Search Results

Search found 29159 results on 1167 pages for 'xml configuration'.

Page 578/1167 | < Previous Page | 574 575 576 577 578 579 580 581 582 583 584 585  | Next Page >

  • How To Quickly Reboot Directly from Windows 7 to XP, Vista, or Ubuntu

    - by The Geek
    One of the biggest annoyances with a dual-boot system is having to wait for your PC to reboot to select the operating system you want to switch to, but there’s a simple piece of software that can make this process easier. This guest article was written by Ryan Dozier from the Doztech tech blog. With a small piece of software called iReboot we can skip the above step all together and instantly reboot into the operating system we want right from Windows. Their description says: “Instead of pressing restart, waiting for Windows to shut down, waiting for your BIOS to post, then selecting the operating system you want to boot into (within the bootloader time-limit!); you just select that entry from iReboot and let it do the rest!” Don’t worry about iReboot reconfiguring  your bootloader or any dual boot configuration you have. iReboot will only boot the selected operating system once and go back to your default settings. Using iReboot iReboot is quick and easy to install. Just download it, link below, run through the setup and select the default configuration. iReboot will automatically figure out what operating systems you have installed and appear in the taskbar. Go over to the taskbar and right click on the iReboot icon and select which operating system you want to reboot into. This method will add a check mark on the operating system you want to boot into. On your next reboot the system will automatically load your choice and skip the Windows Boot Manager. If you want to reboot automatically just select “Reboot on Selection” in the iReboot menu.   To be even more productive, you can install iReboot into each Windows operating system to quickly access the others with a few simple clicks.   iReboot does not work in Linux so you will have to reboot manually. Then wait for the Windows Boot Manager to load and select your operating system.   Conclusion iReboot works on  Windows XP, Windows Vista,  and Windows 7 as well as 64 bit versions of these operating systems. Unfortunately iReboot is only available for Windows but you can still use its functionality in Windows to quickly boot up your Linux machine. A simple reboot in Linux will take you back to Windows Boot Manager. Download iReboot from neosmart.net Editor’s note: We’ve not personally tested this software over at How-To Geek, but Neosmart, the author of the software, generally makes quality stuff. Still, you might want to test it out on a test machine first. If you’ve got any experience with this software, please be sure to let your fellow readers know in the comments. Similar Articles Productive Geek Tips Restart the Ubuntu Gnome User Interface QuicklyKeyboard Ninja: 21 Keyboard Shortcut ArticlesTest Your Computer’s Memory Using Windows Vista Memory Diagnostic ToolEnable or Disable UAC From the Windows 7 / Vista Command LineSet Windows as Default OS when Dual Booting Ubuntu TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Home Networks – How do they look like & the problems they cause Check Your IMAP Mail Offline In Thunderbird Follow Finder Finds You Twitter Users To Follow Combine MP3 Files Easily QuicklyCode Provides Cheatsheets & Other Programming Stuff Download Free MP3s from Amazon

    Read the article

  • Networking- Wireless and Wired not working

    - by JJ White
    So everything in Ubuntu has been working great until networking stopped working. I've spent the better part of two days scouring for a fix with no luck. Here is my info...your help would so be appreciated. grep -i eth /var/log/syslog | tail Sep 25 16:31:59 jj-laptop NetworkManager[970]: <info> (eth0): cleaning up... Sep 25 16:31:59 jj-laptop NetworkManager[970]: <info> (eth0): taking down device. Sep 25 16:31:59 jj-laptop kernel: [23403.998837] sky2 0000:02:00.0: eth0: disabling interface Sep 25 16:35:54 jj-laptop NetworkManager[970]: <info> (eth0): now managed Sep 25 16:35:54 jj-laptop NetworkManager[970]: <info> (eth0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2] Sep 25 16:35:54 jj-laptop NetworkManager[970]: <info> (eth0): bringing up device. Sep 25 16:35:54 jj-laptop kernel: [23413.629424] sky2 0000:02:00.0: eth0: enabling interface Sep 25 16:35:54 jj-laptop kernel: [23413.635703] ADDRCONF(NETDEV_UP): eth0: link is not ready Sep 25 16:35:54 jj-laptop NetworkManager[970]: <info> (eth0): preparing device. Sep 25 16:35:54 jj-laptop NetworkManager[970]: <info> (eth0): deactivating device (reason 'managed') [2] and then ifconfig -a eth0 Link encap:Ethernet HWaddr 00:17:42:14:e9:e1 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:4605 errors:0 dropped:0 overruns:0 frame:0 TX packets:287 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:315161 (315.1 KB) TX bytes:63680 (63.6 KB) Interrupt:16 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:13018 errors:0 dropped:0 overruns:0 frame:0 TX packets:13018 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:880484 (880.4 KB) TX bytes:880484 (880.4 KB) wlan0 Link encap:Ethernet HWaddr 00:13:02:d0:ee:13 BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) also iwconfig lo no wireless extensions. wlan0 IEEE 802.11abg ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=off Retry long limit:7 RTS thr:off Fragment thr:off Power Management:on eth0 no wireless extensions. and of course sudo lshw -C network *-network description: Ethernet interface product: 88E8055 PCI-E Gigabit Ethernet Controller vendor: Marvell Technology Group Ltd. physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: 12 serial: 00:17:42:14:e9:e1 size: 1Gbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full firmware=N/A latency=0 link=no multicast=yes port=twisted pair speed=1Gbit/s resources: irq:44 memory:f0000000-f0003fff ioport:2000(size=256) memory:c0a00000-c0a1ffff *-network DISABLED description: Wireless interface product: PRO/Wireless 3945ABG [Golan] Network Connection vendor: Intel Corporation physical id: 0 bus info: pci@0000:05:00.0 logical name: wlan0 version: 02 serial: 00:13:02:d0:ee:13 width: 32 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwl3945 driverversion=3.2.0-31-generic firmware=15.32.2.9 latency=0 link=no multicast=yes wireless=IEEE 802.11abg resources: irq:45 memory:c0100000-c0100fff last but not least lsmod Module Size Used by nls_iso8859_1 12617 0 nls_cp437 12751 0 vfat 17308 0 fat 55605 1 vfat usb_storage 39646 0 uas 17828 0 dm_crypt 22528 0 rfcomm 38139 0 parport_pc 32114 0 bnep 17830 2 ppdev 12849 0 bluetooth 158438 10 rfcomm,bnep binfmt_misc 17292 1 snd_hda_codec_idt 60251 1 pcmcia 39791 0 joydev 17393 0 snd_hda_intel 32765 3 snd_hda_codec 109562 2 snd_hda_codec_idt,snd_hda_intel snd_hwdep 13276 1 snd_hda_codec snd_pcm 80845 2 snd_hda_intel,snd_hda_codec snd_seq_midi 13132 0 yenta_socket 27428 0 snd_rawmidi 25424 1 snd_seq_midi snd_seq_midi_event 14475 1 snd_seq_midi snd_seq 51567 2 snd_seq_midi,snd_seq_midi_event pcmcia_rsrc 18367 1 yenta_socket wacom_w8001 12906 0 irda 185517 0 arc4 12473 2 iwl3945 73111 0 iwl_legacy 71134 1 iwl3945 mac80211 436455 2 iwl3945,iwl_legacy cfg80211 178679 3 iwl3945,iwl_legacy,mac80211 snd_timer 28931 2 snd_pcm,snd_seq snd_seq_device 14172 3 snd_seq_midi,snd_rawmidi,snd_seq dm_multipath 22710 0 pcmcia_core 21511 3 pcmcia,yenta_socket,pcmcia_rsrc psmouse 96619 0 apanel 12718 0 serport 12808 1 serio_raw 13027 0 crc_ccitt 12595 1 irda mac_hid 13077 0 snd 62064 15 snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_t imer,snd_seq_device input_polldev 13648 1 apanel soundcore 14635 1 snd snd_page_alloc 14115 2 snd_hda_intel,snd_pcm lp 17455 0 fujitsu_laptop 18504 0 parport 40930 3 parport_pc,ppdev,lp dm_raid45 76451 0 xor 25987 1 dm_raid45 dm_mirror 21822 0 dm_region_hash 16065 1 dm_mirror dm_log 18193 3 dm_raid45,dm_mirror,dm_region_hash sdhci_pci 18324 0 sdhci 28241 1 sdhci_pci sky2 49545 0 i915 414939 3 drm_kms_helper 45466 1 i915 drm 197692 4 i915,drm_kms_helper i2c_algo_bit 13199 1 i915 video 19068 1 i915

    Read the article

  • how do i fix this: the networking and wireless are enabled. but list of networks under wireless networks not available

    - by Ayesha Ahmad
    i started working with ubuntu 11.10 last year. i upgraded to 12.04 a week back. since then i have had all sorts of problems with network connection. first had to install the new driver. the hardware switch somehow got disabled then the above problem arrived. even tho the options are all enabled, the OS is not able to detect scan available network connections. also i have to bring to notice that once in a while it does get connected, can not explain how it happens. I want to fix this problem once and for all. please help. ifconfig: eth0 Link encap:Ethernet HWaddr f0:4d:a2:51:b3:c8 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:44 eth1 Link encap:Ethernet HWaddr 1c:65:9d:67:d5:e1 inet6 addr: fe80::1e65:9dff:fe67:d5e1/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:170 TX packets:0 errors:27 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:17 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:344 errors:0 dropped:0 overruns:0 frame:0 TX packets:344 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:20336 (20.3 KB) TX bytes:20336 (20.3 KB) lshw -c network *-network description: Wireless interface product: BCM4313 802.11b/g/n Wireless LAN Controller vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: eth1 version: 01 serial: 1c:65:9d:67:d5:e1 width: 64 bits clock: 33MHz capabilities: bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=5.100.82.38 latency=0 multicast=yes wireless=IEEE 802.11 resources: irq:17 memory:f0500000-f0503fff *-network description: Ethernet interface product: AR8152 v1.1 Fast Ethernet vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:04:00.0 logical name: eth0 version: c1 serial: f0:4d:a2:51:b3:c8 capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.0-NAPI firmware=N/A latency=0 multicast=yes port=twisted pair resources: irq:44 memory:f0400000-f043ffff ioport:2000(size=128) iwconfig lo no wireless extensions. eth1 IEEE 802.11 Access Point: Not-Associated Link Quality:5 Signal level:0 Noise level:196 Rx invalid nwid:0 invalid crypt:0 invalid misc:0 eth0 no wireless extensions. lspci 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 18) 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18) 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) 00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06) 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 06) 00:1c.5 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 6 (rev 06) 00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a6) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 06) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller (rev 06) 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 06) 00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 06) 03:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01) 04:00.0 Ethernet controller: Atheros Communications Inc. AR8152 v1.1 Fast Ethernet (rev c1) ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 05) ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 05) ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 05) ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 05) ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 05) ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 05) I hope this information is of some help.

