Search Results

Search found 15306 results on 613 pages for 'nothing'.

Page 58/613 | < Previous Page | 54 55 56 57 58 59 60 61 62 63 64 65  | Next Page >

• Toshiba wireless is blocked

  - by zorrillo

  I have the same problem, a 32 bits toshiba nb255, it first had the windows 7 bu next I installed the ubuntu 11.04. The wifi does not turn on. I used the following issues the commands rfkill unblock wlan0, sudo ifconfig wlan0 down; they were not able. by setting up the bios in advanced menu, the wireless communication sw in ON, but it did not work also. neither the utilities toshiba nor utilities of ubuntu (wicd, wifi radar). by using gedit to file group, nothing. by installing madwifi packet, nothing. by exporting the wifi driver from windows to ubuntu, by means of the NDISwrapper packet, neither. I put the current scripts of the ouput of the cli root@zorrillo:~# rfkill list 0: phy0: Wireless LAN Soft blocked: no Hard blocked: yes root@zorrillo:~# sudo lspci | grep Atheros 07:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) root@zorrillo:~# root@zorrillo:~# ifconfig -a eth0 Link encap:Ethernet direcciónHW 88:ae:1d:47:df:e1 ACTIVO DIFUSIÓN MULTICAST MTU:1500 Métrica:1 Paquetes RX:0 errores:0 perdidos:0 overruns:0 frame:0 Paquetes TX:0 errores:0 perdidos:0 overruns:0 carrier:0 colisiones:0 long.colaTX:1000 Bytes RX:0 (0.0 B) TX bytes:0 (0.0 B) Interrupción:43 Dirección base: 0xe000 lo Link encap:Bucle local Direc. inet:127.0.0.1 Másc:255.0.0.0 Dirección inet6: ::1/128 Alcance:Anfitrión ACTIVO BUCLE FUNCIONANDO MTU:16436 Métrica:1 Paquetes RX:8 errores:0 perdidos:0 overruns:0 frame:0 Paquetes TX:8 errores:0 perdidos:0 overruns:0 carrier:0 colisiones:0 long.colaTX:0 Bytes RX:480 (480.0 B) TX bytes:480 (480.0 B) ppp0 Link encap:Protocolo punto a punto Direc. inet:189.203.115.236 P-t-P:192.168.226.1 Másc:255.255.255.255 ACTIVO PUNTO A PUNTO FUNCIONANDO NOARP MULTICAST MTU:1500 Métrica:1 Paquetes RX:6384 errores:30 perdidos:0 overruns:0 frame:0 Paquetes TX:6893 errores:0 perdidos:0 overruns:0 carrier:0 colisiones:0 long.colaTX:3 Bytes RX:5473081 (5.4 MB) TX bytes:974316 (974.3 KB) wlan0 Link encap:Ethernet direcciónHW 00:26:4d:c3:d0:44 DIFUSIÓN MULTICAST MTU:1500 Métrica:1 Paquetes RX:0 errores:0 perdidos:0 overruns:0 frame:0 Paquetes TX:0 errores:0 perdidos:0 overruns:0 carrier:0 colisiones:0 long.colaTX:1000 Bytes RX:0 (0.0 B) TX bytes:0 (0.0 B) note.-it is logical all the counters are cero if the wireless device is down root@zorrillo:/home/zorrillo/Descargas/802BGA# ifconfig wlan0 up SIOCSIFFLAGS: Operation not possible due to RF-kill root@zorrillo:/home/zorrillo/Descargas/802BGA# It would seem the wireless switching does not react with whichever ubuntu 11.04 command (I hope to be wrong). The target remains the same, in order of the scripts above. I am worried, I have tried to find any answer for days and nights. Toshiba does not supply drivers or soft support for linux, marketing of course. I only see the device is up by protocols and down phisically, My question is, is it possible to enable or not shutdown physically the device?, because in the toshiba model nb255 the wifi is not set up/down bye means of a physical switch, but by means a combination of Fn + F8 (only for windows 7, no one more), Is there one possibility to configure the hot keys in ubuntu?

