Search Results

Search found 22383 results on 896 pages for 'package private'.

Page 579/896 | < Previous Page | 575 576 577 578 579 580 581 582 583 584 585 586  | Next Page >

  • Configuring bridged network connection --- Windows 7 host, Ubuntu 10.04 guest --- VMWare Workstation 8

    - by H3br3wHamm3r81
    Here is my IPCONFIG /ALL from the host (Windows 7 64-bit): Here is my IFCONFIG from the guest (Ubuntu 10.04): To be honest, I don't have experience configuring a network between a host and a guest in VMWare (a virtual machine). I've searched high and low on the internet, but I haven't seen anything that can help. Perhaps I'm just not using the right keywords when I search. Nevertheless, does anyone here have any experience with establishing a network connection? Edit: One important note. I don't use DHCP to provide private addresses to the hosts on my LAN. I use "static" IP addresses on my internal network by configuring each IP address manually in the host's network configuration utility (I have TV's, XBOX 360, and a few PC's). I would like to configure the IP on the virtual machine guest manually as well. The reason is because my XBOX 360 only works properly using a static IP address. It will kick me off XBOX Live if it has one given by the router (via DHCP).

    Read the article

  • netsh advfirewall firewall

    - by lehn0058
    I am trying to write a script to configure a windows firewall (server 2008 & 2012 only) to adjust certain firewall settings after a machine has been added to a domain. I need to do this because one of the pre-installed programs on these machines we get only has the firewall rules setup for the public and private firewall profile. This script will be pushed out for other admins to use, and some of the machine will be in other languages. The command to change an existing firewall rule is as follows: netsh advfirewall firewall set rule name = "rule name goes here" new profile=domain This command works great. However, I need to do this for about 10 firewall ports AND since the program could be installed on computers with different languages, I can not just pass the name of all of the firewall rules. Is their some way to do this by supplying the port number? Or some way to specify a regular expression so I could use any rule that has a name LIKE 'test'?

    Read the article

  • DHCP server inside a virtual machine can't see other machines

    - by William
    Hi, I setup a private network from virtual machines and one of the machines is the DHCP server for the group. I want to specify a next-server for the DHCP server but I'm having trouble connecting to any of the machines that I lease IPs to. I'm just trying to do a simple ping/ssh to 10.0.0.252 (a machine with a lease) but it doesn't seem to respond. Any advice? I'm assuming I need to be able to connect to my next-server but maybe I'm wrong. Thanks.

    Read the article

  • Resume on 30 Days of SharePoint

    Dear readers, as you might have noticed... It was an organisational desaster on my end! Even though I continued my studies and research on Microsoft SharePoint 2013 during the last 30 days, I wasn't able to write an article a day to keep you posted on my progress. Nonetheless, I gathered a good number of additional blogs, mainly SharePoint MVP sites, and online forums which will be helpful in the next couple of weeks while I'm actually going to develop a C#-based client which will enable an existing 'legacy' application to SharePoint as a document management system (DMS) besides other already existing solutions. Finding excuses Well, no. Not really. I simply didn't block any or enough time every day to write down my progress during my own challenge. My log book on learning about SharePoint stands at 41 hours and 15 minutes during this month. Which means that I spent an average of more than 1 hour per day on getting into SharePoint. I know that might sound a little bit low but also keep in mind that I went for the challenge on top of my daily job and private responsibilities. During the same period there had been two priority 0 incidents from clients - external root cause - which took presedence over this leisure project. More to come Anyway, it was a first trial and despite the low level of reporting on my blog, I'm confident about what I learned during the last 30 days, and I'm ready to implement the client's requirements. At least, I would say that I have a better understanding about the road map or the path to walk during the next month. As time and secrecy allows I'm going to note down some bits and pieces... During the process of development, I'm going to 'cheat' on the challenge summary article and add links to those new entries. Just for the sake of completeness. Next challenge? Hmm, there had been ideas during the last meetup of the Mauritius Software Craftsmanship Community (MSCC) regarding certifications in IT and eventually we might organise some kind of a study group for specific exams, most probably Microsoft exams towards MCSD Web Developer or Windows Developer.

