advisor at ZeroTurnaround. He co-authored, with Ben Evans, "The Well-Grounded Java Developer" published by Manning and, as a leading authority on technical team optimization, he is in high demand at major software conferences.Verburg is participating in five sessions, a busy man indeed. Here they are: CON6152 - Modern Software Development Antipatterns (with Ben Evans) UGF10434 - JCP and OpenJDK: Using the JUGs’ “Adopt” Programs in Your Group (with Csaba Toth) BOF4047 - OpenJDK Building and Testing: Case Study—Java User Group OpenJDK Bugathon (with Ben Evans and Cecilia Borg) BOF6283 - 101 Ways to Improve Java: Why Developer Participation Matters (with Bruno Souza and Heather Vancura-Chilson) HOL6500 - Finding and Solving Java Deadlocks (with Heinz Kabutz, Kirk Pepperdine, Ellen Kraffmiller and Henri Tremblay) When I asked Verburg about the biggest mistakes Java developers tend to make, he listed three: A lack of communication -- Software development is far more a social activity than a technical one; most projects fail because of communication issues and social dynamics, not because of a bad technical decision. Sadly, many developers never learn this lesson. No source control -- Developers simply storing code in local filesystems and emailing code in order to integrate Design-driven Design -- The need for some developers to cram every design pattern from the Gang of Four (GoF) book into their source code All of which raises the question: If these practices are so bad, why do developers engage in them? “I've seen a wide gamut of reasons,” said Verburg, who lists them as: * They were never taught at high school/university that their bad habits were harmful.* They weren't mentored in their first professional roles.* They've lost passion for their craft.* They're being deliberately malicious!* They think software development is a technical activity and not a social one.* They think that they'll be able to tidy it up later.A couple of key confusions and misconceptions beset Java developers, according to Verburg. “With Java and the JVM in particular I've seen a couple of trends,” he remarked. “One is that developers think that the JVM is a magic box that will clean up their memory, make their code run fast, as well as make them cups of coffee. The JVM does help in a lot of cases, but bad code can and will still lead to terrible results! The other trend is to try and force Java (the language) to do something it's not very good at, such as rapid web development. So you get a proliferation of overly complex frameworks, libraries and techniques trying to get around the fact that Java is a monolithic, statically typed, compiled, OO environment. It's not a Golden Hammer!”I asked him about the keys to running a good Java User Group. “You need to have a ‘Why,’” he observed. “Many user groups know what they do (typically, events) and how they do it (the logistics), but what really drives users to join your group and to stay is to give them a purpose. For example, within the LJC we constantly talk about the ‘Why,’ which in our case is several whys:* Re-ignite the passion that developers have for their craft* Raise the bar of Java developers in London* We want developers to have a voice in deciding the future of Java* We want to inspire the next generation of tech leaders* To bring the disparate tech groups in London together* So we could learn from each other* We believe that the Java ecosystem forms a cornerstone of our society today -- we want to protect that for the futureLooking ahead to Java 8 Verburg expressed excitement about Lambdas. “I cannot wait for Lambdas,” he enthused. “Brian Goetz and his group are doing a great job, especially given some of the backwards compatibility that they have to maintain. It's going to remove a lot of boiler plate and yet maintain readability, plus enable massive scaling.”Check out Martijn Verburg at JavaOne if you get a chance, and, stay tuned for a longer interview yours truly did with Martijn to be publish on otn/java some time after JavaOne. Originally published on blogs.oracle.com/javaone.

