Search Results

Search found 13047 results on 522 pages for 'np hard'.

Page 58/522 | < Previous Page | 54 55 56 57 58 59 60 61 62 63 64 65  | Next Page >

• Can't access my accelerated hard disk from msdos after installing linux on ssd cache

  - by Chibueze Opata

  I mistakenly installed Linux Mint on my ssd (forgot my PC actually came with one), when it detected a ~31GiB disk that it wanted to install to, I was a bit confused since I had brought out 30Gb in my primary disk for it, but I clicked continue. After installation, I tried to boot back into my Windows and it brought out some Intel Raid Disk Utility stuff saying I should disable acceleration on a disk something couldn't be found, I canceled it but whatever I tried, recovery tools, setups etc, I couldn't just access the drive which was apparently using the SSD as cache. Since then I've been stuck. I tried setting the 'raid' flag to the disk from 'gParted', still I couldn't. I tried the diskraid utility from windows recover disk, it said it couldn't detect any raid, diskpart sees the partition but doesn't see the volume, when I remove the raid flag, it sees the volume as one of raw type, and I can't access anything. I can however mount the drive from terminal in Mint and access my files, but I don't have any backup media at the moment so I can do a factory re-install. Please how do I go about solving the issue, precisely I would like to know how to boot into the drive again. Thanks!

  Read the article

• Populating a drive that was formated to ntsf on seperate computer

  - by Will Love

  I recently downloaded some files that were over 4gb and wouldnt do a straight transfer to a external hd. this is all being done on a serperate computer we shall call computer1. my computer(computer2) is where im trying to get the files too. i used cmd to "Soft format" the drive to NTSF on computer1 so i could then take the drive to transfer the files to computer2. this was suppose to allow the format change without losing the files i had on there already... after the proccess was done i checked the drive on computer1 and all the old files were there and working....when i took the drive back to computer2 to transfer the files i had just downloaded from computer2 my computer...computer1:wont reconize or populate the external drive so it can give it a drive letter and function. the external drive works fine on computer1, but how do i get it to work again on computer2? when i try to populate it, i cant access the properties function in order to make permissions for everyone so it is reconized....any help would be greatfull..... also i am running windows 7 ultimate edition if that helps.

  Read the article

• Cloning Win 7 installation from MBR to GPR drive and make it bootable

  - by Nelluk

  I've seen threads on similar topics - such as this one - but the answers never seem to solve how to make it bootable. I have Win 7 64-bit on a PC installed on a 2tb MBR volume. The motherboard is UEFI compatible. I just installed a secondary internal 3TB drive which will be partitioned as GPT. Is there a relatively easy way to clone my installation over to the new drive and have that drive be bootable? I have used EaseUS Partition Master to clone the C volume to the D volume, but that would not boot and I assume the issue is that one is MBR and one is GPT. Is there a process to do this?

  Read the article

• Burnt SATA Drive

  - by luvieere

  By stupid curiosity, I've connected the FDD power cable to the jumper pins of a SATA drive, and powered on the system. The SATA drive's controller burned out. What now? Can it be replaced, and still be able to read the disc?

  Read the article

• Would a Drobo benefit from TLER (Western Digital) or ERC (Seagate)?

  - by David Rubin

  Since Drobo's so-called "BeyondRAID" is analogous to a custom RAID 5 implementation, will using a drive with Time-Limited Error Recovery features enabled be of benefit to the Drobo array? I haven't been able to find any information in the Drobo knowledgebase.

  Read the article

• Can't restore HDD using multiple programs

  - by jonney

  Please refer to my original question about this issue. I tried GetDataBack and it doesn't seem to scan or do anything. I chose the default settings from the first screen and then on step 1 I chose my HDD that's damaged. In step 2, nothing happens. It doesn't scan or do anythong, and on step 3 it doesn't display any of my files. I have also tried TestDisk and what happens in TestDisk is that when I try to fix and rebuild the MFT, it says this: MFT and MFT mirror are bad. Failed to repair them. Here is the status of that HDD under Testdrive: I also tried this app and got no results when I tried to recover the files. I keep getting this error: Last but not least, I tried Recuva and that simply says it's unable to read the MFT. Any suggestions? I have tried various apps already and none of them seems to work.

