Search Results

Search found 1516 results on 61 pages for 'cards'.

Page 58/61 | < Previous Page | 54 55 56 57 58 59 60 61  | Next Page >

• Is One Tool or a Suite of Tools Better for Scrum?

  - by Rob Wells

  G'day, Edit: We've been using Scrum very successfully for several years on several projects of varying sizes. In fact, our team developed the successful iPlayer project for the BBC using a classical Scrum approach. After using various combinations of tools, some high-tech, some low-tech, across these projects we now wish to try adopting a suitable tool suite. Our manager is to some extent attempting to force the adoption of a single suite of tools for Scrum. I've looked at the SO question "Best Scrum tools" and most people seem to recommend either: a suite of low-tech solutions, e.g. whiteboards, post-its, index cards, etc., or a monolithic tool that tries to satisfy as much as possible of the process, e.g. Agilo, Mingle, ScrumWorks, Target Process, etc. Our team is currently evaluating several different Scrum tools. However, we are looking at selecting a single, monolithic tool, e.g. Agilo. All of the "one-stop" solutions have their strengths and weaknesses with the serious enterprise type solutions being the best sort of fit. But all have some short comings. After reading the paper "Peer Code Review: An Agile Process" over at SmartBear I started wondering if we were trying to force adoption of a tool on a "best fit" basis. I think you can take a couple of reference artefacts of the Scrum development process, say user stories, epics and themes, and the code base which must use a well-known SCM, e.g. SVN, Hg, etc. Then if we take that as the common reference points for the tools employed then we would be able to use a group of tools to handle the different aspects of the Scrum process rather than try forcing a fit of a single tool would is a bit like forcing a square peg into the round hole. In this way, providing you've agreed your common reference points, you can use several tools, each performing their role better than a could be done by a single component in a monolithic tool suite. Is this a more sensible approach? Are the two reference points I mentioned above suitable, or is their a better choice of points where the tools would meet? cheers,

  Read the article

• How to maximize http.sys file upload performance

  - by anelson

  I'm building a tool that transfers very large streaming data sets (possibly on the order of terabytes in a single stream; routinely in the tens of gigabytes) from one server to another. The client portion of the tool will read blocks from the source disk, and send them over the network. The server side will read these blocks off the network and write them to a file on the server disk. Right now I'm trying to decide which transport to use. Options are raw TCP, and HTTP. I really, REALLY want to be able to use HTTP. The HttpListener (or WCF if I want to go that route) make it easy to plug in to the HTTP Server API (http.sys), and I can get things like authentication and SSL for free. The problem right now is performance. I wrote a simple test harness that sends 128K blocks of NULL bytes using the BeginWrite/EndWrite async I/O idiom, with async BeginRead/EndRead on the server side. I've modified this test harness so I can do this with either HTTP PUT operations via HttpWebRequest/HttpListener, or plain old socket writes using TcpClient/TcpListener. To rule out issues with network cards or network pathways, both the client and server are on one machine and communicate over localhost. On my 12-core Windows 2008 R2 test server, the TCP version of this test harness can push bytes at 450MB/s, with minimal CPU usage. On the same box, the HTTP version of the test harness runs between 130MB/s and 200MB/s depending upon how I tweak it. In both cases CPU usage is low, and the vast majority of what CPU usage there is is kernel time, so I'm pretty sure my usage of C# and the .NET runtime is not the bottleneck. The box has two 6-core Xeon X5650 processors, 24GB of single-ranked DDR3 RAM, and is used exclusively by me for my own performance testing. I already know about HTTP client tweaks like ServicePointManager.MaxServicePointIdleTime, ServicePointManager.DefaultConnectionLimit, ServicePointManager.Expect100Continue, and HttpWebRequest.AllowWriteStreamBuffering. Does anyone have any ideas for how I can get HTTP.sys performance beyond 200MB/s? Has anyone seen it perform this well on any environment?

  Read the article

• OpenGL Polygon Stipple Not Working On Different Machine

  - by FranticPedantic

  I have a situation where I am trying to draw a semi-transparent rectangle over a background that is not using openGL and so I can not use blending. I decided to use polygon stippling for a 'screen door transparency' effect as recommended by some. It works fine on my machine and some others, but on some machines with slightly old Intel graphics cards it's failing to render the rectangle at all. If I turn off polygon stipple, it renders fine (but without the stipple). I have compared many of the state variables that I thought might affect it (see code) between machines and they are all the same, and I get no errors. static const GLubyte stipplePatternChkr[128]; //definition omitted for clarity //but works on my machine // stipple the box glPolygonMode(GL_FRONT_AND_BACK, GL_FILL); glColor4ubv(Color(COLORREF_PADGRAY)); glEnable(GL_POLYGON_STIPPLE); glPolygonStipple(stipplePatternChkr); CRect rcStipple(dim); rcStipple.DeflateRect(padding - 1, padding - 1); glBegin(GL_QUADS); glVertex2i(rcStipple.left, rcStipple.bottom); glVertex2i(rcStipple.right, rcStipple.bottom); glVertex2i(rcStipple.right, rcStipple.top); glVertex2i(rcStipple.left, rcStipple.top); glEnd(); glDisable(GL_POLYGON_STIPPLE); int err = glGetError(); if (err != GL_NO_ERROR) { TRACE("glError(%s: %s)\n", s, gluErrorString(err)); } float x; glGetFloatv(GL_UNPACK_ALIGNMENT, &x); TRACE("unpack alignment %f\n", x); glGetFloatv(GL_UNPACK_IMAGE_HEIGHT, &x); TRACE("unpack height %f\n", x); glGetFloatv(GL_UNPACK_LSB_FIRST, &x); TRACE("unpack lsb %f\n", x); glGetFloatv(GL_UNPACK_ROW_LENGTH, &x); TRACE("unpack length %f\n", x); glGetFloatv(GL_UNPACK_SKIP_PIXELS, &x); TRACE("upnack skip %f\n", x); glGetFloatv(GL_UNPACK_SWAP_BYTES, &x); TRACE("upnack swap %f\n", x);

  Read the article

• WPF Storyboard works well, except for the first time it runs. Why?

  - by sofri

  Hi, I'm doing a Surface Application. And there I have something like a bulletin board where little cards with news on it are pinned on. On click they shall fly out of the board and scale bigger. My storyboard works well, except for the first time it runs. It's not a smooth animation then but it scales to its final size immediately and it's the same with the orientation-property. Just the center-property seems to behave correctly. This is an example for one of my Storyboards doing that: Storyboard stb = new Storyboard(); PointAnimation moveCenter = new PointAnimation(); DoubleAnimationUsingKeyFrames changeWidth = new DoubleAnimationUsingKeyFrames(); DoubleAnimationUsingKeyFrames changeHeight = new DoubleAnimationUsingKeyFrames(); DoubleAnimationUsingKeyFrames changeOrientation = new DoubleAnimationUsingKeyFrames(); moveCenter.From = News1.ActualCenter; moveCenter.To = new Point(250, 400); moveCenter.Duration = new Duration(TimeSpan.FromSeconds(1.0)); moveCenter.FillBehavior = FillBehavior.Stop; stb.Children.Add(moveCenter); Storyboard.SetTarget(moveCenter, News1); Storyboard.SetTargetProperty(moveCenter, new PropertyPath(ScatterViewItem.CenterProperty)); changeWidth.Duration = TimeSpan.FromSeconds(1); changeWidth.KeyFrames.Add(new EasingDoubleKeyFrame(266, KeyTime.FromTimeSpan(new System.TimeSpan(0, 0, 1)))); changeWidth.FillBehavior = FillBehavior.Stop; stb.Children.Add(changeWidth); Storyboard.SetTarget(changeWidth, News1); Storyboard.SetTargetProperty(changeWidth, new PropertyPath(FrameworkElement.WidthProperty)); changeHeight.Duration = TimeSpan.FromSeconds(1); changeHeight.KeyFrames.Add(new EasingDoubleKeyFrame(400, KeyTime.FromTimeSpan(new System.TimeSpan(0, 0, 1)))); changeHeight.FillBehavior = FillBehavior.Stop; stb.Children.Add(changeHeight); Storyboard.SetTarget(changeHeight, News1); Storyboard.SetTargetProperty(changeHeight, new PropertyPath(FrameworkElement.HeightProperty)); changeOrientation.Duration = TimeSpan.FromSeconds(1); changeOrientation.KeyFrames.Add(new EasingDoubleKeyFrame(0, KeyTime.FromTimeSpan(new System.TimeSpan(0, 0, 1)))); changeOrientation.FillBehavior = FillBehavior.Stop; stb.Children.Add(changeOrientation); Storyboard.SetTarget(changeOrientation, News1); Storyboard.SetTargetProperty(changeOrientation, new PropertyPath(ScatterViewItem.OrientationProperty)); stb.Begin(this); News1.Center = new Point(250, 400); News1.Orientation = 0; News1.Width = 266; News1.Height = 400; Pin1.Visibility = Visibility.Collapsed; news1IsOutside = true; Scroll1.IsEnabled = true; What's wrong with it?

  Read the article

• Why is it still so hard to write software?

  - by nornagon

  Writing software, I find, is composed of two parts: the Idea, and the Implementation. The Idea is about thinking: "I have this problem; how do I solve it?" and further, "how do I solve it elegantly?" The answers to these questions are obtainable by thinking about algorithms and architecture. The ideas come partially through analysis and partially through insight and intuition. The Idea is usually the easy part. You talk to your friends and co-workers and you nut it out in a meeting or over coffee. It takes an hour or two, plus revisions as you implement and find new problems. The Implementation phase of software development is so difficult that we joke about it. "Oh," we say, "the rest is a Simple Matter of Code." Because it should be simple, but it never is. We used to write our code on punch cards, and that was hard: mistakes were very difficult to spot, so we had to spend extra effort making sure every line was perfect. Then we had serial terminals: we could see all our code at once, search through it, organise it hierarchically and create things abstracted from raw machine code. First we had assemblers, one level up from machine code. Mnemonics freed us from remembering the machine code. Then we had compilers, which freed us from remembering the instructions. We had virtual machines, which let us step away from machine-specific details. And now we have advanced tools like Eclipse and Xcode that perform analysis on our code to help us write code faster and avoid common pitfalls. But writing code is still hard. Writing code is about understanding large, complex systems, and tools we have today simply don't go very far to help us with that. When I click "find all references" in Eclipse, I get a list of them at the bottom of the window. I click on one, and I'm torn away from what I was looking at, forced to context switch. Java architecture is usually several levels deep, so I have to switch and switch and switch until I find what I'm really looking for -- by which time I've forgotten where I came from. And I do that all day until I've understood a system. It's taxing mentally, and Eclipse doesn't do much that couldn't be done in 1985 with grep, except eat hundreds of megs of RAM. Writing code has barely changed since we were staring at amber on black. We have the theoretical groundwork for much more advanced tools, tools that actually work to help us comprehend and extend the complex systems we work with every day. So why is writing code still so hard?

  Read the article

• Can GPU capabilities impact virtual machine performance?

  - by Dave White

  While this many not seem like a programming question directly, it impacts my development activities and so it seems like it belongs here. It seems that more and more developers are turning to virtual environments for development activities on their computers, SharePoint development being a prime example. Also, as a trainer, I have virtual training environments for all of the classes that I teach. I recently purchased a new Dell E6510 to travel around with. It has the i7 620M (Dual core, HyperThreaded cpu running at 2.66GHz) and 8 GB of memory. Reading the spec sheet, it sounded like it would be a great laptop to carry around and run virtual machines on. Getting the laptop though, I've been pretty disappointed with the user experience of developing in a virtual machine. Giving the Virtual Machine 4 GB of memory, it was slow and I could type complete sentences and watch the VM "catchup". My company has training laptops that we provide for our classes. They are Dell Precision M6400 Intel Core 2 Duo P8700 running at 2.54Ghz with 8 GB of memory and the experience on this laptops is night and day compared to the E6510. They are crisp and you barely aware that you are running in a virtual environment. Since the E6510 should be faster in all categories than the M6400, I couldn't understand why the new laptop was slower, so I did a component by component comparison and the only place where the E6510 is less performant than the M6400 is the graphics department. The M6400 is running a nVidia FX 2700m GPU and the E6510 is running a nVidia 3100M GPU. Looking at benchmarks of the two GPUs suggest that the FX 2700M is twice as fast as the 3100M. http://www.notebookcheck.net/Mobile-Graphics-Cards-Benchmark-List.844.0.html 3100M = 111th (E6510) FX 2700m = 47th (Precision M6400) Radeon HD 5870 = 8th (Alienware) The host OS is Windows 7 64bit as is the guest OS, running in Virtual Box 3.1.8 with Guest Additions installed on the guest. The IDE being used in the virtual environment is VS 2010 Premium. So after that long setup, my question is: Is the GPU significantly impacting the virtual machine's performance or are there other factors that I'm not looking at that I can use to boost the vm's performance? Do we now have to consider GPU performance when purchasing laptops where we expect to use virtualized development environments? Thanks in advance. Cheers, Dave

