Search Results

Search found 7606 results on 305 pages for 'tmax dev'.

Page 58/305 | < Previous Page | 54 55 56 57 58 59 60 61 62 63 64 65  | Next Page >

• Ubuntu 10.10 USB drive not showing

  - by Ben

  USB is detecting but not showing the drives or mount details. Nothing there inside my /media folder and /mnt folder. I already enabled automatic mount and give privilege to user also. My sudo fdisk -l shows like: Disk /dev/sda: 250.1 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000d3ba7 Device Boot Start End Blocks Id System /dev/sda1 * 1 29637 238053376 83 Linux /dev/sda2 29637 30402 6142977 5 Extended /dev/sda5 29637 30402 6142976 82 Linux swap / Solaris Any idea?

  Read the article

• USB and CD data cannot be read or mounted in 12.10

  - by aravind4j

  I'm using Ubuntu 12.10. I wrote a data disk using Brasero Disk Burner, but the system cannot read the CD. I tried to write the same data into my HP v220w pen drive but now there is an error in that too. It shows the following: Error mounting /dev/sdb at /media/aravind4j/Aravind4j: Command-line `mount -t "ntfs" -o "uhelper=udisks2,nodev,nosuid,uid=1000,gid=1000,dmask=0077,fmask=0177" "/dev/sdb" "/media/aravind4j/Aravind4j"' exited with non-zero exit status 13: $MFTMirr does not match $MFT (record 0). Failed to mount '/dev/sdb': Input/output error NTFS is either inconsistent, or there is a hardware fault, or it's a SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows then reboot into Windows twice. The usage of the /f parameter is very important! If the device is a SoftRAID/FakeRAID then first activate it and mount a different device under the /dev/mapper/ directory, (e.g. /dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation for more details. (udisks-error-quark, 0) I used a NTFS file system for the pen drive as you can recognize from the above statement. I would like to recover the files so please help me recover the files without formatting the drive.

  Read the article

• GParted tells me my partition has 1.30 GiB used space but I cannot access its contents

  - by reprogrammer

  I've a ext4 partition (/dev/sda7) for my Linux. And, another (/dev/sda5) for keeping my data. When I installing Ubuntu 10.04 LTS, I set the mount point of /dev/sda5 to "/" and that of /dev/sda5 to "/data". GParted tells me that 1.30 GiB out of 70.12 GiB of /dev/sda5 has been used up. But, the mounted directory "/data" is empty. So, it looks like that my data is there but I cannot access it. Besides, when I set the mount point, I didn't check the "format" box. So, it shouldn't have been formatted. How can I check whether the partition has been formatted? How can I recover my files?

  Read the article

• Why won't Kubuntu load my CD?

  - by Visualblocks

  I'm running Kubuntu 12.04.1 LTS and Kubuntu hasn't recognised my CD! Here are the results of a sudo fdisk -l: Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x000c5a81 Device Boot Start End Blocks Id System /dev/sda1 * 2048 964603903 482300928 83 Linux /dev/sda2 964605950 976771071 6082561 5 Extended Partition 2 does not start on physical sector boundary. /dev/sda5 964605952 976771071 6082560 82 Linux swap / Solaris How am I meant to view it in say, Dolphin?

  Read the article

• Ubuntu dual boot and grub error 18

  - by srboisvert

  I've attempted to install 9.04 on an older toshiba laptop with a new 300GB drive and am getting the dreaded Grub error 18 that indicates that grub is looking beyond the bios readable area of the HD and failing. I just let ubuntu roll with its default selections when installing and ended up with this: Drive layout /dev/sda1 -ntfs 128GB -boot /dev/sda2 -extended 170GB -lba /dev/sda5 -ntfs 167.59GB /dev/sda6 -ext3 2.33GB /dev/sda7 -linux-swap 172MB I'd like make the system dual bootable without having to reinstall windows (real pain since I would have to go through an obstructionist IT dept). I know I can make windows bootable with a rescue disk and fixmbr but is there something I can do to make it dual bootable using the ubuntu livecd? Alternately, what should I have done at the partition stage of ubuntu installation to avoid this?