  Read the article

• Windows xp recovery console without Ntfs.sys? (0x00000024 BSOD)

  - by Kalle

  I have two physical disks in a computer, for simlicity lets call them C and D. C: got Windows XP and D: got some data. The problem is that whenever i have D: connected i can't boot windows. I get some BSOD called 0x00000024/NTFS_FILE_SYSTEM. Same thing if i boot up windows with D: disconnected and then connect it once windows has loaded. The KB article about this problem says that i have to run chkdsk but i can't get to somewhere where i can run this because i get a BSOD whenever the disk is connected! Even the recovery-console BSODs if D: is connected. The final option in the KB is to boot the computer on Windows 2000 Setup disks where you edit some file to manually disable the ntfs.sys driver and then run chkdsk. The problem is that i don't have any floppy drive. Is there any way to boot the built in recovery console with ntfs.sys disabled or to burn the floppy version to a cd after you've extracted and modified it on the harddrive? Right now the Windows xp bootable floppy creator(2) is asking me which floppy drive to extract to which i can't answer because i have none :/ Other solutions to the root problem is also appreciated :) (2) ht tp://www.microsoft.com/downloads/details.aspx?FamilyID=55820edb-5039-4955-bcb7-4fed408ea73f&displaylang=en

  Read the article

• Is it worth putting high-performance drives in a home NAS?

  - by Jon M

  I'm looking at a QNAP NAS setup, and in the options for disks they have the very enterprisey Western Digital RE3. I'll be using the box for backing up my laptop, and streaming media either to the laptop or a media device using the built-in media server, possibly both at once. My question is, would I notice any benefit at all in splashing out for the high-performance drive, or should I stick with something quiet and cool (and cheap) like the Caviar Green?

  Read the article

• 2 drives, slow software RAID1 (md)

  - by bart613

  Hello, I've got a server from hetzner.de (EQ4) with 2* SAMSUNG HD753LJ drives (750G 32MB cache). OS is CentOS 5 (x86_64). Drives are combined together into two RAID1 partitions: /dev/md0 which is 512MB big and has only /boot partitions /dev/md1 which is over 700GB big and is one big LVM which hosts other partitions Now, I've been running some benchmarks and it seems like even though exactly the same drives, speed differs a bit on each of them. # hdparm -tT /dev/sda /dev/sda: Timing cached reads: 25612 MB in 1.99 seconds = 12860.70 MB/sec Timing buffered disk reads: 352 MB in 3.01 seconds = 116.80 MB/sec # hdparm -tT /dev/sdb /dev/sdb: Timing cached reads: 25524 MB in 1.99 seconds = 12815.99 MB/sec Timing buffered disk reads: 342 MB in 3.01 seconds = 113.64 MB/sec Also, when I run eg. pgbench which is stressing IO quite heavily, I can see following from iostat output: Device: rrqm/s wrqm/s r/s w/s rsec/s wsec/s avgrq-sz avgqu-sz await svctm %util sda 0.00 231.40 0.00 298.00 0.00 9683.20 32.49 0.17 0.58 0.34 10.24 sda1 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 sda2 0.00 231.40 0.00 298.00 0.00 9683.20 32.49 0.17 0.58 0.34 10.24 sdb 0.00 231.40 0.00 301.80 0.00 9740.80 32.28 14.19 51.17 3.10 93.68 sdb1 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 sdb2 0.00 231.40 0.00 301.80 0.00 9740.80 32.28 14.19 51.17 3.10 93.68 md1 0.00 0.00 0.00 529.60 0.00 9692.80 18.30 0.00 0.00 0.00 0.00 md0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 dm-0 0.00 0.00 0.00 0.60 0.00 4.80 8.00 0.00 0.00 0.00 0.00 dm-1 0.00 0.00 0.00 529.00 0.00 9688.00 18.31 24.51 49.91 1.81 95.92 Device: rrqm/s wrqm/s r/s w/s rsec/s wsec/s avgrq-sz avgqu-sz await svctm %util sda 0.00 152.40 0.00 330.60 0.00 5176.00 15.66 0.19 0.57 0.19 6.24 sda1 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 sda2 0.00 152.40 0.00 330.60 0.00 5176.00 15.66 0.19 0.57 0.19 6.24 sdb 0.00 152.40 0.00 326.20 0.00 5118.40 15.69 19.96 55.36 3.01 98.16 sdb1 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 sdb2 0.00 152.40 0.00 326.20 0.00 5118.40 15.69 19.96 55.36 3.01 98.16 md1 0.00 0.00 0.00 482.80 0.00 5166.40 10.70 0.00 0.00 0.00 0.00 md0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 dm-0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 dm-1 0.00 0.00 0.00 482.80 0.00 5166.40 10.70 30.19 56.92 2.05 99.04 Device: rrqm/s wrqm/s r/s w/s rsec/s wsec/s avgrq-sz avgqu-sz await svctm %util sda 0.00 181.64 0.00 324.55 0.00 5445.11 16.78 0.15 0.45 0.21 6.87 sda1 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 sda2 0.00 181.64 0.00 324.55 0.00 5445.11 16.78 0.15 0.45 0.21 6.87 sdb 0.00 181.84 0.00 328.54 0.00 5493.01 16.72 18.34 61.57 3.01 99.00 sdb1 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 sdb2 0.00 181.84 0.00 328.54 0.00 5493.01 16.72 18.34 61.57 3.01 99.00 md1 0.00 0.00 0.00 506.39 0.00 5477.05 10.82 0.00 0.00 0.00 0.00 md0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 dm-0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 dm-1 0.00 0.00 0.00 506.39 0.00 5477.05 10.82 28.77 62.15 1.96 99.00 And this is completely getting me confused. How come two exactly the same specced drives have such a difference in write speed (see util%)? I haven't really paid attention to those speeds before, so perhaps that something normal -- if someone could confirm I would be really grateful. Otherwise, if someone have seen such behavior again or knows what is causing such behavior I would really appreciate answer. I'll also add that both "smartctl -a" and "hdparm -I" output are exactly the same and are not indicating any hardware problems. The slower drive was changed already two times (to new ones). Also I asked to change the drives with places, and then sda were slower and sdb quicker (so the slow one was the same drive). SATA cables were changed two times already.

