Search Results

Search found 2041 results on 82 pages for 'deleting'.

Page 58/82 | < Previous Page | 54 55 56 57 58 59 60 61 62 63 64 65  | Next Page >

  • Nautilus ignores / misinterprets view size

    - by BlueZero4
    I noticed that a lot of my folders had suddenly switched to higher view sizes than I had specificied. I was assuming that somehow nautilus had suddenly decided to create per-folder entries for said folders with incorrect view sizes. So I found this question: How to reset all per-folder view settings in nautilus? I found the folder specified in the answer (~/.local/share/gvfs-metadata) and found that it was actually important to delete the files INSIDE the folder, because for some reason deleting the folder itself didn't work for some reason. After doing that, I discovered that the odd setting was for the default view settings, not for a handful of files. Nautilus actually handles the per-folder settings like it should, but it ignores the global folder settings. I want Nautilus to, by default, display all non-specified folders as compact view, 50%. My folders are using the compact setting like I want, but they are not down to 50%. At a guess, they are at 100%. Altering the view size of the icon view can set the compact view to 33%, but I'm not sure by what mechanism this functions. I haven't extensively tested the other view sizes because I don't plan on using them much at all. Next I looked up questions like How do I reset nautilus to the default configuration? I'm expecting the problem to be a corrupted config file or something of the sort, so I hunted down directories like ~/.nautilus, ~/.gconf/apps/nautilus, and ~/.gnome2/nautilus. (I don't have a ~/.nautilus directory, so I'm assuming that's only for older versions.) I attempted to remove the contents of each, but I can't seem to force Nautilus back to default configuration settings. Actually viewing Nautilus's preferences in GConf made the settings look like they were what I wanted them to be, which is odd. I'd like to force Nautilus to default settings, basically. Though if something else will fix it, I'll take it too. I'm not interested in doing a full uninstall, reinstall of Nautilus if I don't have to. ==EDIT1== Turns out that Nautilus just writes the settings in GConf for the heck of it. Nautilus only really uses the settings that it stores in DConf. I did gsettings reset-recursively org.gnome.nautilus, which actually did reset Nautilus to default, but it still doesn't like my view size settings.

    Read the article

  • Creating a Yes/No MessageBox in a NuGet install/uninstall script

    - by ParadigmShift
    Sometimes getting a little feedback during the install/uninstall process of a NuGet package could be really useful. Instead of accounting for all possible ways to install your NuGet package for every user, you can simplify the installation by clarifying with the user what they want. This example shows how to generate a windows yes/no message box to get input from the user in the PowerShell install or uninstall script. We’ll use the prompt on the uninstall to confirm if the user wants to delete a custom setting that the initial install placed in their configuration.  Obviously you could use the prompt in any way you want. The objects of the message box are generated similar to the controls in the code behind of a WinForm. At the beginning of your script enter this: param($installPath, $toolsPath, $package, $project)   # Set up path variables $solutionDir = Get-SolutionDir $projectName = (Get-Project).ProjectName $projectPath = Join-Path $solutionDir $projectName   ################################################################################################ # WinForm generation for prompt ################################################################################################ function Ask-Delete-Custom-Settings { [void][reflection.assembly]::loadwithpartialname("System.Windows.Forms") [Void][reflection.assembly]::loadwithpartialname("System.Drawing")   $title = "Package Uninstall" $message = "Delete the customized settings?" #Create form and controls $form1 = New-Object System.Windows.Forms.Form $label1 = New-Object System.Windows.Forms.Label $btnYes = New-Object System.Windows.Forms.Button $btnNo = New-Object System.Windows.Forms.Button   #Set properties of controls and form ############ # label1 # ############ $label1.Location = New-Object System.Drawing.Point(12,9) $label1.Name = "label1" $label1.Size = New-Object System.Drawing.Size(254,17) $label1.TabIndex = 0 $label1.Text = $message   ############# # btnYes # ############# $btnYes.Location = New-Object System.Drawing.Point(156,45) $btnYes.Name = "btnYes" $btnYes.Size = New-Object System.Drawing.Size(48,25) $btnYes.TabIndex = 1 $btnYes.Text = "Yes"   ########### # btnNo # ########### $btnNo.Location = New-Object System.Drawing.Point(210,45) $btnNo.Name = "btnNo" $btnNo.Size = New-Object System.Drawing.Size(48,25) $btnNo.TabIndex = 2 $btnNo.Text = "No"   ########### # form1 # ########### $form1.ClientSize = New-Object System.Drawing.Size(281,86) $form1.Controls.Add($label1) $form1.Controls.Add($btnYes) $form1.Controls.Add($btnNo) $form1.Name = "Form1" $form1.Text = $title #Event Handler $btnYes.add_Click({btnYes_Click}) $btnNo.add_Click({btnNo_Click}) return $form1.ShowDialog() } function btnYes_Click { #6 = Yes $form1.DialogResult = 6 } function btnNo_Click { #7 = No $form1.DialogResult = 7 } ################################################################################################ This has also wired up the click events to the form.  This is all it takes to create the message box. Now we have to actually use the message box and get the user’s response or this is all pointless.  We’ll then delete the section of the application/web configuration called <Custom.Settings> [xml] $configXmlContent = Get-Content $configFile   Write-Host "Please respond to the question in the Dialog Box." $dialogResult = Ask-Delete-Custom-Settings #6 = Yes #7 = No Write-Host "dialogResult = $dialogResult" if ($dialogResult.ToString() -eq "Yes") { Write-Host "Deleting customized settings" $customSettingsNode = $configXmlContent.configuration.Item("Custom.Settings") $configXmlContent.configuration.RemoveChild($customSettingsNode) $configXmlContent.Save($configFile) } if ($dialogResult.ToString() -eq "No") { Write-Host "Do not delete customized settings" } The part where I check if ($dialog.Result.ToString() –eq “Yes”) could just as easily check the value for either 6 or 7 (Yes or No).  I just personally decided I liked this way better.   Shahzad Qureshi is a Software Engineer and Consultant in Salt Lake City, Utah, USA His certifications include: Microsoft Certified System Engineer 3CX Certified Partner Global Information Assurance Certification – Secure Software Programmer – .NET He is the owner of Utah VoIP Store at http://www.utahvoipstore.com/ and SWS Development at http://www.swsdev.com/ and publishes windows apps under the name Blue Voice.

