Search Results

Search found 1568 results on 63 pages for 'opt'.

Page 58/63 | < Previous Page | 54 55 56 57 58 59 60 61 62 63  | Next Page >

• Vim hanging after parsing .vimrc (even a blank one) file on Solaris 10

  - by Seamus

  Hello all, I am having a problem with vim 7.2 hanging (for about 10 seconds) after it parses the .vimrc file. I had a similar issue in the past with tcsh on linux, but it was resolved by setting TERM to xterm-color. The same does not resolve the issue here. Any idea what may be causing this? $ env USER=redacted LOGNAME=redacted HOME=/home/redacted PATH=redacted MAIL=/var/spool/mail/redacted SHELL=/bin/tcsh TZ=redacted LC_COLLATE=C SSH_CLIENT=redacted SSH_CONNECTION=redacted SSH_TTY=/dev/pts/11 TERM=dtterm HOSTTYPE=sun4 VENDOR=sun OSTYPE=solaris MACHTYPE=sparc SHLVL=1 PWD=/home/redacted GROUP=redacted HOST=redacted REMOTEHOST=redacted QUOTA_CHECKED=1 WHOAMI=redacted HOSTNAME=redacted EDITOR=vim PRINTER=redacted INFOPATH=/software/gnu/gcc/2.8.1/sun4os5.10/info:/software/gnu/sun4os5/info:/software/gnu/emacs/20.3.1/sun4os5/info:/software/gnuish/sun4os5/info:/usr/local/gnu/info MANPATH=/software/gnu/gcc/2.8.1/sun4os5.10/man:/software/gnu/sun4os5/man:/software/gnu/emacs/20.3.1/sun4os5/man:/opt/rational/clearcase/doc/man:/usr/openwin/man:/usr/share/man:/usr/local/man:/usr/dt/man:/software/gnuish/sun4os5/man H_ARCH=sun4 H_ARCHOS=sun4os5 H_ARCHOS_SUB=sun4os5.10 H_OSTYPE=SUNOS H_OSREV=51000 T_ARCH=sun4 T_ARCHOS=sun4os5 T_ARCHOS_SUB=sun4os5.10 T_OSTYPE=SUNOS T_OSREV=51000 X11HOME=/usr/local/x11/sun4os5 OPENWINHOME=/usr/openwin LD_LIBRARY_PATH=/usr/dt/lib:/usr/openwin/lib MOTIFHOME=/usr/dt XINITRC=/usr/openwin/lib/Xinitrc GCC_REV=281

  Read the article

• Block facebook from my website

  - by Joseph Szymborski

  I have a secure link direction service I'm running (expiringlinks.co). If I change the headers in php to redirect my visitors, then facebook is able to show a preview of the website I'm redirecting to when users send links to one another via facebook. I wish to avoid this. Right now, I'm using an AJAX call to get the URL and javascript to redirect, but it's causing problems for users who don't use javascript. Here are a number of ways I'd like to block facebook, but I can't seem to get working: I've tried blocking the facebook bot (facebookexternalhit/1.0 and facebookexternalhit/1.1) but it's not working, I don't think they're using them for this functionality. I'm thinking of blocking the facebook IP addresses, but I can't find all of them, and I don't think it'll work unless I get all of them. I've thought of using a CAPTCHA or even a button, but I can't bring myself to do that to my visitors. Not to mention I don't think anyone would use the site. I've searched the facebook docs for meta tags that would "opt-me out", but haven't found one, and doubt that I would trust it if I had. Any creative ideas or any idea how to implement the ones above? Thank you so much in advance!

  Read the article

• Unsupported smapling rate in flex/actionscript

  - by Rajeev

  In action script i need Loading configuration file /opt/flex/frameworks/flex-config.xml t3.mxml(10): Error: unsupported sampling rate (24000Hz) [Embed(source="music.mp3")] t3.mxml(10): Error: Unable to transcode music.mp3. [Embed(source="music.mp3")] The code is <?xml version="1.0"?> <!-- embed/EmbedSound.mxml --> <mx:Application xmlns:mx="http://www.adobe.com/2006/mxml"> <mx:Script> <![CDATA[ import flash.media.*; [Embed(source="sample.mp3")] [Bindable] public var sndCls:Class; public var snd:Sound = new sndCls() as Sound; public var sndChannel:SoundChannel; public function playSound():void { sndChannel=snd.play(); } public function stopSound():void { sndChannel.stop(); } ]]> </mx:Script> <mx:HBox> <mx:Button label="play" click="playSound();"/> <mx:Button label="stop" click="stopSound();"/> </mx:HBox> </mx:Application>

  Read the article

• What is the benefit of using ONLY OpenID authentication on a site?

  - by Peter

  From my experience with OpenID, I see a number of significant downsides: Adds a Single Point of Failure to the site It is not a failure that can be fixed by the site even if detected. If the OpenID provider is down for three days, what recourse does the site have to allow its users to login and access the information they own? Takes a user to another sites content and every time they logon to your site Even if the OpenID provider does not have an error, the user is re-directed to their site to login. The login page has content and links. So there is a chance a user will actually be drawn away from the site to go down the Internet rabbit hole. Why would I want to send my users to another company's website? [ Note: my provider no longer does this and seems to have fixed this problem (for now).] Adds a non-trivial amount of time to the signup To sign up with the site a new user is forced to read a new standard, chose a provider, and signup. Standards are something that the technical people should agree to in order to make a user experience frictionless. They are not something that should be thrust on the users. It is a Phisher's Dream OpenID is incredibly insecure and stealing the person's ID as they log in is trivially easy. [ taken from David Arno's Answer below ] For all of the downside, the one upside is to allow users to have fewer logins on the Internet. If a site has opt-in for OpenID then users who want that feature can use it. What I would like to understand is: What benefit does a site get for making OpenID mandatory?

