Search Results

Search found 16560 results on 663 pages for 'far'.

Page 586/663 | < Previous Page | 582 583 584 585 586 587 588 589 590 591 592 593  | Next Page >

• What to do after a servicing fails on TFS 2010

  - by Martin Hinshelwood

  What do you do if you run a couple of hotfixes against your TFS 2010 server and you start to see seem odd behaviour? A customer of mine encountered that very problem, but they could not just, or at least not easily, go back a version.   You see, around the time of the TFS 2010 launch this company decided to upgrade their entire 250+ development team from TFS 2008 to TFS 2010. They encountered a few problems, owing mainly to the size of their TFS deployment, and the way they were using TFS. They were not doing anything wrong, but when you have the largest deployment of TFS outside of Microsoft you tend to run into problems that most people will never encounter. We are talking half a terabyte of source control in TFS with over 80 proxy servers. Its certainly the largest deployment I have ever heard of. When they did their upgrade way back in April, they found two major flaws in the product that meant that they had to back out of the upgrade and wait for a couple of hotfixes. KB983504 – Hotfix KB983578 – Patch KB2401992 -Hotfix In the time since they got the hotfixes they have run 6 successful trial migrations, but we are not talking minutes or hours here. When you have 400+ GB of data it takes time to copy it around. It takes time to do the upgrade and it takes time to do a backup. Well, last week it was crunch time with their developers off for Christmas they had a window of opportunity to complete the upgrade. Now these guys are good, but they wanted Northwest Cadence to be available “just in case”. They did not expect any problems as they already had 6 successful trial upgrades. The problems surfaced around 20 hours in after the first set of hotfixes had been applied. The new Team Project Collection, the only thing of importance, had disappeared from the Team Foundation Server Administration console. The collection would not reattach either. It would not even list the new collection as attachable! Figure: We know there is a database there, but it does not This was a dire situation as 20+ hours to repeat would leave the customer over time with 250+ developers sitting around doing nothing. We tried everything, and then we stumbled upon the command of last resort. TFSConfig Recover /ConfigurationDB:SQLServer\InstanceName;TFS_ConfigurationDBName /CollectionDB:SQLServer\instanceName;"Collection Name" -http://msdn.microsoft.com/en-us/library/ff407077.aspx WARNING: Never run this command! Now this command does something a little nasty. It assumes that there really should not be anything wrong and sets about fixing it. It ignores any servicing levels in the Team Project Collection database and forcibly applies the latest version of the schema. I am sure you can imagine the types of problems this may cause when the schema is updated leaving the data behind. That said, as far as we could see this collection looked good, and we were even able to find and attach the team project collection to the Configuration database. Figure: After attaching the TPC it enters a servicing mode After reattaching the team project collection we found the message “Re-Attaching”. Well, fair enough that sounds like something that may need to happen, and after checking that there was disk IO we left it to it. 14+ hours later, it was still not done so the customer raised a priority support call with MSFT and an engineer helped them out. Figure: Everything looks good, it is just offline. Tip: Did you know that these logs are not represented in the ~/Logs/* folder until they are opened once? The engineer dug around a bit and listened to our situation. He knew that we had run the dreaded “tfsconfig restore”, but was not phased. Figure: This message looks suspiciously like the wrong servicing version As it turns out, the servicing version was slightly out of sync with the schema. KB Schema Successful           KB983504 341 Yes   KB983578 344 sort of   KB2401992 360 nope   Figure: KB, Schema table with notation to its success The Schema version above represents the final end of run version for that hotfix or patch. The only way forward The problem was that the version was somewhere between 341 and 344. This is not a nice place to be in and the engineer give us the  only way forward as the removal of the servicing number from the database so that the re-attach process would apply the latest schema. if his sounds a little like the “tfsconfig recover” command then you are exactly right. Figure: Sneakily changing that 3 to a 1 should do the trick Figure: Changing the status and dropping the version should do it Now that we have done that we should be able to safely reattach and enable the Team Project Collection. Figure: The TPC is now all attached and running You may think that this is the end of the story, but it is not. After a while of mulling and seeking expert advice we came to the opinion that the database was, for want of a better term, “hosed”. There could well be orphaned data in there and the likelihood that we would have problems later down the line is pretty high. We contacted the customer back and made them aware that in all likelihood the repaired database was more like a “cut and shut” than anything else, and at the first sign of trouble later down the line was likely to split in two. So with 40+ hours invested in getting this new database ready the customer threw it away and started again. What would you do? Would you take the “cut and shut” to production and hope for the best?

