Search Results

Search found 7126 results on 286 pages for 'wireless router'.

Page 58/286 | < Previous Page | 54 55 56 57 58 59 60 61 62 63 64 65  | Next Page >

  • Is proprietary vendor software required to use a wireless printer?

    - by sajee
    On Windows Vista, other than the driver, one can use a regular printer w/o any extra software, either plugged in via USB or over the network. I don't have to install extra software from the printer vendor to use the basic printer functionality. Is the same true for wireless printers? I need to install the HP 6000 wireless printer, and I hate installing vendor software other than the required drivers. So I'm wondering whether I need to install HP software on every PC that wants to use this printer? I haven't had a chance to read the manual but I'm hoping I don't have to. Can folks that have experience with wireless printers comment on whether vendor software, other than the printer driver, is required to use a wireless printer?

    Read the article

  • Why would my wireless cut in and out every minute or so?

    - by Strilanc
    I've been having problems with my wireless. I moved to a new apartment, and the wireless seems incredibly unreliable. Sometimes it will be stable for hours until, all of a sudden, it starts cutting in and out. I'll get 30-90 seconds of normal behavior, then 5-30 seconds of nothing, then repeat. Sometimes the connection will stop working entirely, until I power-cycle the router. It is extremely, extremely annoying. Surfing the web isn't too bad, assuming you can stand the random 5-30 second waits. But some connections are sensitive enough to timeout, and it certainly makes multiplayer games unplayable. Facts: I confirmed the problem using ping google.com -t. I get normal traffic, interspersed with bursts of "Request timed out.". I've never had this problem before with this laptop. I didn't bring my own router or modem to the apartment. I'm using what the old tenant had. Hooking directly to the modem via an ethernet cable results in a stable connection. Temporarily cutting power to the router sometimes fixes the problem. Sometimes it doesn't. I reset the router, but the problem remained. Apparently the previous tenant had issues with the internet, but I don't know what they were specifically. The router is a D-Link DIR-615, and their tech support is useless.

    Read the article

  • Can I use an Apple AirPort Express as a wireless-to-wired bridge?

    - by Chris
    I have a wireless network using an Apple AirPort Extreme. That device is set up in my office and hooked up to the cable modem. I have a TV in another room which can accept a wired internet connection (not wireless enabled). Can I use an Apple AirPort Express's ethernet jack to create a wireless-to-wired bridge? If not, what device would I use to do the same thing?

    Read the article

  • wireless usb hub with the hub on the computer side - does this exist?

    - by Mala
    Hi I'm looking for what is effectively a wireless usb hub, but where the "hubbing" part takes place on the computer-side. In other words, something like this: http://www.iogear.com/product/GUWH104KIT/ Except rather than all four "terminating" slots being connected, having 4 small "wireless terminals" so that the devices can be placed all over a room instead of all within reach of the wireless usb hub Does such a product exist? Thanks!

    Read the article

  • How to know my wireless card has injection enabled?

    - by shrimpy
    I am playing around with aircrack. And was trying to see whether my wireless card on my laptop can pass the injection test And I end up seeing the following... does it mean my wireless card is not able to run aircrack? root@myubuntu:/home/myubuntu# iwconfig lo no wireless extensions. eth0 no wireless extensions. eth1 IEEE 802.11bg ESSID:"" Nickname:"" Mode:Managed Frequency:2.437 GHz Access Point: Not-Associated Bit Rate:54 Mb/s Tx-Power:24 dBm Retry min limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=5/5 Signal level=0 dBm Noise level=-57 dBm Rx invalid nwid:0 Rx invalid crypt:781 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 root@myubuntu:/home/myubuntu# aireplay-ng -9 eth1 ioctl(SIOCSIWMODE) failed: Invalid argument ARP linktype is set to 1 (Ethernet) - expected ARPHRD_IEEE80211, ARPHRD_IEEE80211_FULL or ARPHRD_IEEE80211_PRISM instead. Make sure RFMON is enabled: run 'airmon-ng start eth1 <#>' Sysfs injection support was not found either. root@myubuntu:/home/myubuntu#

    Read the article

  • Could 0x800CCC0E in Outlook be caused by bad wireless connection?