    Read the article

  • Rebuilding a Mac Mini (early 2009)

    - by Kelly Jones
    This weekend I decided to rebuild the family’s Mac Mini.  It’s the early 2009 model and I hadn’t done it since we got it in March of 2009.  Even worse, I had done the import data step (or whatever Apple calls it) which brought over all of the data files and apps from our previous Mac.  AND that install goes back to before 2005, as far as I can remember.  SO, to say that “cruft” had built up in the operating system, is probably a bit of an understatement. The rebuild went pretty smoothly, especially since I had a couple of spare hard drives.  I hooked up a spare USB drive and formatted it for use with the Mac.  I then used Carbon Copy to clone the internal hard drive onto the USB drive.  (Carbon Copy is a great little app that I used several years ago and I was happy to see it was not only still around, but updated as well.) Once I had my backup, I shut down the Mac and replaced the internal hard drive.  I had purchased the hard drive last fall to use with my work laptop, but I got a new work laptop (with awesome dual SSDs) so I wasn’t using it anymore.  The replacement drive (Seagate Momentus 7200.4 ST9500420AS 500GB 7200 RPM 2.5" SATA 3.0Gb/s Internal Notebook Hard Drive) has more than double the original’s capacity and is also faster.  I’ll have to keep an eye on the temperature, since that 7200 drive will run hotter. Opening the Mac Mini is not for the easily intimidated!  That cool little case is quite the pain to open.  Luckily, OWC put a video together here.  After replacing the drive, I then installed a clean copy of OS 10.5 using the DVDs that came with the Mac.  After the OS, it was time to reinstall the apps.  I downloaded some of the freeware, just to make sure I had the latest versions.  For the rest, I just copied from the backup cloned drive to the new drive.  (I love the way most Mac apps are written – with almost everything contained within a “package” that I can just copy from one drive to another.  MUCH better than the Windows way of using shared DLLs and the registry to store critical pieces that the app needs in order to run!) The whole process took longer than I would have preferred, but it was long overdue.  It definitely “feels” faster, especially boot time and application launches.

    Read the article

  • EmblaCom Oy Maximizes Database Availability and Reduces Costs with MySQL Cluster

    - by Bertrand Matthelié
    Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Headquartered in Finland, EmblaCom Oy provides turnkey and cloud-hosted voice solutions to mobile operators around the globe. Since launching the original mobile private branch exchange (PBX) in 1998, the company has focused on helping its partners provide efficient voice communications to their key business customers. The company’s voice solutions are used by millions of subscribers, worldwide. EmblaCom Oy needed to replace several database engines with a standardized, scalable, development-friendly database solution to maximize availability and cut costs. The company chose MySQL Cluster Carrier Grade Edition, which has maximized accessibility to EmblaCom’s services for its clients and their hundreds of thousands of subscribers. The initiative has also reduced, by half, the cost of the database solution installation for customers, as well as lowered maintenance and customer service costs. Read the entire case study here.

    Read the article

  • Backup solution

    - by user66115
    We are currently looking for a new backup solution. Our current network is 5 remote location with a tape backup in each plant. Right now we are looking at a MPLS VPN and running backups out of our main plant. The main thing that we backup are user private folders and department files. And each plant has it's own file server that houses CAD drawings. My main plan is to have every thing but that CAD drawing at the main faculty. We would start with a main backup of the drawing files and then do change backups back to the main plant. Besides tapes what would be the best way to backup. Our contact at Pc Connection is point us toward a Tandberg Data device.

    Read the article

  • Recommend a web file sharing software please.

    - by Baczek
    I'm looking for a web platform to put company files at. My requirements are: should be accessible via a browser should be open source must be installable (dropbox is a no-go) must have an option to put a access time limit on a file must perform garbage collection automatically after a file expires must be able to mark files as public or private an option to protect a file via a pin-code for users without accounts in the system would be nice to have The problem is I don't even know what to search for - all my googling results in either complete groupware solutions or p2p file sharing software. If such a thing doesn't exist, please don't hestitate to say so, so I can crawl to a corner and cry myself to sleep. TIA

    Read the article

  • How to use ssh-agent (and graphic passphrase dialog) in Kubuntu 10.10?