    Read the article

  • MEB Support to NetBackup MMS

    - by Hema Sridharan
    In MySQL Enterprise Backup 3.6, new option was introduced to support backup to tapes via SBT interface. SBT stands for System Backup to Tape, an Oracle API that helps to perform backup and restore jobs via media management software such as Oracle's Secure Backup (OSB). There are other storage managers like IBM's Tivoli Storage Manager (TSM) and Symantec's Netbackup (NB) which are also supported by MEB but we don't guarantee that it will function as expected for every release. MEB supports SBT API version 2.0 In this blog, I am primarily going to focus the interface of MEB and Symantec's NB. If we are using tapes for backup, ensure that tape library and tape drives are compatible. Test Setup 1. Install NB 7.5 master and media servers in Linux OS. ( NB 7.1 can also be used but for testing purpose I used NB 7.5)2. Install MEB 3.8 also in Linux OS.3. Install NB admin console in your windows desktop and configure the NB master server from there. Note: Ensure that you have root user permission to install NetBackup. Configuration Steps for MEB and NB Once MEB and NB are installed, Ensure that NB is linked to MEB by specifying the library /usr/openv/netbackup/bin/libobk.so64 in the mysqlbackup command line using --sbt-lib-path. Configure the NB master server from windows console. That is configure the storage units by specifying the Storage unit name, Disk type, Media Server name etc.  Create NetBackup policies that are user selectable. But please make sure that policy type is "Oracle".  Define the clients where MEB will be executed. Some times this will be different host where MEB is run or some times in same Media server where NB and tapes are attached. Now once the installation and configuration steps are performed for MEB and NB, the next part is the actual execution.MEB should be run as single file backup using --backup-image option with prefix sbt:(it is a tag which tells MEB that it should stream the backup image through the SBT interface) which is sent to NB client via SBT interface . The resulting backup image is stored where NB stores the images that it backs up. The following diagram shows how MEB interacts with MMS through SBT interface. Backup The following parameters should also be ready for the execution,    --sbt-lib-path : Path to SBT library specific to NetBackup MMS. SBT lib for NetBackup  is in /usr/openv/netbackup/bin/libobk.so64    --sbt-environment: Environment variables must be defined specific to NetBackup. In our example below, we use     NB_ORA_SERV=myserver.com,    NB_ORA_CLIENT=myserver.com,    NB_ORA_POLICY=NBU-MEB    ORACLE_HOME = /export/home2/tmp/hema/mysql-server/ ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- ./mysqlbackup --port=13000 --protocol=tcp --user=root --backup-image=sbt:bkpsbtNB --sbt-lib-path=/usr/openv/netbackup/bin/libobk.so64 --sbt-environment="NB_ORA_SERV=myserver.com, NB_ORA_CLIENT=myserver.com, NB_ORA_POLICY=NBU-MEB, ORACLE_HOME=/export/home2/tmp/hema/mysql-server/” --backup-dir=/export/home2/tmp/hema/MEB_bkdir/ backup-to-image ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Once backup is completed successfully, this should appear in Activity Monitor in NetBackup Console.For restore,  image contents has to be extracted using image-to-backup-dir command and then apply-log and copy-back steps are applied. ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- ./mysqlbackup --sbt-lib-path=/usr/openv/netbackup/bin/libobk.so64  --backup-dir=/export/home2/tmp/hema/NBMEB/ --backup-image=sbt:bkpsbtNB image-to-backup-dir-----------------------------------------------------------------------------------------------------------------------------------Now apply logs as usual, shutdown the server and perform restore, restart the server and check the data contents. ./mysqlbackup   ---backup-dir=/export/home2/tmp/hema/NBMEB/  apply-log ./mysqlbackup --datadir=/export/home2/tmp/hema/mysql-server/mysql-5.5-meb-repo/mysql-test/var/mysqld.1/data/  --backup-dir=/export/home2/tmp/hema/MEB_bkpdir/ innodb_log_files_in_group=2 --innodb_log_file_size=5M --user=root --port=13000 --protocol=tcp copy-back The NB console should show 'Restore" job as done. If you don't see that there is something wrong with MEB or NetBackup.You can also refer to more detailed steps of MEB and NB integration in whitepaper here

    Read the article

  • HPCM 11.1.2.x - Outline Optimisation for Calculation Performance

    - by Jane Story
    When an HPCM application is first created, it is likely that you will want to carry out some optimisation on the HPCM application’s Essbase outline in order to improve calculation execution times. There are several things that you may wish to consider. Because at least one dense dimension for an application is required to deploy from HPCM to Essbase, “Measures” and “AllocationType”, as the only required dimensions in an HPCM application, are created dense by default. However, for optimisation reasons, you may wish to consider changing this default dense/sparse configuration. In general, calculation scripts in HPCM execute best when they are targeting destinations with one or more dense dimensions. Therefore, consider your largest target stage i.e. the stage with the most assignment destinations and choose that as a dense dimension. When optimising an outline in this way, it is not possible to have a dense dimension in every target stage and so testing with the dense/sparse settings in every stage is the key to finding the best configuration for each individual application. It is not possible to change the dense/sparse setting of individual cloned dimensions from EPMA. When a dimension that is to be repeated in multiple stages, and therefore cloned, is defined in EPMA, every instance of that dimension has the same storage setting. However, such manual changes may not be preserved in all cases. Please see below for full explanation. However, once the application has been deployed from EPMA to HPCM and from HPCM to Essbase, it is possible to make the dense/sparse changes to a cloned dimension directly in Essbase. This can be done by editing the properties of the outline in Essbase Administration Services (EAS) and manually changing the dense/sparse settings of individual dimensions. There are two methods of deployment from HPCM to Essbase from 11.1.2.1. There is a “replace” deploy method and an “update” deploy method: “Replace” will delete the Essbase application and replace it. If this method is chosen, then any changes made directly on the Essbase outline will be lost. If you use the update deploy method (with or without archiving and reloading data), then the Essbase outline, including any manual changes you have made (i.e. changes to dense/sparse settings of the cloned dimensions), will be preserved. Notes If you are using the calculation optimisation technique mentioned in a previous blog to calculate multiple POVs (https://blogs.oracle.com/pa/entry/hpcm_11_1_2_optimising) and you are calculating all members of that POV dimension (e.g. all months in the Period dimension) then you could consider making that dimension dense. Always review Block sizes after all changes! The maximum block size recommended in the Essbase Database Administrator’s Guide is 100k for 32 bit Essbase and 200k for 64 bit Essbase. However, calculations may perform better with a larger than recommended block size provided that sufficient memory is available on the Essbase server. Test different configurations to determine the most optimal solution for your HPCM application. Please note that this blog article covers HPCM outline optimisation only. Additional performance tuning can be achieved by methodically testing database settings i.e data cache, index cache and/or commit block settings. For more information on Essbase tuning best practices, please review these items in the Essbase Database Administrators Guide. For additional information on the commit block setting, please see the previous PA blog article https://blogs.oracle.com/pa/entry/essbase_11_1_2_commit

    Read the article

  • Silverlight Cream for December 07, 2010 -- #1004

    - by Dave Campbell
    In this Issue: András Velvárt, Kunal Chowdhury(-2-), AvraShow, Gill Cleeren, Ian T. Lackey, Richard Waddell, Joe McBride, Michael Crump, Xpert360, keyboardP, and Pete Vickers(-2-). Above the Fold: Silverlight: "Grouping Records in Silverlight DataGrid using PagedCollectionView" Kunal Chowdhury WP7: "Phone 7 Back Button and the ListPicker control" Ian T. Lackey Shoutouts: Colin Eberhardt has some Silverlight 5 Adoption Predictions you may want to check out. Michael Crump has a post up showing lots of the goodness of Silverlight 5 from the Firestarter... screenshots, code snippets, etc: Silverlight 5 – What’s New? (Including Screenshots & Code Snippets) Kunal Chowdhury has a pretty complete Silverlight 5 feature set from the Firestarter and an embedded copy of Scott Guthrie's kenote running on the page: New Features Announced for Silverlight 5 Beta From SilverlightCream.com: Just how productive is WP7 development compared to iOS, Android and mobile Web? András Velvárt blogged about a contest he took part in to build a WP7 app in 1-1/2 hours without any prior knowledge of it's funtion. He and his team-mate were pitted against other teams on Android, IOS, and mobile Web... guess who got (almost) their entire app running? ... just too cool Andras! ... Grouping Records in Silverlight DataGrid using PagedCollectionView Kunal Chowdhury has a couple good posts up, this first one is on using the PagedCollectionView to group the records in a DataGrid... code included. Filtering Records in Silverlight DataGrid using PagedCollectionView Kunal Chowdhury then continues with another post on the PagedCollectionView only this time is showing how to do some filtering. DeepZoom Tips and Techniques AvraShow has a post up discussing using DeepZoom to explore, in his case, a Printed Circuit Board, with information about how he proceeded in doing that, and some tips and techniques along the way. The validation story in Silverlight (Part 2) Gill Cleeren has Part 2 of his Silverlight Validation series up at SilverlightShow. This post gets into IDataErrorInfo and INotifyDataErrorInfo. Lots of code and the example is available for download. Phone 7 Back Button and the ListPicker control Ian T. Lackey has a post up about the WP7 backbutton and what can get a failure from the Marketplace in that area, and how that applies to the ListPicker as well. Very Simple Example of ICommand CanExecute Method and CanExecuteChanged Event Richard Waddell has a nice detailed tutorial on ICommand and dealing with CanExecute... lots of Blend love in this post. Providing an Alternating Background Color for an ItemsControl Joe McBride has a post up discussing putting an alternating background color on an ItemsControl... you know, how you do on a grid... interesting idea, and all the code... Pimp my Silverlight Firestarter Michael Crump has a great Firestarter post up ... where and how to get the videos, the labs... a good Firestarter resource for sure. Adventures with PivotViewer Part 7: Slider control Xpert360 has part 7 of the PivotViewer series they're doing up. This time they're demonstrating taking programmatic control of the Zoom slider. Creating Transparent Lockscreen Wallpapers for WP7 I don't know keyboardP's name, but he's got a cool post up about getting an image up for the WP7 lock screen that has transparent regions on it... pretty cool actually. Windows Phone 7 Linq to XML 'strangeness' Pete Vickers has a post up describing a problem he found with Linq to XML on WP7. He even has a demo app that has the problem, and the fix... and it's all downloadable. Windows Phone 7 multi-line radio buttons Pete Vickers has another quick post up on radio buttons with so much text that it needs wrapping ... this is for WP7, but applies to Silverlight in general. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

