Search Results

Search found 56300 results on 2252 pages for 'local working'.

Page 58/2252 | < Previous Page | 54 55 56 57 58 59 60 61 62 63 64 65  | Next Page >

• Broadcom BCM4313 working, but terribly slow

  - by Ataraxio Panzetta

  Hi all, I've installed ubuntu on a Asus 1015 netbook. Everything worked out of the box except for the Wireless adapter, which i had to install with the Additional Drivers application. It apparently installed fine and connects to our wireless network, but it only works at a "funny" speed range that goes from 367Bytes to a peak of 3Kb in its best moments. I know for sure the problem is neither the network nor the hardware. Network speeds are normal under windows on this laptop and in other computers with ubuntu aswell. lspci says the card is a BCM4313 model, but the Addittional Drivers Manager says these packecege contains Broadcom 802.11 Linux STA wireless driverfor use with Broadcom's BCM4311-, BCM4312-, BCM4321-, and BCM4322 based hardware seems like it installed the wrong driver... Is there anything I can do? I'm not concerned about compiling the driver or stuff like that, but I'm not sure on where to start... any help or guidance will be very, very appreciated.

  Read the article

• Display brightness adjustment not working

  - by nibot

  I have Ubuntu 11.04 installed on a Lenovo Thinkpad T410 laptop with nVidia GT218 display controller. I am unable to adjust the display brightness. Pressing Fn-Home and Fn-End brings up the display brightness on-screen display and the indicated level increases or decreases as it should. But the actual display brightness does not change. Earlier I was able to Ctrl-Alt-F1 over to a text terminal and then do Fn-Home / Fn-End to successfully change the display brightness, and then Ctrl-Alt-F8 back to the Gnome session with the new brightness. But after upgrading to 11.04 the psuedoterminals have disappeared.

  Read the article

• Working for international NGO's as a programmer

  - by Keyslinger

  I have begun a career as a web application and database developer while slowly discovering the passion I have for work in the international development sector. Since this is not the most obvious line of work for someone with my credentials, it seems to me that special care must be taken in order to court international non-governmental organisations (NGOs) and position myself in the field. Aside from adding grant-writing to my skill set and getting volunteer experience, what indispensable advice do you have for a fledgling programmer who wants to save the world?

  Read the article

• Volume control keyboard shortcuts not working in 14.04?

  - by user295481

  I run Ubuntu 14.04 on a Sony Vaio CS series laptop. Normally, the volume is controlled by pressing Funcion+F2, F3, and F4 for mute, volume down, and volume up respectively. I accidentally reassigned the volume up keyboard shortcut to a different key. I tried resetting the keyboard shortcut by going into the keyboard shortcuts editor in Ubuntu and pressing Function+F4, but that didn't work. My mute function and my volume down functions both work flawlessly, but volume up doesn't work at all. Please don't answer telling me to change the keyboard shortcut in the Keyboard Shortcuts manager, as I have already tried that. Thanks for your help!

  Read the article

• NHibernate Tutorial #5 - Working with Many to Many relationships

  - by BobPalmer

  After a short break last week, I wanted to make sure I made time to publish the next in my series of tutorials on NHibernate. This week I'll be covering Many to Many relationships, the hilo algorithm, IdBag element, and touch on Lazy Loading. You can view the entire article at this link: http://docs.google.com/Doc?docid=0AUP-rKyyUMKhZGczejdxeHZfMjZkdjd3cjJnMg&hl=en As always, feedback and any technical bits I may have missed are always appreciated! -Bob Palmer

  Read the article

• Ubuntu 12.04.1 LTS -touch pad scroll for asus-k55v not working

  - by Aks

  have tried all the commands over terminal but still could bot fix it, for xinput i got Virtual core pointer id=2 [master pointer (3)] ? ? Virtual core XTEST pointer id=4 [slave pointer (2)] ? ? MOSART Semi. 2.4G Keyboard Mouse id=11 [slave pointer (2)] ? ? PS/2 Generic Mouse id=15 [slave pointer (2)] ? Virtual core keyboard id=3 [master keyboard (2)] ? Virtual core XTEST keyboard id=5 [slave keyboard (3)] ? Power Button id=6 [slave keyboard (3)] ? Video Bus id=7 [slave keyboard (3)] ? Video Bus id=8 [slave keyboard (3)] ? Sleep Button id=9 [slave keyboard (3)] ? MOSART Semi. 2.4G Keyboard Mouse id=10 [slave keyboard (3)] ? USB 2.0 UVC HD Webcam id=12 [slave keyboard (3)] ? Asus WMI hotkeys id=13 [slave keyboard (3)] ? AT Translated Set 2 keyboard id=14 [slave keyboard (3)] none of the post cud help to fix it :( help

