Search Results

Search found 1494 results on 60 pages for 'prototypal inheritance'.

Page 58/60 | < Previous Page | 54 55 56 57 58 59 60  | Next Page >

• Class template specializations with shared functionality

  - by Thomas

  I'm writing a simple maths library with a template vector type: template<typename T, size_t N> class Vector { public: Vector<T, N> &operator+=(Vector<T, N> const &other); // ... more operators, functions ... }; Now I want some additional functionality specifically for some of these. Let's say I want functions x() and y() on Vector<T, 2> to access particular coordinates. I could create a partial specialization for this: template<typename T> class Vector<T, 3> { public: Vector<T, 3> &operator+=(Vector<T, 3> const &other); // ... and again all the operators and functions ... T x() const; T y() const; }; But now I'm repeating everything that already existed in the generic template. I could also use inheritance. Renaming the generic template to VectorBase, I could do this: template<typename T, size_t N> class Vector : public VectorBase<T, N> { }; template<typename T> class Vector<T, 3> : public VectorBase<T, 3> { public: T x() const; T y() const; }; However, now the problem is that all operators are defined on VectorBase, so they return VectorBase instances. These cannot be assigned to Vector variables: Vector<float, 3> v; Vector<float, 3> w; w = 5 * v; // error: no conversion from VectorBase<float, 3> to Vector<float, 3> I could give Vector an implicit conversion constructor to make this possible: template<typename T, size_t N> class Vector : public VectorBase<T, N> { public: Vector(VectorBase<T, N> const &other); }; However, now I'm converting from Vector to VectorBase and back again. Even though the types are the same in memory, and the compiler might optimize all this away, it feels clunky and I don't really like to have potential run-time overhead for what is essentially a compile-time problem. Is there any other way to solve this?

  Read the article

• Overwhelmed by design patterns... where to begin?

  - by Pete

  I am writing a simple prototype code to demonstrate & profile I/O schemes (HDF4, HDF5, HDF5 using parallel IO, NetCDF, etc.) for a physics code. Since focus is on IO, the rest of the program is very simple: class Grid { public: floatArray x,y,z; }; class MyModel { public: MyModel(const int &nip1, const int &njp1, const int &nkp1, const int &numProcs); Grid grid; map<string, floatArray> plasmaVariables; }; Where floatArray is a simple class that lets me define arbitrary dimensioned arrays and do mathematical operations on them (i.e. x+y is point-wise addition). Of course, I could use better encapsulation (write accessors/setters, etc.), but that's not the concept I'm struggling with. For the I/O routines, I am envisioning applying simple inheritance: Abstract I/O class defines read & write functions to fill in the "myModel" object HDF4 derived class HDF5 HDF5 using parallel IO NetCDF etc... The code should read data in any of these formats, then write out to any of these formats. In the past, I would add an AbstractIO member to myModel and create/destroy this object depending on which I/O scheme I want. In this way, I could do something like: myModelObj.ioObj->read('input.hdf') myModelObj.ioObj->write('output.hdf') I have a bit of OOP experience but very little on the Design Patterns front, so I recently acquired the Gang of Four book "Design Patterns: Elements of Reusable Object-Oriented Software". OOP designers: Which pattern(s) would you recommend I use to integrate I/O with the myModel object? I am interested in answering this for two reasons: To learn more about design patterns in general Apply what I learn to help refactor an large old crufty/legacy physics code to be more human-readable & extensible. I am leaning towards applying the Decerator pattern to myModel, so I can attach the I/O responsibilities dynamically to myModel (i.e. whether to use HDF4, HDF5, etc.). However, I don't feel very confident that this is the best pattern to apply. Reading the Gang of Four book cover-to-cover before I start coding feels like a good way to develop an unhealthy caffeine addiction. What patterns do you recommend?

  Read the article

• How to learn proper C++?

  - by Chris

  While reading a long series of really, really interesting threads, I've come to a realization: I don't think I really know C++. I know C, I know classes, I know inheritance, I know templates (& the STL) and I know exceptions. Not C++. To clarify, I've been writing "C++" for more than 5 years now. I know C, and I know that C and C++ share a common subset. What I've begun to realize, though, is that more times than not, I wind up treating C++ something vaguely like "C with classes," although I do practice RAII. I've never used Boost, and have only read up on TR1 and C++0x - I haven't used any of these features in practice. I don't use namespaces. I see a list of #defines, and I think - "Gracious, that's horrible! Very un-C++-like," only to go and mindlessly write class wrappers for the sake of it, and I wind up with large numbers (maybe a few per class) of static methods, and for some reason, that just doesn't seem right lately. The professional in me yells "just get the job done," the academic yells "you should write proper C++ when writing C++" and I feel like the point of balance is somewhere in between. I'd like to note that I don't want to program "pure" C++ just for the sake of it. I know several languages. I have a good feel for what "Pythonic" is. I know what clean and clear PHP is. Good C code I can read and write better than English. The issue is that I learned C by example, and picked up C++ as a "series of modifications" to C. And a lot of my early C++ work was creating class wrappers for C libraries. I feel like my own personal C-heavy background while learning C++ has sort of... clouded my acceptance of C++ in it's own right, as it's own language. Do the weathered C++ lags here have any advice for me? Good examples of clean, sharp C++ to learn from? What habits of C does my inner-C++ really need to break from? My goal here is not to go forth and trumpet "good" C++ paradigm from rooftops for the sake of it. C and C++ are two different languages, and I want to start treating them that way. How? Where to start? Thanks in advance! Cheers, -Chris

  Read the article

• Can this way of storing typed objects be improved?

  - by Pindatjuh

  This is an "can it be improved"-question. Topic: Storing typed objects in memory. Background information: I'm building a compiler for the x86-32 Windows platform for my language. My goal includes typed objects. Idea: Every primitive is a semi-class (it can be used as if it was a normal class, but it's stored more compact). Every class is represented by primitives and some meta-data (containing class-properties, inheritance stuff, etc.). The meta-data is complex: it doesn't use fields but instead context-switches. For primitives, the meta-data is very small, compared to a "real" class, which is alot bigger. This enables another idea that "primitives are objects", in my language, which I found nessecairy. Example: If I have an array of 32 booleans, then the pure content of this array is exactly 4 byte (32 bits of booleans). The meta-data will contain flags that the type is an array of booleans, which contains 32 entries. The meta-data is very compacted, on bit-level: using a sort of "packing" mechanism, which is read by a FSM at runtime, when doing inspection of the type (like when passing the object to methods for checking, etc.) For instance (read from left to right, top to bottom, remember vertical position when going to the right, and check nearest column header for meaning of switch): Primitive? Array? Type-Meta 1 Byte? || Size (1 byte) 1 1 [...] 1 [...] done 0 2 Bytes? || Size (2 bytes) 1 [...] done || Size (4 bytes) 0 [...] done Integer? 1 Byte? 2 Bytes? 0 1 0 1 done 1 done 0 done Boolean? Byte? 0 1 0 done 1 done More-Primitives 0 .... Class-Stuff (Huge) 0 ... (After reaching done the data is inserted. || = byte alignment. [...] is variable sized. ... is not described here, for simplicity. And let's call them cost-based-data-structures.) For an array of 32 booleans containing all true values, the memory for this type would be (read top-down): 1 Primitive 1 Array 1 ArrayType: Primitive 0 Not-Array 0 Not-Integer 1 Boolean 0 Not-Byte (thus bit) 1 Integer Size: 1 Byte 00100000 Array size 01010101 01010101 01010101 01010101 Data (user defined) Thus, 8 bytes represent 32 booleans in an array: 11100101 00100000 01010101 01010101 01010101 01010101 How can I improve this? (Both performance- and memory-consumption wise)

  Read the article

• Patterns for dynamic CMS components (event driven?)

  - by CitrusTree

  Sorry my title is not great, this is my first real punt at moving 100% to OO as I've been procedural for more years than I can remember. I'm finding it hard to understand if what I'm trying to do is possible. Depending on people's thoughts on the 2 following points, I'll go down that route. The CMS I'm putting together is quote small, however focuses very much on different types of content. I could easily use Drupal which I'm very comfortable with, but I want to give myself a really good reasons to move myself into design patterns / OO-PHP 1) I have created a base 'content' class which I wish to be able to extend to handle different types of content. The base class, for example, handles HTML content, and extensions might handle XML or PDF output instead. On the other hand, at some point I may wish to extend the base class for a given project completely. I.e. if class 'content-v2' extended class 'content' for that site, any calls to that class should actually call 'content-v2' instead. Is that possible? If the code instantiates an object of type 'content' - I actually want it to instantiate one of type 'content-v2'... I can see how to do it using inheritance, but that appears to involve referring to the class explicitly, I can't see how to link the class I want it to use instead dynamically. 2) Secondly, the way I'm building this at the moment is horrible, I'm not happy with it. It feels very linear indeed - i.e. get session details get content build navigation theme page publish. To do this all the objects are called 1-by-1 which is all very static. I'd like it to be more dynamic so that I can add to it at a later date (very closely related to first question). Is there a way that instead of my orchestrator class calling all the other classes 1-by-1, then building the whole thing up at the end, that instead each of the other classes can 'listen' for specific events, then at the applicable point jump in and do their but? That way the orchestrator class would not need to know what other classes were required, and call them 1-by-1. Sorry if I've got this all twisted in my head. I'm trying to build this so it's really flexible.

  Read the article

• Hidden divs for "lazy javascript" loading? Possible security/other issues?

  - by xyld

  I'm curious about people's opinion's and thoughts about this situation. The reason I'd like to lazy load javascript is because of performance. Loading javascript at the end of the body reduces the browser blocking and ends up with much faster page loads. But there is some automation I'm using to generate the html (django specifically). This automation has the convenience of allowing forms to be built with "Widgets" that output content it needs to render the entire widget (extra javascript, css, ...). The problem is that the widget wants to output javascript immediately into the middle of the document, but I want to ensure all javascript loads at the end of the body. When the following widget is added to a form, you can see it renders some <script>...</script> tags: class AutoCompleteTagInput(forms.TextInput): class Media: css = { 'all': ('css/jquery.autocomplete.css', ) } js = ( 'js/jquery.bgiframe.js', 'js/jquery.ajaxQueue.js', 'js/jquery.autocomplete.js', ) def render(self, name, value, attrs=None): output = super(AutoCompleteTagInput, self).render(name, value, attrs) page_tags = Tag.objects.usage_for_model(DataSet) tag_list = simplejson.dumps([tag.name for tag in page_tags], ensure_ascii=False) return mark_safe(u'''<script type="text/javascript"> jQuery("#id_%s").autocomplete(%s, { width: 150, max: 10, highlight: false, scroll: true, scrollHeight: 100, matchContains: true, autoFill: true }); </script>''' % (name, tag_list,)) + output What I'm proposing is that if someone uses a <div class=".lazy-js">...</div> with some css (.lazy-js { display: none; }) and some javascript (jQuery('.lazy-js').each(function(index) { eval(jQuery(this).text()); }), you can effectively force all javascript to load at the end of page load: class AutoCompleteTagInput(forms.TextInput): class Media: css = { 'all': ('css/jquery.autocomplete.css', ) } js = ( 'js/jquery.bgiframe.js', 'js/jquery.ajaxQueue.js', 'js/jquery.autocomplete.js', ) def render(self, name, value, attrs=None): output = super(AutoCompleteTagInput, self).render(name, value, attrs) page_tags = Tag.objects.usage_for_model(DataSet) tag_list = simplejson.dumps([tag.name for tag in page_tags], ensure_ascii=False) return mark_safe(u'''<div class="lazy-js"> jQuery("#id_%s").autocomplete(%s, { width: 150, max: 10, highlight: false, scroll: true, scrollHeight: 100, matchContains: true, autoFill: true }); </div>''' % (name, tag_list,)) + output Nevermind all the details of my specific implementation (the specific media involved), I'm looking for a consensus on whether the method of using lazy-loaded javascript through hidden a hidden tags can pose issues whether security or other related? One of the most convenient parts about this is that it follows the DRY principle rather well IMO because you don't need to hack up a specific lazy-load for each instance in the page. It just "works". UPDATE: I'm not sure if django has the ability to queue things (via fancy template inheritance or something?) to be output just before the end of the </body>?