  Read the article

• Ubuntu 12.4.1 failing in vm both Vbox and Vmware on new HP Envy 4t-1000

  - by Chas

  Brand new to Linux, getting frustrated trying to get an environment up with Ubuntu. My primary goal is to learn Linux and Apache/PHP development. I need to keep my Windows OS as main on my machine for work, so i'm trying to virtualize Ubuntu 12.4.1 without luck (many attempts). I have a new HP Envy 4t-1000 with 16gb ram, and 32 gb ssd caching with 500gb spindle hard drive. Graphics card is an Intel HD 3000 with AMD Radeon 7670M. With installing Ubuntu desktop in VBox, I'm getting this result: https://forums.virtualbox.org/viewtopic.php?f=6&t=51939 With VMware workstation 7 (patched), I complete the install of Ubuntu, it reboots, purple desktop briefly flashes then it drops to command line. I bought a beginning Ubuntu book, and it recommends trying to manually configure graphics if this happens. So I tried doing a safe boot holding shift - I get to the first screen (GRUB) loads fine, and I choose recovery mode. After choosing the recovery mode, I get the recovery mode options, and can arrow down to what the book suggests 'Run in fail safe graphic mode.' Once I select this option, I get a black screen with a large white dialogue box, at the top it says "The system is running in low-graphics mode. Your screen, graphics card, and input device settings could not be detected correctly. You will need to configure these yourself." Then there is an ok button way down at the bottom. When I select 'ok' I get a menu for a few options, book recommended 'reconfigure graphics.' When I try this, I get a menu of two options: 1) "Use generic (default) configuration or 2) use backup. I've tried both options several times, hitting ok just refreshes screen and nothing more. Rebooting at this point just goes back to command line as before. I don't know what to do at this point, I've spent too many hours this weekend trying in both VBox and VMware to get Ubuntu going. Isn't there like a very basic graphic display or something I can use to at least get into the desktop? I explored the GRUB some more, and tried to look at the startup and xserver logs - both are blank. No help there I guess? When I try to choose 'Edit the configuration file, then 'ok' screen just refreshes on same menu options, nothing happens. thx for any advice. I really need to focus on learning Linux, Apache and PHP, so perhaps Ubuntu just won't work on my hardware? Any other suggestions? I will need to virtualize - THANKS for any help/advice.

  Read the article

• System Settings and Software Center does not pull up after fresh install 11.10 amd64

  - by hydroparadise

  I've had a few install rounds with ubuntu ever since 8.04 and has worked flawlessly every time. However, for some reason, when I try to click either System Settings or Software Center, the icon pulses as if it were working to come up but never does. The same goes for System Settings. I would expect that a password dialog would appear, but nothing shows. Is there bug with 11.10 that didn't exist with 11.04?

  Read the article

• SCO Bankruptcy - The Dec. 30, 2009 Hearing Transcript &amp; Order Giving Darl the Mobility ...

  <b>Groklaw:</b> "I view the bankruptcy hearings at this point as comic relief, since nothing goes the way any of us here think they should. Bankruptcy court seems like cartoon court to me. So, when I heard that the December 2009 hearing transcript [PDF] was available, I said, Oh, goody!"