  Read the article

• How do I get wireless and video working on a Sony Vaio vpc-z21x9r

  - by Alex

  OS: Ubuntu 11.10 Kernel: 2.6.37.6 Laptop: sony vaio vpc-z21x9r The problem: I can't change level of screen backlight; also can't enable wi-fi. While using 3.0 kernel everything is ok, but the laptop discharges too quickly. Results for lspci 02:00.0 Network controller: Intel Corporation Centrino Wireless-N + WiMAX 6150 (rev 5f) VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) there is no wlan0 in ifconfig -a too. I've fount that kernel should already have drivers for this graphics controller, but when i load up in restore mode, it writes "fall" while trying to load up some video drivers. To change the level of backlight i've alrady tried: xbacklight -set XX , smartdimmer -s XX and got this init_ nvclock() failed! also sudo setpci -s 00:02.0 F4.B=XX with no results. As for wi-fi, i've found driver but i don't understand how to install it. Here it is How can I fix these problems? Thank you for your help and time! Also tried to fix problems with backlight writing GRUB_CMDLINE_LINUX_DEFAULT="quiet splash nomodeset acpi_backlight=vendor Still no results. Is there any sense in recompiling kernel, I mean 2.6.37.6. Can it make any improvements in the situation?

  Read the article

• Artec TV18R Tuner not working :(

  - by Antillar Maximus

  Can somebody kindly help me setup my TV Tuner stick? Make and Model: Artec TV18R USB TV Tuner OS: Ubuntu 11.10 64bit Hardware: MSI MS1656-US (GX640 barebones): i5 580M, 2xIntel X25M SSDs, Radeon HD5850M,Realtek sound. Logs and messages: antillar@antillar-MS-1656:/usr/share/dvb/atsc$ [B][COLOR=Red]sudo lsusb[/COLOR][/B] Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 003: ID ffc0:001f Bus 002 Device 005: ID 05d8:8117 Ultima Electronics Corp. [/code][code]antillar@antillar-MS-1656:/usr/share/dvb/atsc$ So, it seems that the tuner is being detected, but the light on it does not turn on? Not sure what is going on? sudo lspci [sudo] password for antillar: 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02) 00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 02) 00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05) 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05) 00:1c.2 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 (rev 05) 00:1c.4 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 (rev 05) 00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05) 01:00.0 VGA compatible controller: ATI Technologies Inc Broadway PRO [Mobility Radeon HD 5800 Series] 01:00.1 Audio device: ATI Technologies Inc Juniper HDMI Audio [Radeon HD 5700 Series] 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) 04:00.0 FireWire (IEEE 1394): JMicron Technology Corp. IEEE 1394 Host Controller 04:00.1 System peripheral: JMicron Technology Corp. SD/MMC Host Controller 04:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller 04:00.3 System peripheral: JMicron Technology Corp. MS Host Controller 04:00.4 System peripheral: JMicron Technology Corp. xD Host Controller 05:00.0 Network controller: Intel Corporation Ultimate N WiFi Link 5300 ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02) ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02) ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02) ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02) ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02) ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02) antillar@antillar-MS-1656:/usr/share/dvb/atsc$ I have been searching for a solution to this all weekend without any luck. I remember reading that ehci_hcd is the problem, but I'm not sure if disabling it is a good idea. I don't want my USB ports to go back to v1.1. Thank you!

  Read the article

• EntSSO stopped working

  - by blomqvist

  My EntSSO (Enterprise Single Sign-On Server, part of BizTalk) did not start today, with the message: The SSO service failed to start. Error Code: 0x80131700 Could not create SSOSQL. To fix the problem, reinstall SSO or try 'regasm SSOSQL.dll' from a Visual Studio command prompt. Error Code: 0x80131700   The only reason for this that I can think of is that I have just installed the .net framework 4.0 RC but I have not verified this. The solution suggest in the error message works like a charm! Open a Visual Studio command prompt and run this command: regasm  ‘C:\Program Files\Common Files\Enterprise Single Sign-On\SSOSQL.dll’ Problem solved!