  Read the article

• Performance of Multiple Joins

  - by geeko

  Greetings Overflowers, I need to query against objects with many/complex spacial conditions. In relational databases that is translated to many joins (possibly 10+). I'm new to this business and wondering whether to go with MS SQL Server 2008 R2 or Oracle 11g or document-based solutions such as RavenDB or simply go with some spacial database (GIS)... Any thoughts ? Regards UPDATE: Thank you all for your answers. Would anybody opt for document/spatial databases ? My database would consist of tens of millions to few billion records. Mostly read-only. Almost no updates unless in case of mistakes in input. Overnight inserts and not that frequent. The join tables are predicted beforehand but the number of self joins (tables joining themselves multiple times) is not. Small pages of results from such queries are going to be viewed on an highly interactive website so response time is critical. Any predictions on how this can perform on MS SQL Server 2008 R2 or Oracle 11g ? I'm also concerned about boosting performance by adding more servers, which one scales better ? How about PostgresQL ?

  Read the article

• How do you fix loading plugins in eclipse 3.5.1 on linux?

  - by Jay R.

  I have two linux boxes. Both Fedora 11 x64. On one, I downloaded the eclipse-java-galileo-SR1-linux-gtk-x86_64.tar.gz. I unpacked it to /opt/eclipse-3.5.1/ and used the Install New Software... item to install the SVN team provider and the Polarion SVN connectors. Everything works. On the second, I copied the tar.gar for eclipse there, and then tried to follow the same steps. When I get to the install SVN team provided, eclipse downloads it and claims to install it and asks to restart. I restart and there is no SVN support. The software installer knows its there because I can't reinstall it without uninstalling it. So the questions: Why isn't the plugin/feature loading for the SVN Team Support? Is there a checkbox that I forgot about that enables the plugin? Is there a command line option that will force reload all of the features on the disk? I've tried to install other things like findbugs, but I get the same result. I have no messages in the log file indicating an exception or anything like that.

  Read the article

• figuring out which field to look for a value in with SQL and perl

  - by Micah

  I'm not too good with SQL and I know there's probably a much more efficient way to accomplish what I'm doing here, so any help would be much appreciated. Thanks in advance for your input! I'm writing a short program for the local school high school. At this school, juniors and seniors who have driver's licenses and cars can opt to drive to school rather than ride the bus. Each driver is assigned exactly one space, and their DLN is used as the primary key of the driver's table. Makes, models, and colors of cars are stored in a separate cars table, related to the drivers table by the License plate number field. My idea is to have a single search box on the main GUI of the program where the school secretary can type in who/what she's looking for and pull up a list of results. Thing is, she could be typing a license plate number, a car color, make, and model, someone driver's name, some student driver's DLN, or a space number. As the programmer, I don't know what exactly she's looking for, so a couple of options come to mind for me to build to be certain I check everywhere for a match: 1) preform a couple of SELECT * FROM [tablename] SQL statements, one per table and cram the results into arrays in my program, then search across the arrays one element at a time with regex, looking for a matched pattern similar to the search term, and if I find one, add the entire record that had a match in it to a results array to display on screen at the end of the search. 2) take whatever she's looking for into the program as a scaler and prepare multiple select statements around it, such as SELECT * FROM DRIVERS WHERE DLN = $Search_Variable SELECT * FROM DRIVERS WHERE First_Name = $Search_Variable SELECT * FROM CARS WHERE LICENSE = $Search_Variable and so on for each attribute of each table, sticking the results into a results array to show on screen when the search is done. Is there a cleaner way to go about this lookup without having to make her specify exactly what she's looking for? Possibly some kind of SQL statement I've never seen before?

  Read the article

• How does one force construction of a global object in a statically linked library? [MSVC9]

  - by Peter C O Johansson

  I have a global list of function pointers. This list should be populated at startup. Order is not important and there are no dependencies that would complicate static initialization. To facilitate this, I've written a class that adds a single entry to this list in its constructor, and scatter global instances of this class via a macro where necessary. One of the primary goals of this approach is to remove the need for explicitly referencing every instance of this class externally, instead allowing each file that needs to register something in the list to do it independently. Nice and clean. However, when placing these objects in a static library, the linker discards (or rather never links in) these units because no code in them is explicitly referenced. Explicitly referencing symbols in the compilation units would be counterproductive, directly contradicting one of the main goals of the approach. For the same reason, /INCLUDE is not an acceptable option, and /OPT:NOREF is not actually related to this problem. Metrowerks has a __declspec directive for it, GCC has -force_load, but I cannot find any equivalent for MSVC.

  Read the article

• problem with joomla, php and json

  - by sebastian

  hi, i have a problem with a joomla component. i'm, unsing php and json for some dynamic drop down boxes. here is the code:` jQuery( function () { //jQuery.ajaxSetup({error : function (a,b) {console.dir(a); console.dir(b);}}); jQuery("#util, #loc").change( function() { var locatie = jQuery("#loc").val(); var utilitate = jQuery("#util").val(); if ( (locatie!= '---') && (utilitate!='---') ) jQuery.getJSON( "index.php?option=com_calculator&opt=json_contor&format=raw", { locatie: locatie, utilitate: utilitate }, function (data) { var html = ""; if ( data.success == 'ok' ) for (var i in data.val) html += "<option name=den_contor value ='"+ i+"' >" + data.val[i]+ " </option>"; jQuery("#den_contor").html( html ) } ) }) }); the query works, but only on one PC. we have exactly the same xampp server, exactly the same files. on one pc it works, and on a online server and on my pc it doesn't. EDIT: i have three drop down boxes, the first is populated directly from the database, the second has 4 predefined values. and the third is populated depending on combination of the first two. i have a test site online. http://contor.redxart.com must be logged in to use Calculator in the menu. you can make an new account :) "Adaugare Index" is the part that isn't working any ideas? thanks, sebastian

  Read the article

• Problem prompting user for extended permissions using showPermissionDialog in FB page tab

  - by snipe

  I have an FBML app that will use the tab as a promo tab before the full app goes live. The purpose of the promo tab is to allow users to opt in to email notifications (using the FB API sendNotifications call), so I need to prompt them to allow the app and grant extended permissions on that promo tab. The tab code is: <?php require_once 'config.php'; ?> <form id="form1"> <h1> <a href="#" clickrewriteform="form1" clickrewriteurl="http://www.mydomain.com/fanpageajax/result.php" clickrewriteid="allowapp">Step 1. Allow the Application</a> </h1> <div id="allowapp"></div> </form> <h1><a onclick="Facebook.showPermissionDialog('email');return false;"> Step 2. Grant extended permissions (intab)</a></h1> The result.php page just tags the API to ensure the allow prompt will show up. The problem is with the Step 2. Once the user has allowed the app, and they click on the Step 2, nothing happens. If they click on it twice, THEN the extended permissions dialog box popups up, but it asks them to grant extended permissions TWICE. OR.... If the user clicks on Step 1, and allows the app, and then reloads the fan page tab, they only have to click on the Step 2 link once, and the permissions show up. Anyone have any ideas? I have been beating myself in the head over this for hours.

