Search Results

Search found 34813 results on 1393 pages for 'im fine'.

Page 577/1393 | < Previous Page | 573 574 575 576 577 578 579 580 581 582 583 584  | Next Page >

• PC runs very slowly for no apparent reason

  - by GalacticCowboy

  I have a Dell Latitude D820 that I've owned for about 2.5 years. It is a Core 2 Duo T7200 2.0GHz, with 2 GB of RAM, an 80 GB hard drive and an NVidia Quadro 120M video card. The computer was purchased in late November of 2006 with XP Pro, and included a free upgrade to Vista Business. (Vista was available on MSDN but not yet via retail, so the Vista Business upgrades weren't shipped until March of '07.) Since we had an MSDN subscription at the time, I installed Vista Ultimate on it pretty much as soon as I got it. It ran happily until sometime in the spring of 2007 when Media Center (which I had never used except to watch DVDs) started throwing some kind of bizarre SQL (CE?) error. This error would pop up at random times just while using the computer. Furthermore, Media Center would no longer start. I never identified the cause of this error. I had the Vista Business upgrade by this time, so I nuked the machine, installed XP and all the drivers, and then the Vista Business upgrade. Again, it ran happily for a few months and then started behaving badly once again. Vista Business doesn't have Media Center, so this exhibited completely unrelated symptoms. For no apparent reason and at fairly random times, the machine would suddenly appear to freeze up or run very slowly. For example, launching a new application window (any app) might take 30-45 seconds to paint fully. However, Task Manager showed very low CPU load, memory, etc. I tried all the normal stuff (chkdsk, defrag, etc.) and ran several diagnostic programs to try to identify any problems, but none found anything. It eventually reached the point that the computer was all but unusable, so I nuked it again and installed XP. This time I decided to stick with XP instead of going to Vista. However, within the past couple of months it has started to exhibit the same symptoms in XP that I used to see in Vista. The computer is still under Dell warranty until December, but so far they aren't any help unless I can identify a specific problem. A friend (partner in a now-dead business) has an identical machine that was purchased at the same time. His machine exhibits none of these symptoms, which leads me to believe it is a hardware issue, but I can't figure out how to identify it. Any ideas? Utilities? Seen something similar? At this point I can't even identify any pattern to the behavior, but would be willing to run a "stress test"-style app for as long as a couple days if I had any hope that it would find something. EDIT July 17 I'm testing jerryjvl's answer regarding the video card, though I'm not sure it fully explains the symptoms yet. This morning I ran a video stress test. The test itself ran fine, but immediately afterward the PC started acting up again. I left ProcExp open and various system processes were consuming 50-60% of the CPU but with no apparent reason. For example, "services.exe" was eating about 40%, but the sum of its child processes wasn't higher than about 5%. I left it alone for several minutes to settle down, and then it was fine again. I used the "video card stability test" from firestone-group.com. Its output isn't very detailed, but it at least exercises the hardware pretty hard. EDIT July 22 Thanks for your excellent suggestions. Here is an update on what I have tried so far. Ran memtest86, SeaTools (Seagate), Hitachi drive fitness test, video card stability test (mentioned above). The video card test was the only one that seemed to produce any results, though it didn't occur during the actual test. I defragged the drive (again...) with JkDefrag I dropped the video card

  Read the article

• nginx server over https using up all available file handles (upd: infinite loop?)

  - by mmr

  Hi all, So I have an nginx server that's working over https with Sinatra. When I try to download a jnlp file in a configuration that works fine over Mongrel and http (no s), the nginx server fails to serve the file with a 504 error. Subsequent checking of the logs states that this error is due to overflowing the available number of file handles, ie, "24: too many open files". Running sudo lsof -p <nginx worker pid> gets me a huge list of files, all looking like: nginx 1771 nobody 11u IPv4 10867997 0t0 TCP localhost:44704->localhost:https (ESTABLISHED) nginx 1771 nobody 12u IPv4 10868113 0t0 TCP localhost:https->localhost:44704 (ESTABLISHED) nginx 1771 nobody 13u IPv4 10868114 0t0 TCP localhost:44705->localhost:https (ESTABLISHED) nginx 1771 nobody 14u IPv4 10868191 0t0 TCP localhost:https->localhost:44705 (ESTABLISHED) nginx 1771 nobody 15u IPv4 10868192 0t0 TCP localhost:44706->localhost:https (ESTABLISHED) nginx 1771 nobody 16u IPv4 10868255 0t0 TCP localhost:https->localhost:44706 (ESTABLISHED) nginx 1771 nobody 17u IPv4 10868256 0t0 TCP localhost:44707->localhost:https (ESTABLISHED) nginx 1771 nobody 18u IPv4 10868330 0t0 TCP localhost:https->localhost:44707 (ESTABLISHED) nginx 1771 nobody 19u IPv4 10868331 0t0 TCP localhost:44708->localhost:https (ESTABLISHED) nginx 1771 nobody 20u IPv4 10868434 0t0 TCP localhost:https->localhost:44708 (ESTABLISHED) Increasing the number of files that can be opened is no help, because then nginx just blows right past that limit. And no wonder, it looks like it's in some kind of loop to pull all available files. Any idea what's going on, and how to fix it? EDIT: nginx 0.7.63, ubuntu linux, sinatra 1.0 EDIT 2: Here's the offending code. It's sinatra serving jnlp, which I finally figured out: get '/uploader' do #read in the launch.jnlp file theJNLP = "" File.open("/launch.jnlp", "r+") do |file| while theTemp = file.gets theJNLP = theJNLP + theTemp end end content_type :jnlp theJNLP end If I serve this with Sinatra via Mongrel and http, everything works fine. If I serve this with Sinatra and nginx via https, I get the above error. All other parts of the website appear to be equivalent. EDIT: I have since upgraded to passenger 2.2.14, ruby 1.9.1, nginx 0.8.40, openssl 1.0.0a, and no change. EDIT: The culprit appears to be infinite redirects due to using SSL. I don't know how to fix this, other than hosting the jnlp file in the root directory of the server (which I'd rather not do, since it limits me to one jnlp-based app at a time). The relevant lines from nginx.conf: # HTTPS server # server { listen 443; server_name MyServer.org root /My/Root/Dir; passenger_enabled on; expires 1d; proxy_set_header X-FORWARDED_PROTO https; proxy_set_header X_FORWARDED_PROTO https;#the almighty google is not clear on which to use location /upload { proxy_pass https://127.0.0.1:443; } } The funny thing about this is, first, I was putting the jnlp into a directory called 'uploader', not 'upload', but that still appeared to trigger the problem, since that proxy_pass directive appeared in the logs. Second, again, moving the jnlp into root avoided the problem, because there wasn't any of this proxying due to ssl. So, how can I avoid the infinite proxy_pass loop in nginx?

  Read the article

• Problem deploying GWT application on apache and tomcat using mod_jk

  - by Colin

  I'm trying to deploy a GWT app on Apache using mod_jk connector. I have compiled the application and tested it on tomcat on the address localhost:8080/loginapp and it works ok. However when I deploy it to apache using mod_jk I get the starter page which gives me a login form but trying to login I get this error 404 Not Found Not Found The requested URL /loginapp/loginapp/login was not found on this server Looking at the apache log files i see this [Thu Jan 13 13:43:17 2011] [error] [client 127.0.0.1] client denied by server configuration: /usr/local/tomcat/webapps/loginapp/WEB-INF/ [Thu Jan 13 13:43:26 2011] [error] [client 127.0.0.1] File does not exist: /usr/local/tomcat/webapps/loginapp/loginapp/login, referer: http://localhost/loginapp/LoginApp.html The mod_jk configurations on my apache2.conf file are as follows LoadModule jk_module /usr/lib/apache2/modules/mod_jk.so JkWorkersFile /etc/apache2/workers.properties JkLogFile /var/log/apache2/mod_jk.log JkLogLevel info JkLogStampFormat "[%a %b %d %H:%M:%S %Y] " JkOptions +ForwardKeySize +ForwardURICompat -ForwardDirectories JkRequestLogFormat "%w %V %T" <IfModule mod_jk.c> Alias /loginapp "/usr/local/tomcat/webapps/loginapp/" <Directory "/usr/local/tomcat/webapps/loginapp/"> Options Indexes +FollowSymLinks AllowOverride None Allow from all </Directory> <Location /*/WEB-INF/*> AllowOverride None deny from all </Location> JkMount /loginapp/*.html loginapp My workers.properties file is as follows workers.tomcat_home=/usr/local/tomcat workers.java_home=/usr/lib/jvm/java-6-sun ps=/ worker.list=loginapp worker.loginapp.type=ajp13 worker.loginapp.host=localhost worker.loginapp.port=8009 worker.loginapp.cachesize=10 worker.loginapp.cache_timeout=600 worker.loginapp.socket_keepalive=1 worker.loginapp.recycle_timeout=300 worker.loginapp.lbfactor=1 And this is my servlet mappings for my app on the application's web.xml <servlet> <servlet-name>loginServlet</servlet-name> <servlet-class>com.example.loginapp.server.LoginServiceImpl</servlet-class> </servlet> <servlet-mapping> <servlet-name>loginServlet</servlet-name> <url-pattern>/loginapp/login</url-pattern> </servlet-mapping> <servlet> <servlet-name>myAppServlet</servlet-name> <servlet-class>com.example.loginapp.server.MyAppServiceImpl</servlet-class> </servlet> <servlet-mapping> <servlet-name>myAppServlet</servlet-name> <url-pattern>/loginapp/mapdata</url-pattern> </servlet-mapping> Ive tried everything and it seems to still elude me. Even tried changing the deny from all directive on the WEBINF folder to allow from all and still it doesnt work. Maybe im missing something. Any help will be highly appreciated.