    Read the article

  • ArchBeat Link-o-Rama Top 10 for August 2012

    - by Bob Rhubart
    The Top 10 most popular items shared via the OTN ArchBeat Facebook page for the month of August 2012. Now Available: Oracle SQL Developer 3.2 (3.2.09.23) New features include APEX listener, UI enhancements, and 12c database support. The Role of Oracle VM Server for SPARC in a Virtualization Strategy In this article, Matthias Pfutzner discusses hardware, desktop, and operating system virtualization, along with various Oracle virtualization technologies, including Oracle VM Server for SPARC. How to Manually Install Flash Player Plugin to see the Oracle Enterprise Manager Performance Page | Kai Yu So, you're a DBA and you want to check the Performance page in Oracle Enterprise Manager (11g or 12c). So you click the Performance tab and… nothing. Zip. Nada. The Flash plugin is a no-show. Relax! Oracle ACE Director Kai Yu shows you what you need to do to see all the pretty colors instead of that dull grey screen. Relationally Challenged (CX - CRM - EQ/RQ/CRQ) | Chris Warticki Self-proclaimed Oracle Support "spokesmodel" Chris Chris Warticki has some advice for those interested in Customer Relationship Management: "How about we just dumb it down, strip it to the core, keep it simple and LISTEN?! No more focus groups, no more surveys, and no need to gather more data. We have plenty of that. Why not just provide the customer what they are asking for?" Free WebLogic Server Course | Middleware Magic So you want to sharpen your Oracle WebLogic Server skills, but you prefer to skip the whole classroom bit and don't want to be bothered with dealing with an instructor? No problem! Oracle ACE Rene van Wijk, a prolific Middleware Magic blogger, has information on an Oracle WebLogic course you can take on your own time, at your own pace. Oracle VM VirtualBox 4.1.20 released Oracle VM VirtualBox 4.1.20 was just released at the community and Oracle download sites, reports the Fat Bloke. This is a maintenance release containing bug fixes and stability improvements. Optimizing OLTP Oracle Database Performance using Dell Express Flash PCIe SSDs | Kai Yu Oracle ACE Director Kai Yu shares resources based on "several extensive performance studies on a single node Oracle 11g R2 database as well as a two node 11gR2 Oracle Real Application clusters (RAC) database running on Dell PowerEdge R720 servers with Dell Express Flash PCIe SSDs on Oracle Enterprise Linux 6.2 platform." Oracle ACE sessions at Oracle OpenWorld With so many great sessions at this year's event, building your Oracle OpenWorld schedule can involve making a lot of tough choices. But you'll find that the sessions led by Oracle ACEs just might be the icing on the cake for your OpenWorld experience. MySQL Update: The Cleveland MySQL Meetup (Independence, OH) Oracle MySQL team member Benjamin Wood, a MySQL engineer and five year veteran of the MySQL organization, will speak at the Cleveland MySQL Meetup event on September 12. The presentation will include a MySQL 5.5 Overview, Oracle's Roadmap for MySQL, including specifics on MySQL 5.6, best practices and how to overcome development and operational MySQL challenges, and the new MySQL commercial extensions. Click the link for time and location information. Parsing XML in Oracle Database | Martijn van der Kamp Martijn van der Kamp's post deals with processing XML in PL/SQL code and processing the data into the database. Thought for the Day "Walking on water and developing software from a specification are easy if both are frozen." — Edward V. Berard Source: SoftwareQuotes.com

    Read the article

  • Oracle OpenWorld Update: Oracle GoldenGate for High Availability

    - by Doug Reid
    0 false 18 pt 18 pt 0 0 false false false /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:12.0pt; font-family:"Times New Roman"; mso-ascii-font-family:Cambria; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Cambria; mso-hansi-theme-font:minor-latin;} One of our primary themes this year for the Oracle OpenWorld Sessions featuring Oracle GoldenGate is High Availability. This is a pretty wide theme, but the focus will be on ways of maximizing uptime for critical systems during planned and unplanned events. We have a number of very informative sessions dedicated to exploring this theme in detail; from deep product implementation strategies up to lessons learned by our customers when using Oracle GoldenGate to meet strict SLAs. We kick this track off with our Customer Panel on Zero Downtime Operations on Monday, which I overviewed in my last posting. This is followed by Comcast, who will be hosting a sessions at 1:45PM in Moscone West 3014. Their session will discuss using Oracle GoldenGate to reduce downtime during a database upgrade. Here’s an overview: CON8571 - Oracle Database Upgrade with Oracle GoldenGate: Best Practices from Comcast Does your business demand high availability? In this session, Comcast, among the largest telecom firms in the world, shares tips on how to achieve zero downtime while upgrading to Oracle Database 11g Release 2, using a combination of Oracle technologies: Oracle Real Application Clusters (Oracle RAC), Oracle Database’s Grid Infrastructure and Oracle Recovery Manager (Oracle RMAN) features, Oracle GoldenGate, and Oracle Active Data Guard. This successful upgrade took place on a mission-critical system that handles more than 60 million business requests and service calls a day. You’ll also hear how Comcast leverages Oracle Advanced Customer Support Services, including an Oracle Solution Support Center, to maximize performance and availability of its Oracle technologies. On Tuesday, Joydip Kundu (Director of Software Development) will be presenting “Oracle GoldenGate and Oracle Data Guard: Working Together Seamlessly” at 10:15AM in Moscone South 3005. This session focuses on how both modes of Oracle GoldenGate extract (Classic and Integrated Capture) can be used with Oracle Data Guard for disaster recovery purposes or to offload extract processing. That afternoon at 1:15PM Comcast takes the stage again to discuss firsthand lessons learned implementing Oracle GoldenGate in a heterogeneous, highly available environment. Here’s a rundown of their session: CON8750 - High-Volume OLTP with Oracle GoldenGate: Best Practices from Comcast Does your business demand high availability in a mission-critical environment? In this session, Comcast, one of the largest telecom firms, shares best practices for leveraging Oracle GoldenGate to replicate high-volume online transaction processing data from Tandem NSK SQL/MX to Teradata. Hear critical success factors from Comcast for overall platform and component architectures as well as configuration and tuning techniques. Learn how it met the challenges of replication in a complex heterogeneous environment. You’ll also hear how Comcast leverages Oracle Advanced Customer Support Services, including an Oracle Solution Support Center, to provide mission-critical support for maximized performance and availability of its Oracle environment. The final session on the high availability track will be hosted by Patricia Mcelroy (Distinguished Product Manager) and Stephan Haisly (Principle Member of Technical Staff). Their session (CON8401 - Tuning and Troubleshooting Oracle GoldenGate on Oracle Database) covers techniques for performance tuning and troubleshooting of Oracle GoldenGate on Oracle Database. Using various types of workloads (OLTP, batch, Oracle’s PeopleSoft Enterprise), the presentation steps through the process of monitoring and troubleshooting the configuration to maximize performance and replication throughput within and between Oracle clouds. Join us at our sessions or stop by our demo pods in Moscone south and meet the product management and development teams.

    Read the article

  • Ubuntu 12.04 lightdm dumps to tty. Cannot start GUI interface when booting off harddrive, but can when booting off usb

    - by user72681
    When booting, lightdm dumps to tty. No GUI interface works- this is after a fresh install of Ubuntu 12.04 where the GUI interface works when running off the USB. I have an NVIDIA Corporation G98 [Quadro NVS 420] graphics card. After I call startx from the terminal it still doesn't work. I get the following in the Xorg.0.log: [ 327.718] (--) NVIDIA(0): Memory: 262144 kBytes [ 327.718] (--) NVIDIA(0): VideoBIOS: 62.98.6f.00.07 [ 327.718] (II) NVIDIA(0): Detected PCI Express Link width: 16X [ 327.718] (--) NVIDIA(0): Interlaced video modes are supported on this GPU [ 327.756] (--) NVIDIA(0): Connected display device(s) on Quadro NVS 420 at PCI:3:0:0 [ 327.756] (--) NVIDIA(0): none [ 327.756] (EE) NVIDIA(0): No display devices found for this X screen. [ 328.010] (II) UnloadModule: "nvidia" [ 328.010] (II) Unloading nvidia [ 328.010] (II) UnloadModule: "wfb" [ 328.010] (II) Unloading wfb [ 328.010] (II) UnloadModule: "fb" [ 328.010] (II) Unloading fb [ 328.011] (EE) Screen(s) found, but none have a usable configuration. [ 328.011] Fatal server error: [ 328.011] no screens found /var/log/lightdm/lightdm.log [+0.00s] DEBUG: Starting local X display [+0.00s] DEBUG: X server :0 will replace Plymouth [+0.02s] DEBUG: Using VT 7 [+0.02s] DEBUG: Activating VT 7 [+0.02s] DEBUG: Logging to /var/log/lightdm/x-0.log [+0.02s] DEBUG: Writing X server authority to /var/run/lightdm/root/:0 [+0.02s] DEBUG: Launching X Server [+0.02s] DEBUG: Launching process 1074: /usr/bin/X :0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch -background none [+0.02s] DEBUG: Waiting for ready signal from X server :0 [+0.02s] DEBUG: Acquired bus name org.freedesktop.DisplayManager [+0.02s] DEBUG: Registering seat with bus path /org/freedesktop/DisplayManager/Seat0 [+1.38s] DEBUG: Process 1074 exited with return value 1 [+1.38s] DEBUG: X server stopped [+1.38s] DEBUG: Removing X server authority /var/run/lightdm/root/:0 [+1.38s] DEBUG: Releasing VT 7 [+1.38s] DEBUG: Stopping Plymouth, X server failed to start [+1.39s] DEBUG: Display server stopped [+1.39s] DEBUG: Stopping display [+1.39s] DEBUG: Display stopped [+1.39s] DEBUG: Stopping X local seat, failed to start a display [+1.39s] DEBUG: Stopping seat [+1.39s] DEBUG: Seat stopped [+1.39s] DEBUG: Required seat has stopped [+1.39s] DEBUG: Stopping display manager [+1.39s] DEBUG: Display manager stopped [+1.39s] DEBUG: Stopping daemon [+1.39s] DEBUG: Exiting with return value 1 /var/log/lightdm/x-0.log X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.24-31-server x86_64 Ubuntu Current Operating System: Linux oorn 3.2.0-23-generic #36-Ubuntu SMP Tue Apr 10 20:39:51 UTC 2012 x86_64 Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-23-generic root=UUID=b25ab072-077d-40f1-95a4-c7fd66acd2f0 ro reboot=pci quiet splash vt.handoff=7 Build Date: 07 May 2012 11:43:21PM xorg-server 2:1.11.4-0ubuntu10.2 (For technical support please see http://www.ubuntu.com/support) Current version of pixman: 0.24.4 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Wed Jun 27 12:51:45 2012 (==) Using config file: "/etc/X11/xorg.conf" (==) Using system config directory "/usr/share/X11/xorg.conf.d" (EE) NVIDIA(0): No display devices found for this X screen. (EE) Screen(s) found, but none have a usable configuration. Fatal server error: no screens found Please consult the The X.Org Foundation support at http://wiki.x.org for help. Please also check the log file at "/var/log/Xorg.0.log" for additional information. ddxSigGiveUp: Closing log Server terminated with error (1). Closing log file.