  Read the article

• Provider not notified from cookbook_file

  - by wittyhandle

  I'm working on an ssl provider using Vagrant (1.0.5) and chef-solo (10.12.0) I have my provider, called ssl within a cookbook called gtm_cq, I define it as such in my cookbook's default recipe: gtm_cq_ssl "author" do # attributes will come later end I then have my cookbook_file like below that should notify my ssl provider's import action once it pushes the cert up to the server: cookbook_file "#{node[:cq][:ssl][:author_cert_location]}/foo.cer" do source "foo.cer" owner "crx" group "root" mode "0644" notifies :import, resources(:gtm_cq_ssl => "author") end When I run this, the foo.cer gets pushed up as expected, but the import action of my ssl provider is never called. The most I see of any reference is these couple of lines in the log (removed log headers): .. cookbook_file[/opt/cq5/author/foo.cer] sending import action to gtm_cq_ssl[author] (delayed) .. Processing gtm_cq_ssl[author] action import (gtm_cq::author line 34) There's a large very obvious log statement as well as the use of another cookbook_file for a test file to push something up to the server. No log statement, no test file pushed. I'm certain too that the foo.cer file is removed from the server before each test. I found that if I edit my notifies line like so with :immediately notifies :import, resources(:gtm_cq_ssl => "author"), :immediately It seems to work. And I suppose this is ok in my particular case, but it would seem something is not right if that's the only way I can call my provider. Any help on this would be greatly appreciated. Thanks!

  Read the article

• Are there really safe and legal resources for sound effects to use in applications?

  - by mystify

  For those who want to opt for "close" immediately: Great user interfaces need great sound effects, right? User interfaces are programmed by programmers, right? So this is a programming question, ok? I had a very hard time to find good and legal sound resources. I am not looking for free sounds. Proper licensing is absolutely crucial, and I don't want to get sued by multibilliondollar music companies, hollywood sound studios and their highly overpaid lawyers. They cry about people downloading their stuff in file sharing sites but when someone comes and wants to really license stuff, the market is so empty like an open and unwatched gold mine. Trust me, whatever I type into google, I always end up getting sort of opaque and strange music libraries that do charge money, but refuse to provide proper licensing evidence to the licensee. When you pay money and they only count how many files you downloaded, that can never be a valid license, nor any evidence for you that you did license the sounds. Imagine that contributor suing you and you say: "I licensed it at xy", and his lawyer just smiles: "Show me proof, mofo!". So you loose a million dollars, or 1 for every downloaded app. Congrats. But that's the way all those "hey we're the worlds largest sound effect library" libraries are doing it. It's really annoying. And I hope someone here is able to point out a sound effects ressource which is A) big B) used by professinals C) has a reasonable pricing and licensing model D) provides the licensee with proper legal evidence about licensed sounds You know, I'm not from the US and typically you US folks are the ones who invent the cool stuff on the net, and maybe I just missed a new great start up. So?

  Read the article

• Nginx Rails app can't deploy

  - by user3596718

  I have an issue with my rails application running with passenger and nginx hosted in Ubuntu 12.04. In the nginx.conf file below, my "example.com" (Regular HTML) and "redmine.example.com" (Rails app) are working perfectly, but my "crete.example.com" (Another Rails app) is showing "502 bad gateway". I have them both hosted in /var/data with the same permissions and ownerships, also tried different ports, I can't think of something else to try. worker_processes 1; events { worker_connections 1024; } http { passenger_root /usr/lib/ruby/vendor_ruby/phusion_passenger/locations.ini; include mime.types; default_type application/octet-stream; sendfile on; keepalive_timeout 65; server{ listen 80; server_name example.com; root /opt/nginx/html; } server{ server_name redmine.example.com; root /var/data/redmine/public; passenger_enabled on; location ~ ^/<SUBURI>(/.*|$){ alias /var/data/redmine/public$1; passenger_base_uri /redmine; passenger_app_root /var/data/redmine; passenger_document_root /var/data/redmine/public; passenger_enabled on;} } server{ server_name crete.example.com; root /var/data/crete/public; passenger_enabled on; location ~ ^/<SUBURI>(/.*|$){ alias /var/data/crete/public$1; passenger_base_uri /crete; passenger_app_root /var/data/crete; passenger_document_root /var/data/crete/public; passenger_enabled on;} } } This are my Ruby and Rails versions: ruby 2.0.0p451 (2014-02-24 revision 45167) [x86_64-linux] Rails 4.1.0 My nginx error.log 2014/05/02 12:29:50 [error] 3343#0: *4 upstream prematurely closed connection while reading response header from upstream, client: xxx.xx.xx.xx, server: crete.example.com, request: "GET / HTTP/1.1", upstream: "passenger:/tmp/passenger.1.0.3 323/generation-0/request:", host: "crete.example.com" Any other conf file you might need to solve this don't hesitate to ask.

  Read the article

• jQuery trigger custom event synchronously?

