Search Results

Search found 19406 results on 777 pages for 'satellite image'.

Page 583/777 | < Previous Page | 579 580 581 582 583 584 585 586 587 588 589 590  | Next Page >

• Big noise from Power Supply Unity Fa? Should I replace it immediately?

  - by EApubs

  Recently, I started to get a large noise from my PC when switched on. After some time, it disappears. I discovered that the issue is with the Power Supply Unit. Does this mean I have a failing PSU? Will it harm the PC if I didn't replace it immediately? Several years ago I bought a new computer casing which is very weird. Its small and compact. Normally, we have the PSU in the top. But in here, the PSU is on the bottom and right below the hard drive. Recently, two of my hard drives started to show problems. Read errors and bad sectors. Can it be the PSU and the design of the casing? Here's an image of the PSU and the hard drive :

  Read the article

• Multiple displays using AMD drivers

  - by Halik

  I am currently running a dual display setup with nVidia 8800GTS video card, on a Ubuntu 12.10 box. The current setup uses nVidia TwinView to render the image on a 1920x1200 display and 1600x1200 one. I'm planning to add a third, 1280x1024 display to the setup. The change will require me to upgrade my GFX card to one supporting triple displays. I'll probably go with Sapphire Radeon 7770 (FLEX edition, to avoid additional active DP-DVI adapters). Before I invest in new GFX I wanted to ask - how well the AMD drivers will support such a setup. It does not matter whether it's fglrx or the OSS ones. If I remember correctly, when running Fedora on a Radeon x800, I had 'void' areas above and below the working area on my second display. The desktop was rendered in 1920+1280 width and 1200 height (which left 176px of vertical space accessible for my cursor and windows but not displayed on the screen - I'd prefer to avoid that). It may have very well been my misconfiguration back then. Generally, are there any solutions from AMD on par with TwinView? Or is it a non-issue at all? Also, I'm wondering about the usual stuff - hardware h264 decoding support, glitch-free flash support, any issues with Compiz/Unity?

  Read the article

• nike ocr twitter api rsvp software not working

  - by daniel

  I recently purchased an OCR program that reads through Nike's Twitter page and takes a circled word out of a picture and sends it back in a Twitter DM. However, it recently stopped working, probably because the person whom I bought it from deleted the server and hasn't responded to my emails. It is a Twitter API app. It still goes through the tweets and I can enter usernames, but it does not read the image anymore nor send a DM. If anyone knows how I can go about fixing this, it would be a huge help. Here is the program website: http://rsvpocr.nanoworking.com

  Read the article

• How to upgrade OS on Mac Mini with external USB Drive?

  - by David

  We have a G4 Mac Mini, circa 2005, running Mac OS X 10.4 Tiger, and we want to upgrade to 10.5 Leopard. We have a Leopard install disk, but the optical drive in this mini is broken. So we transferred the install disk image to a USB HDD, but now we can't figure out how to boot off it. From what I've read in Mac forums, some PPC Macs, including some G4's, have been able to boot from USB, even though it sounds like this wasn't officially supported, and it may well depend on the specific model of USB drive and Mac. My Mac says CPU is "PowerPC G4 (1.2)" and Boot ROM is "4.8.9f4". I was hoping I might just find somebody here who had that same Mac Mini and find out if they could make it work. I'd especially like to know any specifics about the USB drive they found success with. Any insights at all would be appreciated. Thanks.

  Read the article

• Oracle Worldwide Product Translation Group and Applications User Experience Working Together

  - by ultan o'broin

  The Applications User Experience (UX) Mobile team has been extending its ethnographic research to even more countries. Recently, the team conducted research in Sweden, and I am pleased to say I made the connection for the UX team with the Oracle's Worldwide Translation Product Group (WPTG) local (that is, in-country) language specialists. It struck me that WPTG's local market knowledge and insight that we heard about at an Oracle Usability Advisory Board meeting in the UK in 2011 would be very valuable to the UX efforts while, at the same time, UX could afford WPTG an opportunity to understand our design and development direction so that linguistic resources (terminology, style guides, translatability guidelines, and so on) for any translation of our mobile solutions could be prepared in advance. Brent White of the Mobile UX team takes notes as ethnography participant Capri Norman uses mobile technology to work in Stockholm. Pic credit: Oracle Applications UX. The UX team acknowledges Capri's kind permission to use this image. I'm told by Brent White of the Mobile UX team that the co-operation was a big success.  A WPTG Swedish language specialist joined a couple of ethnographic sessions, taking great notes and turning them around very fast for the UX team. And of course, a great local insight into Swedish culture and ways of working was provided too, along with some nice socializing!  More research in more countries is planned. Watch out for future blog posts and other communications about this great co-operation worldwide.