  Read the article

• SQL not yielding expected results

  - by AnonJr

  I have three tables related to this particular query: Lawson_Employees: LawsonID (pk), LastName, FirstName, AccCode (numeric) Lawson_DeptInfo: AccCode (pk), AccCode2 (don't ask, HR set up), DisplayName tblExpirationDates: EmpID (pk), ACLS (date), EP (date), CPR (date), CPR_Imported (date), PALS (date), Note The goal is to get the data I need to report on all those who have already expired in one or more certification, or are going to expire in the next 90 days. Some important notes: This is being run as part of a vbScript, so the 90-day date is being calculated when the script is run. I'm using 2010-08-31 as a placeholder since its the result at the time this question is being posted. All cards expire at the end of the month. (which is why the above date is for the end of August and not 90 days on the dot) A valid EP card supersedes ACLS certification, but only the latter is required of some employees. (wasn't going to worry about it until I got this question answered, but if I can get the help I'll take it) The CPR column contains the expiration date for the last class they took with us. (NULL if they didn't take any classes with us) The CPR_Imported column contains the expiration date for the last class they took somewhere else. (NULL if they didn't take it elsewhere, and bravo for following policy) The distinction between CPR classes is important for other reports. For purposes of this report, all we really care about is which one is the most current - or at least is currently current. If I have to, I'll ignore ACLS and PALS for the time being as it is non-compliance with CPR training that is the big issue at the moment. (not that the others won't be, but they weren't mentioned in the last meeting...) Here's the query I have so far, which is giving me good data: SELECT iEmp.LawsonID, iEmp.LastName, iEmp.FirstName, dept.AccCode2, dept.DisplayName, Exp.ACLS, Exp.EP, Exp.CPR, Exp.CPR_Imported, Exp.PALS, Exp.Note FROM (Lawson_Employees AS iEmp LEFT JOIN Lawson_DeptInfo AS dept ON dept.AccCode = iEmp.AccCode) LEFT JOIN tblExpirationDates AS Exp ON iEmp.LawsonID = Exp.EmpID WHERE iEmp.CurrentEmp = 1 AND ((Exp.ACLS <= #2010-08-31# AND Exp.ACLS IS NOT NULL) OR (Exp.CPR <= #2010-08-31# AND Exp.CPR_Imported <= #2010-08-31#) OR (Exp.PALS <= #2010-08-31# AND Exp.PALS IS NOT NULL)) ORDER BY dept.AccCode2, iEmp.LastName, iEmp.FirstName; After perusing the result set, I think I'm missing some expiration dates that should be in the result set. Am I missing something? This is the sucky part of being the only developer in the department... no one to ask for a little help.

  Read the article

• asp.net mvc 2 multithread

  - by Chris Cap

  I'm getting some weird behavior in asp.net MVC2 (at least it's not what I'm expecting). I have a controller httppost action that processes credit cards. I'm setting a session variable on the server to let me know if a user has attempted to process a card. I clear that session variable when I'm done. I am doing some very quick posts to test the process and the session variable is coming back null everytime because I clear the session variable at the end of the process. I have some debug prints that show me that the all requests are processed synchronously. That is...the first attempt occurs, it fails, session variable is cleared, second attempt tries and fails and the variable is cleared, etc... My first thought was that this was a side effect of debugging and that it just lined requests up for debugging purposes using the local webserver. So I put it on a development server and the same thing is occurring. Multiple submits/posts are processed synchronously. I even put a System.Threading.Sleep in there to make sure it would stop right after I set the session variable and it still won't even START the second request until the first is done. Has anyone else seen this behavior? My understanding was that a worker process was spawned for each request and that these actions could happen asychronously. Here's some psuedo code if (Session["CardCharged"] != null) return RedirectToAction("Index", "Problem"); Session["CardCharged"] = false; //starting the process System.Threading.Thread.Sleep(10000); //charge card here if (!providerResponse.IsApproved) { System.Diagnostics.Debug.WriteLine("failed"); Session["CardCharged"] = null; //have to allow them to charge again since this failed return View(myModel); } Session["CardCharged"] = true; return RedirectToAction("Index", "OrderComplete"); I should mention that my code ALWAYS fails the credit card check for testing purposes. I'm trying to test the situation where processing is STILL occurring and redirect the user elsewhere. I have set a dummy session variable elsewhere to assure that the session id "sticks". So I know the session id is the same for each request. Thanks

  Read the article

• Need help with tweaking a Dropdown with three options, user selects one - a hidden div appears with correct fields

  - by Jack

  Hello Again, I posted a question on here and got an answer within minutes I'm hoping the wizards on here can help me again. Okay so I'm using a script I found online to try and add this function to a shopping cart form. Here's the setup. I have a payment method dropdown with Visa, Mastercard and Bank Withdrawal as the options. For the credit cards I have one hidden div with a certain set of fields, and for the bank I have another hidden div. Each of the divs have named ID's - #payCredit and #payBank The css for both have margin: 0px and display: none; Here's a peice of javascript I used successfuly on a shipping address checkbox `function toggleLayer( whichLayer ) { var elem, vis; if( document.getElementById ) // this is the way the standards work elem = document.getElementById( whichLayer ); else if( document.all ) // this is the way old msie versions work elem = document.all[whichLayer]; else if( document.layers ) // this is the way nn4 works elem = document.layers[whichLayer]; vis = elem.style; // if the style.display value is blank we try to figure it out here if(vis.display==''&&elem.offsetWidth!=undefined&&elem.offsetHeight!=undefined) vis.display = (elem.offsetWidth!=0&&elem.offsetHeight!=0)?'block':'none'; vis.display = (vis.display==''||vis.display=='block')?'none':'block'; }` I was hoping I could change it slightly to meet my needs. Here's the dropdown <label>Payment Method:</label> <select name="payment" id="payment" class="dropdown3" style="width:8em"> <option selected="selected">Select</option> <option value="Visa" onclick="javascript:toggleLayer('payCredit');">Visa</option> <option value="MasterCard" onclick="javascript:toggleLayer('payCredit');">Mastercard</option> <option value="Direct" onclick="javascript:toggleLayer('payBank');">Direct Withdraw</option> </select></li> The current result is that it kinda works. I can open the dropdown and select Visa and it appears, if I select Visa again it disappears, if I select Visa and then select bank, both appear. You can see what i'm working on here - http://test.sharevetcare.com/bestfriends/cart3.html

  Read the article

• Week in Geek: LastPass Rescues Xmarks Edition

  - by Asian Angel

  This week we learned how to breathe new life into an aging Windows Mobile 6.x device, use filters in Photoshop, backup and move VirtualBox machines, use the BitDefender Rescue CD to clean an infected PC, and had fun setting up a pirates theme on our computers. Photo by _nash. Weekly Feature Do you love using the Faenza icon set on your Ubuntu system but feel that there are a few much needed icons missing (or you desire a different version of a particular icon)? Then you may want to take a look at the Faenza Variants icon pack. The icons are available in the following sizes: 16px, 22px, 32px, 48px and scalable sizes. Photo by Asian Angel. Faenza Variants Random Geek Links Another week with extra link goodness to help keep you on top of the news. Photo by Asian Angel. LastPass acquires Xmarks, premium service announced Xmarks announced that it has been acquired by LastPass, a cross-platform password management service. This also means that Xmarks is now in transition from a “free” to a “freemium” business model. WikiLeaks reappears on European Net domains WikiLeaks has re-emerged on a Swiss Internet domain followed by domains in Germany, Finland, and the Netherlands, sidestepping a move that had in effect taken the controversial site off the Internet. Iran: Yes, Stuxnet hurt our nuclear program The Stuxnet worm got some big play from Iranian President Mahmoud Ahmadinejad, who acknowledged that the malware dinged his nuclear program. More Windows Rogues than Just AV – Fake Defragmenter Check Disk Don’t think for a second that rogues are limited to scareware, because as so-called products such as “System Defragmenter”, “Scan Disk” “Check Disk” prove, they’re not. Internet Explorer’s Protected Mode can be bypassed Researchers from Verizon Business have now described a way of bypassing Protected Mode in IE 7 and 8 in order to gain access to user accounts. Can you really see who viewed your Facebook profile? Rogue application spreads virally Once again, a rogue application is spreading virally between Facebook users pretending to offer you a way of seeing who has viewed your profile. More holes in Palm’s WebOS Researchers Orlando Barrera and Daniel Herrera, who both work for security firm SecTheory, have discovered a gaping security hole in Palm’s WebOS smartphone operating system. Next-gen banking Trojans hit APAC With the proliferation of banking Trojans, Web and smartphone users of online banking services have to be on constant alert to avoid falling prey to fraud schemes, warned Etay Maor, project manager for RSA Fraud Action. AVG update cripples 64-bit computers A signature update automatically deployed by the AVG virus scanner Thursday has crippled numerous computers. Article includes link to forums to fix computers affected after a restart. Congress moves to outlaw ‘mystery charges’ for Web shoppers Legislation that makes it illegal for Web merchants and so-called post-transaction marketers to charge credit cards without the card owners’ say-so came closer to becoming law this week. Ballmer Set to “Look Into” Windows Home Server Drive Extender Fiasco Tuesday’s announcement from Microsoft regarding the removal of Drive Extender from Windows Home Server has sent shock waves across the web. Google tweaks search recipe to ding scam artists Google has changed its search algorithm to penalize sites deemed to provide an “extremely poor user experience” following a New York Times story on a merchant who justified abusive behavior towards customers as a search-engine optimization tactic. Geek Video of the Week Watch as our two friends debate back and forth about the early adoption of new technology through multiple time periods (Stone Age to the far future). Will our reluctant friend finally succumb to the temptation? Photo by CollegeHumor. Early Adopters Through History Random TinyHacker Links Fix Issues in Windows 7 Using Reliability Monitor Learn how to analyze Windows 7 errors and then fix them using the built-in reliability monitor. Learn About IE Tab Groups Tab groups is a useful feature in IE 8. Here’s a detailed guide to what it is all about. Google’s Book Helps You Learn About Browsers and Web A cool new online book by the Google Chrome team on browsers and the web. TrustPort Internet Security 2011 – Good Security from a Less Known Provider TrustPort is not exactly a well-known provider of security solutions. At least not in the consumer space. This review tests in detail their latest offering. How the World is Using Cell phones An infographic showing the shocking demographics of cell phone use. Super User Questions See the great answers to these questions from Super User. I am unable to access my C drive. It says it is unable to display current owner. List of Windows special directories/shortcuts like ‘%TEMP%’ Is using multiple passes for wiping a disk really necessary? How can I view two files side by side in Notepad++ Is there any tool that automatically puts screenshots to my Dropbox? How-To Geek Weekly Article Recap Look through our hottest articles from this past week at How-To Geek. How to Create a Software RAID Array in Windows 7 9 Alternatives for Windows Home Server’s Drive Extender Why Doesn’t Disk Cleanup Delete Everything from the Temp Folder? Ask the Readers: How Much Do You Customize Your Operating System? How to Upload Really Large Files to SkyDrive, Dropbox, or Email One Year Ago on How-To Geek Enjoy reading through these awesome articles from one year ago. How To Upgrade from Vista to Windows 7 Home Premium Edition How To Fix No Aero Transparency in Windows 7 Troubleshoot Startup Problems with Startup Repair Tool in Windows 7 & Vista Rename the Guest Account in Windows 7 for Enhanced Security Disable Error Reporting in XP, Vista, and Windows 7 The Geek Note That wraps things up here for this week. Regardless of the weather wherever you may be, we hope that you have an opportunity to get outside and have some fun! Remember to keep sending those great tips in to us at [email protected]. Photo by Tony the Misfit. Latest Features How-To Geek ETC The How-To Geek Guide to Learning Photoshop, Part 8: Filters Get the Complete Android Guide eBook for Only 99 Cents [Update: Expired] Improve Digital Photography by Calibrating Your Monitor The How-To Geek Guide to Learning Photoshop, Part 7: Design and Typography How to Choose What to Back Up on Your Linux Home Server How To Harmonize Your Dual-Boot Setup for Windows and Ubuntu Hang in There Scrat! – Ice Age Wallpaper How Do You Know When You’ve Passed Geek and Headed to Nerd? On The Tip – A Lamborghini Theme for Chrome and Iron What if Wile E. Coyote and the Road Runner were Human? [Video] Peaceful Winter Cabin Wallpaper Store Tabs for Later Viewing in Opera with Tab Vault

  Read the article

• I have finally traded my Blackberry in for a Droid!

