Search Results

Search found 11111 results on 445 pages for 'fahnz mode'.

Page 58/445 | < Previous Page | 54 55 56 57 58 59 60 61 62 63 64 65  | Next Page >

  • Failure to obtain IP with ARP over Wi-Fi with personal Wi-Fi router in client mode

    - by axk
    I'm trying to connect a Samsung TV to the Internet using a TL-MR3020 personal wireless router in client mode. The TV fails to connect to the network. It sees the ethernet cable connected though. Here's my network topology: Here's what I've captured with Wireshark filtering for ARP (eth.type == 0x0806): It appears the TV fails to get the IP of the gateway (DSL modem/router) for some reason. One thing I've noticed is that the source MAC for the ARP requests coming from the TV is the MAC of the Portable wireless router (that is cd:89:00), not the TV itself and the modem sends the responses to that MAC (I'm not an expert and don't know if its okay or it may make the TV fail to get the requested IP). Also I'm able to ping the TV from the DSL router (through the telnet interface) and the router has an entry in its MAC table for the TV's IP with the Portable wireless router's MAC (that is cd:89:00). If I'm able to ping the TV I suppose it should know the router's MAC to respond to the ping, but then why these continuous ARP requests... I've also tried to connect my desktop trough this Portable wireless router the same way I'm trying to connect the TV and it works fine, I can set the DSL Modem's IP as the default gateway on the desktop's NIC and connect to the Internet. The TV can connect to the Internet when connected to the DSL Router with a wired connection. Any suggestions on what may be the cause of the problem / how to further debug it are welcome. Thanks!

    Read the article

  • Easiest way to allow direct HTTPS connection in Intercept mode?

    - by Nicolo
    I know the SSL issue has been beaten to death I'm using DNS redirect to force my clients to use my intercept proxy. As we all know, intercepting HTTPS connection is not possible unless I provide a fake certificate. What I want to achieve here is to allow all HTTPS requests connect directly to the source server, thus bypassing Squid: HTTP connection Proxy by Squid HTTPS connection Bypass Squid and connect directly I spent the past few days goolging and trying different methods but none worked so far. I read about SSL tunneling using the CONNECT method but couldn't find any more information on it. I tried a similar method in using RINETD to forward all traffic going through port 443 of my Squid back to the original IP of www.pandora.com. Unfortunately, I did not realize all other HTTPS requests are also forwarded to the IP of www.pandora.com. For example, https://www.gmail.com also takes me to https://www.pandora.com Since I'm running the Intercept mode, the forwarding needs to be dynamic and match each HTTPS domain name with proper original IP. Can this be done in Squid or iptables? Lastly, I'm directing traffic to my Squid server using DNS zone redirect. For example, a client requests www.google.com, my DNS server directs that request to my Squid IP, then my transparent Squid will proxy that request. Will this set up affect what I'm trying to achieve? I tried many methods but couldn't get it to work. Any takes on how to do this?

    Read the article

  • SAFE MODE Restriction in effect. The script not allowed to access directory owned by uid

    - by user57221
    I am running a dedicated server with multiple websites. I have created a global directory for common scripts for all websites, rather than repeating them in every website directory. How can I make this global directory accessible for all website. I am getting following error. Warning: require_once() [function.require-once]: SAFE MODE Restriction in effect. The script whose uid is XXXX is not allowed to access /vhosts/globallibrary/Zend/Application.php owned by uid XXXX I have change the ownership of global directory for X website. so it works fine for X website. latter I added another website Y Now I am getting the same error again. If I change the CHOWN for Y website then X website will have the same error. I don't want to disable the safemode restriction. Is there a work around, so that this global dir will be accessible by all website. I am getting following error in my browser when I try to access global directory. Global directory is on same level as all other websites. Is this a good practice to enable safemode for websites?

    Read the article

  • Ubuntu 11.04 fresh install - "Input signal out of range" or "Mode not supported..."

    - by Dennis
    I recently installed Ubuntu 11.04 using a CD .iso. Installation went fine. Upon completion I rebooted and after a second or two I got a black screen with the message "Input signal out of range". And there it sits... Read a few things about how this could be related to screen resolution, refresh rate, etc. For the heck of it I tried a different monitor. The result is the same but the message provides some clues - "Mode not supported - H:92.7kHz, V:58.3Hz" (the latter is Hz; not kHz). So my thought is that I should probably be able to use the 11.04 install disc to "Try out Ubuntu", find and edit some file that was created by the install with the correct values. Problem is, I am not too sure what I am supposed to edit. Looked at the xorg.conf file but this is so minimal at this point I am not sure it is where I want to go. By the way, the monitor is an I-Inc ix191a. Anyone have any ideas on how to get around this?

    Read the article

  • Need software to convert RAR to ZIP ("store" mode - no compression) * Extract->re-archive changes date/time attributes

    - by Larry78
    I have tried all of the following applications (download.cnet.com - the free ones), and none of them will convert an RAR archive to a ZIP, without compressing the files ("store" mode). 7-ZIP would be fine, too. [The RAR is a "solid" archive with password (I know it), files "stored" - no compression, used WinRAR 3.5.1] PeaZip, 7-Zip, FilZip, TugZip, SimplyZipSE, QuickZip, WinShrink. (A couple of the apps let you try, but the program gives an error - indicating how bad the software is. (Like "unknown header # #.") None of these apps will do the conversion at all. IZArc 4.1 comes the closest. It will convert an RAR to a ZIP, but it compresses the zip. There is a general preference setting to "store" - but it doesn't effect conversions. I don't want to extract the RAR files and re-archive them because I need to preserve the modified/created file attributes. IZArc preserves them, but it compresses the files. WinRAR has the option to convert archives, but I get the error "skipping encryped archive" when I try to convert it. It asks for the password first, and I know it's right because that password opens the archive, and I can read/view all the files in the archive.