    Read the article

  • How best to look up objects by label?

    - by dsollen
    I am writing the server backed by a pre-written API. I'm going to get a number of strings representing ports, signals, paths, etc etc etc. I need to look up the object associated with a given label, these objects are all in memory (no sql magic to do this for me). My question is, how best do I associate a given unique label with the mutable object it represents? I have enough objects that looking through every signal or every port to find the one that matches is possible, but may be slightly too slow. To be honest the direct 'look at every object' method is probably good enough for so small a body of objects and anything else is premature optimization, but I still am curious what the proper solution would be if I thought my signals were going to grow a bit larger. As I see it there are two options available. First would be to to create a 'store' that is a simple map between object and label. I could have it so that every time I call addObject the object is automatically saved into a hashmap or the like. This works, but relies on my properly adding and deleting each object so the map doesn't grow indefinitely. The biggest issue to me is that this involves having some hidden static map in my ModelObject class that just feels...wrong somehow. The other option is to have some method that can interpret the labels. All of these labels are derived from the underlying objects. So I can look at the signal label, for instance, and say "these 20 characters are the port" to figure out what port I need. This would allow me to quickly figure out what I need. However, if the label method is changed the translateLabelToObject method needs to be updated as well or everything breaks. Which solution is cleaner, or possibly a cleaner solution than either of above? For the record I'm working with sufficient number of variables to make direct comparison a little slow, but not enough to be concerned about memory overhead, written in java. All objects that have labels I need to look up extend the same parent class.

    Read the article

  • Deleted Myself from Admin Group - Now Getting Error usermod: cannot lock /etc/passwd; try again later

    - by BubbaJ
    I have a laptop with Ubuntu 11.10 that is shared between myself and two other family members. My user id was setup as the only "Administrator" on the laptop. The other users were setup as "Standard" users. In my attempt to try to add myself to the user groups for the other users, I somehow deleted myself from the admin groups. I used the "usermod" command from the terminal. I must have neglected to include the proper switches or syntax for the update. It looks like I successfully added my userid to the group associated with my wife's account. When I use the "groups" command, I can see only my id and my wife's id in the list. I no longer see the "admin" or "adm" groups, and others that used to be listed. When I go into System Settings User Accounts it looks like my ID is now listed as a "Standard" user. I would like to change my account back to "Administrator", but now I can't. I did some searches for solutions and found that I would need to boot into Recovery Mode and execute the usermod command from the root session. I was able to successfully boot into Recovery Mode and get to the root session. I was trying to execute the command "usermod -a -G admin user1" to add my id (user1) back to the admin group. When I execute the command from the root session, I get the error message "usermod: cannot lock /etc/passwd; try again later". I tried preceding the usermod command with "sudo", but it didn't make a difference, same error. I then tried adding a new user using adduser, thinking I would try to create a new userid and make the new userid part of the admin group. I get the same error using the adduser command. I saw some posts that recommend looking for and deleting files that end in ".lock" in the etc directory. The only file I found was .pwd.lock which I haven't touched. I am at a loss as to what to try next. I am relatively inexperienced with Ubuntu and Linux, so alot of this is new to me. Any help you can provide would be much appreciated.

    Read the article

  • "file not found" error while commiting

    - by AntonAL
    I have a working copy, checked out from SVN repository. When i'm trying to commit, i get following error: svn: File not found: revision 57, path '/trunk/path/to/my/file/logo-mini.jpg' I've found this file in the repo and noticed, that it has only one revision - 58. I don't understand, why SVN complains about this file, when it is presented and why it points to revision 57 instead of 58 ? I've also renamed the grand-grand-grand-parent folder of this file. Possible, this is an issue ... Update Detailed error description, that i've got from Cornerstone app (Mac OS X): Description : Could not find the specified file. Suggestion : Check that the path you have specified is correct. Technical Information ===================== Error : V4FileNotFoundError Exception : ZSVNNoSuchEntryException Causal Information ================== Description : Commit failed (details follow): Status : 160013 File : subversion/libsvn_client/commit.c, 867 Description : File not found: revision 57, path '/trunk/assets/themes/base/article-content/images/logo-mini.jpg' Status : 160013 File : subversion/libsvn_fs_fs/tree.c, 663 So, i've renamed "/trunk/assets/themes directory" to "/trunk/assets/skins", while improving project structure. I've tried following: updating /trunk/assets/themes directory cleaning deleting from filesytem and checking out again reverting entire /trunk/assets/themes directory to the HEAD revision. Even this does't helps. Still getting the same error. I've got no results.