  Read the article

• All my sites are 403 but the server is running. Errors on startup

  - by Craig

  We gave access to a contractor to install a firewall and somehow while he was doing it he fracked something up. Everything went off-line about 24 hours ago and we are effectively out of business until I solve this and the person who messed up the thing is not returning calls. I found a few errors. First, I'm not a server guy - I can look at log files and normally everything runs fine. All 'services' are running according to 1and1 server monitoring and mail is being delivered just fine. The whole thing was off-line until I (probably stupidly) updated the kernel from 6.2 to 6.3 this morning and I got everything back except the http access. All the domains (~200 of them) are returning a 403 error and nothing is recorded in the access log. On every restart I see this error in the messages log file: init: Failed to spawn ttyS0 main process: unable to execute: No such file or directory and a little later these: kernel: WARNING: at kernel/sched.c:5914 thread_return+0x232/0x79d() (Not tainted) kernel: Hardware name: X9SCL/X9SCM kernel: Modules linked in: xt_iprange iptable_filter ip_tables ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables ipv6 ext4 jbd2 serio_raw i2c_i801 i2c_core sg iTCO_wdt iTCO_vendor_support e1000e ext3 jbd mbcache raid1 sd_mod crc_t10dif ahci dm_mirror dm_region_hash dm_log dm_mod [last unloaded: scsi_wait_scan] kernel: Pid: 367, comm: md3_raid1 Not tainted 2.6.32-220.2.1.el6.x86_64 #1 kernel: Call Trace: kernel: [<ffffffff81069997>] ? warn_slowpath_common+0x87/0xc0 kernel: [<ffffffff810699ea>] ? warn_slowpath_null+0x1a/0x20 kernel: [<ffffffff814eccc5>] ? thread_return+0x232/0x79d kernel: [<ffffffff8126a4d9>] ? cpumask_next_and+0x29/0x50 kernel: [<ffffffff813e9c05>] ? md_super_wait+0x55/0x90 kernel: [<ffffffff81090a10>] ? autoremove_wake_function+0x0/0x40 kernel: [<ffffffff813ebf46>] ? md_update_sb+0x206/0x3f0 kernel: [<ffffffff813ee922>] ? md_check_recovery+0x3f2/0x6d0 kernel: [<ffffffffa005b129>] ? raid1d+0x49/0x1050 [raid1] kernel: [<ffffffff814ed985>] ? schedule_timeout+0x215/0x2e0 kernel: [<ffffffff814ef447>] ? _spin_unlock_irqrestore+0x17/0x20 kernel: [<ffffffff813eb336>] ? md_thread+0x116/0x150 kernel: [<ffffffff81090a10>] ? autoremove_wake_function+0x0/0x40 kernel: [<ffffffff813eb220>] ? md_thread+0x0/0x150 kernel: [<ffffffff810906a6>] ? kthread+0x96/0xa0 kernel: [<ffffffff8100c14a>] ? child_rip+0xa/0x20 kernel: [<ffffffff81090610>] ? kthread+0x0/0xa0 kernel: [<ffffffff8100c140>] ? child_rip+0x0/0x20 And something is wrong with the Named/BIND resulting in the same error for all domains: zone DOMAINEXAMPLE.com/IN: loading from master file DOMAINEXAMPLE.com failed: file not found zone DOMAINEXAMPLE.com/IN: not loaded due to errors. _default/DOMAINEXAMPLE.com/IN: file not found I'm pretty sure this is not enough information to solve the problem, but I'm willing to engage someone who can work this out for me. Any help would be greatly appreciated.

  Read the article

• Ubuntu 14.04, OpenLDAP TLS problems

  - by larsemil

  So i have set up an openldap server using this guide here. It worked fine. But as i want to use sssd i also need TLS to be working for ldap. So i looked into and followed the TLS part of the guide. And i never got any errors and slapd started fine again. BUT. It does not seem to work when i try to use ldap over tls. root@server:~# ldapsearch -x -ZZ -H ldap://83.209.243.253 -b dc=daladevelop,dc=se ldap_start_tls: Protocol error (2) additional info: unsupported extended operation Ganking up the debug level some notches returns some more information: root@server:~# ldapsearch -x -ZZ -H ldap://83.209.243.253 -b dc=daladevelop,dc=se -d 5 ldap_url_parse_ext(ldap://83.209.243.253) ldap_create ldap_url_parse_ext(ldap://83.209.243.253:389/??base) ldap_extended_operation_s ldap_extended_operation ldap_send_initial_request ldap_new_connection 1 1 0 ldap_int_open_connection ldap_connect_to_host: TCP 83.209.243.253:389 ldap_new_socket: 3 ldap_prepare_socket: 3 ldap_connect_to_host: Trying 83.209.243.253:389 ldap_pvt_connect: fd: 3 tm: -1 async: 0 ldap_open_defconn: successful ldap_send_server_request ber_scanf fmt ({it) ber: ber_scanf fmt ({) ber: ber_flush2: 31 bytes to sd 3 ldap_result ld 0x7f25df51e220 msgid 1 wait4msg ld 0x7f25df51e220 msgid 1 (infinite timeout) wait4msg continue ld 0x7f25df51e220 msgid 1 all 1 ** ld 0x7f25df51e220 Connections: * host: 83.209.243.253 port: 389 (default) refcnt: 2 status: Connected last used: Fri Jun 6 08:52:16 2014 ** ld 0x7f25df51e220 Outstanding Requests: * msgid 1, origid 1, status InProgress outstanding referrals 0, parent count 0 ld 0x7f25df51e220 request count 1 (abandoned 0) ** ld 0x7f25df51e220 Response Queue: Empty ld 0x7f25df51e220 response count 0 ldap_chkResponseList ld 0x7f25df51e220 msgid 1 all 1 ldap_chkResponseList returns ld 0x7f25df51e220 NULL ldap_int_select read1msg: ld 0x7f25df51e220 msgid 1 all 1 ber_get_next ber_get_next: tag 0x30 len 42 contents: read1msg: ld 0x7f25df51e220 msgid 1 message type extended-result ber_scanf fmt ({eAA) ber: read1msg: ld 0x7f25df51e220 0 new referrals read1msg: mark request completed, ld 0x7f25df51e220 msgid 1 request done: ld 0x7f25df51e220 msgid 1 res_errno: 2, res_error: <unsupported extended operation>, res_matched: <> ldap_free_request (origid 1, msgid 1) ldap_parse_extended_result ber_scanf fmt ({eAA) ber: ldap_parse_result ber_scanf fmt ({iAA) ber: ber_scanf fmt (}) ber: ldap_msgfree ldap_err2string ldap_start_tls: Protocol error (2) additional info: unsupported extended operation ldap_free_connection 1 1 ldap_send_unbind ber_flush2: 7 bytes to sd 3 ldap_free_connection: actually freed So no good information there neither. In /var/log/syslog i get: Jun 6 08:55:42 master slapd[21383]: conn=1008 fd=23 ACCEPT from IP=83.209.243.253:56440 (IP=0.0.0.0:389) Jun 6 08:55:42 master slapd[21383]: conn=1008 op=0 EXT oid=1.3.6.1.4.1.1466.20037 Jun 6 08:55:42 master slapd[21383]: conn=1008 op=0 do_extended: unsupported operation "1.3.6.1.4.1.1466.20037" Jun 6 08:55:42 master slapd[21383]: conn=1008 op=0 RESULT tag=120 err=2 text=unsupported extended operation Jun 6 08:55:42 master slapd[21383]: conn=1008 op=1 UNBIND Jun 6 08:55:42 master slapd[21383]: conn=1008 fd=23 closed If i portscan the host i get the following: Starting Nmap 6.40 ( http://nmap.org ) at 2014-06-06 08:56 CEST Nmap scan report for h83-209-243-253.static.se.alltele.net (83.209.243.253) Host is up (0.0072s latency). Not shown: 996 closed ports PORT STATE SERVICE 22/tcp open ssh 80/tcp open http 389/tcp open ldap 636/tcp open ldapssl But when i check certs root@master:~# openssl s_client -connect daladevelop.se:636 -showcerts -state CONNECTED(00000003) SSL_connect:before/connect initialization SSL_connect:unknown state 140244859233952:error:140790E5:SSL routines:SSL23_WRITE:ssl handshake failure:s23_lib.c:177: --- no peer certificate available --- No client certificate CA names sent --- SSL handshake has read 0 bytes and written 317 bytes --- New, (NONE), Cipher is (NONE) Secure Renegotiation IS NOT supported Compression: NONE Expansion: NONE --- And i feel like i am clearly out in deep water not knowing at all where to go from here. Anny hints appreciated on what to do or to get better debug logging... EDIT: This is my config slapcated from cn=config and it does not mention at all anything about TLS. I have inserted my certinfo.ldif: root@master:~# cat certinfo.ldif dn: cn=config add: olcTLSCACertificateFile olcTLSCACertificateFile: /etc/ssl/certs/cacert.pem - add: olcTLSCertificateFile olcTLSCertificateFile: /etc/ssl/certs/daladevelop_slapd_cert.pem - add: olcTLSCertificateKeyFile olcTLSCertificateKeyFile: /etc/ssl/private/daladevelop_slapd_key.pem and when doing that i only got this as an answer. root@master:~# sudo ldapmodify -Y EXTERNAL -H ldapi:/// -f certinfo.ldif SASL/EXTERNAL authentication started SASL username: gidNumber=0+uidNumber=0,cn=peercred,cn=external,cn=auth SASL SSF: 0 modifying entry "cn=config" So still no wiser.