    - by AndrejaKo
    I have a computer connected to a WiFi access point/router/modem. Sometimes, I get page not found errors and similar when opening a browser window, sometimes pings fail and it looks like the router's signal isn't very good. On the other hand, I get around 4 bars of signal strength in windows and graph looks good in Inssider. I also never get dropped connection to the router. My main problem is that I often get errors (such as 0x800CCC0E) in Outlook 2010 that after some searching appear to be connected to bad server connection. I'm using GMail over IMAP and all settings are correct. I didn't have similar errors on my previous router, but I'm not 100% sure that they appeared after switching to current one. It may have worked for some time without errors. There are also around 3000 messages on the server and the size of mailbox is around 12 GiB, which may contribute to the problems. On the other hand, there are at least 24 other networks in the 2.4 GHz range which I'm using and the number may have increased since I switched routers. Should I try solving this by getting a router with stronger signal?

    Read the article

  • Why is my wireless so slow compared to my wired download speed?

    - by Shawn
    I just used speedtest.net (using Firefox) to compare my wired connection speed with my wireless connection speed. With my current contract (with Videotron), I'm supposed to get Download speed: 8Mbps Upload speed: 1Mbps Here are the results of the speedtest.net test: Wired Ping: 14ms Download speed: 8.41Mbps Upload speed: 1.04Mbps Wireless Ping: 16ms Download speed: 0.18Mbps Upload speed: 0.98Mbps The difference in download speeds seems staggering to me since I did the test 1 meter aways from my router. Any clue as to why my wireless download speed is so low compared to my wired download speed? using Ubuntu 11.04 on an Acer Aspire 5536-5519 Oh and it might be worth mentioning that my girlfriend has no trouble at all with her wireless connection. No slowness at all. (She uses Firefox on Windows 7 on a Dell) Here's the results for the same test on her system: Ping: 22ms Download speed; 8.44Mbps Upload speed: 1.02Mbps

    Read the article

  • Switch to switch encryption over a wireless bridge (TrustSec?)

    - by metatheorem
    I am planning to connect an existing Cisco 3750 switch to a 3560C switch over a wireless PTP bridge. The bridge will be WPA2 protected, but I am looking for an additional measure of security between the switches to prevent other wireless access through either switch. They do not support IPSec, only 802.1Q tunnels, and buying additional hardware is not likely an option. I am looking into using TrustSec manual mode between the switches. After some effort reading into TrustSec and MACsec, I am mostly certain this is a good choice over the wireless bridge, keeping in mind it is a shared medium. Two questions: Can I reliably prevent other wireless traffic from accessing the switches using TrustSec? Does anyone know of any better options with the 3000 series switches?

    Read the article

  • How can I use my Windows 7 computer to share WiFi connection with PCs that don't have wireless?

    - by Tom Auger
    Long story short: modem and wireless router are downstairs and we're having a LAN party where some visitors don't have wireless. There's no way to run the length of cabling required, so looking for options. My Windows 7 Home Premium PC has a wireless-n connection, and I'd like to see if I can use it as a "hub" or switch of sorts, running an ethernet cable out of the back and into a switch, then splitting off to the other PCs. Is this an option? I know with Internet sharing, you can set up your PC as a wireless access point, but I want to do the opposite.

    Read the article

  • Randomly unusable wireless connection. Oddest issue ever...

    - by Hallucynogenyc
    I have two desktop computers a laptop and a smartphone. All of them connect perfectly to my router (WRT54GL with Tomato firmware), but randomly (once a week maybe) something odd happens: For over an hour or so one of the desktop computers (Windows 7 Pro x64) will just refuse to connect properly to the router. Only that computer and only to that network. I can connect all the other machines to the router perfectly and I can connect properly to other networks with that machine. What I mean by "not being able to connect properly" I mean that the OS will just tell me "not able to connect to.." or that it will connect but then say that it has no Internet access or it connects but will then take minutes to load any website, even the router web interface. I've tried to change from WPA2 to WEP and back to WPA2, I've tried different network adapters (one internal PCI card and one USB external card), removing networks from Windows and adding again... without making any difference. It works for some days but at the end, it ends happening at some time. I just have no clue on what the hell could be going on here. I first thought it was the network adapter, then the router, then Windows... Thanks in advance