    Read the article

  • Diagnosing permission problems with Cobian Backup to network share

    - by DaveBurns
    I'm running the latest Cobian 11. I have a Synology DS412 NAS. All of my machines (Mac and Windows) access this just fine when I'm logged in and I browse to it manually. I have Cobian installed as a service on two Windows machines: WinXP SP3 and Win7 x64. On both machines, the service is set to log on with my user account which is in the Windows administrator group. Backups on both machines fail with the message "Couldn't create the destination directory "\nas1\backups\foo\bar\": The filename, directory name, or volume label syntax is incorrect". I have tried setting the NAS's share to allow anonymous read/write access but it made no difference. Although I want the backups to run unattended in the middle of the night, I have tested them by running them manually while I'm logged in but no luck. Before starting that, I make sure that I can browse to the NAS with Explorer to ensure that any authentication session with Windows and the NAS has not expired. Still no luck. I have tried creating that destination directory both on the NAS before the backup and deleting it so the backup job could create it with the client's credentials but no luck. The usual answer in the Cobian support forums is that there is a permission problem. I agree. But at this point, what can I do to diagnose this further?

    Read the article

  • Temp file folder full, but clearing it out doesn't seem to work

    - by Vegar Westerlund
    I got this error on our build server: MSB6003: The specified task executable could not be run. MSB5003: Failed to create a temporary file. Temporary files folder is full or its path is incorrect. The directory name is invalid. [C:\Users\swdev_build\bamboo-agent-home\xml-data\build-dir\XXXX-ZZZZZZ-JOB1\build.xml] This was when trying to run and msbuild task to run our test suite. Using the power of google it seemed that this should be a problem with the %TEMP% folder running out of tmp file names apparently because a 4 digit hex name is used (for a total of 65535 temporary files). The problem is that the error persist, even after going into the %TEMP% folder and deleting everything before rebooting the machine. Does anyone know how to fix the issue and more importantly how to prevent it from happening again? What is the preferred way of cleaning up this temp files? Make it a part of the build process? Update: Actually I cleared the TEMP folder of the only local user, but since the build server is running as the SYSTEM user, it probably has some temp folder somewhere else.

    Read the article

  • System State Backups using NTbackup fail with error 0x800423f4 (relating to volume shadow copy)

    - by Paul Zimmerman
    We have a Windows Server 2003 R2 running Service Pack 2. It is a domain controller (Global Catalog) and our main internal DNS server. We run a System State backup of the machine to back up Active Directory information and save the backup to a different server. This server has a single drive (C:), and we do have Shadow Copies enabled for the volume (which are completing successfully). The System State Backup is now failing with the following listed in the backup logs: Volume shadow copy creation: Attempt 1. "Event Log Writer" has reported an error 0x800423f4. This is part of System State. The backup cannot continue. Error returned while creating the volume shadow copy:800423f4 Aborting Backup. The operation did not successfully complete. When doing a vssadmin list writers, we sometimes get the following reported for the Event Log Writer (other times it says that it is in the state of "[1] Stable" with "No error"): Writer name: 'Event Log Writer' Writer Id: {eee8c692-67ed-4250-8d86-390603070d00} Writer Instance Id: {c7194e96-868a-49e5-ba99-89b61977753c} State: [8] Failed Last error: Retryable error We have tried disabling the event log service via the registry, rebooting, deleting the event log files from the drive, then re-enabling the service via the registry and rebooting, but this didn't seem to solve the issue. We also get an error message when in the event viewer when trying to open the log for the "File Replication Service" of "Unable to complete the operation on 'File Replication Service'. The security descriptor structure is invalid." I have searched the error via Google and tried a number of different things, but nothing has seemed to help. Any suggestions on what we might try to get the Event Log Writer to behave would be greatly appreciated!

    Read the article

  • Firebird 2.1: gfix -online returns "database shutdown"

    - by darvids0n
    Hey all. Googling this one hasn't made a bit of difference, unfortunately, as most results specify the syntax for onlining a database after using gfix -shut -force 30 (or any other number of seconds) as gfix -online dbname, and I have run gfix -online dbname with and without login credentials for the DB in question. The message that I get is: database dbname shutdown Which is fine, except that I want to bring it online now. It's out of the question to close fbserver.exe (running on a Windows box, afaik it's Classic Server 2.1.1 but it may be Super) since we have other databases running off of that which need almost 24/7 uptime. The message from doing another gfix -shut -force or -attach or -tran is invalid shutdown mode for dbname which appears to match with the documentation of what happens if the database is already fully shut down. Ideas and input greatly appreciated, especially since at the moment time is a factor for me. Thanks! EDIT: The whole reason I shut down the DB is to clear out "active" transactions which were linked to a specific IP address, and that computer is my dev terminal (actually a virtual machine where I develop frontends for the database software) but I had no processes connecting to the database at the time. They looked like orphaned transactions to me, and they weren't in limbo afaik. Running a manual sweep didn't clear them out, deleting the rows from MON$STATEMENTS didn't work even though Firebird 2.1 supposedly supports cancelling queries that way. My last resort was to "restart" the database, hence the above issue.