  Read the article

• Using all Ten IO slots on a 7420

  - by user12620172

  So I had the opportunity recently to actually use up all ten slots in a clustered 7420 system. This actually uses 20 slots, or 22 if you count the clusteron card. I thought it was interesting enough to share here. This is at one of my clients here in southern California. You can see the picture below. We have four SAS HBAs instead of the usual two. This is becuase we wanted to split up the back-end taffic for different workloads. We have a set of disk trays coming from two SAS cards for nothing but Exadata backups. Then, we have a different set of disk trays coming off of the other two SAS cards for non-Exadata workloads, such as regular user file storage. We have 2 Infiniband cards which allow us to do a full mesh directly into the back of the nearby, production Exadata, specifically for fast backups and restores over IB. You can see a 3rd IB card here, which is going to be connected to a non-production Exadata for slower backups and restores from it.The 10Gig card is for client connectivity, allowing other, non-Exadata Oracle databases to make use of the many snapshots and clones that can now be created using the RMAN copies from the original production database coming off the Exadata. This allows for a good number of test and development Oracle databases to use these clones without effecting performance of the Exadata at all.We also have a couple FC HBAs, both for NDMP backups to an Oracle/StorageTek tape library and also for FC clients to come in and use some storage on the 7420.  Now, if you are adding more cards to your 7420, be aware of which cards you can place in which slots. See the bottom graphic just below the photo.  Note that the slots are numbered 0-4 for the first 5 cards, then the "C" slots which is the dedicated Cluster card (called the Clustron), and then another 5 slots numbered 5-9. Some rules for the slots: Slots 1 & 8 are automatically populated with the two default SAS cards. The only other slots you can add SAS cards to are 2 & 7. Slots 0 and 9 can only hold FC cards. Nothing else. So if you have four SAS cards, you are now down to only four more slots for your 10Gig and IB cards. Be sure not to waste one of these slots on a FC card, which can go into 0 or 9, instead.  If at all possible, slots should be populated in this order: 9, 0, 7, 2, 6, 3, 5, 4

  Read the article

• No wired and wireless connection found after upgrading 12.04

  - by ag108

  After upgrading 12.04 LTS, my wired connection works but no wireless connection found. I tried many suggestion for wireless connection on Ubuntu forum but nothing works for me. Now, maybe by mistake, I am also unable to connect Internet through wired connection. Now, (1) its says "No network devices available" and (2) in System Settings ? Hardware ? no additional driver icon is showing Please help. I don't know much about Ubuntu.

  Read the article

• Is it possible to install Adobe Master Collection CS5.5 into ubuntu without using a Virtual Windows?

  - by Justanotherubuntuuser

  I recently decided to install ubuntu, i formatted my pc and i installed both Ubuntu and Windows. Since it is hard sometimes to get games to work in ubuntu (specially the new ones) i decided to use Windows mostly for games and ubuntu for work applications, such as programming, the adobe suite and whatnot. Here's my question: Is there anyway i can use Adobe Master Collection within ubuntu without using virtual mode? I've been searching it all over the internet but i get nothing.

  Read the article

• ps3 controller failed to pair

  - by Michael Ropy

  I'm trying to pair my ps3 controller with trusty. I've tried this so far: $ sudo sixpair Current Bluetooth master: xx:xx:xx:xx:xx:xx Setting master bd_addr to xx:xx:xx:xx:xx:xx And then I unplug my controller and run this command: $ sixad --start D-Bus setup failed: Name already in use sixad-bin[4843]: started sixad-bin[4843]: sixad started, press the PS button now But when I press the PS button, nothing happens! I've searched a lot in Google and this process works everywhere, but I don't know it doesn't work here...thanks for your help...