  - by Miguel Angelo

  I am using the jQuery trigger method to call an event... but it behaves inconsistently. Sometimes it call the event, sometimes it does not. <a href="#" onclick=" $(this).trigger('custom-event'); window.location.href = 'url'; return false; ">text</a> The custom-event has lots of listeners added to it. It is as if the trigger method is not synchronous, allowing the window.location.href be changed before executing the events. And when window.location.href is changed a navigation occurs, interrupting everything. How can I trigger events synchronously? Using jQuery 1.8.1. Thanks! EDIT I have found that the event, when called has a stack trace like this: jQuery.fx.tick (jquery-1.8.1.js:9021) tick (jquery-1.8.1.js:8499) jQuery.Callbacks.self.fireWith (jquery-1.8.1.js:1082) jQuery.Callbacks.fire (jquery-1.8.1.js:974) jQuery.speed.opt.complete (jquery-1.8.1.js:8991) $.customEvent (myfile.js:28) This proves that jQuery trigger method is asynchronous. Oohhh my... =\

  Read the article

• java.awt -- when java outputs an image to my monitor (screen), where is the file that is output to the monitor card?

  - by user1405870

  Suppose that I am drawing a set of images using java graphics objects. Suppose that I java is outputting these images to my monitor. Where is the file or files that are sent to the monitor card (the graphical representation files). How can I take this file and save it to disk, or how can I take this file and write it to an array, or how can I take these files and combine the results of their output (to the monitor) into a single file for saving? I don't want to use a screen shot feature, I want to be able to redirect (xor capture also) the output to the monitor to some sort of byte-stream. I note that monitors are much better than semaphores, when you are talking about display capabilities; I don't need a counter example. I might not be asking the correct question. It might be that I want to capture the file while it is still in User Space, before it is put into 'Device Space'. I would like to try and capture the byte stream so that I can convert it to MPEG-4 format. I either need a streaming output from the MPEG-4 converter, coming from the streaming input, or else, I need to take static images at discrete times and convert the images. What format will the output from User Space be in? What format will the Device Space output be in? Try to keep speculation to a minimum. http://docs.oracle.com/javame/config/cdc/opt-pkgs/api/jsr927/index.html I guess that Java has made a means of displaying AWT objects on a television screen. Thank you. Ryan Zoerner

  Read the article

• Install MegaCli to Monitor Perc 5/i in Nexentastor 3

  - by Peter Valadez

  I have a Dell 2950 with a Perc 5/i Raid controller that we've already installed Nexentastor 3 Community Edition on. We setup a raid-10 array that and put a ZFS pool on top of the hardware. As I understand, in this configuration ZFS/Nexentastor will not be able to tell when a disk fails in the array. Obviously, this is not optimal. Since the Dell Perc 5/i controller is a rebranded LSI controller, you should be able to use the MegaCli utility to manage the array and monitor its condition. I had seen in a separate forum that the Perc 5/i is very similar to the LSI MegaRAID 8480E, so I tried installing the MegaCli utility at the link below. However, I have not been able to successfully install the utility. http://www.lsi.com/support/products/Pages/MegaRAIDSAS8480E.aspx Here is what happened when I tried to install MegaCli: root@Nexenta2:/files# pkgadd -d MegaCli.pkg Warning: unable to relocate '$BASEDIR' mv: cannot move `solmegacli-8.02.16/' to a subdirectory of itself, `solmegacli-8.02.16//var/lib/dpkg/alien/solmegacli/reloc/solmegacli-8.02.16' mv: cannot move `solmegacli-8.02.16/' to a subdirectory of itself, `solmegacli-8.02.16//opt/solmegacli-8.02.16' 822-date: warning: This program is deprecated. Please use 'date -R' instead. 822-date: warning: This program is deprecated. Please use 'date -R' instead. solmegacli_8.02.16-1_all.deb generated (Reading database ... 41397 files and directories currently installed.) Preparing to replace solmegacli 8.02.16-1 (using solmegacli_8.02.16-1_all.deb) ... Unpacking replacement solmegacli ... Setting up solmegacli (8.02.16-1) ... In /var/logs/dpkg.log: 2012-03-23 20:40:19 status unpacked solmegacli 8.02.16-1 2012-03-23 20:40:19 configure solmegacli 8.02.16-1 8.02.16-1 2012-03-23 20:40:19 status unpacked solmegacli 8.02.16-1 2012-03-23 20:40:19 status half-configured solmegacli 8.02.16-1 2012-03-23 20:40:19 status installed solmegacli 8.02.16-1 So... I've got three questions: Is it possible to install and use MegaCli in Nexentastor 3? If so, how can I install MegaCli on Nexentastor 3? Suggestions welcome!!! If not, is there a better way to monitor the condition of the Perc 5/i hardware raid? Our 2950 does have a DRAC card, so can I use that to monitor the raid condition?

  Read the article

• XenServer 6.0.2 path to installation media contains non-ascii characters

  - by cmaduro

  XenServer 6.0.2 install fails no matter what I do. I have confirmed that the md5 checksum on my ISO file is good. I tried installing from a mounted ISO file (remotely via iKVM). I tried installing from physical media. I tried installing from a bootable USB stick (using syslinux + contents of the ISO) All attempts have yielded the same result: When verifying the installation media, at 0% initializing, the following is reported: "Some packages appeared to be damaged." followed by a list of pretty much all the gz2 and rpm packages. If I skip the media verification the installer proceeds and then gives me an error when it reaches "Installing from base pack" at 0% which states "An unrecoverable error has occurred. The error was: 'ascii' codec can't decode byte 0xff in position 20710: ordinal not in range(128) Please refer to your user guide, or contact a Technical Support Representative, for further details" there is one option left which is to reboot. Apparently at some point during the processing of the repositories on the installation media non-ascii characters are found, which causes the installer to quit. How do I fix this? Here are my specs TYAN S8236 motherboard 2 AMD Opteron 6234 processors LSI2008 card connected to 2 1TB Seagate Constellation drives SATA, 1 500GB Corsair m4 SSD SATA and 1 Corsair Forse 3 - 64GB SSD SATA Onboard SATA connected to a slim DVD-+RW. Onboard SAS connected to 2 IBM ESX 70GB 10K SAS drives (for XenServer) 256GB memory ================================================================================= Comments: According to pylonsbook.com "chances are you have run into a problem with character sets, encodings, and Unicode" – cmaduro 10 hours ago A clue is provided by "vmware.com/support/vsphere5/doc/…; Data migration fails if the path to the vCenter Server installation media contains non-ASCII characters When this problem occurs, an error message similar to: 'ascii' codec can't decode byte 0xd0 in position 30: ordinal not in range(128) appears, and the installer quits unexpectedly during the data migration process. – cmaduro 10 hours ago This is an error that python throws. And guess what, the .py extention of the file you have to edit in this link community.spiceworks.com/how_to/show/1168 means the installer is written in python. Python is interpreted, so now to find the install file responsible for this error. – cmaduro 6 hours ago The file that generates the error upon verification is /opt/xensource/installer/tui/repo.py. The error message appears around line 359. – cmaduro 2 hours ago I am fairly sure that the install error is generated somewhere in repository.py as the backend.py file throws errors while methods in that file are being called. Perhaps all errors can be traced back to this file. – cmaduro 1 hour ago