  Read the article

• LXDE keybind "Raise" window not working

  - by Campa

  I am using LXDE* over Ubuntu Oneiric on a DELL Studio-XPS 64-bit machine and I can't get the keybind for raising windows to work. In my ~/.config/openbox/lxde-rc.xml I put: <!-- Iconify window: it works. --> <keybind key="A-Down"> <action name="Iconify"/> </keybind> <!-- Raise window: does nothing. --> <keybind key="A-Up"> <action name="Focus"/> <action name="Raise"/> </keybind> then I openbox --reconfigure, but no rasing windows keybindings. I could use the NextWindow action, but... not really the same. References: http://openbox.org/wiki/Help:Bindings http://openbox.org/wiki/Help:Actions *Nested question: how to know the version of installed LXDE?

  Read the article

• Is my robots.txt working as it should?

  - by TigerBlood

  I want crawlers to have access to http://www.example.com but not http://www.example.com/ My robots.txt is as follows: User-agent: * Allow: /$ Disallow: / My site is in google search results, but I am not coming up in Bing, Yahoo, etc. I have had the same robots.txt since last year, and I initially requested inclusion ~1 year ago, having also resubmitted the URL to those latter search engines several times since as well. Is my robots.txt blocking those other crawlers? And if so, why not google as well? Thanks in advance!

  Read the article

• Why isn't iTunes working for me?

  - by Sam Mercier

  I know you are to install iTunes in WINE but when ever I open it an error message appears that says Apple Application Support was not found. Apple Application Support is required to run iTunes. Please uninstall iTunes, then install iTunes again. Error 2(Windows error 2) I have tried uninstalling the iTunes, re downloading it and repairing it. Nothing seems to work. Please help me here. Thank you.

  Read the article

• USB Logitech Rumble Pad 2 gamepad AND Thustmaster Universal Challenge Wheel not working in wine

  - by Rick Gionfriddo

  The controller is detected by the OS, and shows up in lsusb, and I can configure it with jstest-gtk, but Live For Speed in Wine doesn't recognize it as connected. Using Lubuntu 12.04, wine version 1.5.5. P.S. - It worked on a previous install of regular Ubuntu 12.04, using the same Wine version. Have tried installing/overriding/un-overriding various DLL's through winetricks to no avail, including xact and dinput8. Since it worked in a previous install of the same version, I figured it was a configuration error, and that I should ask here as opposed to put in a bug report on winehq. EDIT: I just used both controllers in TORCS... why do they work in native games, but not in wine?

  Read the article

• dead keys not working in java app

  - by jippie

  The Arduino IDE is based on a java application called processing. While typing text into processing, it refuses to accept any of the characters under dead keys like " ' ^. As a work around I: Open another window (usually my browser or mail client); I type the character I need; Select and copy the character onto my clip board; Copy the character into processing. What do I have to do to make processing accept characters under dead keys? Disabling dead keys is not an option.

  Read the article

• Working Better With Ruby on Rails

  In the last four years, we have seen how Ruby on Rails (RoR) built on, and accelerated the wider acceptance of, the object-oriented Ruby language. Consequently, the Ruby/RoR combo has become a workho... [Author: Anthony Rainey - Computers and Internet - April 26, 2010]

  Read the article

• My laptop with Linux/ Ubuntu isn't working

  - by Andy Campos

  I have a dell laptop with ubuntu linux. A day I tried to start it up and a black screen just appeared that says: GNU GRUB version1.98+20100804-5ubuntu3 (and these clickable options:) -Ubuntu, with Linux 2.6.35-22-generic -Ubuntu, with Linux 2.6.35-22-generic (recovery mode) -Memory test (memtest86+) -Memory test (memtest86+, serial console 115200) When I click the first one, a bunch of text appears like: mount: mounting /dev/disk/by-uuid/8396a225... failed: invalid argument mount: mounting /dev on /root/dev failed: no such file or directory mount: mounting /sys on /root/sys failed: no such file or directory mount: mounting /proc on /root/proc failed: no such file or directory Target file system doesn't have requested /sbin/init No init found. Try passing init= bootarg Enter 'help' for a list of built-in commands BusyBox v1.15.3 (Ubuntu 1:1.15.3-1ubuntu5) built-in shell (ash) (initramfs) When I enter 'help' a bunch more incomprehensible text appears. Whenever I press the enter key all that pops up is (intetramfs) If anyone can make rhyme or reason out of this please, please help me out so it can boot up normally and i can be set. If there's some kind of special code I have to type in or something I know nothing about computers.

