Search Results

Search found 11524 results on 461 pages for 'insurance networking news'.

Page 58/461 | < Previous Page | 54 55 56 57 58 59 60 61 62 63 64 65  | Next Page >

• How to share internet connection and making the client accessible over the lan

  - by Dario Silva Moran

  I've a Pc with Ubuntu 14.04 connected to a linkys router through wlan0, and I'd like to share internet connection to an AVR with ethernet port. This is pretty simple if only internet connection is required for the AVR: actually, creating an ethernet connection as "Shared with other computers" and setting up the AVR IP configuration to use DHCP works just fine, but that makes a private class A lan between those two; of course ip addresses are not in the range of the LAN the router is managing. So, I tried with static ip on both sides (Ubuntu eth0 and AVR ip). Tried many combinations, none of them work to provide Internet access to the AVR and at the same time make the AVR accessible over the network through his static ip address (say, 192.168.0.110). Any tips around to share??

  Read the article

• Cannot connect to secure wireless with Netgear wna3100 USB

  - by Vince Radice

  I have installed Ubuntu 11.10. I used a wired connection to download and install all of the updates. When I tried to use a Netgear WNA3100 wireless USB network adapter, it failed. Much searching and trying things I was finally able to get it working by disabling security on my router. I have verified this by disabling security and I was able to connect. When I enabled security (WPA2 PSK), the connection failed. What is necessary to enable security (WPA2 PSK) and still use the Netgear USB interface? Here is the output from the commands most requested lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 003: ID 0846:9020 NetGear, Inc. WNA3100(v1) Wireless-N 300 [Broadcom BCM43231] lshw -C network *-network description: Ethernet interface product: RTL-8139/8139C/8139C+ vendor: Realtek Semiconductor Co., Ltd. physical id: 3 bus info: pci@0000:02:03.0 logical name: eth0 version: 10 serial: 00:40:ca:44:e6:3e size: 10Mbit/s capacity: 100Mbit/s width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=8139too driverversion=0.9.28 duplex=half latency=32 link=no maxlatency=64 mingnt=32 multicast=yes port=MII speed=10Mbit/s resources: irq:19 ioport:c800(size=256) memory:ee011000-ee0110ff memory:40000000-4000ffff *-network description: Wireless interface physical id: 1 logical name: wlan0 serial: e0:91:f5:56:e1:0d capabilities: ethernet physical wireless configuration: broadcast=yes driver=ndiswrapper+bcmn43xx32 driverversion=1.56+,08/26/2009, 5.10.79.30 ip=192.168.1.104 link=yes multicast=yes wireless=IEEE 802.11g iwconfig lo no wireless extensions. eth0 no wireless extensions. wlan0 IEEE 802.11g ESSID:"vincecarolradice" Mode:Managed Frequency:2.422 GHz Access Point: A0:21:B7:9F:E5:EE Bit Rate=121.5 Mb/s Tx-Power:32 dBm RTS thr:2347 B Fragment thr:2346 B Encryption key:off Power Management:off Link Quality:76/100 Signal level:-47 dBm Noise level:-96 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 ndiswrapper -l bcmn43xx32 : driver installed device (0846:9020) present lsmod | grep ndis ndiswrapper 193669 0 dmesg | grep -e ndis -e wlan [ 907.466392] ndiswrapper version 1.56 loaded (smp=yes, preempt=no) [ 907.838507] ndiswrapper (import:233): unknown symbol: ntoskrnl.exe:'IoUnregisterPlugPlayNotification' [ 907.838955] ndiswrapper: driver bcmwlhigh5 (Netgear,11/05/2009, 5.60.180.11) loaded [ 908.137940] wlan0: ethernet device e0:91:f5:56:e1:0d using NDIS driver: bcmwlhigh5, version: 0x53cb40b, NDIS version: 0x501, vendor: 'NDIS Network Adapter', 0846:9020.F.conf [ 908.141879] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK [ 908.143048] usbcore: registered new interface driver ndiswrapper [ 908.178826] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 994.015088] usbcore: deregistering interface driver ndiswrapper [ 994.028892] ndiswrapper: device wlan0 removed [ 994.080558] ndiswrapper version 1.56 loaded (smp=yes, preempt=no) [ 994.374929] ndiswrapper: driver bcmn43xx32 (,08/26/2009, 5.10.79.30) loaded [ 994.404366] ndiswrapper (mp_init:219): couldn't initialize device: C0000001 [ 994.404384] ndiswrapper (pnp_start_device:435): Windows driver couldn't initialize the device (C0000001) [ 994.404666] ndiswrapper (mp_halt:262): device e05b6480 is not initialized - not halting [ 994.404671] ndiswrapper: device eth%d removed [ 994.404709] ndiswrapper: probe of 1-5:1.0 failed with error -22 [ 994.406318] usbcore: registered new interface driver ndiswrapper [ 2302.058692] wlan0: ethernet device e0:91:f5:56:e1:0d using NDIS driver: bcmn43xx32, version: 0x50a4f1e, NDIS version: 0x501, vendor: 'NDIS Network Adapter', 0846:9020.F.conf [ 2302.060882] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK [ 2302.113838] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 2354.611318] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 2355.268902] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 2365.400023] wlan0: no IPv6 routers present [ 2779.226096] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 2779.422343] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 2797.574474] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 2802.607937] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 2803.261315] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 2813.952028] wlan0: no IPv6 routers present [ 3135.738431] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 3139.180963] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3139.816561] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3163.229872] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3163.444542] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3163.758297] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3163.860684] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3205.118732] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3205.139553] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3205.300542] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3353.341402] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 3363.266399] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3363.505475] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3363.506619] ndiswrapper (set_iw_auth_mode:601): setting auth mode to 5 failed (00010003) [ 3363.717203] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3363.779206] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3405.206152] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3405.248624] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3405.577664] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3438.852457] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 3438.908573] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3568.282995] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3568.325237] ndiswrapper (set_iw_auth_mode:601): setting auth mode to 5 failed (00010003) [ 3568.460716] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3568.461763] ndiswrapper (set_iw_auth_mode:601): setting auth mode to 5 failed (00010003) [ 3568.809776] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3568.880641] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3610.122848] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3610.148328] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3610.324502] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3636.088798] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 3636.712186] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 3647.600040] wlan0: no IPv6 routers present I am using the system now with the router security turned off. When I submit this, I will turn security back on.