  Read the article

• Western Digital My Book World drops off network

  - by Macha

  Most of my storage in my house relies on a WD My Book World Edition 500GB network drive. I threw out the vendor crapware they give you to access it (a trial version of Mionet) after it starting nagging me to upgrade, and set it up as a standard network drive using Window's Map Network Drive. However, since then, it has been dropping off the network after 30 minutes of non-usage. The only way to get it back on is to switch it off and on again at the plug socket. Does anyone know what is causing this, and hopefully how to fix it? EDIT: it's the original "blue rings" version with the latest firmware.

  Read the article

• Windows 7 System process reading/writing like crazy

  - by Mats Ekberg

  I have a problem that my windows 7 computer sometimes starts accessing the disk like crazy for maybe 10 minutes at a time. The process in question is the "system" process. I have disabled superfetch and hibernation on my computer, if that makes any difference. I disabled those to see if they were the cause of the problems, but no change. I have 6 GB of RAM and only the web browser was started when I took the screenshot, so I don't think it was thrashing due to page faults. Any ideas on how to find the cause of this?

  Read the article

• Rocketfish Driver

  - by darthg8r

  I've got a RocketFish SATA enclosure, model number RF-AHD35. It has a card reader on it. Windows doesn't see the card reader. I figure it's a driver problem. But, I don't have the CD that came with it anymore, nor is it available from their site. As a matter of fact, their site looks like my 8 year old made it. Does anyone have access to this driver?

  Read the article

• How do you create a VHD in Windows Virtual PC (Win 7) that is linked to a real physical drive?

  - by Clay Nichols

  I know that you can create a Virtual HD in Virtual PC that is linked to a physical drive so it's not compressed, runs faster, etc. I'm now using Windows 7 and I don't see any way to create such a VHD. Only options are Dynamic, Fixed, Differencing. Any ideas?

  Read the article

• Installing Windows 7 upgrade version on a clean disk

  - by BobMarley

  Is it possible to install the much cheaper Windows 7 upgrade version on a clean disk? What information will I need? 1) Will the Windows 7 installer ask me for my XP license key? or 2) Will the Windows 7 installer only run if it can detect an existing XP installation? Furthermore, what will happen if my disk crashes and I need to reinstall in the future? Will I need my XP license key again?

  Read the article

• All my folders and files on my flash drive have been renamed automatically and I can no longer open them... I need those files

  - by jennifer

  I opened up my flash drive this morning and all of my folders and files are normal, except for one folder and all its included files, which is the most important folder. The subfolders and files are renamed with bizarre characters and when I click to open them, a pop-up appears saying it's not accessible and the filename or directory name is incorrect. I don't want to reformat the flash drive because I'd lose all those files. Is there a way for me to restore it or something? I would attach a screen shot, but apparently new users do not have that privilege. If you have a vague idea of what I'm talking about, let me know and I can email you screenshots so you can have a better understanding. Any help is greatly appreciated!