    Read the article

  • Backup Gmail using Mail.app and IMAP without redundancy

    - by Cawas
    I don't care for actually using mail app, I use mostly the gmail interface and mail app just for offline, for quickly reading and eventually replying. Everything is working fine, I think I've followed every guide out there... Here's a great one. But I could find nothing about avoiding redundancy. Well, I can manually do that either by using POP or by checking off most of my labels out of IMAP. But I do use a lot of labels and I often label messages with more than 1 label. And I want them on mail app. Is there anyway to make it keep just 1 copy of repeated messages? Maybe there's a message id or checksum that could be used... If there isn't a way to do it, be assured I still prefer having the extra messages and "wasting" space rather than not having any. edit: I've came across many solutions for finding duplicate files, but they just delete the files. That just make things worst: Mail will just sync it all again. I've realized it's probably better to keep two accounts setup, POP for backup and IMAP for everything else with removing the "All Mail" from it. That's because if the "All Mail" on the server is deleted for any reason, my "All Mail" local will also get deleted, while POP will keep all files regardless of the server. This doesn't solve the redundancy issue at all, but it doesn't create any new issue as well, and I can even use the search properly, without duplicated results, if I search just on the POP. So it helps optimizing a little bit. But I still think the best way to solve this issue would be having something such as aamann's Mail Scripts tweaked to hardlinking the duplicates rather than deleting, and optimized to not need to scan everything every time. I'm trying to contact him and see what we can do. At any pace, I'm still looking for an answer!

    Read the article

  • How to get rid of auto-generated sequence number in network's device name in Windows?

    - by Piotr Dobrogost
    Every time one plugs in the same usb wireless adapter in a new usb port, Windows creates new network device with auto-generated sequence number which looks like this Wireless-N USB Network Adapter #2, Wireless-N USB Network Adapter #3, ... The name of a device is being displayed as part of network's information in Control Panel|Network Connections. How can I get rid of this sequence number? I found out device name which is displayed in network's information is kept in the FriendlyName REG_SZ value under HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Enum\USB\VID_[device specific string]\[usb port specific string] However when I try to modify this value I get error Cannot edit FriendlyName: Error writing the value's new contents. I tried to delete extra keys under HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Enum\USB\VID_13B1&PID_0029 but got Cannot delete KEY NAME: Error while deleting key. error. Trying to solve this problem I followed this answer but trying to change owner with Replace owner on subcontainers and objects option checked I got this error - Registry Editor could not set owner on the currently selected, or some of its subkeys. To find out which subkey is the source of problem I tried changing owner of each subkey. After successfully changing owner of Properites subkey I saw it has subkeys which were previously hidden. Now trying to change owner of these subkeys looks like this: Any idea how to delete these keys?

    Read the article

  • AWStats consumes too much resource, how to disable temporarily

    - by trante
    For some days AWStats takes %10-%20 of my CPU, takes 400-550 MB RAM and works for hours. Maybe my site's traffic became larger so process time takes more time than before or some bugs in program makes this. Anyway I want to disable AWStats temporarily. Maybe I would want to activate it in future. I found that answer. But it gives commands to remove AWStats. I only want to disable it temporarily. My system is Centos 6.3, Plesk 11.5.30 Update #19. I tried to disable cron jobs. I run this # killall awstats.pl I opened # vi /etc/cron.daily/awstats file and I changed it to this: #!/bin/sh #/usr/share/awstats/awstats_updateall.pl now -awstatsprog=/var/www/cgi-bin/awstats/awstats.pl -configdir=/etc/awstats >/dev/null 2>&1 exit 0 After some time I still see that awstats is running. What should I do more to not to awstats run again ? But without removing my files. After changing " /etc/cron.daily/awstats" file awstats doesn't start in daytime. But every night in 03:15 awstats starts again. Because of Plesk auto updates are working at that time, I changed from Plesk. Don't auto update automatically. But it seems like last night at 03:15 awstats started again. Is there any way to stop awstats temporarily except this solution ? Because this solution deletes awstats configs permanently and I don't know how to revert it back in future ? Turn off all AWStats for Plesk 11+ domains #!/bin/bash for i in /var/www/vhosts/*; do echo "Turning off and deleting Stats for" echo `basename $i` /usr/local/psa/admin/bin/webstatmng --unset-configs --stat-prog=awstats --domain-name=`basename $i` /usr/local/psa/admin/bin/webstatmng --clean --stat-prog=awstats --domain-name=`basename $i` done

    Read the article

  • How to fix Firefox Blue Screen of Death?

    - by WilliamKF
    I am running Windows XP SP3 and Firefox v3.6.2 and have an issue with Firefox causing the Blue Screen of Death. If I run in Windows safe mode, it does not occur, but running normally, it seems my firefox profile is going bad and results in certain web pages causing the BSOD. For example, presently, if I visit ebay.com, it gets BSOD. Before it was happening on google.com, but IT removed my Firefox profile and that seemed to fix the Google failure. However, now it has started occurring on ebay. I turned off all extensions and it still occurs. I'd like to fix my system so this does not occur. The IT folks don't seem to be able to solve this, so I am trying to fix it on my own. The BSOD is about something like (from memory) IRQL_NOT_LESS_THAN_OR_EQUAL. Why would safe mode avoid the issue and what does that tell us about the probable cause? I don't want to have to keep deleting my profile, so I'd like to find out the cause of the corruption.