    Read the article

  • Install lubuntu 12.04 on an old Dell c600 : Video issues

    - by maniat1k
    I am trying to install lubuntu on an old laptop. I use the 386 alternate instalation of it, because it has only 256mb ... All when ok so when I start up the lubuntu the screen splits between 1024x768 and 800x600... its very horrible to use =). Ok I do this: lspci and found an ATI Rage mobility M3. 01:00.0 VGA compatible controller: ATI Technologies Inc Rage Mobility M3 AGP 2x (rev 02) So I tryied the old xorg way to edit the missing resolution, but it does not work:... Section "Screen" Identifier "Default Screen" Device "ATI Technologies, Inc. Rage Mobility M3 (AGP)" Monitor "Generic Monitor" DefaultDepth 24 SubSection "Display" Depth 1 Modes "1024x768" EndSubSection SubSection "Display" Depth 4 Modes "1024x768" EndSubSection SubSection "Display" Depth 8 Modes "1024x768" EndSubSection SubSection "Display" Depth 15 Modes "1024x768" EndSubSection SubSection "Display" Depth 16 Modes "1024x768" EndSubSection SubSection "Display" Depth 24 Modes "1024x768" EndSubSection EndSection on an brand new xorg.conf... Do an init 6 to see if X take the changes, but nothing habbened: also tryed to do pkg-reconfigure -changedir /etc/X11 (where I created the new xorg.conf) and nothing.. removed the X conf from /tmp.. also do sudo apt-get update / upgrade... and no luck... UPDATE Updated to 12.04. This an edited xorg fr old dells like mine: # xorg.conf (X.Org X Window System server configuration file) # # This file was generated by dexconf, the Debian X Configuration tool, using # values from the debconf database. # # Edit this file with caution, and see the xorg.conf manual page. # (Type "man xorg.conf" at the shell prompt.) # # This file is automatically updated on xserver-xorg package upgrades *only* # if it has not been modified since the last upgrade of the xserver-xorg # package. # # If you have edited this file but would like it to be automatically updated # again, run the following command: # sudo dpkg-reconfigure -phigh xserver-xorg # xorg.conf for dell latitude c600 by A. Howlett and others Section "ServerLayout" Identifier "Default Server Layout" Screen 0 "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" InputDevice "Generic Mouse" "AlwaysCore" EndSection Section "Files" RgbPath "/usr/X11R6/lib/X11/rgb" FontPath "/usr/share/fonts/local" FontPath "/usr/share/fonts/misc" FontPath "/usr/share/fonts/75dpi:unscaled" FontPath "/usr/share/fonts/100dpi:unscaled" FontPath "/usr/share/fonts/Type1" FontPath "/usr/share/fonts/CID" FontPath "/usr/share/fonts/Speedo" FontPath "/usr/share/fonts/cyrillic" FontPath "/usr/share/fonts/artwiz-aleczapka" FontPath "/usr/share/fonts/TTF" FontPath "/usr/share/fonts/util" FontPath "/usr/local/share/fonts" FontPath "/usr/share/fonts" FontPath "/usr/share/fonts" FontPath "/usr/share/fonts/aquafont" FontPath "/usr/share/fonts/artwiz" FontPath "/usr/share/fonts/artwiz-aleczapka-en" FontPath "/usr/share/fonts/corefonts" FontPath "/usr/share/fonts/freefont" EndSection Section "Module" Load "GLcore" Load "dbe" Load "dri" Load "extmod" Load "glx" Load "pex5" Load "record" Load "xie" Load "v4l" Load "freetype" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "keyboard" Option "XkbModel" "pc104" Option "XkbLayout" "us" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "CorePointer" Option "Device" "/dev/psaux" Option "Protocol" "PS/2" Option "Emulate3Buttons" "true" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" Identifier "Generic Mouse" Driver "mouse" Option "SendCoreEvents" "true" Option "Device" "/dev/input/mice" Option "Protocol" "ImPS/2" Option "Emulate3Buttons" "true" Option "ZAxisMapping" "4 5" EndSection Section "Monitor" Identifier "laptop LCD" VendorName "Dell" ModelName "Latitude C600" HorizSync 31.5-48.5 VertRefresh 40-70 EndSection Section "Device" Identifier "Video0" Driver "r128" VideoRam 8192 Option "EnablePageFlip" "true" Option "AGPFastWrite" "true" Option "AGPMode" "2" BusID "PCI:01:00:0" Screen 0 Option "Display" "FP" Option "MonitorLayout" "CRT, LFP" EndSection Section "Screen" Identifier "Screen0" Device "Video0" Monitor "laptop LCD" DefaultDepth 16 Subsection "Display" Depth 32 Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480" EndSubSection Subsection "Display" Depth 24 Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480" EndSubSection Subsection "Display" Depth 16 Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480" EndSubSection Subsection "Display" Depth 8 Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480" EndSubSection EndSection Section "DRI" Mode 0666 EndSection

    Read the article

  • Windows Azure Emulators On Your Desktop

    - by BuckWoody
    Many people feel they have to set up a full Azure subscription online to try out and develop on Windows Azure. But you don’t have to do that right away. In fact, you can download the Windows Azure Compute Emulator – a “cloud development environment” – right on your desktop. No, it’s not for production use, and no, you won’t have other people using your system as a cloud provider, and yes, there are some differences with Production Windows Azure, but you’ll be able code, run, test, diagnose, watch, change and configure code without having any connection to the Internet at all. The best thing about this approach is that when you are ready to deploy the code you’ve been testing, a few clicks deploys it to your subscription when you make one.   So what deep-magic does it take to run such a thing right on your laptop or even a Virtual PC? Well, it’s actually not all that difficult. You simply download and install the Windows Azure SDK (you can even get a free version of Visual Studio for it to run on – you’re welcome) from here: http://msdn.microsoft.com/en-us/windowsazure/cc974146.aspx   This SDK will also install the Windows Azure Compute Emulator and the Windows Azure Storage Emulator – and then you’re all set. Right-click the icon for Visual Studio and select “Run as Administrator”:    Now open a new “Cloud” type of project:   Add your Web and Worker Roles that you want to code:   And when you’re done with your design, press F5 to start the desktop version of Azure:   Want to learn more about what’s happening underneath? Right-click the tray icon with the Azure logo, and select the two emulators to see what they are doing:          In the configuration files, you’ll see a “Use Development Storage” setting. You can call the BLOB, Table or Queue storage and it will all run on your desktop. When you’re ready to deploy everything to Windows Azure, you simply change the configuration settings and add the storage keys and so on that you need.   Want to learn more about all this?   Overview of the Windows Azure Compute Emulator: http://msdn.microsoft.com/en-us/library/gg432968.aspx Overview of the Windows Azure Storage Emulator: http://msdn.microsoft.com/en-us/library/gg432983.aspx January 2011 Training Kit: http://www.microsoft.com/downloads/en/details.aspx?FamilyID=413E88F8-5966-4A83-B309-53B7B77EDF78&displaylang=en      

    Read the article

  • #altnetseattle &ndash; REST Services

    - by GeekAgilistMercenary
    Below are the notes I made in the REST Architecture Session I helped kick off with Andrew. RSS, ATOM, and such needed for better discovery.  i.e. there still is a need for some type of discovery. Difficult is modeling behaviors in a RESTful way.  ??  Invoking some type of state against an object.  For instance in the case of a POST vs. a GET.  The GET is easy, comes back as is, but what about a POST, which often changes some state or something. Challenge is doing multiple workflows with stateful workflows.  How does batch work.  Maybe model the batch as a resource. Frameworks aren’t particularly part of REST, REST is REST.  But point argued that REST is modeled, or part of modeling a state machine of some sort… ? Nothing is 100% reliable w/ REST – comparisons drawn with TCP/IP.  Sufficient probability is made however for the communications, but the idea of a possible failure has to be built into the usage model of REST. Ruby on Rails / RESTfully, and others used.  What were their issues, what do they do.  ATOM feeds, object serialized, using LINQ to XML w/ this.  No state machine libraries. Idempotent areas around REST and single change POST changes are inherent in the architecture. REST – one of the constrained languages is for the interaction w/ the system.  Limiting what can be done on the resources.  - disagreement, there is no agreed upon REST verbs. Sam Ruby – RESTful services.  Expanded the verbs within REST/HTTP pushes you off the web.  Of the existing verbs POST leaves the most up for debate. Robert Reem used Factory to deal with the POST to handle the new state.  The POST identifying what it just did by the return. Different states are put into POST, so that new prospective verbs, without creating verbs for REST/HTTP can be used to advantage without breaking universal clients. Biggest issue with REST services is their lack of state, yet it is also one of their biggest strengths.  What happens is that the client takes up the often onerous task of handling all state, state machines, and other extraneous resource management.  All the GETs, POSTs, DELETEs, INSERTs get all pushed into abstraction.  My 2 cents is that this in a way ends up pushing a huge proprietary burden onto the REST services often removing the point of REST to be simple and to the point. WADL does provide discovery and some state control (sort of?) Statement made, "WADL" isn't needed.  The JSON, XML, or other client side returned data handles this. I then applied the law of 2 feet rule for myself and headed to finish up these notes, post to the Wiki, and figure out what I was going to do next.  For the original Wiki entry check it out here. I will be adding more to this post with a subsequent post.  Please do feel free to post your thoughts and ideas about this, as I am sure everyone in the session will have more for elaboration.