  - by Bob Porter

  Over the years I have used a number of different types of phones. Windows Mobile, Blackberry, Nokia, and now Android. Until the Blackberry, which was my last phone (and I still have one issued from my office) I had never found a phone that “just worked” especially with email and messaging. The Blackberry did, and does, excel at those functions. My last personal phone was a Storm 1 which was Blackberry’s first touch screen phone. The Storm 2 was an improved version that fixed some screen press detection issues from the first model and it added Wifi. Over the last few years I have watched others acquire and fall in love with their ‘Droid’s including a number of iPhone users which surprised me. Our office has until recently only supported Blackberry phones, adding iPhones within the last year or so. When I spoke with our internal telecom folks they confirmed they were evaluating Android phones, but felt they still were not secure enough out of the box for corporate use and SOX compliance. That being said, as a personal phone, the Droid Rocks! I am impressed with its speed, the number of apps available, and the overall design. It is not as “flashy” as an iPhone but it does everything that I care about and more. The model I bought is the Motorola Droid 2 Global from Verizon. It is currently running Android 2.2 for it’s OS, 2.3 is just around the corner. It has 8 gigs of internal flash memory and can handle up to a 32 gig SDCard. (I currently have 2 8 gig cards, one for backups, and have ordered a 16 gig card!) Being a geek at heart, I “rooted” the phone which means gained superuser access to the OS on the phone. And opens a number of doors for further modifications down the road. Also being a geek meant I have already setup a development environment and built and deployed the obligatory “Hello Droid” application. I will be writing of my development experiences with this new platform here often, to start off I thought I would share my current application list to give you an idea what I am using. Zedge: http://market.android.com/details?id=net.zedge.android XDA: http://market.android.com/details?id=com.quoord.tapatalkxda.activity WRAL.com: http://market.android.com/details?id=com.mylocaltv.wral Wireless Tether: http://market.android.com/details?id=android.tether Winamp: http://market.android.com/details?id=com.nullsoft.winamp Win7 Clock: http://market.android.com/details?id=com.androidapps.widget.toggles.win7 Wifi Analyzer: http://market.android.com/details?id=com.farproc.wifi.analyzer WeatherBug: http://market.android.com/details?id=com.aws.android Weather Widget Forecast Addon: http://market.android.com/details?id=com.androidapps.weather.forecastaddon Weather & Toggle Widgets: http://market.android.com/details?id=com.androidapps.widget.weather2 Vlingo: http://market.android.com/details?id=com.vlingo.client VirtualTENHO-G: http://market.android.com/details?id=jp.bustercurry.virtualtenho_g Twitter: http://market.android.com/details?id=com.twitter.android TweetDeck: http://market.android.com/details?id=com.thedeck.android.app Tricorder: http://market.android.com/details?id=org.hermit.tricorder Titanium Backup PRO: http://market.android.com/details?id=com.keramidas.TitaniumBackupPro Titanium Backup: http://market.android.com/details?id=com.keramidas.TitaniumBackup Terminal Emulator: http://market.android.com/details?id=jackpal.androidterm Talking Tom Free: http://market.android.com/details?id=com.outfit7.talkingtom Stock Blue: http://market.android.com/details?id=org.adw.theme.stockblue ST: Red Alert Free: http://market.android.com/details?id=com.oldplanets.redalertwallpaper ST: Red Alert: http://market.android.com/details?id=com.oldplanets.redalertwallpaperplus Solitaire: http://market.android.com/details?id=com.kmagic.solitaire Skype: http://market.android.com/details?id=com.skype.raider Silent Time Lite: http://market.android.com/details?id=com.QuiteHypnotic.SilentTime ShopSavvy: http://market.android.com/details?id=com.biggu.shopsavvy Shopper: http://market.android.com/details?id=com.google.android.apps.shopper Shiny clock: http://market.android.com/details?id=com.androidapps.clock.shiny ShareMyApps: http://market.android.com/details?id=com.mattlary.shareMyApps Sense Glass ADW Theme: http://market.android.com/details?id=com.dtanquary.senseglassadwtheme ROM Manager: http://market.android.com/details?id=com.koushikdutta.rommanager Roboform Bookmarklet Installer: http://market.android.com/details?id=roboformBookmarkletInstaller.android.com RealCalc: http://market.android.com/details?id=uk.co.nickfines.RealCalc Package Buddy: http://market.android.com/details?id=com.psyrus.packagebuddy Overstock: http://market.android.com/details?id=com.overstock OMGPOP Toggle: http://market.android.com/details?id=com.androidapps.widget.toggle.omgpop OI File Manager: http://market.android.com/details?id=org.openintents.filemanager nook: http://market.android.com/details?id=bn.ereader MyAtlas-Google Maps Navigation ext: http://market.android.com/details?id=com.adaptdroid.navbookfree3 MSN Droid: http://market.android.com/details?id=msn.droid.im Matrix Live Wallpaper: http://market.android.com/details?id=com.jarodyv.livewallpaper.matrix LogMeIn: http://market.android.com/details?id=com.logmein.ignitionpro.android Liveshare: http://market.android.com/details?id=com.cooliris.app.liveshare Kobo: http://market.android.com/details?id=com.kobobooks.android Instant Heart Rate: http://market.android.com/details?id=si.modula.android.instantheartrate IMDb: http://market.android.com/details?id=com.imdb.mobile Home Plus Weather: http://market.android.com/details?id=com.androidapps.widget.skin.weather.homeplus Handcent SMS: http://market.android.com/details?id=com.handcent.nextsms H7C Clock: http://market.android.com/details?id=com.androidapps.widget.clock.skin.h7c GTasks: http://market.android.com/details?id=org.dayup.gtask GPS Status: http://market.android.com/details?id=com.eclipsim.gpsstatus2 Google Voice: http://market.android.com/details?id=com.google.android.apps.googlevoice Google Sky Map: http://market.android.com/details?id=com.google.android.stardroid Google Reader: http://market.android.com/details?id=com.google.android.apps.reader GoMarks: http://market.android.com/details?id=com.androappsdev.gomarks Goggles: http://market.android.com/details?id=com.google.android.apps.unveil Glossy Black Weather: http://market.android.com/details?id=com.androidapps.widget.weather.skin.glossyblack Fox News: http://market.android.com/details?id=com.foxnews.android Foursquare: http://market.android.com/details?id=com.joelapenna.foursquared FBReader: http://market.android.com/details?id=org.geometerplus.zlibrary.ui.android Fandango: http://market.android.com/details?id=com.fandango Facebook: http://market.android.com/details?id=com.facebook.katana Extensive Notes Pro: http://market.android.com/details?id=com.flufflydelusions.app.extensive_notes_donate Expense Manager: http://market.android.com/details?id=com.expensemanager Espresso UI (LightShow w/ Slide): http://market.android.com/details?id=com.jaguirre.slide.lightshow Engadget: http://market.android.com/details?id=com.aol.mobile.engadget Earth: http://market.android.com/details?id=com.google.earth Drudge: http://market.android.com/details?id=com.iavian.dreport Dropbox: http://market.android.com/details?id=com.dropbox.android DroidForums: http://market.android.com/details?id=com.quoord.tapatalkdrodiforums.activity DroidArmor ADW: http://market.android.com/details?id=mobi.addesigns.droidarmorADW Droid Weather Icons: http://market.android.com/details?id=com.androidapps.widget.weather.skins.white Droid 2 Bootstrapper: http://market.android.com/details?id=com.koushikdutta.droid2.bootstrap doubleTwist: http://market.android.com/details?id=com.doubleTwist.androidPlayer Documents To Go: http://market.android.com/details?id=com.dataviz.docstogo Digital Clock Widget: http://market.android.com/details?id=com.maize.digitalClock Desk Home: http://market.android.com/details?id=com.cowbellsoftware.deskdock Default Clock: http://market.android.com/details?id=com.androidapps.widget.clock.skins.defaultclock Daily Expense Manager: http://market.android.com/details?id=com.techahead.ExpenseManager ConnectBot: http://market.android.com/details?id=org.connectbot Colorized Weather Icons: http://market.android.com/details?id=com.androidapps.widget.weather.colorized Chrome to Phone: http://market.android.com/details?id=com.google.android.apps.chrometophone CardStar: http://market.android.com/details?id=com.cardstar.android Books: http://market.android.com/details?id=com.google.android.apps.books Black Ipad Toggle: http://market.android.com/details?id=com.androidapps.toggle.widget.skin.blackipad Black Glass ADW Theme: http://market.android.com/details?id=com.dtanquary.blackglassadwtheme Bing: http://market.android.com/details?id=com.microsoft.mobileexperiences.bing BeyondPod Unlock Key: http://market.android.com/details?id=mobi.beyondpod.unlockkey BeyondPod: http://market.android.com/details?id=mobi.beyondpod BeejiveIM: http://market.android.com/details?id=com.beejive.im Beautiful Widgets Animations Addon: http://market.android.com/details?id=com.levelup.bw.forecast Beautiful Widgets: http://market.android.com/details?id=com.levelup.beautifulwidgets Beautiful Live Weather: http://market.android.com/details?id=com.levelup.beautifullive BBC News: http://market.android.com/details?id=net.jimblackler.newswidget Barnacle Wifi Tether: http://market.android.com/details?id=net.szym.barnacle Barcode Scanner: http://market.android.com/details?id=com.google.zxing.client.android ASTRO SMB Module: http://market.android.com/details?id=com.metago.astro.smb ASTRO Pro: http://market.android.com/details?id=com.metago.astro.pro ASTRO Bluetooth Module: http://market.android.com/details?id=com.metago.astro.network.bluetooth ASTRO: http://market.android.com/details?id=com.metago.astro AppBrain App Market: http://market.android.com/details?id=com.appspot.swisscodemonkeys.apps App Drawer Icon Pack: http://market.android.com/details?id=com.adwtheme.appdrawericonpack androidVNC: http://market.android.com/details?id=android.androidVNC AndroidGuys: http://market.android.com/details?id=com.handmark.mpp.AndroidGuys Android System Info: http://market.android.com/details?id=com.electricsheep.asi AndFTP: http://market.android.com/details?id=lysesoft.andftp ADWTheme Red: http://market.android.com/details?id=adw.theme.red ADWLauncher EX: http://market.android.com/details?id=org.adwfreak.launcher ADW.Theme.One: http://market.android.com/details?id=org.adw.theme.one ADW.Faded theme: http://market.android.com/details?id=com.xrcore.adwtheme.faded ADW Gingerbread: http://market.android.com/details?id=me.robertburns.android.adwtheme.gingerbread Advanced Task Killer Free: http://market.android.com/details?id=com.rechild.advancedtaskkiller Adobe Reader: http://market.android.com/details?id=com.adobe.reader Adobe Flash Player 10.1: http://market.android.com/details?id=com.adobe.flashplayer Adobe AIR: http://market.android.com/details?id=com.adobe.air 3G Auto OnOff: http://market.android.com/details?id=com.yuantuo --- Generated by ShareMyApps http://market.android.com/details?id=com.mattlary.shareMyApps Sent from my Droid

  Read the article

• TFS, G.I. Joe and Under-doing

  If I were to rank the most consistently irritating parts of my work day, using TFS would come in first by a wide margin. Even repeated network outages this week seem like a pleasant reprieve from this monolithic beast. This is not a reflexive anti-Microsoft feeling, that attitude just wouldnt work for a consultant who does .NET development. It is also not an utter dismissal of TFS as worthless; Ive seen people use it effectively on several projects. So why? Ill start with a laundry list of shortcomings. An out of the box UI for work items that is insultingly bad, a source control system that is confoundingly fragile when handling merges, folder renames and long file names, the arcane XML wizardry necessary to customize a template and a build system that adds an extra layer of oddness on top of msbuild. Im sure my legion of readers will soon point out to me how I can work around all these issues, how this is fixed in TFS 2010 or with this add-in, and how once you have everything set up, youre fine. And theyd be right, any one of these problems could be worked around. If not dirty laundry, what else? I thought about it for a while, and came to the conclusion that TFS is so irritating to me because it represents a vision of software development that I find unappealing. To expand upon this, lets start with some wisdom from those great PSAs at the end of the G.I. Joe cartoons of the 80s: Now you know, and knowing is half the battle. In software development, Id go further and say knowing is more than half the battle. Understanding the dimensions of the problem you are trying to solve, the needs of the users, the value that your software can provide are more than half the battle. Implementation of this understanding is not easy, but it is not even possible without this knowledge. Assuming we have a fixed amount of time and mental energy for any project, why does this spell trouble for TFS? If you think about what TFS is doing, its offering you a huge array of options to track the day to day implementation of your project. From tasks, to code churn, to test coverage. All valuable metrics, but only in exchange for valuable time to get it all working. In addition, when you have a shiny toy like TFS, the temptation is to feel obligated to use it. So the push from TFS is to encourage a project manager and team to focus on process and metrics around process. You can get great visibility, and graphs to show your project stakeholders, but none of that is important if you are not implementing the right product. Not just unimportant, these activities can be harmful as they drain your time and sap your creativity away from the rest of the project. To be more concrete, lets suppose your organization has invested the time to create a template for your projects and trained people in how to use it, so there is no longer a big investment of time for each project to get up and running. First, Id challenge if that template could be specific enough to be full featured and still applicable for any project. Second, the very existence of this template would be a indication to a project manager that the success of their project was somehow directly related to fitting management of that project into this format. Again, while the capabilities are wonderful, the mirage is there; just get everything into TFS and your project will run smoothly. Ill close the loop on this first topic by proposing a thought experiment. Think of the projects youve worked on. How many times have you been chagrined to discover youve implemented the wrong feature, misunderstood how a feature should work or just plain spent too much time on a screen that nobody uses? That sounds like a really worthwhile area to invest time in improving. How about going back to these projects and thinking about how many times you wished you had optimized the state change flow of your tasks or been embarrassed to not have a code churn report linked back to the latest changeset? With thanks to the Real American Heroes, Ill move on to a more current influence, that of the developers at 37signals, and their philosophy towards software development. This philosophy, fully detailed in the books Getting Real and Rework, is a vision of software that under does the competition. This is software that is deliberately limited in functionality in order to concentrate fully on making sure ever feature that is there is awesome and needed. Why is this relevant? Well, in one of those fun seeming paradoxes in life, constraints can be a spark for creativity. Think Twitter, the small screen of an iPhone, the limitations of HTML for applications, the low memory limits of older or embedded system. As long as there is some freedom within those constraints, amazing things emerge. For project management, some of the most respected people in the industry recommend using just index cards, pens and tape. They argue that with change the constant in software development, your process should be as limited (yet rigorous) as possible. Looking at TFS, this is not a system designed to under do anybody. It is a big jumble of components and options, with every feature you could think of. Predictably this means many basic functions are hard to use. For task management, many people just use an Excel spreadsheet linked up to TFS. Not a stirring endorsement of the tooling there. TFS as a whole would be far more appealing to me if there was less of it, but better. Id cut 50% of the features to make the other half really amaze and inspire me. And thats really the heart of the matter. TFS has great promise and I want to believe it can work better. But ultimately it focuses your attention on a lot of stuff that doesnt really matter and then clamps down your creativity in a mess of forms and dialogs obscuring what does.   --- Relevant Links --- All those great G.I. Joe PSAs are on YouTube, including lots of mashed up versions. A simple Google search will get you on the right track.Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• Interview with Lenz Grimmer about MySQL Connect