  Read the article

• nginx : backend https, proxy_pass shows ip

  - by Vulpo

  I am using nginx as a reverse proxy listening at port 80 (http). I am using proxy_pass to forward requests to backend http and https servers. Everything works fine for my http server but when I try to reach the https server through nginx reverse proxy the ip of the https server is shown in the client's web browser. I want the uri of the nginx server to be shown instead of the https backend server's ip (once again, this works fine with the http server but not for the https server). See this post on the forum Here is my configuration file : server { listen 80; server_name domain1.com; access_log off; root /var/www; if ($request_method !~ ^(GET|HEAD|POST)$ ) { return 444; } location / { proxy_pass http://ipOfHttpServer:port/; } } server { listen 80; server_name domain2.com; access_log off; root /var/www; if ($request_method !~ ^(GET|HEAD|POST)$ ) { return 444; } location / { proxy_pass http://ipOfHttpsServer:port/; proxy_set_header X_FORWARDED_PROTO https; #proxy_set_header Host $http_host; } } When I try the "proxy_set_header Host $http_host" directive and "proxy_set_header Host $host" the web page can't be reached (page not found). But when I comment it, the ip of the https server is shown in the browser (which is bad). Does anyone have an idea ? My other configs files are : proxy_redirect off; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; #proxy_hide_header X-Powered-By; proxy_intercept_errors on; proxy_buffering on; proxy_cache_key "$scheme://$host$request_uri"; proxy_cache_path /var/cache/nginx levels=1:2 keys_zone=cache:10m inactive=7d max_size=700m; user www-data; worker_processes 2; error_log /var/log/nginx/error.log; pid /var/run/nginx.pid; events { worker_connections 1024; } http { include /etc/nginx/mime.types; default_type application/octet-stream; access_log /var/log/nginx/access.log; server_names_hash_bucket_size 64; sendfile off; tcp_nopush on; #keepalive_timeout 0; keepalive_timeout 65; tcp_nodelay on; gzip on; gzip_comp_level 5; gzip_http_version 1.0; gzip_min_length 0; gzip_types text/plain text/html text/css image/x-icon application/x-javascript; gzip_vary on; include /etc/nginx/conf.d/*.conf; include /etc/nginx/sites-enabled/*; } Thanks for your help !

  Read the article

• ubuntu mount iso but some files are unreadable

  - by Chao

  I'm new to Linux and just installed ubuntu 12.04 amd64 this month. I had failed installing Texlive with texlive2012 iso image. I used the recommended command to mount: "mount -t iso9660 -o ro,loop,noauto /your/texlive2012.iso /mnt " But the installer failed to read some file. The iso is fine, I checked the md5. I extracted everything from iso with archive manager, and it installed successfully. So, why mount is not working? Thanks. UPDATE with furius iso mount tool, mount with Fuse, and it installed, with warning: Summary of warning messages during installation: Downloaded ./archive/calligra-type1.tar.xz, size equal, but md5sum differs; downloading again. While mount with Loop, it failed to install. Updated Error message from terminal, mounted with furius iso mount, loop. texlive2012-20120701_iso$ ./install-tl -gui Loading ./tlpkg/texlive.tlpdb Installing TeX Live 2012 from: . Platform: x86_64-linux = 'x86_64 with GNU/Linux' Distribution: inst (compressed) Directory for temporary files: /tmp Installing [0001/2481, time/total: ??:??/??:??]: 12many [3k] Installing [0002/2481, time/total: 00:00/00:00]: 2up [4k] Installing [0003/2481, time/total: 00:00/00:00]: Asana-Math [457k] Installing [0004/2481, time/total: 00:00/00:00]: ESIEEcv [2k] ... Installing [0265/2481, time/total: 00:10/01:09]: calctab [5k] Installing [0266/2481, time/total: 00:10/01:09]: calligra [42k] Installing [0267/2481, time/total: 00:10/01:09]: calligra-type1 [59k] Downloaded ./archive/calligra-type1.tar.xz, size equal, but md5sum differs; downloading again. ./tlpkg/installer/xz/xzdec.x86_64-linux: (stdin): File is corrupt tar: Unexpected EOF in archive tar: rmtlseek not stopped at a record boundary tar: Error is not recoverable: exiting now untar: untarring /home/lichao/ttt/temp/calligra-type1.tar failed (in /home/lichao/ttt/texmf-dist) untarring /home/lichao/ttt/temp/calligra-type1.tar failed, stopping install. Installation failed. Rerunning the installer will try to restart the installation. Or you can restart by running the installer with: install-tl --profile installation.profile [EXTRA-ARGS] ./install-tl: Could not write to install-tl.log, so flushing messages to stderr. Loading ./tlpkg/texlive.tlpdb Installing TeX Live 2012 from: . Platform: x86_64-linux = 'x86_64 with GNU/Linux' Distribution: inst (compressed) Directory for temporary files: /tmp Installer revision: 26794 Database revision: 26935 Installing [0001/2481, time/total: ??:??/??:??]: 12many [3k] Installing [0002/2481, time/total: 00:00/00:00]: 2up [4k] Installing [0003/2481, time/total: 00:00/00:00]: Asana-Math [457k] Installing [0004/2481, time/total: 00:00/00:00]: ESIEEcv [2k] Installing [0005/2481, time/total: 00:00/00:00]: FAQ-en [1k] ... Installing [0262/2481, time/total: 00:10/01:09]: c90 [2k] Installing [0263/2481, time/total: 00:10/01:09]: cachepic [5k] Installing [0264/2481, time/total: 00:10/01:09]: cachepic.x86_64-linux [1k] Installing [0265/2481, time/total: 00:10/01:09]: calctab [5k] Installing [0266/2481, time/total: 00:10/01:09]: calligra [42k] Installing [0267/2481, time/total: 00:10/01:09]: calligra-type1 [59k] Downloaded ./archive/calligra-type1.tar.xz, size equal, but md5sum differs; downloading again. untar: untarring /home/lichao/ttt/temp/calligra-type1.tar failed (in /home/lichao/ttt/texmf-dist) untarring /home/lichao/ttt/temp/calligra-type1.tar failed, stopping install. Installation failed. Rerunning the installer will try to restart the installation. Or you can restart by running the installer with: install-tl --profile installation.profile [EXTRA-ARGS] Segmentation fault (core dumped) I am sure that the iso is fine. I can open it with archive manager and all files are good. But after mounting it, even archive manager failed to open some files (which can be opened when the iso is opened in archive manager).

  Read the article

• How do you splice out a part of an xvid encoded avi file, with ffmpeg? (no problems with other files

  - by yegor

  Im using the following command, which works for most files, except what seems to be xvid encoded ones /usr/bin/ffmpeg -sameq -i file.avi -ss 00:01:00 -t 00:00:30 -ac 2 -r 25 -copyts output.avi So this should basically splice out 30 seconds of video + audio, starting from 1 minute mark. It does START encoding at the 00:01:00 mark but it goes all the way to the end of the file for some reason, ignoring that I want just 30 seconds. The output looks like this. FFmpeg version git-ecc4bdd, Copyright (c) 2000-2010 the FFmpeg developers built on May 31 2010 04:52:24 with gcc 4.4.3 20100127 (Red Hat 4.4.3-4) configuration: --enable-libx264 --enable-libxvid --enable-libmp3lame --enable-libopenjpeg --enable-libfaac --enable-libvorbis --enable-gpl --enable-nonfree --enable-libxvid --enable-pthreads --enable-libfaad --extra-cflags=-fPIC --enable-postproc --enable-libtheora --enable-libvorbis --enable-shared libavutil 50.15. 2 / 50.15. 2 libavcodec 52.67. 0 / 52.67. 0 libavformat 52.62. 0 / 52.62. 0 libavdevice 52. 2. 0 / 52. 2. 0 libavfilter 1.20. 0 / 1.20. 0 libswscale 0.10. 0 / 0.10. 0 libpostproc 51. 2. 0 / 51. 2. 0 [mpeg4 @ 0x17cf770]Invalid and inefficient vfw-avi packed B frames detected Input #0, avi, from 'file.avi': Metadata: ISFT : VirtualDubMod 1.5.10.2 (build 2540/release) Duration: 00:02:00.00, start: 0.000000, bitrate: 1587 kb/s Stream #0.0: Video: mpeg4, yuv420p, 672x368 [PAR 1:1 DAR 42:23], 25 tbr, 25 tbn, 25 tbc Stream #0.1: Audio: ac3, 48000 Hz, 5.1, s16, 448 kb/s File 'lol6.avi' already exists. Overwrite ? [y/N] y Output #0, avi, to 'lol6.avi': Metadata: ISFT : Lavf52.62.0 Stream #0.0: Video: mpeg4, yuv420p, 672x368 [PAR 1:1 DAR 42:23], q=2-31, 200 kb/s, 25 tbn, 25 tbc Stream #0.1: Audio: mp2, 48000 Hz, 2 channels, s16, 64 kb/s Stream mapping: Stream #0.0 -> #0.0 Stream #0.1 -> #0.1 Press [q] to stop encoding [mpeg4 @ 0x17cf770]Invalid and inefficient vfw-avi packed B frames detected [buffer @ 0x184b610]Buffering several frames is not supported. Please consume all available frames before adding a new one. frame= 1501 fps=104 q=0.0 Lsize= 15612kB time=30.02 bitrate=4259.7kbits/s ts/s video:15303kB audio:235kB global headers:0kB muxing overhead 0.482620% if I convert this file to mp4 for example, and then perform the same action, it works perfectly.