  Read the article

• g++ linker error--typeinfo, but not vtable

  - by James

  I know the standard answer for a linker error about missing typeinfo usually also involves vtable and some virtual function that I forgot to actually define. I'm fairly certain that's not the situation this time. Here's the error: UI.o: In function boost::shared_ptr<Graphics::Widgets::WidgetSet>::shared_ptr<Graphics::Resource::GroupByState>(boost::shared_ptr<Graphics::Resource::GroupByState> const&, boost::detail::dynamic_cast_tag)': UI.cpp:(.text._ZN5boost10shared_ptrIN8Graphics7Widgets9WidgetSetEEC1INS1_8Resource12GroupByStateEEERKNS0_IT_EENS_6detail16dynamic_cast_tagE[boost::shared_ptr<Graphics::Widgets::WidgetSet>::shared_ptr<Graphics::Resource::GroupByState>(boost::shared_ptr<Graphics::Resource::GroupByState> const&, boost::detail::dynamic_cast_tag)]+0x30): undefined reference totypeinfo for Graphics::Widgets::WidgetSet' Running c++filt on the obnoxious mangled name shows that it actually is looking at .boost::shared_ptr::shared_ptr(boost::shared_ptr const&, boost::detail::dynamic_cast_tag) The inheritance hierarchy looks something like class AbstractGroup { typedef boost::shared_ptr<AbstractGroup> Ptr; ... }; class WidgetSet : public AbstractGroup { typedef boost::shared_ptr<WidgetSet> Ptr; ... }; class GroupByState : public AbstractGroup { ... }; Then there's this: class UI : public GroupByState { ... void LoadWidgets( GroupByState::Ptr resource ); }; Then the original implementation: void UI::LoadWidgets( GroupByState::Ptr resource ) { WidgetSet::Ptr tmp( boost::dynamic_pointer_cast< WidgetSet >(resource) ); if( tmp ) { ... } } Stupid error on my part (trying to cast to a sibling class with a shared parent), even if the error is kind of cryptic. Changing to this: void UI::LoadWidgets( AbstractGroup::Ptr resource ) { WidgetSet::Ptr tmp( boost::dynamic_pointer_cast< WidgetSet >(resource) ); if( tmp ) { ... } } (which I'm fairly sure is what I actually meant to be doing) left me with a very similar error: UI.o: In function boost::shared_ptr<Graphics::Widgets::WidgetSet>::shared_ptr<Graphics::_Drawer::Group>(boost::shared_ptr<Graphics::_Drawer::Group> const&, boost::detail::dynamic_cast_tag)': UI.cpp:(.text._ZN5boost10shared_ptrIN8Graphics7Widgets9WidgetSetEEC1INS1_7_Drawer5GroupEEERKNS0_IT_EENS_6detail16dynamic_cast_tagE[boost::shared_ptr<Graphics::Widgets::WidgetSet>::shared_ptr<Graphics::_Drawer::Group>(boost::shared_ptr<Graphics::_Drawer::Group> const&, boost::detail::dynamic_cast_tag)]+0x30): undefined reference totypeinfo for Graphics::Widgets::WidgetSet' collect2: ld returned 1 exit status dynamic_cast_tag is just an empty struct in boost/shared_ptr.hpp. It's just a guess that boost might have anything at all to do with the error. Passing in a WidgetSet::Ptr totally eliminates the need for a cast, and it builds fine (which is why I think there's more going on than the standard answer for this question). Obviously, I'm trimming away a lot of details that might be important. My next step is to cut it down to the smallest example that fails to build, but I figured I'd try the lazy way out and take a stab on here first. TIA!

  Read the article

• Separation of domain and ui layer in a composite

  - by hansmaad

  Hi all, i'm wondering if there is a pattern how to separate the domain logic of a class from the ui responsibilities of the objects in the domain layer. Example: // Domain classes interface MachinePart { CalculateX(in, out) // Where do we put these: // Draw(Screen) ?? // ShowProperties(View) ?? // ... } class Assembly : MachinePart { CalculateX(in, out) subParts } class Pipe : MachinePart { CalculateX(in, out) length, diamater... } There is an application that calculates the value X for machines assembled from many machine parts. The assembly is loaded from a file representation and is designed as a composite. Each concrete part class stores some data to implement the CalculateX(in,out) method to simulate behaviour of the whole assembly. The application runs well but without GUI. To increase the usability a GUi should be developed on top of the existing implementation (changes to the existing code are allowed). The GUI should show a schematic graphical representation of the assembly and provide part specific dialogs to edit several parameters. To achieve these goals the application needs new functionality for each machine part to draw a schematic representation on the screen, show a property dialog and other things not related to the domain of machine simulation. I can think of some different solutions to implement a Draw(Screen) functionality for each part but i am not happy with each of them. First i could add a Draw(Screen) method to the MachinePart interface but this would mix-up domain code with ui code and i had to add a lot of functionality to each machine part class what makes my domain model hard to read and hard to understand. Another "simple" solution is to make all parts visitable and implement ui code in visitors but Visitor does not belong to my favorite patterns. I could derive UI variants from each machine part class to add the UI implementation there but i had to check if each part class is suited for inheritance and had to be careful on changes to the base classes. My currently favorite design is to create a parallel composite hierarchy where each component stores data to define a machine part, has implementation for UI methods and a factory method which creates instances of the corresponding domain classes, so that i can "convert" a UI assembly to a domain assembly. But there are problems to go back from the created domain hierarchy to the UI hierarchy for showing calculation results in the drawing for example (imagine some parts store some values during the calculation i want to show in the schematic representation after the simluation). Maybe there are some proven patterns for such problems?

  Read the article

• Is it any loose coupling mechanism in Objective-C + Cocoa like C# delegates or C++Qt signals+slots?

  - by Eye of Hell

  Hello. For a large programs, the standard way to chalenge a complexity is to divide a program code into small objects. Most of the actual programming languages offer this functionality via classes, so is Objective-C. But after source code is separated into small object, the second challenge is to somehow connect them with each over. Standard approaches, supported by most languages are compositon (one object is a member field of another), inheritance, templates (generics) and callbacks. More cryptic techniques include method-level delagates (C#) and signals+slots (C++Qt). I like the delegates / signals idea, since while connecting two objects i can connect individual methods with each over, without objects knowing anything of each over. For C#, it will look like this: var object1 = new CObject1(); var object2 = new CObject2(); object1.SomethingHappened += object2.HandleSomething; In this code, is object1 calls it's SomethingHappened delegate (like a normal method call) the HandleSomething method of object2 will be called. For C++Qt, it will look like this: var object1 = new CObject1(); var object2 = new CObject2(); connect( object1, SIGNAL(SomethingHappened()), object2, SLOT(HandleSomething()) ); The result will be exactly the same. This technique has some advantages and disadvantages, but generally i like it more than interfaces since if program code base grows i can change connections and add new ones without creating tons of interfaces. After examination of Objective-C i havn't found any way to use this technique i like :(. It seems that Objective-C supports message passing perfectly well, but it requres for object1 to have a pointer to object2 in order to pass it a message. If some object needs to be connected to lots of other objects, in Objective-C i will be forced to give him pointers to each of the objects it must be connected. So, the question :). Is it any approach in Objective-C programming that will closely resemble delegate / signal+slot types of connection, not a 'give first object an entire pointer to second object so it can pass a message to it'. Method-level connections are a bit more preferable to me than object-level connection ^_^.

  Read the article

• Is typeid of type name always evaluated at compile time in c++ ?

  - by cyril42e

  I wanted to check that typeid is evaluated at compile time when used with a type name (ie typeid(int), typeid(std::string)...). To do so, I repeated in a loop the comparison of two typeid calls, and compiled it with optimizations enabled, in order to see if the compiler simplified the loop (by looking at the execution time which is 1us when it simplifies instead of 160ms when it does not). And I get strange results, because sometimes the compiler simplifies the code, and sometimes it does not. I use g++ (I tried different 4.x versions), and here is the program: #include <iostream> #include <typeinfo> #include <time.h> class DisplayData {}; class RobotDisplay: public DisplayData {}; class SensorDisplay: public DisplayData {}; class RobotQt {}; class SensorQt {}; timespec tp1, tp2; const int n = 1000000000; int main() { int avg = 0; clock_gettime(CLOCK_REALTIME, &tp1); for(int i = 0; i < n; ++i) { // if (typeid(RobotQt) == typeid(RobotDisplay)) // (1) compile time // if (typeid(SensorQt) == typeid(SensorDisplay)) // (2) compile time if (typeid(RobotQt) == typeid(RobotDisplay) || typeid(SensorQt) == typeid(SensorDisplay)) // (3) not compile time ???!!! avg++; else avg--; } clock_gettime(CLOCK_REALTIME, &tp2); std::cout << "time (" << avg << "): " << (tp2.tv_sec-tp1.tv_sec)*1000000000+(tp2.tv_nsec-tp1.tv_nsec) << " ns" << std::endl; } The conditions in which this problem appear are not clear, but: - if there is no inheritance involved, no problem (always compile time) - if I do only one comparison, no problem - the problem only appears only with a disjunction of comparisons if all the terms are false So is there something I didn't get with how typeid works (is it always supposed to be evaluated at compilation time when used with type names?) or may this be a gcc bug in evaluation or optimization? About the context, I tracked down the problem to this very simplified example, but my goal is to use typeid with template types (as partial function template specialization is not possible). Thanks for your help!

  Read the article

• Why is my Type.GetFields(BindingFlags.Instance|BindingFlags.Public) not working?