  - by Keith Larson

  Keith Larson: Thank you for allowing me to do this interview with you.  I have been talking with a few different Oracle ACEs   about the MySQL Connect Conference. I figured the MySQL community might be missing you as well. You have been very busy with Oracle Linux but I know you still have an eye on the MySQL Community. How have things been?Lenz Grimmer: Thanks for including me in this series of interviews, I feel honored! I've read the other interviews, and really liked them. I still try to follow what's going on over in the MySQL community and it's good to see that many of the familiar faces are still around. Over the course of the 9 years that I was involved with MySQL, many colleagues and contacts turned into good friends and we still maintain close relationships.It's been almost 1.5 years ago that I moved into my new role here in the Linux team at Oracle, and I really enjoy working on a Linux distribution again (I worked for SUSE before I joined MySQL AB in 2002). I'm still learning a lot - Linux in the data center has greatly evolved in so many ways and there are a lot of new and exciting technologies to explore. Keith Larson: What were your thoughts when you heard that Oracle was going to deliver the MySQL Connect conference to the MySQL Community?Lenz Grimmer: I think it's testament to the fact that Oracle deeply cares about MySQL, despite what many skeptics may say. What started as "MySQL Sunday" two years ago has now evolved into a full-blown sub-conference, with 80 sessions at one of the largest corporate IT events in the world. I find this quite telling, not many products at Oracle enjoy this level of exposure! So it certainly makes me feel proud to see how far MySQL has come. Keith Larson: Have you had a chance to look over the sessions? What are your thoughts on them?Lenz Grimmer: I did indeed look at the final schedule.The content committee did a great job with selecting these sessions. I'm glad to see that the content selection was influenced by involving well-known and respected members of the MySQL community. The sessions cover a broad range of topics and technologies, both covering established topics as well as recent developments. Keith Larson: When you get a chance, what sessions do you plan on attending?Lenz Grimmer: I will actually be manning the Oracle booth in the exhibition area on one of these days, so I'm not sure if I'll have a lot of time attending sessions. But if I do, I'd love to see the keynotes and catch some of the sessions that talk about recent developments and new features in MySQL, High Availability and Clustering . Quite a lot has happened and it's hard to keep up with this constant flow of new MySQL releases.In particular, the following sessions caught my attention: MySQL Connect Keynote: The State of the Dolphin Evaluating MySQL High-Availability Alternatives CERN’s MySQL “as a Service” Deployment with Oracle VM: Empowering Users MySQL 5.6 Replication: Taking Scalability and High Availability to the Next Level What’s New in MySQL Server 5.6? MySQL Security: Past and Present MySQL at Twitter: Development and Deployment MySQL Community BOF MySQL Connect Keynote: MySQL Perspectives Keith Larson: So I will ask you just like I have asked the others I have interviewed, any tips that you would give to people for handling the long hours at conferences?Lenz Grimmer: Wear comfortable shoes and make sure to drink a lot! Also prepare a plan of the sessions you would like to attend beforehand and familiarize yourself with the venue, so you can get to the next talk in time without scrambling to find the location. The good thing about piggybacking on such a large conference like Oracle OpenWorld is that you benefit from the whole infrastructure. For example, there is a nice schedule builder that helps you to keep track of your sessions of interest. Other than that, bring enough business cards and talk to people, build up your network among your peers and other MySQL professionals! Keith Larson: What features of the MySQL 5.6 release do you look forward to the most ?Lenz Grimmer: There has been solid progress in so many areas like the InnoDB Storage Engine, the Optimizer, Replication or Performance Schema, it's hard for me to really highlight anything in particular. All in all, MySQL 5.6 sounds like a very promising release. I'm confident it will follow the tradition that Oracle already established with MySQL 5.5, which received a lot of praise even from very critical members of the MySQL community. If I had to name a single feature, I'm particularly and personally happy that the precise GIS functions have finally made it into a GA release - that was long overdue. Keith Larson:  In your opinion what is the best reason for someone to attend this event?Lenz Grimmer: This conference is an excellent opportunity to get in touch with the key people in the MySQL community and ecosystem and to get facts and information from the domain experts and developers that work on MySQL. The broad range of topics should attract people from a variety of roles and relations to MySQL, beginning with Developers and DBAs, to CIOs considering MySQL as a viable solution for their requirements. Keith Larson: You will be attending MySQL Connect and have some Oracle Linux Demos, do you see a growing demand for MySQL on Oracle Linux ?Lenz Grimmer: Yes! Oracle Linux is our recommended Linux distribution and we have a good relationship to the MySQL engineering group. They use Oracle Linux as a base Linux platform for development and QA, so we make sure that MySQL and Oracle Linux are well tested together. Setting up a MySQL server on Oracle Linux can be done very quickly, and many customers recognize the benefits of using them both in combination.Because Oracle Linux is available for free (including free bug fixes and errata), it's an ideal choice for running MySQL in your data center. You can run the same Linux distribution on both your development/staging systems as well as on the production machines, you decide which of these should be covered by a support subscription and at which level of support. This gives you flexibility and provides some really attractive cost-saving opportunities. Keith Larson: Since I am a Linux user and fan, what is on the horizon for  Oracle Linux?Lenz Grimmer: We're working hard on broadening the ecosystem around Oracle Linux, building up partnerships with ISVs and IHVs to certify Oracle Linux as a fully supported platform for their products. We also continue to collaborate closely with the Linux kernel community on various projects, to make sure that Linux scales and performs well on large systems and meets the demands of today's data centers. These improvements and enhancements will then rolled into the Unbreakable Enterprise Kernel, which is the key ingredient that sets Oracle Linux apart from other distributions. We also have a number of ongoing projects which are making good progress, and I'm sure you'll hear more about this at the upcoming OpenWorld conference :) Keith Larson: What is something that more people should be aware of when it comes to Oracle Linux and MySQL ?Lenz Grimmer: Many people assume that Oracle Linux is just tuned for Oracle products, such as the Oracle Database or our Engineered Systems. While it's of course true that we do a lot of testing and optimization for these workloads, Oracle Linux is and will remain a general-purpose Linux distribution that is a very good foundation for setting up a LAMP-Stack, for example. We also provide MySQL RPM packages for Oracle Linux, so you can easily stay up to date if you need something newer than what's included in the stock distribution.One more thing that is really unique to Oracle Linux is Ksplice, which allows you to apply security patches to the running Linux kernel, without having to reboot. This ensures that your MySQL database server keeps up and running and is not affected by any downtime. Keith Larson: What else would you like to add ?Lenz Grimmer: Thanks again for getting in touch with me, I appreciated the opportunity. I'm looking forward to MySQL Connect and Oracle OpenWorld and to meet you and many other people from the MySQL community that I haven't seen for quite some time! Keith Larson:  Thank you Lenz!

  Read the article

• Big Data – Is Big Data Relevant to me? – Big Data Questionnaires – Guest Post by Vinod Kumar

  - by Pinal Dave

  This guest post is by Vinod Kumar. Vinod Kumar has worked with SQL Server extensively since joining the industry over a decade ago. Working on various versions of SQL Server 7.0, Oracle 7.3 and other database technologies – he now works with the Microsoft Technology Center (MTC) as a Technology Architect. Let us read the blog post in Vinod’s own voice. I think the series from Pinal is a good one for anyone planning to start on Big Data journey from the basics. In my daily customer interactions this buzz of “Big Data” always comes up, I react generally saying – “Sir, do you really have a ‘Big Data’ problem or do you have a big Data problem?” Generally, there is a silence in the air when I ask this question. Data is everywhere in organizations – be it big data, small data, all data and for few it is bad data which is same as no data :). Wow, don’t discount me as someone who opposes “Big Data”, I am a big supporter as much as I am a critic of the abuse of this term by the people. In this post, I wanted to let my mind flow so that you can also think in the direction I want you to see these concepts. In any case, this is not an exhaustive dump of what is in my mind – but you will surely get the drift how I am going to question Big Data terms from customers!!! Is Big Data Relevant to me? Many of my customers talk to me like blank whiteboard with no idea – “why Big Data”. They want to jump into the bandwagon of technology and they want to decipher insights from their unexplored data a.k.a. unstructured data with structured data. So what are these industry scenario’s that come to mind? Here are some of them: Financials Fraud detection: Banks and Credit cards are monitoring your spending habits on real-time basis. Customer Segmentation: applies in every industry from Banking to Retail to Aviation to Utility and others where they deal with end customer who consume their products and services. Customer Sentiment Analysis: Responding to negative brand perception on social or amplify the positive perception. Sales and Marketing Campaign: Understand the impact and get closer to customer delight. Call Center Analysis: attempt to take unstructured voice recordings and analyze them for content and sentiment. Medical Reduce Re-admissions: How to build a proactive follow-up engagements with patients. Patient Monitoring: How to track Inpatient, Out-Patient, Emergency Visits, Intensive Care Units etc. Preventive Care: Disease identification and Risk stratification is a very crucial business function for medical. Claims fraud detection: There is no precise dollars that one can put here, but this is a big thing for the medical field. Retail Customer Sentiment Analysis, Customer Care Centers, Campaign Management. Supply Chain Analysis: Every sensors and RFID data can be tracked for warehouse space optimization. Location based marketing: Based on where a check-in happens retail stores can be optimize their marketing. Telecom Price optimization and Plans, Finding Customer churn, Customer loyalty programs Call Detail Record (CDR) Analysis, Network optimizations, User Location analysis Customer Behavior Analysis Insurance Fraud Detection & Analysis, Pricing based on customer Sentiment Analysis, Loyalty Management Agents Analysis, Customer Value Management This list can go on to other areas like Utility, Manufacturing, Travel, ITES etc. So as you can see, there are obviously interesting use cases for each of these industry verticals. These are just representative list. Where to start? A lot of times I try to quiz customers on a number of dimensions before starting a Big Data conversation. Are you getting the data you need the way you want it and in a timely manner? Can you get in and analyze the data you need? How quickly is IT to respond to your BI Requests? How easily can you get at the data that you need to run your business/department/project? How are you currently measuring your business? Can you get the data you need to react WITHIN THE QUARTER to impact behaviors to meet your numbers or is it always “rear-view mirror?” How are you measuring: The Brand Customer Sentiment Your Competition Your Pricing Your performance Supply Chain Efficiencies Predictive product / service positioning What are your key challenges of driving collaboration across your global business?  What the challenges in innovation? What challenges are you facing in getting more information out of your data? Note: Garbage-in is Garbage-out. Hold good for all reporting / analytics requirements Big Data POCs? A number of customers get into the realm of setting a small team to work on Big Data – well it is a great start from an understanding point of view, but I tend to ask a number of other questions to such customers. Some of these common questions are: To what degree is your advanced analytics (natural language processing, sentiment analysis, predictive analytics and classification) paired with your Big Data’s efforts? Do you have dedicated resources exploring the possibilities of advanced analytics in Big Data for your business line? Do you plan to employ machine learning technology while doing Advanced Analytics? How is Social Media being monitored in your organization? What is your ability to scale in terms of storage and processing power? Do you have a system in place to sort incoming data in near real time by potential value, data quality, and use frequency? Do you use event-driven architecture to manage incoming data? Do you have specialized data services that can accommodate different formats, security, and the management requirements of multiple data sources? Is your organization currently using or considering in-memory analytics? To what degree are you able to correlate data from your Big Data infrastructure with that from your enterprise data warehouse? Have you extended the role of Data Stewards to include ownership of big data components? Do you prioritize data quality based on the source system (that is Facebook/Twitter data has lower quality thresholds than radio frequency identification (RFID) for a tracking system)? Do your retention policies consider the different legal responsibilities for storing Big Data for a specific amount of time? Do Data Scientists work in close collaboration with Data Stewards to ensure data quality? How is access to attributes of Big Data being given out in the organization? Are roles related to Big Data (Advanced Analyst, Data Scientist) clearly defined? How involved is risk management in the Big Data governance process? Is there a set of documented policies regarding Big Data governance? Is there an enforcement mechanism or approach to ensure that policies are followed? Who is the key sponsor for your Big Data governance program? (The CIO is best) Do you have defined policies surrounding the use of social media data for potential employees and customers, as well as the use of customer Geo-location data? How accessible are complex analytic routines to your user base? What is the level of involvement with outside vendors and third parties in regard to the planning and execution of Big Data projects? What programming technologies are utilized by your data warehouse/BI staff when working with Big Data? These are some of the important questions I ask each customer who is actively evaluating Big Data trends for their organizations. These questions give you a sense of direction where to start, what to use, how to secure, how to analyze and more. Sign off Any Big data is analysis is incomplete without a compelling story. The best way to understand this is to watch Hans Rosling – Gapminder (2:17 to 6:06) videos about the third world myths. Don’t get overwhelmed with the Big Data buzz word, the destination to what your data speaks is important. In this blog post, we did not particularly look at any Big Data technologies. This is a set of questionnaire one needs to keep in mind as they embark their journey of Big Data. I did write some of the basics in my blog: Big Data – Big Hype yet Big Opportunity. Do let me know if these questions make sense?  Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: Big Data, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL

  Read the article

• Dual head setup for Ubuntu 10.04.1 and Windows XP Pro with same hardware configuration

  - by mejpark

  Hello. I have a Dell OptiPlex 360 workstation at work, with 2 x ATI RV280 [Radeon 9200 PRO] graphics cards installed, which are attached to two identical 19" HII flat panel monitors. I'm using the open source Radeon driver with Ubuntu, and the proprietary drivers with Windows. The good news is that dual head configuration works for both OSes. The bad news is, I have to use a different hardware configuration for each OS to achieve this. Hardware config #1: Dual monitors work for Windows XP Pro like this: First display -> external VGA port Second display -> DVI input on gfx card Hardware config #2: Dual monitors work for Ubuntu 10.04.1 like this: First display -> VGA port on gfx card Second display -> DVI input on gfx card I connected up the displays according to Config #2 and booted up Windows, which resulted in a mirror image on both screens. I was unable to login, as the login box was not visible. I unplugged the VGA lead from gfx card and plugged it into the external VGA port (Config #1) - Windows dual head works again, but the VGA-connected screen is not recognised by Ubuntu and remains in standby mode. Is it possible to configure a dual head setup for Ubuntu using Config #1, or am I missing something? I tried setting up dual monitors using Config #1, this morning which didn't work. By default, there is no xorg.conf file in Ubuntu 10.04.1, so I generated one using: $ sudo X :2 -configure X.Org X Server 1.7.6 Release Date: 2010-03-17 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.24-27-server i686 Ubuntu Current Operating System: Linux harrier 2.6.32-24-generic #42-Ubuntu SMP Fri Aug 20 14:24:04 UTC 2010 i686 Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-24-generic root=UUID=a34c1931-98d4-4a34-880c-c227a2936c4a ro quiet splash Build Date: 21 July 2010 12:47:34PM xorg-server 2:1.7.6-2ubuntu7.3 (For technical support please see http://www.ubuntu.com/support) Current version of pixman: 0.16.4 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.2.log", Time: Mon Sep 13 10:02:02 2010 List of video drivers: apm ark intel mach64 s3virge trident mga tseng ati nouveau neomagic i740 openchrome voodoo s3 i128 radeon siliconmotion nv ztv vmware v4l chips rendition savage sisusb tdfx geode sis r128 cirrus fbdev vesa (++) Using config file: "/home/michael/xorg.conf.new" (==) Using config directory: "/usr/lib/X11/xorg.conf.d" (II) [KMS] No DRICreatePCIBusID symbol, no kernel modesetting. Xorg detected your mouse at device /dev/input/mice. Please check your config if the mouse is still not operational, as by default Xorg tries to autodetect the protocol. Xorg has configured a multihead system, please check your config. Your xorg.conf file is /home/michael/xorg.conf.new To test the server, run 'X -config /home/michael/xorg.conf.new' ddxSigGiveUp: Closing log $ sudo X -config /home/michael/xorg.conf.new Fatal server error: Server is already active for display 0 If this server is no longer running, remove /tmp/.X0-lock and start again. Please consult the The X.Org Foundation support at http://wiki.x.org for help. ddxSigGiveUp: Closing log I then booted Ubuntu in failsafe mode, dropped into root shell, and executed $ X -config /home/michael/xorg.conf.new again. The screen went blank and turned off, so I reset the machine. There must be a way round this. Any help to set up a dual head config for Ubuntu using Config #1 would be hugely appreciated. TIA, Mike

  Read the article

• How to Organize a Programming Language Club

  - by Ben Griswold

  I previously noted that we started a language club at work.  You know, I searched around but I couldn’t find a copy of the How to Organize a Programming Language Club Handbook. Maybe it’s sold out?  Yes, Stack Overflow has quite a bit of information on how to learn and teach new languages and there’s also a good number of online tutorials which provide language introductions but I was interested in group learning.  After   two months of meetings, I present to you the Unofficial How to Organize a Programming Language Club Handbook.  1. Gauge interest. Start by surveying prospects. “Excuse me, smart-developer-whom-I-work-with-and-I-think-might-be-interested-in-learning-a-new-coding-language-with-me. Are you interested in learning a new language with me?” If you’re lucky, you work with a bunch of really smart folks who aren’t shy about teaching/learning in a group setting and you’ll have a collective interest in no time.  Simply suggesting the idea is the only effort required.  If you don’t work in this type of environment, maybe you should consider a new place of employment.  2. Make it official. Send out a “Welcome to the Club” email: There’s been talk of folks itching to learn new languages – Python, Scala, F# and Haskell to name a few.  Rather than taking on new languages alone, let’s learn in the open.  That’s right.  Let’s start a languages club.  We’ll have everything a real club needs – secret handshake, goofy motto and a high-and-mighty sense that we’re better than everybody else. T-shirts?  Hell YES!  Anyway, I’ve thrown this idea around the office and no one has laughed at me yet so please consider this your very official invitation to be in THE club. [Insert your ideas about how the club might be run, solicit feedback and suggestions, ask what other folks would like to get out the club, comment about club hazing practices and talk up the T-shirts even more. Finally, call out the languages you are interested in learning and ask the group for their list.] 3.  Send out invitations to the first meeting.  Don’t skimp!  Hallmark greeting cards for everyone.  Personalized.  Hearts over the I’s and everything.  Oh, and be sure to include the list of suggested languages with vote count.  Here the list of languages we are interested in: Python 5 Ruby 4 Objective-C 3 F# 2 Haskell 2 Scala 2 Ada 1 Boo 1 C# 1 Clojure 1 Erlang 1 Go 1 Pi 1 Prolog 1 Qt 1 4.  At the first meeting, there must be cake.  Lots of cake. And you should tackle some very important questions: Which language should we start with?  You can immediately go with the top vote getter or you could do as we did and designate each person to provide a high-level review of each of the proposed languages over the next two weeks.  After all presentations are completed, vote on the language. Our high-level review consisted of answers to a series of questions. Decide how often and where the group will meet.  We, for example, meet for a brown bag lunch every Wednesday.  Decide how you’re going to learn.  We determined that the best way to learn is to just dive in and write code.  After choosing our first language (Python), we talked about building an application, or performing coding katas, but we ultimately choose to complete a series of Project Euler problems.  We kept it simple – each member works out the same two problems each week in preparation of a code review the following Wednesday. 5.  Code, Review, Learn.  Prior to the weekly meeting, everyone uploads their solutions to our internal wiki.  Each Project Euler problem has a dedicated page.  In the meeting, we use a really fancy HD projector to show off each member’s solution.  It is very important to use an HD projector.  Again, don’t skimp!  Each code author speaks to their solution, everyone else comments, applauds, points fingers and laughs, etc.  As much as I’ve learned from solving the problems on my own, I’ve learned at least twice as much at the group code review.  6.  Rinse. Lather. Repeat.  We’ve hosted the language club for 7 weeks now.  The first meeting just set the stage.  The next two meetings provided a review of the languages followed by a first language selection.  The remaining meetings focused on Python and Project Euler problems.  Today we took a vote as to whether or not we’re ready to switch to another language and/or another problem set.  Pretty much everyone wants to stay the course for a few more weeks at least.  Until then, we’ll continue to code the next two solutions, review and learn. Again, we’ve been having a good time with the programming language club.  I’m glad it got off the ground.  What do you think?  Would you be interested in a language club?  Any suggestions on what we might do better?

  Read the article

• Customize the Five Windows Folder Templates

  - by Mark Virtue

  Are you’re particular about the way Windows Explorer presents each folder’s contents? Here we show you how to take advantage of Explorer’s built-in templates, which cuts down the time it takes to do customizations. Note: The techniques in this article apply to Windows XP, Vista, and Windows 7. When opening a folder for the first time in Windows Explorer, we are presented with a standard default view of the files and folders in that folder. It may be that the items are presented are perfectly fine, but on the other hand, we may want to customize the view.  The aspects of it that we can customize are the following: The display type (list view, details, tiles, thumbnails, etc) Which columns are displayed, and in which order The widths of the visible columns The order in which the files and folders are sorted Any file groupings Thankfully, Windows offers us a shortcut.  A particular folder’s settings can be used as a “template” for other, similar folders.  In fact, we can store up to five separate sets of folder presentation configurations.  Once we save the settings for a particular template, that template can then be applied to other folders. Customize Your First Folder We’ll start by setting up the first of our templates – the default one.  Once we create this template and apply it, the vast majority of the folders in our file system will change to match it, so it’s important that we set it up very carefully.  The first step in creating and applying the template is to customize one folder with the settings that all the rest will have. Choose a folder that is typical of the folders that you wish to have this default template.  Select it in Windows Explorer.  To ensure that it is a suitable candidate, right-click the folder name and select Properties, then go to the Customize tab.  Ensure that this folder is marked as General Items.  If it is not, either choose a different folder or select General Items from the list. Click OK.  Now we’re ready to customize our first folder. Changing the way one single folder is presented is straightforward.  We start with the folder’s display type.  Click the Change your view button in the top-right corner of every Explorer window. Each time you click the button, the folder’s view cycles to the next view type.  Alternatively you can click the little down-arrow next to the button to see all the display types at once, and select the one you want. Click the view you want, or drag the slider next to the one you want. If you have chosen Details, then the next thing you may wish to change is which columns are displayed, and the order of these.  To choose which columns are displayed, simply right-click on any column heading.  A list of the columns currently being display appears. Simply uncheck a column if you don’t want it displayed, and check the columns that you want displayed.  If you want some information displayed about your files that is not listed here, then click the More… button for a full list of file attributes. There’s a lot of them! To change the order of the columns that are currently being displayed, simply click on a column heading and drag it to where you think it should be.  To change the width of a column, click the line that represents the right-hand edge of the column and drag it left or right. To sort by a column, click once on that column.  To reverse the sort-order, click that same column again. To change the groupings of the files in the folder, right-click in a blank area of the folder, select Group by, and select the appropriate column. Apply This Default Template to All Similar Folders Once you have the folder exactly the way you want it, we now use this folder as our default template for most of the folders in our file system.  To do this, ensure that you are still in the folder you just customized, and then, from the Organize menu in Explorer, click on Folder and search options. Then select the View tab and click the Apply to Folders button. After you’ve clicked OK, visit some of the other folders in your file system.  You should see that most have taken on these new settings. What we’ve just done, in effect, is we have customized the General Items template.  This is one of five templates that Windows Explorer uses to display folder contents.  The five templates are called (in Windows 7): General Items Documents Pictures Music Videos When a folder is opened, Windows Explorer examines the contents to see if it can automatically determine which folder template to use to display the folder contents.  If it is not obvious that the folder contents falls into any of the last four templates, then Windows Explorer chooses the General Items template.  That’s why most of the folders in your file system are shown using the General Items template. Changing the Other Four Templates If you want to adjust the other four templates, the process is very similar to what we’ve just done.  If you wanted to change the “Music” template, for example, the steps would be as follows: Select a folder that contains music items Apply the existing Music template to the folder (even if it doesn’t look like you want it to) Customize the folder to your personal preferences Apply the new template to all “Music” folders A fifth step would be:  When you open a folder that contains music items but is not automatically displayed using the Music template, you manually select the Music template for that folder. First, select a folder that contains music items.  It will probably be displayed using the existing Music template: Next, ensure that it is using the Music template.  If it’s not, then manually select the Music template. Next, customize the folder to suit your personal preferences (here we’ve added a couple of columns, and sorted by Artist). Now we can set this view to be our Music template.  Choose Organize, then the View tab, and click the Apply to Folders button. Note: The only folders that will inherit these settings are the ones that are currently (or will soon be) using the Music template. Now, if you have any folder that contains music items, and you want it to inherit all of these settings, then right-click the folder name, choose Properties, and select that this folder should use the Music template.  You can also cehck the box entitled Also apply this template to all subfolders if you want to save yourself even more time with all the sub-folders. Conclusion It’s neat to be able to set up templates for your folder views like this.  It’s a shame that Microsoft didn’t take the concept just a little further and allow you to create as many templates as you want. Similar Articles Productive Geek Tips Fix For When Windows Explorer in Vista Stops Showing File NamesCustomize the Windows 7 or Vista Send To MenuFix for New Contact Group Button Not Displaying in VistaWhy Did Windows Vista’s Music Folder Icon Turn Yellow?Make Your Last Minute Holiday Cards with Microsoft Word TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Office 2010 reviewed in depth by Ed Bott FoxClocks adds World Times in your Statusbar (Firefox) Have Fun Editing Photo Editing with Citrify Outlook Connector Upgrade Error Gadfly is a cool Twitter/Silverlight app Enable DreamScene in Windows 7