    - by halo
    I have recently switched from Ubuntu to kubuntu, both version 10.10. Unfortunately in KDE the ssh passphrase dialog doesn't work out of the box. Everytime my ssh private key is used I need to enter my password. This is neither secure nor comfortable. I have done comprehensive research on the net but only found out dated documentation. Several things I tried didn't work out. Current status: SSH setup working with direct passphrase input ssh-agent running in X session $SSH_AUTH_SOCK set to ssh-agent's socket in X session How to enable ssh-agent for keeping the passphrase in memory for ~15mins and as a bonus always use a graphical dialog for its input? I use asymmetric SSH key pairs for pushing/pulling in Git VCS logging remotely into different server systems

    Read the article

  • How to use ssh-agent (and graphic passphrase dialog) in Kubuntu 10.10?

    - by halo
    I have recently switched from Ubuntu to kubuntu, both version 10.10. Unfortunately in KDE the ssh passphrase dialog doesn't work out of the box. Everytime my ssh private key is used I need to enter my password. This is neither secure nor comfortable. I have done comprehensive research on the net but only found out dated documentation. Several things I tried didn't work out. Current status: SSH setup working with direct passphrase input ssh-agent running in X session $SSH_AUTH_SOCK set to ssh-agent's socket in X session How to enable ssh-agent for keeping the passphrase in memory for ~15mins and as a bonus always use a graphical dialog for its input? I use asymmetric SSH key pairs for pushing/pulling in Git VCS logging remotely into different server systems

    Read the article

  • New whitepaper: Evolution from the Traditional Data Center to Exalogic: An Operational Perspective

    - by Javier Puerta
    IT organizations are struggling with the need to balance the day-to-day concerns of data center management against the business level requirements to deliver long-term value. This balancing act has proven difficult and inefficient: systems and application management tools are resource intensive and traditional infrastructure management architectures have developed over time on a project by project basis. These traditional management systems consist of multiple tools that require administrators to waste time performing too many steps to handle routine administrative tasks. Operational efficiency and agility in your enterprise are directly linked to the capabilities provided by the management layer across the entire stack, from the application, middleware, operating system, compute, network and storage. Only when this end to end capability is provided will we experience the full benefit of a scalable, efficient, responsive and secure datacenter. Managing Exalogic is substantially less complex and error prone than managing traditional systems built from individually sourced, multi-vendor components because Exalogic is designed to be administered and maintained as a single, integrated system (Figure 1). It is at the forefront of the industry-wide shift away from costly and inferior one-off platforms toward private clouds and Engineered Systems. Read the full whitepaper "Evolution from the Traditional Data Center to Exalogic: An Operational Perspective". Full document is available for download at the Exadata Partner Community Collaborative Workspace (for community members only - if you get an error message, please register for the Community first).

    Read the article

  • New Whitepaper: Evolution from the Traditional Data Center to Exalogic: An Operational Perspective

    - by Javier Puerta
    IT organizations are struggling with the need to balance the day-to-day concerns of data center management against the business level requirements to deliver long-term value. This balancing act has proven difficult and inefficient: systems and application management tools are resource intensive and traditional infrastructure management architectures have developed over time on a project by project basis. These traditional management systems consist of multiple tools that require administrators to waste time performing too many steps to handle routine administrative tasks. Operational efficiency and agility in your enterprise are directly linked to the capabilities provided by the management layer across the entire stack, from the application, middleware, operating system, compute, network and storage. Only when this end to end capability is provided will we experience the full benefit of a scalable, efficient, responsive and secure datacenter. Managing Exalogic is substantially less complex and error prone than managing traditional systems built from individually sourced, multi-vendor components because Exalogic is designed to be administered and maintained as a single, integrated system (Figure 1). It is at the forefront of the industry-wide shift away from costly and inferior one-off platforms toward private clouds and Engineered Systems. Read the full whitepaper "Evolution from the Traditional Data Center to Exalogic: An Operational Perspective". Full document is available for download at the Exadata Partner Community Collaborative Workspace (for community members only - if you get an error message, please register for the Community first).