  - by granadaCoder

  My code can see the non-public members, but not the public ones. Why? FieldInfo[] publicFieldInfos = t.GetFields(BindingFlags.Instance | BindingFlags.Public); is returning nothing. Note: I'm trying to get at the properties on the abstract class as well as the concrete class. (And read the attributes as well). The MSDN example works with the 2 flags (BindingFlags.Instance | BindingFlags.Public) but my mini inheritance example below does not. private void RunTest1() { try { textBox1.Text = string.Empty; Type t = typeof(MyInheritedClass); //Look at the BindingFlags *** NonPublic *** int fieldCount = 0; while (null != t) { fieldCount += t.GetFields(BindingFlags.Instance | BindingFlags.NonPublic).Length; FieldInfo[] nonPublicFieldInfos = t.GetFields(BindingFlags.Instance | BindingFlags.NonPublic); foreach (FieldInfo field in nonPublicFieldInfos) { if (null != field) { Console.WriteLine(field.Name); } } t = t.BaseType; } Console.WriteLine("\n\r------------------\n\r"); //Look at the BindingFlags *** Public *** t = typeof(MyInheritedClass); FieldInfo[] publicFieldInfos = t.GetFields(BindingFlags.Instance | BindingFlags.Public); foreach (FieldInfo field in publicFieldInfos) { if (null != field) { Console.WriteLine(field.Name); object[] attributes = field.GetCustomAttributes(t, true); if (attributes != null && attributes.Length > 0) { foreach (Attribute att in attributes) { Console.WriteLine(att.GetType().Name); } } } } } catch (Exception ex) { ReportException(ex); } } private void ReportException(Exception ex) { Exception innerException = ex; while (innerException != null) { Console.WriteLine(innerException.Message + System.Environment.NewLine + innerException.StackTrace + System.Environment.NewLine + System.Environment.NewLine); innerException = innerException.InnerException; } } public abstract class MySuperType { public MySuperType(string st) { this.STString = st; } public string STString { get; set; } public abstract string MyAbstractString { get; set; } } public class MyInheritedClass : MySuperType { public MyInheritedClass(string ic) : base(ic) { this.ICString = ic; } [Description("This is an important property"), Category("HowImportant")] public string ICString { get; set; } private string _oldSchoolPropertyString = string.Empty; public string OldSchoolPropertyString { get { return _oldSchoolPropertyString; } set { _oldSchoolPropertyString = value; } } [Description("This is a not so importarnt property"), Category("HowImportant")] public override string MyAbstractString { get; set; } }

  Read the article

• Why is my (Type).GetFields(BindingFlags.Instance | BindingFlags.Public) not working?

  - by granadaCoder

  My code can see the NonPublic members, but not the Public ones. (???) Full sample code below. FieldInfo[] publicFieldInfos = t.GetFields(BindingFlags.Instance | BindingFlags.Public); is returning nothing. Note, I'm trying to get at the properties on the abstract class as well as the 1 concrete class. (And read the attributes as well). I'm going bonkers on this one....the msdn example works with the 2 flags (BindingFlags.Instance | BindingFlags.Public).....but my mini inheritance example below is not. THANKS in advance. /////////////START CODE private void RunTest1() { try { textBox1.Text = string.Empty; Type t = typeof(MyInheritedClass); //Look at the BindingFlags *** NonPublic *** int fieldCount = 0; while (null != t) { fieldCount += t.GetFields(BindingFlags.Instance | BindingFlags.NonPublic).Length; FieldInfo[] nonPublicFieldInfos = t.GetFields(BindingFlags.Instance | BindingFlags.NonPublic); foreach (FieldInfo field in nonPublicFieldInfos) { if (null != field) { Console.WriteLine(field.Name); } } t = t.BaseType; } Console.WriteLine("\n\r------------------\n\r"); //Look at the BindingFlags *** Public *** t = typeof(MyInheritedClass); FieldInfo[] publicFieldInfos = t.GetFields(BindingFlags.Instance | BindingFlags.Public); foreach (FieldInfo field in publicFieldInfos) { if (null != field) { Console.WriteLine(field.Name); object[] attributes = field.GetCustomAttributes(t, true); if (attributes != null && attributes.Length > 0) { foreach (Attribute att in attributes) { Console.WriteLine(att.GetType().Name); } } } } } catch (Exception ex) { ReportException(ex); } } private void ReportException(Exception ex) { Exception innerException = ex; while (innerException != null) { Console.WriteLine(innerException.Message + System.Environment.NewLine + innerException.StackTrace + System.Environment.NewLine + System.Environment.NewLine); innerException = innerException.InnerException; } } public abstract class MySuperType { public MySuperType(string st) { this.STString = st; } public string STString { get; set; } public abstract string MyAbstractString {get;set;} } public class MyInheritedClass : MySuperType { public MyInheritedClass(string ic) : base(ic) { this.ICString = ic; } [Description("This is an important property"),Category("HowImportant")] public string ICString { get; set; } private string _oldSchoolPropertyString = string.Empty; public string OldSchoolPropertyString { get { return _oldSchoolPropertyString; } set { _oldSchoolPropertyString = value; } } [Description("This is a not so importarnt property"), Category("HowImportant")] public override string MyAbstractString { get; set; } }

  Read the article

• Encapsulating a Windows.Forms.Button

  - by devoured elysium

  I want to define a special kind of button that only allows two possible labels: "ON" and "OFF". I decided to inherit from a Windows.Forms.Button to implement this but now I don't know I how should enforce this rule. Should I just override the Text property like this? public override string Text { set { throw new InvalidOperationException("Invalid operation on StartStopButton!"); } } The problem I see with this is that I am breaking the contract that all buttons should have. If any code tries something like foreach (Button button in myForm) { button.Text = "123"; } they will get an Exception if I have any of my special buttons on the form, which is something that isn't expectable. First, because people think of properties just as "public" variables, not methods, second, because they are used to using and setting whatever they want to buttons without having to worry with Exceptions. Should I instead just make the set property do nothing? That could also lead to awkward results: myButton.Text = "abc"; MessageBox.Show(abc); //not "abc"! The general idea from the OO world is to in this kind of cases use Composition instead of inheritance. public class MySpecialButton : <Some class from System.Windows.Forms that already knows how to draw itself on forms> private Button button = new Button(); //I'd just draw this button on this class //and I'd then only show the fields I consider //relevant to the outside world. ... } But to make the Button "live" on a form it must inherit from some special class. I've looked on Control, but it seems to already have the Text property defined. I guess the ideal situation would be to inherit from some kind of class that wouldn't even have the Text property defined, but that'd have position, size, etc properties available. Upper in the hierarchy, after Control, we have Component, but that looks like a really raw class. Any clue about how to achieve this? I know this was a long post :( Thanks

  Read the article

• ASP.NET Controls – CommunityServer Captcha ControlAdapter, a practical case

  - by nmgomes

  The ControlAdapter is available since .NET framework version 2.0 and his main goal is to adapt and customize a control render in order to achieve a specific behavior or layout. This customization is done without changing the base control. A ControlAdapter is commonly used to custom render for specific platforms like Mobile. In this particular case the ControlAdapter was used to add a specific behavior to a Control. In this  post I will use one adapter to add a Captcha to all WeblogPostCommentForm controls within pontonetpt.com CommunityServer instance. The Challenge The ControlAdapter complexity is usually associated with the complexity/structure of is base control. This case is precisely one of those since base control dynamically load his content (controls) thru several ITemplate. Those of you who already played with ITemplate knows that while it is an excellent option for control composition it also brings to the table a big issue: “Controls defined within a template are not available for manipulation until they are instantiated inside another control.” While analyzing the WeblogPostCommentForm control I found that he uses the ITemplate technique to compose it’s layout and unfortunately I also found that the template content vary from theme to theme. This could have been a problem but luckily WeblogPostCommentForm control template content always contains a submit button with a well known ID (at least I can assume that there are a well known set of IDs). Using this submit button as anchor it’s possible to add the Captcha controls in the correct place. Another important finding was that WeblogPostCommentForm control inherits from the WrappedFormBase control which is the base control for all CommunityServer input forms. Knowing this inheritance link the main goal has changed to became the creation of a base ControlAdapter that  could be extended and customized to allow adding Captcha to: post comments form contact form user creation form. And, with this mind set, I decided to used the following ControlAdapter base class signature :public abstract class WrappedFormBaseCaptchaAdapter<T> : ControlAdapter where T : WrappedFormBase { }Great, but there are still many to do … Captcha The Captcha will be assembled with: A dynamically generated image with a set of random numbers A TextBox control where the image number will be inserted A Validator control to validate whether TextBox numbers match the image numbers This is a common Captcha implementation, is not rocket science and don’t bring any additional problem. The main problem, as told before, is to find the correct anchor control to ensure a correct Captcha control injection. The anchor control can vary by: target control  theme Implementation To support this dynamic scenario I choose to use the following implementation:private List<string> _validAnchorIds = null; protected virtual List<string> ValidAnchorIds { get { if (this._validAnchorIds == null) { this._validAnchorIds = new List<string>(); this._validAnchorIds.Add("btnSubmit"); } return this._validAnchorIds; } } private Control GetAnchorControl(T wrapper) { if (this.ValidAnchorIds == null || this.ValidAnchorIds.Count == 0) { throw new ArgumentException("Cannot be null or empty", "validAnchorNames"); } var q = from anchorId in this.ValidAnchorIds let anchorControl = CSControlUtility.Instance().FindControl(wrapper, anchorId) where anchorControl != null select anchorControl; return q.FirstOrDefault(); } I can now, using the ValidAnchorIds property, configure a set of valid anchor control  Ids. The GetAnchorControl method searches for a valid anchor control within the set of valid control Ids. Here, some of you may question why to use a LINQ To Objects expression, but the important here is to notice the usage of CSControlUtility.Instance().FindControl CommunityServer method. I want to build on top of CommunityServer not to reinvent the wheel. Assuming that an anchor control was found, it’s now possible to inject the Captcha at the correct place. This not something new, we do this all the time when creating server controls or adding dynamic controls:protected sealed override void CreateChildControls() { base.CreateChildControls(); if (this.IsCaptchaRequired) { T wrapper = base.Control as T; if (wrapper != null) { Control anchorControl = GetAnchorControl(wrapper); if (anchorControl != null) { Panel phCaptcha = new Panel {CssClass = "CommonFormField", ID = "Captcha"}; int index = anchorControl.Parent.Controls.IndexOf(anchorControl); anchorControl.Parent.Controls.AddAt(index, phCaptcha); CaptchaConfiguration.DefaultProvider.AddCaptchaControls( phCaptcha, GetValidationGroup(wrapper, anchorControl)); } } } } Here you can see a new entity in action: a provider. This is a CaptchaProvider class instance and is only goal is to create the Captcha itself and do everything else is needed to ensure is correct operation.public abstract class CaptchaProvider : ProviderBase { public abstract void AddCaptchaControls(Panel captchaPanel, string validationGroup); } You can create your own specific CaptchaProvider class to use different Captcha strategies including the use of existing Captcha services  like ReCaptcha. Once the generic ControlAdapter was created became extremely easy to created a specific one. Here is the specific ControlAdapter for the WeblogPostCommentForm control:public class WeblogPostCommentFormCaptchaAdapter : WrappedFormBaseCaptchaAdapter<WrappedFormBase> { #region Overriden Methods protected override List<string> ValidAnchorIds { get { List<string> validAnchorNames = base.ValidAnchorIds; validAnchorNames.Add("CommentSubmit"); return validAnchorNames; } } protected override string DefaultValidationGroup { get { return "CreateCommentForm"; } } #endregion Overriden Methods } Configuration This is the magic step. Without changing the original pages and keeping the application original assemblies untouched we are going to add a new behavior to the CommunityServer application. To glue everything together you must follow this steps: Add the following configuration to default.browser file:<?xml version='1.0' encoding='utf-8'?> <browsers> <browser refID="Default"> <controlAdapters> <!-- Adapter for the WeblogPostCommentForm control in order to add the Captcha and prevent SPAM comments --> <adapter controlType="CommunityServer.Blogs.Controls.WeblogPostCommentForm" adapterType="NunoGomes.CommunityServer.Components.WeblogPostCommentFormCaptchaAdapter, NunoGomes.CommunityServer" /> </controlAdapters> </browser> </browsers> Add the following configuration to web.config file:<configuration> <configSections> <!-- New section for Captcha providers configuration --> <section name="communityServer.Captcha" type="NunoGomes.CommunityServer.Captcha.Configuration.CaptchaSection" /> </configSections> <!-- Configuring a simple Captcha provider --> <communityServer.Captcha defaultProvider="simpleCaptcha"> <providers> <add name="simpleCaptcha" type="NunoGomes.CommunityServer.Captcha.Providers.SimpleCaptchaProvider, NunoGomes.CommunityServer" imageUrl="~/captcha.ashx" enabled="true" passPhrase="_YourPassPhrase_" saltValue="_YourSaltValue_" hashAlgorithm="SHA1" passwordIterations="3" keySize="256" initVector="_YourInitVectorWithExactly_16_Bytes_" /> </providers> </communityServer.Captcha> <system.web> <httpHandlers> <!-- The Captcha Image handler used by the simple Captcha provider --> <add verb="GET" path="captcha.ashx" type="NunoGomes.CommunityServer.Captcha.Providers.SimpleCaptchaProviderImageHandler, NunoGomes.CommunityServer" /> </httpHandlers> </system.web> <system.webServer> <handlers accessPolicy="Read, Write, Script, Execute"> <!-- The Captcha Image handler used by the simple Captcha provider --> <add verb="GET" name="captcha" path="captcha.ashx" type="NunoGomes.CommunityServer.Captcha.Providers.SimpleCaptchaProviderImageHandler, NunoGomes.CommunityServer" /> </handlers> </system.webServer> </configuration> Conclusion Building a ControlAdapter can be complex but the reward is his ability to allows us, thru configuration changes, to modify an application render and/or behavior. You can see this ControlAdapter in action here and here (anonymous required). A complete solution is available in “CommunityServer Extensions” Codeplex project.