  Read the article

• DNS "recursion not available" using a Cisco AnyConnect VPN connection

  - by codeape

  Does anyone have experience with configuring Cisco AnyConnect VPN? We have a problem with client DNS name resolution when connected over VPN. To me, it looks as if the Cisco AnyConnect VPN client intercepts DNS queries from the clients. Can someone confirm that the AnyConnect VPN client in fact does this (intercepts DNS traffic)? Where is this configured on the VPN server? EDIT: Here's how the routing table changes when I connect to the VPN: [~] $ diff -u /tmp/route_normal /tmp/route_vpn --- /tmp/route_normal 2010-01-20 19:23:47.000000000 +0100 +++ /tmp/route_vpn 2010-01-20 19:24:46.000000000 +0100 @@ -1,6 +1,10 @@ Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface +xxx.xxx.xx.xx.i 10.0.0.1 255.255.255.255 UGH 0 0 0 ath0 172.16.53.0 * 255.255.255.0 U 0 0 0 vmnet1 10.0.0.0 * 255.255.255.0 U 0 0 0 ath0 +172.17.20.0 * 255.255.255.0 U 0 0 0 cscotun 0 +192.168.111.0 172.17.20.212 255.255.255.0 UG 0 0 0 cscotun 0 172.16.140.0 * 255.255.255.0 U 0 0 0 vmnet8 +172.16.0.0 172.17.20.212 255.255.0.0 UG 0 0 0 cscotun 0 default 10.0.0.1 0.0.0.0 UG 0 0 0 ath0 EDIT 2: The IT guy has done "something" on the VPN endpoint. Now I get "recursion not available" when doing nslookup. The DNS servers have recursion enabled. So it must be the Cisco VPN DNS interception messing this up. ubuntu@domU-12-31-39-00-ED-14:~$ /opt/cisco/vpn/bin/vpn connect xxx.xxxxxx.xx ... >> Please enter your username and password ... >> notice: Establishing VPN... >> state: Connected >> notice: VPN session established to ... ubuntu@domU-12-31-39-00-ED-14:~$ nslookup www.vg.no ;; Got recursion not available from ..., trying next server ;; Got recursion not available from ..., trying next server ;; Got recursion not available from ..., trying next server ;; Got recursion not available from ..., trying next server Server: 172.16.0.23 Address: 172.16.0.23#53 ** server can't find www.vg.no.compute-1.internal: REFUSED ubuntu@domU-12-31-39-00-ED-14:~$ ping 195.88.55.16 PING 195.88.55.16 (195.88.55.16) 56(84) bytes of data. 64 bytes from 195.88.55.16: icmp_seq=1 ttl=240 time=110 ms 64 bytes from 195.88.55.16: icmp_seq=2 ttl=240 time=111 ms 64 bytes from 195.88.55.16: icmp_seq=3 ttl=240 time=109 ms ^C --- 195.88.55.16 ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 2017ms rtt min/avg/max/mdev = 109.953/110.379/111.075/0.496 ms

  Read the article

• Double MySQL Running on Mountain Lion

  - by Norris

  After I've done a full restart, my Apache PHP server doesn't connect to Local MySQL ( connecting via 127.0.0.1 because localhost for some reason fails always ). So I did this today: ? ~ mysqladmin shutdown -u root -p Enter password: ? ~ mysqladmin shutdown -u root -p Enter password: mysqladmin: connect to server at 'localhost' failed error: 'Can't connect to local MySQL server through socket '/tmp/mysql.sock' (2)' Check that mysqld is running and that the socket: '/tmp/mysql.sock' exists! Which basically means that I succeeded in shutting down mysql. But as soon as I did - Apache PHP successfully connect to MySQL and my local sites work without a hiccup until the next restart. Here are a few other details: (as you can tell - I've installed MySQL via brew) ? ~ sudo ps aux | grep mysql N 4774 0.0 0.0 2432768 620 s000 S+ 9:53AM 0:00.00 grep mysql N 4772 0.0 2.6 3030168 440688 ?? S 9:51AM 0:00.29 /usr/local/Cellar/mysql/5.6.13/bin/mysqld --basedir=/usr/local/Cellar/mysql/5.6.13 --datadir=/usr/local/var/mysql --plugin-dir=/usr/local/Cellar/mysql/5.6.13/lib/plugin --bind-address=127.0.0.1 --log-error=/usr/local/var/mysql/N.local.err --pid-file=/usr/local/var/mysql/N.local.pid N 4686 0.0 0.0 2433432 1000 ?? S 9:51AM 0:00.01 /bin/sh /usr/local/opt/mysql/bin/mysqld_safe --bind-address=127.0.0.1 N 4362 0.0 2.7 3120276 458728 ?? S 9:47AM 0:00.45 mysqld ? ~ lsof -i | grep mysql mysqld 4362 N 16u IPv6 0x76959e40691f9f93 0t0 TCP *:mysql (LISTEN) This is the weird thing: ? ~ killall -9 mysqld MySQL Is dead! Apache doesn't connect. Then, when I run: ? ~ sudo mysqladmin shutdown -u root -p Enter password: Apache is (again) able to successfully connect to MySQL. As far as I understand this means that I have two mysql servers setup and both of them are trying to start up at the same time, but I don't have the slightest idea on how to fix it. I've tried brew reinstalling but that didn't help. ? ~ which mysqladmin /usr/local/bin/mysqladmin ? ~ whence -p mysql /usr/local/bin/mysql