  Read the article

• Resize ntfs system partitions with GParted?

  - by ane

  Trying to resize 2 ntfs system and boot partitions (windows 2003 server) using GParted. Goal: Resize D: (/dev/sda1) to ~850G - this is the boot drive with D:\ntldr, boot.ini, etc. Resize C: (/dev/sda5) to 100G - this is the system drive with C:\windows Tried resizing /dev/sda5 first and got the chkdsk error shown in screenshot #2. (You must run chkdsk /f). Have already run chkdsk /f on C: multiple times with no bad sectors or errors found. Have also run multiple chkdsk /f's on the underlying hard disk multiple times and rebooted way more than a couple times with the same error. How do you force gparted to ignore this error and resize? I found there is --force option to ntfsresize but don't know how to get the GParted ISO live CD to use it. How do you move the unallocated space so an extra ~750G is to the right of /dev/sda1 (D:), and an extra 10G to the right of /dev/sda5 (C:)

  Read the article

• How to install Ubuntu 12.04.1 in EFI mode with Encrypted LVM?

  - by g0lem

  I'm trying to properly install Ubuntu 12.04.1 LTS 64-bit PC (AMD64) with the alternate install CD ".iso" on a lenovo Thinkpad X220. Default Hard Disk (with a pre-installed version of Windows 7) has been replaced with a brand new SSD. The UEFI BIOS of the lenovo Thinkpad X220 is set to "UEFI Boot only" & "USB UEFI BIOS Support" is enabled (I'm using an external USB DVD reader to perform Ubuntu installation). The BIOS is a Phoenix SecureCore Tiano, BIOS version is 8DET56WW (1.26). The attempts below are made with the UEFI BIOS settings described above. Here's what I've tried so far: Boot on a live GParted CD Create a GPT partition table Create a FAT32 partition for UEFI System, set the partition to "EF00" type ("boot" flag) Leave remaining space unformated Boot on Ubuntu 12.04.1 LTS 64-bit PC (AMD64) with alternate CD: Perform the install with network updates enabled Use manual partitioning FAT32 partition created with GParted is used as "EFI System partition" Remaining space is set to be used as "Physical volume for LVM" Then "Configure encrypted volumes" using the previous "Physical volume for LVM" as the encrypted container, passphrase is setup. "Configure the Logical Volume Manager" creating a volume Group using the encrypted container /dev/mapper/sda2_crypt Creation of the Logical Volumes "Create logical volume", choosing the previously created volume Group Assign a mount point and file system to the Logical volumes : LV-root for / LV-var for /var LV-usr for /usr LV-usr-local for /usr/local LV-swap for swap LV-home for /home NOTE: /tmp would be in RAM only using TMPFS Bootloader step: neither my ESP partition (/dev/sda1, /dev/sda or MBR) seems to be the right place for GRUB, I get the following message (X suffix is for demonstration only): unable to install grub in /dev/sdaX Executing 'grub-install /dev/sdaX' failed This is a fatal error. Finish installation without the Bootloader & Reboot The system doesn't start, there's no EFI/GRUB menu at startup. What are the steps to perform a clean and working installation of Ubuntu 12.04.1 Precise Pangolin, 64bit version in U(EFI) mode using the encrypted LUKS + LVM scheme described above?

  Read the article

• install Ubuntu and remove Windows 7

  - by dani

  I'm using Windows 7 on my laptop (2GB RAM, 250 GB HDD). I want to install Ubuntu and remove Windows 7. I have Partitioned my laptop into 2 partitions: , C Drive - 105 GB and D Drive - 145 GB. I want to install Ubuntu on C drive all my data in D drive, no backup I have already selected the "Try something else option " /dev/sdb /dev/sdb1 ntfs 104855 MB unknown C drive /dev/sdb5 ntfs 145192 MB unknown D drive I need help using the "Try Something Else" Option My course of action: laptop power on bootubuntu nextsomething elsepartition.