  Read the article

• Overwriting TFS Web Services

  - by javarg

  In this blog I will share a technique I used to intercept TFS Web Services calls. This technique is a very invasive one and requires you to overwrite default TFS Web Services behavior. I only recommend taking such an approach when other means of TFS extensibility fail to provide the same functionality (this is not a supported TFS extensibility point). For instance, intercepting and aborting a Work Item change operation could be implemented using this approach (consider TFS Subscribers functionality before taking this approach, check Martin’s post about subscribers). So let’s get started. The technique consists in versioning TFS Web Services .asmx service classes. If you look into TFS’s ASMX services you will notice that versioning is supported by creating a class hierarchy between different product versions. For instance, let’s take the Work Item management service .asmx. Check the following .asmx file located at: %Program Files%\Microsoft Team Foundation Server 2010\Application Tier\Web Services\_tfs_resources\WorkItemTracking\v3.0\ClientService.asmx The .asmx references the class Microsoft.TeamFoundation.WorkItemTracking.Server.ClientService3: <%-- Copyright (c) Microsoft Corporation. All rights reserved. --%> <%@ webservice language="C#" Class="Microsoft.TeamFoundation.WorkItemTracking.Server.ClientService3" %> .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } The inheritance hierarchy for this service class follows: Note the naming convention used for service versioning (ClientService3, ClientService2, ClientService). We will need to overwrite the latest service version provided by the product (in this case ClientService3 for TFS 2010). The following example intercepts and analyzes WorkItem fields. Suppose we need to validate state changes with more advanced logic other than the provided validations/constraints of the process template. Important: Backup the original .asmx file and create one of your own. Create a Visual Studio Web App Project and include a new ASMX Web Service in the project Add the following references to the project (check the folder %Program Files%\Microsoft Team Foundation Server 2010\Application Tier\Web Services\bin\): Microsoft.TeamFoundation.Framework.Server.dll Microsoft.TeamFoundation.Server.dll Microsoft.TeamFoundation.Server.dll Microsoft.TeamFoundation.WorkItemTracking.Client.QueryLanguage.dll Microsoft.TeamFoundation.WorkItemTracking.Server.DataAccessLayer.dll Microsoft.TeamFoundation.WorkItemTracking.Server.DataServices.dll Replace the default service implementation with the something similar to the following code: Code Snippet /// <summary> /// Inherit from ClientService3 to overwrite default Implementation /// </summary> [WebService(Namespace = "http://schemas.microsoft.com/TeamFoundation/2005/06/WorkItemTracking/ClientServices/03", Description = "Custom Team Foundation WorkItemTracking ClientService Web Service")] public class CustomTfsClientService : ClientService3 {     [WebMethod, SoapHeader("requestHeader", Direction = SoapHeaderDirection.In)]     public override bool BulkUpdate(         XmlElement package,         out XmlElement result,         MetadataTableHaveEntry[] metadataHave,         out string dbStamp,         out Payload metadata)     {         var xe = XElement.Parse(package.OuterXml);         // We only intercept WorkItems Updates (we can easily extend this sample to capture any operation).         var wit = xe.Element("UpdateWorkItem");         if (wit != null)         {             if (wit.Attribute("WorkItemID") != null)             {                 int witId = (int)wit.Attribute("WorkItemID");                 // With this Id. I can query TFS for more detailed information, using TFS Client API (assuming the WIT already exists).                 var stateChanged =                     wit.Element("Columns").Elements("Column").FirstOrDefault(c => (string)c.Attribute("Column") == "System.State");                 if (stateChanged != null)                 {                     var newStateName = stateChanged.Element("Value").Value;                     if (newStateName == "Resolved")                     {                         throw new Exception("Cannot change state to Resolved!");                     }                 }             }         }         // Finally, we call base method implementation         return base.BulkUpdate(package, out result, metadataHave, out dbStamp, out metadata);     } } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } 4. Build your solution and overwrite the original .asmx with the new implementation referencing our new service version (don’t forget to backup it up first). 5. Copy your project’s .dll into the following path: %Program Files%\Microsoft Team Foundation Server 2010\Application Tier\Web Services\bin 6. Try saving a WorkItem into the Resolved state. Enjoy!

  Read the article

• LLBLGen Pro v3.1 released!

  - by FransBouma

  Yesterday we released LLBLGen Pro v3.1! Version 3.1 comes with new features and enhancements, which I'll describe briefly below. v3.1 is a free upgrade for v3.x licensees. What's new / changed? Designer Extensible Import system. An extensible import system has been added to the designer to import project data from external sources. Importers are plug-ins which import project meta-data (like entity definitions, mappings and relational model data) from an external source into the loaded project. In v3.1, an importer plug-in for importing project elements from existing LLBLGen Pro v3.x project files has been included. You can use this importer to create source projects from which you import parts of models to build your actual project with. Model-only relationships. In v3.1, relationships of the type 1:1, m:1 and 1:n can be marked as model-only. A model-only relationship isn't required to have a backing foreign key constraint in the relational model data. They're ideal for projects which have to work with relational databases where changes can't always be made or some relationships can't be added to (e.g. the ones which are important for the entity model, but are not allowed to be added to the relational model for some reason). Custom field ordering. Although fields in an entity definition don't really have an ordering, it can be important for some situations to have the entity fields in a given order, e.g. when you use compound primary keys. Field ordering can be defined using a pop-up dialog which can be opened through various ways, e.g. inside the project explorer, model view and entity editor. It can also be set automatically during refreshes based on new settings. Command line relational model data refresher tool, CliRefresher.exe. The command line refresh tool shipped with v2.6 is now available for v3.1 as well Navigation enhancements in various designer elements. It's now easier to find elements like entities, typed views etc. in the project explorer from editors, to navigate to related entities in the project explorer by right clicking a relationship, navigate to the super-type in the project explorer when right-clicking an entity and navigate to the sub-type in the project explorer when right-clicking a sub-type node in the project explorer. Minor visual enhancements / tweaks LLBLGen Pro Runtime Framework Entity creation is now up to 30% faster and takes 5% less memory. Creating an entity object has been optimized further by tweaks inside the framework to make instantiating an entity object up to 30% faster. It now also takes up to 5% less memory than in v3.0 Prefetch Path node merging is now up to 20-25% faster. Setting entity references required the creation of a new relationship object. As this relationship object is always used internally it could be cached (as it's used for syncing only). This increases performance by 20-25% in the merging functionality. Entity fetches are now up to 20% faster. A large number of tweaks have been applied to make entity fetches up to 20% faster than in v3.0. Full WCF RIA support. It's now possible to use your LLBLGen Pro runtime framework powered domain layer in a WCF RIA application using the VS.NET tools for WCF RIA services. WCF RIA services is a Microsoft technology for .NET 4 and typically used within silverlight applications. SQL Server DQE compatibility level is now per instance. (Usable in Adapter). It's now possible to set the compatibility level of the SQL Server Dynamic Query Engine (DQE) per instance of the DQE instead of the global setting it was before. The global setting is still available and is used as the default value for the compatibility level per-instance. You can use this to switch between CE Desktop and normal SQL Server compatibility per DataAccessAdapter instance. Support for COUNT_BIG aggregate function (SQL Server specific). The aggregate function COUNT_BIG has been added to the list of available aggregate functions to be used in the framework. Minor changes / tweaks I'm especially pleased with the import system, as that makes working with entity models a lot easier. The import system lets you import from another LLBLGen Pro v3 project any entity definition, mapping and / or meta-data like table definitions. This way you can build repository projects where you store model fragments, e.g. the building blocks for a customer-order system, a user credential model etc., any model you can think of. In most projects, you'll recognize that some parts of your new model look familiar. In these cases it would have been easier if you would have been able to import these parts from projects you had pre-created. With LLBLGen Pro v3.1 you can. For example, say you have an Oracle schema called CRM which contains the bread 'n' butter customer-order-product kind of model. You create an entity model from that schema and save it in a project file. Now you start working on another project for another customer and you have to use SQL Server. You also start using model-first development, so develop the entity model from scratch as there's no existing database. As this customer also requires some CRM like entity model, you import the entities from your saved Oracle project into this new SQL Server targeting project. Because you don't work with Oracle this time, you don't import the relational meta-data, just the entities, their relationships and possibly their inheritance hierarchies, if any. As they're now entities in your project you can change them a bit to match the new customer's requirements. This can save you a lot of time, because you can re-use pre-fab model fragments for new projects. In the example above there are no tables yet (as you work model first) so using the forward mapping capabilities of LLBLGen Pro v3 creates the tables, PK constraints, Unique Constraints and FK constraints for you. This way you can build a nice repository of model fragments which you can re-use in new projects.