    Read the article

  • Performing an upgrade from TFS 2008 to TFS 2010

    - by Enrique Lima
    I recently had to go through the process of migrating a TFS 2008 SP1 to a TFS 2010 environment. I will go into the details of the tasks that I went through, but first I want to explain why I define it as a migration and not an upgrade. When this environment was setup, based on support and limitations for TFS 2008, we used a 32 bit platform for the TFS Application Tier and Build Servers.  The Data Tier, since we were installing SP1 for TFS 2008, was done as a 64 bit installation.  We knew at that point that TFS 2010 was in the picture so that served as further motivation to make that a 64bit install of SQL Server.  The SQL Server at that point was a single instance (Default) installation too.  We had a pretty good strategy in place for backups of the databases supporting the environment (and this made the migration so much smoother), so we were pretty familiar with the databases and the purpose they serve. I am sure many of you that have gone through a TFS 2008 installation have encountered challenges and trials.  And likely even more so if you, like me, needed to configure your deployment for SSL.  So, frankly I was a little concerned about the process of migrating.  They say practice makes perfect, and this environment I worked on is in some way my brain child, so I was not ready nor willing for this to be a failure or something that would impact my client’s work. Prior to going through the migration process, we did the install of the environment.  The Data Tier was the same, with a new Named instance in place to host the 2010 install.  The Application Tier was in place too, and we did the DefaultCollection configuration to test and validate all components were in place as they should. Anyway, on to the tasks for the migration (thanks to Martin Hinselwood for his very thorough documentation): Close access to TFS 2008, you want to make sure all code is checked in and ready to go.  We stated a difference of 8 hours between code lock and the start of migration to give time for any unexpected delay.  How do we close access?  Stop IIS. Backup your databases.  Which ones? TfsActivityLogging TfsBuild TfsIntegration TfsVersionControl TfsWorkItemTracking TfsWorkItemTrackingAttachments Restore the databases to the new Named Instance (make sure you keep the same names) Now comes the fun part! The actual import/migration of the databases.  A couple of things happen here. The TfsIntegration database will be scanned, the other databases will be checked to validate they exist.  Those databases will go through a process of data being extracted and transferred to the TfsVersionControl database to then be renamed to Tfs_<Collection>. You will be using a tool called tfsconfig and the option import. This tool is located in the TFS 2010 installation path (C:\Program Files\Microsoft Team Foundation Server 2010\Tools),  the command to use is as follows:    tfsconfig import /sqlinstance:<instance> /collectionName:<name> /confirmed Where <instance> is going to be the SQL Server instance where you restored the databases to.  <name> is the name you will give the collection. And to explain /confirmed, well this means you have done a backup of the databases, why?  well remember you are going to merge the databases you restored when you execute the tfsconfig import command. The process will go through about 200 tasks, once it completes go to Team Foundation Server Administration Console and validate your imported databases and contents. We’ll keep this manageable, so the next post is about how to complete that implementation with the SSL configuration.

    Read the article

  • maintaining a growing, diverse codebase with continuous integration

    - by Nate
    I am in need of some help with philosophy and design of a continuous integration setup. Our current CI setup uses buildbot. When I started out designing it, I inherited (well, not strictly, as I was involved in its design a year earlier) a bespoke CI builder that was tailored to run the entire build at once, overnight. After a while, we decided that this was insufficient, and started exploring different CI frameworks, eventually choosing buildbot. One of my goals in transitioning to buildbot (besides getting to enjoy all the whiz-bang extras) was to overcome some of the inadequacies of our bespoke nightly builder. Humor me for a moment, and let me explain what I have inherited. The codebase for my company is almost 150 unique c++ Windows applications, each of which has dependencies on one or more of a dozen internal libraries (and many on 3rd party libraries as well). Some of these libraries are interdependent, and have depending applications that (while they have nothing to do with each other) have to be built with the same build of that library. Half of these applications and libraries are considered "legacy" and unportable, and must be built with several distinct configurations of the IBM compiler (for which I have written unique subclasses of Compile), and the other half are built with visual studio. The code for each compiler is stored in two separate Visual SourceSafe repositories (which I am simply handling using a bunch of ShellCommands, as there is no support for VSS). Our original nightly builder simply took down the source for everything, and built stuff in a certain order. There was no way to build only a single application, or pick a revision, or to group things. It would launched virtual machines to build a number of the applications. It wasn't very robust, it wasn't distributable. It wasn't terribly extensible. I wanted to be able to overcame all of these limitations in buildbot. The way I did this originally was to create entries for each of the applications we wanted to build (all 150ish of them), then create triggered schedulers that could build various applications as groups, and then subsume those groups under an overall nightly build scheduler. These could run on dedicated slaves (no more virtual machine chicanery), and if I wanted I could simply add new slaves. Now, if we want to do a full build out of schedule, it's one click, but we can also build just one application should we so desire. There are four weaknesses of this approach, however. One is our source tree's complex web of dependencies. In order to simplify config maintenace, all builders are generated from a large dictionary. The dependencies are retrieved and built in a not-terribly robust fashion (namely, keying off of certain things in my build-target dictionary). The second is that each build has between 15 and 21 build steps, which is hard to browse and look at in the web interface, and since there are around 150 columns, takes forever to load (think from 30 seconds to multiple minutes). Thirdly, we no longer have autodiscovery of build targets (although, as much as one of my coworkers harps on me about this, I don't see what it got us in the first place). Finally, aformentioned coworker likes to constantly bring up the fact that we can no longer perform a full build on our local machine (though I never saw what that got us, either, considering that it took three times as long as the distributed build; I think he is just paranoically phobic of ever breaking the build). Now, moving to new development, we are starting to use g++ and subversion (not porting the old repository, mind you - just for the new stuff). Also, we are starting to do more unit testing ("more" might give the wrong picture... it's more like any), and integration testing (using python). I'm having a hard time figuring out how to fit these into my existing configuration. So, where have I gone wrong philosophically here? How can I best proceed forward (with buildbot - it's the only piece of the puzzle I have license to work on) so that my configuration is actually maintainable? How do I address some of my design's weaknesses? What really works in terms of CI strategies for large, (possibly over-)complex codebases?

    Read the article

  • DAC pack up all your troubles

    - by Tony Davis
    Visual Studio 2010, or perhaps its apparently-forthcoming sister, "SQL Studio", is being geared up to become the natural way for developers to create databases. Central to this drive is the introduction of 'data-tier application components', or DACs. Applications are developed as normal but when it comes to deployment, instead of supplying the DBA with a bunch of scripts to create the required database objects, the developer creates a single DAC Package ("DAC Pack"); a zipped XML file containing all the database objects needed by the application, along with versioning information, policies for deployment, and so on. It's an intriguing prospect. Developers can work on their development database using their existing tools and source control, and then package up the changes into a single DACPAC for deployment and management. DBAs get an "application level view" of how their instances are being used and the ability to collectively, rather than individually, manage the objects. The DBA needing to manage a large number of relatively small databases can use "DAC snapshots" to get a quick overview of what has changed across all the databases they manage. The reason that DAC packs haven't caused more excitement is that they can only be pushed to SQL Server 2008 R2, and they must be developed or inspected using Visual Studio 2010. Furthermore, what we see right now in VS2010 is more of a 'work-in-progress' or 'vision of the future', with serious shortcomings and restrictions that render it unsuitable for anything but small 'non-critical' departmental databases. The first problem is that DAC packs support a limited set of schema objects (corresponding closely to the features available on 'Azure'). This means that Service Broker queues, CLR Objects, and perhaps most critically security (permissions, certificates etc.), are off-limits. Applications that require these objects will need to add them via a post-deployment TSQL script, rather defeating the whole idea. More worrying still is the process for altering a database with a DAC pack. The grand 'collective' philosophy, whereby a single XML file can be used for deploying and managing builds and changes, extends, unfortunately, to database upgrades. Any change to a database object will result in the creation of a new database, copying the data from the old version, nuking the previous one, and then renaming the new one. Simple eh? The problem is that even something as trivial as adding a comment to a stored procedure in a 5GB database will require the server to find at least twice as much space, as well sufficient elbow-room in the transaction log for copying the largest table. Of course, you'll need to take the database offline for the full course of the deployment, which is likely to take a long time if there is a lot of data. This upgrade/rename process breaks the log chain, makes any subsequent full restore operation highly complicated, and will also break log shipping. As with any grand vision, the devil is always in the detail. It's hard to fathom why Microsoft hasn't used a SQL Compare-style approach to the upgrade process, altering a database with a change script, and this will surely be adopted in the near future. Something had to be in place for VS2010, but right now DAC packs only make sense for Azure. For this, they're cute, but hardly compelling. Nevertheless, DBAs would do well to get familiar with VS 2010 and DAC packs. Like it or not, they're both coming. Cheers, Tony.