  Read the article

• Can't connect to VPN on Ubuntu 12.04

  - by 12rad

  I'm having a lot of trouble connecting to VPN. This used to work on my machine, but i recently did an update and it's stopped working. I'm not sure what the problem is. My question is how do i debug this? I'm not able to narrow it down to a specific problem. This is what i get when i tail the syslogs. Would appreciate any help! Nov 6 23:42:52 meera NetworkManager[1137]: <info> Starting VPN service 'pptp'... Nov 6 23:42:52 meera NetworkManager[1137]: <info> VPN service 'pptp' started (org.freedesktop.NetworkManager.pptp), PID 6132 Nov 6 23:42:52 meera NetworkManager[1137]: <info> VPN service 'pptp' appeared; activating connections Nov 6 23:42:52 meera NetworkManager[1137]: <info> VPN plugin state changed: starting (3) Nov 6 23:42:52 meera NetworkManager[1137]: <info> VPN connection 'NAME VPN' (Connect) reply received. Nov 6 23:42:52 meera pppd[6136]: Plugin /usr/lib/pppd/2.4.5/nm-pptp-pppd-plugin.so loaded. Nov 6 23:42:52 meera pppd[6136]: pppd 2.4.5 started by root, uid 0 Nov 6 23:42:52 meera chat[6139]: timeout set to 15 seconds Nov 6 23:42:52 meera chat[6139]: abort on (NO CARRIER) Nov 6 23:42:52 meera chat[6139]: abort on (NO DIALTONE) Nov 6 23:42:52 meera chat[6139]: abort on (ERROR) Nov 6 23:42:52 meera chat[6139]: abort on (NO ANSWER) Nov 6 23:42:52 meera chat[6139]: abort on (BUSY) Nov 6 23:42:52 meera chat[6139]: abort on (Username/Password Incorrect) Nov 6 23:42:52 meera chat[6139]: send (AT^M) Nov 6 23:42:52 meera pptp[6138]: nm-pptp-service-6132 log[main:pptp.c:314]: The synchronous pptp option is NOT activated Nov 6 23:42:52 meera chat[6139]: expect (OK) Nov 6 23:42:52 meera pptp[6143]: nm-pptp-service-6132 log[ctrlp_rep:pptp_ctrl.c:251]: Sent control packet type is 1 'Start-Control-Connection-Request' Nov 6 23:42:53 meera pptp[6143]: nm-pptp-service-6132 log[ctrlp_disp:pptp_ctrl.c:739]: Received Start Control Connection Reply Nov 6 23:42:53 meera pptp[6143]: nm-pptp-service-6132 log[ctrlp_disp:pptp_ctrl.c:773]: Client connection established. Nov 6 23:42:53 meera pptp[6143]: nm-pptp-service-6132 log[ctrlp_rep:pptp_ctrl.c:251]: Sent control packet type is 7 'Outgoing-Call-Request' Nov 6 23:42:54 meera pptp[6143]: nm-pptp-service-6132 log[ctrlp_disp:pptp_ctrl.c:858]: Received Outgoing Call Reply. Nov 6 23:42:54 meera pptp[6143]: nm-pptp-service-6132 log[ctrlp_disp:pptp_ctrl.c:897]: Outgoing call established (call ID 0, peer's call ID 13077). Nov 6 23:42:54 meera pptp[6138]: nm-pptp-service-6132 warn[decaps_hdlc:pptp_gre.c:231]: The ppp mode is synchronous, yet no pptp --sync option is specified! Nov 6 23:43:07 meera chat[6139]: alarm Nov 6 23:43:07 meera chat[6139]: Failed Nov 6 23:43:07 meera pppd[6136]: Script chat -v -f /etc/ppp/chat-ztisp finished (pid 6139), status = 0x3 Nov 6 23:43:07 meera pppd[6136]: Connect script failed Nov 6 23:43:07 meera pppd[6136]: Waiting for 1 child processes... Nov 6 23:43:07 meera pppd[6136]: script /usr/sbin/pptp 204.197.218.90 --nolaunchpppd --loglevel 0 --logstring nm-pptp-service-6132, pid 6138 Nov 6 23:43:07 meera pptp[6138]: nm-pptp-service-6132 warn[decaps_hdlc:pptp_gre.c:204]: short read (-1): Input/output error Nov 6 23:43:07 meera pptp[6138]: nm-pptp-service-6132 warn[decaps_hdlc:pptp_gre.c:216]: pppd may have shutdown, see pppd log Nov 6 23:43:07 meera pptp[6143]: nm-pptp-service-6132 log[callmgr_main:pptp_callmgr.c:234]: Closing connection (unhandled) Nov 6 23:43:07 meera pppd[6136]: Script /usr/sbin/pptp 204.197.218.90 --nolaunchpppd --loglevel 0 --logstring nm-pptp-service-6132 finished (pid 6138), status = 0x0 Nov 6 23:43:07 meera pptp[6143]: nm-pptp-service-6132 log[ctrlp_rep:pptp_ctrl.c:251]: Sent control packet type is 12 'Call-Clear-Request' Nov 6 23:43:07 meera pptp[6143]: nm-pptp-service-6132 log[call_callback:pptp_callmgr.c:79]: Closing connection (call state) Nov 6 23:43:07 meera pppd[6136]: Exit. Nov 6 23:43:07 meera NetworkManager[1137]: <warn> VPN plugin failed: 1 Nov 6 23:43:07 meera NetworkManager[1137]: <info> VPN plugin state changed: stopped (6) Nov 6 23:43:07 meera NetworkManager[1137]: <info> VPN plugin state change reason: 0 Nov 6 23:43:07 meera NetworkManager[1137]: <warn> error disconnecting VPN: Could not process the request because no VPN connection was active.