  Read the article

• Windows 7, HTTPS WebDav: Asks for password twice and fails. Any workarounds?

  - by AutoDMC

  Howdy. I have a Dav server running with PHP SabreDav (code.google.com/p/sabredav/wiki/Windows) on Cherokee at an HTTPS secured URL. It's set to use https, and uses Digest Authentication. I can log in with multiple browsers and a few third party clients (BitKinex and Java AnyClient can connect and browse as well, caveats below). However, when attempting to log in with Windows 7 (surprise, surprise), it asks for my password twice, then tells me that my folder is invalid. I have verified that the server is using Digest authentication. I've verified multiple times that third party software can connect. I even went out and bought a GoDaddy SSL certificate so my SSL wouldn't be self signed anymore. I've applied the registry hacks here: support.microsoft.com/kb/943280 (Note that the article says the "fix" already exists for Windows 7, I just need magical registry hax to get it to work) I've applied the registry hacks here: support.microsoft.com/kb/941050 I've applied the registry hacks here: support.microsoft.com/kb/841215 (Supposedly allows Basic Auth, which shouldn't apply, but why not?) All to no avail; Windows continues to ask for my password twice, then state that "The folder you entered does not appear to be valid. Please choose another." Try the command line? Sure: I've attempted to access with NET USE "https://dav.example.com/" password /USER:me (System error 59) I've attempted to access with NET USE "https://dav.example.com/" (System error 1790) I've attempted to access with NET USE "https://dav.example.com/subdir/" password /USER:me (System error 59) I've attempted to access with NET USE "https://dav.example.com/subdir/" (System error 1790) For good luck: ping dav.example.com ... works. And again, web browsers can access the share just fine, so can third party tools. Best I can tell at this point is "HAHA, NO WEBDAV FOR YOU ON WINDOWS 7" which would be fine except everyone who will be using this application... uses Windows 7. And most are not as persistent or pugnacious as I am. I feel like I've burned through every random suggestion I've found anywhere in the first 10 pages of Google on every search term I can think of. Any ideas? I need it to be Webdav, I need it to be over HTTPS, and I really do need a method to access it from Windows 7. EXTRA DETAIL: However, the "third party" programs I've tried have either been buggy, incomplete, or have silly ... "glitches." For example, BitKinex seems to fixate on any http error codes sent, so if there's a glitch reading a directory, BAM, that directory is always listed empty. Long directory listings also show up as blank, even though the transfer panel shows that directory listing is still taking place. In any case, BitKinex is useless for development purposes for the reasons above. And besides, I'm building this for people other than myself, people who will want to get this dav share working "the regular way."

  Read the article

• iptables : how to correctly allow incoming and outgoing traffic for certain ports?

  - by Rubytastic

  Im trying to get incoming and outgoing traffic to be enabled on specific ports, because I block everything at the end of the iptables rules. INPUT and FORWARD reject. What would be the appropiate way to open certain ports for all traffic incoming and outgoing? From docs I found below but one has to really define both lines? iptables -A INPUT -i eth0 -p tcp --dport 22 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A OUTPUT -o eth0 -p tcp --sport 22 -m state --state ESTABLISHED -j ACCEPT I try to open ports for xmpp service and some other deamons running on server. Rules: *filter # Allow all loopback (lo0) traffic and drop all traffic to 127/8 that doesn't use lo0 -A INPUT -i lo -j ACCEPT -A INPUT -d 127.0.0.0/8 -j REJECT # Accept all established inbound connections -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT # Allow all outbound traffic - you can modify this to only allow certain traffic -A OUTPUT -j ACCEPT # Allow HTTP # Prevent DDOS attacks (http://blog.bodhizazen.net/linux/prevent-dos-with-iptables/) # Disallow HTTPS -A INPUT -p tcp --dport 80 -m state --state NEW -m limit --limit 50/minute --limit-burst 200 -j ACCEPT -A INPUT -m state --state RELATED,ESTABLISHED -m limit --limit 50/second --limit-burst 50 -j ACCEPT -A INPUT -p tcp --dport 443 -j DROP # Allow SSH connections # The -dport number should be the same port number you set in sshd_config -A INPUT -p tcp -s <myip> --dport ssh -j ACCEPT -A INPUT -p tcp -s <myip> --dport 5984 -j ACCEPT -A INPUT -p tcp --dport ssh -j REJECT # Attempt to block portscans # Anyone who tried to portscan us is locked out for an entire day. -A INPUT -m recent --name portscan --rcheck --seconds 86400 -j DROP -A FORWARD -m recent --name portscan --rcheck --seconds 86400 -j DROP # Once the day has passed, remove them from the portscan list -A INPUT -m recent --name portscan --remove -A FORWARD -m recent --name portscan --remove # These rules add scanners to the portscan list, and log the attempt. -A INPUT -p tcp -m tcp --dport 139 -m recent --name portscan --set -j LOG --log-prefix "Portscan:" -A INPUT -p tcp -m tcp --dport 139 -m recent --name portscan --set -j DROP -A FORWARD -p tcp -m tcp --dport 139 -m recent --name portscan --set -j LOG --log-prefix "Portscan:" -A FORWARD -p tcp -m tcp --dport 139 -m recent --name portscan --set -j DROP # Stop smurf attacks -A INPUT -p icmp -m icmp --icmp-type address-mask-request -j DROP -A INPUT -p icmp -m icmp --icmp-type timestamp-request -j DROP -A INPUT -p icmp -m icmp -j DROP # Drop excessive RST packets to avoid smurf attacks -A INPUT -p tcp -m tcp --tcp-flags RST RST -m limit --limit 2/second --limit-burst 2 -j ACCEPT # Don't allow pings through -A INPUT -p icmp -m icmp --icmp-type 8 -j DROP # Log iptables denied calls -A INPUT -m limit --limit 5/min -j LOG --log-prefix "iptables denied: " --log-level 7 # Reject all other inbound - default deny unless explicitly allowed policy -A INPUT -j REJECT -A FORWARD -j REJECT COMMIT

  Read the article

• File server share access intermittent/slow/machine unstable: win2k8r2

  - by Jack B.

  I have a file server running Win2k8R2 on an older HP DL380G4. It has nothing set up on it other than file sharing. All drivers/firmware/updates installed. The file server is used as a dump for a bunch of test machines - so essentially a lot of small files are being written to it. It was working fine until it started showing the following symptoms: Shares became either very slow/intermittent or could not access them at all. Logging in the the server, you could use it like normal but windows would start freezing and eventually you had to hard reboot it because nothing was responsive. After rebooting, it would work fine for 20min-2hours and then degrade into this broken state again. Some info after investigation: HP Raid Config utility shows the Raid array as functioning properly (RAID5 btw). Event log shows a bunch of DoS attacks from the test machines, saying it has disconnected the connection a. AFAIK (not part of my job) the test machines haven't changed the way they log information to this server or the amount of them hasn't increased. b. Nothing is infected, this server was scanned fully, and the test machines are re-imaged almost daily. Nothing in performance monitor shows as anything being pegged at maximum (CPU/HD/Network/RAM) I installed MS Network Monitor and it is showing a lot of traffic The server was using one gigabit Ethernet connection, I connected the second one as well with the same results. Forgot to add - one of the commonly written to dirs on the share has over 16k subdirs in it, with a crapton of small files within those dirs. Some of the OS instability was slow access to the drive which has this directory - perfmon doesn't show much activity on the HD though so I'm not sure if this crowded dir is the cause. Here is one important fact: I ran into this issue 2-3 months ago, couldn't figure it out, but I had a spare identical machine so I swapped them out (thought it was related to the machine), and now I have the same issue. Also, the computer will be stable if I turn off file sharing. So is the server just getting DoS'd by the test machines? I've never dealt with such an issue. Is instability in the server's OS common when getting DoS'd? Is there anything I can do to confirm this before telling the owners of the test machines to optimize their traffic? (I'm not sure what they'll be able to do). Is there something within Win2k8R2 that can balance the traffic across the two NICs? Any help would be appreciated. Update: Another thought - the drive with the share is RAID5 across 6 SCSI320 300GB HDs. They are near full capacity about 100GB from 1TB left. Could the amount of tiny files could be causing some weirdness with the parity in this array? I think I've read something about this in the past but I'm no expert on RAID.

  Read the article

• Why does my computer run slowly and freeze sometimes?