  Read the article

• Quantifying the effects of partition mis-alignment

  - by Matt

  I'm experiencing some significant performance issues on an NFS server. I've been reading up a bit on partition alignment, and I think I have my partitions mis-aligned. I can't find anything that tells me how to actually quantify the effects of mis-aligned partitions. Some of the general information I found suggests the performance penalty can be quite high (upwards of 60%) and others say it's negligible. What I want to do is determine if partition alignment is a factor in this server's performance problems or not; and if so, to what degree? So I'll put my info out here, and hopefully the community can confirm if my partitions are indeed mis-aligned, and if so, help me put a number to what the performance cost is. Server is a Dell R510 with dual E5620 CPUs and 8 GB RAM. There are eight 15k 2.5” 600 GB drives (Seagate ST3600057SS) configured in hardware RAID-6 with a single hot spare. RAID controller is a Dell PERC H700 w/512MB cache (Linux sees this as a LSI MegaSAS 9260). OS is CentOS 5.6, home directory partition is ext3, with options “rw,data=journal,usrquota”. I have the HW RAID configured to present two virtual disks to the OS: /dev/sda for the OS (boot, root and swap partitions), and /dev/sdb for a big NFS share: [root@lnxutil1 ~]# parted -s /dev/sda unit s print Model: DELL PERC H700 (scsi) Disk /dev/sda: 134217599s Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 63s 465884s 465822s primary ext2 boot 2 465885s 134207009s 133741125s primary lvm [root@lnxutil1 ~]# parted -s /dev/sdb unit s print Model: DELL PERC H700 (scsi) Disk /dev/sdb: 5720768639s Sector size (logical/physical): 512B/512B Partition Table: gpt Number Start End Size File system Name Flags 1 34s 5720768606s 5720768573s lvm Edit 1 Using the cfq IO scheduler (default for CentOS 5.6): # cat /sys/block/sd{a,b}/queue/scheduler noop anticipatory deadline [cfq] noop anticipatory deadline [cfq] Chunk size is the same as strip size, right? If so, then 64kB: # /opt/MegaCli -LDInfo -Lall -aALL -NoLog Adapter #0 Number of Virtual Disks: 2 Virtual Disk: 0 (target id: 0) Name:os RAID Level: Primary-6, Secondary-0, RAID Level Qualifier-3 Size:65535MB State: Optimal Stripe Size: 64kB Number Of Drives:7 Span Depth:1 Default Cache Policy: WriteBack, ReadAdaptive, Direct, No Write Cache if Bad BBU Current Cache Policy: WriteThrough, ReadAdaptive, Direct, No Write Cache if Bad BBU Access Policy: Read/Write Disk Cache Policy: Disk's Default Number of Spans: 1 Span: 0 - Number of PDs: 7 ... physical disk info removed for brevity ... Virtual Disk: 1 (target id: 1) Name:share RAID Level: Primary-6, Secondary-0, RAID Level Qualifier-3 Size:2793344MB State: Optimal Stripe Size: 64kB Number Of Drives:7 Span Depth:1 Default Cache Policy: WriteBack, ReadAdaptive, Direct, No Write Cache if Bad BBU Current Cache Policy: WriteThrough, ReadAdaptive, Direct, No Write Cache if Bad BBU Access Policy: Read/Write Disk Cache Policy: Disk's Default Number of Spans: 1 Span: 0 - Number of PDs: 7 If it's not obvious, virtual disk 0 corresponds to /dev/sda, for the OS; virtual disk 1 is /dev/sdb (the exported home directory tree).

  Read the article

• Installing ImageMagick on Mac OSX 10.6

  - by Russell C.

  I just got a new Mac and am trying to setup a local Perl development environment. I'm using MAMP but also need the ImageMagick perl module installed in order to do some of the photo processing our scripts require. I tried installing ImageMagick manually but ran into some issues and after reading online a lot of people reported having issues going this route. The general consensus was to install it using MacPorts instead so I went ahead and installed MacPorts. Unfortunately, MacPorts can't seem to install it successfully either. Here is the command I'm using to try to install ImageMagick: sudo port install p5-perlmagick And here are all the errors reported during install: ---> Computing dependencies for p5-perlmagick ---> Building p5-perlmagick Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_perl_p5-perlmagick/work/PerlMagick-6.32" && /usr/bin/make -j2 all " returned error 2 Command output: Magick.xs:10918: error: 'struct Methods' has no member named 'exception' Magick.xs:10918: error: request for member 'severity' in something not a structure or union Magick.xs:10918: error: 'ErrorException' undeclared (first use in this function) Magick.xs:10919: error: 'struct Methods' has no member named 'exception' Magick.xs:10920: warning: implicit declaration of function 'GetImageException' Magick.xs:10922: error: 'struct PackageInfo' has no member named 'image_info' Magick.xs:10922: error: 'struct Methods' has no member named 'adjoin' Magick.xs:10929: error: request for member 'severity' in something not a structure or union Magick.xs:10929: error: 'UndefinedException' undeclared (first use in this function) Magick.xs:10929: error: request for member 'severity' in something not a structure or union Magick.xs:10929: error: request for member 'reason' in something not a structure or union Magick.xs:10929: error: request for member 'severity' in something not a structure or union Magick.xs:10929: error: request for member 'reason' in something not a structure or union Magick.xs:10929: warning: pointer/integer type mismatch in conditional expression Magick.xs:10929: error: request for member 'description' in something not a structure or union Magick.xs:10929: error: request for member 'description' in something not a structure or union Magick.xs:10929: error: request for member 'severity' in something not a structure or union Magick.xs:10929: error: request for member 'description' in something not a structure or union Magick.xs:10929: warning: pointer/integer type mismatch in conditional expression Magick.xs:10929: error: request for member 'description' in something not a structure or union Magick.xs:10929: warning: passing argument 2 of 'Perl_sv_catpv' from incompatible pointer type Magick.xs:10929: warning: unused variable 'message' Magick.xs:10856: warning: unused variable 'filename' Magick.c:10784: warning: unused variable 'ref' Magick.c:10777: warning: unused variable 'ix' Magick.xs: In function 'boot_Image__Magick': Magick.xs:2122: warning: implicit declaration of function 'InitializeMagick' Magick.xs:2123: warning: implicit declaration of function 'SetWarningHandler' Magick.xs:2124: warning: implicit declaration of function 'SetErrorHandler' make: *** [Magick.o] Error 1 Error: Status 1 encountered during processing. Before reporting a bug, first run the command again with the -d flag to get complete output. I have no idea what the problem might be or how to go about successfully installing ImageMagick. I'd appreciate any help & advice that someone out there that has done this successfully might be able to provide. Thanks in advance!