  Read the article

• Wireless not detected on an hp Pavilion g6

  - by Earl Larson

  I just bought an HP Pavilion g6 laptop and I installed Natty Narwhal alongside Windows 7. In Windows 7, my WiFi works perfect but in Ubuntu it absolutely (no matter what I do) won't detect my home WiFi network. Here is the output of "lspci": earl@ubuntu:~$ lspci 00:00.0 Host bridge: Advanced Micro Devices [AMD] RS880 Host Bridge 00:01.0 PCI bridge: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (int gfx) 00:04.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 0) 00:05.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 1) 00:06.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 2) 00:11.0 SATA controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] 00:12.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:12.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:13.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:13.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 42) 00:14.1 IDE interface: ATI Technologies Inc SB7x0/SB8x0/SB9x0 IDE Controller (rev 40) 00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) (rev 40) 00:14.3 ISA bridge: ATI Technologies Inc SB7x0/SB8x0/SB9x0 LPC host controller (rev 40) 00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge (rev 40) 00:14.5 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI2 Controller 00:16.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:16.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control 00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Link Control 01:05.0 VGA compatible controller: ATI Technologies Inc M880G [Mobility Radeon HD 4200] 01:05.1 Audio device: ATI Technologies Inc RS880 Audio Device [Radeon HD 4200] 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05) 03:00.0 Network controller: Ralink corp. Device 5390 04:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device 5209 (rev 01) earl@ubuntu:~$

  Read the article

• Suspending my laptop breaks ethernet over firewire, are there commands which can fix it?

  - by Josh

  As mentioned in this question I am using a firewire cable to provide a private network between my laptop and my desktop, because it makes using the screen sharing program synergy much nicer than using WIFI. However when I leave my office for the day and I suspend my laptop, when I return the next day, the desktop and the laptop cannot communicate over firewire anymore. The firewire0 device still has an IP address. but when I try and ping the desktop I get no route to host I'm using kernel 2.6.35-24-generic #42-Ubuntu SMP x86_64 on Ubuntu 10.10. Is there some way I can remedy this without a reboot? Like, removing some kernel modules and re-inserting them? Here's what I have tried so far and the results: root@token:~# dmesg|tail -n 1 [592525.204024] firewire_core: phy config: card 0, new root=ffc1, gap_count=5 root@token:~# modprobe -r firewire_net firewire_ohci firewire_core root@token:~# modprobe -v firewire_ohci insmod /lib/modules/2.6.35-24-generic/kernel/lib/crc-itu-t.ko insmod /lib/modules/2.6.35-24-generic/kernel/drivers/firewire/firewire-core.ko insmod /lib/modules/2.6.35-24-generic/kernel/drivers/firewire/firewire-ohci.ko root@token:~# dmesg|tail [592525.204024] firewire_core: phy config: card 0, new root=ffc1, gap_count=5 [592563.410868] firewire_ohci: Removed fw-ohci device. [592579.160086] firewire_ohci: Added fw-ohci device 0000:02:00.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2 [592579.160137] firewire_ohci: isochronous cycle inconsistent [592579.660294] firewire_core: created device fw0: GUID 0000000000000000, S400 [592579.663805] firewire_core: created device fw1: GUID 0017f2fffe89bce6, S400 [592579.663813] firewire_core: phy config: card 0, new root=ffc1, gap_count=5 [592579.700720] firewire_core: phy config: card 0, new root=ffc1, gap_count=5 [592579.700842] firewire_core: refreshed device fw0 [592579.702603] firewire_net: firewire0: IPv4 over FireWire on device 0000000000000000 root@token:~# ping stan.firewire PING stan.firewire (192.168.100.1) 56(84) bytes of data. From token.local (192.168.100.3) icmp_seq=1 Destination Host Unreachable From token.local (192.168.100.3) icmp_seq=2 Destination Host Unreachable From token.local (192.168.100.3) icmp_seq=3 Destination Host Unreachable I also tried removing the modules prior to suspending, and re-inserting after resuming. This did not work either :-(

  Read the article

• Nice network diagram editor?

  - by Nicolas Raoul

  Writing a commercial proposal, I want to create a nice graphic showing the clients the architecture I thought of for their IT network, with servers, network connections, firewall, load-balancing, etc. For years I have been using dia, but I am tired of it because: the results are not satisfying, very few network elements are available, and each element's graphic representation is really ugly. Question: How to create nice network diagrams? If a better set of elements was available for dia, that would be a solution.

  Read the article

• How to allow remote connections to Flask?