  Read the article

• How to shift a vector based on the rotation of another vector?

  - by bpierre

  I’m learning 2D programming, so excuse my approximations, and please, don’t hesitate to correct me. I am just trying to fire a bullet from a player. I’m using HTML canvas (top left origin). Here is a representation of my problem: The black vector represent the position of the player (the grey square). The green vector represent its direction. The red disc represents the target. The red vector represents the direction of a bullet, which will move in the direction of the target (red and dotted line). The blue cross represents the point from where I really want to fire the bullet (and the blue and dotted line represents its movement). This is how I draw the player (this is the player object. Position, direction and dimensions are 2D vectors): ctx.save(); ctx.translate(this.position.x, this.position.y); ctx.rotate(this.direction.getAngle()); ctx.drawImage(this.image, Math.round(-this.dimensions.x/2), Math.round(-this.dimensions.y/2), this.dimensions.x, this.dimensions.y); ctx.restore(); This is how I instanciate a new bullet: var bulletPosition = playerPosition.clone(); // Copy of the player position var bulletDirection = Vector2D.substract(targetPosition, playerPosition).normalize(); // Difference between the player and the target, normalized new Bullet(bulletPosition, bulletDirection); This is how I move the bullet (this is the bullet object): var speed = 5; this.position.add(Vector2D.multiply(this.direction, speed)); And this is how I draw the bullet (this is the bullet object): ctx.save(); ctx.translate(this.position.x, this.position.y); ctx.rotate(this.direction.getAngle()); ctx.fillRect(0, 0, 3, 3); ctx.restore(); How can I change the direction and position vectors of the bullet to ensure it is on the blue dotted line? I think I should represent the shift with a vector, but I can’t see how to use it.

  Read the article

• How to Manage and Use LVM (Logical Volume Management) in Ubuntu

  - by Justin Garrison

  In our previous article we told you what LVM is and what you may want to use it for, and today we are going to walk you through some of the key management tools of LVM so you will be confident when setting up or expanding your installation. As stated before, LVM is a abstraction layer between your operating system and physical hard drives. What that means is your physical hard drives and partitions are no longer tied to the hard drives and partitions they reside on. Rather, the hard drives and partitions that your operating system sees can be any number of separate hard drives pooled together or in a software RAID Latest Features How-To Geek ETC Inspire Geek Love with These Hilarious Geek Valentines How to Integrate Dropbox with Pages, Keynote, and Numbers on iPad RGB? CMYK? Alpha? What Are Image Channels and What Do They Mean? How to Recover that Photo, Picture or File You Deleted Accidentally How To Colorize Black and White Vintage Photographs in Photoshop How To Get SSH Command-Line Access to Windows 7 Using Cygwin How to Kid Proof Your Computer’s Power and Reset Buttons Microsoft’s Windows Media Player Extension Adds H.264 Support Back to Google Chrome Android Notifier Pushes Android Notices to Your Desktop Dead Space 2 Theme for Chrome and Iron Carl Sagan and Halo Reach Mashup – We Humans are Capable of Greatness [Video] Battle the Necromorphs Once Again on Your Desktop with the Dead Space 2 Theme for Windows 7

  Read the article

• Excel CSV import treating quoted strings of numbers as numeric values, not strings

  - by MichaelOryl

  I've got a web application that is exporting its data to a CSV file. Here's one example row of the CSV file in question: 28,"65154",02/21/2013 00:00,"false","0316295","8316012,8315844","MALE" Since I can't post an image, I'll have to explain the results in Excel. The "0316295" field gets turned into a number and the leading 0 goes away. The "8316012,8315844" gets interpreted as one single number: 83,160,128,315,844. That is, most obviously, not the intended result. I've seen people recommend a leading single quote for such cases, but that doesn't really work either. 28,"65154",02/21/2013 00:00,"false","'0316295","'8316012,8315844","MALE" The single quote is visible at all times in the cell in Excel, though if I enter a number with a leading single quote myself, it shows just the intended string and not the single quote with the string. Importing is not the same as typing, it seems. Anybody have a solution here?