    Read the article

  • Can't login to Windows server 2008 (as any user, not even locally, not in safe mode but I have right credentials)

    - by Saix
    Just from nowhere I can't login to my Windows server 2008 machine. All the services like FTP server or webserver (which I'm actually not using, just remote desktop and FTP) are running. Whatever credentials I try (even/especialy administrator), it always says Unknown Username or bad password. I have already tried hard turn off/on and safe mode without luck. Also I already tried type in login name as SERVER NAME\user or Workgroup\user (every case sensitive scenario), still says I have wrong login. Usually we are using remote desktop to access the machine but local access over KVM doesn't work either. Now I'm lock out of any control or any way to do something. There's just logon screen preceding by ctrl+alt+del to login alert. Without me able to login I can't actually try to fix anything. Can't find much more on Internet except the SERVER NAME\user thing. Reinstall would be the last resort but I can't let things this way for much longer anyway. This server is vital. If it would be any help, I think automatic Windows updates are turned off and there were no updates or newly installed software for last couple years and just few soft restarts, non of them recently. It happened during it's runtime while all other services were still up and running, so this couldn't be just some Windows nasty screw up during boot or something. What could have possibly changed? What are my options now?

    Read the article

  • How to install Oracle Weblogic Server using OS-specific Package installer?(Linux/Solaris)

    - by PratikS -- Oracle
    Note: OS-specific Package installer As the name suggests the installer is platform specific. It is meant for installation with a 32bit JVM only. Both SUN and JROCKIT 32 bit JDKs come bundled with "OS-specific Package installer", so no need to install the JDK in advance. There are three different ways of installing Oracle Weblogic Server: Graphical mode Console mode Silent mode For Linux/Solaris: Steps to install OS-specific Package .bin installer(for Linux/Solaris) are almost same as windows except for the way we launch the installation.Installer: wls_<version>_<linux/solaris>32.bin (E.g. wls1036_linux32.bin/wls1036_solaris32.bin) 1) Graphical mode: Log in to the target UNIX system. Go to the directory that contains the installation program.(Make sure GUI is enabled or else it will default to console mode) Launch the installation by entering the following commands: [weblogic@pratik ~]$ pwd/home/oracle[weblogic@pratik ~]$ cd WLSInstallers/[weblogic@pratik WLSInstallers]$ ls -ltrtotal 851512-rw-rw-r-- 1 oracle oracle 871091023 Dec 22  2011 wls1036_linux32.bin[weblogic@pratik WLSInstallers]$ chmod a+x wls1036_linux32.bin[weblogic@pratik WLSInstallers]$ ls -ltrtotal 851512-rwxrwxr-x 1 oracle oracle 871091023 Dec 22  2011 wls1036_linux32.bin[weblogic@pratik WLSInstallers]$ ./wls1036_linux32.bin As soon as you run ./wls1036_linux32.bin with GUI enabled you would see the following screen: Rest of the screens and steps are similar to that of Graphical mode installation on windows, refer: How to install Oracle Weblogic Server using OS-specific Package installer?(Windows) 2) Console mode: Log in to the target UNIX system. Go to the directory that contains the installation program. Launch the installation by entering the following commands: [weblogic@pratik ~]$ pwd/home/oracle[weblogic@pratik ~]$ cd WLSInstallers/[weblogic@pratik WLSInstallers]$ ls -ltrtotal 851512-rw-rw-r-- 1 weblogic weblogic 871091023 Dec 22  2011 wls1036_linux32.bin[weblogic@pratik WLSInstallers]$ chmod a+x wls1036_linux32.bin[weblogic@pratik WLSInstallers]$ ls -ltrtotal 851512-rwxrwxr-x 1 weblogic weblogic 871091023 Dec 22  2011 wls1036_linux32.bin [weblogic@pratik WLSInstallers]$ ./wls1036_linux32.bin -mode=consoleExtracting 0%....................................................................................................100%<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->Welcome:--------This installer will guide you through the installation of WebLogic 10.3.6.0.Type "Next" or enter to proceed to the next prompt.  If you want to change data entered previously, type "Previous".  You may quit the installer at any time by typing "Exit".Enter [Exit][Next]> Next<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->Choose Middleware Home Directory:--------------------------------- ->1|* Create a new Middleware Home   2|/home/oracle/wls_12cEnter index number to select OR [Exit][Previous][Next]> Next<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->Choose Middleware Home Directory:---------------------------------    "Middleware Home" = [Enter new value or use default"/home/oracle/Oracle/Middleware"]Enter new Middleware Home OR [Exit][Previous][Next]> /home/oracle/WLS1036<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->Choose Middleware Home Directory:---------------------------------    "Middleware Home" = [/home/oracle/WLS1036]Use above value or select another option:    1 - Enter new Middleware Home    2 - Change to default [/home/oracle/Oracle/Middleware]Enter option number to select OR [Exit][Previous][Next]> Next<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->Register for Security Updates:------------------------------Provide your email address for security updates and  to initiate configuration manager.   1|Email:[]   2|Support Password:[]   3|Receive Security Update:[Yes]Enter index number to select OR [Exit][Previous][Next]> 3<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->Register for Security Updates:------------------------------Provide your email address for security updates and  to initiate configuration manager.    "Receive Security Update:" = [Enter new value or use default "Yes"]Enter [Yes][No]? No<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->Register for Security Updates:------------------------------Provide your email address for security updates and  to initiate configuration manager.    "Receive Security Update:" = [Enter new value or use default "Yes"]    ** Do you wish to bypass initiation of the configuration manager and    **  remain uninformed of critical security issues in your configuration?Enter [Yes][No]? Yes<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->Register for Security Updates:------------------------------Provide your email address for security updates and  to initiate configuration manager.   1|Email:[]   2|Support Password:[]   3|Receive Security Update:[No]Enter index number to select OR [Exit][Previous][Next]>Next<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->Register for Security Updates:------------------------------Provide your email address for security updates and  to initiate configuration manager.   1|Email:[]   2|Support Password:[]   3|Receive Security Update:[No]Enter index number to select OR [Exit][Previous][Next]> Next<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->Choose Install Type:--------------------Select the type of installation you wish to perform. ->1|Typical    |  Install the following product(s) and component(s):    | - WebLogic Server    | - Oracle Coherence   2|Custom    |  Choose software products and components to install and perform optional    |configuration.Enter index number to select OR [Exit][Previous][Next]> Next<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->Choose Product Installation Directories:----------------------------------------Middleware Home Directory: [/home/oracle/WLS1036]Product Installation Directories:   1|WebLogic Server: [/home/oracle/WLS1036/wlserver_10.3]   2|Oracle Coherence: [/home/oracle/WLS1036/coherence_3.7]Enter index number to select OR [Exit][Previous][Next]> Next<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->The following Products and JDKs will be installed:--------------------------------------------------    WebLogic Platform 10.3.6.0    |_____WebLogic Server    |    |_____Core Application Server    |    |_____Administration Console    |    |_____Configuration Wizard and Upgrade Framework    |    |_____Web 2.0 HTTP Pub-Sub Server    |    |_____WebLogic SCA    |    |_____WebLogic JDBC Drivers    |    |_____Third Party JDBC Drivers    |    |_____WebLogic Server Clients    |    |_____WebLogic Web Server Plugins    |    |_____UDDI and Xquery Support    |    |_____Evaluation Database    |_____Oracle Coherence    |    |_____Coherence Product Files    |_____JDKs         |_____SUN SDK 1.6.0_29         |_____Oracle JRockit 1.6.0_29 SDK    *Estimated size of installation: 1,276.0 MBEnter [Exit][Previous][Next]> Next<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->Installing files..0%          25%          50%          75%          100%[------------|------------|------------|------------][***************************************************]<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->Installing JDK....0%          25%          50%          75%          100%[------------|------------|------------|------------][***************************************************]Performing String Substitutions...<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->Configuring OCM...0%          25%          50%          75%          100%[------------|------------|------------|------------][***************************************************]Creating Domains...<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->Installation CompleteCongratulations! Installation is complete.Press [Enter] to continue or type [Exit]> [weblogic@pratik ~]$ Note: All the inputs are in Bold 3) Silent mode:              1) Log in to the target Unix system.             2) Create a silent.xml file that defines the configuration settings normally entered by a user during an interactive installation process, such as graphical-mode or console-mode installation. <?xml version="1.0" encoding="UTF-8"?><bea-installer>     <input-fields>        <data-value name="BEAHOME" value="/home/oracle/WLS1036" />        <data-value name="WLS_INSTALL_DIR" value="/home/oracle/WLS1036/wlserver_10.3" />        <data-value name="COMPONENT_PATHS" value="WebLogic Server|Oracle Coherence" />    </input-fields></bea-installer> <!-- Note: This sample silent.xml file is used to install all the components of WebLogic Server and Oracle Coherence. All the values in Bold are the variables. -->               3) Place the silent.xml file in the same directory as where the WebLogic Server Package installer is located.              4) Go to the directory that contains the installation program.              5) Start the installer as follows: [weblogic@pratik WLSInstallers]$ chmod a+x wls1036_linux32.bin[weblogic@pratik WLSInstallers]$ ls -ltrtotal 851516-rwxrwxr-x 1 weblogic weblogic 871091023 Dec 22  2011 wls1036_linux32.bin-rw-rw-r-- 1 weblogic weblogic       331 Jul  5 03:48 silent.xml[weblogic@pratik WLSInstallers]$ cat silent.xml<?xml version="1.0" encoding="UTF-8"?><bea-installer>        <input-fields>                <data-value name="BEAHOME" value="/home/oracle/WLS1036" />                <data-value name="WLS_INSTALL_DIR" value="/home/oracle/WLS1036/wlserver_10.3" />                <data-value name="COMPONENT_PATHS" value="WebLogic Server|Oracle Coherence" />        </input-fields></bea-installer>[weblogic@pratik WLSInstallers]$ ./wls1036_linux32.bin -mode=silenlent.xml -log=/home/oracle/WLSInstallers/install.logExtracting 0%....................................................................................................100%[weblogic@pratik WLSInstallers]$ -log=/home/oracle/WLSInstallers/install.log creates a installation log(install.log) under "/home/oracle/WLSInstallers/", when installation completes you will see the following printed in the log file: 2012-07-05 03:59:36,788 INFO  [WizardController] com.bea.plateng.wizard.silent.tasks.LogTask - The installation was successfull! For other configurable values in silent.xml refer: Values for the Sample silent.xml File for WebLogic Server Important links to Refer: Running the Installation Program in Graphical Mode Running the Installation Program in Console Mode Running the Installation Program in Silent Mode