    Read the article

  • Laptop monitor stopped working and can't be re-enabled on a Dell Latitude E6410

    - by xektrum
    I'm using Ubuntu 12.04 (upgraded from 11.10), everything seemed to work fine until today when my laptop monitor suddenly stopped working. Here are the facts: My laptop is a Dell Latitude E6410, Intel graphics. External Monitor is attached through a docking station. Everything worked fine for about 6-7 month, then upgraded to 12.04 Issue started today after a week of upgrade. I think the issue started after I ran CounterStrike 1.6, both monitors blinked and then only the attached monitor which is connected to a docking station continued to work I thought at first that was a transient issue but then I've rebooted, removed the battery but the same happens. Laptop Monitor and external monitor work fine up to login screen, but after I login it goes black Whenever I try to re-enable laptop monitor from Display Manager I get errors: The selected configuration for displays could not be applied could not set the configuration for CRTC 63 Not sure what technical details are required but here are some: $ xrandr Screen 0: minimum 320 x 200, current 3120 x 1050, maximum 8192 x 8192 eDP1 connected (normal left inverted right x axis y axis) 1440x900 60.0 + 40.0 VGA1 disconnected (normal left inverted right x axis y axis) HDMI1 connected 1680x1050+0+0 (normal left inverted right x axis y axis) 474mm x 296mm 1680x1050 60.0*+ 1280x1024 75.0 60.0 1152x864 75.0 1024x768 75.1 60.0 800x600 75.0 60.3 640x480 75.0 60.0 720x400 70.1 DP1 disconnected (normal left inverted right x axis y axis) HDMI2 disconnected (normal left inverted right x axis y axis) DP2 disconnected (normal left inverted right x axis y axis) $ tail /var/log/Xorg.0.log [ 8367.132] (WW) intel(0): flip queue failed: Device or resource busy [ 8367.132] (WW) intel(0): Page flip failed: Device or resource busy [ 8367.174] (WW) intel(0): flip queue failed: Device or resource busy [ 8367.174] (WW) intel(0): Page flip failed: Device or resource busy [ 8367.174] (WW) intel(0): flip queue failed: Device or resource busy [ 8367.174] (WW) intel(0): Page flip failed: Device or resource busy [ 8367.265] (WW) intel(0): flip queue failed: Device or resource busy [ 8367.265] (WW) intel(0): Page flip failed: Device or resource busy [ 8367.265] (WW) intel(0): flip queue failed: Device or resource busy [ 8367.265] (WW) intel(0): Page flip failed: Device or resource busy I'm using gnome-shell, and the only ways I've been able to get both display working have been: 1) Booting with laptop disconnected from docking and then re attach external with VGA instead of DVI, but only worked for a session. 2) Removing xserver-xorg-video-intel, but then I gnome-shell is gone as well as dri I would appreciate any suggestions. Regards, ============================= WORKAROUND FOUND ============================= So I have tried few things and here is what worked: I've installed a newer version of xserver-xorg-video-intel (2.19 vs 2.17) from ppa:xorg-edgers/ppa, it didn't work at first, it was only showing low graphics mode, so I tried with a different linux-image 3.0.0-19-generic-pae instead of 3.2.0-24-generic-pae, which I believe is 12.04 precise default, then everything started to work again, Now I've installed 3.4.0-1-generic-pae from same ppa and everything goes flawless so I believe the issue is either with linux-image 3.0.0-19-generic-pae or xserver-xorg-video-intel 2.17. Hope this helps someone in the future. PS: Now xrandr shows multiple modes for my laptop monitor $ xrandr Screen 0: minimum 320 x 200, current 3120 x 1050, maximum 8192 x 8192 eDP1 connected 1440x900+1680+0 (normal left inverted right x axis y axis) 303mm x 189mm 1440x900 60.0*+ 59.9 40.0 1360x768 59.8 60.0 1152x864 60.0 1024x768 60.0 800x600 60.3 56.2 640x480 59.9 VGA1 disconnected (normal left inverted right x axis y axis) HDMI1 connected 1680x1050+0+0 (normal left inverted right x axis y axis) 474mm x 296mm 1680x1050 60.0*+ 1280x1024 75.0 60.0 1152x864 75.0 1024x768 75.1 60.0 800x600 75.0 60.3 640x480 75.0 60.0 720x400 70.1 DP1 disconnected (normal left inverted right x axis y axis) HDMI2 disconnected (normal left inverted right x axis y axis) DP2 disconnected (normal left inverted right x axis y axis)

    Read the article

  • Some Original Expressions

    - by Phil Factor
    Guest Editorial for Simple-Talk newsletterIn a guest editorial for the Simple-Talk Newsletter, Phil Factor wonders if we are still likely to find some more novel and unexpected ways of using the newer features of Transact SQL: or maybe in some features that have always been there! There can be a great deal of fun to be had in trying out recent features of SQL Expressions to see if  they provide new functionality.  It is surprisingly rare to find things that couldn’t be done before, but in a different   and more cumbersome way; but it is great to experiment or to read of someone else making that discovery.  One such recent feature is the ‘table value constructor’, or ‘VALUES constructor’, that managed to get into SQL Server 2008 from Standard SQL.  This allows you to create derived tables of up to 1000 rows neatly within select statements that consist of  lists of row values.  E.g. SELECT Old_Welsh, number FROM (VALUES ('Un',1),('Dou',2),('Tri',3),('Petuar',4),('Pimp',5),('Chwech',6),('Seith',7),('Wyth',8),('Nau',9),('Dec',10)) AS WelshWordsToTen (Old_Welsh, number) These values can be expressions that return single values, including, surprisingly, subqueries. You can use this device to create views, or in the USING clause of a MERGE statement. Joe Celko covered  this here and here.  It can become extraordinarily handy to use once one gets into the way of thinking in these terms, and I’ve rewritten a lot of routines to use the constructor, but the old way of using UNION can be used the same way, but is a little slower and more long-winded. The use of scalar SQL subqueries as an expression in a VALUES constructor, and then applied to a MERGE, has got me thinking. It looks very clever, but what use could one put it to? I haven’t seen anything yet that couldn’t be done almost as  simply in SQL Server 2000, but I’m hopeful that someone will come up with a way of solving a tricky problem, just in the same way that a freak of the XML syntax forever made the in-line  production of delimited lists from an expression easy, or that a weird XML pirouette could do an elegant  pivot-table rotation. It is in this sort of experimentation where the community of users can make a real contribution. The dissemination of techniques such as the Number, or Tally table, or the unconventional ways that the UPDATE statement can be used, has been rapid due to articles and blogs. However, there is plenty to be done to explore some of the less obvious features of Transact SQL. Even some of the features introduced into SQL Server 2000 are hardly well-known. Certain operations on data are still awkward to perform in Transact SQL, but we mustn’t, I think, be too ready to state that certain things can only be done in the application layer, or using a CLR routine. With the vast array of features in the product, and with the tools that surround it, I feel that there is generally a way of getting tricky things done. Or should we just stick to our lasts and push anything difficult out into procedural code? I’d love to know your views.

    Read the article

  • Copying A Slide From One Presentation To Another

    - by Tim Murphy
    There are many ways to generate a PowerPoint presentation using Open XML.  The first way is to build it by hand strictly using the SDK.  Alternately you can modify a copy of a base presentation in place.  The third approach to generate a presentation is to build a new presentation from the parts of an existing presentation by copying slides as needed.  This post will focus on the third option. In order to make this solution a little more elegant I am going to create a VSTO add-in as I did in my previous post.  This one is going to insert Tags to identify slides instead of NonVisualDrawingProperties which I used to identify charts, tables and images.  The code itself is fairly short. SlideNameForm dialog = new SlideNameForm(); Selection selection = Globals.ThisAddIn.Application.ActiveWindow.Selection;   if(dialog.ShowDialog() == DialogResult.OK) { selection.SlideRange.Tags.Add(dialog.slideName,dialog.slideName); } Zeyad Rajabi has a good post here on combining slides from two presentations.  The example he gives is great if you are doing a straight merge.  But what if you want to use your source file as almost a supermarket where you pick and chose slides and may even insert them repeatedly?  The following code uses the tags we created in the previous step to pick a particular slide an copy it to a destination file. using (PresentationDocument newDocument = PresentationDocument.Open(OutputFileText.Text,true)) { PresentationDocument templateDocument = PresentationDocument.Open(FileNameText.Text, false);   uniqueId = GetMaxIdFromChild(newDocument.PresentationPart.Presentation.SlideMasterIdList); uint maxId = GetMaxIdFromChild(newDocument.PresentationPart.Presentation.SlideIdList);   SlidePart oldPart = GetSlidePartByTagName(templateDocument, SlideToCopyText.Text);   SlidePart newPart = newDocument.PresentationPart.AddPart<SlidePart>(oldPart, "sourceId1");   SlideMasterPart newMasterPart = newDocument.PresentationPart.AddPart(newPart.SlideLayoutPart.SlideMasterPart);   SlideIdList idList = newDocument.PresentationPart.Presentation.SlideIdList;   // create new slide ID maxId++; SlideId newId = new SlideId(); newId.Id = maxId; newId.RelationshipId = "sourceId1"; idList.Append(newId);   // Create new master slide ID uniqueId++; SlideMasterId newMasterId = new SlideMasterId(); newMasterId.Id = uniqueId; newMasterId.RelationshipId = newDocument.PresentationPart.GetIdOfPart(newMasterPart); newDocument.PresentationPart.Presentation.SlideMasterIdList.Append(newMasterId);   // change slide layout ID FixSlideLayoutIds(newDocument.PresentationPart);     //newPart.Slide.Save(); newDocument.PresentationPart.Presentation.Save(); } The GetMaxIDFromChild and FixSlideLayoutID methods are barrowed from Zeyad’s article.  The GetSlidePartByTagName method is listed below.  It is really one LINQ query that finds SlideParts with child Tags that have the requested Name. private SlidePart GetSlidePartByTagName(PresentationDocument templateDocument, string tagName) { return (from p in templateDocument.PresentationPart.SlideParts where p.UserDefinedTagsParts.First().TagList.Descendants <DocumentFormat.OpenXml.Presentation.Tag>().First().Name == tagName.ToUpper() select p).First(); } This is what really makes the difference from what Zeyad posted.  The most powerful thing you can have when generating documents from templates is a consistent way of naming items to be manipulated.  I will be show more approaches like this in upcoming posts. del.icio.us Tags: Office Open XML,Presentation,PowerPoint,VSTO,TagList

    Read the article

  • Free RAM disappears - Memory leak?