  Read the article

• Google+ Platform Office Hours for May 16th, 2012: Hangouts API v1.1

  Google+ Platform Office Hours for May 16th, 2012: Hangouts API v1.1 This week we discussed the latest release of the Hangouts API, v1.1. JD Salazar and Richard Dunn from the Hangouts API engineering team joined us to help your answer questions. Discussion this session on Google+: goo.gl You can learn more about our office hours here: goo.gl 0:29 - Introductions 2:50 - Richard gives us an overview of what's new in Hangouts API v1.1 8:57 - What are the default scales for the static overlays? 9:25 - Will the static overlay scale ratio change during the hangout? 10:13 - What is the resolution of the feed? How do I ensure my overlays match the quality? 12:49 - How do I know if an image resource has failed to load? 16:33 - Can we have animated gifs as overlays? 19:44 - Loaded overlays do not clear upon deletion. How many can I load before I encounter issues? 21:48 - Are sound overlays played to all participants or only locally? What about sound cancellation? 23:27 - How do you uninstall a Hangout app? 25:41 - Can I make an app that uses drag and drop onto the film strip? 26:55 - Can we embed participant thumbnails elsewhere on the screen? 28:33 - How can I determine a consistent ordering for hangout participants? 31:35 - Can I access Picasa photos uploaded by another user within a hangout? Gerwin demonstrates his solution. 31:14 - How do I know when my hangout app has been unloaded for the purposes of doing cleanup? 39:28 - Will face tracking ever support multiple faces? 40:41 - Can I use WebGL in a hangouts app? 42:09 - I'm having issues with <b>...</b> From: GoogleDevelopers Views: 2032 18 ratings Time: 53:05 More in Science & Technology

  Read the article

• iSCSI SAN RAID 10 Performance -- Poor Read, Good Write

  - by Litzner

  I have a EqualLogic PS4000 SAN unit with the latest firmware, setup in RAID 10. I have 3 2TB Volumes on the SAN shared out via iSCSI on 2 eth ports on two different subnets. I have moved a test server over to this newly setup SAN, and my testing is showing me a problem. I am getting dismal read performance in everything except a test with 32 queue depth (see attach image) Write performance seems to be right about where it should be. I have tried MPIO on and off, on was slightly better but not much.

  Read the article

• script Disk Management configuration

  - by Joseph

  I have 10 workstations with large monitors that have USB slots and several card readers built in. The card readers cannot be disabled and will map to drive letters when I image the computers. I go into Disk Management and delete the drive mappings and add mappings to a single folder in C:\ with a folder for each slot. I have to do this because of scripts that run that are expecting specific letter drive mappings to network resources. Is there a way to script the deleting and adding of drive mappings instead of having to use the Disk Management GUI manually on each workstation? The workstations are running XP Professional.

  Read the article

• Request Coalescing in Nginx

  - by Marcel Jackwerth

  I have an image resize server sitting behind an nginx server. On a cold cache two clients requesting the same file could trigger two resize jobs. client-01.net GET /resize.do/avatar-1234567890/300x200.png client-02.net GET /resize.do/avatar-1234567890/300x200.png It would be great if only one of the requests could go through to the backend in this situation (while the other client is set 'on-hold'). In Varnish there seems to be such a feature, called Request Coalescing. However that seems to be a Varnish-specific term. Is there something similar for Nginx?

  Read the article

• Add colors to gif palete gimp

  - by Tomáš Zato

  When I open a GIF file in gimp, I find it very hard to add more colours then those that are already contained in GIF palette. When I draw with different colours, GIMP is trying to use the colour from palette most approximate to the colour I'm drawing. (may result in red instead of black) This problem persist even if I save the imported GIF as XCF file (even if I create new layers in it). How do I make gimp ignore the palette? The only solution was saving (exporting) the file as some non-palete image as BMP and then importing it again. Example : After flood fill (black)

  Read the article

• Internet Explorer menu z-order problem [migrated]