  Read the article

• Finding a person in the forest

  - by PointsToShare

  © 2011 By: Dov Trietsch. All rights reserved finding a person in the forest or Limiting the AD result in SharePoint People Picker There are times when we need to limit the SharePoint audience of certain farms or servers or site collections to a particular audience. One of my experiences involved limiting access to US citizens, another to a particular location. Now, most of us – your humble servant included – are not Active Directory experts – but we must be able to handle the “audience restrictions” as required. So here is how it’s done in a nutshell. Important note. Not all could be done in PowerShell (at least not yet)! There are no Windows PowerShell commands to configure People Picker. The stsadm command is: stsadm -o setproperty -pn peoplepicker-searchadcustomquery -pv ADQuery –url http://somethingOrOther Note the long-hyphenated property name. Now to filling the ADQuery.   LDAP Query in a nutshell Syntax LDAP is no older than SQL and an LDAP query is actually a query against the LDAP Database. LDAP attributes are the equivalent of Database columns, so why do we have to learn a new query language? Beats me! But we must, so here it is. The syntax of an LDAP query string is made of individual statements with relational operators including: = Equal <= Lower than or equal >= Greater than or equal… and memberOf – a group membership. ! Not * Wildcard Equal and memberOf are the most commonly used. Checking for absence uses the ! – not and the * - wildcard Example: (SN=Grant) All whose last name – SurName – is Grant Example: (!(SN=Grant)) All except Grant Example: (!(SN=*)) all where there is no SurName i.e SurName is absent (probably Rappers). Example: (CN=MyGroup) Common Name is MyGroup.  Example: (GN=J*) all the Given Names that start with J (JJ, Jane, Jon, John, etc.) The cryptic SN, CN, GN, etc. are attributes and more about them later All the queries are enclosed in parentheses (Query). Complex queries are comprised of sets that are in AND or OR conditions. AND is denoted by the ampersand (&) and the OR is denoted by the vertical pipe (|). The general syntax is that of the Prefix polish notation where the operand precedes the variables. E.g +ab is the sum of a and b. In an LDAP query (&(A)(B)) will garner the objects for which both A and B are true. In an LDAP query (&(A)(B)(C)) will garner the objects for which A, B and C are true. There’s no limit to the number of conditions. In an LDAP query (|(A)(B)) will garner the objects for which either A or B are true. In an LDAP query (|(A)(B)(C)) will garner the objects for which at least one of A, B and C is true. There’s no limit to the number of conditions. More complex queries have both types of conditions and the parentheses determine the order of operations. Attributes Now let’s get into the SN, CN, GN, and other attributes of the query SN – is the SurName (last name) GN – is the Given Name (first name) CN – is the Common Name, usually GN followed by SN OU – is an Organization Unit such as division, department etc. DC – is a Domain Content in the AD forest l – lower case ‘L’ stands for location. Jerusalem anybody? Or Katmandu. UPN – User Principal Name, is usually the first part of an email address. By nature it is unique in the forest. Most systems set the UPN to be the first initial followed by the SN of the person involved. Some limit the total to 8 characters. If we have many ‘jsmith’ we have to somehow distinguish them from each other. DN – is the distinguished name – a name unique to AD forest in which it lives. Usually it’s a CN with some domain or group distinguishers. DN is important in conjunction with the memberOf relation. Groups have stricter requirement. Each group has to have a unique name - its CN and it has to be unique regardless of its place. See more below. All of the attributes are case insensitive. CN, cn, Cn, and cN are identical. objectCategory is an element that requires special consideration. AD contains many different object like computers, printers, and of course people and groups. In the queries below, we’re limiting our search to people (person). Putting it altogether Let’s get a list of all the Johns in the SPAdmin group of the Jerusalem that local domain. (&(objectCategory=person)(memberOf=cn=SPAdmin,ou=Jerusalem,dc=local)) The memberOf=cn=SPAdmin uses the cn (Common Name) of the SPAdmin group. This is how the memberOf relation is used. ‘SPAdmin’ is actually the DN of the group. Also the memberOf relation does not allow wild cards (*) in the group name. Also, you are limited to at most one ‘OU’ entry. Let’s add Marvin Minsky to the search above. |(&(objectCategory=person)(memberOf=cn=SPAdmin,ou=Jerusalem,dc=local))(CN=Marvin Minsky) Here I added the or pipeline at the beginning of the query and put the CN requirement for Minsky at the end. Note that if Marvin was already in the prior result, he’s not going to be listed twice. One last note: You may see a dryer but more complete list of attributes rules and examples in: http://www.tek-tips.com/faqs.cfm?fid=5667 And finally (thus negating the claim that my previous note was last), to the best of my knowledge there are 3 more ways to limit the audience. One is to use the peoplepicker-searchadcustomfilter property using the same ADQuery. This works only in SP1 and above. The second is to limit the search to users within this particular site collection – the property name is peoplepicker-onlysearchwithinsitecollection and the value is yes (-pv yes) And the third is –pn peoplepicker-serviceaccountdirectorypaths –pv “OU=ou1,DC=dc1…..” Again you are limited to at most one ‘OU’ phrase – no OU=ou1,OU=ou2… And now the real end. The main property discussed in this sprawling and seemingly endless monogram – peoplepicker-searchadcustomquery - is the most general way of getting the job done. Here are a few examples of command lines that worked and some that didn’t. Can you see why? C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\12\BIN>stsa dm -o setproperty -url http://somethingOrOther -pn peoplepicker-searchadcustomfi lter -pv (Title=David) Operation completed successfully. C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\12\BIN>stsa dm -o setproperty -url http://somethingOrOther -pn peoplepicker-searchadcustomfi lter -pv (!Title=David) Operation completed successfully. C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\12\BIN>stsa dm -o setproperty -url http://somethingOrOther -pn peoplepicker-searchadcustomfi lter -pv (OU=OURealName,OU=OUMid,OU=OUTop,DC=TopDC,DC=MidDC,DC=BottomDC) Command line error. Too many OUs C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\12\BIN>stsa dm -o setproperty -url http://somethingOrOther -pn peoplepicker-searchadcustomfi lter -pv (OU=OURealName) Operation completed successfully. C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\12\BIN>stsa dm -o setproperty -url http://somethingOrOther -pn peoplepicker-searchadcustomfi lter -pv (DC=TopDC,DC=MidDC,DC=BottomDC) Operation completed successfully. C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\12\BIN>stsa dm -o setproperty -url http://somethingOrOther -pn peoplepicker-searchadcustomfi lter -pv (OU=OURealName,DC=TopDC,DC=MidDC,DC=BottomDC) Operation completed successfully.   That’s all folks!

  Read the article

• Visiting the Emtel Data Centre

  Back in February at the first event of the Emtel Knowledge Series (EKS) I spoke to various people at Emtel about their data centre here on the island. I was trying to see whether it would be possible to arrange a meeting over there for a selected group of our community members. Well, let's say it like this... My first approach wasn't that promising and far from successful but during the following months there were more and more occasions to get in touch with the "right" contact persons at Emtel to make it happen... Setting up an appointment and pre-requisites The major improvement came during a Boot Camp for Windows Phone 8.1 App development organised by Microsoft Indian Ocean Islands in cooperation with Emtel at the Emtel World, Ebene. Apart from learning bits and pieces regarding Universal Apps I took the opportunity to get in touch with Arvin Lockee, Sales Executive - Data, during our lunch break. And this really kicked off the whole procedure. Prior to get access to the Emtel data centre it is requested that you provide full name and National ID of anyone going to visit. Also, it should be noted that there was only a limited amount of seats available. Anyways, packed with this information I posted through the usual social media channels. Responses came in very quickly and based on First-come, first-serve (FCFS) principle I noted down the details and forwarded them to Emtel in order to fix a date and time for the visit. In preparation on our side, all attendees exchanged contact details and we organised transport options to go to the data centre in Arsenal. The day before and on the day of our meeting, Arvin send me a reminder to check whether everything is still confirmed and ready to go... Of course, it was! Arriving at the Emtel Data Centre As I'm coming from Flic En Flac towards the North, we agreed that I'm going to pick up a couple of young fellows near the old post office in Port Louis. All went well, except that Sean eventually might be living in another time zone compared to the rest of us. Anyway, after some extended stop we were complete and arrived just in time in Arsenal to meet and greet with Ish and Veer. Again, Emtel is taking access procedures to their data centre very serious and the gate stayed close until all our IDs had been noted and compared to the list of registered attendees. Despite having a good laugh at the mixture of old and new ID cards it was a straight-forward processing. The ward was very helpful and guided us to the waiting area at the entrance section of the building. Shortly after we were welcomed by Kamlesh Bokhoree, the Data Centre Officer. He gave us brief introduction into the rules and regulations during our visit, like no photography allowed, not touching the buttons, and following his instructions through the whole visit. Of course! Inside the data centre Next, he explained us the multi-factor authentication system using a combination of bio-metric data, like finger print reader, and "classic" pin panel. The Emtel data centre provides multiple services and next to co-location for your own hardware they also offer storage options for your backup and archive data in their massive, fire-resistant vault. Very impressive to get to know about the considerations that have been done in choosing the right location and how to set up the whole premises. It should also be noted that there is 24/7 CCTV surveillance inside and outside the buildings. Strengths of the Emtel TIER 3 Data Centre, Mauritius Finally, we were guided into the first server room. And wow, the whole setup is cleverly planned and outlined in the architecture. From the false floor and ceilings in order to provide optimum air flow, over to the separation of cold and hot aisles between the full-size server racks, and of course the monitored air conditions in order to analyse and watch changes in temperature, smoke detection and other parameters. And not surprisingly everything has been implemented in two independent circuits. There is a standardised classification for the construction and operation of data centres world-wide, and the Emtel's one has been designed to be a TIER 4 building but due to the lack of an alternative power supplier on the island it is officially registered as a TIER 3 compliant data centre. Maybe in the long run there might be a second supplier of energy next to CEB... time will tell. Luckily, the data centre is integrated into the National Fibre Optic Gigabit Ring and Emtel already connects internationally through diverse undersea cable routes like SAFE & LION/LION2 out of Mauritius and through several other providers for onwards connectivity. The data centre is part of the National Fibre Optic Gigabit Ring and has redundant internet connectivity onwards. Meanwhile, Arvin managed to join our little group of geeks and he supported Kamlesh in answering our technical questions regarding the capacities and general operation of the data centre. Visiting the NOC and its dedicated team of IT professionals was surely one of the visual highlights. Seeing their wall of screens to monitor any kind of activities on the data lines, the managed servers and the activity in and around the building was great. Even though I'm using a multi-head setup since years I cannot keep it up with that setup... ;-) But I got a couple of ideas on how to improve my work spaces here at the office. Clear advantages of hosting your e-commerce and mobile backends locally After the completely isolated NOC area we continued our Q&A session with Kamlesh and Arvin in the second server room which is dedictated to shared environments. On first thought it should be well-noted that there is lots of space for full-sized racks and therefore co-location of your own hardware. Actually, given the feedback that there will be upcoming changes in prices the facilities at the Emtel data centre are getting more and more competitive and interesting for local companies, especially small and medium enterprises. After seeing this world-class infrastructure available on the island, I'm already considering of moving one of my root servers abroad to be co-located here on the island. This would provide an improved user experience in terms of site performance and latency. This would be a good improvement, especially for upcoming e-commerce solutions for two of my local clients. Later on, we actually started the conversation of additional services that could be a catalyst for the local market in order to attract more small and medium companies to take the data centre into their evaluations regarding online activities. Until today Emtel does not provide virtualised server environments but there might be ongoing plans in the future to cover this field as well. Emtel is a mobile operator and internet connectivity provider in the first place, entering a market of managed and virtualised server infrastructures including capacities in terms of cloud storage and computing are rather new and there is a continuous learning curve at Emtel, too. You cannot just jump into a new market and see how it works out... And I appreciate Emtel's approach towards a solid fundament and then building new services on top of that. Emtel as a future one-stop-shop service provider for all your internet and telecommunications needs. Emtel's promotional video about their TIER 3 data centre in Arsenal, Mauritius More details are thoroughly described in Emtel's brochure of their data centre. Check out their PDF document here. Thanks for this opportunity Visiting and walking through the Emtel data centre for more than 2 hours was a great experience. As representative of the Mauritius Software Craftsmanship Community (MSCC) I would like to thank anyone at Emtel involved in the process of making it happen, and especially to Arvin Lockee and Kamlesh Bokhoree for their time and patience in explaining the infrastructure and answering all the endless questions from our members. Thank You!