    Read the article

  • Server.CreateObject Fails when calling .Net object from ASP on 64-bit windows in IIS 32-bit mode

    - by DrFredEdison
    I have a server running Windows 2003 64-bit, that runs IIS in 32-bit mode. I have a COM object that was registered using the following command: C:\WINDOWS\microsoft.net\Framework\v2.0.50727>regasm D:\Path\To\MyDll.dll /tlb:MyTLB.tlb /codebase When I create the object via ASP I get: Server object error 'ASP 0177 : 8000ffff' Server.CreateObject Failed /includes/a_URLFilter.asp, line 19 8000ffff When I create the object in a vbs script and use the 32-bit version of cscript (in \Windows\syswow64) it works fine. I've checked permissions on the DLL, and the IUSR has Read/Execute. Even if I add the IUSR to the Administrators group, I get the same error. This is the log from ProcessMonitor filtering for the path of my dll (annotated with my actions): [Stop IIS] 1:56:30.0891918 PM w3wp.exe 4088 CloseFile D:\Path\To\MyDll.dll SUCCESS [Start IIS] [Refresh ASP page that uses DLL] 1:56:42.7825154 PM w3wp.exe 2196 QueryOpen D:\Path\To\MyDll.dll SUCCESS CreationTime: 8/19/2009 1:11:17 PM, LastAccessTime: 8/19/2009 1:30:26 PM, LastWriteTime: 8/18/2009 12:09:33 PM, ChangeTime: 8/19/2009 1:22:02 PM, AllocationSize: 20,480, EndOfFile: 20,480, FileAttributes: A 1:56:42.7825972 PM w3wp.exe 2196 QueryOpen D:\Path\To\MyDll.dll SUCCESS CreationTime: 8/19/2009 1:11:17 PM, LastAccessTime: 8/19/2009 1:30:26 PM, LastWriteTime: 8/18/2009 12:09:33 PM, ChangeTime: 8/19/2009 1:22:02 PM, AllocationSize: 20,480, EndOfFile: 20,480, FileAttributes: A 1:56:42.7826961 PM w3wp.exe 2196 CreateFile D:\Path\To\MyDll.dll SUCCESS Desired Access: Generic Read, Disposition: Open, Options: Synchronous IO Non-Alert, Non-Directory File, Attributes: N, ShareMode: Read, Delete, AllocationSize: n/a, Impersonating: SERVER2\IUSR_SERVER2, OpenResult: Opened 1:56:42.7827194 PM w3wp.exe 2196 CreateFileMapping D:\Path\To\MyDll.dll SUCCESS SyncType: SyncTypeCreateSection, PageProtection: 1:56:42.7827546 PM w3wp.exe 2196 CreateFileMapping D:\Path\To\MyDll.dll SUCCESS SyncType: SyncTypeOther 1:56:42.7829130 PM w3wp.exe 2196 Load Image D:\Path\To\MyDll.dll SUCCESS Image Base: 0x6350000, Image Size: 0x8000 1:56:42.7830590 PM w3wp.exe 2196 Load Image D:\Path\To\MyDll.dll SUCCESS Image Base: 0x6360000, Image Size: 0x8000 1:56:42.7838855 PM w3wp.exe 2196 CreateFile D:\Webspace\SecurityDll\bin SUCCESS Desired Access: Read Data/List Directory, Synchronize, Disposition: Open, Options: Directory, Synchronous IO Non-Alert, Attributes: n/a, ShareMode: Read, Write, Delete, AllocationSize: n/a, Impersonating: SERVER2\IUSR_SERVER2, OpenResult: Opened 1:56:42.7839081 PM w3wp.exe 2196 QueryDirectory D:\Path\To\MyDll.INI NO SUCH FILE Filter: SecurityDll.INI 1:56:42.7839281 PM w3wp.exe 2196 CloseFile D:\Webspace\SecurityDll\bin SUCCESS [Refresh ASP page that uses DLL] [Refresh ASP page that uses DLL] [Refresh ASP page that uses DLL] This dll works fine on other servers, running 32-bit windows. I can't think of anything else that would make this work. Any suggestions? UPDATE The .dll is not in the GAC, it is compiled as 32-bit, and is Strongly signed.