    Read the article

  • RealTek RTL8188CE WiFi adapter doesn't connect reliably

    - by ken.ganong
    I recently bought a new system76 laptop which came pre-installed with Ubuntu 11.10. I've been having trouble with my wireless connectivity. It seems that my connection with my wireless network keeps going in and out. It is not my network--I have seen the same problem on multiple WiFi networks and at different distances and reported link qualities. OS version: Ubuntu 11.10 oneiric kernel version: 3.0.0-14-generic lspci: lspci -nnk | grep -iA2 net 04:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter [10ec:8176] (rev 01) Subsystem: Realtek Semiconductor Co., Ltd. Device [10ec:9196] Kernel driver in use: rtl8192ce -- 05:00.0 Ethernet controller [0200]: JMicron Technology Corp. JMC250 PCI Express Gigabit Ethernet Controller [197b:0250] (rev 05) Subsystem: CLEVO/KAPOK Computer Device [1558:2500] Kernel driver in use: jme iwconfig: iwconfig lo no wireless extensions. eth0 no wireless extensions. wlan0 IEEE 802.11bgn ESSID:"peppermintpatty" Mode:Managed Frequency:2.462 GHz Access Point: 98:FC:11:6C:E0:22 Bit Rate=72.2 Mb/s Tx-Power=20 dBm Retry long limit:7 RTS thr=2347 B Fragment thr:off Power Management:off Link Quality=49/70 Signal level=-61 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:1103 Missed beacon:0 lshw: sudo lshw -class network *-network description: Wireless interface product: RTL8188CE 802.11b/g/n WiFi Adapter vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:04:00.0 logical name: wlan0 version: 01 serial: 00:1c:7b:a1:95:04 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=rtl8192ce driverversion=3.0.0-14-generic firmware=N/A ip=192.168.1.106 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn resources: irq:18 ioport:e000(size=256) memory:f7d00000-f7d03fff *-network description: Ethernet interface product: JMC250 PCI Express Gigabit Ethernet Controller vendor: JMicron Technology Corp. physical id: 0 bus info: pci@0000:05:00.0 logical name: eth0 version: 05 serial: 00:90:f5:c0:42:b3 size: 10Mbit/s capacity: 1Gbit/s width: 32 bits clock: 33MHz capabilities: pm pciexpress msix msi bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=jme driverversion=1.0.8 duplex=half latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:56 memory:f7c20000-f7c23fff ioport:d100(size=128) ioport:d000(size=256) memory:f7c10000-f7c1ffff memory:f7c00000-f7c0ffff Any help would be appreciated. The last time I've dealt with wireless issues, the most given solution was NDIS wrapper and I seem sorely out-of-date.

    Read the article

  • How do I toggle the wifi hardware switch for a Dell XPS 17 L702X?

    - by Sparhawk
    Every now and then, I disable my wireless via the menu icon in Ubuntu. Then, when I try to enable the wifi, it tells me that "wireless is disabled" or "wireless is disabled by hardware switch". There is a red icon on the F2 key that looks like a wireless icon, and in Windows, pressing the (red) Fn key and F2 toggles the wifi. This does not work in Ubuntu, leaving me no clear way to turn wifi back on. How can I restart wifi in Ubuntu?

    Read the article

  • How do I install RALink 3290?

    - by user108222
    I have been trying for awhile since I removed Win8 from my laptop to get this Bluetooth/Wireless Card working and I've got it so that it at least recognizes wireless, but every time I try to actually use the wireless, I get kernel panics or everything crashes. Can someone explain to me how to install this driver: http://www.ralinktech.com/en/04_support/support.php?sn=501 So that I can actually use the wireless on my laptop (and perhaps even the bluetooth).