  Read the article

• Code excavations, wishful invocations, perimeters and domain specific unit test frameworks

  - by RoyOsherove

  One of the talks I did at QCON London was about a subject that I’ve come across fairly recently , when I was building SilverUnit – a “pure” unit test framework for silverlight objects that depend on the silverlight runtime to run. It is the concept of “cogs in the machine” – when your piece of code needs to run inside a host framework or runtime that you have little or no control over for testability related matters. Examples of such cogs and machines can be: your custom control running inside silverlight runtime in the browser your plug-in running inside an IDE your activity running inside a windows workflow your code running inside a java EE bean your code inheriting from a COM+ (enterprise services) component etc.. Not all of these are necessarily testability problems. The main testability problem usually comes when your code actually inherits form something inside the system. For example. one of the biggest problems with testing objects like silverlight controls is the way they depend on the silverlight runtime – they don’t implement some silverlight interface, they don’t just call external static methods against the framework runtime that surrounds them – they actually inherit parts of the framework: they all inherit (in this case) from the silverlight DependencyObject Wrapping it up? An inheritance dependency is uniquely challenging to bring under test, because “classic” methods such as wrapping the object under test with a framework wrapper will not work, and the only way to do manually is to create parallel testable objects that get delegated with all the possible actions from the dependencies.    In silverlight’s case, that would mean creating your own custom logic class that would be called directly from controls that inherit from silverlight, and would be tested independently of these controls. The pro side is that you get the benefit of understanding the “contract” and the “roles” your system plays against your logic, but unfortunately, more often than not, it can be very tedious to create, and may sometimes feel unnecessary or like code duplication. About perimeters A perimeter is that invisible line that your draw around your pieces of logic during a test, that separate the code under test from any dependencies that it uses. Most of the time, a test perimeter around an object will be the list of seams (dependencies that can be replaced such as interfaces, virtual methods etc.) that are actually replaced for that test or for all the tests. Role based perimeters In the case of creating a wrapper around an object – one really creates a “role based” perimeter around the logic that is being tested – that wrapper takes on roles that are required by the code under test, and also communicates with the host system to implement those roles and provide any inputs to the logic under test. in the image below – we have the code we want to test represented as a star. No perimeter is drawn yet (we haven’t wrapped it up in anything yet). in the image below is what happens when you wrap your logic with a role based wrapper – you get a role based perimeter anywhere your code interacts with the system: There’s another way to bring that code under test – using isolation frameworks like typemock, rhino mocks and MOQ (but if your code inherits from the system, Typemock might be the only way to isolate the code from the system interaction.   Ad-Hoc Isolation perimeters the image below shows what I call ad-hoc perimeter that might be vastly different between different tests: This perimeter’s surface is much smaller, because for that specific test, that is all the “change” that is required to the host system behavior.   The third way of isolating the code from the host system is the main “meat” of this post: Subterranean perimeters Subterranean perimeters are Deep rooted perimeters  - “always on” seams that that can lie very deep in the heart of the host system where they are fully invisible even to the test itself, not just to the code under test. Because they lie deep inside a system you can’t control, the only way I’ve found to control them is with runtime (not compile time) interception of method calls on the system. One way to get such abilities is by using Aspect oriented frameworks – for example, in SilverUnit, I’ve used the CThru AOP framework based on Typemock hooks and CLR profilers to intercept such system level method calls and effectively turn them into seams that lie deep down at the heart of the silverlight runtime. the image below depicts an example of what such a perimeter could look like: As you can see, the actual seams can be very far away form the actual code under test, and as you’ll discover, that’s actually a very good thing. Here is only a partial list of examples of such deep rooted seams : disabling the constructor of a base class five levels below the code under test (this.base.base.base.base) faking static methods of a type that’s being called several levels down the stack: method x() calls y() calls z() calls SomeType.StaticMethod()  Replacing an async mechanism with a synchronous one (replacing all timers with your own timer behavior that always Ticks immediately upon calls to “start()” on the same caller thread for example) Replacing event mechanisms with your own event mechanism (to allow “firing” system events) Changing the way the system saves information with your own saving behavior (in silverunit, I replaced all Dependency Property set and get with calls to an in memory value store instead of using the one built into silverlight which threw exceptions without a browser) several questions could jump in: How do you know what to fake? (how do you discover the perimeter?) How do you fake it? Wouldn’t this be problematic  - to fake something you don’t own? it might change in the future How do you discover the perimeter to fake? To discover a perimeter all you have to do is start with a wishful invocation. a wishful invocation is the act of trying to invoke a method (or even just create an instance ) of an object using “regular” test code. You invoke the thing that you’d like to do in a real unit test, to see what happens: Can I even create an instance of this object without getting an exception? Can I invoke this method on that instance without getting an exception? Can I verify that some call into the system happened? You make the invocation, get an exception (because there is a dependency) and look at the stack trace. choose a location in the stack trace and disable it. Then try the invocation again. if you don’t get an exception the perimeter is good for that invocation, so you can move to trying out other methods on that object. in a future post I will show the process using CThru, and how you end up with something close to a domain specific test framework after you’re done creating the perimeter you need.

  Read the article

• LLBLGen Pro feature highlights: grouping model elements

  - by FransBouma

  (This post is part of a series of posts about features of the LLBLGen Pro system) When working with an entity model which has more than a few entities, it's often convenient to be able to group entities together if they belong to a semantic sub-model. For example, if your entity model has several entities which are about 'security', it would be practical to group them together under the 'security' moniker. This way, you could easily find them back, yet they can be left inside the complete entity model altogether so their relationships with entities outside the group are kept. In other situations your domain consists of semi-separate entity models which all target tables/views which are located in the same database. It then might be convenient to have a single project to manage the complete target database, yet have the entity models separate of each other and have them result in separate code bases. LLBLGen Pro can do both for you. This blog post will illustrate both situations. The feature is called group usage and is controllable through the project settings. This setting is supported on all supported O/R mapper frameworks. Situation one: grouping entities in a single model. This situation is common for entity models which are dense, so many relationships exist between all sub-models: you can't split them up easily into separate models (nor do you likely want to), however it's convenient to have them grouped together into groups inside the entity model at the project level. A typical example for this is the AdventureWorks example database for SQL Server. This database, which is a single catalog, has for each sub-group a schema, however most of these schemas are tightly connected with each other: adding all schemas together will give a model with entities which indirectly are related to all other entities. LLBLGen Pro's default setting for group usage is AsVisualGroupingMechanism which is what this situation is all about: we group the elements for visual purposes, it has no real meaning for the model nor the code generated. Let's reverse engineer AdventureWorks to an entity model. By default, LLBLGen Pro uses the target schema an element is in which is being reverse engineered, as the group it will be in. This is convenient if you already have categorized tables/views in schemas, like which is the case in AdventureWorks. Of course this can be switched off, or corrected on the fly. When reverse engineering, we'll walk through a wizard which will guide us with the selection of the elements which relational model data should be retrieved, which we can later on use to reverse engineer to an entity model. The first step after specifying which database server connect to is to select these elements. below we can see the AdventureWorks catalog as well as the different schemas it contains. We'll include all of them. After the wizard completes, we have all relational model data nicely in our catalog data, with schemas. So let's reverse engineer entities from the tables in these schemas. We select in the catalog explorer the schemas 'HumanResources', 'Person', 'Production', 'Purchasing' and 'Sales', then right-click one of them and from the context menu, we select Reverse engineer Tables to Entity Definitions.... This will bring up the dialog below. We check all checkboxes in one go by checking the checkbox at the top to mark them all to be added to the project. As you can see LLBLGen Pro has already filled in the group name based on the schema name, as this is the default and we didn't change the setting. If you want, you can select multiple rows at once and set the group name to something else using the controls on the dialog. We're fine with the group names chosen so we'll simply click Add to Project. This gives the following result:   (I collapsed the other groups to keep the picture small ;)). As you can see, the entities are now grouped. Just to see how dense this model is, I've expanded the relationships of Employee: As you can see, it has relationships with entities from three other groups than HumanResources. It's not doable to cut up this project into sub-models without duplicating the Employee entity in all those groups, so this model is better suited to be used as a single model resulting in a single code base, however it benefits greatly from having its entities grouped into separate groups at the project level, to make work done on the model easier. Now let's look at another situation, namely where we work with a single database while we want to have multiple models and for each model a separate code base. Situation two: grouping entities in separate models within the same project. To get rid of the entities to see the second situation in action, simply undo the reverse engineering action in the project. We still have the AdventureWorks relational model data in the catalog. To switch LLBLGen Pro to see each group in the project as a separate project, open the Project Settings, navigate to General and set Group usage to AsSeparateProjects. In the catalog explorer, select Person and Production, right-click them and select again Reverse engineer Tables to Entities.... Again check the checkbox at the top to mark all entities to be added and click Add to Project. We get two groups, as expected, however this time the groups are seen as separate projects. This means that the validation logic inside LLBLGen Pro will see it as an error if there's e.g. a relationship or an inheritance edge linking two groups together, as that would lead to a cyclic reference in the code bases. To see this variant of the grouping feature, seeing the groups as separate projects, in action, we'll generate code from the project with the two groups we just created: select from the main menu: Project -> Generate Source-code... (or press F7 ;)). In the dialog popping up, select the target .NET framework you want to use, the template preset, fill in a destination folder and click Start Generator (normal). This will start the code generator process. As expected the code generator has simply generated two code bases, one for Person and one for Production: The group name is used inside the namespace for the different elements. This allows you to add both code bases to a single solution and use them together in a different project without problems. Below is a snippet from the code file of a generated entity class. //... using System.Xml.Serialization; using AdventureWorks.Person; using AdventureWorks.Person.HelperClasses; using AdventureWorks.Person.FactoryClasses; using AdventureWorks.Person.RelationClasses; using SD.LLBLGen.Pro.ORMSupportClasses; namespace AdventureWorks.Person.EntityClasses { //... /// <summary>Entity class which represents the entity 'Address'.<br/><br/></summary> [Serializable] public partial class AddressEntity : CommonEntityBase //... The advantage of this is that you can have two code bases and work with them separately, yet have a single target database and maintain everything in a single location. If you decide to move to a single code base, you can do so with a change of one setting. It's also useful if you want to keep the groups as separate models (and code bases) yet want to add relationships to elements from another group using a copy of the entity: you can simply reverse engineer the target table to a new entity into a different group, effectively making a copy of the entity. As there's a single target database, changes made to that database are reflected in both models which makes maintenance easier than when you'd have a separate project for each group, with its own relational model data. Conclusion LLBLGen Pro offers a flexible way to work with entities in sub-models and control how the sub-models end up in the generated code.