    Read the article

  • eCryptfs on ubuntu server : How to keep the home mounted without being over ssh?

    - by Bebeoix
    I have a daemon program who need to read in a file who is saved somewhere in my home folder. But every time I close my ssh connection, this daemon can't read the file because it appear that eCryptfs unmount the home. Maybe there is an option to force eCryptfs to not only mount with an ssh connection ? I didn't found it. Thanks. PS : I know this thread, http://askubuntu.com/questions/165608/why-is-ecryptfs-only-mounting-private-home-directory-over-ssh, but this is not the proper/good way to deal with the request.

    Read the article

  • phpmyadmin error #2002 cannot connect to mysql server

    - by Joe
    so i am getting this error when trying to connect to my mysql server. i have reinstalled MYSQL and php several times and tried a slew of command line work from info around the web.mysql is running and i know that my mysql.sock exists and is located in ~/private/tmp/ and also in ~/tmp/. i also have plenty of hard drive space. i have installed and setup phpmyadmin correctly only adding a password to 'Password for config auth'. AND i have connected to the server via Sequel Pro. so my question is what the heck is going on that i can't connect to the server via phpmyadmin? any guesses? also i'm on a 64-bit intel mac running snow leopard

    Read the article

  • Port Forwarding Using iptables on Ubuntu

    - by user141610
    This is the scenario. I have configured a web-server in MUX. Now I want to access that web-server from Internet. Ubuntu box has two interfaces, One is connected to WAN (Public IP) and another one is connected to MUX (Private IP). MUX has no option to insert default gateway. iptables -t nat -A PREROUTING -p tcp -i eth0 -d 103.x.x.x --dport 8001 -j DNAT --to-destination 192.168.1.2:8080 iptables -A FORWARD -p tcp -d 192.168.1.2 --dport 8080 -m state --state NEW,ESTABLISHED,RELATED -j ACCEPT It does not work. Thanks...

    Read the article

  • Game Asset Management

    - by user964123
    I am making my first small mobile game in C# XNA. Lets say I have 3 screens, the main menu, options and game screen. A single game session usually lasts for 1 min, so the user will alternate frequently between the main menu and game screen. Therefore, once I load the textures for either screen, I want to keep them in memory to avoid frequent reloading. Both screens share some assets like their background textures, but differ in others. The first solution I came up with is making 2 texture factory classes, MainScreenAssetFactory and GameScreenAssetFactory, each with their own content manager, and ill store them in a globally accessible point so that they persist after either screen is destroyed. There is also a OptionsScreenAssetFactory, but that I dont want to cache it since the options screen is rarely visited. A typical Factory would look something like this public class MainScreenAssetFactory { private readonly ContentManager contentManager; public MainScreenAssetFactory(IServiceProvider serviceProvider, string rootDirectory) { contentManager = new ContentManager(serviceProvider) { RootDirectory = rootDirectory }; } public Texture2D ListElementBackground { get { return return contentManager.Load<Texture2D>("UserTab"); } } public Texture2D ListElementBulletPoint { get { return return contentManager.Load<Texture2D>("TabIcon"); } } public Texture2D LoggedOutUser { get { return return contentManager.Load<Texture2D>("LoggedOutUser"); } } } Since both Main, Options and Game Screen share some common resources, instead of loading them more than once, I created another class CommonAssetTexFactory which holds the common stuff and stays in-memory during the app lifetime. For example, this class gets passed to the options screen when it is created. However, given my small game with its few assets, I am already finding this solution cumbersome and inflexible. Changing anything would require looking to see if its already in the common factory, and if not, modifying existing factories and so on. And this is just considering textures currently, i didnt add sound files yet. I cant imagine bigger games with thousands of resources using this approach. A better idea must exist. Would someone please enlighten me?