    Read the article

  • SQL Server 2008 Logshipping not Restoring

    - by Nai
    I am getting the following errors during the restore part of the Logshipping process on my secondary server: 2010-04-01 10:00:01.85 Error: The file 'F:\UK_20100327090001.trn' is too recent to apply to the secondary database 'UK_Backup'.(Microsoft.SqlServer.Management.LogShipping) 2010-04-01 10:00:01.85 Error: The log in this backup set begins at LSN 55408000007387500001, which is too recent to apply to the database. An earlier log backup that includes LSN 55147000001788900001 can be restored. RESTORE LOG is terminating abnormally.(.Net SqlClient Data Provider) 2010-04-01 10:00:01.87 Searching for an older log backup file. Secondary Database: 'UK_Backup' 2010-04-01 10:00:01.90 Skipped log backup file. Secondary DB: 'UK_Backup', File: 'F:\UK_20100324090000.trn' 2010-04-01 10:00:01.93 Error: Could not find a log backup file that could be applied to secondary database 'UK_Backup'.(Microsoft.SqlServer.Management.LogShipping) 2010-04-01 10:00:01.93 Deleting old log backup files. Primary Database: 'UK' 2010-04-01 10:00:01.96 The restore operation completed with errors. Secondary ID: 'c066bb63-930c-4b73-861c-f59f0a38c12c' It was happily humming along until I checked it this morning. Some additional details. In the Logshipping folder, there is one file UK_20100324090001.trn dated on the 2009-3-24. The next most recent .trn file is the UK_20100374090001.trn which is the file that was applied during the restore. Why is there an older trn file seemingly on it's own? How can I fix this problem? It'll be a real pain to restart the entire logshipping process. x_x

    Read the article

  • MySQL remote access not working - Port Close?

    - by dave.zap
    I am not able to get a remote connection established to MySQL. From my pc I am able to telnet to 3306 on the existing server, but when I try the same with the new server it hangs for few minutes then returns # mysql -utest3 -h [server ip] -p Enter password: ERROR 2003 (HY000): Can't connect to MySQL server on '[server ip]' (110) Here is some output from the server. # nmap -sT -O localhost -p 3306 ... PORT STATE SERVICE 3306/tcp closed mysql ... # netstat -anp | grep mysql tcp 0 0 [server ip]:3306 0.0.0.0:* LISTEN 6349/mysqld unix 2 [ ACC ] STREAM LISTENING 12286 6349/mysqld /DATA/mysql/mysql.sock # netstat -anp | grep 3306 tcp 0 0 [server ip]:3306 0.0.0.0:* LISTEN 6349/mysqld unix 3 [ ] STREAM CONNECTED 3306 1411/audispd # lsof -i TCP:3306 COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME mysqld 6349 mysql 10u IPv4 12285 0t0 TCP [domain]:mysql (LISTEN) I am running... OS CentOS release 5.8 (Final) mysql 5.5.28 (Remi) Note: Internal connections to mysql work fine. I have disabled IPtables, the box has no other firewall, it runs Apache on port 80 and ssh no problem. Had followed this tutorial - http://www.cyberciti.biz/tips/how-do-i-enable-remote-access-to-mysql-database-server.html I have bound the IP address in my.cnf user=mysql bind-address = [sever ip] port=3306 I even started over by deleting the mysql folder in my datastore and running mysql_install_db --datadir=/DATA/mysql --force Then recreated all the users as per the manual... http://dev.mysql.com/doc/refman/5.5/en/adding-users.html I have created one test user CREATE USER 'test'@'%' IDENTIFIED BY '[password]'; GRANT ALL PRIVILEGES ON *.* TO 'test'@'%' WITH GRANT OPTION; FLUSH PRIVILEGES; So all I can see is that the port is not really open. Where else might I look? thanks

    Read the article

  • Performance of file operations on thousands of files on NTFS vs HFS, ext3, others

    - by peterjmag
    [Crossposted from my Ask HN post. Feel free to close it if the question's too broad for superuser.] This is something I've been curious about for years, but I've never found any good discussions on the topic. Of course, my Google-fu might just be failing me... I often deal with projects involving thousands of relatively small files. This means that I'm frequently performing operations on all of those files or a large subset of them—copying the project folder elsewhere, deleting a bunch of temporary files, etc. Of all the machines I've worked on over the years, I've noticed that NTFS handles these tasks consistently slower than HFS on a Mac or ext3/ext4 on a Linux box. However, as far as I can tell, the raw throughput isn't actually slower on NTFS (at least not significantly), but the delay between each individual file is just a tiny bit longer. That little delay really adds up for thousands of files. (Side note: From what I've read, this is one of the reasons git is such a pain on Windows, since it relies so heavily on the file system for its object database.) Granted, my evidence is merely anecdotal—I don't currently have any real performance numbers, but it's something that I'd love to test further (perhaps with a Mac dual-booting into Windows). Still, my geekiness insists that someone out there already has. Can anyone explain this, or perhaps point me in the right direction to research it further myself?

    Read the article

  • How to automatically remove Flash history/privacy trail? Or stop Flash from storing it?