  Read the article

• Dynamic Code for type casting Generic Types 'generically' in C#

  - by Rick Strahl

  C# is a strongly typed language and while that's a fundamental feature of the language there are more and more situations where dynamic types make a lot of sense. I've written quite a bit about how I use dynamic for creating new type extensions: Dynamic Types and DynamicObject References in C# Creating a dynamic, extensible C# Expando Object Creating a dynamic DataReader for dynamic Property Access Today I want to point out an example of a much simpler usage for dynamic that I use occasionally to get around potential static typing issues in C# code especially those concerning generic types. TypeCasting Generics Generic types have been around since .NET 2.0 I've run into a number of situations in the past - especially with generic types that don't implement specific interfaces that can be cast to - where I've been unable to properly cast an object when it's passed to a method or assigned to a property. Granted often this can be a sign of bad design, but in at least some situations the code that needs to be integrated is not under my control so I have to make due with what's available or the parent object is too complex or intermingled to be easily refactored to a new usage scenario. Here's an example that I ran into in my own RazorHosting library - so I have really no excuse, but I also don't see another clean way around it in this case. A Generic Example Imagine I've implemented a generic type like this: public class RazorEngine<TBaseTemplateType> where TBaseTemplateType : RazorTemplateBase, new() You can now happily instantiate new generic versions of this type with custom template bases or even a non-generic version which is implemented like this: public class RazorEngine : RazorEngine<RazorTemplateBase> { public RazorEngine() : base() { } } To instantiate one: var engine = new RazorEngine<MyCustomRazorTemplate>(); Now imagine that the template class receives a reference to the engine when it's instantiated. This code is fired as part of the Engine pipeline when it gets ready to execute the template. It instantiates the template and assigns itself to the template: var template = new TBaseTemplateType() { Engine = this } The problem here is that possibly many variations of RazorEngine<T> can be passed. I can have RazorTemplateBase, RazorFolderHostTemplateBase, CustomRazorTemplateBase etc. as generic parameters and the Engine property has to reflect that somehow. So, how would I cast that? My first inclination was to use an interface on the engine class and then cast to the interface.  Generally that works, but unfortunately here the engine class is generic and has a few members that require the template type in the member signatures. So while I certainly can implement an interface: public interface IRazorEngine<TBaseTemplateType> it doesn't really help for passing this generically templated object to the template class - I still can't cast it if multiple differently typed versions of the generic type could be passed. I have the exact same issue in that I can't specify a 'generic' generic parameter, since there's no underlying base type that's common. In light of this I decided on using object and the following syntax for the property (and the same would be true for a method parameter): public class RazorTemplateBase :MarshalByRefObject,IDisposable { public object Engine {get;set; } } Now because the Engine property is a non-typed object, when I need to do something with this value, I still have no way to cast it explicitly. What I really would need is: public RazorEngine<> Engine { get; set; } but that's not possible. Dynamic to the Rescue Luckily with the dynamic type this sort of thing can be mitigated fairly easily. For example here's a method that uses the Engine property and uses the well known class interface by simply casting the plain object reference to dynamic and then firing away on the properties and methods of the base template class that are common to all templates:/// <summary> /// Allows rendering a dynamic template from a string template /// passing in a model. This is like rendering a partial /// but providing the input as a /// </summary> public virtual string RenderTemplate(string template,object model) { if (template == null) return string.Empty; // if there's no template markup if(!template.Contains("@")) return template; // use dynamic to get around generic type casting dynamic engine = Engine; string result = engine.RenderTemplate(template, model); if (result == null) throw new ApplicationException("RenderTemplate failed: " + engine.ErrorMessage); return result; } Prior to .NET 4.0  I would have had to use Reflection for this sort of thing which would have a been a heck of a lot more verbose, but dynamic makes this so much easier and cleaner and in this case at least the overhead is negliable since it's a single dynamic operation on an otherwise very complex operation call. Dynamic as  a Bailout Sometimes this sort of thing often reeks of a design flaw, and I agree that in hindsight this could have been designed differently. But as is often the case this particular scenario wasn't planned for originally and removing the generic signatures from the base type would break a ton of other code in the framework. Given the existing fairly complex engine design, refactoring an interface to remove generic types just to make this particular code work would have been overkill. Instead dynamic provides a nice and simple and relatively clean solution. Now if there were many other places where this occurs I would probably consider reworking the code to make this cleaner but given this isolated instance and relatively low profile operation use of dynamic seems a valid choice for me. This solution really works anywhere where you might end up with an inheritance structure that doesn't have a common base or interface that is sufficient. In the example above I know what I'm getting but there's no common base type that I can cast to. All that said, it's a good idea to think about use of dynamic before you rush in. In many situations there are alternatives that can still work with static typing. Dynamic definitely has some overhead compared to direct static access of objects, so if possible we should definitely stick to static typing. In the example above the application already uses dynamics extensively for dynamic page page templating and passing models around so introducing dynamics here has very little additional overhead. The operation itself also fires of a fairly resource heavy operation where the overhead of a couple of dynamic member accesses are not a performance issue. So, what's your experience with dynamic as a bailout mechanism? © Rick Strahl, West Wind Technologies, 2005-2012Posted in CSharp   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

  Read the article

• CodePlex Daily Summary for Thursday, April 15, 2010

  CodePlex Daily Summary for Thursday, April 15, 2010New ProjectsApplication Logging Repository (ALR): The ALR is a light-weight logging framework that allows applications to log events and exceptions to a central repository.Arkane.FileProperties.DSS: Arkane.FileProperties.Dss is a library for parsing the file header of a .DSS file (as used by Olympus digital dictaphone systems) to obtain time, v...B in conTrol project: This project enables controling log-in and locking your workstation automatically, identifyng you bluetooth.DarkBook: DarkBook is a personal library project.Direct2D for Microsoft .Net: Direct2D, DirectWrite and Windows Imaging wrappers for .Net. This library allows to access Direct2D, DirectWrite and Windows Imaging Windows API f...DJ Ware: DJ Ware is an extensible music player with plugin support and innovative features to organize and explore music files. It is developed with C#, WPF...gpsMe: gpsMe is a Windows Mobile 6.x mapping solution allowing to place the user on a personnalized map. The screen requirements are VGA or WVGA but, you ...jErrorLog: jErrorLog is an error logging component for use in DotNet 2.0 or later applications. It can log error messages to any of the following: database, e...KEMET_API: Java Library (open - source). This library is a help to study egyptian hieroglyphs.Meadow: A web site project for a Swedish floorball team called Slackers. Home page built with ASP.NET 2.0, ASP.NET AJAX and SQL Server 2005.Mustang Math: Mustang Math makes it easier for young children to practice basic math facts on the computer. No keyboard or mouse required - just say the answer!...Net.Formats.oEmbed: oEmbed format implementation in c#. oEmbed is a format for allowing an embedded representation of a URL on third party sites. The simple API allows...Normlize O/R Mapper: Open source O/RM tool that participates with traditional inheritance object models as well as Hibernate/nHibernate style class shells. As I have t...N-Twill Twitter Client for VB.NET: Proyecto de cliente twitter hecho con la libreria TwitterVB2 y hecho en VB.net 2008.SIQM: Spatial Information Quality Management Toolset TIMETABLEASY Web: Under developmentTweetSharp: TweetSharp is a complete .NET library for micro-blogging platforms that allows you to write short and sweet expressions that fly to Twitter, Yammer...UISandbox: UISandbox is a sample C# source code showing how to deal with plugins requiring sandbox, when those plugins must interact with WPF application inte...WinForm SharePoint Web Part Manager: The SharePoint Web Part Manager is a WinForm tool using the SharePoint object model that enables developers and power users to add, update, delete,...WoW Character Viewer: View your World of Warcraft character (or anyone else's character), using this application. Written using Visual Basic Express 2008, then ported t...Xrns2XMod: Xrns2XMod converts from Renoise format (xrns) to mod or xm, which are more compatible formats playable from xmplay or vlc.New ReleasesArkane.FileProperties.DSS: 1.0 stable release: Executables and merge module for 1.0. (See documentation.)Bluetooth Radar: Version 2.0: Add IrDA reference for Bluetooth sending using Obex Add Project icon Add Bluetooth detection mode (Auto close application is there is no blueto...BUtil: BUtil 5.0 Alpha: Backup tasks adding.... in progressChronos WPF: Chronos v1.0 RC 1: Chronos v1.0 RC 1. Development will be feature frozen after this release, only bug fixes will be allowed. Updated nRoute assembly to v0.4 (http:...clipShow: Version 2.5: Release that addresses the canonical syntax issues in search discoverd by Tschachim (thanks again!). Also, the play list and play all menu items s...DarkBook: DarkBook alpha: Hi, here comes the alpha version of Darkbook. It has all the functions already but is still in developing. I hope it's helpful for you, at least it...DirectQ: Release 1.8.3a: Improvements to 1.8.2, which will be shortly be removed. This replaces the original 1.8.3 release from earlier today which had some late-breaking ...Effect Custom Tool for Visual Studio: Effect Custom Tool v1.1: Effect Custom Tool for Visual Studio is a visual studio 2008 extension that helps you generate c# classes from effect (*.fx) files for use with Xna...Folder Bookmarks: Folder Bookmarks 1.4.3: This is the latest version of Folder Bookmarks (1.4.3), with general improvements. It has an installer - it will create a directory 'CPascoe' in My...gpsMe: gpsMe v0.3: Required Hardware Windows Mobile 6 .Net Compact Framework 3.5 integrated gps device VGA or WVGA screen (normally works on others)IST435: Lab 4 - Enterprise Level CMS with DotNetNuke: Lab 4 - Enterprise Level CMS with DotNetNukeThis is the "starter kit" that you must base your Lab 4 on. This lab must be completed in-class.Mouse Jiggler: MouseJiggle-1.1: 1.1 release of Mouse Jiggler, now with x64 compatibility and the ability to start jiggling on run with the --jiggle or -j command-line switch.Mustang Math: MustangMath.exe: This is a quick and dirty "0.1" prototype to demonstrate the speech recognition idea. It starts asking you questions automatically on launch and k...MvcContrib: a Codeplex Foundation project: 2.0.36.0 for MVC2 (RTW): Please see the Change Log for a complete list of changes. MVC BootCamp Description of the releases: MvcContrib.Release.zip MvcContrib.dll MvcC...Nito.LINQ: Beta (v0.3): New features for this release: Several new supported platforms (see below). PDBs that are source-indexed to the appropriate CodePlex changeset. ...OpenIdPortableArea: 0.1.0.2 OpenIdPortableArea: OpenIdPortableArea.Release: DotNetOpenAuth.dll DotNetOpenAuth.xml MvcContrib.dll MvcContrib.xml OpenIdPortableArea.dll OpenIdPortableAre...PokeIn Comet Ajax Library: PokeIn Sample with Library v0.2: New version of PokeIn library with sample. v0.2 There are new features in this release and no bug detected yet.Project Tru Tiên: Elements-test V1-fix (v2): Là EL test được fix tiếp theo bản fix V1, tạm gọi đây là bản fix V2 của ELtest Trong bản fix này EL được fix thêm vụ Quest, Quest chỉnh sửa đúng t...Rule 18 - Love your clipboard: Rule 18: This is the third public beta for the first version of Rule 18. This version has been updated to support Visual Studio 2010 RTM and .NET 4.0 RTM. ...SevenZipSharp: SevenZipSharp 0.62: Added: Extraction from SFX archives. Now it is possible to unrar RAR self-extractors, unzip ZIP self-extractors, etc. Extraction from DOC, XLS, (...SharePoint Labs: SPLab3001A-FRA-Level200: SPLab3001A-FRA-Level200 This SharePoint Lab will teach the persistence object layer that SharePoint uses to centraly store configuration data and o...TTXPathNavigator: TTXPathNavigator for VS2010: Version for Visual Studio 2010turing machine simulator: SDS: SDS documentVecDraw: VecDraw_0.2.25: Alpha release for test purposesWinForm SharePoint Web Part Manager: Beta 1: First release of the WinForm SharePoitn web part manager toolXrns2XMod: Xrns2XMod 0.5.1: Mod and XM conversion format - No sample data conversion at momentZip Solution: ZipSolution 5.3: Features: 1. Added WaitMsec for visual studio support with getting access to files in post build event; 2. Added ShowTextInToolbars to app.config ...Most Popular ProjectsRawrWBFS ManagerAJAX Control ToolkitMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitWindows Presentation Foundation (WPF)ASP.NETMicrosoft SQL Server Community & SamplesPHPExcelpatterns & practices – Enterprise LibraryMost Active ProjectsRawrpatterns & practices – Enterprise LibraryGMap.NET - Great Maps for Windows Forms & PresentationFarseer Physics EngineIonics Isapi Rewrite FilterNB_Store - Free DotNetNuke Ecommerce Catalog ModuleBlogEngine.NETjQuery Library for SharePoint Web ServicesDotRasFacebook Developer Toolkit

  Read the article

• SharePoint Upgrade Global Nav Quirks?