    Read the article

  • Java Grade Calculator program for class kepp geting the error "Exception in thread "main" java.lang.ArrayIndexOutOfBoundsException." [migrated]

    - by user2880621
    this is my first question I've posted. I've used this site to look at other questions to help with similar problems I've had. After some cursory looking I couldn't find quite the answer I was looking for so I decided to finally succumb and create an account. I am fairly new to java, only a few weeks into my first class. Anyway, my project is to create a program which takes any amount of students and their grades, and then assign them a letter grade. The catch is, however, that it is on a sort of curve and the other grades' letter are dependent on the the highest. Anything equal to or 10 points below the best grade is an a, anything 11-20 points below is a b, and so on. I am to use an array, but I get this error when ran "Exception in thread "main" java.lang.ArrayIndexOutOfBoundsException." I will go ahead and post my code down below. Thanks for any advice you may be able to give. package grade.calculator; import java.util.Scanner; /** * * @author nichol57 */ public class GradeCalculator { /** * @param args the command line arguments */ public static void main(String[] args) { Scanner input = new Scanner(System.in); System.out.println("Enter the number of students"); int number = input.nextInt(); double[]grades = new double [number]; for (int J = number; J >=0; J--) { System.out.println("Enter the students' grades"); grades[J] = input.nextDouble(); } double best = grades[0]; for (int J = 1; J < number; J++) { if (grades[J] >= best){ best = grades[J]; } } for (int J = 0;J < number; J++){ if (grades[J] >= best - 10){ System.out.println("Student " + J + " score is " + grades[J] + " and grade is " + "A"); } else if (grades[J] >= best - 20){ System.out.println("Student " + J + " score is " + grades[J] + " and grade is " + "B"); } else if (grades[J] >= best - 30) { System.out.println("Student " + J + " score is " + grades[J] + " and grade is " + "C"); } else if (grades[J] >= best - 40) { System.out.println("Student " + J + " score is " + grades[J] + " and grade is " + "D"); } else { System.out.println("Student " + J + " score is " + grades[J] + " and grade is " + "F"); } } // end for loop for output }// end main method }

    Read the article

  • Duplicating an instance into a new VPC from a Snapshot

    - by Remmus
    We have a group of instances in an Amazon VPC we use for our live environment. We have a big release to do and want to test that the deployment will run smoothly. I have created a second VPC, created instances of the same size on the same private ips and then removed their original volumes and attached new volumes that were created from snapshots of the live environment. Unfortunately none of the instance will allow me to connect. They start running fine, but I don't get any system logs appear and can't connect. The only thing I can think of is that the new instance was created from a new AMI as the old one is deprecated due to new security fixes. Is this a problem? If so can I fix it in any way? And if this isn't a problem, does anyone have any ideas how I can fix it?

    Read the article

  • How to import Exchange calendars in Google Calendar (No Desktop Outlook)

    - by Tonny Madsen
    I would like to import my calendar from my company Exchange 2010 server as a new calendar in my private Google account. The primary use is to easy my planning when at home with my laptop. I already have access to both the Google and Exchange calendars on my Android phone, but the size of the screen makes it rather difficult to plan anything serious. Note that I run OSX on my laptop I would prefer a Internet based solution to any software on my own laptop. I do not want an Outlook add-in I do not want to include the work related events in my main calendar I do not want a mobile solution I can pay for the solution

    Read the article

  • Raid superblock missing on single parition. Recovery needed!