  Read the article

• Accounting for waves when doing planar reflections

  - by CloseReflector

  I've been studying Nvidia's examples from the SDK, in particular the Island11 project and I've found something curious about a piece of HLSL code which corrects the reflections up and down depending on the state of the wave's height. Naturally, after examining the brief paragraph of code: // calculating correction that shifts reflection up/down according to water wave Y position float4 projected_waveheight = mul(float4(input.positionWS.x,input.positionWS.y,input.positionWS.z,1),g_ModelViewProjectionMatrix); float waveheight_correction=-0.5*projected_waveheight.y/projected_waveheight.w; projected_waveheight = mul(float4(input.positionWS.x,-0.8,input.positionWS.z,1),g_ModelViewProjectionMatrix); waveheight_correction+=0.5*projected_waveheight.y/projected_waveheight.w; reflection_disturbance.y=max(-0.15,waveheight_correction+reflection_disturbance.y); My first guess was that it compensates for the planar reflection when it is subjected to vertical perturbation (the waves), shifting the reflected geometry to a point where is nothing and the water is just rendered as if there is nothing there or just the sky: Now, that's the sky reflecting where we should see the terrain's green/grey/yellowish reflection lerped with the water's baseline. My problem is now that I cannot really pinpoint what is the logic behind it. Projecting the actual world space position of a point of the wave/water geometry and then multiplying by -.5f, only to take another projection of the same point, this time with its y coordinate changed to -0.8 (why -0.8?). Clues in the code seem to indicate it was derived with trial and error because there is redundancy. For example, the author takes the negative half of the projected y coordinate (after the w divide): float waveheight_correction=-0.5*projected_waveheight.y/projected_waveheight.w; And then does the same for the second point (only positive, to get a difference of some sort, I presume) and combines them: waveheight_correction+=0.5*projected_waveheight.y/projected_waveheight.w; By removing the divide by 2, I see no difference in quality improvement (if someone cares to correct me, please do). The crux of it seems to be the difference in the projected y, why is that? This redundancy and the seemingly arbitrary selection of -.8f and -0.15f lead me to conclude that this might be a combination of heuristics/guess work. Is there a logical underpinning to this or is it just a desperate hack? Here is an exaggeration of the initial problem which the code fragment fixes, observe on the lowest tessellation level. Hopefully, it might spark an idea I'm missing. The -.8f might be a reference height from which to deduce how much to disturb the texture coordinate sampling the planarly reflected geometry render and -.15f might be the lower bound, a security measure.

  Read the article

• ipheth notification at login prompt

  - by spudwaffle

  On my command line only Ubuntu machine, the login prompt occasionally shows a warning: Ubuntu 12.04 LTS myserver tty1 myserver login: [833747.589882] ipheth: ipheth_rcvbulk_callback: urb status: -71 Nothing is obviously wrong with the system, and I can enter my username and password without issue. What does this message mean and should I be worried about it? Edit: I've found plugging in and then removing my iPhone from the computer causes this message. I'm still looking for what it means.

  Read the article

• Sorting Out the Many Faces of Cloud Computing

  There are two extreme camps on either side of the cloud computing argument. One says everything is moving to the cloud; the other says nothing will.

  Read the article

• Accessing Controls Within A Gridview

  - by Bunch

  Sometimes you need to access a control within a GridView, but it isn’t quite as straight forward as just using FindControl to grab the control like you can in a FormView. Since the GridView builds multiple rows the key is to specify the row. In this example there is a GridView with a control for a player’s errors. If the errors is greater than 9 the GridView should display the control (lblErrors) in red so it stands out. Here is the GridView: <asp:GridView ID="gvFielding" runat="server" DataSourceID="sqlFielding" DataKeyNames="PlayerID" AutoGenerateColumns="false" >     <Columns>         <asp:BoundField DataField="PlayerName" HeaderText="Player Name" />         <asp:BoundField DataField="PlayerNumber" HeaderText="Player Number" />         <asp:TemplateField HeaderText="Errors">             <ItemTemplate>                 <asp:Label ID="lblErrors" runat="server" Text='<%# EVAL("Errors") %>'  />             </ItemTemplate>         </asp:TemplateField>     </Columns> </asp:GridView> In the code behind you can add the code to change the label’s ForeColor property to red based on the amount of errors. In this case 10 or more errors triggers the color change. Protected Sub gvFielding_DataBound(ByVal sender As Object, ByVal e As System.EventArgs) Handles gvFielding.DataBound     Dim errorLabel As Label     Dim errors As Integer     Dim i As Integer = 0     For Each row As GridViewRow In gvFielding.Rows         errorLabel = gvFielding.Rows(i).FindControl("lblErrors")         If Not errorLabel.Text = Nothing Then             Integer.TryParse(errorLabel.Text, errors)             If errors > 9 Then                 errorLabel.ForeColor = Drawing.Color.Red             End If         End If         i += 1     Next End Sub The main points in the DataBound sub is use a For Each statement to loop through the rows and to increment the variable i so you loop through every row. That way you check each one and if the value is greater than 9 the label changes to red. The If Not errorLabel.Text = Nothing line is there as a check in case no data comes back at all for Errors. Technorati Tags: GridView,ASP.Net,VB.Net