  Read the article

• SSL/https setup for herokuapp.com address rather than my actual domain

  - by new2ruby

  I have a subdomain of my site pointed to a rails app at mysite.herokuapp.com. I bought a certificate from godaddy and seem to have that all set up correctly. So that when I go to: http://mysite.herokuapp.com or http://dev.mysite.com it's redirected to: https://mysite.herokuapp.com or https://dev.mysite.com The problem is that when I visit dev.mysite.com, I get the error: Safari can't verify the identity of the website. But when I go to mysite.herokuapp.com, I don't get the error. I wanted this to be set up the other way, so that dev.mysite.com did not cause the error. I'm not sure where I went wrong. I used dev.mysite.com when generating the key and when setting it up at godaddy.com. Any ideas where I should look? P.S. The old site is hosted at dreamhost and the DNS info is stored there as well. So I created a subdomain there of type cname which points to mysite.herokuapp.com.

  Read the article

• Not enough free disk space

  - by carmatt95

  I'm new to Ubuntu and I'm getting an error in software updater. When I try and do my daily updates, it says: The upgrade needs a total of 25.3 M free space on disk /boot. Please free at least an additional 25.3 M of disk space on /boot. Empty your trash and remove temporary packages of former installations using sudo apt-get clean. I tried typing in sudo apt-get clean into the terminal but I still get the message. All of the pages I read seem to be for experianced Ubuntuers. Any help would be appreciated. I'm running Ubuntu 12.10. I want to upgrade to 13.04 but understand I have to finish these first. EDIT: @Alaa, This is the output from typing in cat /etc/fstab into the terminal: # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> /dev/mapper/ubuntu-root / ext4 errors=remount-ro 0 1 # /boot was on /dev/sda1 during installation UUID=fa55c082-112d-4b10-bcf3-e7ffec6cebbc /boot ext2 defaults 0 2 /dev/mapper/ubuntu-swap_1 none swap sw 0 0 /dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0 matty@matty-G41M-ES2L:~$ df -h: Filesystem Size Used Avail Use% Mounted on /dev/mapper/ubuntu-root 915G 27G 842G 4% / udev 984M 4.0K 984M 1% /dev tmpfs 397M 1.1M 396M 1% /run none 5.0M 0 5.0M 0% /run/lock none 992M 1.8M 990M 1% /run/shm none 100M 52K 100M 1% /run/user /dev/sda1 228M 222M 0 100% /boot matty@matty-G41M-ES2L:~$ dpkg -l | grep linux-image: ii linux-image-3.5.0-17-generic 3.5.0-17.28 i386 Linux kernel image for version 3.5.0 on 32 bit x86 SMP ii linux-image-3.5.0-18-generic 3.5.0-18.29 i386 Linux kernel image for version 3.5.0 on 32 bit x86 SMP ii linux-image-3.5.0-19-generic 3.5.0-19.30 i386 Linux kernel image for version 3.5.0 on 32 bit x86 SMP ii linux-image-3.5.0-21-generic 3.5.0-21.32 i386 Linux kernel image for version 3.5.0 on 32 bit x86 SMP ii linux-image-3.5.0-22-generic 3.5.0-22.34 i386 Linux kernel image for version 3.5.0 on 32 bit x86 SMP ii linux-image-3.5.0-23-generic 3.5.0-23.35 i386 Linux kernel image for version 3.5.0 on 32 bit x86 SMP ii linux-image-3.5.0-24-generic 3.5.0-24.37 i386 Linux kernel image for version 3.5.0 on 32 bit x86 SMP ii linux-image-3.5.0-25-generic 3.5.0-25.39 i386 Linux kernel image for version 3.5.0 on 32 bit x86 SMP ii linux-image-3.5.0-26-generic 3.5.0-26.42 i386 Linux kernel image for version 3.5.0 on 32 bit x86 SMP iF linux-image-3.5.0-28-generic 3.5.0-28.48 i386 Linux kernel image for version 3.5.0 on 32 bit x86 SMP