    Read the article

  • Puppet Directory and File ownership ignored

    - by Phil Sturgeon
    Puppet seems to be lying to me, which is not very nice. I am trying to set some files and directories included in /vagrant/src to be 666 and 777, and set the ownership group to the correct Apache user (using the PuppetLabs Apache module). Output from Puppet says yes. [default] Running provisioner: Vagrant::Provisioners::Puppet... [default] Running Puppet with /tmp/vagrant-puppet/manifests/default.pp... stdin: is not a tty No LSB modules are available. warning: require is a metaparam; this value will inherit to all contained resources warning: notify is a metaparam; this value will inherit to all contained resources notice: /Stage[main]//File[/vagrant/src/addons/]/owner: owner changed 'vagrant' to 'www-data' notice: /Stage[main]//File[/vagrant/src/addons/]/group: group changed 'vagrant' to 'www-data' notice: /Stage[main]//File[/vagrant/src/addons/]/mode: mode changed '0755' to '0777' notice: /Stage[main]//Package[curl]/ensure: ensure changed 'purged' to 'present' notice: /Stage[main]//File[/vagrant/src/system/cms/config/]/owner: owner changed 'vagrant' to 'www-data' notice: /Stage[main]//File[/vagrant/src/system/cms/config/]/group: group changed 'vagrant' to 'www-data' notice: /Stage[main]//File[/vagrant/src/system/cms/config/]/mode: mode changed '0755' to '0777' notice: /Stage[main]//File[/vagrant/src/system/cms/config/config.php]/owner: owner changed 'vagrant' to 'www-data' notice: /Stage[main]//File[/vagrant/src/system/cms/config/config.php]/group: group changed 'vagrant' to 'www-data' notice: /Stage[main]//File[/vagrant/src/system/cms/cache/]/owner: owner changed 'vagrant' to 'www-data' notice: /Stage[main]//File[/vagrant/src/system/cms/cache/]/group: group changed 'vagrant' to 'www-data' notice: /Stage[main]//File[/vagrant/src/system/cms/cache/]/mode: mode changed '0755' to '0777' notice: /Stage[main]//File[/vagrant/src/uploads/]/owner: owner changed 'vagrant' to 'www-data' notice: /Stage[main]//File[/vagrant/src/uploads/]/group: group changed 'vagrant' to 'www-data' notice: /Stage[main]//File[/vagrant/src/uploads/]/mode: mode changed '0755' to '0777' notice: /Stage[main]/Apache/Service[httpd]/ensure: ensure changed 'stopped' to 'running' notice: /Stage[main]//File[/vagrant/src/assets/cache/]/owner: owner changed 'vagrant' to 'www-data' notice: /Stage[main]//File[/vagrant/src/assets/cache/]/group: group changed 'vagrant' to 'www-data' notice: /Stage[main]//File[/vagrant/src/assets/cache/]/mode: mode changed '0755' to '0777' notice: Finished catalog run in 2.29 seconds Output from ls -lah says no: $ ls -lah /vagrant/src/ total 36K drwxr-xr-x 1 vagrant vagrant 510 2012-07-03 00:11 . drwxr-xr-x 1 vagrant vagrant 340 2012-07-03 08:08 .. drwxr-xr-x 1 vagrant vagrant 136 2012-07-03 00:11 addons drwxr-xr-x 1 vagrant vagrant 102 2012-07-03 00:11 assets drwxr-xr-x 1 vagrant vagrant 510 2012-07-03 07:45 .git -rw-r--r-- 1 vagrant vagrant 1.3K 2012-07-03 00:11 .gitignore -rwxr-xr-x 1 vagrant vagrant 1.4K 2012-07-03 00:11 .htaccess -rwxr-xr-x 1 vagrant vagrant 8.8K 2012-07-03 00:11 index.php drwxr-xr-x 1 vagrant vagrant 442 2012-07-03 00:11 installer -rwxr-xr-x 1 vagrant vagrant 2.8K 2012-07-03 00:11 LICENSE -rw-r--r-- 1 vagrant vagrant 1.1K 2012-07-03 00:11 phpdoc.dist.xml -rw-r--r-- 1 vagrant vagrant 3.3K 2012-07-03 00:11 README.md drwxr-xr-x 1 vagrant vagrant 204 2012-07-03 00:11 system -rw-r--r-- 1 vagrant vagrant 42 2012-07-03 00:11 .travis.yml drwxr-xr-x 1 vagrant vagrant 102 2012-07-03 00:11 uploads Whats up with that? My entire config can be found here.

    Read the article

  • what do the various USB charge while sleeping modes mean?

    - by MikeJ
    what do the various USB charge while sleeping modes mean? my new laptop has these sleep while charging modes : mode 4 mode 3 mode 2 mode 1 the list box doesn't tell me what these modes mean or do. I noticed that my iphone is charging really slowly on mode 4. What is it going to do to my power consumption if I change it to something like 1 or 2 ?