    - by user171639
    Ok so I have a 2 TB raid 1 setup that has three partitions: sdc1: linux sdc2: swap sdc3: LVM for data However the LVM will no longer mount. So I thought that I would take the first drive, mount it in linux (ive done this b4), and reset the spare drive to copy the data. Normally I can mount a single drive for data recovery using: sudo su apt-get install mdadm lvm2 mdadm --assemble --scan modprobe dm-mod vgscan vgchange -ay c mount -o ro /dev/c/c /mnt Unfortunately, vgscan doesnot recognize the data partition. It appears as though the superblock on the first drive's data partition was erased while syncing with the second. So now I cannot mount that partition and the second drive is stuck in spare mode. Any ideas? Or a way to force mount the data partition just to copy the data? knoppix@Microknoppix:~$ sudo su root@Microknoppix:/home/knoppix# apt-get install mdadm lvm2 Reading package lists... Done Building dependency tree Reading state information... Done lvm2 is already the newest version. mdadm is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 551 not upgraded. root@Microknoppix:/home/knoppix# mdadm --assemble --scan mdadm: /dev/md/1 has been started with 1 drive (out of 2). mdadm: /dev/md/0 has been started with 1 drive (out of 2). root@Microknoppix:/home/knoppix# modprobe dm-mod root@Microknoppix:/home/knoppix# vgscan Reading all physical volumes. This may take a while... No volume groups found root@Microknoppix:/home/knoppix# cat /proc/mdstat Personalities : [raid1] md0 : active raid1 sdc1[2] 4193268 blocks super 1.2 [2/1] [U_] md1 : active raid1 sdc2[2] 524276 blocks super 1.2 [2/1] [U_] unused devices: <none> root@Microknoppix:/home/knoppix# mdadm -v --assemble --auto=yes /dev/md2 /dev/sdc3 mdadm: looking for devices for /dev/md2 mdadm: no recogniseable superblock on /dev/sdc3 mdadm: /dev/sdc3 has no superblock - assembly aborted root@Microknoppix:/home/knoppix# dumpe2fs /dev/md0 | grep -i superblock dumpe2fs 1.42.4 (12-Jun-2012) Primary superblock at 0, Group descriptors at 1-1 Backup superblock at 32768, Group descriptors at 32769-32769 Backup superblock at 98304, Group descriptors at 98305-98305 Backup superblock at 163840, Group descriptors at 163841-163841 Backup superblock at 229376, Group descriptors at 229377-229377 Backup superblock at 294912, Group descriptors at 294913-294913 Backup superblock at 819200, Group descriptors at 819201-819201 Backup superblock at 884736, Group descriptors at 884737-884737 root@Microknoppix:/home/knoppix# Notes: I can read the super block from the spare drive. I was gonna try and restore the superblock from one of the backups, but i dont know how or if this would work. I also heard creating a new array (mdadm --create) using the same parameters will not delete the data on the drive but i didnt want to risk it. Recommendations?

    Read the article

  • Object Oriented Design of a Small Java Game

    - by user2733436
    This is the problem i am dealing with. I have to make a simple game of NIM. I am learning java using a book so far i have only coded programs that deal with 2 classes. This program would have about 4 classes i guess including the main class. My problem is i am having a difficult time designing classes how they will interact with each other. I really want to think and use a object oriented approach. So the first thing i did was design the Pile CLASS as it seemed the easiest and made the most sense to me in terms of what methods go in it. Here is what i have got down for the Pile Class so far. package Nim; import java.util.Random; public class Pile { private int initialSize; public Pile(){ } Random rand = new Random(); public void setPile(){ initialSize = (rand.nextInt(100-10)+10); } public void reducePile(int x){ initialSize = initialSize - x; } public int getPile(){ return initialSize; } public boolean hasStick(){ if(initialSize>0){ return true; } else { return false; } } } Now i need help in designing the Player Class. By that i mean i am not asking for anyone to write code for me as that defeats the purpose of learning i was just wondering how would i design the player class and what would go on it. My guess is that the player class would contain method for choosing move for computer and also receiving the move human user makes. Lastly i am guessing in the Game class i am guessing the turns would be handeled. I am really lost right now so i was wondering if someone can help me think through this problem it would be great. Starting with the player class would be appreciated. I know there are some solutions for this problem online but i refuse to look at because i want to develop my own approach to such problems and i am confident if i can get through this problem i can solve other problems. I apologize if this question is a bit poor but in specific i need help in designing the Player class.