    - by Arjan van Bentem
    Many people have heard about third-party cookies, and some browsers even block those by default. Some people may even be using Private Browsing modes. However, only few seem to realise that Adobe's Flash player also leaves a cross-browser trail on your local hard drive, and allows for sending cookie-like information back to the server, including third-party sites. And because it is a plugin, Flash does not take any of the browser's privacy settings into account. Sorry for the long post, but first some details about why using Flash raises a privacy concern, followed by the results of my tests: The Flash player keeps a cross-browser history of the domain names of the Flash-sites your computer has visited. Unlike your browser's history, this history is not limited to a certain number of days. History is also recorded while using so-called Private Browsing modes. It is stored on your hard drive (though, as described below, without going to Adobe's site you won't know what is stored). I am not sure if any date and time information is kept about each visit, but to see the domain names: right-click on some Flash content, open the settings dialog, and click the Help icon or click the Advanced button within the Privacy tab. This opens a browser to the help pages on Adobe.com, where one can click through to the Website Storage Settings panel. One can clear the existing list, but one cannot stop it from being recorded again. Flash allows for storing data on your local hard drive, using so-called Local Shared Objects (aka "Flash Cookies"). Just like HTTP cookies, this data can be sent back to the server, for tracking purposes. They are cross-browser, have no expiration date, and no user defined maximum lifetime can be set in the Flash preferences either. These not being HTTP cookies, they are (of course) not blocked by a browser's cookies preferences and are not removed when the normal HTTP cookies are deleted. Adobe has announced that version 10.1 will obey Private Browsing in most popular browsers, but unfortunately no word about also removing the data whenever normal cookies are deleted manually. And its implementation might be confusing: [..] if the browser is in normal browsing mode when the Flash Player instance is created, then that particular instance will forever be in normal browsing mode (private browsing is turned off). Accordingly, toggling private browsing on or off without refreshing the page or closing the private browsing window will not impact Flash Player. Local Shared Objects are not limited to the site you visit, and third-party storage is enabled by default. At the Global Storage Settings panel one can deselect the default Allow third-party Flash content to store data on your computer. Because of the cross-browser and expiration-less nature (and the fact that few people know about it), I feel that the cross-browser third-party Flash Cookies are more dangerous for visitor tracking than third-party normal HTTP cookies. They are even used to restore plain HTTP cookies that the user tried to delete: "All advertisers, websites and networks use cookies for targeted advertising, but cookies are under attack. According to current research they are being erased by 40% of users creating serious problems," says Mookie Tenembaum, founder of United Virtualities. "From simple frequency capping to the more sophisticated behavioral targeting, cookies are an essential part of any online ad campaign. PIE ["Persistent Identification Element"] will give publishers and third-party providers a persistent backup to cookies effectively rendering them unassailable", adds Tenembaum. [..] To justify this tracking mechanism, UV's Tenembaum said, "The user is not proficient enough in technology to know if the cookie is good or bad, or how it works." When selecting None (zero KB) for Specify the amount of disk space that website websites that you haven't yet visited can use to store information on your computer, and checking Never ask again then some sites do not work. However, the same site might work when setting it to None but without selecting Never ask again, and then choose Deny whenever prompted. Both options would result in zero KB of data being allowed, but the behaviour differs. The plugin also provides a Flash Player cache for Adobe-signed files. I guess these files are not an issue. So: how to automatically delete that information? On a Mac, one can find a settings.sol file and a folder for each visited Flash-website in: $HOME/Library/Preferences/Macromedia/Flash Player/macromedia.com/support/flashplayer/sys/ Deleting the settings.sol file and all the folders in sys, removes the trail from the settings panels. However, the actual Local Shared Ojects are elsewhere (see Wikipedia for locations on other operating systems), in a randomly named subfolder of: $HOME/Library/Preferences/Macromedia/Flash Player/#SharedObjects But then: how to remove this automatically? Simply removing the folders and the settings.sol file every now and then (like by using launchd or Windows' Task Scheduler) may interfere with active browsers. Or is it safe to assume that, given the cross-browser nature, the plugin would not care if things are removed while it is active? Only clearing during log-off may not work for those who hibernate all the time. Firefox users can install BetterPrivacy or Objection to delete the Local Shared Objects (for all others browsers as well). I don't know if that also deletes the trail of website domain names. Or: how to stop Flash from storing a history trail? Change of plans: I'm currently testing prohibiting Flash to write to its own sys and #SharedObjects folders. So far, Flash has not tried to restore permissions (though, when deleting the folders, Flash will of course recreate them). I've not encountered any problems but this may take some while to validate, using multiple browsers and sites. I've not yet found a log that reports errors. On a Mac: cd "$HOME/Library/Preferences/Macromedia/Flash Player/macromedia.com/support/flashplayer" rm -r sys/* chmod u-w sys cd "$HOME/Library/Preferences/Macromedia/Flash Player" # preserve the randomly named subfolders (only preserving the latest would suffice; see below) rm -r \#SharedObjects/*/* chmod -R u-w \#SharedObjects I guess the above chmods cannot be achieved on an old Windows system (I'm not sure about XP and Vista?). Though maybe on Windows one could replace the folders sys and #SharedObjects with dummy files with the same names? Anyone? Obviously, keeping Flash from storing those Local Shared Objects for all sites may cause problems. Some test results (Flash 10 on Mac OS X): When blocking the sys folder (even when leaving the #SharedObjects folder writable) then YouTube won't remember your volume settings while viewing multiple videos. Temporarily allowing write access to the blocked folders while visiting trusted sites (to only create folders for domains you like, maybe including references in settings.sol) solves that. This way, for YouTube, Flash could be allowed to write to sys/#s.ytimg.com and #SharedObjects/s.ytimg.com, while Flash could not create new folders for other domains. One may also need to make settings.sol read-only afterwards, or delete it again. When blocking both the sys and #SharedObjects folders, YouTube and Vimeo work fine (though they might not remember any settings). However, Bits on the Run refuses to even show the video player. This is solved by temporarily unblocking the #SharedObjects folder, to allow Flash to create a subfolder with some random name. Within this folder, it would create yet another folder for the current Flash website (content.bitsontherun.com). Removing that website-specific folder, and blocking both #SharedObjects and the randomly named subfolder, still seems to allow Bits on the Run to operate, even though it still cannot write anything to disk. So: the existence of the randomly named subfolder (even when write protected) is important for some sites. When I first found the #SharedObjects folder, it held many subfolders with random names, some created on the very same day. I wonder when Flash decides it wants a new folder, and how it determines (and remembers) that random name. For a moment I considered not blocking write access for sys and #SharedObjects, but explicitly creating read-only folders for well-known third-party tracking domains (like based on a list from, for example, AdBlock Plus). That way, any other domain could still create Local Shared Objects. But the list would be long, and the domains from AdBlock Plus are probably all third-party domains anyway, so disabling Allow third-party Flash content to store data on your computer might have the very same result. Any experience anyone? (Final notes: if the above links to the settings panels do not work in the future, then use the URL that is known to Flash player as a starting point: www.adobe.com/go/settingsmanager. See also "You Deleted Your Cookies? Think Again" at Wired.com -- which uses Flash cookies itself as well... For the very suspicious using Time Machine: you may want to exclude both folders, for each user, and remove the trace that is already on your backup.)