    Read the article

  • ubuntu 12.04 broken

    - by Gaurav
    I installed PPA package for BITdefender but somehow the package got broken. Because of this I was not able to boot Ubuntu in normal mode. So i booted in recovery mode and completely removed the broken package using synaptic package manager. But even after removing the broken package I'm unable to boot in normal mode. Everytime i try to boot in normal mode I'm greeted with a black screen! Is there any way to fix this?

    Read the article

  • Why don't languages include implication as a logical operator?

    - by Maciej Piechotka
    It might be a strange question, but why there is no implication as a logical operator in many languages (Java, C, C++, Python Haskell - although as last one have user defined operators its trivial to add it)? I find logical implication much clearer to write (particularly in asserts or assert-like expressions) then negation with or: encrypt(buf, key, mode, iv = null) { assert (mode != ECB --> iv != null); assert (mode == ECB || iv != null); assert (implies(mode != ECB, iv != null)); // User-defined function }

    Read the article

  • Why won't IE let users login to a website unless in In Private mode?

    - by Richard Fawcett
    I'm not entirely sure this belongs on SuperUser.com. I also considered ServerFault.com and StackOverflow.com, but on balance, I think it should belong here? We host a website which has the same code responding to multiple domain names. On 28th December (without any changes deployed to the website) a percentage of users suddenly could not login, and the blank login page was just rendered again even when the correct credentials were entered. The issue is still ongoing. After remote controlling an affected user's PC, we've found the following: The issue affects Internet Explorer 9. The user can login from the same machine on Chrome. The user can login from an In Private browser session using IE9. The user can login if the website is added to the Trusted Sites security zone. The user can NOT login from an IE session in safe mode (started with iexplore -extoff). Only one hostname that the website responds to prevents login, the same user account on the other hostname works fine (note that this is identical code and database running server side), even though that site is not in trusted sites zone. Series of HTTP requests in the failure case: GET request to protected page, returns a 302 FOUND response to login page. GET request to login page. POST to login page, containing credentials, returns redirect to protected page. GET request to protected page... for some reason auth fails and browser is redirected to login page, as in step 1. Other information: Operating system is Windows 7 Ultimate Edition. AV system is AVG Internet Security 2012. I can think of lots of things that could be going wrong, but in every case, one of the findings above is incompatible with the theory. Any ideas what is causing login to fail? Update 06-Jan-2012 Enhanced logging has shown that the .ASPXAUTH cookie is being set in step 3. Its expiry date is 28 days in the future, its path is /, the domain is mysite.com, and its value is an encrypted forms ticket, as expected. However, the cookie is not being received by the web server during step 4. Other cookies are being presented to the server during step 4, it's just this one that is missing. I've seen that cookies are usually set with a domain starting with a period, but mine isn't. Should it be .mysite.com instead of mysite.com? However, if this was wrong, it would presumably affect all users?

    Read the article

  • Apache Tuscany 1.6 How do you set the JMS Binding Delivery Mode to NON_PERSISTENT?

    - by Robert Greiner
    I am using Tuscany 1.6 and am trying to set the Delivery Mode JMS Binding to NON_PERSISTENT. I've tried using uri="jms:MyService?deliveryMode=1" (which is what the spec (PDF) says to do) but, I ended up getting the following exception: Unknown token deliveryMode=1 I also tried <headers JMSDeliveryMode="NON_PERSISTENT"/>, although I did not get an exception the messages still got delivered as PERSISTENT. This is the format for the URI jms:<jms-dest>? connectionFactoryName=<Connection-Factory-Name> & destinationType={queue|topic} deliveryMode=<Delivery-Mode> & timeToLive=<Time-To-Live> & priority=<Priority> & <User-Property>=<User-Property-Value> & … This is the example I am using <composite xmlns="http://www.osoa.org/xmlns/sca/1.0" name="MyValueComposite"> <service name="MyValueService"> <interface.java interface="services.myvalue.MyValueService"/> <binding.jms uri="jms:MyValueServiceQueue?activationSpecName=MyValueServiceAS&... "/> </service> <reference name="StockQuoteService"> <interface.java interface="services.stockquote.StockQuoteService"/> <binding.jms uri="jms:StockQuoteServiceQueue?connectionFactoryName=StockQuoteServiceQCF&deliveryMode=1&... "/> </reference> </composite>

    Read the article

  • How do I run a VBScript in 32-bit mode on a 64-bit machine?

    - by Peter
    I have a text file that ends with .vbs that I have written the following in: Set Conn = CreateObject("ADODB.Connection") Conn.Provider = "Microsoft.ACE.OLEDB.12.0" Conn.Properties("Data Source") = "C:\dummy.accdb" Conn.Properties("Jet OLEDB:Database Password") = "pass" Conn.Open Conn.Close Set Conn = Nothing When I execute this on a Windows 32-bit machine it runs and ends without any notion (expected). When I execute this on a Windows 64-bit machine it gets the error "Provider cannot be found. It may not be properly installed.". But it is installed. I think the root of the problem is that the provider is a 32-bit provider, as far as I know it doesn't exist as 64-bit. If I run the VBScript through IIS on my 64-bit machine (as a ASP file) I can select that it should run in 32-bit mode. It can then find the provider. How can I make it find the provider on Windows 64-bit? Can I tell CScript (which executes the .vbs text file) to run in 32-bit mode somehow?

    Read the article

  • How can I show print statements in debug mode of OPNET Modeler?

    - by Here now
    I'm writing C++ code in OPNET Modeler. I try to simulate my scenario in debugger mode & I need to trace the function that I wrote it. I need to show print statements which I put it in my code. I used in debugger mode: ***ltr function_name()*** then ***c*** But the result looks like: Type 'help' for Command Summary ODB> ltr enqueue_packet() Added trace #0: trace on label (enqueue_packet()) ODB> c |-----------------------------------------------------------------------------| | Progress: Time (1 min. 52 sec.); Events (500,002) | | Speed: Average (82,575 events/sec.); Current (82,575 events/sec.) | | Time : Elapsed (6.1 sec.) | | DES Log: 28 entries | |-----------------------------------------------------------------------------| |-----------------------------------------------------------------------------| | Progress: Time (1 min. 55 sec.); Events (1,000,002) | | Speed: Average (69,027 events/sec.); Current (59,298 events/sec.) | | Time : Elapsed (14 sec.) | | DES Log: 28 entries | |-----------------------------------------------------------------------------| |-----------------------------------------------------------------------------| | Progress: Time (1 min. 59 sec.); Events (1,500,002) | | Speed: Average (51,464 events/sec.); Current (34,108 events/sec.) | | Time : Elapsed (29 sec.) | | DES Log: 28 entries | |-----------------------------------------------------------------------------| |-----------------------------------------------------------------------------| | Simulation Completed - Collating Results. | | Events: Total (1,591,301); Average Speed (48,803 events/sec.) | | Time : Elapsed (33 sec.); Simulated (2 min. 0 sec.) | | DES Log: 29 entries | |-----------------------------------------------------------------------------| |-----------------------------------------------------------------------------| | Reading network model. | |-----------------------------------------------------------------------------| I need to show the print statements in my code. Where it has to be appeared? Is there any step before run the simulation to insure that OPNET debugger using Visual Studio & go through my code??

