Search Results

Search found 19471 results on 779 pages for 'network troubleshooting'.

Page 58/779 | < Previous Page | 54 55 56 57 58 59 60 61 62 63 64 65  | Next Page >

• Connecting with a BSNL Broadband Internet

  - by user10026

  I am not able to connect my broadband connection with ubuntu and it doesnt work. The connection works fine when I use Windows7 but when i use ubuntu I am not able to access the internet. I followed various steps mentioned in various sites and still could not find a solution. I have installed ubuntu 8.04 in my system. The interface eth0 is not at all detected and when i use the menu system-administrator-network I am not getting an option for wired connection. Just the Wireless connection and Point to Point connection tabs are available.. It's really urgent.. I'll be very happy if u guys can propose to me a working solution to deal with this problem..

  Read the article

• A peculiar issue with nm-applet

  - by montreux

  There is a somewhat strange error that I've noticed with my gnome sessions. It's not a problem that causes a lot of trouble, but at times it becomes annoying. Anyway, here it is: when I fire up gnome-session-fallback (which is the main one I use), the network applet doesn't run with root permission. Here is what it looks like http://i.imgur.com/8kc7Vrd.jpg . On the other hand, here is what the regular gnome session looks like http://i.imgur.com/wfkkE3E.jpg . From the regular session I can easy edit and add networks, but from fallback session I cannot add/edit anything, or turn off/on the wireless or networking. Any ideas?

  Read the article

• HTG Explains: What’s the Difference Between the Windows 7 HomeGroups and XP-style Networking?

  - by Jason Fitzpatrick

  Windows 7 rocks a new method of file and print sharing that’s a departure from the frustrating file and print sharing found in earlier versions of Windows. What is it and how can you benefit from it? Read on as we explain. HomeGroups are a new edition to the Windows ecosystem as of Windows 7. They’re intended to (and succeed at) greatly reducing the frustration experienced by users who want to easily share files between computers as well as share printers with the entire network. Let’s take a look at the state of home networking and how it has evolved.Internet Explorer 9 Released: Here’s What You Need To KnowHTG Explains: How Does Email Work?How To Make a Youtube Video Into an Animated GIF

  Read the article

• configuring two network interfaces in ubuntu 10.04.1

  - by Bill Smith

  I have got two NICs configured on a VM - each is tied to a specific network, one is a DMZ, the other is an internal network. I want MySQL to listen on the internal network only and Apache on the DMZ listening for HTTP and HTTPS. But as soon as I add the second interface I run into trouble. I can hit HTTP on either interface, but can not hit 3306 on the internal network for MySQL. Here's the config... could someone sanity check this please? auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 10.153.24.230 netmask 255.255.255.240 network 10.153.24.224 broadcast 10.153.24.239 dns-nameservers 8.8.8.8 auto eth1 iface eth1 inet static address 10.153.24.195 netmask 255.255.255.224 gateway 10.153.24.193 broadcast 10.153.23.223

  Read the article

• How to set the preffered network interface in linx

  - by Mike Cooper

  I have my network set up like this. http://docs.google.com/Doc?docid=0AZ1YxuLE4djaZGhqN2s1NmRfMjhjNjc0Ym1meg&hl=en In words: I have a machine (Calcium, running Arch Linux) that has two network interfaces. eth0 is hoooked up to a router, and is gigabit. Eth1 is hooked up directly to the university network over 10Megabit. The router's uplink is hooked up to the university network as well, and it is also 10Megabit. Currently (I believe) all traffic on Calcium is going through eth0, through the router, regardless of whether it is internal or external. (How can I confirm this?) Ideally, traffic that is destined for the internal network (192.168.10.0/24) would travel over eth0 to the router, and wherever it is going. ALL other traffic should go over eth1. I suspect that this behavior could be acheived with IP tables? I don't really know where to start looking to learn that though, so any links would be appreciated.

  Read the article

• Mac OS X: network disabled because security breach

  - by fireeyedboy

  Dear all, I just recieved a message on my Mac OS X system telling me (loosely translated from Dutch): "The network has been temporarily disabled because the network's security was breached." (It's a wireless WPA2-PSK secured network BTW) I looked in the logs of my router (a Zyxel P-2602HW-D1A) only to see a few (outbound) "syn flood TCP ATTACK" logs, but those were from like a week ago, other than that nothing. What tools on Mac OS X do I have to analyse this security breach occurence? Are there some security logs on Mac OS X that I can inspect? What other measurements should I take? And how serious should I take this warning from Mac OS X? System: Macbook Pro Intel Core 2 Duo 2.2 Ghz OS: Mac OS X 10.5.8 Network: wireless WPA2-PSK Relevant software: Parallels Desktop with Windows XP (was open, but stopped at the time) Other systems on my network: Windows XP SP3 desktop (was running at the time) If you need any more info, don't hestitate to ask. Thanks in advance.