  - by Ilya Smagin

  Inside the system, running on virtual machine, I can access the running server at 127.0.0.1:5000. Although the 'remote' address of the vm is 192.168.56.101 (ping and ssh work fine), I cannot access the server with 192.168.50.101:5000 neither from the virtual machine nor from the local one. I guess there's something preventing remote connections. Here's /etc/network/interfaces: auto eth1 iface eth1 inet static address 192.168.56.101 netmask 255.255.255.0 ufw is inactive. How do I fix this problem?

  Read the article

• Unable to set default gateway

  - by GrandMasterFlush

  I'm running Ubuntu server via Hyper-V and have successfully installed it but seem unable to ping the server or ping any other machines on the network from the server. After doing a bit of reading I've noticed that the default gateway isn't set but when I try and set it I keep getting error messages which I can't understand. From this article I've tried ip route add default via 10.0.10.200 Which reports: RTNETLINK answers: Operation not permitted If I try running it prefixed with sudo but it reports: `RNETLINK answers: No such process I've editted /etc/network/interfaces but when I start the machine and type netstat -nr there is nothing listed. Can anyone tell me where I'm going wrong please? EDIT : /etc/network/interfaces contains: auto lo iface lo inet loopback auto eth0 iface eth0 inet dhcp

  Read the article

• Sharing internet to Ubuntu 12.04 VMWare guest

  - by John Cogan

  Got the 12.04 distro and installed this on my Mac VMWare Fusion (Version 4.1.2). Install went fine and Ubuntu seemed to update itself during the install. Rebooted and now I cannot get Ubuntu to access the internet via my Macs Ethernet connection (Connected to a router) Have tried settings the VMWare network adaptor to NAT or bridged and Host only without success. In Ubuntu I have the eth0 set to Automatic DHCP. VMWare tools is installed as well. I know next to nothing about what to do here and net searches on both Stackoverflow and Superuser sites are producing not results for me. Could someone please help? What to eventually have Ubuntu run in the background as a development web server running Zend Framework and CE Server edition but need thew internet access to run updates etc on Ubuntu. Any help would be really appreciated. TIA John

  Read the article

• Pluscom MAC address shows up but "wireless unavailable"

  - by Luigi

  I've got a pluscom pci card plugged into my desktop and although the mac address shows up in network manager, it says "Wireless unavailable". I'm using Ubuntu 12.10 Gnome Shell Remix... edgar@edgarQuantal:~$ iwconfig eth0 no wireless extensions. lo no wireless extensions. wlan0 IEEE 802.11bg ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=0 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off edgar@edgarQuantal:~$ ifconfig eth0 Link encap:Ethernet HWaddr 6c:f0:49:02:1f:b8 inet addr:192.168.0.7 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::6ef0:49ff:fe02:1fb8/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1425 errors:0 dropped:0 overruns:0 frame:0 TX packets:1393 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:995753 (995.7 KB) TX bytes:134079 (134.0 KB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:363 errors:0 dropped:0 overruns:0 frame:0 TX packets:363 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:40828 (40.8 KB) TX bytes:40828 (40.8 KB) It looks the same as the problem as here, seems quite complicated: http://ubuntuforums.org/showthread.php?t=1993226 Tried downloading the driver but i get this: "Unpacking firmware-ralink (from .../firmware-ralink_0.36_all.deb) ... dpkg: error processing /home/edgar/Downloads/firmware-ralink_0.36_all.deb (--install): trying to overwrite '/lib/firmware/rt2870.bin', which is also in package linux-firmware 1.95"

  Read the article

• Best way to cache apt downloads on a LAN?

  - by Ken Simon

  I have multiple Ubuntu machines at home and a pretty slow internet connection, and sometimes multiple machines need to be updated at once (especially during new Ubuntu releases.) Is there a way where only one of my machines needs to download the packages, and the other machines can use the first machine to get the debs? Does it involve setting up my own local mirror? Or a proxy server? Or can it be made simpler?