  Read the article

• As an Indie iOS Developer, is it more profitable to market apps heavily or focus on publishing more apps? [closed]

  - by user69860

  At first I thought that if I made a bunch of $0.99 apps that were all pretty nice that they would eventually start to make me some decent passive income. However, after publishing five $0.99 applications in the the Apple App Store, I'm finding that I make around $5/day, which is basically nothing. Should I invest time into creating an even better app, hire a designer, spend money on PR and marketing, and then keep spending time updating/managing that app? Or should I continue to produce more applications solo?

  Read the article

• Can Anything be Done to Make Improv (a 1993 Win 3.1 App) handle larger Files?

  - by user75185

  My very favorite spradsheet is Improv, a 1993 Windows 3.1 application. It still puts Excel to shame for building spreadsheets and writing formulas. The only problem is because Improv was written when 1 Meg of RAM was state of the art, it becomes unstable when working with larger spreadsheets and often crashes and/or corrupts the data file. I am working on a project that greatly exceeds Improv's limits. Although it will ultimately require more robust databasing capability, I could save a lot of critical time if I could delay that headache and continue working in Improv for now. To that end, I moved to the only product I could find that comes close, Quantrix, which is nothing more than Improv updated to handle large spreadsheets and utilize today's technologies. The problems with Quantrix are its speed (significantly slower than Improv) and its $1000 price (which I cannot afford). I have already had 3 15 day extensions after the initial 30 day trial, so my time to use Quantrix as a bridge is at its end. Searches for Improv over the years have gotten me nowhere and, not surprisingly after reading some posts on this site, I got nothing for the money and time invested to find a programmer to write code to "fix" this problem. Improv is freely available as "abandonware" at http://vetusware.com/download/LotusImprov2.1/?id=5797 , and the best background info can be found on Wikipedia and at "Moose's Greatest Software Products of All Time - Lotus Improv" http://moosevalley.fhost.com.au/mooses_review_page_lotus_improv.html It is critically urgent for me to focus on analyzing the data asap. Working in a stable Improv would, without question, be the fastest route. To that end, I am looking for answers to the following questions and anything else that might be helpful: 1) Is it lawful to hire someone to fix Improv for my own use? If so, 2) About how much should it cost? 3) About how long should it take? 4) What skills should I be looking for &/or how should a post be worded? 5) Is there a niche site where it should it be posted? 6) What questions can I ask to quickly screen candidates? Since I am not a programmer, I need questions the answers to which leave no room to confuse me, whether intentional or not. For example, what tools or players should someone with an acceptable competency level have knowledge of?

  Read the article

• jquery not running from <body> [closed]

  - by Andre

  I'm calling a function that's loaded in custom js file in the header. my.js has $(document).ready(function(){ function testFunction(){ alert("inside testfunction"); } }); after a few clicks, this is loaded in the : $("#someid").live($.myapp.event.play, function(event) { alert("this works"); testFunction(); }); the alert "this works", fires, but then nothing happens, what am I doing wrong?

  Read the article

• Three Tips to Getting the Most of the Best Joomla Templates

  When it comes to the world of online promoting there is nothing more vital that a company will do than setting up their own site. This decision allows any company to show to the online world not only... [Author: Joel Morrison - Web Design and Development - April 10, 2010]

  Read the article

• Grep, no value return

  - by Daniel S.

  I am searching for a word, in this case "hehe" that is located in the file findTest by using grep, but when i initiate the search: grep -r "hehe" or grep -lr "hehe" it starts but after 5 min waiting nothing happens, even if i am in the same directory as the file. the only way i get a results straight away is being in the same directory and typing: grep "hehe" findTest Are their any other ways to search for a word? even if not in the same directory.