  Read the article

• How to set the preferred network interface in linux

  - by Mike Cooper

  I have my network set up like this. http://docs.google.com/Doc?docid=0AZ1YxuLE4djaZGhqN2s1NmRfMjhjNjc0Ym1meg&hl=en In words: I have a machine (Calcium, running Arch Linux) that has two network interfaces. eth0 is hoooked up to a router, and is gigabit. Eth1 is hooked up directly to the university network over 10Megabit. The router's uplink is hooked up to the university network as well, and it is also 10Megabit. Currently (I believe) all traffic on Calcium is going through eth0, through the router, regardless of whether it is internal or external. (How can I confirm this?) Ideally, traffic that is destined for the internal network (192.168.10.0/24) would travel over eth0 to the router, and wherever it is going. ALL other traffic should go over eth1.

  Read the article

• Docking Station Disabling/Enabling Network Connection

  - by bryan_cook

  Whenever I dock my laptop onto my docking station, Windows disables my Wireless Network Connection and enables my Wired Network Connection. Whenever I undock my laptop, Windows disables my Wired Network Connection and enables my Wireless Network Connection. Is there a way to disable this feature? After Windows performs the automatic disabling/enabling, I run into errors when I try to disable the now-enabled connection, specifically "It is not possible to disable the connection at this time. This connection may be using one or more protocols that do not support Plug-and-Play, or it may have been initiated by another user or the system account." I'm assuming the latter portion of the error is true ... my network connections are being enabled/disabled under a system account. Regardless, I'd just like to disable the feature altogether. For reference, I'm working with Windows XP Professional on a Dell Latitude D630. Thanks in advance!

  Read the article

• Cannot remove wireless network profile even though admin account is used

  - by David Karlsson

  On my windows computer which is connected to a company domain. I have problems with the wireless networking. First of all the computer fails to connect. Second of all I cannot remove the network from the list of wireless profiles. The properties window simply claims that "This network is administered by the Administartor Account". I am currently logged in as the local administrator. I have also tried creating a new admin account and still get the same problem when trying to remove the network. My computer has only the microsoft security essentials antivirus and some VMWare+virtual box connections that I can figure might interfere, but disabling realtime protection has not helped me on this. I also cannot delete the virtual network adapters from the control panel / network adapters...

  Read the article

• How to install Windows 7 From Network?

  - by George

  Hello SuperUser My question is that is it possible to install Windows 7 (Current RTM Version) on a computer without using removable media like DVD or USB. First thing that comes to my mind is network but i dont have experience of doing Fresh Install of Windows 7 via Network. How to install Windows 7 via network without any removable media? P.S. I know some may think that doing so, is just a waste of time and it's easier to do it with removable media, but in current situation the target PC neather has CD/DVD Drive nor supports booting from USB. And in addition to that, Target computer is connected to Network via Wireless Network (Dunno if it will make any problem with installation).

  Read the article

• windows 7 wireless knocks off other computers on the network

  - by Sean

  I am trying to fix a wireless network issue. When a new windows 7 machine (we have 2 in the house) we have problems with any other windows xp machines connecting to the wireless network. I am using a linksys WRT110 running Firmware Version: 1.0.04 (which is not the latest firmware its Ver.1.0.07 but the router would not use the bin update file). I have tried a ton of variations in setting for the wireless network, changed the channel, the security level (none, wep wpa, wpa2), network type (g,bg mixed). I have also read some stuff about homegroup settings for windows 7 but have not seen any differences that make a difference. Basically windows 7 does not like to connect to our network but when I manage to get it to work the windows xp pro machines get kicked off. The windows xp pro machines are a few years old but both windows 7 machines are less than 6 months old.

  Read the article

• Network connectivity logs on OSX

  - by Stephen

  I'm trying to determine whether or not Macs store a log of network connectivity. Specifically, I'm trying to find out if one of my machines (Mac Tower, OSX 10.7.4, 2-2.26 GHz, 16 GB DDR3) lost connection to pinpoint an issue. This machine is on an external network where and the IT staff is not very helpful, so I'm trying to ensure that there were network issues rather than some other local issue on that particular machine. Can you pull network logs thru Console that show when a network connection was established and was disconnected?