    Read the article

  • Talking JavaOne with Rock Star Martijn Verburg

    - by Janice J. Heiss
    JavaOne Rock Stars, conceived in 2005, are the top-rated speakers at each JavaOne Conference. They are awarded by their peers, who, through conference surveys, recognize them for their outstanding sessions and speaking ability. Over the years many of the world’s leading Java developers have been so recognized. Martijn Verburg has, in recent years, established himself as an important mover and shaker in the Java community. His “Diabolical Developer” session at the JavaOne 2011 Conference got people’s attention by identifying some of the worst practices Java developers are prone to engage in. Among other things, he is co-leader and organizer of the thriving London Java User Group (JUG) which has more than 2,500 members, co-represents the London JUG on the Executive Committee of the Java Community Process, and leads the global effort for the Java User Group “Adopt a JSR” and “Adopt OpenJDK” programs. Career highlights include overhauling technology stacks and SDLC practices at Mizuho International, mentoring Oracle on technical community management, and running off shore development teams for AIG. He is currently CTO at jClarity, a start-up focusing on automating optimization for Java/JVM related technologies, and Product Advisor at ZeroTurnaround. He co-authored, with Ben Evans, "The Well-Grounded Java Developer" published by Manning and, as a leading authority on technical team optimization, he is in high demand at major software conferences.Verburg is participating in five sessions, a busy man indeed. Here they are: CON6152 - Modern Software Development Antipatterns (with Ben Evans) UGF10434 - JCP and OpenJDK: Using the JUGs’ “Adopt” Programs in Your Group (with Csaba Toth) BOF4047 - OpenJDK Building and Testing: Case Study—Java User Group OpenJDK Bugathon (with Ben Evans and Cecilia Borg) BOF6283 - 101 Ways to Improve Java: Why Developer Participation Matters (with Bruno Souza and Heather Vancura-Chilson) HOL6500 - Finding and Solving Java Deadlocks (with Heinz Kabutz, Kirk Pepperdine, Ellen Kraffmiller and Henri Tremblay) When I asked Verburg about the biggest mistakes Java developers tend to make, he listed three: A lack of communication -- Software development is far more a social activity than a technical one; most projects fail because of communication issues and social dynamics, not because of a bad technical decision. Sadly, many developers never learn this lesson. No source control -- Developers simply storing code in local filesystems and emailing code in order to integrate Design-driven Design -- The need for some developers to cram every design pattern from the Gang of Four (GoF) book into their source code All of which raises the question: If these practices are so bad, why do developers engage in them? “I've seen a wide gamut of reasons,” said Verburg, who lists them as: * They were never taught at high school/university that their bad habits were harmful.* They weren't mentored in their first professional roles.* They've lost passion for their craft.* They're being deliberately malicious!* They think software development is a technical activity and not a social one.* They think that they'll be able to tidy it up later.A couple of key confusions and misconceptions beset Java developers, according to Verburg. “With Java and the JVM in particular I've seen a couple of trends,” he remarked. “One is that developers think that the JVM is a magic box that will clean up their memory, make their code run fast, as well as make them cups of coffee. The JVM does help in a lot of cases, but bad code can and will still lead to terrible results! The other trend is to try and force Java (the language) to do something it's not very good at, such as rapid web development. So you get a proliferation of overly complex frameworks, libraries and techniques trying to get around the fact that Java is a monolithic, statically typed, compiled, OO environment. It's not a Golden Hammer!”I asked him about the keys to running a good Java User Group. “You need to have a ‘Why,’” he observed. “Many user groups know what they do (typically, events) and how they do it (the logistics), but what really drives users to join your group and to stay is to give them a purpose. For example, within the LJC we constantly talk about the ‘Why,’ which in our case is several whys:* Re-ignite the passion that developers have for their craft* Raise the bar of Java developers in London* We want developers to have a voice in deciding the future of Java* We want to inspire the next generation of tech leaders* To bring the disparate tech groups in London together* So we could learn from each other* We believe that the Java ecosystem forms a cornerstone of our society today -- we want to protect that for the futureLooking ahead to Java 8 Verburg expressed excitement about Lambdas. “I cannot wait for Lambdas,” he enthused. “Brian Goetz and his group are doing a great job, especially given some of the backwards compatibility that they have to maintain. It's going to remove a lot of boiler plate and yet maintain readability, plus enable massive scaling.”Check out Martijn Verburg at JavaOne if you get a chance, and, stay tuned for a longer interview yours truly did with Martijn to be publish on otn/java some time after JavaOne.

    Read the article

  • Asus Sonic Master on Asus N53SV

    - by David Winchester
    I have read that there's a problem to get the subwoofer working in these laptops. I tried this solution No sound from external subwoofer but I don't how to prove that the subwoofer is properly functioning. I use Pulseaudio equalizer and the bass sound seems to work fine, but when I go to the Sound Settings, I can't move the bar where it says 'Subwoofer' in my sound card option, so I don't know if everything is alright. If someone has a solution I would like to know, because there isn't much information regarding this. By the way, I'm using Ubuntu 12.04 64 bits. Thanks beforehand, Dave EDIT ----------- Possible Solution Well, I will post a solution that worked for me and I think it will help a lot of users. I finally got the subwoofer working. Besides adding in /etc/modprobe.d/alsa-base.conf the line options snd-hda-intel model=asus-mode4 I deleted the lines with load-module module-combine and module-combine-sink in /etc/pulse/default.pa (in the home folder there's also a ~/.pulse/default.pa file, I don't know if it has the lines too) To assure all the channels are working, I think this command tells me that speaker-test -c6 -l1 -twav I use pulseaudio-equalizer and the bass sounds very well when properly adjusted. Also, all the channels seems to work fine and the sound is even better than in Windows (where I don't have an equalizer). I pointed out before a module-combine and module-combine-sink problem, because one day I turned on my laptop and pulseaudio didn't work. So I deleted the lines with that names (don't know if they came by default, maybe I added them sometime when I was trying to fix my speakers). After all this, I can now move the Subwoofer bar in the Sound configuration. Anyways, the Equalizer does a great job and it improves the sound a lot.