  - by robgt

  I have what appears to be a z-order problem with Internet Explorer 9. It might be in other IE versions also, but not tested. I have to assume so. This page: http://www.modelhelicopters.co.uk/partsfinder/trex500esp/frames If you hover over the "All pages for this model" menu item on the parts finder menu bar (below the currency selector) - it should drop down a list of all the parts finder pages for the selected model helicopter. If you view the same page in IE or Chrome etc, you will see how it should appear. In IE9, the menu gets cut off at the top of the main exploded view image - suggesting the z-order is wrong. I have tried amending this with a jquery snippet but it didn't fix IE9. I know the code was inserted by jquery as shown by firebug in firefox. $j('div.std img[src*="/partsfinder/img"]').attr("style","position:relative;z-index:-100;"); I really do not know why this is not working.

  Read the article

• What You Said: How You Share Your Photos

  - by Jason Fitzpatrick

  Earlier this week we asked you to share your favorite tips, tricks, and tools for sharing photos with friends and family. Now we’re back to highlight the ways HTG readers share their pics. Image available as wallpaper here. By far the most popular method of photo sharing was to upload the pictures to cloud-based storage. Many readers took advantage of sizable SkyDrive accounts. Dragonbite writes: I used to use PicasaWeb (uploaded from Shotwell) until I got the SkyDrive w/25 GB available. My imported pictures are automatically synchronized with SkyDrive and I then send out a link to whomever I want. I have another (desktop) computer where all of the pictures are stored from mine and my wife’s camera’s imports so if I need to free up some space on SkyDrive or my Windows 7 laptop, I double-check they are in the desktop computer before deleting them from my laptop (and thus from SkyDrive as well). I wish SkyDrive enabled some features like rotate, or searching by Tagged person. 8 Deadly Commands You Should Never Run on Linux 14 Special Google Searches That Show Instant Answers How To Create a Customized Windows 7 Installation Disc With Integrated Updates

  Read the article

• Desktop Fun: Mountains Theme Wallpapers

  - by Asian Angel

  Do you love to go on hikes in the mountains and enjoy the scenery? Bring those sweeping views and a touch of the great outdoors to your desktop with our Mountains Theme Wallpaper collection. Note: Click on the picture to see the full-size image—these wallpapers vary in size so you may need to crop, stretch, or place them on a colored background in order to best match them to your screen’s resolution.         For more fun wallpapers be certain to visit our new Desktop Fun section. Similar Articles Productive Geek Tips Windows 7 Welcome Screen Taking Forever? Here’s the Fix (Maybe)Desktop Fun: Starship Theme WallpapersDesktop Fun: Underwater Theme WallpapersDesktop Fun: Forest Theme WallpapersDesktop Fun: Fantasy Theme Wallpapers TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Monitor Applications With Kiwi LocPDF is a Visual PDF Search Tool Download Free iPad Wallpapers at iPad Decor Get Your Delicious Bookmarks In Firefox’s Awesome Bar Manage Photos Across Different Social Sites With Dropico Test Drive Windows 7 Online

  Read the article

• How useful is PXE booting?

  - by J. T.

  Hi All, How fast is booting over PXE?. Is it conceivable to boot a linux installation? Does it take a long time? I have never really looked into it at all, but I was considering setting up a compiler farm and thought this might be interesting to try. Does one have a main computer that the PXE answers to to get its image? Can you have multiple PXE images to pick from? Thanks!

  Read the article

• Wrong screen resolution with HDMI output to HDTV

  - by bruno077

  I own an HDTV with a native resolution of 1360x768. Sometimes I plug in my laptop to watch movies, and I used to do it with a VGA cable. I've had no problem setting the laptop to the TV native resolution with the VGA cable (1360x768). Having acquired an HDMI cable recently, I can't go past 1280x720, and if I do, the TV displays "invalid format". At 1280x720, the image is viewable but not centered, so for example I can't see the windows taskbar or titlebars. I've tried both cables (VGA and HDMI) with the same settings: Laptop's display turned off and trying to set the Tv's native resolution. What could I try to fix this issue? Could it be a faulty cable? (I'm using a Thinkpad with Windows 7) EDIT: My graphics adapter appears listed as Mobile Intel(R) 4 Series Express Chipset Family (Searching for my laptop's model yields Intel GMA 4500MHD as the graphic card) I'm downloading a driver update from Intel's website. I'll report my progress when I check its behavior tomorrow.