  Read the article

• File Saving Sometimes Fails

  - by YellPika

  When I attempt to save files, it sometimes (randomly) fails. In Blender, I sometimes get "Version Backup Failed: File Saved With @". In Visual Studio, building sometimes fails with an error message indicating that the target file/exe cannot be overwritten. If I wait a bit, I can save fine. It's almost as if programs are taking an abnormal amount of time to 'let go' of the files. What could be causing this behaviour? This seems to be caused by Windows Live Mesh monitoring my files, and locking them whenever it uploads the new versions (BAD considering the amount of times I save my files, even redundantly). Any suggestions to work around this behaviour? Should I switch to a better service to sync my files?

  Read the article

• What is the S.M.A.R.T. page?

  - by Mads Skjern

  I've just listened to Steve Gibson talk about his SpinRite software, on the Security Now podcast episode 336 (transscript). At 33:20 he says: I can show and do show on the SMART page that sectors are being relocated and that errors are being corrected. That SMART analysis page sometimes scares people because it shows, wait a minute, this thing says we're correcting so many errors per megabyte. What is this SMART page? 1) Some information saved on the HD by SMART, that I can access with a SMART tool like smartmontools? 2) A page (tab) in his SpinRite software? In any case, can I see, in any way, what sectors are marked as bad, without using SpinRite? Preferably using smartmontools!

  Read the article

• Why does storage's performance change at various queue depths?

  - by Mxx

  I'm in the market for a storage upgrade for our servers. I'm looking at benchmarks of various PCIe SSD devices and in comparisons I see that IOPS change at various queue depths. How can that be and why is that happening? The way I understand things is: I have a device with maximum (theoretical) of 100k IOPS. If my workload consistently produces 100,001 IOPS, I'll have a queue depth of 1, am I correct? However, from what I see in benchmarks some devices run slower at lower queue depths, then speedup at depth of 4-64 and then slow down again at even larger depths. Isn't queue depths a property of OS(or perhaps storage controller), so why would that affect IOPS?

  Read the article

• My C disk show 33gb less space then i have bcs of hidden or encrypted files i cant find

  - by Peter

  Hello I was hoping some one could help me my drive has 92gbs used space, 95gbs free out of 220 partition 33gbs in the air i cant find, already did cleanup, emptied recycle bin, history and temp files also and I believe sin Ive seen before its possibly space my brother used with a program he uses to hide (possibly encrypted) files dont know the name just seen him do it on usb and pc dont appear visible or hidden and result is what you read above is there any way of finding them to delete them hence my brother is nowhere to b found or could it be something else??? already tried freecommander also.

  Read the article

• Merging free space of hard drive to primary partition

  - by Dibya Ranjan

  I have purchased a new HDD, I tried to format making 1 primary partition, I converted the rest unallocated space to extended partition then to logical drive now I have 3 logical drives. I feel that the size allocated to the primary partition is less so I used shrink option to the 3 logical partitions in diskmgmt but each partition is resulting in one memory block of Free space. Now I want to merge these free spaces to my primary partition.

  Read the article

• Linux DD command partition -to- partition

  - by Ben Jackson

  I just used the DD command to copy the contents of one partition over to another partition on another drive, like this: dd if=/dev/sda2 of=/dev/sdb2 bs=4096 conv=noerror sda2 partition was 66GB and sdb2 was 250GB. I read that by doing this the extra space on the drive I am copying to will be wasted, is this true? I wasn't worried about loosing the extra space for the time being however, I just ran: sudo kill -USR1 (PID) to view the current status of DD and it has written over 66GB of data, will it continue to write data until it gets to 250GB? If so, is there a way to stop the process without corrupting it as waiting for it to write blank space seems like a waste of time.