  Read the article

• Working with Reporting Services Filters–Part 5: OR Logic

  - by smisner

  When you combine multiple filters, Reporting Services uses AND logic. Once upon a time, there was actually a drop-down list for selecting AND or OR between filters which was very confusing to people because often it was grayed out. Now that selection is gone, but no matter. It wouldn’t help us solve the problem that I want to describe today. As with many problems, Reporting Services gives us more than one way to apply OR logic in a filter. If I want a filter to include this value OR that value for the same field, one approach is to set up the filter is to use the IN operator as I explained in Part 1 of this series. But what if I want to base the filter on two different fields? I  need a different solution. Using the AdventureWorksDW2008R2 database, I have a report that lists product sales: Let’s say that I want to filter this report to show only products that are Bikes (a category) OR products for which sales were greater than $1,000 in a year. If I set up the filter like this: Expression Data Type Operator Value [Category] Text = Bikes [SalesAmount]   > 1000 Then AND logic is used which means that both conditions must be true. That’s not the result I want. Instead, I need to set up the filter like this: Expression Data Type Operator Value =Fields!EnglishProductCategoryName.Value = "Bikes" OR Fields!SalesAmount.Value > 1000 Boolean = =True The OR logic needs to be part of the expression so that it can return a Boolean value that we test against the Value. Notice that I have used =True rather than True for the value. The filtered report appears below. Any non-bike product appears only if the total sales exceed $1,000, whereas Bikes appear regardless of sales. (You can’t see it in this screenshot, but Mountain-400-W Silver, 38 has sales of $923 in 2007 but gets included because it is in the Bikes category.)

  Read the article

• After upgrading to Ubuntu 12.04, my broadcom wireless sta driver is not working

  - by Nuwan Aluwihare

  I upgraded my HP DV5-1000US Laptop to Ubuntu 12.04. But I cannot get it connected to the Wireless. I went through the settings, Hardware, Additional Drivers and it says that "No proprietary drivers are in use on this system". Also it says "Broadcom STA Wireless Driver" is not activated. I tried to activate it after got my laptop connected to the net through a wired connection, but it says "Sorry, installation of this driver failed. Please have a look at the log file for details: /var/log/jockey.log"

  Read the article

• Software center and update manager not working

  - by lmnop

  When I run update manager I always get this message "The action would require the installation of packages from not authenticated sources." details "libv4l-0 libv4lconvert0" I also can not get the software center to install anything. I get an error message telling me to check my internet connection but I am connected to the internet, shortly after I get an error message just like the one I get from update manager. How do I fix this?

  Read the article

• Dell Mini 9 Integrated Microphone -- not working

  - by Josh Eismanaf

  Im running the latest Debian version, 6.0 on my Dell Mini 9.Webcam and sound work, but microphone is a no-go. I hope even though it is Debian, fellow Linux users can help. In Alsamixer (1.0.23), I have Capture, Digital, and Mic settings all the way up. There are no options for adjusting "Front" mic settings. (May have been for older alsamixer versions?) In Sound Recorder, playback has loud noise/feedback? Under Preferences in Volume Control under the Recording tab, both Capture and Digital are permanently checked, regardless if I uncheck them. I'm not sure how to interpret the above, but I am just trying to offer as much relevant background information as I can. I've been scouring forums for the answer, but to no avail. Most questions/answers are from 2008, and couldn't find a solution. I'm not very handy with the Linux machine, but love to learn / am learning. Also, I've attempted the solution here, and it didn't work. Thanks, in advance, for your help!

  Read the article

• yahoo media player not working

  - by luca590

  I have a yahoo media player embedded in my webpage. I am currently using Ruby on Rails to create/edit my web page. When i click the play button next to a track the YMP waits a while and then goes to the next track without playing the first one. I then get a warning on my second (last) track that its file could not be found. Does anyone has a better recommendation for an audio player or a way to fix this one?