  Read the article

• broadcom 5722 NIC not installed on Ubuntu Server, although driver present

  - by Bastien

  Hello, I just installed Ubuntu Server 10.04 LTS, running kernel 2.6.32-24-server, on a brand new Dell T110 server, supposedly fully compatible with Ubuntu Server. I have two NICs: one ONBOARD, the other additional on PCI. both of them are Broadcom netXtreme 5572. on the first boot of the system, I could see both cards as eth0 and eth1 (with ifconfig) I configured eth0 as static IP (as planned), and did not configure eth1. after rebooting, one of the two NICs "disappeared": it does not appear in ifconfig at all. the one that disappeared is the ONBOARD one. I investigated a bit and found the following things: the card is SEEN, but not "installed", it appears as "UNCLAIMED" in lshw: *-network UNCLAIMED description: Ethernet controller product: NetXtreme BCM5722 Gigabit Ethernet PCI Express vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:04:00.0 version: 00 width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress cap_list configuration: latency=0 resources: memory:df9f0000-df9fffff *-network description: Ethernet interface product: NetXtreme BCM5722 Gigabit Ethernet PCI Express vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:05:00.0 logical name: eth0 version: 00 serial: 00:10:18:60:23:64 size: 100MB/s capacity: 1GB/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.102 duplex=full firmware=5722-v3.09 ip=10.129.167.25 latency=0 link=yes multicast=yes port=twisted pair speed=100MB/s resources: irq:35 memory:dfaf0000-dfafffff so I checked my dmesg and found a few strange lines, showing, there actually is a problem bringing up this card: [ 3.737506] tg3: Could not obtain valid ethernet address, aborting. [ 3.737527] tg3 0000:04:00.0: PCI INT A disabled [ 3.737535] tg3: probe of 0000:04:00.0 failed with error -22 [ 3.737553] alloc irq_desc for 17 on node -1 [ 3.737555] alloc kstat_irqs on node -1 [ 3.737560] tg3 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 3.737566] tg3 0000:05:00.0: setting latency timer to 64 [ 3.793529] eth0: Tigon3 [partno(BCM95722A2202G) rev a200] (PCI Express) MAC address 00:10:18:60:23:64 [ 3.793532] eth0: attached PHY is 5722/5756 (10/100/1000Base-T Ethernet) (WireSpeed[1]) [ 3.793534] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 3.793536] eth0: dma_rwctrl[76180000] dma_mask[64-bit] that actually shows that one NIC is recognized, the other is not. I researched a bit more, with lspci -v: 04:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5722 Gigabit Ethernet PCI Express Subsystem: Broadcom Corporation NetXtreme BCM5722 Gigabit Ethernet PCI Express Flags: fast devsel, IRQ 16 Memory at df9f0000 (64-bit, non-prefetchable) [size=64K] Capabilities: [48] Power Management version 3 Capabilities: [50] Vital Product Data <?> Capabilities: [58] Vendor Specific Information <?> Capabilities: [e8] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Capabilities: [d0] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting <?> Capabilities: [13c] Virtual Channel <?> Capabilities: [160] Device Serial Number 00-00-00-fe-ff-00-00-00 Kernel modules: tg3 05:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5722 Gigabit Ethernet PCI Express Subsystem: Broadcom Corporation NetXtreme BCM5722 Gigabit Ethernet PCI Express Flags: bus master, fast devsel, latency 0, IRQ 35 Memory at dfaf0000 (64-bit, non-prefetchable) [size=64K] Expansion ROM at <ignored> [disabled] Capabilities: [48] Power Management version 3 Capabilities: [50] Vital Product Data <?> Capabilities: [58] Vendor Specific Information <?> Capabilities: [e8] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+ Capabilities: [d0] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting <?> Capabilities: [13c] Virtual Channel <?> Capabilities: [160] Device Serial Number 64-23-60-fe-ff-18-10-00 Capabilities: [16c] Power Budgeting <?> Kernel driver in use: tg3 Kernel modules: tg3 here I could see that the MAC address is 00-00-00-FE-FF-00-00-00, which, according to some forum posts on several websites, could be an issue. I've researched everything I could on the net, and found out several people having slightly comparable issues, but they usually involve different HW, and do not provide a proper explanation / solution... I would appreciate if anyone around here has some info to share ! thanks

  Read the article

• Cannot ping host stale ARP cache?

  - by gkchicago

  I am having a strange issue with a Debian (Lenny/Linux 2.6.26-2-amd64) that has been driving me nuts. On some machines within my network I can ping the host in question just fine, other times I have to manually hard-code the ARP ethernet address for the IP in order to establish connectivity. I've finally worked it down to somehow involving ARP. I just found how to fix it in a way that made it work but I'm looking for help explaining this issue and also I don't trust my fix to be permanent.. My thought process has been the following but I just can't make any sense out of it: Could it be the card? (Intel 82555 rev 4) Could it be because there are two network cards? (Default route is eth0) Could it be because of the network aliases? Lenny? AMD x86_64? Argh.. Thank you for any insight you might have // Ping doesn't go thru [gordon@ubuntu ~]$ ping 192.168.135.101 PING 192.168.135.101 (192.168.135.101) 56(84) bytes of data. --- 192.168.135.101 ping statistics --- 4 packets transmitted, 0 received, 100% packet loss, time 3014ms // Here's the ARP Table, sometimes the .151 address is good, sometimes it // also matches the Gateways MAC like .101 is doing right here. [gordon@ubuntu ~]$ cat /proc/net/arp IP address HW type Flags HW address Mask Device 192.168.135.15 0x1 0x2 00:0B:DB:2B:24:89 * eth0 192.168.135.151 0x1 0x2 00:0B:6A:3A:30:A6 * eth0 192.168.135.1 0x1 0x2 00:1A:A2:2D:2A:04 * eth0 192.168.135.101 0x1 0x2 00:1A:A2:2D:2A:04 * eth0 // Drop the bad arp table listing and set it manually based on /sbin/ifconfig [gordon@ubuntu ~]$ sudo arp -d 192.168.135.101 [gordon@ubuntu ~]$ sudo arp -s 192.168.135.101 00:0B:6A:3A:30:A6 // Ping starts going thru..?!? [gordon@ubuntu ~]$ ping 192.168.135.101 PING 192.168.135.101 (192.168.135.101) 56(84) bytes of data. 64 bytes from 192.168.135.101: icmp_seq=1 ttl=64 time=15.8 ms 64 bytes from 192.168.135.101: icmp_seq=2 ttl=64 time=15.9 ms 64 bytes from 192.168.135.101: icmp_seq=3 ttl=64 time=16.0 ms 64 bytes from 192.168.135.101: icmp_seq=4 ttl=64 time=15.9 ms --- 192.168.135.101 ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 3012ms rtt min/avg/max/mdev = 15.836/15.943/16.064/0.121 ms The following is my network config on this. gordon@db01:~$ /sbin/ifconfig eth0 Link encap:Ethernet HWaddr 00:0b:6a:3a:30:a6 inet addr:192.168.135.151 Bcast:192.168.135.255 Mask:255.255.255.0 inet6 addr: fe80::20b:6aff:fe3a:30a6/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:15476725 errors:0 dropped:0 overruns:0 frame:0 TX packets:10030036 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:18565307359 (17.2 GiB) TX bytes:3412098075 (3.1 GiB) eth0:0 Link encap:Ethernet HWaddr 00:0b:6a:3a:30:a6 inet addr:192.168.135.150 Bcast:192.168.135.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 eth0:1 Link encap:Ethernet HWaddr 00:0b:6a:3a:30:a6 inet addr:192.168.135.101 Bcast:192.168.135.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 eth1 Link encap:Ethernet HWaddr 00:e0:81:2a:6e:d0 inet addr:10.10.62.1 Bcast:10.10.62.255 Mask:255.255.255.0 inet6 addr: fe80::2e0:81ff:fe2a:6ed0/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:10233315 errors:0 dropped:0 overruns:0 frame:0 TX packets:19400286 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1112500658 (1.0 GiB) TX bytes:27952809020 (26.0 GiB) Interrupt:24 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:387 errors:0 dropped:0 overruns:0 frame:0 TX packets:387 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:41314 (40.3 KiB) TX bytes:41314 (40.3 KiB) gordon@db01:~$ sudo mii-tool -v eth0 eth0: negotiated 100baseTx-FD, link ok product info: Intel 82555 rev 4 basic mode: autonegotiation enabled basic status: autonegotiation complete, link ok capabilities: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD advertising: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD flow-control link partner: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD gordon@db01:~$ sudo route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface localnet * 255.255.255.0 U 0 0 0 eth0 10.10.62.0 * 255.255.255.0 U 0 0 0 eth1 default 192.168.135.1 0.0.0.0 UG 0 0 0 eth0

  Read the article

• Static background noise while using new headset Ubuntu 13.04

  - by ThundLayr

  Today I bought a new gaming headset (Gx-Gaming Lychas), and when I tried to record some gameplay-comentary I noticed that there always is a static background noise, I just recorded an example so you guys can listen it (no downloaded needed): http://www47.zippyshare.com/v/65167832/file.html I'm using Kubuntu 13.04 and Kernel version is 3.8.0-19, my laptop is an Acer Travelmate 5760Z, I tried tons of configurations on Alsamixer and none of them made result, I really need to get this working so any kind of help will be very aprecciated. cat /proc/asound/cards: 0 [PCH ]: HDA-Intel - HDA Intel PCH HDA Intel PCH at 0xc6400000 irq 44 cat /proc/asound/card0/codec#0 Codec: Conexant CX20588 Address: 0 AFG Function Id: 0x1 (unsol 1) Vendor Id: 0x14f1506c Subsystem Id: 0x10250574 Revision Id: 0x100003 No Modem Function Group found Default PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: N/A Default Amp-Out caps: N/A State of AFG node 0x01: Power states: D0 D1 D2 D3 D3cold CLKSTOP EPSS Power: setting=D0, actual=D0 GPIO: io=4, o=0, i=0, unsolicited=1, wake=0 IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 Node 0x10 [Audio Output] wcaps 0xc1d: Stereo Amp-Out R/L Control: name="Headphone Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Control: name="Headphone Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Device: name="CX20588 Analog", type="Audio", device=0 Amp-Out caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=1 Amp-Out vals: [0x4a 0x4a] Converter: stream=8, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x11 [Audio Output] wcaps 0xc1d: Stereo Amp-Out R/L Control: name="Speaker Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Control: name="Speaker Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=1 Amp-Out vals: [0x80 0x80] Converter: stream=8, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x12 [Audio Output] wcaps 0x611: Stereo Digital Converter: stream=0, channel=0 Digital: Digital category: 0x0 IEC Coding Type: 0x0 PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x5]: PCM AC3 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x13 [Beep Generator Widget] wcaps 0x70000c: Mono Amp-Out Control: name="Beep Playback Volume", index=0, device=0 ControlAmp: chs=1, dir=Out, idx=0, ofs=0 Control: name="Beep Playback Switch", index=0, device=0 ControlAmp: chs=1, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x07, nsteps=0x07, stepsize=0x0f, mute=0 Amp-Out vals: [0x00] Node 0x14 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L Control: name="Capture Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Control: name="Capture Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Device: name="CX20588 Analog", type="Audio", device=0 Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=1 Amp-In vals: [0x50 0x50] [0x80 0x80] [0x80 0x80] [0x80 0x80] Converter: stream=4, channel=0 SDI-Select: 0 PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 4 0x17* 0x18 0x23 0x24 Node 0x15 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=1 Amp-In vals: [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a] Converter: stream=0, channel=0 SDI-Select: 0 PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 4 0x17* 0x18 0x23 0x24 Node 0x16 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=1 Amp-In vals: [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a] Converter: stream=0, channel=0 SDI-Select: 0 PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 4 0x17* 0x18 0x23 0x24 Node 0x17 [Audio Selector] wcaps 0x30050d: Stereo Amp-Out Control: name="Mic Boost Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0 Amp-Out vals: [0x04 0x04] Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 4 0x1a 0x1b* 0x1d 0x1e Node 0x18 [Audio Selector] wcaps 0x30050d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0 Amp-Out vals: [0x00 0x00] Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 4 0x1a* 0x1b 0x1d 0x1e Node 0x19 [Pin Complex] wcaps 0x400581: Stereo Control: name="Headphone Jack", index=0, device=0 Pincap 0x0000001c: OUT HP Detect Pin Default 0x04214040: [Jack] HP Out at Ext Right Conn = 1/8, Color = Green DefAssociation = 0x4, Sequence = 0x0 Pin-ctls: 0xc0: OUT HP Unsolicited: tag=01, enabled=1 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 2 0x10* 0x11 Node 0x1a [Pin Complex] wcaps 0x400481: Stereo Control: name="Internal Mic Phantom Jack", index=0, device=0 Pincap 0x00001324: IN Detect Vref caps: HIZ 50 80 Pin Default 0x90a70130: [Fixed] Mic at Int N/A Conn = Analog, Color = Unknown DefAssociation = 0x3, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x24: IN VREF_80 Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x1b [Pin Complex] wcaps 0x400581: Stereo Control: name="Mic Jack", index=0, device=0 Pincap 0x00011334: IN OUT EAPD Detect Vref caps: HIZ 50 80 EAPD 0x0: Pin Default 0x04a19020: [Jack] Mic at Ext Right Conn = 1/8, Color = Pink DefAssociation = 0x2, Sequence = 0x0 Pin-ctls: 0x24: IN VREF_80 Unsolicited: tag=02, enabled=1 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 2 0x10* 0x11 Node 0x1c [Pin Complex] wcaps 0x400581: Stereo Pincap 0x00000014: OUT Detect Pin Default 0x40f001f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 2 0x10* 0x11 Node 0x1d [Pin Complex] wcaps 0x400581: Stereo Pincap 0x00010034: IN OUT EAPD Detect EAPD 0x0: Pin Default 0x40f001f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 2 0x10* 0x11 Node 0x1e [Pin Complex] wcaps 0x400481: Stereo Pincap 0x00000024: IN Detect Pin Default 0x40f001f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x1f [Pin Complex] wcaps 0x400501: Stereo Control: name="Speaker Phantom Jack", index=0, device=0 Pincap 0x00000010: OUT Pin Default 0x92170110: [Fixed] Speaker at Int Front Conn = Analog, Color = Unknown DefAssociation = 0x1, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 2 0x10 0x11* Node 0x20 [Pin Complex] wcaps 0x400781: Stereo Digital Pincap 0x00000010: OUT Pin Default 0x40f001f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 1 0x12 Node 0x21 [Audio Output] wcaps 0x611: Stereo Digital Converter: stream=0, channel=0 Digital: Digital category: 0x0 IEC Coding Type: 0x0 PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x5]: PCM AC3 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x22 [Pin Complex] wcaps 0x400781: Stereo Digital Pincap 0x00000010: OUT Pin Default 0x40f001f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 1 0x21 Node 0x23 [Pin Complex] wcaps 0x40040b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x04, stepsize=0x2f, mute=0 Amp-In vals: [0x00 0x00] Pincap 0x00000020: IN Pin Default 0x40f001f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x24 [Audio Mixer] wcaps 0x20050b: Stereo Amp-In Amp-In caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00] Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 2 0x10 0x11 Node 0x25 [Vendor Defined Widget] wcaps 0xf00000: Mono