  Read the article

• Can't load some domain

  - by Grzegorz

  I can't load some domain on my ubuntu 13.04: youtube.com translate.google.com drive.google.com vk.com When I ping them they are responding: PING youtube.com (217.119.79.59) 56(84) bytes of data. 64 bytes from non-registered.plix.pl (217.119.79.59): icmp_req=1 ttl=59 time=21.9 ms 64 bytes from non-registered.plix.pl (217.119.79.59): icmp_req=2 ttl=59 time=20.5 ms 64 bytes from non-registered.plix.pl (217.119.79.59): icmp_req=3 ttl=59 time=21.3 ms --- youtube.com ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 2002ms rtt min/avg/max/mdev = 20.544/21.255/21.914/0.560 ms But they don't load in any browser like firefox, chrome, lynx. They load in my media centre on XBMCbuntu.

  Read the article

• Log incoming requests

  - by Maxim Eliseev

  We have Tomcat running on Ubuntu server. It runs a web service, open to the internet. Sometimes it has sudden spike of traffic and goes down. There is nothing unusual in Tomcat access logs. I guess because some of the requests are so 'heavy' that they never finish and hence are not recorded to Tomcat access logs. Is there a way to configure Ubuntu to log incoming requests in the following format (below)? Date, Time, URL (with query string params), IP address (of client) There should be one line per request. Each request should be logged before it is executed. Only incoming requests to ports 80 and 443 should be logged.

  Read the article

• Can not connect to wireless on 12.04 with Intel WiFi Link 5100

  - by WiData

  I am having problem in connecting to wifi. I have dual boot (Windows 7 and Ubuntu 12.04) on my Dell Studio 15. I upgraded to 12.04 quite some time ago (at least one month) from 11.10. Everything was working fine till yesterday. Since yesterday I can see the list of available Wifi connection but does not connect to any or if connects (after hours of trying) then disconnects after few minutes. My wifi interface is Intel WiFi Link 5100 AGN. However the problem is on both Windows and Ubuntu. Here are outputs of some commands which may be useful for those interested in helping: ~$ ifconfig eth0 Link encap:Ethernet HWaddr 00:22:19:fa:65:bb UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:17 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:794 errors:0 dropped:0 overruns:0 frame:0 TX packets:794 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:56280 (56.2 KB) TX bytes:56280 (56.2 KB) wlan0 Link encap:Ethernet HWaddr 00:22:fb:d2:fc:ce UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:239 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:53603 (53.6 KB) Here is the output for the command sudo lshw -C network *-network description: Wireless interface product: WiFi Link 5100 vendor: Intel Corporation physical id: 0 bus info: pci@0000:04:00.0 logical name: wlan0 version: 00 serial: 00:22:fb:d2:fc:ce width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlwifi driverversion=3.2.0-48-generic-pae firmware=8.83.5.1 build 33692 latency=0 link=no multicast=yes wireless=IEEE 802.11abgn resources: irq:47 memory:f8000000-f8001fff My kernel version is kernel version 3.2.0-48-generic-pae I also checked this post which was helpful. But I am not sure if what is the exact problem. Any suggestions will be helpful. Should I be changing the firmware/driver? Currently my /lib/firmware has following iwlwifi files /lib/firmware/iwlwifi-1000-5.ucode /lib/firmware/iwlwifi-5000-5.ucode /lib/firmware/iwlwifi-100-5.ucode /lib/firmware/iwlwifi-5150-2.ucode /lib/firmware/iwlwifi-105-6.ucode /lib/firmware/iwlwifi-6000-4.ucode /lib/firmware/iwlwifi-135-6.ucode /lib/firmware/iwlwifi-6000g2a-5.ucode /lib/firmware/iwlwifi-2000-6.ucode /lib/firmware/iwlwifi-6000g2a-6.ucode /lib/firmware/iwlwifi-2030-6.ucode /lib/firmware/iwlwifi-6000g2b-6.ucode /lib/firmware/iwlwifi-3945-2.ucode /lib/firmware/iwlwifi-6050-5.ucode /lib/firmware/iwlwifi-4965-2.ucode Thanks a lot for the help.

  Read the article

• How to send packets via a pptp vpn tunnel?