    Read the article

  • python- scipy optimization

    - by pear
    In scipy fmin_slsqp (Sequential Least Squares Quadratic Programming), I tried reading the code 'slsqp.py' provided with the scipy package, to find what are the criteria to get the exit_modes 0? I cannot find which statements in the code produce this exit mode? Please help me 'slsqp.py' code as follows, exit_modes = { -1 : "Gradient evaluation required (g & a)", 0 : "Optimization terminated successfully.", 1 : "Function evaluation required (f & c)", 2 : "More equality constraints than independent variables", 3 : "More than 3*n iterations in LSQ subproblem", 4 : "Inequality constraints incompatible", 5 : "Singular matrix E in LSQ subproblem", 6 : "Singular matrix C in LSQ subproblem", 7 : "Rank-deficient equality constraint subproblem HFTI", 8 : "Positive directional derivative for linesearch", 9 : "Iteration limit exceeded" } def fmin_slsqp( func, x0 , eqcons=[], f_eqcons=None, ieqcons=[], f_ieqcons=None, bounds = [], fprime = None, fprime_eqcons=None, fprime_ieqcons=None, args = (), iter = 100, acc = 1.0E-6, iprint = 1, full_output = 0, epsilon = _epsilon ): # Now do a lot of function wrapping # Wrap func feval, func = wrap_function(func, args) # Wrap fprime, if provided, or approx_fprime if not if fprime: geval, fprime = wrap_function(fprime,args) else: geval, fprime = wrap_function(approx_fprime,(func,epsilon)) if f_eqcons: # Equality constraints provided via f_eqcons ceval, f_eqcons = wrap_function(f_eqcons,args) if fprime_eqcons: # Wrap fprime_eqcons geval, fprime_eqcons = wrap_function(fprime_eqcons,args) else: # Wrap approx_jacobian geval, fprime_eqcons = wrap_function(approx_jacobian, (f_eqcons,epsilon)) else: # Equality constraints provided via eqcons[] eqcons_prime = [] for i in range(len(eqcons)): eqcons_prime.append(None) if eqcons[i]: # Wrap eqcons and eqcons_prime ceval, eqcons[i] = wrap_function(eqcons[i],args) geval, eqcons_prime[i] = wrap_function(approx_fprime, (eqcons[i],epsilon)) if f_ieqcons: # Inequality constraints provided via f_ieqcons ceval, f_ieqcons = wrap_function(f_ieqcons,args) if fprime_ieqcons: # Wrap fprime_ieqcons geval, fprime_ieqcons = wrap_function(fprime_ieqcons,args) else: # Wrap approx_jacobian geval, fprime_ieqcons = wrap_function(approx_jacobian, (f_ieqcons,epsilon)) else: # Inequality constraints provided via ieqcons[] ieqcons_prime = [] for i in range(len(ieqcons)): ieqcons_prime.append(None) if ieqcons[i]: # Wrap ieqcons and ieqcons_prime ceval, ieqcons[i] = wrap_function(ieqcons[i],args) geval, ieqcons_prime[i] = wrap_function(approx_fprime, (ieqcons[i],epsilon)) # Transform x0 into an array. x = asfarray(x0).flatten() # Set the parameters that SLSQP will need # meq = The number of equality constraints if f_eqcons: meq = len(f_eqcons(x)) else: meq = len(eqcons) if f_ieqcons: mieq = len(f_ieqcons(x)) else: mieq = len(ieqcons) # m = The total number of constraints m = meq + mieq # la = The number of constraints, or 1 if there are no constraints la = array([1,m]).max() # n = The number of independent variables n = len(x) # Define the workspaces for SLSQP n1 = n+1 mineq = m - meq + n1 + n1 len_w = (3*n1+m)*(n1+1)+(n1-meq+1)*(mineq+2) + 2*mineq+(n1+mineq)*(n1-meq) \ + 2*meq + n1 +(n+1)*n/2 + 2*m + 3*n + 3*n1 + 1 len_jw = mineq w = zeros(len_w) jw = zeros(len_jw) # Decompose bounds into xl and xu if len(bounds) == 0: bounds = [(-1.0E12, 1.0E12) for i in range(n)] elif len(bounds) != n: raise IndexError, \ 'SLSQP Error: If bounds is specified, len(bounds) == len(x0)' else: for i in range(len(bounds)): if bounds[i][0] > bounds[i][1]: raise ValueError, \ 'SLSQP Error: lb > ub in bounds[' + str(i) +'] ' + str(bounds[4]) xl = array( [ b[0] for b in bounds ] ) xu = array( [ b[1] for b in bounds ] ) # Initialize the iteration counter and the mode value mode = array(0,int) acc = array(acc,float) majiter = array(iter,int) majiter_prev = 0 # Print the header if iprint >= 2 if iprint >= 2: print "%5s %5s %16s %16s" % ("NIT","FC","OBJFUN","GNORM") while 1: if mode == 0 or mode == 1: # objective and constraint evaluation requird # Compute objective function fx = func(x) # Compute the constraints if f_eqcons: c_eq = f_eqcons(x) else: c_eq = array([ eqcons[i](x) for i in range(meq) ]) if f_ieqcons: c_ieq = f_ieqcons(x) else: c_ieq = array([ ieqcons[i](x) for i in range(len(ieqcons)) ]) # Now combine c_eq and c_ieq into a single matrix if m == 0: # no constraints c = zeros([la]) else: # constraints exist if meq > 0 and mieq == 0: # only equality constraints c = c_eq if meq == 0 and mieq > 0: # only inequality constraints c = c_ieq if meq > 0 and mieq > 0: # both equality and inequality constraints exist c = append(c_eq, c_ieq) if mode == 0 or mode == -1: # gradient evaluation required # Compute the derivatives of the objective function # For some reason SLSQP wants g dimensioned to n+1 g = append(fprime(x),0.0) # Compute the normals of the constraints if fprime_eqcons: a_eq = fprime_eqcons(x) else: a_eq = zeros([meq,n]) for i in range(meq): a_eq[i] = eqcons_prime[i](x) if fprime_ieqcons: a_ieq = fprime_ieqcons(x) else: a_ieq = zeros([mieq,n]) for i in range(mieq): a_ieq[i] = ieqcons_prime[i](x) # Now combine a_eq and a_ieq into a single a matrix if m == 0: # no constraints a = zeros([la,n]) elif meq > 0 and mieq == 0: # only equality constraints a = a_eq elif meq == 0 and mieq > 0: # only inequality constraints a = a_ieq elif meq > 0 and mieq > 0: # both equality and inequality constraints exist a = vstack((a_eq,a_ieq)) a = concatenate((a,zeros([la,1])),1) # Call SLSQP slsqp(m, meq, x, xl, xu, fx, c, g, a, acc, majiter, mode, w, jw) # Print the status of the current iterate if iprint > 2 and the # major iteration has incremented if iprint >= 2 and majiter > majiter_prev: print "%5i %5i % 16.6E % 16.6E" % (majiter,feval[0], fx,linalg.norm(g)) # If exit mode is not -1 or 1, slsqp has completed if abs(mode) != 1: break majiter_prev = int(majiter) # Optimization loop complete. Print status if requested if iprint >= 1: print exit_modes[int(mode)] + " (Exit mode " + str(mode) + ')' print " Current function value:", fx print " Iterations:", majiter print " Function evaluations:", feval[0] print " Gradient evaluations:", geval[0] if not full_output: return x else: return [list(x), float(fx), int(majiter), int(mode), exit_modes[int(mode)] ]