  Read the article

• Accessing second hard drive

  - by Jonathan

  So I recently installed Ubuntu 10.10 64-bit on my computer. I installed it on my 60gb SSD hard drive, and in the installation it never acknowledged the existence of my second hard drive. The hard drive that I keep all my files on, and which I want to make my home folder if I can, is a Western Digital Caviar Black 1TB SATA 6Gb/s 64MB cache (WD1002FAEX). I've read the following: https://help.ubuntu.com/community/Mount but honestly cannot work out how to access the hard drive from my Ubuntu installation. I did have Windows 7 64-bit prior to installing Ubuntu. I have backed up all the files on the hard drive, but if I could just access them straight off that would be super cool. Does anyone know how I can use the second hard drive? Thank you for your help EDIT: The following directories are currently in my /dev/ folder: ati/, block/, bsg/, bus/, char/, cpu/, isk/, input/, mapper/, net/, pktcdvd/, pts/, shm/, snd/, and usb/ EDIT: Result from sudo fdisk -l Disk /dev/sda: 60.0 GB, 60022480896 bytes 255 heads, 63 sectors/track, 7297 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000d2dfd Device Boot Start End Blocks Id System /dev/sda1 * 1 6994 56174592 83 Linux /dev/sda2 6994 7298 2438145 5 Extended /dev/sda5 6994 7298 2438144 82 Linux swap / Solaris @djeykib So very close to fixing it.. unfortunately on the last command you gave it says this: $ sudo apt-get install linux-lts-backport-natty Reading package lists... Done Building dependency tree Reading state information... Done E: Unable to locate package linux-lts-backport-natty Checking on http://www.ubuntuupdates.org/ppas reveals that it is only available for 10.04. Looks like I'll have to unplug and re-plug hardware if I want it working still :(

  Read the article

• Debian Raid5 LVM

  - by Develman

  I want to setup a debian server mainly used as data storage. I have 4 devices: /dev/sda (160GB) - installed debian on it /dev/sdb, /dev/sdc, /dev/sdd (all 500GB) - created a raid5 array with it Now I am not sure, how to go on. Is it usefull to create a LVM on the raid5 /dev/md0? How can I do this? Is there a good HowTo? Or can I just create filesystem on the raid5 and create different partitions?

  Read the article

• Why do I get "No root file system is defined" when I try install in one partition?

  - by Emilio

  The thing is that I have 3 partitions on my computer. /dev/sda1 Type: ntfs (size 104MB; 35MB in use) [This is Windows Loader] /dev/sda2 Type: ntfs (size 144598MB; 64536MB in use) [Here I want to install UBUNTU] /dev/sda3 Type: ntfs (size 105353MB; 20227MB in use) [This my backup partition I don't wan't to delete anything from here, I have all my necessary information] So the problem is when I select "Device for boot loader installation" "/dev/sda2" Pops out: "No root file system is defined. Please correct this from the partitioning menu." How can I resolve this? :)

  Read the article

• Linux Read-Ahead Downsides

  - by JPerkSter

  Hi Everyone, Hope all is well. I have a question regarding read-ahead caching. Are there any downsides to raising the size of the read-ahead cache? On our farm, we're currently running at 256, and upon raising that higher, we are seeing significant throughput gains.   [root@server~]# hdparm -tT /dev/sda /dev/sda: Timing cached reads: 7352 MB in 2.00 seconds = 3677.62 MB/sec 3 Timing buffered disk reads: 244 MB in 3.10 seconds = 78.68 MB/sec [root@server ~]# blockdev --setra 10240 /dev/sda [root@server ~]# hdparm -tT /dev/sda /dev/sda: Timing cached reads: 11452 MB in 2.00 seconds = 5728.52 MB/sec Timing buffered disk reads: 422 MB in 3.17 seconds = 133.04 MB/sec We are running on 2.6. Thanks!