  Read the article

• MiniMax not working properly(for checkers game)

  - by engineer

  I am creating a checkers game but My miniMax is not functioning properly,it is always switching between two positions for its move(index 20 and 17).Here is my code: public double MiniMax(int[] board, int depth, int turn, int red_best, int black_best) { int source; int dest; double MAX_SCORE=-INFINITY,newScore; int MAX_DEPTH=3; int[] newBoard=new int[32]; generateMoves(board,turn); System.arraycopy(board, 0, newBoard, 0, 32); if(depth==MAX_DEPTH) { return Evaluation(turn,board);} for(int z=0;z<possibleMoves.size();z+=2){ source=Integer.parseInt(possibleMoves.elementAt(z).toString()); System.out.println("SOURCE= "+source); dest=Integer.parseInt(possibleMoves.elementAt(z+1).toString());//(int[])possibleMoves.elementAt(z+1); System.out.println("DEST = "+dest); applyMove(newBoard,source,dest); newScore=MiniMax(newBoard,depth+1,opponent(turn),red_best, black_best); if(newScore>MAX_SCORE) {MAX_SCORE=newScore;maxSource=source; maxDest=dest;}//maxSource and maxDest will be used to perform the move. if (MAX_SCORE > black_best) { if (MAX_SCORE >= red_best) break; /* alpha_beta cutoff */ else black_best = (int) MAX_SCORE; //the_score } if (MAX_SCORE < red_best) { if (MAX_SCORE<= black_best) break; /* alpha_beta cutoff */ else red_best = (int) MAX_SCORE; //the_score } }//for ends return MAX_SCORE; } //end minimax I am unable to find out the logical mistake. Any idea what's going wrong?

  Read the article

• Google Goals process not working through similarly named pages

  - by David

  Well, I'm at a loss. I've ensured that my tracking script is in etc etc, and I've set up my goal and funnel path, but only the first step is ever being shown on the funnel. Goal URL: /checkout/checkoutComplete/ Type: Head Match ... but should this be /checkout/checkoutComplete/(.*) and set to regex rather because there are parameters after the main part of the URL (I thought that's what head match was for) Step 1: /checkout/ <-- required Step 2: /checkout/confirm/ both the above are valid and correct URLs for my domain. But for some reason, the funnel visualization shows entries into the first step, then an exits count that matches the entry count, including /checkout/confirm - but it doesn't go on to the next step! Perhaps I'm doing something obviously wrong...but I can't quite see it? Also, semi-related questions. Making a change to the funnel, does it only affect new incoming data? And how often does it update? Thanks in advance for your help.

  Read the article

• Setup shortcut keys not working

  - by Tim

  In my Ubuntu 12.04, in keyboard settings, I didn't find a shortcut key for restarting X, so in "Customer Shorcut", I set up Ctrl+Alt+Backspace for command sudo restart lightdm. But after that the shortcut doesn't work. Is it because it requires root privilege? Also I have a SysRq key on my keyboard, which I think to be the "Magic SysReq Key". My SysRq key is shared with PrtSc key (for screen shoot), and is in blue which means I have to press Fn key at the same time to invoke SysRq instead of PrtSC. But every time I press Fn+SysRq, it always shoots a photo of the screen, same as just hitting PrtSc i.e. without hitting Fn. I wonder how to use the Magic SysReq Key? Does it mean the shortcut has not been linked to any command that is supposed for Magic SysReq Key yet? PS: My laptop is Lenovo T400 and OS is Ubuntu 12.04. Thanks!

  Read the article

• Logitech m510 mouse not working on 12.04 64bit

  - by Alonso

  When I run lsusb, this shows up: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 004: ID 046d:c52b Logitech, Inc. Unifying Receiver I have followed and done all of the stuff in: http://askubuntu.com/questions/154963/ubuntu-cannot-detect-my-logitech-wireless-m510-mouse Yet my mouse still fails to work. When trying to install HIDpoint, this appears after entering Y: libpng does not exist libtiff does not exist Gathering System information and generating a log Launching HIDPoint Installer ./hidpointsetup: error while loading shared libraries: libpng.so.3: cannot open shared object file: No such file or directory What can I do to fix this?

  Read the article

< Previous Page | 54 55 56 57 58 59 60 61 62 63 64 65  | Next Page >