    - by Izzy
    On a fresh started system, free reports about 1.5G used RAM (8G RAM alltogether, Ubuntu 12.04 with lightdm and plasma desktop, one konsole window started). Having the apps running I use, it still consumes not more than 2G. However, having the system running for a couple of days, more and more of my free RAM disappears -- without showing up in the list of used apps: while smem --pie=name reports less than 20% used (and 80% being available), everything else says differently. free -m for example reports on about day 7: total used free shared buffers cached Mem: 7459 7013 446 0 178 997 -/+ buffers/cache: 5836 1623 Swap: 9536 296 9240 (so you can see, it's not the buffers or the cache). Today this finally ended with the system crashing completely: the windows manager being gone, apps "hanging in the air" (frameless) -- and a popup notifying me about "too many open files". Syslog reports: kernel: [856738.020829] VFS: file-max limit 752838 reached So I closed those applications I was able to close, and killed X using Ctrl-Alt-backspace. X tried to come up again after that with failsafeX, but was unable to do so as it could no longer detect its configuration. So I switched to a console using Ctrl-Alt-F2, captured all information I could think of (vmstat, free, smem, proc/meminfo, lsof, ps aux), and finally rebooted. X again came up with failsafeX; this time I told it to "recover from my backed-up configuration", then switched to a console and successfully used startx to bring up the graphical environment. I have no real clue to what is causing this issue -- though it must have to do either with X itself, or with some user processes running on X -- as after killing X, free -m output looked like this: total used free shared buffers cached Mem: 7459 2677 4781 0 62 419 -/+ buffers/cache: 2195 5263 Swap: 9536 59 9477 (~3.5GB being freed) -- to compare with the output after a fresh start: total used free shared buffers cached Mem: 7459 1483 5975 0 63 730 -/+ buffers/cache: 689 6769 Swap: 9536 0 9536 Two more helpful outputs are provided by memstat -u. Shortly before the crash: User Count Swap USS PSS RSS mail 1 0 200 207 616 whoopsie 1 764 740 817 2300 colord 1 3200 836 894 2156 root 62 70404 352996 382260 569920 izzy 80 177508 1465416 1519266 1851840 After having X killed: User Count Swap USS PSS RSS mail 1 0 184 188 356 izzy 1 1400 708 739 1080 whoopsie 1 848 668 826 1772 colord 1 3204 804 888 1728 root 62 54876 131708 149950 267860 And after a restart, back in X: User Count Swap USS PSS RSS mail 1 0 212 217 628 whoopsie 1 0 1536 1880 5096 colord 1 0 3740 4217 7936 root 54 0 148668 180911 345132 izzy 47 0 370928 437562 915056 Edit: Just added two graphs from my monitoring system. Interesting to see: everytime when there's a "jump" in memory consumption, CPU peaks as well. Just found this right now -- and it reminds me of another indicator pointing to X itself: Often when returning to my machine and unlocking the screen, I found something doing heavvy work on my CPU. Checking with top, it always turned out to be /usr/bin/X :0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch -background none. So after this long explanation, finally my questions: What could be the possible causes? How can I better identify involved processes/applications? What steps could be taken to avoid this behaviour -- short from rebooting the machine all X days? I was running 8.04 (Hardy) for about 5 years on my old machine, never having experienced the like (always more than 100 days uptime, before rebooting for e.g. kernel updates). This now is a complete new machine with a fresh install of 8.04. In case it matters, some specs: AMD A4-3400 APU with Radeon(tm) HD Graphics, using the open-source ati/radeon driver (so no fglrx installed), 8GB RAM, WDC WD1002FAEX-0 hdd (1TB), Asus F1A75-V Evo mainboard. Ubuntu 12.04 64-bit with KDE4/Plasma. Apps usually open more or less permanently include Evolution, Firefox, konsole (with Midnight Commander running inside, about 4 tabs), and LibreOffice -- plus occasionally Calibre, Gimp and Moneyplex (banking software I'm already using for almost 20 years now, in a version which did fine on Hardy).

    Read the article

  • BizTalk Testing Series - The xpath Function

    - by Michael Stephenson
    Background While the xpath function in a BizTalk orchestration is a very powerful feature I have often come across the situation where someone has hard coded an xpath expression in an orchestration. If you have read some of my previous posts about testing I've tried to get across the general theme like test-driven or test-assisted development approaches where the underlying principle is that your building up your solution of small well tested units that are put together and the resulting solution is usually quite robust. You will be finding more bugs within your unit tests and fewer outside of your team. The thing I don't like about the xpath functions usual usage is when you come across an orchestration which has something like the below snippet in an expression or assign shape: string result = xpath(myMessage,"string(//Order/OrderItem/ProductName)"); My main issue with this is that the xpath statement is hard coded in the orchestration and you don't really know it works until you are running the orchestration. Some of the problems I think you end up with are: You waste time with lengthy debugging of the orchestration when your statement isn't working You might not know the function isn't working quite as expected because the testable unit around it is big You are much more open to regression issues if your schema changes     Approach to Testing The technique I usually follow is to hold the xpath statement as a constant in a helper class or to format a constant with a helper function to get the actual xpath statement. It is then used by the orchestration like follows. string result = xpath(myMessage, MyHelperClass.ProductNameXPathStatement); This means that because the xpath statement is available outside of the orchestration it now becomes testable in its own right. This means: I can test it in its own right I'm less likely to waste time tracking down problems caused by an error in the statement I can reduce the risk or regression issuess I'm now able to implement some testing around my xpath statements which usually are something like the following:    The test will use a sample xml file The sample will be validated against the schema The test will execute the xpath statement and then check the results are as expected     Walk-through BizTalk uses the XPathNavigator internally behind the xpath function to implement the queries you will usually use using the navigators select or evaluate functions. In the sample (link at bottom) I have a small solution which contains a schema from which I have generated a sample instance. I will then use this instance as the basis for my tests.     In the below diagram you can see the helper class which I've encapsulated my xpath expressions in, and some helper functions which will format the expression in the case of a repeating node which would want to inject an index into the xpath query.             I have then created a test class which has some functions to execute some queries against my sample xml file. An example of this is below.         In the test class I have a couple of helper functions which will execute the xpath expressions in a similar way to BizTalk. You could have a proper helper class to do this if you wanted.         You can see now in the BizTalk expression editor I can use these functions alongside the xpath function.         Conclusion I hope you can see with very little effort you can make your life much easier by testing xpath statements outside of an orchestration rather than using them directly hard coded into the orchestration.     This can also save you lots of pain longer term because your build should break if your schema changes unexpectedly causing these xpath tests to fail where as your tests around the orchestration will be more difficult to troubleshoot and workout the cause of the problem.     Sample Link The sample is available from the following link: http://code.msdn.microsoft.com/testbtsxpathfunction     Other Tools On the subject of using the xpath function, if you don't already use it the below tool is very useful for creating your xpath statements (thanks BizBert) http://www.bizbert.com/bizbert/2007/11/30/XPath+The+Hidden+Language+Of+BizTalk.aspx

    Read the article

  • HTTP Module in detail

    - by Jalpesh P. Vadgama
    I know this post may sound like very beginner level. But I have already posted two topics regarding HTTP Handler and HTTP module and this will explain how http module works in the system. I have already posted What is the difference between HttpModule and HTTPHandler here. Same way I have posted about an HTTP Handler example here as people are still confused with it. In this post I am going to explain about HTTP Module in detail. What is HTTP Module As we all know that when ASP.NET Runtimes receives any request it will execute a series of HTTP Pipeline extensible objects. HTTP Module and HTTP handler play important role in extending this HTTP Pipelines. HTTP Module are classes that will pre and post process request as they pass into HTTP Pipelines.  So It’s one kind of filter we can say which will do some procession on begin request and end request. If we have to create HTTP Module we have to implement System.Web.IHttpModule interface in our custom class. An IHTTP Module contains two method dispose where you can write your clean up code and another is Init where your can write your custom code to handle request. Here you can your event handler that will execute at the time of begin request and end request. Let’s create an HTTP Module which will just print text in browser with every request. Here is the code for that. using System; using System.Collections.Generic; using System.Linq; using System.Web; namespace Experiment { public class MyHttpModule:IHttpModule { public void Dispose() { //add clean up code here if required } public void Init(HttpApplication context) { context.BeginRequest+=new EventHandler(context_BeginRequest); context.EndRequest+=new EventHandler(context_EndRequest); } public void context_BeginRequest(object o, EventArgs args) { HttpApplication app = (HttpApplication)o; if (app != null) { app.Response.Write("<h1>Begin Request Executed</h1>"); } } public void context_EndRequest(object o, EventArgs args) { HttpApplication app = (HttpApplication)o; if (app != null) { app.Response.Write("<h1>End Request Executed</h1>"); } } } } Here in above code you can see that I have created two event handler context_Beginrequest and context_EndRequest which will execute at begin request and end request when request are processed. In this event handler I have just written a code to print text on browser. Now In order enable this HTTP Module in HTTP pipeline we have to put a settings in web.config  HTTPModules section to tell which HTTPModule is enabled. Below is code for HTTPModule. <configuration> <system.web> <compilation debug="true" targetFramework="4.0" /> <httpModules> <add name="MyHttpModule" type="Experiment.MyHttpModule,Experiment"/> </httpModules> </system.web> </configuration> Now I just have created a sample webform with following code in HTML like following. <form id="form1" runat="server"> <B>test of HTTP Module</B> </form> Now let’s run this web form in browser and you can see here it the output as expected.   Technorati Tags: HTTPModule,ASP.NET,Request

    Read the article

  • Oracle Tutor: XPDL conversion (and why you should care)

    - by mary.keane
    You may have noticed that the Oracle Business Process Converter feature in Tutor 14 supports "XPDL" conversion to Oracle Business Process Analysis Suite (BPA), Oracle Business Process Management Suite (BPM), and Oracle Tutor, and you may have briefly wondered "what is XPDL?" before you moved on to the Visio import feature (a very popular feature in Tutor 14). This posting is for those who do not yet understand (or care) about XPDL and process modeling. Many of us (and I'm including myself) have spent years working in the process definition arena: we've written procedures, designed systems and software to help others write procedures, and have been responsible for embedding policies and procedures into training material for employees. We've worked with tools such as Oracle Tutor, Microsoft Visio, Microsoft Word, and UPK. Most of us have never worked with "modeling tools" before, and we certainly never had to understand BPMN. It's a brave new world in this arena, and companies desperately need people with policy and procedural system expertise to be able to work with system analysts so there is a seamless transfer of knowledge from IT to employees. When working with applications, a picture is worth a thousand words, so eventually you're going to need to understand and be able to work with business process models. XPDL is an acronym for XML Process Definition Language, and it is an interchange format for business process models. It allows you to take a BPMN model that was developed in one workflow application such as BizAgi and import it into another workflow application or a true BPMN management system such as Oracle BPM. Specifically, the XPDL format contains the graphical information of a model as well as any executable information. By using a common format, models can be moved from a basic modeling application used by business owners to applications used by system architects. Over 80 applications support the XPDL format, including MetaStorm ProVision, BEA ALBPM, BizAgi, and Tibco. I mention these applications because we have provided XSLT mapping files specifically for these vendors. Oracle Business Process Converter was designed with user extensibility in mind, and thus users can add their own XML files so that additional XPDL models from other vendors can be converted to BPM, BPA, and Oracle Tutor. Instructions on how to add your own files can be found in Appendix 4 of the Oracle Business Converter manual. Let's take a visual look at how this works. Here is an example of a model devloped in BizAgi: This model can be created by the average business user without a large learning curve, and it's a good start for the system analyst who will be adding web services as well as for the business manager who manages the process described in the model. By exporting this model as XPDL, the information can be converted into Oracle BPA and Oracle BPM as well as converted to Oracle Tutor to become the framework for a procedure. Through this conversion feature, one graphic illustration of a business process can be used by a system analyst, business analyst, business manager, and employee, as seen below. Model Converted to Tutor Procedure Below is the task section of the procedure after conversion from an XPDL file. Model converted to BPA Model converted to BPM End users still want step by step instructions on how to perform their jobs, so procedures (Oracle Tutor) and application simulations (UPK) are still a critical piece of the solution. But IT professionals need graphic descriptions of how the applications work, regardless of whether there are any tasks involving humans. Now there is a way to convert procedures (Oracle Tutor docx files) and basic models (XPDL files) so that business managers and system analysts can share process information. References Wikipedia XPDL. Workflow Management Coalition, XPDL Support and Resources Oracle Business Process Converter manual, Oracle Tutor 14 Oracle Business Process Management 11g If you have any XPDL conversion stories to share, we'd love to hear from you. Best wishes for the coming new year, Mary Keane, Senior Development Manager, Oracle Tutor and BPM