    Read the article

  • Dynamips Virtual Router not pinging external host after bridging

    - by maiky
    I have setup a virtual router image with dynamips and setup bridging between tap0 interface of the virtual router and eth0 and br0 with commands [root@cisco_host]# brctl addbr br0 [root@cisco_host]# ifconfig br0 up [root@cisco_host]# ifconfig eth1 0.0.0.0 [root@cisco_host]# brctl addif br0 eth1 [root@cisco_host]# ifconfig br0 192.168.0.100 netmask 255.255.255.0 up In dynagen configuration I have: f0/0 = NIO_tap:tap0 So, [root@cisco_host]# brctl addif br0 tap0 [root@cisco_host]# ifconfig tap0 up router(config)#int fa0/0 router(config-if)#ip address 192.168.0.101 255.255.255.0 router(config-if)#no shutdown After the configuration above I was expecting that from inside the router I could ping an external machine with IP 192.168.0.1 Actually from the host I can ping the external host 192.168.0.1 as well as 192.168.0.100 and 192.168.0.101. So what am I missing here? tap0 is bridged with br0 and in turn with eth1. So why the router is not pingable from 192.168.0.1 and vice-versa??

    Read the article

  • Why does my Internet slow to a crawl unless I reboot my router every few days?

    - by Lord Torgamus
    A few weeks ago, I noticed that my Internet connection had slowed down to a crawl. I waited a few days hoping it would go away on its own, but it didn't get better. So I asked this question about how to make it faster. The problem went away after I updated to the latest firmware, so I didn't follow up too carefully. But every few days since then, my Internet has slowed down again. Unlike before, all I have to do to fix it is open the router administration page and press the "Reboot" button. Nothing else seems to work, though I'm sure there are options I haven't tried. If it makes a difference, my girlfriend and I both transfer large amounts of data fairly routinely for school (videoconferencing, downloading entire recorded lectures). The router is a Cisco/Linksys 160N V3 that's about a year old. Most of the time, it deals with just two standard Windows 7 laptops. The only thing I came across while searching for answers/dupes was this question, which seems similar superficially, but probably doesn't have the same root issue. Anyways, it's not resolved. What could be causing these slowdowns, and how can I get rid of them?

    Read the article

  • How to run a WebPy server on port 8080 using DDNS of dlink router and to access this site from internet?

    - by nuke1010
    I have two major issue with setting up a web server using my dlink DIR-600L router. Issue 1: I run a WebPy server on port 8080. But the DDNS service providers (like dlinkddns.com or dyndns.org) only allows port 80. I can run the server in port 80 with sudo command. But my server become vulnerable if i give root access. So I tried port forwarding in the router and server. But no use. I don't know if I done that correctly. Issue 2: Even though the server runs on port 80, I can access my site from my local machines only using registered domain names ( say, nikz.dyndns.org). No one on internet cannot load this site even when its totally up. As I observed server log, the request from other clients never reached my server. I need to run this server on port 8080 and i need to access this site from internet. How can I do it? any idea?

    Read the article

  • Arduino wireless options

    - by user541597
    I am currently working on a wireless solution for my arduino and computer. I am trying to connect a Transmitter to my computer and a receiver to my arduino. I have seen a lot of examples with arduino to arduino communication but none for computer to arduino. What would I need to interface the transmitter with my computer, PIC? If anyone can provide any insight or any links it would be greatly appreciated. Thanks,

    Read the article

  • Getting name of active wireless network iOS 3.1/3.2

    - by Typeoneerror
    Looking for a way to get the name of the wireless network the iPhone/Touch is connected to within my application. Is there a simple way to do that? I need to be able to notify users that they need to be on the same network as another Peer via GameKit. So, second question. Any chance I could see a list of available networks and names of peers connected to those?

    Read the article

  • wireless networks c program

    - by Nave
    i wud like to create a wireless network from a laptop. if some laptops come within this range, i wud like to send them a welcome message and when they leave the wifi range, i send them a bye message. is it possible to code such a thing in C? please help me out with this.

    Read the article

  • ZF2: How to get Zend\Navigation inside custom router?