  Read the article

• Mounting LVM2 volume with XFS filesystem

  - by Chris

  Unfortunately I'm not able to access the data on my NAS anymore. I can't figure out why this is the case as I haven't changed anything. So I plugged one of the harddisks in my computer to access the data. What I did: kpartx -a /dev/sdc Now I should be able to access /dev/mapper/vg001-lv001 When trying to mount it I get: sudo mount -t xfs /dev/mapper/vg001-lv001 /home/user/mnt mount: /dev/mapper/vg001-lv001: can't read superblock Now I did a parted -l which gave me Modell: Linux device-mapper (linear) (dm) Festplatte /dev/mapper/vg001-lv001: 498GB Sektorgröße (logisch/physisch): 512B/512B Partitionstabelle: loop Number Begin End Size Filesystem Flags 1 0,00B 498GB 498GB xfs Does anybody have a solution how to recover the data?

  Read the article

• Need to know who is hogging my bandwidth?

  - by Dev

  I have an ethernet connection to my iMac and with Internet sharing I am broadcasting the wireless network from my mac rather than using a wireless router. I use it to connect other devices wirelessly to the internet. But this makes all the traffic flow through my iMac. I wanted a way to analyze the traffic so that I know what connected devices are hogging the bandwidth at a given time and from which websites? I installed wireshark for mac and played around a little but it seems like an overkill when you first look at it. Can someone please help with few instructions to get what I need or any other way other than using wireshark? Thanks Dev.

  Read the article

• Why has my Mac been running fsck_hfs for two days now?

  - by Nate

  I first noticed that fsck_hfs was running, taking up 50-75% of a CPU, yesterday. It continues to run today. ps shows that it is doing /sbin/fsck_hfs -f -n -x -E /dev/disk3. Only problem: I don’t think I have a /dev/disk3. Why is it running? Will it ever finish? Can I kill it? What is /dev/disk3? Could it be my Time Machine volume, which is not mounted at the moment? System Info: MacBook Pro (2008). It has two disks installed—the internal disk (/dev/disk1) and a PC Card SSD (/dev/disk0, surprisingly). It connects to a remote Time Machine volume attached to an Airport Extreme base station.

  Read the article

• Dual booting windows 8/ubuntu 12.04.2, Grub doesn't appear and machine never boot in ubuntu

  - by black sensei

  i got a new ACER predator AG3620-UR308 which came with windows 8, so i wanted to run ubuntu 12.04.2 on it as a dual booting. To be honest, i've been doing dual booting for a while now so, i did the right thing. the box came with 2TB HDD. so i made 4 partitions with a raw partition just after the windows installation partition I always do manual installation so even if ubuntu didn't detect windows 8, it was ok for me. So i created swap area and finished the installation etc....Grub was install on the only drive there which is sda. After reboot, grub doesn't even come up.So it always boot in windows 8. I did repeat the installation process twice and yield same result. which is weird because this method always works for me so far.Even the laptop am using to write this post is a dual booting windows 7/ mint nadia installed the same way. Is there anything new in windows 8 that i didn't make provision for? Before starting the installation, all i read about was that , windows 8 should be installed first and ubuntu after. I went ahead and disable secure boot from the BIOS and enabled CSM (don't even know what it means) according to Acer custhelp site . I boot from USB and did fdisk -l bellow is the result: ubuntu@ubuntu:~$ sudo fdisk -l WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x8c361cb5 Device Boot Start End Blocks Id System /dev/sda1 1 3907029167 1953514583+ ee GPT Partition 1 does not start on physical sector boundary. Disk /dev/sdb: 8178 MB, 8178892800 bytes 255 heads, 63 sectors/track, 994 cylinders, total 15974400 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0006a87e Device Boot Start End Blocks Id System /dev/sdb1 * 2048 15972351 7985152 b W95 FAT32 ubuntu@ubuntu:~$ Can anybody shed some light? thank you in advance EDIT Hey, i just did another trial with 13.04 this time and still no luck. bios: secure-boot: disabled enable CSM : always 1-delete previous ubuntu partition and swap area partition.now having free space 2- used usb installer to prepare usb with ubuntu-13.04-desktop-amd64.iso 3- rebooted : liveusb didnt detect windows 8, used something else 4-created partition ext4 for / 5-created partition for swap-area 6- default grub path is /dev/sda and clicked install Acer always boots into windows.