  - by Brae

  EDIT I disabled sound in the BIOS, rebooted and it hung. I removed the (previously) faulty HDD, rebooted and it hung. I have managed to get my Realtek audio manager open again after its mysterious disappearance. Subsequently my microphone is now working again, to fix it I had to uninstall audio drivers, disable audio in BIOS, install audio drivers, enable audio in BIOS. Access via network (with faulty HDD in) seems to not be triggering hangs at the moment. I think with the sound problem fixed it might play a little nicer, but I think its still going to hang. If it does, then I'm fairly sure its been narrowed down to the mobo. EDIT Pretty convinced my motherboard is the culprit, because nothing else seems to have any obvious problems (bar the hard drive, which the PC still hangs without it being plugged in) So thank you all for helping, once I get more rep ill up a few of the answers. My PC is doing some weird things... Sometimes when I open up a program, lets say Adobe Photoshop, it will load everything normally, nice and quick no problems and I can use it fine. Other times its a little odd, and it loads the program as if it's only using half of the CPU. It's pretty obvious when it does it, normally the loading screen skims past, but when it does this weird load you see it slowly tick though each thing, and the program itself becomes incredibly slow. Even Google Chrome does it sometimes. Yet when I exit and reopen the program without doing anything else, it typically opens fine without lagging. I think this problem is probably a symptom of something bigger, because of other problems I'm having. Random hangs; no matter what I have open or what I'm doing. My PC will sort of freeze up for a few seconds. If music is playing it will either loop the last second or two, or it will buzz. This only lasts for a few seconds then it returns to normal without having to restart. During this time all programs lock up and freeze, and the mouse and keyboard are useless. I am also having a weird issue with my audio jacks, without touching my PC at all, sometimes I will see a popup saying that I have unplugged something or plugged something in, neither of which has actually happened. Pretty sure this is cause by the motherboard. I recently had a 'Pink Screen of Death' (yes pink) which pointed to my audio drivers. The lockups seem to happen with some consistency when someone is accessing my shared files via my home LAN. Which leads me to believe either one of my hard drives is acting up or more likely the controller. One of my drives had a bit of a crash before, I used Spinrite and managed to recover my stuff and now the drive appears to be working okay. This is possibly adding to the problems. My best guess is something has gone wrong with my motherboard, possibly a power issue or a chip has died, I really don't know. So what I would like to know is: Have I have missed some obvious diagnostic to help figure out what it is, or should I just bite the bullet and assume its my motherboard acting up and buy a new system? dxdiag[64-bit] - http://pastebin.com/G30kb2TL PSOD (minidump) - http://pastebin.com/aZsv0H56 HWiNFO64 (system info / specs) - http://pastebin.com/X6h3K8g6

  Read the article

• Rosewill RSV-S5 and it's transferespeeds

  - by DoomStone

  I have just bought a Rosewill RSV-S5, I have installed 5x1,5Tb Western Digital Green disks in it. After that have I created a Raid5 on them all with the software that followed with the hardware. Not the raid it self works fine, but it is SLOW, I can only obtain a maximum of 25 MB/s, and if SABnzbd+ is downloading with 5 MB/s is it having a hard time streaming a normal DIVX (700 mb) movie. Is this normal or is there something wrong? Edit: should be able to handle 3 Gbps = 384 megabytes / second Edit 2: As you can see am I only downloading with 3,76 MB/s and I'm trying to watch V s02e08 (720p), but it is completely unwatchable, as I can see 30 sec, and the it buffers for 20 sec. Edit: Other information there might be required I'm running Windows Server 2008 R2, optimized for program performance. Windows is installed on a 60GB SSD. I have a 50 Mb/s internet connection and a 1 Gb/s LAN, all connected with Cat6 Ethernet cables. The MCE is using a Gigabyte EP35C-DS3R motherboard with 2 GB DDR2 ram. Edit 3: I have used chunk sizes for 128 KB Edit 4: I found this on newegg Pros: Enclosure for 5x2TB hard drive is fine. This is basically a rebranded San Digital TR5M-B product. For support Rosewill tells you to contact San Digital. No direct support from Silicon Image for the computer raid card. Cons: Includes computer Silicon Image 3132 raid card, extremely slow raid 5 write (our tests ~10MB/s). Compare to regular internal local drive write 30-60MB/s. We basically dumped the Sil3132 card and replaced with High Point RocketRaid 622 card for extra $69.99. Note for RR622, turn off ECRC (end to end CRC check) for card to work on IBM xserver. What took 12hrs to copy now took 2-3hrs. San Digital realized the problem and has the newer model TR5M-BP TowerRaid Plus that comes with High Point RocketRaid 622 card. Rosewill should discontinue this product and go with TR5M-BP. Could not get Silicon Image raid management software to work with complicated 2008R2 server with 10 NICs, application doesn't know how to talk to localhost port with all those NICs. No updates from Silicon Image and support from San Digital ignored. Gave up on Sil3132 card. Save yourself from a lot of headaches, get the RR622 card too if you are going to buy this product. Other Thoughts: The newer model is TR5M-BP TowerRaid Plus, comes with High Point RocketRaid 622 raid card for the PC instead of Silicon Image Sil3132. According to San Digital, raid 5 performance for Sil3132 read 80MB/s write 19MB/s, and RR622 read 154MB/s write 149MB/s. Our RR622 tests gave (8TB raid 5) write ~80-110MB/s copying 40GB file took 8mins. So I have now ordered a HighPoint RocketRAID 622 2P ext SATA III and hopes that it will solve my problems.

  Read the article

• BSOD Code 16, artifacts all over the place (gtx 260)

  - by belinea

  I have a following, quite dated rig E8400 Core 2 Duo cpu Intel Dragontail Peak DP35DP motherboard on Intel Bearlake P35 chipset 4GB ram Geforce 260gtx Corsair 650W PSU Windows 7 64 bit The following things has happened in the last few days. I first decided to update my Nvidia drivers to the latest version. That was 4 days ago. PC worked fine for 2 days and I was able to play few games as well without any problems. Then 2 days ago a first crash happened while playing the new XCOM game. BSOD code 16. Just the blue screen, no artifacts. PC rebooted and worked well again, I continued playing this game for another 2 hours and went to sleep. Next evening I tried to play some BF3 multiplayer (use to play on LOW settings). Approx. 10 minutes into the game red/pink-ish artifacts appeared on the screen and game quit to desktop. Restarted the game and another 3-4 minutes afterwards another crash to desktop but this time followed shortly by BSOD Code 16. From that moment I started to seeing artifacts on random startups, including Windows loading screen and the BIOS itself. Windows would still load but soon enough it would BSOD on a simple task like opening a Internet browser. Today I get tons of artifacts (little small red dashes all over the screen) on BIOS, loading screen, normal Windows mode as well as safe mode. I suspect it wouldn't be drivers but I tried removing and sweeping them entirely in the safe mode. PC would still start with artifacts all over the place but would load the normal mode, just without the driver, in the default lowest resolution. As soon as proper Nvidia drivers are installed though and PC rebooted, Windows doesn't load at all as BSOD now appears on loading screen. However, again, if I go to safe mode and remove drivers, normal mode launches fine. So obviously crash happens only on high resolution. I opened my machine this morning and gave it a proper cleaning even though it wasn't heavily dusted. It didn't help and number of artifacts seems to increase with every PC restart. I write these words in safe mode, which works, but I have to look through all the red dots and dashes. I don't have built in GPU chipset so I can't try removing my Geforce card nor can I borrow A GPU from anyone else. What are my options? I was looking into getting a completely new rig around Christmas so I'm not freaking out about this. If everything points to hardware issue I may simply decide to get the new machine earlier and don't bother with fixing this one. However it would be great to learn more if this is indeed situation that has slim chances of getting sorted. I realize BSOD Code 16 is rather popular topic online but every story seems a bit different and there can be number of issues with it. Hence a new thread.

  Read the article

• Installing .NET application on IIS 7.5 issues

  - by Juw

  Really need some help here. I am at a loss. I am trying to install a webservice that some other guy wrote in .NET. I have some basic IIS understanding. The webservice works just fine on my dev computer. But now i try to move the webservice to a production server and bad things happens. The webservice has been located in C:\inetpub\wwwroot\ dir on the dev server. But on this production server it is to be located in D:\services\ I have managed to install an application on the production server and everything seems fine and dandy. But when i "Test Settings" in the initial setup i get "Invalid application path" error. But i can just close it down and still install it. But when i try to access the webservice with: http://myserver.com/webservice/GetData nothing happens. Just a blank page and when i check the response headers...500 error. I don´t know what is going on here or where the problem is. I post the config file here so someone hopefully might notice something odd. Thanx in advance! EDIT: The config file is from my dev server. I just copied it to my production server...but that obviously didn´t work :-) UPDATE: I noticed that my dev server run in an Application pool with Net 4 and in "classic" "mode". On the production server it was in NET 4 but in "integrated" mode. So i changed it to "classic". I still get a blank page. But checking the log will output this: 2012-10-03 14:57:00 ip removed GET /boo/GetData - 80 - ip removed Mozilla/5.0+(Windows+NT+6.1;+WOW64;+rv:15.0)+Gecko/20100101+Firefox/15.0.1 404 2 1260 203 <?xml version="1.0" encoding="UTF-8"?> <configuration> <system.web> <identity impersonate="true" /> <!-- Impersonate NT AUTHORITY/IUSR --> <compilation targetFramework="4.0"> <assemblies> <add assembly="System.Data.Entity, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b7735c561131e089" /> </assemblies> </compilation> <pages controlRenderingCompatibilityVersion="3.5" clientIDMode="AutoID" /> </system.web> <system.webServer> <modules runAllManagedModulesForAllRequests="true" /> <httpErrors existingResponse="PassThrough" /> <httpProtocol> <customHeaders> <add name="Access-Control-Allow-Origin" value="*" /> </customHeaders> </httpProtocol> <directoryBrowse enabled="false" /> </system.webServer> <system.serviceModel> <serviceHostingEnvironment aspNetCompatibilityEnabled="true" /> <standardEndpoints> <webHttpEndpoint> <!-- Configure the WCF REST service base address via the global.asax.cs file and the default endpoint via the attributes on the <standardEndpoint> element below --> <standardEndpoint name="" helpEnabled="true" automaticFormatSelectionEnabled="true" /> </webHttpEndpoint> </standardEndpoints> </system.serviceModel> <connectionStrings> <add name="Entities" connectionString="metadata=res://*/DataModel.csdl|res://*/DataModel.ssdl|res://*/DataModel.msl;provider=System.Data.SqlClient;provider connection string=&quot;data source=someip;initial catalog=db_90;User ID=user1;Password=access2;multipleactiveresultsets=True;App=EntityFramework&quot;" providerName="System.Data.EntityClient" /> </connectionStrings> </configuration>