  - by elorg

  We're working on a parallel install/upgrade of SharePoint. The client has WSS 2003 on some old hardware. We've installed MOSS 2007 in a medium farm environment. They want to use this as an opportunity to not just upgrade and use the new features, but to also better organize their content and categorize between different site collections. To accommodate, we've created a few site collections per their specifications in the new environment, and when we ran an upgrade test run we ran into a few .. quirks. We made a backup of the old content database, copied it over to the new environment and restored it as a new database. Created a new web app and attached the migrated data to do an in-place upgrade in this new "test" area. This seems pretty standard - no issues. We have to do a little bit of cleanup (e.g. reset pages to site definition, reset themes, and inherit the global nav / top link bar, etc.). Once that's done, we're using stsadm export/import to copy the individual sites over to their ultimate destinations in the various different site collections. So far so good. But then we ran into one particular site that has a link to an .aspx page in the top link bar in WSS 2003 that's not behaving properly after the upgrade. It's just a link to a "dashboard" .aspx page in a doc library - nothing special. It doesn't seem to matter what we do, or what order we do it (in the "test" web app, in the destination web app, or both). In the end, this ONE site will not allow us to create a link/tab in the global nav. It can inherit the global nav just fine. We can break the inheritance just fine. But if we want to manually add a link in the top link bar - we go through the steps that I've done 1,000x before and click OK - and the tab never appears. It doesn't matter if it's to a page within the site itself, or to Google. We can migrate over other sites into the same site collection and add a tab without issue. If we migrate this quirky site over to another site collection we run into the same issue. Yet, in the "test" web app that we're using to upgrade the data we can add a tab? If we add the tab before we export/import to the final destination, the tab is lost during the process? Has anyone run into anything like this? Any ideas? I've tried every combination of everything that I can think of and nothing works. Unless we can figure out how to get this to work, we're going to just add this tab to the global nav for the entire site collection and inherit it for this site (but that adds the link to all of the site that will inherit, which is both a pro & con for them).

  Read the article

• ASP.NET WebAPI Security 3: Extensible Authentication Framework

  - by Your DisplayName here!

  In my last post, I described the identity architecture of ASP.NET Web API. The short version was, that Web API (beta 1) does not really have an authentication system on its own, but inherits the client security context from its host. This is fine in many situations (e.g. AJAX style callbacks with an already established logon session). But there are many cases where you don’t use the containing web application for authentication, but need to do it yourself. Examples of that would be token based authentication and clients that don’t run in the context of the web application (e.g. desktop clients / mobile). Since Web API provides a nice extensibility model, it is easy to implement whatever security framework you want on top of it. My design goals were: Easy to use. Extensible. Claims-based. ..and of course, this should always behave the same, regardless of the hosting environment. In the rest of the post I am outlining some of the bits and pieces, So you know what you are dealing with, in case you want to try the code. At the very heart… is a so called message handler. This is a Web API extensibility point that gets to see (and modify if needed) all incoming and outgoing requests. Handlers run after the conversion from host to Web API, which means that handler code deals with HttpRequestMessage and HttpResponseMessage. See Pedro’s post for more information on the processing pipeline. This handler requires a configuration object for initialization. Currently this is very simple, it contains: Settings for the various authentication and credential types Settings for claims transformation Ability to block identity inheritance from host The most important part here is the credential type support, but I will come back to that later. The logic of the message handler is simple: Look at the incoming request. If the request contains an authorization header, try to authenticate the client. If this is successful, create a claims principal and populate the usual places. If not, return a 401 status code and set the Www-Authenticate header. Look at outgoing response, if the status code is 401, set the Www-Authenticate header. Credential type support Under the covers I use the WIF security token handler infrastructure to validate credentials and to turn security tokens into claims. The idea is simple: an authorization header consists of two pieces: the schema and the actual “token”. My configuration object allows to associate a security token handler with a scheme. This way you only need to implement support for a specific credential type, and map that to the incoming scheme value. The current version supports HTTP Basic Authentication as well as SAML and SWT tokens. (I needed to do some surgery on the standard security token handlers, since WIF does not directly support string-ified tokens. The next version of .NET will fix that, and the code should become simpler then). You can e.g. use this code to hook up a username/password handler to the Basic scheme (the default scheme name for Basic Authentication). config.Handler.AddBasicAuthenticationHandler( (username, password) => username == password); You simply have to provide a password validation function which could of course point back to your existing password library or e.g. membership. The following code maps a token handler for Simple Web Tokens (SWT) to the Bearer scheme (the currently favoured scheme name for OAuth2). You simply have to specify the issuer name, realm and shared signature key: config.Handler.AddSimpleWebTokenHandler(     "Bearer",     http://identity.thinktecture.com/trust,     Constants.Realm,     "Dc9Mpi3jaaaUpBQpa/4R7XtUsa3D/ALSjTVvK8IUZbg="); For certain integration scenarios it is very useful if your Web API can consume SAML tokens. This is also easily accomplishable. The following code uses the standard WIF API to configure the usual SAMLisms like issuer, audience, service certificate and certificate validation. Both SAML 1.1 and 2.0 are supported. var registry = new ConfigurationBasedIssuerNameRegistry(); registry.AddTrustedIssuer( "d1 c5 b1 25 97 d0 36 94 65 1c e2 64 fe 48 06 01 35 f7 bd db", "ADFS"); var adfsConfig = new SecurityTokenHandlerConfiguration(); adfsConfig.AudienceRestriction.AllowedAudienceUris.Add( new Uri(Constants.Realm)); adfsConfig.IssuerNameRegistry = registry; adfsConfig.CertificateValidator = X509CertificateValidator.None; // token decryption (read from configuration section) adfsConfig.ServiceTokenResolver = FederatedAuthentication.ServiceConfiguration.CreateAggregateTokenResolver(); config.Handler.AddSaml11SecurityTokenHandler("SAML", adfsConfig); Claims Transformation After successful authentication, if configured, the standard WIF ClaimsAuthenticationManager is called to run claims transformation and validation logic. This stage is used to transform the “technical” claims from the security token into application claims. You can either have a separate transformation logic, or share on e.g. with the containing web application. That’s just a matter of configuration. Adding the authentication handler to a Web API application In the spirit of Web API this is done in code, e.g. global.asax for web hosting: protected void Application_Start() {     AreaRegistration.RegisterAllAreas();     ConfigureApis(GlobalConfiguration.Configuration);     RegisterGlobalFilters(GlobalFilters.Filters);     RegisterRoutes(RouteTable.Routes);     BundleTable.Bundles.RegisterTemplateBundles(); } private void ConfigureApis(HttpConfiguration configuration) {     configuration.MessageHandlers.Add( new AuthenticationHandler(ConfigureAuthentication())); } private AuthenticationConfiguration ConfigureAuthentication() {     var config = new AuthenticationConfiguration     {         // sample claims transformation for consultants sample, comment out to see raw claims         ClaimsAuthenticationManager = new ApiClaimsTransformer(),         // value of the www-authenticate header, // if not set, the first scheme added to the handler collection is used         DefaultAuthenticationScheme = "Basic"     };     // add token handlers - see above     return config; } You can find the full source code and some samples here. In the next post I will describe some of the samples in the download, and then move on to authorization. HTH

  Read the article

• Google Analytics on Android

  - by pjv

  There is a specific and official analytics SDK for native Android apps (note that I'm not talking about webpages in apps on a phone). This library basically sends pages and events to Google Analytics and you can view your analytics in exactly the same dashboard as for websites. Since my background is apps rather than websites, and since a lot of the Google Analytics terminology seems particularly inapplicable to a native app, I need some pointers. Please discuss my remarks, provide some clarification where you think I'm off-track, and above all share good experiences! 1. Page Views Pages mostly can match different Activities (and Dialogs) being displayed. Activities can be visible behind non-full-screen Activities however, though only the top-level Activity can be interacted. This sort-off clashes with a "(page) view". You'd also want at least one page view for each visit and therefore put one page view tracker in the Application class. However this does not constitute a window or sorts. Usually an Activity will open at the same time, so the time spent on that page will have been 0. This will influence your "time spent" statistics. How are these counted anyway? Moreover, there is a loose coupling between the Activities, by means of Intents. A user can, much like on any website, step in at any Activity, although usually this then concerns resuming the application where he left off. This makes that the hierarchy of Activities usually is very flat. And since there are no url's involved. What meaning would using slashes in page titles have, such as "/Home"? All pages would appear on an equal level in the reports, so no content drilldown. Non-unique page views seem to be counted as some kind of indicator of successfulness: how often does the visitor revisit the page. When the user rotates the screen however usually an Activity resumes again, thus making it a new page view. This happens a lot. Maybe a well-thought-through placement of the call might solve this, or placing several, I'm not sure. How to deal with Page Views? 2. Events I'd say there are two sorts: A user event Something that happened, usually as an indirect consequence of the above. The latter particularly is giving me headaches. First of all, many events aren't written in code any more, but pieced logically together by means of Intents. This means that there is no place to put the analytics call. You'd either have to give up this advantage and start doing it the old-fashioned way in favor of good analytics, or, just be missing some events. Secondly, as a developer you're not so much interested in when a user clicks a button, but if the action that should have been performed really was performed and what the result was. There seems to be no clear way to get resulting data into Google Analytics (what's up with the integers? I want to put in Strings!). The same that applies to the flat pages hierarchy, also goes for the event categories. You could do "vertical" categories (topically, that is), but some code is shared "horizontally" and the tracking will be equally shared. Just as with the Intents mechanism, inheritance makes it hard for you to put the tracking in the right places at all times. And I can't really imagine "horizontal" categories. Unless you start making really small categories, such as all the items form the same menu in one category, I have a hard time grasping the concept. Finally, how do you deal with cancelling? Usually you both have an explicit cancel mechanism by ways of a button, as well as the implicit cancel when the "back"-button is pressed to leave the activity and there were no changes. The latter also applies to "saves", when the back button is pressed and there ARE changes. How are you consequently going to catch all these if not by doing all the "back"-button work yourself? How to deal with events? 3. Goals For goal types I have choice of: URL Destination, Time on Site, and Pages/Visit. Most apps don't have a funnel that leads the user to some "registration done" or "order placed" page. Apps have either already been bought (in which case you want to stimulate the user to love your app, so that he might bring on new buyers) or are paid for by in-app ads. So URL Destination is not a very important goal. Time on Site also seems troublesome. First, I have some doubt on how this would be measured. Second, I don't necessarily want my user to spend a lot of time in my already paid app, just be active and content. Equivalently, why not mention how frequent a user uses your app? Regarding Pages/Visit I already mentioned how screen orientation changes blow up the page view numbers. In an app I'd be most interested in events/visit to measure the user's involvement/activity. If he's intensively using the app then he must be loving it right? Furthermore, I also have some small funnels (that do not lead to conversion though) that I want to see streamlined. In my mind those funnels would end in events rather than page views but that seems not to be possible. I could also measure clickthroughs on in-app ads, but then I'd need to track those as Page Views rather than Events, in view of "URL Destination". What are smart goals for apps and how can you fit them on top of Analytics? 4. Optimisation Is there a smart way to manually do what "Website Optimiser" does for websites? Most importantly, how would I track different landing page designs? 5. Traffic Sources Referrals deal with installation time referrals, if you're smart enough to get them included. But perhaps I'd also want to get some data which third-party app sends users to my app to perform some actions (this app interoperability is possible via Intents). Many of the terminologies related to "Traffic Sources" seem totally meaningless and there is no possibility of connecting in AdSense. What are smart uses of this data? 6. Visitors Of the "Browser capabilities", "Network Properties" and "Mobile" tabs, many things are pointless as they have no influence on / relation with my mostly offline app that won't use flash anyway. Only if you drill down far enough, can you get to OS versions, which do matter a lot. I even forgot where you could check what exact Android devices visited. What are smart uses of this data? How can you make the relevant info more prominent? 7. Other No in-page analytics. I have to register my app as a web-url (What!?)?