    Read the article

  • Windows Server 2003 Router, Good approach [closed]

    - by jM2.me
    Possible Duplicate: Windows Server 2003 Router with PortForwarding Situation We have Verizon Fios 25/25 Internet Connection, Server acting as a router, and around 12 office computers. Task Portforward port 29000 from office computer. Problem Once I connected wan and lan cables I just had to set static lan ip (on server) and plug in switch with office computers into second nic. Then just right click on wan nic and select share internet connection. All office computers were assigned with an IP address 192.168.0.XXX and Gateway 192.168.0.1 (server). Now I have to open port and portfoward it from computer 192.168.0.190 (static ip, manual). Using this guide http://www.rosscode.com/blog/index.php?title=port_forwarding_in_windows_2003&more=1&c=1&tb=1&pb=1 I faced a problem. Before enabling "RRA" I had to unshare internet connection (wan interface) and was able to setup network. Now how do I setup a network within "RRA" and share internet with private network? Thank you much

    Read the article

  • Unzipping in Java and FileUtil.copy

    - by Geertjan
    Via NetBeans File Systems API, which provides FileUtil.copy below, which means a dependency on NetBeans Utilities API: private void unzipEpubFile(String folder, File file) throws IOException { final AtomicBoolean canceled = new AtomicBoolean(); //define and start progress bar here... // ProgressHandle handle = // ProgressHandleFactory.createHandle( // Bundle.MSG_unpacking(zip.getName()), // new Cancellable() { // @Override // public boolean cancel() { // return canceled.compareAndSet(false, true); // } // }); //then unzip 'file' into 'root": try { List folders = new ArrayList<>(); try (InputStream is = new FileInputStream(file)) { ZipInputStream zis = new ZipInputStream(is); ZipEntry entry; while ((entry = zis.getNextEntry()) != null) { if (canceled.get()) { return; } String n = entry.getName(); File f = new File(folder, n); if (n.endsWith("/")) { if (!f.isDirectory()) { if (!f.mkdirs()) { throw new IOException("could not make " + f); } if (entry.getTime() > 0) { if (!f.setLastModified(entry.getTime())) { // oh well } } } folders.add(f); } else { //handle.progress(Bundle.MSG_creating(n)); File p = f.getParentFile(); if (!p.isDirectory() && !p.mkdirs()) { throw new IOException("could not make " + p); } try (OutputStream os = new FileOutputStream(f)) { FileUtil.copy(zis, os); } if (entry.getTime() > 0) { if (!f.setLastModified(entry.getTime())) { // oh well } } } } } //handle.switchToDeterminate(folders.size()); if (canceled.get()) { } } finally { //stop progress bar } } Mostly from NetBeans IDE sources for working with projects and ZIP files.

    Read the article

  • Why is file sharing over internet still working, despite all firewall exceptions for filesharing being disabled?

    - by Triynko
    Every exception in my windows server firewall that starts with "File and Printer Sharing" is disabled (ordered by name, so that includes domain, public (active), and private profiles). The Network and Sharing Center's options for everything except password protected sharing are off. Why would I still be able to access a network share on that server via an address like "\\my.server.com\" over the internet? The firewall is on for all profiles and blocking incoming connections by default. A "netstat -an" command on the server reveals the share connection is occurring over port 445 (SMB). I restarted the client to ensure it was actually re-establishing a new connection successfully. Is the "Password protected sharing: On" option in Network and Sharing Center bypassing the firewall restrictions, or adding some other exception somewhere that I'm missing? EDIT: "Custom" rules are not the problem. It's the "built-in" rules for Terminal Services that was the problem. Can you believe port 445 (File Sharing Port) has to be wide open to the internet to use Terminal Services Licensing?)

    Read the article

  • EC2 custom topology

    - by Methos
    Is there any way to create a desired topology of EC2 instances? For example, can I create a 3 node topology of nodes A, B, C where C gets the public IP address and B and A are connected to it. Something like: Internet <-- C <-- B <-- A B and A only get private IP addresses and there is no way for the traffic to reach A before hitting B and C. This means I can install whatever I want to install on C and B to filter, cache etc. I'm going through EC2 documentation but so far I have not seen anything that talks about it. I will really appreciate if anyone knows how to do this on EC2

    Read the article

< Previous Page | 575 576 577 578 579 580 581 582 583 584 585 586  | Next Page >