  Read the article

• The Seven Sins against T-SQL Performance

  There are seven common antipatterns in T-SQL coding that make code perform badly, and three good habits which will generally ensure that your code runs fast. If you learn nothing else from this list of great advice from Grant, just keep in mind that you should 'write for the optimizer'. Compress live data by 73% Red Gate's SQL Storage Compress reduces the size of live SQL Server databases, saving you disk space and storage costs. Learn more.

  Read the article

• help me with my wine, it doesn't work proper

  - by Sebastian Raun Mikkelsen

  When i try to run something with wine, nothing happens! i have many problems with ubuntu so i have tried to get windows 8 back on the computer, but because ubuntu cant run exe files i cant open the installer. evenmore my computer cant boot from a CD/DVD anymore after i installed ubuntu, i turns op with a black screen with a blinking marker at the upper left corner of the screen and after 10 minutes it says something like " cant boot from the selected mediadevice - select another" so how to get windows back?

  Read the article

• Audio not working for Gnome Screencast Ctrl + Alt + Shift + R

  - by Costa

  I can do screencasts by pressing ctrl+alt+shift+r, but I get no sound when I view the videos, I've check my built in mic and headset, they both work on skype and such, I just can't record sound with the gnome built in screencasting. Also, when I open the videos in movieplayer they are in mute by default and there's nothing the the preferences I can find to change that. Any help would be awesome!

  Read the article

• Fusion-Icon does not show up in system tray

  - by Schubibuntu

  I can't find a solution for my problem online: I'm running Unity 2D in Ubuntu 11.10 and want to enable compiz effects. I installed compiz config settings manager, and Fusion-Icon, but when I start Fusion-Icon nothing happens. When I execute it from terminal it stucks at lines like "setting update 'command'" or "setting update 'next_key'" I already set the whitelist for the panel to 'all'. Anyone knows what I'm missing? Thanks in advance!

  Read the article

• Why does not my laptop detect my LCD television when I use a cable VGA?

  - by user48221

  Sometimes I want to see a movie or some video one, and to be able to see it better want to connect my laptop to my LCD television using an exit VGA, but when I put him where he says screens, it does not detect the LCD screen to me and arrives at the left side there goes out a little that "stranger" says, I select the option that he says " to detect monitors " but nothing happens. I use ubuntu 11.10

  Read the article

• Chapters Two, Three, and Four

  - by drsql

  I am trying to blog all of the chapters of the book, but due to deadlines and a lot of shuffling about, I never got around it for these three chapters, two of which I have added since I wrote the original table of contents. All of these contain mostly material from previous editions of the book, updated a good amount, but nothing tremendously different if you had memorized the material from the previous edition. As such, the pre-writing blog ritual wasn’t as necessary (for me at least) as it is going...(read more)

  Read the article

• My Blog Needs some Upgrading !

  - by EmBeRlicious

  I have been browsing all night for a way to improve my blog on blogger and actually nothing came up just that i could include some widgets that need java codes. Witch are the best widgets i could add without killing the SEO and where is a good place i could find ways to Tweak my blog and learn to sustain it better. It's my first blog and maybe it will not go viral but at least i want to try ! Thank you so very much !

  Read the article

• Nvidia problem after inappropriate shut down

  - by bhappy

  Hi, After by battery died on my laptop I started my computer after plugging it to the ac adapter, for no reason that I know I cant use the visual effects any more as if my graphic card is not installed (my graphic card is GeForce 300m and nvidia x-settings is working) I tried generating a new xorg.conf file but nothing happened I marked all the installed nvidia driver in synaptic for re installation and didn't really help I googled the problem appears to be popular but couldn't find a solid solution Any Ideas ?

  Read the article

< Previous Page | 54 55 56 57 58 59 60 61 62 63 64 65  | Next Page >