  Read the article

• Installing linux mint in one partition

  - by sha404

  So, I have a disk with a MBR setup(image below). I've managed to have 50 GB unallocated space for intalling Linux Mint 14. And I want to keep the current windows OS too(but don't want the Mint inside windows). Now I've seen in some tutorials that Linux Mint needs several partitions for bootloader, swap, & home. I don't like to have so many partitions & maybe MBR stuff won't let me create more than one now. So, is it possible to install Linux Mint in one partition only? If it is really impossible than what's the minimum number? & how can I accomplish that? Thanks in advance.

  Read the article

• Port forwarding not working?

  - by rphello101

  I'm trying to set up an Apache Server to be accessed publicly. I'm using a Netgear R4500 router hooked up to a Motorola SB6121 modem. I can access my server on my computer by typing in my IP address. After following the instructions to forward port 80 so I can access the server from other computers, it does not work (see image). I get "This webpage is not available". I am forwarding to the IP address of my computer. Using this Network Port Scanner Tool, it says "80/tcp filtered http", which, as I understand it, means forwarding did not work correctly. In my Apache httpd file, I have: ServerName 192.168.1.13:80 and Listen 192.168.1.13:80 Anyone know what's wrong or have something I can try? click to enlarge

  Read the article

• Why is idle windows VM using so much CPU?

  - by Jeff Shattock

  I have 2 VMs running as guests on a KVM virtualization platform running on Ubuntu 10.04. One VM is an Ubuntu 10.04 system, the other is a Windows 7 system. When both machines are completely logged out, the Linux machine uses 1% CPU, the Windows one 45-50%, according to top. The graphs in virt-manager seem to back this up. Theres nothing installed on the Win7 image that would be running in the background; its as fresh as can be. Why is the Windows VM using so much more than the Linux VM, when both are logged out and idling?

  Read the article

• Ubuntu 10.04 User Interface errors

  - by user306668

  Hi Guys Using Ubuntu 10.04 Beta on a Sony Vaio laptop (slightly old PCG-4n7M). It was working wonderfully until this morning. After updating and upgrading the login screen images gave broken image icons, then on logging in UI was replaced with just the cmd shell. All menus are gone. I have tried to reconfigure xserver-xorg and that doesn't work. Reinstalling doesn't either. I have tried a number of other attempts. What is weird is that I can launch graphical applications from the cmd line. such as firefox or google-chrome. and they work but the UI is simplified or broken (no resizing, closing, minimizing). I am a bit lost on how to fix this error. If anyone has any suggestions, please let me know

  Read the article

• SQL Server Configuration Manager menu won't show up

  - by Aurelien Gasser

  I'm running a Windows 8 VM on a MacBook using Parallels Desktop 9. On this Windows VM, I have a SQL Server instance running perfectly. However, when I launch SQL Server Configuration Manager, and I want to enable an IP configuration, the Enable menu options are invisible : Here is a screenshot : http://i.imgur.com/PY7qGup.png (I don't have enough reputation to display the image inline) When I click the arrow, a contextual menu should appear with 2 choices "Yes" or "No". Instead, a tiny contextual menu appears, but it's empty. I tried using my keyboard tab/space/arrows keys without success. Has anyone faced/solved the same problem ?

  Read the article

• Address VMWare Fusion Linux guest by hostname?

  - by amrox

  I have a Ubuntu Server 9.04 image set up in VMWare Fusion 3.0.0, using the NAT option for the guest's network connection. From the Mac host, I can ssh to the linux guest just fine using it's IP address, but I would like to be able to refer to it by hostname for connivence. ie: mac-host:~ ssh [email protected] I had a similar setup using Parallels a couple years ago, but I don't remember how it was set up. It may have "just worked". Any suggestion on how to make this work?

  Read the article

• Which software to use for RAMDISK on Windows 2008?

  - by Tony_Henrich

  I am building a server machine with lots of RAM. At least 16G. I am planning to put my frequently read and written data in RAM so I am looking for software for creating RAM disks. This is for Windows Server 2008 R2 Standard 64bit. Any recommendations? I would like one where I can flush the disk image into persistent storage upon demand. For example when Windows shuts down. (I am aware of all the consequences of data loss when power is lost)

  Read the article

< Previous Page | 579 580 581 582 583 584 585 586 587 588 589 590  | Next Page >