  - by Phill

  I'm trying to send certain port traffic through my ppp0 interface it's a pptp vpn tunnel, First, I'm using a wireless usb interface, I connect up to my access point, then I initiate my vpn, there is a connection but I do not channel all connexions through that, nor do I want to, so, say I want to channel all port 80 packets through my vpn (interface dev ppp0). I first run: iptables -t mangle -A OUTPUT -p tcp --dport 80 -j MARK --set-mark 0xa to mark the correct packets then I add a table named vpn_table, I then add ip route add default dev ppp0 table vpn_table when I do that traffic begins to dribble through the ppp0, but no pages load. I supose I must have caused some sort of coflict, or the route I'm adding in vpn_table isn't quite right. I'm not sure, I think I'm marking the packets correctly but I can't be sure of that either. UPDATE: I think i've got part of the issue solved: running tcpdump -i ppp0 showed me that indeed there was outgoing requests via ppp0, now, there is never a response, and pages do not load with using that interface..i'm still missing something.

  Read the article

• How do I get network working on a Dell n5010 - Ubuntu 10.04

  - by cyberroger

  Hey. I just formatted a Dell n5010 and installed Ubuntu 10.04. Now,when i try to access the Internet it doesn't find the available networks. Informations about it: My network is set to broadcast SSID; Already typed lspci, and it doesnt returns my wireless card; Tried installing windows drivers from fabricant cd usind diswrapper, but it says it cant complete the installation because it cant find some "Device" folder; I don't know what else to do, I switch the wireless button on/off and it just can't see any wireless connection, includin mine. Here are the informations about lspci: *-network UNCLAIMED description: Network controller product: Broadcom Corporation vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:12:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:fbc00000-fbc03fff And this: 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 18) 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18) 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) 00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06) 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 06) 00:1c.2 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 (rev 06) 00:1c.4 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 (rev 06) 00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a6) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 06) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller (rev 06) 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 06) 00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 06) 12:00.0 Network controller: Broadcom Corporation Device 4727 (rev 01) 13:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02) Thanks!

  Read the article

• IPSec Offload support in 82576GB controller for Linux

  - by Rodrigo Leal

  Due to migration of servers to cloud computing, we bought several NICs that support mechanisms like SRIOV and VMDQ. Furthermore, as security risk was also a concern and we did not want to create more overhead on the processor, IPSec Offload support was essential. The model chosen was: Intel Gigabit ET2 Quad Port Svr Adptr. (With 82576GB controller): http://ark.intel.com/products/49187/intel-gigabit-et2-quad-port-server-adapter However, we were unable to configure IPSec Offload on Linux. We tried to test on another server we have, a Windows Server 2012 R2, but again without success. It seems that the driver for this controller is not available for windows server 2012 R2, and Linux. The test on windows would be only for verification purposes, we will not use this platform. Could someone confirm this lack of support for Linux?

  Read the article

• What is needed for a networked home printer?

  - by Jay

  I've seen this question: Home network printer recommendations but I think I'm asking something more basic. I'm not really familiar with networked printers or how they work or what they do really. What I'd like is to have a printer that is accessible to anyone connected to my home network, without having to plug into the printer itself. An alternative setup might to be to have a printer that is always hooked up to one computer, like a desktop, that is almost always on and allows other computers connected on the network to print to it as well. I believe the first option is called a networked printer and the second is printer sharing. But again I'm new to this so I don't really know the details or if I'm using the correct terminology. I was wondering if someone might be able to shed some light on this and let me know what is needed for either of these setup. Thanks.

  Read the article

• Ubuntu Server 12.04 as a router. Problem with DNS

  - by Lorenzo

  I have a virtualbox lab made up of 4 Windows 2008 R2 servers (DC/DNS,SQL,SHAREPOINT, EXCHANGE) that are configured with static ip addresses with NIC's attached to Internal network. Everything works. I had the requirement to execute some tests that also access external services available on the internet. To keep things clean and similar to the production environment I have installed another VM, with Ubuntu Server 12.04 64 bit and configured (I hope) to work as a router like described on this post. This VM has two network interfaces: first is Bridged with the host and is used as a WAN connection and the other one attached in the Internal Network with its own static IP address on the internal network subnet. But actually the Windows servers does not connect to the internet while the unix one connects. I did a route command. this is the result: Kernel IP Routing table Destination Gateway Genmask Flags Metric Ref Use Iface default 10.69.121.1 0.0.0.0 UG 100 0 0 eth0 10.69.121.0 * 255.255.255.0 U 0 0 0 eth0 192.168.83.0 * 255.255.255.0 U 0 0 0 eth1 Can somebody help me with this configuration? :) Thanks! Addendum: I forgot to mention that one of the windows server hosts a DNS service for which I should maybe configure a forwarding server but I do not exactly know which server to forward on... :(