  Read the article

• How do you splice out a part of an xvid encoded avi file, with ffmpeg? (no problems with other files)

  - by user11955

  Im using the following command, which works for most files, except what seems to be xvid encoded ones /usr/bin/ffmpeg -sameq -i file.avi -ss 00:01:00 -t 00:00:30 -ac 2 -r 25 -copyts output.avi So this should basically splice out 30 seconds of video + audio, starting from 1 minute mark. It does START encoding at the 00:01:00 mark but it goes all the way to the end of the file for some reason, ignoring that I want just 30 seconds. The output looks like this. FFmpeg version git-ecc4bdd, Copyright (c) 2000-2010 the FFmpeg developers built on May 31 2010 04:52:24 with gcc 4.4.3 20100127 (Red Hat 4.4.3-4) configuration: --enable-libx264 --enable-libxvid --enable-libmp3lame --enable-libopenjpeg --enable-libfaac --enable-libvorbis --enable-gpl --enable-nonfree --enable-libxvid --enable-pthreads --enable-libfaad --extra-cflags=-fPIC --enable-postproc --enable-libtheora --enable-libvorbis --enable-shared libavutil 50.15. 2 / 50.15. 2 libavcodec 52.67. 0 / 52.67. 0 libavformat 52.62. 0 / 52.62. 0 libavdevice 52. 2. 0 / 52. 2. 0 libavfilter 1.20. 0 / 1.20. 0 libswscale 0.10. 0 / 0.10. 0 libpostproc 51. 2. 0 / 51. 2. 0 [mpeg4 @ 0x17cf770]Invalid and inefficient vfw-avi packed B frames detected Input #0, avi, from 'file.avi': Metadata: ISFT : VirtualDubMod 1.5.10.2 (build 2540/release) Duration: 00:02:00.00, start: 0.000000, bitrate: 1587 kb/s Stream #0.0: Video: mpeg4, yuv420p, 672x368 [PAR 1:1 DAR 42:23], 25 tbr, 25 tbn, 25 tbc Stream #0.1: Audio: ac3, 48000 Hz, 5.1, s16, 448 kb/s File 'lol6.avi' already exists. Overwrite ? [y/N] y Output #0, avi, to 'lol6.avi': Metadata: ISFT : Lavf52.62.0 Stream #0.0: Video: mpeg4, yuv420p, 672x368 [PAR 1:1 DAR 42:23], q=2-31, 200 kb/s, 25 tbn, 25 tbc Stream #0.1: Audio: mp2, 48000 Hz, 2 channels, s16, 64 kb/s Stream mapping: Stream #0.0 -> #0.0 Stream #0.1 -> #0.1 Press [q] to stop encoding [mpeg4 @ 0x17cf770]Invalid and inefficient vfw-avi packed B frames detected [buffer @ 0x184b610]Buffering several frames is not supported. Please consume all available frames before adding a new one. frame= 1501 fps=104 q=0.0 Lsize= 15612kB time=30.02 bitrate=4259.7kbits/s ts/s video:15303kB audio:235kB global headers:0kB muxing overhead 0.482620% if I convert this file to mp4 for example, and then perform the same action, it works perfectly.

  Read the article

• How can I make subversion reset the stored passwords/users and remember my authentication credential

  - by NicDumZ

  Hello folks! Background: I used to have everything working just fine on my fresh install: $ svn co https://domain:443/ test1 Error validating server certificate for 'https://domain:443': - The certificate is not issued by a trusted authority. Use the fingerprint to validate the certificate manually! Certificate information: - Hostname: **REMOVED** - Valid: **REMOVED** - Issuer: **REMOVED** - Fingerprint: **checked with issuer and REMOVED** (R)eject, accept (t)emporarily or accept (p)ermanently? p Authentication realm: <https://domain:443> Subversion repository Password for 'nicdumz-machine-hostname': Authentication realm: <https://domain:443> Subversion repository Username: nicdumz Password for 'nicdumz': # proceeds to checkout correctly $ svn co https://domain:443/ test2 # checkouts nicely, without asking for my password. At some point I needed to commit stuff using a different account. So I did that $ svn ci --username other.user Authentication realm: <https://domain:443> Subversion repository Password for 'other.user': # works fine But since then, everytime I want to commit as 'nicdumz' (default user, all repos have been checked-out with that user), it prompts me for my password: $ svn ci Authentication realm: <https://domain:443> Subversion repository Password for 'nicdumz': Hey come on, why :) The same happens if I want a fresh checkout, since read-access is also protected. So I tried fixing the issue by myself. I read around that ~/.subversion/auth was storing credentials, so I removed it from the way: $ cd ~/.subversion $ mv auth oldauth $ mkdir auth It seemed to work at first, because svn had forgotten about certificate validation: $ svn co https://domain:443/ test3 Error validating server certificate for 'https://domain:443': - The certificate is not issued by a trusted authority. Use the fingerprint to validate the certificate manually! Certificate information: - Hostname: **REMOVED** - Valid: **REMOVED** - Issuer: **REMOVED** - Fingerprint: **checked with issuer and REMOVED** (R)eject, accept (t)emporarily or accept (p)ermanently? p Authentication realm: <https://domain:443> Subversion repository Password for 'nicdumz-machine-hostname': Authentication realm: <https://domain:443> Subversion repository Username: nicdumz Password for 'nicdumz': # proceeds to checkout correctly $ svn up Authentication realm: <https://domain:443> Subversion repository Password for 'nicdumz': What? how is this happening? If you have suggestions to investigate more about the behaviour, I am very interested. If I'm correct, there is no way to do a verbose svn up or anything of the like, so I'm not sure should I go for investigation. Oh, and for what it's worth: $ svn --version svn, version 1.6.6 (r40053) compiled Oct 26 2009, 06:19:08 Copyright (C) 2000-2009 CollabNet. Subversion is open source software, see http://subversion.tigris.org/ This product includes software developed by CollabNet (http://www.Collab.Net/). The following repository access (RA) modules are available: * ra_neon : Module for accessing a repository via WebDAV protocol using Neon. - handles 'http' scheme - handles 'https' scheme * ra_svn : Module for accessing a repository using the svn network protocol. - with Cyrus SASL authentication - handles 'svn' scheme * ra_local : Module for accessing a repository on local disk. - handles 'file' scheme * ra_serf : Module for accessing a repository via WebDAV protocol using serf. - handles 'http' scheme - handles 'https' scheme

  Read the article

• can't send with postfix but I can whith one user

  - by CvR_XX

  I have a postfix and dovecot server but when i try to send an email i get an time -out. Im trying to send with the email [email protected]. A telnet session isn't helping much ether. I get a blank screen. Local it's working fine. My smtp service is running on treadity.com:25. The strange thing is that the logs are completely empty with any info regarding sending emails. Receiving is working alright. Another strange thing is that i've send some message's and that it worked. But that is only with one email. I can still send from that account but other emails are failing any idea's? config file: # See /usr/share/postfix/main.cf.dist for a commented, more complete version # Debian specific: Specifying a file name will cause the first # line of that file to be used as the name. The Debian default # is /etc/mailname. #myorigin = /etc/mailname smtpd_banner = $myhostname ESMTP $mail_name (Debian/GNU) biff = no # appending .domain is the MUA's job. append_dot_mydomain = no # Uncomment the next line to generate "delayed mail" warnings #delay_warning_time = 4h readme_directory = no # TLS parameters #smtpd_tls_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem #smtpd_tls_key_file=/etc/ssl/private/ssl-cert-snakeoil.key #smtpd_use_tls=yes #smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache #smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtpd_tls_cert_file=/etc/ssl/certs/dovecot.pem smtpd_tls_key_file=/etc/ssl/private/dovecot.pem smtpd_use_tls=yes # See /usr/share/postfix/main.cf.dist for a commented, more complete version # Debian specific: Specifying a file name will cause the first # line of that file to be used as the name. The Debian default # is /etc/mailname. #myorigin = /etc/mailname smtpd_banner = $myhostname ESMTP $mail_name (Debian/GNU) biff = no # appending .domain is the MUA's job. append_dot_mydomain = no # Uncomment the next line to generate "delayed mail" warnings #delay_warning_time = 4h readme_directory = no # TLS parameters #smtpd_tls_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem #smtpd_tls_key_file=/etc/ssl/private/ssl-cert-snakeoil.key #smtpd_use_tls=yes #smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache #smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtpd_tls_cert_file=/etc/ssl/certs/dovecot.pem smtpd_tls_key_file=/etc/ssl/private/dovecot.pem smtpd_use_tls=yes # See /usr/share/postfix/main.cf.dist for a commented, more complete version # Debian specific: Specifying a file name will cause the first # line of that file to be used as the name. The Debian default # is /etc/mailname. #myorigin = /etc/mailname smtpd_banner = $myhostname ESMTP $mail_name (Debian/GNU) biff = no # appending .domain is the MUA's job. append_dot_mydomain = no # Uncomment the next line to generate "delayed mail" warnings #delay_warning_time = 4h readme_directory = no # TLS parameters #smtpd_tls_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem #smtpd_tls_key_file=/etc/ssl/private/ssl-cert-snakeoil.key #smtpd_use_tls=yes #smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache #smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtpd_tls_cert_file=/etc/ssl/certs/dovecot.pem smtpd_tls_key_file=/etc/ssl/private/dovecot.pem smtpd_use_tls=yes smtpd_tls_auth_only = yes #Enabling SMTP for authenticated users, and handing off authentication to Dovecot smtpd_sasl_type = dovecot smtpd_sasl_path = private/auth smtpd_sasl_auth_enable = yes 1,1 Top

  Read the article

• My 2009 MacBook Logic board failed - options to proceed and how difficult?