    Read the article

  • How to penetrate the QA industry after layoffs, next steps...

    - by Erik
    Briefly, my background is in manual black box testing of websites and applications within the Agile/waterfall context. Over the past four years I was a member of two web development firms' small QA teams dedicated to testing the deployment of websites for national/international non profits, governmental organizations, and for profit business, to name a few: -Brookings Institution -Senate -Tyco Electronics -Blue Cross/Blue Shield -National Geographic -Discover Channel I have a very strong understanding of the: -SDLC -STLC of bugs and website deployment/development -Use Case & Test Case development In March of this year, my last firm downsized and lost my job as a QA tester. I have been networking and doing a very detailed job search, but have had a very difficult time getting my next job within the QA industry, even with my background as a manual black box QA tester in the website development context. My direct question to all of you: What are some ways I can be more competitive and get hired? Options that could get me competitive: Should I go back to school and learn some more 'hard' skills in website development and client side technologies, e.g.: -HTML -CSS -JavaScript Learn programming: -PHP -C# -Ruby -SQL -Python -Perl -?? Get Certified as a QA Tester, there are a countless numbers of programs to become a Certified Tester. Most, if not all jobs, being advertised now require Automated Testing experience, in: -QTP -Loadrunner -Selenium -ETC. Should I learn, Automated testing skills, via a paid course, or teach myself? --Learn scripting languages to understand the automated testing process better? Become a Certified "Project Management Professional" (PMP) to prove to hiring managers that I 'get' the project development life cycle? At the end of the day I need to be competitive and get hired as a QA tester and want to build upon my skills within the QA web development field. How should I do this, without reinventing the wheel? Any help in this regard would be fabulous. Thanks! .erik

    Read the article

  • Getting More Out of UPK

    - by [email protected]
    Are you getting the most out of UPK? Remember the idea of streamlining your content creation efforts? How about the concept of collaboration during development? How are you leveraging the System Process Documents or Test Scripts? Is your training team benefiting from the creation of process documentation? Is UPK linked into the help menu of your application or your even at the browser level (Smart Help)? Many customers underutilize UPK. Some customers just think of UPK as a training creation solution or just for creating documentation. To get the full value of UPK you need to first evaluate how the UPK developer is installed. Single User or Multi User? If you have more than two developers of UPK, then there is a significant benefit from installing UPK in multi user mode. This helps drive collaboration, automatic version control and better facilitation of the workflow and state features with use of customized views for the developers. Has your organization installed Usage Tracking? How are the outputs deployed and for how many applications? If these questions have you thinking about your overall usage of UPK and you see significant improvement by using more of what UPK has to offer, then it could be time for a UPK Health Check. Contact your UPK Sales Consultant to help understand your environment and how to maximize the value of UPK and start getting more out of the product.

    Read the article

  • Custom Profile Provider with Web Deployment Project

    - by Ben Griswold
    I wrote about implementing a custom profile provider inside of your ASP.NET MVC application yesterday. If you haven’t read the article, don’t sweat it.  Most of the stuff I write is rubbish anyway. Since you have joined me today, though, I might as well offer up a little tip: you can run into trouble, like I did, if you enable your custom profile provider inside of an application which is deployed using a Web Deployment Project.  Everything will run great on your local machine and you’ll probably take an early lunch because you got the code running in no time flat and the build server is happy and all tests pass and, gosh, maybe you’ll just cut out early because it is Friday after all.  But then the first user hits the integration machine and, that’s right, yellow screen of death. Lucky you, just as you’re walking out the door, the user kindly sends the exception message and stack trace: Value cannot be null. Parameter name: type Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Stack Trace: [ArgumentNullException: Value cannot be null. Parameter name: type] System.Activator.CreateInstance(Type type, Boolean nonPublic) +2796915 System.Web.Profile.ProfileBase.CreateMyInstance(String username, Boolean isAuthenticated) +76 System.Web.Profile.ProfileBase.Create(String username, Boolean isAuthenticated) +312 User error?  Not this time. Damn! One hour later… you notice the harmless “Treat as library component (remove the App_Code.compiled file)” setting on the Output Assemblies Tab of your Web Deployment Project. You have no idea why, but you uncheck it.  You test and everything works great both locally and on the integration machine.  Application users think you’re the best and you’re still going to catch the last half hour of happy hour.  Happy Friday.

    Read the article

< Previous Page | 572 573 574 575 576 577 578 579 580 581 582 583  | Next Page >