    Read the article

  • Force Windows Local Subnet Traffic through a Gateway

    - by Beerey
    Hi all, We are attempting to route all traffic from a certain machine to a gateway. This works ok for traffic destined for subnets outside of the machine's subnet. However, traffic to machines in the same subnet as the source machine goes through an On-Link gateway in Windows. This means that the default gateway is ignored, and traffic in a subnet (for example, 192.168.50.10 - 192.168.50.11) flows. Destination Netmask Gateway Interface Metric 192.168.50.0 255.255.255.0 On-link 192.168.50.214 276 This route can be deleted from Windows, but when the machine is rebooted it always comes back. Adding a persistant static route to the gateway with a lower metric doesn't work, since it will still try the On-Link gateway after the persistant route fails. Adding each machine in a VLAN isn't an option due to the setup we have Adding a startup script to delete the gateway isn't a great option either, since users will have full admin access to the machine and might disable the script. We cannot transperantly intercept all network traffic on the subnet using Gratuitous ARPs or transparent proxying, since there are other machines on the subnet which use a different gateway The only way we have gotten it to work is by adding a persistant route to the gateway for the subnet traffic, and deleting the On-link route on reboot. The question is then. Is there a way to permanently remove this On-link route If not, is there a way to otherwise force even local subnet traffic to go through a gateway?

    Read the article

  • Recursive move utility on Unix?

    - by Thomas Vander Stichele
    Sometimes I have two trees that used to have the same content, but have grown out of sync (because I moved disks around or whatever). A good example is a tree where I mirror upstream packages from Fedora. I want to merge those two trees again by moving all of the files from tree1 into tree2. Usually I do this with: rsync -arv tree1/* tree2 Then delete tree1. However, this takes an awful lot of time and disk space, and it would be much easier to be able to do: mv -r tree1/* tree2 In other words, a recursive move. It would be faster because first of all it would not even copy, just move the inodes, and second I wouldn't need a delete at the end. Does this exist ? As a test case, consider the following sequence of commands: $ mkdir -p a/b $ touch a/b/c1 $ rsync -arv a/ a2 sending incremental file list created directory ./ b/ b/c1 b/c2 sent 173 bytes received 57 bytes 460.00 bytes/sec total size is 0 speedup is 0.00 $ touch a/b/c2 What command would now have the effect of moving a/b/c2 to a2/b/c2 and then deleting the a subtree (since everything in it is already in the destination tree) ?

    Read the article

  • How do I fix this Windows 7 wireless connectivity issue?

    - by Charles Randall
    I have a laptop with an Intel Wireless Centrino 6300 module. Recently, the machine has stopped properly connecting to my wireless router. It will get stuck in a loop of connecting, then disconnecting and reconnecting. While connected, it will simply say "No Internet Access." Running inSSIDer 2.0, it shows my network jumping around between two channels -- I know this isn't the case, because I've set my router to sit on one single channel. My MacBook Pro, Boxee Box, PS3, and Xbox 360 all connect fine to the wireless and have no problems at all. I know it's not the wireless module, as I bought a second one recently assuming the first had died -- but I get the same behavior with both. Sometimes, I can fix the issue temporarily by deleting the network (Using the Manage Wireless Networks page), and then re-adding it (via standard wireless methods). Then it will work for a few days. But inevitably the problem comes back, and now the laptop simply won't connect to the wireless at all, even if I take steps that usually work. Since I've ruled out the hardware, and it's unlikely some kind of interference issue (because I would expect to see it on any multitude of other devices), I would think at this point that it's a problem with Windows itself. One thing that might be a hint, even though I delete the network, when I add it again, it's always listed as "Wireless Network Connection 2" even though there isn't another in the list.

    Read the article

  • Is there a way to know what the Windows Disk Cleanup utility will delete?

    - by Cam Jackson
    When I run the Disk Cleanup utility that's built into Windows 8, it tells me that it can free up 53GB by deleting 'Temporary Files'. However, a CCleaner analysis on default settings only finds about 300MB worth of space to free up, so I'm wondering what Disk Cleanup has found that CCleaner does not. Note that this question appears to be similar to what I'm asking, but the accepted answer says that 'Temporary Files' refers to %TEMP%. I've already cleared out most of C:\Users\Cam\AppData\Local\Temp, and it now has only 230MB of stuff in it, even with system files showing. So where is this 53GB located? Is there a way to find out what it is? Edit: I should note that this is on a 110GB SSD, so it's almost half the drive. And in fact I'm only using 86GB, so if it's really going to clear out 53GB, that would be more than 60% of the stuff on my C drive. I'm starting to think that Disk Cleanup caches its analysis, and hasn't updated since I started cleaning up the drive earlier today. Although when I run it it says that it's 'Calculating' how much space can be saved, and it takes about 5-10 seconds to do so. Hmmm... Edit2: Here is what my hard drive looks like, according to SpaceMonger (Right click-Open image in new tab, so you can see it properly): You can see why I was starting to think that the 53GB figure is actually wrong. Even if 'Temporary Files' includes my hiberfil and everything in WinSxS (about 13GB total), that would be 26GB, which is only halfway there. Hard to see where there's 53GB of stuff to delete.