  - by user181061

  Scannerz just gave my MacBook logic board a big fat F! I upgraded from Snow Leopard to Mountain Lion about 3 weeks ago. The system was running short of memory so I upgraded it. The system was running fine for about 2 weeks. Yesterday the thing started acting erratic. A lot of spinning beach balls, delays, and then some errors saying files couldn't be read to or from the drive. I figured the drive was going because the system is over 3 years old. I ran Scannerz on it and it indicated a lot of errors and irregularities. I rescanned it in cursory mode, and none of them were repeatable, just showing up all over the place in different regions of the scan. I went through the docs and they implied either an I/O cable was bad, a connection was damaged, or the logic board was bad. I tossed on my backup of Snow Leopard that I cloned from the original hard drive because I figured Mountain Lion was to blame and booted from the USB drive with the clone on it. It wasn't. I performed scans on every single port, and errors and irregularities that couldn't be repeated were showing up on every single one of them. I then, for kicks, put a CD into the CD player. Scannerz doesn't test optical drives but I figured surely that will work. No it won't. More spinning beach balls and messages telling me it can't be read. It was working fine 3 days ago. I know a lot of people don't like MacBook's, but mine's been great, at least until now. It was working great even with Mountain Lion after the upgrade. The system is a mid-2009 MacBook. In my opinion, it's a complete waste to toss this system. The display is too good, the keyboard works great, and it still looks good, plus this type of MacBook still uses the FireWire 400 port and I use that for Time Machine backups. I've tried reseating the RAM, it didn't do anything. I shut the system down and put in the old RAM, booted to Snow Leopard, and the problems persist. Here are my questions: The Scannerz documentation somewhere said something about the Airport card not being seated properly, but when I go to iFixit, it's apparent, at least I think it's apparent, that this isn't a slot type Airport card that the user can easily install or remove. If the cables or connections to the Airport card are bad, could they be causing this problem. How about any other connections that can be intermittent, failing or erratic? Any type of resets that I could possibly do to get rid of this? For any of those that have replaced a logic board on a MacBook, if this really is the culprit, are there any "gotcha's" I need to be aware of? As an FYI, I replaced the hard drive on an old iBook @500MHz that I had a long time ago, and I replaced the drive on a 1.33GHz PowerBook about 6 years ago. You have to be careful, but using some of the info on web sites like iFixit it's not that hard. Time consuming, but not that hard. The Intel based MacBook's to me look like they're easier to service than either of those. I'm thinking about getting a unit off of eBay that matches mine but has something else wrong with it, like a busted display. I REFUSE to buy a new system. A guy at my office has a 2007 Mac Pro and he can't upgrade to Mountain Lion because his system is "obsoleted." That's ridiculous. If you pay nearly $7,500 for a system it shouldn't be trash just because Apple decides they don't have enough money (sorry for the soap box, but it's true, IMO!) Any input is appreciated.

  Read the article

• Setting up Virtual Hosts with Apache on Windows 2008 server for multiple sites. Complicated setup, including subversion

  - by Roeland

  I am setting up apache on my windows 2008 server at my home. It will serve 2 functions. Subversion hosting to allow me and some others to manage company documents with version control Local website hosting for web development. Will need to run several websites since I generally work on more then one site at a time. Heres what I have done so far. I set up subversion and apache 2.2 using some walk troughs. I changed the default port to 1337. (im a nerd) Using dyndns.com I created a domain to forward to my home ip which is dynamic. ( company.gotdns.org) I then went into my DNS for my company.com and added a record to point repo.company.com to company.gotdns.org At this point people who need access to my file repository can access by going to repo.company.com/repo which is good so far. My question comes on the next step, setting up virtual hosts with apache. Ideally I would like to have my local website be viewable by some others in the company from their homes. So, say I am working on site1, I would like to have them be able to view this by going site1.roeland.bythepixel.com. At the same time, I would like to have site10.wouter.bythepixel.com go to his local setup for site10. What I have done for this: I went into my DNS for company.com and added a record to point roeland.company.com to company.gotdns.org (which translates to my ip). I added code to my httpd-vhosts.conf (listed at bottom) I added code to my host file (listed at bottom) Hah, so of course this doenst work as excepted.. going to site1.roeland.bythepixel.com doesnt bring up my test1 site. Could anyone point me where I may be going wrong? Thanks! hosts: 127.0.0.1 localhost 127.0.0.1 sensenich.roeland.bythepixel.com ::1 localhost httpd-vhosts.conf: <VirtualHost *:80> ServerAdmin [email protected] DocumentRoot "F:/Current Projects/sensenich.com" ServerName sensenich.roeland.bythepixel.com ErrorLog "logs/sensenich.roeland.bythepixel.com-error.log" CustomLog "logs/sensenich.roeland.bythepixel.com-access.log" common </VirtualHost>

  Read the article

• File server share access intermittent/slow/machine unstable: win2k8r2

  - by Jack B.

  I have a file server running Win2k8R2 on an older HP DL380G4. It has nothing set up on it other than file sharing. All drivers/firmware/updates installed. The file server is used as a dump for a bunch of test machines - so essentially a lot of small files are being written to it. It was working fine until it started showing the following symptoms: Shares became either very slow/intermittent or could not access them at all. Logging in the the server, you could use it like normal but windows would start freezing and eventually you had to hard reboot it because nothing was responsive. After rebooting, it would work fine for 20min-2hours and then degrade into this broken state again. Some info after investigation: HP Raid Config utility shows the Raid array as functioning properly (RAID5 btw). Event log shows a bunch of DoS attacks from the test machines, saying it has disconnected the connection a. AFAIK (not part of my job) the test machines haven't changed the way they log information to this server or the amount of them hasn't increased. b. Nothing is infected, this server was scanned fully, and the test machines are re-imaged almost daily. Nothing in performance monitor shows as anything being pegged at maximum (CPU/HD/Network/RAM) I installed MS Network Monitor and it is showing a lot of traffic The server was using one gigabit Ethernet connection, I connected the second one as well with the same results. Forgot to add - one of the commonly written to dirs on the share has over 16k subdirs in it, with a crapton of small files within those dirs. Some of the OS instability was slow access to the drive which has this directory - perfmon doesn't show much activity on the HD though so I'm not sure if this crowded dir is the cause. Here is one important fact: I ran into this issue 2-3 months ago, couldn't figure it out, but I had a spare identical machine so I swapped them out (thought it was related to the machine), and now I have the same issue. Also, the computer will be stable if I turn off file sharing. So is the server just getting DoS'd by the test machines? I've never dealt with such an issue. Is instability in the server's OS common when getting DoS'd? Is there anything I can do to confirm this before telling the owners of the test machines to optimize their traffic? (I'm not sure what they'll be able to do). Is there something within Win2k8R2 that can balance the traffic across the two NICs? Any help would be appreciated. Update: Another thought - the drive with the share is RAID5 across 6 SCSI320 300GB HDs. They are near full capacity about 100GB from 1TB left. Could the amount of tiny files could be causing some weirdness with the parity in this array? I think I've read something about this in the past but I'm no expert on RAID.