    - by Katan87
    I have custom router and I have to get access to Zend\Navigation inside this custom router. I was googling, asking and searching and no results :/ All I need is to find nodes with 'link' param using Zend\Navigation in my AliasSegment::match function. Here is my module.config.php: 'navigation' => array( // The DefaultNavigationFactory we configured in (1) uses 'default' as the sitemap key 'default' => array( // And finally, here is where we define our page hierarchy 'account' => array( 'label' => 'Account', 'route' => 'node', 'pages' => array( 'home' => array( 'label' => 'Dashboard', 'route' => 'node', 'params' => array( 'id' => '1', 'link' => '/about/gallery' ), ), 'login' => array( 'label' => 'Sign In', 'route' => 'node', 'params' => array( 'id' => '1', 'link' => '/signin' ), ), 'logout' => array( 'label' => 'Sign Out', 'route' => 'node', ), ), ), ), ), [...] 'service_manager' => array( 'factories' => array( 'translator' => 'Zend\I18n\Translator\TranslatorServiceFactory', 'Navigation' => 'Zend\Navigation\Service\DefaultNavigationFactory', ), ), [...] And here is my AliasSegment class: namespace Application\Controller; use Traversable; use Zend\Mvc\Router\Exception; use Zend\Stdlib\ArrayUtils; use Zend\Stdlib\RequestInterface as Request; use Zend\Mvc\Router\Http; class AliasSegment extends \Zend\Mvc\Router\Http\Segment { public function match(Request $request, $pathOffset = null) { //Here i need to have access to Zend\Navigation return parent::match($request, $pathOffset); } }

    Read the article

  • Why wont Ubuntu recognize Rogers LTE Rocket stick 330U Sierra wireless modem?

    - by rob lawson
    I tried to plug the rocket stick into the USB slot, and Ubuntu does not recognize that there is anything in the drive. I plug in a standard USB thumbdrive and it is recognized right away. Are there any applications to help me open the rogers folders to see the files, and maybe connect to the Internet using said rocket stick 330U? I've been searching for this answer for almost a week now, seems no one knows how to get the net using this piece of technology.

    Read the article

  • Why is my wireless significantly slower on Ubuntu 12.04, as compared to windows 7?

    - by user89266
    I'm dual booting 12.04, and Win7. Just a tiny bit of background, I'm starting to get more and more interested in programming and 3d modelling, so I'd like to learn more about ubuntu as a result of those interests. Still a complete newb though! Anyway, When downloading on windows, I get 1.5mb/s easy. Now I swap over to Ubuntu, and it hasn't topped 150 kb/s since I installed it some 6 months ago. I'd downloaded most of my programs on windows, so I never really noticed it, but as I'm committing to ubuntu more, it's starting to hinder me. I'm with Shaw, on their Highspeed 20, which gives me 20 mbps down, and 6mbps up. Speedtest.com shows me varying figures somewhat close to what shaw says they give on both windows and ubuntu, which is to be expected, given that it is shaw afterall... So, I don't know what you guys need to know, and I know even less about how to get it to you. Whatever information you guys need, tell me how to get it, how to get it up here, and i'll get it on here! I thought it might be that I'm using a proprietary driver, when an open sourced one would work better? But I really have no clue. Any help would be very much appreciated. Thanks guys!

    Read the article

  • Wireless will not connect on an Asus U56? [closed]

    - by ernie
    I have an ASUS U56. I could connect to internet without delay or problems in Ubuntu 11.04. Now, running Ubuntu 11.10, I have not been able to connect. I can see the network and the computer tries to connect, but never makes the connection. I have been trying to fix this problem since the release date of 11.10. I had to install the older kernel 2.6 to get the wifi to work. Any other solutions? ernest@ernest-U56E:~$ ifconfig eth0 Link encap:Ethernet HWaddr 14:da:e9:25:6c:d0 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:53 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) wlan0 Link encap:Ethernet HWaddr 40:25:c2:3f:46:d4 inet addr:192.168.xx.xxx Bcast:192.168.10.255 Mask:255.255.255.0 inet6 addr: fe80::4225:c2ff:fe3f:46d4/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:44962 errors:0 dropped:0 overruns:0 frame:0 TX packets:32287 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:35614976 (35.6 MB) TX bytes:5400816 (5.4 MB) ernest@ernest-U56E:~$

    Read the article

< Previous Page | 54 55 56 57 58 59 60 61 62 63 64 65  | Next Page >