  Read the article

• Change default DNS server in Arch Linux

  - by AntoineG

  I'm in Viet Nam and most social websites (Facebook, Twitter and the likes - even reddit) are blocked by the ISP DNS server. I tried to change the DNS server of my Arch box using the resolv.conf file, but it failed miserably since dhcpd generates this file automatically everytime I connect to the LAN. I've been looking around to try and find out how to fix this, without success. Either I s*ck at Googling, either it is non-trivial to do so. EDIT 1: Meh, apparently posting it here made me feel guilty and I had to push my search a bit more. I found the same article than Ankur post below. This is what I made, if anybody ever faces the same problem: $ sudo gvim /etc/dhcpcd.conf Add "nohook resolv.conf" at the tail of the file. $ sudo gvim /etc/resolv.conf Add to the file (OpenDNS servers): nameserver 208.67.222.222 nameserver 208.67.220.220 Or (Google DNS): nameserver 8.8.8.8 nameserver 8.8.4.4 Then, verify it worked (need package dnsutils): $ dig www.facebook.com ; <<>> DiG 9.9.1-P1 <<>> www.facebook.com ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 16994 ;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 1 ;; OPT PSEUDOSECTION: ; EDNS: version: 0, flags:; udp: 4096 ;; QUESTION SECTION: ;www.facebook.com. IN A ;; ANSWER SECTION: www.facebook.com. 89 IN A 69.171.224.53 ;; Query time: 87 msec ;; SERVER: 208.67.222.222#53(208.67.222.222) ;; WHEN: Thu Jun 28 00:43:23 2012 ;; MSG SIZE rcvd: 61 See ;; SERVER: 208.67.222.222#53(208.67.222.222), it worked.

  Read the article

• Root directory permissions on Mac OS X 10.6?

  - by Agos

  Hi, I was wondering if it's normal that the root directory / should be owned by “root”. I get asked for my password every time I want to do something there (e.g. save a file, create a directory) and I don't remember this happening before (though this may just be my faulty memory). Here's the relevant terminal output: MacBook:~ ago$ ls -lah / total 37311 drwxr-xr-x@ 35 root staff 1,2K 22 Mar 12:34 . drwxr-xr-x@ 35 root staff 1,2K 22 Mar 12:34 .. -rw-rw-r--@ 1 root admin 21K 22 Mar 10:21 .DS_Store drwx------ 3 root admin 102B 28 Feb 2008 .Spotlight-V100 d-wx-wx-wt 2 root admin 68B 31 Ago 2009 .Trashes -rw-r--r--@ 1 ago 501 45K 23 Gen 2008 .VolumeIcon.icns srwxrwxrwx 1 root staff 0B 22 Mar 12:34 .dbfseventsd ---------- 1 root admin 0B 23 Giu 2009 .file drwx------ 27 root admin 918B 22 Mar 10:55 .fseventsd -rw-r--r--@ 1 ago admin 59B 30 Ott 2007 .hidden -rw------- 1 root wheel 320K 30 Nov 11:42 .hotfiles.btree drwxr-xr-x@ 2 root wheel 68B 18 Mag 2009 .vol drwxrwxr-x+ 276 root admin 9,2K 19 Mar 18:28 Applications drwxrwxr-x@ 21 root admin 714B 14 Nov 12:01 Developer drwxrwxr-t+ 74 root admin 2,5K 18 Dic 22:14 Library drwxr-xr-x@ 2 root wheel 68B 23 Giu 2009 Network drwxr-xr-x 4 root wheel 136B 13 Nov 17:49 System drwxr-xr-x 6 root admin 204B 31 Ago 2009 Users drwxrwxrwt@ 4 root admin 136B 22 Mar 12:35 Volumes drwxr-xr-x@ 39 root wheel 1,3K 13 Nov 17:44 bin drwxrwxr-t@ 2 root admin 68B 23 Giu 2009 cores dr-xr-xr-x 3 root wheel 5,1K 17 Mar 11:29 dev lrwxr-xr-x@ 1 root wheel 11B 31 Ago 2009 etc -> private/etc dr-xr-xr-x 2 root wheel 1B 17 Mar 11:30 home drwxrwxrwt@ 3 root wheel 102B 31 Ago 2009 lost+found -rw-r--r--@ 1 root wheel 18M 3 Nov 19:40 mach_kernel dr-xr-xr-x 2 root wheel 1B 17 Mar 11:30 net drwxr-xr-x@ 3 root admin 102B 24 Nov 2007 opt drwxr-xr-x@ 6 root wheel 204B 31 Ago 2009 private drwxr-xr-x@ 64 root wheel 2,1K 13 Nov 17:44 sbin lrwxr-xr-x@ 1 root wheel 11B 31 Ago 2009 tmp -> private/tmp drwxr-xr-x@ 17 root wheel 578B 12 Set 2009 usr lrwxr-xr-x@ 1 root wheel 11B 31 Ago 2009 var -> private/var Are these ownerships / permissions ok? Should I chmod/chown something? Thanks in advance

  Read the article

• Why can't I use SSL certs imported via Server Admin in a custom Apache install?