  Read the article

• Dual Frame Buffer on Ubuntu 12.04 Intel HD Graphics 4600 i7-4770

  - by user3692512

  I have 2 monitors connected to the PC, one in HDMI, one in DVI. I have Intel integrated graphics HD4600 Now as far my understanding, both the monitors is connected at the same framebuffer /dev/fb0 How can I detach them and create 2 frame buffers at startup, so that I can directly write to the second monitor, by writing on the /dev/fb1, and not hamper the /dev/fb0, so that x-server can run normally on that?

  Read the article

• df command show no output

  - by user119720

  I'm running the linux distro on my server.When i want to verify the size of the disk, i'm issuing this commnand to get the output. df -h But it does not produce ANY output.Strangely enough when i'm issuing other command such as fdisk -l or du -h it can show output normally. Does anyone now why is this happening?Thanks. edit: here is the output of cat /etc/fstab none /dev/pts devpts rw 0 0 and this is for mount command none on /dev/pts type devpts (rw) none on /proc/sys/fs/binfmt_misc tpe binfmt_misc (rw) edit(2): here is the output of cat /proc/mounts /dev/vzfs / vzfs rw,relatime,usrquota,grpquota 0 0 proc /proc proc rw,relatime 0 0 sysfs /sys sysfs rw,relatime 0 0 none /dev/tmpfs rw,relatime 0 0 none /dev/pts devpts rw,relatime 0 0 none /proc/sys/fs/binfmt_misc binfmt_msc rw,relatime 0 0

  Read the article

• Can I ping via an arbitrary interface of a DD-WRT system? [migrated]

  - by bytebuster

  There's a Linksys WRT54GL router with DD-WRT firmware (v23SP2). The network has a simple dual-WAN configuration (standby mode, switching by a script): ~ # ip route 192.168.3.0/24 dev br0 proto kernel scope link src 192.168.3.1 192.168.2.0/24 dev vlan2 proto kernel scope link src 192.168.2.2 192.168.1.0/24 dev vlan1 proto kernel scope link src 192.168.1.67 127.0.0.0/8 dev lo scope link default via 192.168.2.1 dev vlan2 I'm trying to ping a certain server arbitrary via vlan1 or vlan2. What I tried, as suggested here: ping -I vlan2 <address> ping 192.168.2.1 <address> In both cases ping simply exits with no error messages. Also, ping ignores many other parameters, again, by exiting silently. I failed to find any references that DD-WRT has a limited version of ping whatsoever. I also don't think it can be a permissions issue as mentioned here since the only user with DD-WRT is root. What's wrong?

  Read the article

• "The volume filesystem root has only..."

  - by jcslzr

  I am having this problem in ubuntu 12.04, but I fin strange that when I go to /tmp it wont allow me to delete some files, with message "Operation not permitted" or "this file could not be handled because you dont have permissions to read it". It is only a PC and I have the root password. I was trying to get at least 2000 MB of free space on the root file system to upgrade to 12.10 and see if that resolved the problem. Currently free space on root file system is 190 MB. This is my output: root@jcsalazar-Vostro-3550:~# df Filesystem 1K-blocks Used Available Use% Mounted on /dev/sda6 7688360 7112824 184984 98% / udev 2009288 4 2009284 1% /dev tmpfs 806636 1024 805612 1% /run none 5120 0 5120 0% /run/lock none 2016584 5316 2011268 1% /run/shm /dev/sda5 472036 255920 191745 58% /boot /dev/sda7 30758848 7085480 22110900 25% /home root@jcsalazar-Vostro-3550:~# sudo parted -l Model: ATA TOSHIBA MK3261GS (scsi) Disk /dev/sda: 320GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 1049kB 106MB 105MB primary fat16 2 106MB 15.8GB 15.7GB primary ntfs boot 3 15.8GB 278GB 262GB primary ntfs 4 278GB 320GB 41.9GB extended 5 278GB 279GB 499MB logical ext4 6 279GB 287GB 7999MB logical ext4 7 287GB 319GB 32.0GB logical ext4 8 319GB 320GB 1443MB logical linux-swap(v1) I apprecciate any new ideas that can help me. Thnx Carlos

  Read the article

• root and home are on seperate partitions, but home still uses up space on root?