  Read the article

• ANTS CLR and Memory Profiler In Depth Review (Part 2 of 2 &ndash; Memory Profiler)

  - by ToStringTheory

  One of the things that people might not know about me, is my obsession to make my code as efficient as possible. Many people might not realize how much of a task or undertaking that this might be, but it is surely a task as monumental as climbing Mount Everest, except this time it is a challenge for the mind… In trying to make code efficient, there are many different factors that play a part – size of project or solution, tiers, language used, experience and training of the programmer, technologies used, maintainability of the code – the list can go on for quite some time. I spend quite a bit of time when developing trying to determine what is the best way to implement a feature to accomplish the efficiency that I look to achieve. One program that I have recently come to learn about – Red Gate ANTS Performance (CLR) and Memory profiler gives me tools to accomplish that job more efficiently as well. In this review, I am going to cover some of the features of the ANTS memory profiler set by compiling some hideous example code to test against. Notice As a member of the Geeks With Blogs Influencers program, one of the perks is the ability to review products, in exchange for a free license to the program. I have not let this affect my opinions of the product in any way, and Red Gate nor Geeks With Blogs has tried to influence my opinion regarding this product in any way. Introduction – Part 2 In my last post, I reviewed the feature packed Red Gate ANTS Performance Profiler.  Separate from the Red Gate Performance Profiler is the Red Gate ANTS Memory Profiler – a simple, easy to use utility for checking how your application is handling memory management…  A tool that I wish I had had many times in the past.  This post will be focusing on the ANTS Memory Profiler and its tool set. The memory profiler has a large assortment of features just like the Performance Profiler, with the new session looking nearly exactly alike: ANTS Memory Profiler Memory profiling is not something that I have to do very often…  In the past, the few cases I’ve had to find a memory leak in an application I have usually just had to trace the code of the operations being performed to look for oddities…  Sadly, I have come across more undisposed/non-using’ed IDisposable objects, usually from ADO.Net than I would like to ever see.  Support is not fun, however using ANTS Memory Profiler makes this task easier.  For this round of testing, I am going to use the same code from my previous example, using the WPF application. This time, I will choose the ‘Profile Memory’ option from the ANTS menu in Visual Studio, which launches the solution in its currently configured state/start-up project, and then launches the ANTS Memory Profiler to help.  It prepopulates all of the fields with the current project information, and all I have to do is select the ‘Start Profiling’ option. When the window comes up, it is actually quite barren, just giving ideas on how to work the profiler.  You start by getting to the point in your application that you want to profile, and then taking a ‘Memory Snapshot’.  This performs a full garbage collection, and snapshots the managed heap.  Using the same WPF app as before, I will go ahead and take a snapshot now. As you can see, ANTS is already giving me lots of information regarding the snapshot, however this is just a snapshot.  The whole point of the profiler is to perform an action, usually one where a memory problem is being noticed, and then take another snapshot and perform a diff between them to see what has changed.  I am going to go ahead and generate 5000 primes, and then take another snapshot: As you can see, ANTS is already giving me a lot of new information about this snapshot compared to the last.  Information such as difference in memory usage, fragmentation, class usage, etc…  If you take more snapshots, you can use the dropdown at the top to set your actual comparison snapshots. If you beneath the timeline, you will see a breadcrumb trail showing how best to approach profiling memory using ANTS.  When you first do the comparison, you start on the Summary screen.  You can either use the charts at the bottom, or switch to the class list screen to get to the next step.  Here is the class list screen: As you can see, it lists information about all of the instances between the snapshots, as well as at the bottom giving you a way to filter by telling ANTS what your problem is.  I am going to go ahead and select the Int16[] to look at the Instance Categorizer Using the instance categorizer, you can travel backwards to see where all of the instances are coming from.  It may be hard to see in this image, but hopefully the lightbox (click on it) will help: I can see that all of these instances are rooted to the application through the UI TextBlock control.  This image will probably be even harder to see, however using the ‘Instance Retention Graph’, you can trace an objects memory inheritance up the chain to see its roots as well.  This is a simple example, as this is simply a known element.  Usually you would be profiling an actual problem, and comparing those differences.  I know in the past, I have spotted a problem where a new context was created per page load, and it was rooted into the application through an event.  As the application began to grow, performance and reliability problems started to emerge.  A tool like this would have been a great way to identify the problem quickly. Overview Overall, I think that the Red Gate ANTS Memory Profiler is a great utility for debugging those pesky leaks.  3 Biggest Pros: Easy to use interface with lots of options for configuring profiling session Intuitive and helpful interface for drilling down from summary, to instance, to root graphs ANTS provides an API for controlling the profiler. Not many options, but still helpful. 2 Biggest Cons: Inability to automatically snapshot the memory by interval Lack of complete integration with Visual Studio via an extension panel Ratings Ease of Use (9/10) – I really do believe that they have brought simplicity to the once difficult task of memory profiling.  I especially liked how it stepped you further into the drilldown by directing you towards the best options. Effectiveness (10/10) – I believe that the profiler does EXACTLY what it purports to do.  Features (7/10) – A really great set of features all around in the application, however, I would like to see some ability for automatically triggering snapshots based on intervals or framework level items such as events. Customer Service (10/10) – My entire experience with Red Gate personnel has been nothing but good.  their people are friendly, helpful, and happy! UI / UX (9/10) – The interface is very easy to get around, and all of the options are easy to find.  With a little bit of poking around, you’ll be optimizing Hello World in no time flat! Overall (9/10) – Overall, I am happy with the Memory Profiler and its features, as well as with the service I received when working with the Red Gate personnel.  Thank you for reading up to here, or skipping ahead – I told you it would be shorter!  Please, if you do try the product, drop me a message and let me know what you think!  I would love to hear any opinions you may have on the product. Code Feel free to download the code I used above – download via DropBox

  Read the article

• Print driver installs failing

  - by Kasius

  All of the Windows 7 64-bit Enterprise machines in my organization are failing to install a good number of printer drivers that previously installed without issue. This only happens with printer drivers. And not with all printer drivers. Just some. Network drivers, video drivers, etc. have had no problems. Here is part of setupapi.dev.log for a Dymo LabelWriter printer driver that is failing to install: dvi: {Plug and Play Service: Device Install for USBPRINT\DYMOLABELWRITER_450_TURBO\6&538F51D&0&USB001} ump: Creating Install Process: DrvInst.exe 09:36:58.071 ndv: Infpath=C:\Windows\INF\oem0.inf ndv: DriverNodeName=dymo.inf:DYMO.NTamd64.6.0:LW_450_TURBO_VISTA:8.1.0.363:usbprint\dymolabelwriter_450_aa08 ndv: DriverStorepath=C:\Windows\System32\DriverStore\FileRepository\dymo.inf_amd64_neutral_3a631b118b7a5828\dymo.inf ndv: Building driver list from driver node strong name... dvi: Searching for hardware ID(s): dvi: usbprint\dymolabelwriter_450_aa08 dvi: dymolabelwriter_450_aa08 inf: Opened PNF: 'C:\Windows\System32\DriverStore\FileRepository\dymo.inf_amd64_neutral_3a631b118b7a5828\dymo.inf' ([strings]) dvi: Selected driver installs from section [LW_450_TURBO_VISTA] in 'c:\windows\system32\driverstore\filerepository\dymo.inf_amd64_neutral_3a631b118b7a5828\dymo.inf'. dvi: Class GUID of device changed to: {4d36e979-e325-11ce-bfc1-08002be10318}. dvi: Set selected driver complete. ndv: {Core Device Install} 09:36:58.133 inf: Opened INF: 'C:\Windows\INF\oem0.inf' ([strings]) inf: Saved PNF: 'C:\Windows\INF\oem0.PNF' (Language = 0409) dvi: {DIF_ALLOW_INSTALL} 09:36:58.164 dvi: Using exported function 'ClassInstall32' in module 'C:\Windows\system32\ntprint.dll'. dvi: Class installer == ntprint.dll,ClassInstall32 dvi: No CoInstallers found dvi: Class installer: Enter 09:36:58.164 dvi: Class installer: Exit dvi: Default installer: Enter 09:36:58.180 dvi: Default installer: Exit dvi: {DIF_ALLOW_INSTALL - exit(0xe000020e)} 09:36:58.180 ndv: Installing files... dvi: {DIF_INSTALLDEVICEFILES} 09:36:58.180 dvi: Class installer: Enter 09:36:58.180 inf: Opened INF: 'C:\Windows\System32\DriverStore\FileRepository\dymo.inf_amd64_neutral_3a631b118b7a5828\dymo.inf' ([strings]) inf: Opened INF: 'C:\Windows\System32\DriverStore\FileRepository\dymo.inf_amd64_neutral_3a631b118b7a5828\dymo.inf' ([strings]) !!! dvi: Class installer: failed(0x00000490)! !!! dvi: Error 1168: Element not found. dvi: {DIF_INSTALLDEVICEFILES - exit(0x00000490)} 09:37:22.063 ndv: Device install status=0x00000490 ndv: Performing device install final cleanup... ! ndv: Queueing up error report since device installation failed... ndv: {Core Device Install - exit(0x00000490)} 09:37:22.063 dvi: {DIF_DESTROYPRIVATEDATA} 09:37:22.063 dvi: Class installer: Enter 09:37:22.063 dvi: Class installer: Exit dvi: Default installer: Enter 09:37:22.063 dvi: Default installer: Exit dvi: {DIF_DESTROYPRIVATEDATA - exit(0xe000020e)} 09:37:22.063 ump: Server install process exited with code 0x00000490 09:37:22.063 ump: {Plug and Play Service: Device Install exit(00000490)} Notice these lines in particular: !!! dvi: Class installer: failed(0x00000490)! !!! dvi: Error 1168: Element not found. dvi: {DIF_INSTALLDEVICEFILES - exit(0x00000490)} 09:37:22.063 ndv: Device install status=0x00000490 From what I have read, the "Element not found" error should be accompanied by an event describing what element was not found. The error that appears in Device Manager is "The driver cannot be installed because it is either not digitally signed or not signed in the appropriate manner." It appears to be signed fine though. It has an accompanying .CAT file and worked previously. And when installing, the following messages are logged in setupapi.dev.log: sto: {DRIVERSTORE_IMPORT_NOTIFY_VALIDATE} 09:36:56.277 inf: Opened INF: 'C:\Windows\System32\DriverStore\Temp\{272e2305-961c-7942-9ede-966f01047043}\dymo.inf' ([strings]) sig: {_VERIFY_FILE_SIGNATURE} 09:36:56.292 sig: Key = dymo.inf sig: FilePath = C:\Windows\System32\DriverStore\Temp\{272e2305-961c-7942-9ede-966f01047043}\dymo.inf sig: Catalog = C:\Windows\System32\DriverStore\Temp\{272e2305-961c-7942-9ede-966f01047043}\DYMO.CAT sig: Success: File is signed in catalog. sig: {_VERIFY_FILE_SIGNATURE exit(0x00000000)} 09:36:56.355 sto: Validating driver package files against catalog 'DYMO.CAT'. sto: Driver package is valid. sto: {DRIVERSTORE_IMPORT_NOTIFY_VALIDATE exit(0x00000000)} 09:36:56.402 sto: Verified driver package signature: sto: Digital Signer Score = 0x0D000005 sto: Digital Signer Name = Microsoft Windows Hardware Compatibility Publisher Now here's where it gets strange. If I take it off the domain, it installs fine. But it doesn't seem to have anything to do with Group Policy. I moved the machine to an OU that blocks inheritance, ran a gpupdate, ran rsop.msc to verify, and tried again. And it still didn't work. Likewise, I removed a machine from the domain, manually set all of the domain Group Policy settings in gpedit.msc, and tried that way, and it worked fine. So it seems like the Group Policy settings are irrelevant. What other domain-related issue could be causing this though? Any ideas on what to try next would be greatly appreciated. I'm not sure where to go from here. Thanks!

  Read the article

< Previous Page | 54 55 56 57 58 59 60  | Next Page >