    Read the article

  • phpBB configuration problem under Nginx

    - by zvikico
    Hi, I have a phpBB site running with Nginx (PHP via FastCGI). It works OK. However, some specific actions like moving or deleting a topic fail. Instead, I'm redirected to the forum index. I think it is a problem with the URLs redirection or rewriting. My rewrite rule looks like this: if (!-e $request_filename) { rewrite ^/(.*)$ /index.php?q=$1 last; break; } Any help would be appreciated. My full configuration file is: server { listen 80; server_name forum.xxxxx.com; access_log /xxxxx/access.log; error_log /xxxxx/error.log; location = / { root /xxxxx/phpBB3/; index index.php; } location / { root /xxxxx/phpBB3/; index index.php index.html; if (!-e $request_filename) { rewrite ^/(.*)$ /index.php?q=$1 last; break; } } error_page 404 /index.php; error_page 403 /index.php; error_page 500 502 503 504 /index.php; # serve static files directly location ~* ^.+\.(jpg|jpeg|gif|css|png|js|ico)$ { access_log off; expires 30d; root /xxxxx/phpBB3/; break; } # hide protected files location ~* \.(engine|inc|info|install|module|profile|po|sh|.*sql|theme|tpl(\.php)?|xtmpl)$|^(code-style\.pl|Entries.*|Repository|Root|Tag|Template)$ { deny all; } location ~ \.php$ { fastcgi_pass 127.0.0.1:8888; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME /xxxxx/phpBB3/$fastcgi_script_name; fastcgi_param QUERY_STRING $query_string; fastcgi_param REQUEST_METHOD $request_method; fastcgi_param CONTENT_TYPE $content_type; fastcgi_param CONTENT_LENGTH $content_length; fastcgi_param REMOTE_ADDR $remote_addr; fastcgi_param REMOTE_PORT $remote_port; } }

    Read the article

  • Persistent static route stops working after VPN drops and reconnects

    - by user76157
    I've got a VPN between two networks, one home and one office (A and B). Their subnets are: (A) 192.168.1.0 and (B) 192.168.0.0 The two networks have identical ADSL routers. Unfortunately these can only do dial-out VPN. So I've got a Windows 2008 server on Network B acting as a VPN server (ServerB). Network A's router (RouterA) passes through Network B's router and connects via PPTP to ServerB. RouterA is assigned the static IP 192.168.0.40 on Network B. There's a persistent static route on ServerB telling it to use 0.40 for all requests to Network A's subnet, 192.168.1.0. (route -p add 192.168.1.0 mask 255.255.255.0 192.168.0.40). This enables ServerB to ping all machines on A (and those machines to ping ServerB). The VPN connection occasionally drops (I'm not sure why - it's set to remain always on and seems to drop randomly). This wouldn't be too much of a problem, as it reconnects automatically and quickly, except that when it does reconnect, the static route on ServerB no longer works. Route print (on ServerB) shows that the persistent static route still exists. However a tracert to a machine on Network A doesn't use the static route; it tries instead to use ServerB's default gateway (which is RouterB), and fails to find the machine. Deleting and re-adding the static route fixes the problem - a tracert uses the static route. At the moment, a batch file to delete and re-add the static route is scheduled to run every day. But this is clearly far from an ideal solution! I hope that's not too confusing. Any help would be very much appreciated.

    Read the article

  • SSH garbling characters in vim/nano on remote server

    - by geerlingguy
    ... and it's driving me insane. Basically (this has been happening over the past couple months), I log into a few different CentOS servers (one Linode, another VPS, and a shared host to which I have shell access), running 5.5, 5.7, and 6, from my Mac running OS X Lion, using Terminal. Basically: $ ssh [email protected] [remote-host] $ nano somefile.txt Once I start editing the file, if I use the arrow keys to move around the cursor, or start deleting, then typing again, the cursor jumps around a bit, and if I save the file and reopen it, it's obvious that the cursor was, in fact, jumping all over the place on a line for no apparent reason. I end up getting things like "This is a neof text." When I had typed in (to the cursor-crazy editor) "This is a line of text." It's a big problem when it comes to editing configuration files, because I often have to edit one line, save and close, then reopen just to make sure that line is right... then edit another line... and it's getting quite annoying. I found Linode Lish Shell Vim and Nano rendering troubles: lines not appearing / cursor positions wrong, but I don't know if that relates much, since that's specifically referring to lish.

    Read the article

  • Cisco "copy startup-config tftp" results in a 0 byte file on the server?

    - by Geoffrey
    I'm pulling my hair out figuring this out. My startup-config is good, I can view it with a show command. I'm trying to copy it to a tftp server: asa5505# copy startup-config tftp Address or name of remote host []? ipaddress Destination filename [startup-config]? t !! %Error writing tftp://ipaddress/t (Timed out attempting to connect) On my TFTP server (SolarWinds), I get the following: binary, PUT. Started file name: C:\TFTP-Root\t binary, PUT. File Exists, C:\TFTP-Root\t binary, PUT. Deleting Existing File. binary, PUT. Interrupted by client, cause: The process cannot access the file 'C:\TFTP-Root\t' because it is being used by another process I've used tftpd32 with same results. I've tried different servers, even one on the same network as the asa ... same results. It'll create a 0 byte file and never do the dump. What's going on? Everything is working normally except for this.

    Read the article

< Previous Page | 54 55 56 57 58 59 60 61 62 63 64 65  | Next Page >