  - by morgant

  I've got a couple of Mac OS X 10.6.8 Server web servers that run a custom AMP255 (Apache 2.x, MySQL 5.x, and PHP 5.x) stack installed using MacPorts. We've got a lot of Mac OS X Server servers and generally install SSL certs via Server Admin and they "just work" in the built-in services, however, these web servers have always had SSL certs installed in a non-standard location and used only for Apache. Long story short, we're trying to standardize this part of our administration and install certs via Server Admin, but have run into the following issue: when the certs are installed via Server Admin and referenced in our Apache conf files, Apache then prompts for a password upon trying to start. It does not seem to be any password we know, certainly not the admin or keychain passwords! We've added the _www user to the certusers (mainly just to ensure they have the proper access to the private key in /etc/certificates/). So, with the custom installed certs we have the following files (basically just pasted in from the company we purchase our certs from): -rw-r--r-- 1 root admin 1395 Apr 10 11:22 *.domain.tld.ca -rw-r--r-- 1 root admin 1656 Apr 10 11:21 *.domain.tld.cert -rw-r--r-- 1 root admin 1680 Apr 10 11:22 *.domain.tld.key And the following in the VirtualHost in /opt/local/apache2/conf/extra/httpd-ssl.conf: SSLCertificateFile /path/to/certs/*.domain.tld.cert SSLCertificateKeyFile /path/to/certs/*.domain.tld.key SSLCACertificateFile /path/to/certs/*.domain.tld.ca This setup functions normally. If we use the certs installed via Server Admin, which both Server Admin & Keychain Assistant show as valid, they're installed in /etc/certificates/ as follows: -rw-r--r-- 1 root wheel 1655 Apr 9 13:44 *.domain.tld.SOMELONGHASH.cert.pem -rw-r--r-- 1 root wheel 4266 Apr 9 13:44 *.domain.tld.SOMELONGHASH.chain.pem -rw-r----- 1 root certusers 3406 Apr 9 13:44 *.domain.tld.SOMELONGHASH.concat.pem -rw-r----- 1 root certusers 1751 Apr 9 13:44 *.domain.tld.SOMELONGHASH.key.pem And if we replace the aforementioned lines in our httpd-ssl.conf with the following: SSLCertificateFile /etc/certificates/*.domain.tld.SOMELONGHASH.cert.pem SSLCertificateKeyFile /etc/certificates/*.domain.tld.SOMELONGHASH.key.pem SSLCertificateChainFile /etc/certificates/*.domain.tld.SOMELONGHASH.chain.pem This prompts for the unknown password. I have also tried httpd-ssl.conf configured as follows: SSLCertificateFile /etc/certificates/*.domain.tld.SOMELONGHASH.cert.pem SSLCertificateKeyFile /etc/certificates/*.domain.tld.SOMELONGHASH.key.pem SSLCertificateChainFile /etc/certificates/*.domain.tld.SOMELONGHASH.concat.pem And as: SSLCertificateFile /etc/certificates/*.domain.tld.SOMELONGHASH.cert.pem SSLCertificateKeyFile /etc/certificates/*.domain.tld.SOMELONGHASH.key.pem SSLCACertificateFile /etc/certificates/*.domain.tld.SOMELONGHASH.chain.pem We've verified that the certificate is configured to allow all applications access it (in Keychain Assistant). A diff of the /etc/certificates/*.domain.tld.SOMELONGHASH.key.pem & *.domain.tld.key files shows the former is encrypted and the latter is not, so we're assuming that Server Admin/Keychain Assistant is encrypting them for some reason. I know I can create an unencrypted key file as follows: sudo openssl rsa -in /etc/certificates/*.domain.tld.SOMELONGHASH.key.pem -out /etc/certificates/*.domain.tld.SOMELONGHASH.key.no_password.pem But, I can't do that without entering the password. I thought maybe I could export an unencrypted copy of the key from Keychain Admin, but I'm not seeing such an option (not to mention that the .pem options are greyed out in all export options). Any assistance would be greatly appreciated.

  Read the article

• Trouble setting up PATH for Java on Debian

  - by milkmansrevenge

  I am trying to get Oracle Java 7 update 3 working correctly on Debian 6. I have downloaded and set up the files in /usr/java/jre1.7.0_03. I have also set the following two lines at the end of /etc/bash.bashrc: export JAVA_HOME=/usr/java/jre1.7.0_03 export PATH=$PATH:$JAVA_HOME/bin Logging in as other users and root is fine, Java can be found: chris@mc:~$ java -version java version "1.7.0_03" Java(TM) SE Runtime Environment (build 1.7.0_03-b04) Java HotSpot(TM) 64-Bit Server VM (build 22.1-b02, mixed mode) However there are two cases where Java cannot be found as detailed below. Note that both of these worked fine when I have previously installed OpenJDK Java 6 via aptitude, but I need Oracle Java 7 for various reasons. Most importantly, I cannot run commands as another user via su, despite the PATH showing that Java should be present. The user was created with adduser chris root@mc:~# su chris -c "echo $PATH" /usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/java/jre1.7.0_03/bin:/bin root@mc:~# su chris -c "java -version" bash: java: command not found root@mc:~# su chris -c "/usr/java/jre1.7.0_03/bin/java -version" java version "1.7.0_03" ... How can it be in the PATH but not be found? Update 05/04/2012: explained by Daniel, to do with it being a non-interactive shell so files such as /etc/profile and /etc/bash.bashrc are not executed. Doing a full swap to that user and running Java works: root@mc:~# su chris chris@mc:/root$ java -version java version "1.7.0_03" ... I run a script on start up which exhibits similar but slightly different problems. The script is located in /etc/init.d/start-mystuff.sh and calls a jar: #!/bin/bash # /etc/init.d/start-mystuff.sh java -jar /opt/Mars.jar I can confirm that the script runs on start up and the exit code is 127, which indicates command not found. Inserting a line to print/save the PATH shows that it is: /sbin:/usr/sbin:/bin:/usr/bin This second problem isn't as important because I can just point directly to the Java executable in the script, but I am still curious! I have tried setting the full PATH and JAVA_HOME explicitly in /etc/environment which didn't help. I have also tried setting them in /etc/profile which doesn't seem to help either. I have tried logging in and out again after setting PATH in the various locations (duh!). Anyway, long post for what will probably have a simple one line solution :( Any help with this would be greatly appreciated, I have spent far too long trying to fix it by myself. Motivation The first problem may seem obscure but in my system I have users that are not allowed SSH access yet I still want to run processes as them. I have a ton of scripts operating in this way and don't want to have to change them all.

  Read the article

< Previous Page | 54 55 56 57 58 59 60 61 62 63  | Next Page >