  Read the article

• Dell Dimension 2350 with a Pentium IV processor and integrated video and network chips running Fedor

  - by Jim Dobbs

  Dell Dimension 2350 with a Pentium IV processor and integrated video and network chips running Fedora12 does a "Sleeping Beauty" and I, apparently, am not am not a "handsome prince"! The system puts video and network to sleep and it will not wakeup. I have heard of this problem on laptops, but this is a tower. Any ideas or help is appreciated. I tried to ping the network card from another system and ping fails. The logs indicate that the system continues to be active. Pressing keyboard short-cut keys makes the disk light blink but neither the video or network card comes alive. Failing all else, are there any Linux commands that I could schedule in cron to pulse video and network adapters hourly that will keep them awake? Or, should I wait on Fedora13? Before this machine, I built a Dimension 2400 with Pentium IV and it had the same problem. Fedora9 on the same hardware is fine.

  Read the article

• network user isolation

  - by seaquest

  My question is for a network with a Linux iptables router gateway. How can it be possible to prevent inter-network traffic of those users. Think this case as a public network, IPs are distributed through linux gw and users are authenticated thru the gateway. We want to protect public users from public users. Network is not wireless and I can not use Wireless AP user isolation. Actually I have a simple method. Subnet the network into /30 mask. Give minimum IP of each subnet to the gateay and ditribute those /30 IPs from the subnet. But this is pretty costly for such an aim. I want to ask for other methods Thanks.

  Read the article

• Excel IP address and subnet to network and inverse mask [closed]

  - by Steve Dailey

  We need a script, marco or something in excel where we can take list like below interface Vlan100 ip address 192.168.1.3 255.255.255.0 interface Vlan101 ip address 192.168.2.3 255.255.255.128 interface Vlan102 ip address 192.168.2.130 255.255.255.128 interface Vlan103 ip address 192.168.3.3 255.255.255.240 etc... and produce a list like below ospf 1 undo silent-interface Vlan-interface100 undo silent-interface Vlan-interface101 undo silent-interface Vlan-interface102 undo silent-interface Vlan-interface103 area 0.0.0.0 network 192.168.1.0 0.0.0.255 network 192.168.2.0 0.0.0.127 network 192.168.2.128 0.0.0.127 network 192.168.3.0 0.0.0.15 so it will need to take an ip address/subnet mask and convert them to network number/inverse mask. I believe I can handle the Vlan manipulation with a substitution so no need to spend time on that.

  Read the article

• Windows 8 doesn't automatically join Wi-Fi network if Ethernet connection is active

  - by Herb Caudill

  In Windows 7, my laptop would automatically join both an Ethernet network and the Wi-Fi network in my house (both going through the same router). In Windows 8, if the Ethernet connection is present, it doesn't join the Wi-Fi network at all. The reason I noticed this is that if Wi-Fi isn't active, I don't see my AirPlay speakers. My wireless printer is also unavailable until I manually connect to Wi-Fi. To recap: When I turn on my computer and it's connected to Ethernet, this is what my Network Connections control panel looks like: After I manually join my Wi-Fi network, it looks like this: I would prefer for it to join both networks automatically on startup, the way it did in Windows 7. Is there a way to make this happen?

  Read the article

• Accessing network resources via vpn connection failes

  - by LikeHoo

  I already found some information on this problem here, but I still can't get it to work. Im trying to access some network resources on my server via vpn over the net. Im using a win7 home pc here and a win server 2008 rc2 with installed ras&routing role on the server. For vpn authentication I use a local user on the server with vpn-access. This user also has the rights to access to the network resources, but it neither finds the server under network nor is it able to connect the network drives... In similar topics here I found out that using the same credentials for vpn-authentication and network resources access does not work, but using different user for access didn't work either. All of these examples I found were in an active directory structure, but I don't have an active directory here. Does anyone know how to solve this problem without having to use an active directory? Thanks

  Read the article

• Cisco ASA - Unable to create "range" type of network object on 8.2

  - by j2k4j

  I'm wanting to block a range of ip addresses on my Cisco ASA 5520 (8.2) using ASDM 6.4. In the help files/cisco documentation, it says, just create a network object with a "range" type, and use that in a blocking access rule... When I'm accessing the ASA (8.2) with ASDM 6.4, I go to configfirewallobjectnetwork objects & groups, then click "add" to add the IP range as a "network object", I get the following 4 fields to fill out: Name: IP address: Netmask: Description: That's all... In the context-sensitive help files, it says that there should be a Type drop-down to select, with "range" being one of the options, but there is no "Type" drop-down list... If I try to create a "network object group" instead of just "network object", then I get a "Type" drop down list, but it only contains two options: network & host (No "Range" option here either) Can someone help me figure out how to block a range of IP's, using the current 8.2 version on the ASA? Thanks for any pointers or tips!

  Read the article

• Can't connect back to the wireless network after the password was changed

  - by 7777

  Family changed the network password and some other network settings after new computers were brought into the house because apparently they wouldn't work with what we had. Actually an off-site tech remotely changed it, and I have no idea what he did. My laptop detects the network (it shows up under available networks) but whenever I try to connect it says: Windows is unable to connect to the selected network. The network may no longer be in range. Please refresh the list of available networks, and try to connect again. I wish I could give more details, config settings, but frankly I have no idea what I'm looking for. This is XP (also, not a password issue, I know the password, it's just that I have no idea where to enter it, etc.)