  Read the article

• How to diagnose computer lockup/freezing problem

  - by Scott Mitchell

  I built a desktop computer a couple years back with the following specs: CPU: Intel Core 2 Quad Q9300 Yorkfield 2.5GHz 6MB L2 Cache LGA 775 95W Quad-Core Processor BX80580Q9300 Motherboard: EVGA 122-CK-NF68-T1 LGA 775 NVIDIA nForce 680i SLI ATX Intel Motherboard Video Card: Two EVGA 256-P2-N758-TR GeForce 8600GT SCC 256MB 128-bit GDDR3 PCI Express x16 SLI Supported Video Card PSU: SeaSonic S12 Energy Plus SS-550HT 550W ATX12V V2.3 / EPS12V V2.91 SLI Certified CrossFire Ready 80 PLUS Certified Active PFC Power Supply Memory: Two G.SKILL 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory Model F2-6400CL5D-4GBPQ Since its inception, the machine has periodically locked up, the regularlity having varied over the years from once a day to once a month. Typically, lockups happen once every few days. By "lockup" I mean my computer just freezes. The screen locks up, I can't move the mouse. Hitting keys on my keyboard that normally turn LEDs on or off on the keyboard (such as Caps Lock) no longer turn the LEDs on or off. If there was music playing at the time of the lockup, noise keeps coming out of the speakers, but it's just the current frequency/note that plays indefinitely. There is no BSOD. When such a lockup occurs I have to do a hard reboot by either turning off the computer or hitting the reset button. I have the most recent version of the NVIDIA hardware drivers, and update them semi-regularly, but that hasn't seemed to help. I am currently using Windows 7 x64, but was previously using Windows Server 2003 x64 and having the same lockup issues. My guess is that it's somehow video driver or motherboard related, but I don't know how to go about diagnosing this problem to narrow down which of the two is the culprit. Additional information re: cooling Regarding cooling... I've not installed any after-market cooling systems aside from two regular fans I scavenged from an older computer. The fan atop the CPU is the one that shipped with it. One of the two scavenged fans I added it located at the bottom tower of the corner, in an attempt to create some airflow from front to back. The second fan is pointed directly at the two video cards. SpeedFan installation and readings Per studiohack's suggestion, I installed SpeedFan, which provided the following temperature readings: GPU: 63C GPU: 65C System: 76C CPU: 64C AUX: 36C Core 0: 78C Core 1: 76C Core 2: 79C Core 3: 79C Update #3: Another Lockup :-( Well, I had another lockup last night. :-( SpeedFan reported the CPU temp at 38 C when it happened, and there was no spike in temperature leading up to the freeze. One thing I notice is that the freeze seems more likely to happen if I am watching a video. In fact, of the last 5 freezes over the past month, 4 of them have been while watching a video on Flickr. Not necessarily the same video, but a video nevertheless. I don't know if this is just coincidence or if it means anything. (As an aside, each night before bedtime my 2 year old daughter sits on my lap and watches some home videos on Flickr and, in the last month, has learned the phrase, "Uh oh, computer broke.") Update #4: MemTest86 and 3DMark06 Test Results: Per suggestions in the comments, I ran the MemTest86 overnight and it cycled through the 8 GB of memory 5 times without error. I also ran the 3DMark06 test without a problem (see my scores at http://3dmark.com/3dm06/15163549). So... what now? :-) Any further suggestions on what to check? Is there some way to get a stack trace or something when the computer locks like that? Thanks

  Read the article

• How to Use the Signature Editor in Outlook 2013

  - by Lori Kaufman

  The Signature Editor in Outlook 2013 allows you to create a custom signature from text, graphics, or business cards. We will show you how to use the various features of the Signature Editor to customize your signatures. To open the Signature Editor, click the File tab and select Options on the left side of the Account Information screen. Then, click Mail on the left side of the Options dialog box and click the Signatures button. For more details, refer to one of the articles mentioned above. Changing the font for your signature is pretty self-explanatory. Select the text for which you want to change the font and select the desired font from the drop-down list. You can also set the justification (left, center, right) for each line of text separately. The drop-down list that reads Automatic by default allows you to change the color of the selected text. Click OK to accept your changes and close the Signatures and Stationery dialog box. To see your signature in an email, click Mail on the Navigation Bar. Click New Email on the Home tab. The Message window displays and your default signature is inserted into the body of the email. NOTE: You shouldn’t use fonts that are not common in your signatures. In order for the recipient to see your signature as you intended, the font you choose also needs to be installed on the recipient’s computer. If the font is not installed, the recipient would see a different font, the wrong characters, or even placeholder characters, which are empty square boxes. Close the Message window using the File tab or the X button in the upper, right corner of the Message window. You can save it as a draft if you want, but it’s not necessary. If you decide to use a font that is not common, a better way to do so would be to create a signature as an image, or logo. Create your image or logo in an image editing program making it the exact size you want to use in your signature. Save the image in a file size as small as possible. The .jpg format works well for pictures, the .png format works well for detailed graphics, and the .gif format works well for simple graphics. The .gif format generally produces the smallest files. To insert an image in your signature, open the Signatures and Stationery dialog box again. Either delete the text currently in the editor, if any, or create a new signature. Then, click the image button on the editor’s toolbar. On the Insert Picture dialog box, navigate to the location of your image, select the file, and click Insert. If you want to insert an image from the web, you must enter the full URL for the image in the File name edit box (instead of the local image filename). For example, http://www.somedomain.com/images/signaturepic.gif. If you want to link to the image at the specified URL, you must also select Link to File from the Insert drop-down list to maintain the URL reference. The image is inserted into the Edit signature box. Click OK to accept your changes and close the Signatures and Stationery dialog box. Create a new email message again. You’ll notice the image you inserted into the signature displays in the body of the message. Close the Message window using the File tab or the X button in the upper, right corner of the Message window. You may want to put a link to a webpage or an email link in your signature. To do this, open the Signatures and Stationery dialog box again. Enter the text to display for the link, highlight the text, and click the Hyperlink button on the editor’s toolbar. On the Insert Hyperlink dialog box, select the type of link from the list on the left and enter the webpage, email, or other type of address in the Address edit box. You can change the text that will display in the signature for the link in the Text to display edit box. Click OK to accept your changes and close the dialog box. The link displays in the editor with the default blue, underlined text. Click OK to accept your changes and close the Signatures and Stationery dialog box. Here’s an example of an email message with a link in the signature. Close the Message window using the File tab or the X button in the upper, right corner of the Message window. You can also insert your contact information into your signature as a Business Card. To do so, click Business Card on the editor’s toolbar. On the Insert Business Card dialog box, select the contact you want to insert as a Business Card. Select a size for the Business Card image from the Size drop-down list. Click OK. The Business Card image displays in the Signature Editor. Click OK to accept your changes and close the Signatures and Stationery dialog box. When you insert a Business Card into your signature, the Business Card image displays in the body of the email message and a .vcf file containing your contact information is attached to the email. This .vcf file can be imported into programs like Outlook that support this format. Close the Message window using the File tab or the X button in the upper, right corner of the Message window. You can also insert your Business Card into your signature without the image or without the .vcf file attached. If you want to provide recipients your contact info in a .vcf file, but don’t want to attach it to every email, you can upload the .vcf file to a location on the internet and add a link to the file, such as “Get my vCard,” in your signature. NOTE: If you want to edit your business card, such as applying a different template to it, you must select a different View other than People for your Contacts folder so you can open the full contact editing window.     

  Read the article

• Dual head setup for Ubuntu 10.04.1 and Windows XP Pro with same hardware configuration

  - by mejpark

  I have a Dell OptiPlex 360 workstation at work, with 2 x ATI RV280 [Radeon 9200 PRO] graphics cards installed, which are attached to two identical 19" HII flat panel monitors. I'm using the open source Radeon driver with Ubuntu, and the proprietary drivers with Windows. The good news is that dual head configuration works for both OSes. The bad news is, I have to use a different hardware configuration for each OS to achieve this. Hardware config #1: Dual monitors work for Windows XP Pro like this: First display -> external VGA port Second display -> DVI input on gfx card Hardware config #2: Dual monitors work for Ubuntu 10.04.1 like this: First display -> VGA port on gfx card Second display -> DVI input on gfx card I connected up the displays according to Config #2 and booted up Windows, which resulted in a mirror image on both screens. I was unable to login, as the login box was not visible. I unplugged the VGA lead from gfx card and plugged it into the external VGA port (Config #1) - Windows dual head works again, but the VGA-connected screen is not recognised by Ubuntu and remains in standby mode. Is it possible to configure a dual head setup for Ubuntu using Config #1, or am I missing something? I tried setting up dual monitors using Config #1, this morning which didn't work. By default, there is no xorg.conf file in Ubuntu 10.04.1, so I generated one using: $ sudo X :2 -configure X.Org X Server 1.7.6 Release Date: 2010-03-17 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.24-27-server i686 Ubuntu Current Operating System: Linux harrier 2.6.32-24-generic #42-Ubuntu SMP Fri Aug 20 14:24:04 UTC 2010 i686 Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-24-generic root=UUID=a34c1931-98d4-4a34-880c-c227a2936c4a ro quiet splash Build Date: 21 July 2010 12:47:34PM xorg-server 2:1.7.6-2ubuntu7.3 (For technical support please see http://www.ubuntu.com/support) Current version of pixman: 0.16.4 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.2.log", Time: Mon Sep 13 10:02:02 2010 List of video drivers: apm ark intel mach64 s3virge trident mga tseng ati nouveau neomagic i740 openchrome voodoo s3 i128 radeon siliconmotion nv ztv vmware v4l chips rendition savage sisusb tdfx geode sis r128 cirrus fbdev vesa (++) Using config file: "/home/michael/xorg.conf.new" (==) Using config directory: "/usr/lib/X11/xorg.conf.d" (II) [KMS] No DRICreatePCIBusID symbol, no kernel modesetting. Xorg detected your mouse at device /dev/input/mice. Please check your config if the mouse is still not operational, as by default Xorg tries to autodetect the protocol. Xorg has configured a multihead system, please check your config. Your xorg.conf file is /home/michael/xorg.conf.new To test the server, run 'X -config /home/michael/xorg.conf.new' ddxSigGiveUp: Closing log $ sudo X -config /home/michael/xorg.conf.new Fatal server error: Server is already active for display 0 If this server is no longer running, remove /tmp/.X0-lock and start again. Please consult the The X.Org Foundation support at http://wiki.x.org for help. ddxSigGiveUp: Closing log I then booted Ubuntu in failsafe mode, dropped into root shell, and executed $ X -config /home/michael/xorg.conf.new again. The screen went blank and turned off, so

  Read the article

< Previous Page | 54 55 56 57 58 59 60 61  | Next Page >