  - by Void

  When installing Ubuntu 12.10 for the first time, I made sure /home had it's own partition, gave it about 185GB, and gave root ~10GB. Now root is almost full after a few days and I've noticed that root is as big as /home and some additional MB from some actual root files. Note that I deleted some unused files in /home to make sure it really affects how much space is used in root, and it clearly does. (checked in gparted) I've also made sure the files I am talking about are actually in /home/myname/ and not just in root's home. df -h spits out this information: df: `/root/.gvfs': Permission denied Filesystem Size Used Avail Use% Mounted on /dev/sdb2 9.2G 7.9G 908M 90% / udev 3.9G 12K 3.9G 1% /dev tmpfs 1.6G 932K 1.6G 1% /run none 5.0M 0 5.0M 0% /run/lock none 3.9G 6.4M 3.9G 1% /run/shm none 100M 112K 100M 1% /run/user /dev/sdb3 184G 4.9G 170G 3% /home /dev/sdb4 729G 87G 642G 12% /media/mave/Storage I cut out my windows partitions as I don't see any relevance. I hope this is enough information for someone to tell me what I did wrong

  Read the article

• MySQL Workbench 5.2.39 GA Released

  - by user13164789

  The MySQL Developer Tools team is announcing the next maintenance release of its flagship product, MySQL Workbench, version 5.2.39. This version contains MySQL Utilities 1.0.5, a set of command line Python utilities for helping to perform and script various administration tasks for MySQL. A complete list of changes in this release of the Utilities can be found at:http://dev.mysql.com/doc/workbench/en/wb-utils-news-1-0-5.html MySQL Workbench 5.2 GA • Data Modeling • Query (replaces the old MySQL Query Browser) • Administration (replaces the old MySQL Administrator) Please get your copy from our Download site. Sources and binary packages are available for several platforms, including Windows, Mac OS X and Linux. http://dev.mysql.com/downloads/workbench/ Workbench Documentation can be found here. http://dev.mysql.com/doc/workbench/en/index.html Utilities Documentation can be found here.http://dev.mysql.com/doc/workbench/en/mysql-utilities.html In addition to the new Query/SQL Development and Administration modules, version 5.2 features improved stability and performance – especially in Windows, where OpenGL support has been enhanced and the UI was optimized to offer better responsiveness. This release also includes improvements to the scripting capabilities of the SQL Editor. You can read more about it in http://wb.mysql.com/workbench/doc/ For a detailed list of resolved issues, see the change log. http://dev.mysql.com/doc/workbench/en/wb-change-history.html If you need any additional info or help please get in touch with us. Post in our forums or leave comments on our blog pages. - The MySQL Workbench Team

  Read the article

• Unable to boot 12.04 server: no LVM activated and impossible to mount /

  - by baronKarza

  I'm stuck in the Busy Box shell after upgrading from Ubuntu server 11.10 to Ubuntu server 12.04 64 bit. During the booting phase the system hangs while mounting root filesystem. My system is so configured: /dev/sda1 -- /boot /dev/mapper/vg-lv_root /dev/mapper/vg-lv_var /dev/mapper/vg-lv_tmp When the boot process fails and I'm forwarded to the busybox shell, if I type vgchange -ay I can mount my volumes and all it's OK. But it does not enable LVM automatically so that it is impossible to mount root, var, and tmp. I tried to start with a Knoppix, chroot, reinstall (aptitude) both kernel and lvm2 as suggested by this tread "Fixing unbootable installation on LVM root from Desktop LiveCD": nothing changed. I can't figure out what is the problem. Any suggestion is welcome. Thanks in advance.

  Read the article

< Previous Page | 54 55 56 57 58 59 60 61 62 63 64 65  | Next Page >