  Read the article

• Mod_Rewrite w Apache mod_jrun22.so & ColdFusion 9 on cPanel

  - by Eddie B

  How can I utilize mod_rewrite at either the httpd.conf level or per-directory level when mod_jrun22 seems to have short-stopped the rewrite process for ColdFusion pages? I have a ColdFusion 9 based site running on Centos 5.8 w cPanel. cPanel uses EasyApache 3 to manage virtual host containers and as such the conf for mod_jrun22.so, /usr/local/apache/conf/includes/pre_main_global.conf, is loaded prior to the main httpd.conf with the domain specific rules for the container. My assertion is that .cfm pages are failing to be rewritten due to the mod_jk22.so module having priority in the directive chain. To note, I also have a WordPress blog in the site where the rewrites appear to be working fine. For example the following code to remove the index file works fine for php and fails with cfm ... .htaccess under /blog/ : This works Options -Indexes -Multiviews <IfModule mod_rewrite.c> RewriteEngine On RewriteBase /blog/ RewriteRule ^index\.php$ - [L] RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule . /blog/index.php [L] </IfModule> .htaccess under / : This does not work as expected. Apache serves the page. ASSERT: This would redirect to domain.com/ without index.cfm Options -Indexes -Multiviews <IfModule mod_rewrite.c> RewriteEngine On RewriteBase / RewriteRule ^index\.cfm$ - [L] RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule . /index.cfm [L] </IfModule> .htaccess under / : This works I'm presuming this is working because the redirect is to another .cfm page and a 404 handler in Application.cfc ... Options -Indexes -Multiviews <IfModule mod_rewrite.c> RewriteEngine On RewriteBase / RewriteRule ^.*\.cfm$ - [L] RewriteCond %{REQUEST_FILENAME} !-d RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{ENV:REDIRECT_STATUS} =404 RewriteRule . /404.cfm$ [L] </IfModule> I've attempted numerous different methods to rewrite .cfm urls ... Adding [PT], [L], [R], [NS], Moving the script to Directory blocks under httpd.conf --- all with the same results ... either the rewrite doesn't work or Apache crashes in an endless loop ... Any help would be greatly appreciated. Below is a single-visit rewrite log snippet for a request to /index.cfm ... the pass-through is taking effect before the rewrite ... cat rewrite_dump_mod | grep index.cfm [perdir /home/foo/public_html/] strip per-dir prefix: /home/foo/public_html/index.cfm -> index.cfm [perdir /home/foo/public_html/] applying pattern '^.*\.cfm$' to uri 'index.cfm' [perdir /home/foo/public_html/] pass through /home/foo/public_html/index.cfm [perdir /home/foo/public_html/] strip per-dir prefix: /home/foo/public_html/index.cfm -> index.cfm [perdir /home/foo/public_html/] applying pattern '^.*\.cfm$' to uri 'index.cfm' [perdir /home/foo/public_html/] pass through /home/foo/public_html/index.cfm * UPDATE * I've managed to figure this out ... it took a while ... Options -Indexes -Multiviews +FollowSymLinks <IfModule mod_rewrite.c> RewriteEngine On RewriteBase / RewriteCond %{HTTP_HOST} !^www\. RewriteRule ^(.*)$ http://www.%{HTTP_HOST}/$1 [R=301,L] RewriteCond %{THE_REQUEST} ^.*/index\.cfm RewriteRule ^(.*)index.cfm http://%{HTTP_HOST}/$1 [R=301,L] </IfModule>

  Read the article

• How to install Delorme StreetAtlas (any version) + GPS inside VirtualBox VM?

  - by hotei

  When I try to run the install program I get a popup message that says the installer program is not a valid executable. Background: I want a GPS with maps on my laptop running Ubuntu 10.4LTS. Unfortunately I can't find a decent native Linux GPS solution with 50 state US street level coverage. I have VirtualBox VMs available for WinXP and Win7 (among others). The VMs work fine with MicroSoft Streets and Trips (2010) and MapNGo 5 (a very! old Delorme product), but while both these products support GPS, they don't support the Earthmate LT-40 USB GPS I already have. I've got pretty much every Delorme Street Atlas they've released in the last decade and none of them will install in a VM. Any help would be much appreciated. Clarification: I've installed the Delorme products from these CDs before and the disks are fine - as long as installation is done on a "physical" machine. Added: I've tried install from an iso as well as the real CD. No difference in result (setup.exe is not a valid executable) The WinXP is SP-2 (held back on purpose at this point - I'll snapshot and fork a later SP to test). The Win2K is SP-6a. Win7(32) VM is whatever updates came out last week. The USB setup is working at least to the point where the GPS device is active in the device list (has an x in the box). At this point its not relevant because the program that needs to read it can't even be installed. Added 9-19: Added wine as harrymc suggested. Initial result was no change. Here's wines error message. The file '/media/Disk1/setup.exe' is not marked as executable. If this was downloaded or copied form an untrusted source, it may be dangerous to run. For more details, read about the executable bit. At first I thought the execute bit was the problem, but looking at several other windows CDs I see that the execute bit is not set on their exe files (which install to VM without error). Still it was worth a shot so I copied the StreetAtlas 9 DVD to my hard disk, changed the on-disk exe files to have the execute bit set and tried to install again. This time the install via wine got me through the installation process. When I start the program it bombs immediately, so we haven't made much real progress so far. I very much prefer the VM solution to wine, so I'm going back to that for now. To recap the VM situation, using an updated XP with SP3 and all recommended hotfixes: StreetAtlas 2009 USA fails with "not marked as executable". StreetAtlas 2007 USA fails with "not marked as executable". StreetAtlas 9 (copyright 2001) fails with "not marked as executable". SteeetAtlas (copyright 1991) fails with "not marked as executable" Delorme Topo 4 (copyright 2002) fails with "not marked as executable". Just about ready to give up. So I switched from XP VM to Win7 VM and tried StreetAtlas 2009 again. This time it installs. Earthmate USB GPS works. WTH? I feel like the monkey who just wrote a line of Shakespear. I'm smiling because it worked, but I have no clue why. I'm awarding the bounty to harrymc because wine did give some useful insight into the problem and a +1 to goyiux as thanks for helping.

  Read the article

• File server share access intermittent/slow/machine unstable: win2kr2

  - by Jack B.

  I have a file server running Win2k8R2 on an older HP DL380G4. It has nothing set up on it other than file sharing. All drivers/firmware/updates installed. The file server is used as a dump for a bunch of test machines - so essentially a lot of small files are being written to it. It was working fine until it started showing the following symptoms: Shares became either very slow/intermittent or could not access them at all. Logging in the the server, you could use it like normal but windows would start freezing and eventually you had to hard reboot it because nothing was responsive. After rebooting, it would work fine for 20min-2hours and then degrade into this broken state again. Some info after investigation: HP Raid Config utility shows the Raid array as functioning properly (RAID5 btw). Event log shows a bunch of DoS attacks from the test machines, saying it has disconnected the connection a. AFAIK (not part of my job) the test machines haven't changed the way they log information to this server or the amount of them hasn't increased. b. Nothing is infected, this server was scanned fully, and the test machines are re-imaged almost daily. Nothing in performance monitor shows as anything being pegged at maximum (CPU/HD/Network/RAM) I installed MS Network Monitor and it is showing a lot of traffic The server was using one gigabit Ethernet connection, I connected the second one as well with the same results. Forgot to add - one of the commonly written to dirs on the share has over 16k subdirs in it, with a crapton of small files within those dirs. Some of the OS instability was slow access to the drive which has this directory - perfmon doesn't show much activity on the HD though so I'm not sure if this crowded dir is the cause. Here is one important fact: I ran into this issue 2-3 months ago, couldn't figure it out, but I had a spare identical machine so I swapped them out (thought it was related to the machine), and now I have the same issue. Also, the computer will be stable if I turn off file sharing. So is the server just getting DoS'd by the test machines? I've never dealt with such an issue. Is instability in the server's OS common when getting DoS'd? Is there anything I can do to confirm this before telling the owners of the test machines to optimize their traffic? (I'm not sure what they'll be able to do). Is there something within Win2k8R2 that can balance the traffic across the two NICs? Any help would be appreciated. Update: Another thought - the drive with the share is RAID5 across 6 SCSI320 300GB HDs. They are near full capacity about 100GB from 1TB left. Could the amount of tiny files could be causing some weirdness with the parity in this array? I think I've read something about this in the past but I'm no expert on RAID.

  Read the article

• Hard drive after PCB swap strange stuff

  - by ramyy

  I’ve done a PCB swap to my HDD. The HDD model is: WD6400AAKS-00A7B2. The original PCB PN matches the new one (first three letter groups), though the cache mismatches (16MB original, 8MB new). The Hardware store that made the swap told me it was hard to do the swap, they have done firmware adaptation. I can see that this firmware version does not match the original, (01.03B01 original, 05.04E05 new). Still I can see that the serial number and model of the drive is correct, the hard drive appeared normal in the BIOS, all the partitions show and everything appears normal. I have encountered three things though, I have left the drive non operated for 2-3 weeks after the swap to avoid corrupting the data or anything else the new PCB might cause, until I buy a new drive and backup the data. I got a drive, and when I powered the old drive manually (I have a laptop, I use a normal desktop power supply and a USB/SATA connector), I heard the motor start and I could hear ticking as if the motor’s somehow struggling to start, and then the motor sound starts again then the ticking, and so on.. I tried powering again it happened again. The third time it started normally and I could see everything normally. I took the chance and copied all the data over to the new drive. When I was done, I powered off the drive (after more than 25 hours of continuous operation), tried to power it up again and it did so normally, and so are the times I powered it up later; but I got very suspicious now. What could be the problem here? And what happened new, it used to power normally after the swap directly? The second thing that happened is that I found size differences with some files; some include movies, songs, (.iso) files for games, and programs. I could find the size is the same, but size on disk is a little more on the new drive for these files. . I’ve tried some of those files (with size differences) they worked fine. They are not too much but still make you suspicious of the integrity of the data copied; one cannot try if all files are working for about (580 GB) worth of data. I tried copying these files on the same partition they exist of the old drive; they are the same in size as when copied to the new drive (allocation unit size not the issue). I took an image of a partition (sector by sector including empty ones) and when I explore it, these file sizes are equal to the original (old drive); I copy them anywhere else their size on disk, increases, i.e becomes equal to the ones I copy from the old drive itself anywhere. Why the size difference and can one trust the integrity of the data?? The third thing is that when I connect my new external USB HDD, the partitions of the old HDD unmount and then mount again. Connected are: (USB mouse + Old HDD) then external HDD. Why that happens?? Considering the following: I compared the SMART reports from after the swap directly and after the copying, no error readings or reallocated sectors where reported. Here they are: http://www.image-share.com/ijpg-1939-219.html I later ran both WD data life guard tests and they came out passed. I’m worried for this drive since I must be sure the data is fine and safe on the new one, and I will consider it backup for the new one, since you can’t trust anything anymore. I hope you can forgive me for the length of the post, but couldn’t ignore any of the details, this hard drive contains very important data to me and I have to deal with the situation with great care.

  Read the article

< Previous Page | 573 574 575 576 577 578 579 580 581 582 583 584  | Next Page >