    Read the article

  • wifi hardware switch doesn't work on a Dell 1018

    - by user42566
    I have a problem with my Dell 1018 Inspiron. I can't switch the wifi on, through the key on the keyboard. I think it's a driver problem since Ubuntu 11.10. This are the versions i tried: Ubuntu 10.04 / 10.10 It's possible to install the driver by hand: sudo add-apt-repository ppa:lexical/hwe-wireless sudo apt-get update sudo apt-get install rtl8192ce-dkms Ubuntu 11.04 It works out of the box Ubuntu 11.10 / 12.04 I haven’t found any solution for these versions. The "ppa:lexical/hwe-wireless" doesn't work for these versions. It says Can not find package rtl8192ce-dkms. The window of additional drivers is empty. So I can't install the driver. The wired network works good. Here is some information: 0: dell-wifi: Wireless LAN Soft blocked: no Hard blocked: no 1: phy0: Wireless LAN Soft blocked: no Hard blocked: yes sudo lshw -class network *-network description: Ethernet interface product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:05:00.0 logical name: eth0 version: 05 serial: 5c:26:0a:0d:20:10 size: 10Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=rtl_nic/rtl8105e-1.fw latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:43 ioport:2000(size=256) memory:f0f2c000-f0f2cfff memory:f0f18000-f0f1bfff *-network description: Wireless interface product: RTL8188CE 802.11b/g/n WiFi Adapter vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:07:00.0 logical name: wlan0 version: 01 serial: 70:f1:a1:fe:15:bd width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=rtl8192ce driverversion=3.2.0-22-generic-pae firmware=N/A ip=192.168.1.76 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn resources: irq:17 ioport:3000(size=256) memory:f0100000-f0103fff mark@mark-Inspiron-1018:~$ mark@mark-Inspiron-1018:~$ sudo lspci -nn 00:00.0 Host bridge [0600]: Intel Corporation N10 Family DMI Bridge [8086:a010] 00:02.0 VGA compatible controller [0300]: Intel Corporation N10 Family Integrated Graphics Controller [8086:a011] 00:02.1 Display controller [0380]: Intel Corporation N10 Family Integrated Graphics Controller [8086:a012] 00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 02) 00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 1 [8086:27d0] (rev 02) 00:1c.1 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 2 [8086:27d2] (rev 02) 00:1d.0 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 [8086:27c8] (rev 02) 00:1d.1 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 [8086:27c9] (rev 02) 00:1d.2 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 [8086:27ca] (rev 02) 00:1d.3 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 [8086:27cb] (rev 02) 00:1d.7 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] (rev 02) 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2) 00:1f.0 ISA bridge [0601]: Intel Corporation NM10 Family LPC Controller [8086:27bc] (rev 02) 00:1f.2 SATA controller [0106]: Intel Corporation N10/ICH7 Family SATA Controller [AHCI mode] [8086:27c1] (rev 02) 00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus Controller [8086:27da] (rev 02) 05:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 05) 07:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter [10ec:8176] (rev 01) mark@mark-Inspiron-1018:~$ mark@mark-Inspiron-1018:~$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 174f:1127 Syntek mark@mark-Inspiron-1018:~$

    Read the article

  • Expanding the Partner Ecosystem with Third-Party Plug-ins

    - by Joe Diemer
    Oracle Enterprise Manager’s extensibility capabilities are designed to allow customers and partners to adapt Enterprise Manager for management of heterogeneous environments with Plug-ins and Connectors.  Third-party developers continue to take advantage of Oracle Enterprise Manager’s Extensibility Development Kit (EDK) to build plug-ins to Enterprise Manager 12c, such as F5’s BIG IP Plug-in and Entuity’s Eye of the Storm Network Management Plug-In.  Partners can also validate their plug-ins through the Oracle Validated Integration (OVI) program, which assures customers that the plug-in has been tested and is functionally and technically sound, is designed in a reliable and standardized manner, and operates and performs as documented.   Two very recent examples of partners which have beta versions of their plug-ins are Blue Medora's VMware vSphere plug-in and the NetApp Storage plug-in.  VMware vSphere Plug-in by Blue Medora Blue Medora, an Oracle Partner Network (OPN) “Gold” member, which just announced that it is now signing up customers to try a beta version of their new VMware vSphere plug-in for Enterprise Manager 12c.  According to Blue Medora, the vSphere plug-in monitors critical VMware metrics (CPU, Memory, Disk, Network, etc) at the Host, VM, Cluster and Resource Pool levels.  It has minimal performance impact via an “agentless” approach that requires no installation directly on VMware servers.  It has discovery capabilities for VMware Datacenters, ESX Hosts, Clusters, Virtual Machines, and Datastores.  It offers integration of native VMware Events into Enterprise Manager, and it provides over 300 VMware-related health, availability, performance, and configuration metrics.  It comes with more than 30 out-of-the-box pre-defined thresholds and can manage VMware via a series of jobs split between cluster, host and VM target types.The company reports that the Enterprise Manager 12c plug-in supports vSphere versions 4.0, 4.5 and 5.0.  Platforms supported include Linux 64-bit, Windows, AIX and Solaris SPARC and x86.  Information about the plug-in, including how to sign up for the beta, is available at their web site at http://bluemedora.com after selecting the "Products" tab. NetApp Storage Plug-in NetApp believes the combination of storage system monitoring with comprehensive management of Oracle systems with Enterprise Manager will help customers reduce the cost and complexity of managing applications that rely on NetApp storage and Oracle technologies.  So, NetApp built a plug-in and reports that it has comprehensive availability and performance information for NetApp storage systems.  Using the plug-in, Oracle Enterprise Manager customers with NetApp storage solutions can track the association between databases and storage components and thereby respond to faults and IO performance bottlenecks quickly. With the latest configuration management capabilities, one can also perform drift analysis to make sure all storage systems are configured as per established gold standards. The company is also now signing up beta customers, which can be done at the NetApp Communities site at https://communities.netapp.com/groups/netapp-storage-system-plug-in-for-oem12c-beta. Learn More about Enterprise Manager Extensibility More plug-ins from other partners are soon to come, which I'll be reporting on them here.  To learn more about Enterprise Manager and how customers and partners can build plug-ins using the EDK to manage a multi-vendor data center, go to http://oracle.com/enterprisemanager in the Heterogeneous Management solution area.  The site also lists the plug-ins available with information on how to obtain them.  More info about the Oracle Validated Integration program can be found at the OPN Enterprise Manager Knowledge Zone in the "Develop" tab.

    Read the article

  • OEG11gR2 integration with OES11gR2 Authorization with condition

    - by pgoutin
    Introduction This OES use-case has been defined originally by Subbu Devulapalli (http://accessmanagement.wordpress.com/).  Based on this OES museum use-case, I have developed the OEG11gR2 policy able to deal with the OES authorization with condition. From an OEG point of view, the way to deal with OES condition is to provide with the OES request some Environmental / Context Attributes.   Museum Use-Case  All painting in the museum have security sensors, an alarm goes off when a person comes too close a painting. The employee designated for maintenance needs to use their ID and disable the alarm before maintenance. You are the Security Administrator for the museum and you have been tasked with creating authorization policies to manage authorization for different paintings. Your first task is to understand how paintings are organized. Asking around, you are surprised to see that there isno formal process in place, so you need to start from scratch. the museum tracks the following attributes for each painting 1. Name of the work 2. Painter 3. Condition (good/poor) 4. Cost You compile the list of paintings  Name of Painting  Painter  Paint Condition  Cost  Mona Lisa  Leonardo da Vinci  Good  100  Magi  Leonardo da Vinci  Poor  40  Starry Night  Vincent Van Gogh  Poor  75  Still Life  Vincent Van Gogh  Good  25 Being a software geek who doesn’t (yet) understand art, you feel that price(or insurance price) of a painting is the most important criteria. So you feel that based on years-of-experience employees can be tasked with maintaining different paintings. You decide that paintings worth over 50 cost should be only handled by employees with over 20 years of experience and employees with less than 10 years of experience should not handle any painting. Lets us start with policy modeling. All paintings have a common set of attributes and actions, so it will be good to have them under a single Resource Type. Based on this resource type we will create the actual resources. So our high level model is: 1) Resource Type: Painting which has action manage and the following four attributes a) Name of the work b) Painter c) Condition (good/poor) d) Cost 2) To keep things simple lets use painting name for Resource name (in real world you will try to use some identifier which is unique, because in future we may end up with more than one painting which has the same name.) 3) Create Resources based on the previous table 4) Create an identity attribute Experience (Integer) 5) Create the following authorization policies a) Allow employees with over 20 years experience to access all paintings b) Allow employees with 10 – 20 years of experience to access painting which cost less than 50 c) Deny access to all paintings for employees with less than 10 year of experience OES Authorization Configuration We do need to create 2 authorization policies with specific conditions a) Allow employees with over 20 years experience to access all paintings b) Allow employees with 10 – 20 years of experience to access painting which cost less than 50 c) Deny access to all paintings for employees with less than 10 year of experience We don’t need an explicit policy for Deny access to all paintings for employees with less than 10 year of experience, because Oracle Entitlements Server will automatically deny if there is no matching policy. OEG Policy The OEG policy looks like the following The 11g Authorization filter configuration is similar to :  The ${PAINTING_NAME} and ${USER_EXPERIENCE} variables are initialized by the "Retrieve from the HTTP header" filters for testing purpose. That's to say, under Service Explorer, we need to provide 2 attributes "Experience" & "Painting" following the OES 11g Authorization filter described above.

    Read the article

< Previous Page | 574 575 576 577 578 579 580 581 582 583 584 585  | Next Page >