  Read the article

• vmware workstation - virtual network adapters missing from ipconfig, still show in networking (XP host)

  - by Adam

  Hi Folks - here's a new one for me, and my first time posting here: I installed VMWare workstation 7.1 on a new PC. VMWare properly installs the virtual network adapters under the Network Connections control panel, however for some reason they do not show up under ipconfig, which is very weird. They also don't appear anywhere in "route print". I don't have network connectivity to the VM. My guesses are perhaps some conflict with Symantec AntiVirus or Symantec Client Firewall. Tried the following things: enabling TCP/IP in the virtual network adapters (they often get installed with it disabled for some reason) Restoring defualts in the VMnetcfg gui tool (this causes an uninstall and reinstall of the virtual network adapters on the host) Re-installing vmware workstation Uninstalling checkpoint secureremote and then reinstalling vmware Just to be clear, this problem is totally on the host. In my searching for stuff about (non-vmware) adapters missing from ipconfig, I see some posts about resetting the TCP/IP stack using netsh. Looking into that next... Thanks!

  Read the article

• Linux - Block ssh users from accessing other machines on the network

  - by Sam

  I have set up a virtual machine on my network for uni project development. I have 6 team members and I don't want them to SSH in and start sniffing my network traffic. I already have set the firewall on my W7 pcs to ignore any connection attempts from the Virtual Machine, but would like to go a step further and not allow any network access from the VM to other machines on my network. Team members will be access the VM by SSH. The only external port forwarded is to vm:22. The VM is running in VirtualBox on a bridged network connection. Running latest Debian. If someone could tell me how to do this I would be much obliged.

  Read the article

• Corrupted network from ipad

  - by lisa

  All wireless clients were kicked off the network (3 PCs & 1 iPad). Only a PC with a wired connection was still able to connect. This morning I discovered that the network had been renamed and a new password had been assigned. Via Linksys Updater I gave a new password. Strangely, in my Windows Control Panel/Network connections our old password now exists as an unsecured network, that I cannot delete! When I attempt to connect using this bastard network, I get an Apple Push error. Linksys WRT610N PCs all using Windows 7 (wired & wireless) iPad 2

  Read the article

• Linux: how to verify my network configuration before doing a restart

  - by wael34218

  I am trying to build a network bridge for my VMs on a server. So I added a new file and changed another in the /etc/sysconfig/network-scripts directory. Then I did a network reboot with the following command:/etc/init.d/network restart After that the server was not up again. I contacted the hosting provider's support for help. I need a way to verify my new configuration before a network restart. I need to make sure that it will be up again, just like apache's /etc/init.d/httpd configtest

  Read the article

• Taskbar Disappears Over Remote Desktop Connection When Outside Local Network

  - by CMikeB1

  I've got a machine on my home network running Windows Server 2012 (Based on Win8) and rather than attach a monitor I remote desktop in and it works fine on my local network. The problem is, when I try to access it from outside my local network the taskbar disappears completely. When I minimize an application rather than minimize to the taskbar it simply closes the window as small as it can as if the taskbar never existed (see photos at ). I've messed with the connection properties (show/hide desktop background, etc.) with no luck. I've used the following methods to remote in and they all are fine when on the local network and taskbar-less from outside: Remote Desktop Connection on Mac Remote Desktop Connection on Windows Jump Desktop on iOS using RDP To access the computer from outside my local network I'm using a Linksys router and mapping to the server IP, port 3389. See Photos: http://i.stack.imgur.com/FyUeQ.png http://i.stack.imgur.com/9MnVr.png

  Read the article

• Network Table assistance

  - by mitchnufc

  I am designing a small network and have came up with the following table I am just wondering if this seems right, would appreciate some feedback, thanks. Network/Router First IP Last IP Subnet Host Broadcast Router 1 162.10.0.1 162.10.0.7 255.255.255.248 162.10.0.0 162.10.0.8 Network 1 162.10.1.1 162.10.2.253 255.255.254.0 162.10.1.0 162.10.2.254 Network 2 162.10.0.9 162.10.0.14 255.255.255.248 162.10.0.8 162.10.0.15 Router 2 162.10.0.17 162.10.0.18 255.255.255.252 162.10.0.16 162.10.0.19 Network 3 162.10.0.21 162.10.0.146 255.255.255.128 162.10.0.20 162.10.0.147 Router one is the IP assigned by the ISP

  Read the article

< Previous Page | 54 55 56 57 58 59 60 61 62 63 64 65  | Next Page >