  Read the article

• windows 8.1 does not boot after CHKDSK command

  - by sepehr

  I had problem with Windows 8.1 high Disk usage so in order to solve , searched forums. A voted answer suggested to use CHKDSK command as follow: run command prompt and as administrator type code snippet below: CHKDSK /f /v /b C: (I can not remember accurately) CHKDSK printed : can not run CHKDSK right now , would you like to schedule C drive to be checked next time windows starts? (Y/N) my response was "Y" ,please ! Following this suggestion not only didn't solve my problem as expected but also added another one ! The next time system booted, after windows authentication I just could see a black screen and mouse pointer. So I force shut downed the system and tried to start windows again. This time , windows got stuck in Scanning and Repairing on 22% for around 3 hours so I got tired and forced shut downed again. is CHKDSK source of Scanning and Repairing problem or they are discrete ? is there any hope to overcome this problem without re-installing windows ? can any one else run CHKDSK on newer versions of windows without problem? is CHKDSK effective but inefficient ?(it finally get to end but will take a long time) If yes, how much time does it take? I also have Linux Ubuntu 14.04 installed along side windows.

  Read the article

• How to configure SCSI hard drives and RAID for Poweredge 2850 web server

  - by Saul

  I'm trying to set up a Poweredge 2850 as a web server, but as a server novice it's causing me some confusion. Its a virgin install so no data to be lost as yet, so I'd like to get the best arrangement for setting up Windows Server 2008. The box will run IIS, a mail and FTP server. The current physical arrangement of the hot swap drives is 1 73GB 3 146GB 5 blank 0 73GB 2 146GB 4 146GB (but flashes green, amber off) When I enter the PERC config screens on boot up I've got Raid Ch- 0 ID 0 ONLIN A00-00 1 ONLIN A00-01 2 ONLIN A01-00 3 ONLIN A01-01 4 HOTSP I think that drives 0 and 1 are set to RAID 1 and drives 2 and 3 are also set to RAID 1, certainly I can see 2 logical drives, both raid 1 of 69880MB and 139900MB Now what I think I am getting here is that the 2 73GB drives mirror each other and the 2 146GB drives mirror 2? so by my noob thinking if a drive fails I can pull it, insert and new one and it will reduplicate from its matching pair? I think the flashing amber probably indicates a failing drive in slot 4, should that just be binned? What confuses me coming from a home user XP background is that when I load up Windows Server 2008 OS under my computer I only see a C drive of about 70GB capacity. i.e wheres the 146GB drive? Any advice appreciated

  Read the article

• New power supply and now HDDs are not recognized.

  - by Michael

  So I upgraded to a new X4 ULTRA power supply that was recommended to me by a local TigerDirect store. After installing it along with a new liquid cooling system, I booted it up and it automatically fried my CD Drive. After that I noticed that the OS wouldn't start and figured out that none of the 4 HDDs in my computer were being recognized by the BIOS. I feel them spool at a steady pace and have tried new cables and connections but to no avail. I triple checked all of the connections and cables and have no idea what is wrong. This isn't the first time I changed a PS or CPU cooling system but I am at a dead end. Any ideas, aside from buying a USB HDD reader and seeing if they are all fried? Also, this is a stock Gateway mobo with the mobo USB connections already dead. Could the new PS have fried the SATA connections??

  Read the article

• Macbook Pro won't boot from DVD with SSD

  - by Adam Carr

  Here's the timeline of events. Had a running MBP 17 Early 2011 Thunderbolt with OWC Mercury Extreme Pro SSD 115GB drive. Installed Windows 7 via bootcamp. I have done this multiple times before and every time I need to format the bootcamp partition before installing. I think this time I actually deleted the partition and then selected the freespace to install. This worked fine for the most part but I wasn't able to boot the boot camp partition using vmware fusion. I gave up and used the boot camp assistant to revert back to one mac partition. I was getting some odd behavior so I rebooted the machine. It then came up with a message saying no bootable partiton. This made me think (and still does) that the windows install using the free space versus the boot camp partition caused the windows MBR boot loader to get installed incorrectly and mucked up the OS X installation. Ok, fine, I can just reinstall. I can't seem to boot from the original MBP installation DVD. I hold down c on boot but I never get past the all grey screen. I hear the DVD drive spin up but it eventually stops. I put the original HD back in it and everything works fine but when I put the SSD in, I can't boot from the DVD drive. I have already set up an RMA with OWC to send back the drive but considering the order of events, I feel as though it isn't a hardware issue but can't seem to figure out how to fix it. I can always send it back in but figured I would check and see if anyone could offer some guideance/assistence before doing so.

  Read the article

< Previous Page | 54 55 56 57 58 59 60 61 62 63 64 65  | Next Page >