    Read the article

  • wave.getState() returns null

    - by RMorrisey
    When trying to call wave.getState() in my Google Wave gadget, I get back null (no state object). How can I initialize the Wave state object? I am working in the Wave Sandbox. My ModulePrefs contains the following: <Require feature="wave" /> <Require feature="rpc"/> I got the "rpc" feature from some google groups post when searching for a fix, but it doesn't seem to be any help. The gadget contains a jQuery plugin, which defines the classes I use (not shown), attaches an event handler to the link that shows up in edit mode, and sets up the callback methods with the google wave gadget initializer: $.fn.extend({ $.gork.InitPass.newButtonClick = function newButtonClick() { var jer = new $.gork.InitPass.Player('Jeremias', 12, 2); var delta = {}; delta[jer.name] = jer.serialize(); wave.getState().submitDelta(delta); }; $.gork.InitPass.modeCallback = function modeCallback() { var state = wave.getState(); var mode = wave.getMode(); $.gork.InitPass.getContainer().ipCombatState(state, (mode == wave.Mode.EDIT)); }; $.gork.InitPass.stateCallback = function stateCallback() { $.gork.InitPass.getContainer().ipCombatState( wave.getState(), (wave.getMode() == wave.Mode.EDIT)); alert('state'); }; $.gork.InitPass.init = function init() { if (wave && wave.isInWaveContainer()) { var mode = wave.getMode(); $('.gork-ip-container').ipCombatState(null, (mode == wave.Mode.EDIT)); wave.setModeCallback($.gork.InitPass.modeCallback); wave.setStateCallback($.gork.InitPass.stateCallback); } }; })(jQuery); gadgets.util.registerOnLoadHandler($.gork.InitPass.init); $(function ready() { $.gork.InitPass.getContainer().find('.gork-ip-edit .addSection a.newButton').click( $.gork.InitPass.newButtonClick); }); So there are two main pieces of functionality here: When the mode changes, ipCombatState(...) is called. This changes the visual appearance of the gadget when the user puts the gadget in Edit mode (CTRL+E), by hiding the view DIV and displaying the edit DIV. The newButtonClick callback (which is attached to the link "a.newButton" in the edit container) is supposed to add Jeremias (Nate's Shadowrun character) to the gadget state, so that he'll be appear as a table row in edit mode. I have verified that the initializer method is called, and the view/edit mode switch works just fine (except the state is null). When I click on the new button link (the link at the bottom in edit mode), and trigger the newButtonClick handler, I get an error because wave.getState() also returns null. How can I initialize the wave state so that I can work with it? The purpose of my gadget will be to keep track of combat initiative order in a Shadowrun tabletop game (4th Ed). You can test it out in Wave and see what I have so far: http://gorkwobble.herobo.com/wave/init-pass.xml The actual javascript code is externalized to: http://gorkwobble.herobo.com/wave/init-pass.js P.S. If any Shadowrun players read this, and want to hear about it when I get the gadget working, leave a comment and I'll wave you.

    Read the article

  • Why can't I connect to a Cisco wireless access point?