  Read the article

• Slow DNS Resolution

  - by user4541

  After a clean install of 10.10 I'm finding DNS resolution takes quite a long time. Hitting any url takes a good few seconds (10 - 30) before the site is displayed. I'm thinking this is a DNS resolution issue due to the 'waiting' or 'looking up' text being displayed in Firefox and Chrome. I do not get this issue with Slackware Linux or Windows 7 so it is not network or DNS server specific issue. It's something on the client side. Looking around on Google I see there are a few other people with this issue. The ones that have reported a workaround by switching to openDNS are disabling IPV6 or dealing with another issue. Any help would be appreciated. My network card is wired: Broadcom Corporation NetLink BCM5906M Fast Ethernet PCI Express Thanks

  Read the article

• Secure login for a game that is open source

  - by David Park

  I am making a game which i will be open sourcing. Its a simple arcade like game but requires a network connection because it is meant to be played with other people. The thing i am worrying about is how would i be sure that the client is the one that i put out for the end user to play with? Kind of a like of sv_pure for Team Fortress 2. I was thinking of different ways to combat this such as the server requesting the client's version or even it's md5 hash but people with simple java knowledge could just force a method to always return what the server wants.

  Read the article

• DSL modem problem in 11.10

  - by Misterious

  Earlier I used Windows 7 and the modem used to work absolutely fine. Even when it got disconnected it used to reconnect automatically without any trouble. But then I installed Ubuntu 11.10 on dual-boot and set up the modem connection properly but the modem now disconnects much more frequently (earlier it disconnected once in 5 hours or so and after Ubuntu in 5 minutes!). Also once disconnected, it does not reconnect even when I have checked the "Connect Automatically" button. I have to restart the system to reconnect it. I the clean installed Windows and modem works perfectly fine again. What is the reason for this and how can I solve this? I really want to use Ubuntu but due to this problem I can't.

  Read the article

• Can not access Internet (DNS names do not resolve) after update today

  - by Aras

  I have been using Precise for a few weeks now for work with no problem. Today, I am not able to access any website using either wired or wireless connections. I installed the updates today which included nautilus, xserver, and a new kernel (3.2.0-24). After restarting I no longer was able to browse the Internet using firefox or chrome. Trying to ping google in terminal gives ping: unknown host google.ca I have tried: Connecting to wireless or wired networks (both working on other machines) Restart the machine and boot with previous Kernel Manually configure opendns on my wired connection Restart the network and the laptop and the wireless card Without any success so far. I am not sure where to go next. Please let me know the cause of the issue or help me troubleshoot it. Note that the laptop does receive an ip address, and it can ping ip address of google.ca (74.125.127.94) but not the domain name, or any domain name for that matter. This system was upgraded from 11.10 to 12.04 more two weeks ago.

  Read the article

• alternative to environment variables

  - by tonyl7126

  The amount of servers and the complexity of our application is growing and we now have servers in different regions (hosted on AWS). Certain database operations require low latency so we have stuck a database in each region (which is basically a user cache) to keep the network latency low. The way the application server currently knows which user cache/database to make its call to depends on an environemnt variable set in it. This has been working fine, but it seems hacky and not optimal. Is there any way for this to be done automatically? I was considering using a package like fping and pinging each database when the app server reloads (or caching it the first time) and using the corresponding latencies to decide which database has the lowest latency for each app server. Not sure if this is the best idea though.

  Read the article

• How can I access the scanner functionality of my Samsung CLX 3175N over the network?

  - by Roger De Backer

  I have a Samsung CLX 3175N network capable color laser printer/scanner which was sold as being Linux compatible. Whereas the printer undeed works in the network. It has been impossible up to now to get the scanner working under Ubuntu (safe for using Windows XP running in Virtualbox on the Ubuntu client), but that is not my understanding of Linux compatibility. Is there anybody who knows a method to access a network Scanner in Ubuntu?

  Read the article

< Previous Page | 54 55 56 57 58 59 60 61 62 63 64 65  | Next Page >