    - by spinlock
    I'm running a Lucid Netbook Remix on my Dell Inspiron 600m and I was not able to connect to the wireless network at the Hacker Dojo in Mountain View yesterday. There were plenty of other people on the network - MS, Mac, and Linux boxes - but my laptop would never get an ip address. I can connect to my home network, which is open, and I've never had a problem connecting at the coffee shop, which uses WPA. The Hacker Dojo is running WPA and we checked the password a number of times but got no love. Any ideas would be greatly appreciated. Additional Info: $iwlist eth1 scan eth1 Scan completed : Cell 01 - Address: EC:C8:82:FA:63:92 ESSID:"HackerDojo-gwifi" Protocol:IEEE 802.11g Mode:Master Frequency:2.412 GHz (Channel 1) Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 9 Mb/s 11 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s 48 Mb/s; 54 Mb/s Quality:62 Signal level:0 Noise level:0 IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : TKIP Authentication Suites (1) : PSK IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK Extra: Last beacon: 280ms ago Cell 02 - Address: 00:18:4D:24:08:61 ESSID:"Green Zone" Protocol:IEEE 802.11bg Mode:Master Frequency:2.417 GHz (Channel 2) Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s 48 Mb/s; 54 Mb/s Quality:23 Signal level:0 Noise level:0 IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : TKIP Authentication Suites (1) : PSK IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK Extra: Last beacon: 11516ms ago Cell 03 - Address: 08:17:35:32:6E:13 ESSID:"\x00" Protocol:IEEE 802.11g Mode:Master Frequency:2.437 GHz (Channel 6) Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 9 Mb/s 11 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s 48 Mb/s; 54 Mb/s Quality:71 Signal level:0 Noise level:0 IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : TKIP Authentication Suites (1) : PSK IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK Extra: Last beacon: 2760ms ago Cell 04 - Address: EC:C8:82:FA:63:90 ESSID:"HackerDojo" Protocol:IEEE 802.11g Mode:Master Frequency:2.412 GHz (Channel 1) Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 9 Mb/s 11 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s 48 Mb/s; 54 Mb/s Quality:61 Signal level:0 Noise level:0 IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : TKIP Authentication Suites (1) : PSK IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK Extra: Last beacon: 772ms ago Cell 05 - Address: 08:17:35:32:6E:11 ESSID:"HackerDojo-Presenter" Protocol:IEEE 802.11g Mode:Master Frequency:2.437 GHz (Channel 6) Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 9 Mb/s 11 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s 48 Mb/s; 54 Mb/s Quality:65 Signal level:0 Noise level:0 IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : TKIP Authentication Suites (1) : PSK IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK Extra: Last beacon: 3308ms ago Cell 06 - Address: 08:17:35:32:7E:31 ESSID:"HackerDojo-Presenter" Protocol:IEEE 802.11g Mode:Master Frequency:2.462 GHz (Channel 11) Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 9 Mb/s 11 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s 48 Mb/s; 54 Mb/s Quality:88 Signal level:0 Noise level:0 IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : TKIP Authentication Suites (1) : PSK IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK Extra: Last beacon: 1668ms ago Cell 07 - Address: 38:E7:D8:01:46:1E ESSID:"JWS_Incredible" Protocol:IEEE 802.11bg Mode:Master Frequency:2.412 GHz (Channel 1) Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 9 Mb/s 11 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s 48 Mb/s; 500 kb/s; 54 Mb/s Quality:31 Signal level:0 Noise level:0 IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : TKIP Authentication Suites (1) : PSK Extra: Last beacon: 2848ms ago Cell 08 - Address: 08:17:35:32:6E:10 ESSID:"HackerDojo" Protocol:IEEE 802.11g Mode:Master Frequency:2.437 GHz (Channel 6) Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 9 Mb/s 11 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s 48 Mb/s; 54 Mb/s Quality:67 Signal level:0 Noise level:0 IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : TKIP Authentication Suites (1) : PSK IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK Extra: Last beacon: 7848ms ago Cell 09 - Address: 08:17:35:32:7E:30 ESSID:"HackerDojo" Protocol:IEEE 802.11g Mode:Master Frequency:2.462 GHz (Channel 11) Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 9 Mb/s 11 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s 48 Mb/s; 54 Mb/s Quality:85 Signal level:0 Noise level:0 IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : TKIP Authentication Suites (1) : PSK IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK Extra: Last beacon: 8300ms ago Cell 10 - Address: 08:17:35:32:6E:12 ESSID:"HackerDojo-gwifi" Protocol:IEEE 802.11g Mode:Master Frequency:2.437 GHz (Channel 6) Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 9 Mb/s 11 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s 48 Mb/s; 54 Mb/s Quality:68 Signal level:0 Noise level:0 IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : TKIP Authentication Suites (1) : PSK IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK Extra: Last beacon: 232ms ago Cell 11 - Address: 08:17:35:32:7E:32 ESSID:"HackerDojo-gwifi" Protocol:IEEE 802.11g Mode:Master Frequency:2.462 GHz (Channel 11) Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 9 Mb/s 11 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s 48 Mb/s; 54 Mb/s Quality:86 Signal level:0 Noise level:0 IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : TKIP Authentication Suites (1) : PSK IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK Extra: Last beacon: 168ms ago Cell 12 - Address: EC:C8:82:FA:63:91 ESSID:"HackerDojo-Presenter" Protocol:IEEE 802.11g Mode:Master Frequency:2.412 GHz (Channel 1) Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 9 Mb/s 11 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s 48 Mb/s; 54 Mb/s Quality:62 Signal level:0 Noise level:0 IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : TKIP Authentication Suites (1) : PSK IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK Extra: Last beacon: 7408ms ago $iwconfig eth1 eth1 unassociated ESSID:"HackerDojo-gwifi" Nickname:"ipw2100" Mode:Managed Channel=0 Access Point: Not-Associated Bit Rate:0 kb/s Tx-Power:16 dBm Retry short limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off Link Quality:0 Signal level:0 Noise level:0 Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0

    Read the article

  • How to build OpenSSL in release mode with symbols?

    - by twk
    I generally build my openssl libs by doing this: perl Configure VC-WIN32 ms\do_masm nmake -f ms\ntdll.mak nmake -f ms\ntdll.mak test For debugging minidumps, I'd like to get a pdb file for the 2 dlls (while still building them in "release" mode). I've added /Zi to the CFLAGS part of ms\ntdll.mak, but I still get "Binary was not built with debug information" when I look at the in-memory modules in the visual studio debugger. Am I missing a step? Thanks

    Read the article

  • Microsoft Silverlight cannot be used in browsers running in 64 bit mode.

    - by JD
    Hi, I have taken ownership of an application which is a .net win forms application which hosts a System.Windows.Forms.WebBrowser. When the application launches it makes a http request to load a xap file. I immediately see "install silverlight" icon and on clicking get: "Microsoft Silverlight cannot be used in browsers running in 64 bit mode". The app was written initially on a 32 bit machine although I have a 64 bit machine. Any ideas what I need to tweak to get this running? JD

    Read the article

  • Why am I losing sessions when running in StateServer mode?

    - by Nick Allen - Tungle139
    I have checked the servers (Win Server 2003) application event logs for the following problem http://support.microsoft.com/kb/308097 which doesn't show up. It just appears that sessions drop randomly for random users It's a single server setup, no web farms and no load balancing Even though the issue I point to above doesn't occur in the logs, is it worth increasing the stateNetworkTimeout attribute anyway? The configuration at the moment is simply <sessionState mode="StateServer" cookieless="false" stateConnectionString="tcpip=localhost:42424" timeout="60"/>

    Read the article

< Previous Page | 54 55 56 57 58 59 60 61 62 63 64 65  | Next Page >