  Read the article

• Microsoft Forcing Dev/Partners Hands on Win 8 Through Certification

  - by D'Arcy Lussier

  I remember 2.5 years ago when Microsoft dropped a bomb on the Microsoft Partner community: all Gold competencies would require .NET 4 based premiere certifications (MCPD). Problem was, this gave a window of about 6 months for partners to update their employees’ certifications. At the place I was working, I put together an aggressive plan and we were able to attain the certs needed. Microsoft is always open that the certification requirements will change as the industry changes. .NET 1.0 certifications are useless here in 2012, and rightfully so they’ve been retired for a long time now. But now we’re seeing a new tactic by Microsoft – shifting gears away from certifications that speak to what industry needs and more to the Windows 8 agenda. Consider that currently the premiere development certification is the Microsoft Certified Professional Developer, which comes in three flavours – Web, Windows, and Azure. All require WCF and Data Access exams, as well as one that deals with the associated base technologies (ASP.NET, WinForms/WPF, Azure), and one that ties all three together in a solution-based exam. For Microsoft-based organizations, these skills aren’t just valid but necessary in building Microsoft applications. But the MCPD is being replaced with our old friend Microsoft Certified Solutions Developer (MCSD). So far, Microsoft has only released two types of MCSD – Web and Windows Store Apps. Windows Store Apps?! In a push to move developers to create WinRT-based applications, desktop development is now considered a second-class citizen in the eyes of Redmond. Also interesting are the language options for the exams: HTML5 and C#. Sorry VB folks, its time to embrace curly braces whether they be JavaScript or C#. Consider too the skills being assessed for the Windows Store Apps: Get your MCSD: Windows Store Apps Using HTML5 Get your MCSD: Windows Store Apps Using C# *Image Source: http://www.microsoft.com/learning/en/us/certification/mcsd-windows-store-apps.aspx Nov 21/2012 If you look at the skills being tested in each exam, you’ll find that skills like WCF and Data Access are downplayed compared to things like integrating Charms, facilitating Search, programming for the microphone and camera – all very Windows 8 focussed items. Where this becomes maddening is that Microsoft is still pushing Windows 7 with enterprise clients. According to a ZDNet article, Microsoft wants to see Windows 7 on 70% of enterprise desktops by mid 2013. Assuming they somehow meet that (its a pretty lofty goal), there’s years of traditional desktop-based development that will still be required at some level. For those thinking they’ll just write and stick with the MCPD certification, note that most exams that go towards that certification will be retired at the end of July 2013! (Read the small print). And while details haven’t been finalized, its a safe bet that MCPD certifications eventually won’t count towards Gold-level competencies in the Microsoft Partner program. What this means for Microsoft Partners and Developers is that certification for desktop development is going to be limited to Windows Store Apps unless Microsoft re-introduces a traditional desktop (WPF) based MCSD cert. Web Application Development – It’s Not All Bad There’s big changes on the web side of certification, but I actually see these changes as being for the good! Check out the new exam requirements for MCSD – Web Applications: Get your MCSD: Web Applications certification *Image Source: http://www.microsoft.com/learning/en/us/certification/cert-mcsd-web-applications.aspx Nov 21, 2012 We now *start* with HTML5, JavaScript, and CSS3! Now I’m sure that these will be slanted towards web development in IE, and I can hear designers everywhere bemoaning the CSS/IE combination. Still, I applaud Microsoft for adopting HTML5 as the go-to web technology and requiring certified developers to prove they have skills in the basics of web dev. The fact that the second exam clearly states “MVC Web Applications” shows that Web Forms is truly legacy and deprecated. That’s not to say there aren’t those out there that are still supporting or (for whatever reason) doing new dev with Web Forms, but this move by Microsoft is telling the community they better get on the MVC bandwagon if they want to stay current. Fantastic! And of course Azure needs to be here as well, and this is where the Microsoft agenda fits in. It’s no secret that there’s been a huge push in getting developers on to Azure. I don’t see this as being a bad thing either, as cloud computing (whether Azure, private, or 3rd party) is a necessary skill for developers to have here in 2012. The cynic in me realizes that the HTML5/JavaScript/CSS push wouldn’t be as prominent though if not for the Windows 8 Store App play, where HTML5 is a first class citizen (and an available language for the MCSD Windows Store App cert). In this case, the desktop developers loss is the web developers gain. Get Ready for Changes In addition to the changes in certifications, the Microsoft Partner competencies are going through changes as well. Web and Software Development are being merged into a single competency, meaning that licenses you would have received from having both as Gold are reduced. Other competencies are either being removed or changed, as are the exam requirements. In the same way that we’re seeing faster release cycles from Microsoft, so too will we see the Microsoft Partner Program and MS Certifications evolve faster than ever before. Many of us got caught in the last wave of changes, but this time we can see the wave coming – and it looks pretty big!

  Read the article

• Loading XML file containing leading zeros with SSIS preserving the zeros

  - by Compudicted

  Visiting the MSDN SQL Server Integration Services Forum oftentimes I could see that people would pop up asking this question: “why I am not able to load an element from an XML file that contains zeros so the leading/trailing zeros would remain intact?”. I started to suspect that such a trivial and often-required operation perhaps is being misunderstood by the developer community. I would also like to add that the whole state of affairs surrounding the XML today is probably also going to be increasingly affected by a motion of people who dislike XML in general and many aspects of it as XSD and XSLT invoke a negative reaction at best. Nevertheless, XML is in wide use today and its importance as a bridge between diverse systems is ever increasing. Therefore, I deiced to write up an example of loading an arbitrary XML file that contains leading zeros in one of its elements using SSIS so the leading zeros would be preserved keeping in mind the goal on simplicity into a table in SQL Server database. To start off bring up your BIDS (running as admin) and add a new Data Flow Task (DFT). This DFT will serve as container to adding our XML processing elements (besides, the XML Source is not available anywhere else other than from within the DFT). Double-click your DFT and drag and drop the XMS Source component from the Tool Box’s Data Flow Sources. Now, let the fun begin! Being inspired by the upcoming Christmas I created a simple XML file with one set of data that contains an imaginary SSN number of Rudolph containing several leading zeros like 0000003. This file can be viewed here. To configure the XML Source of course it is quite intuitive to point it to our XML file, next what the XML source needs is either an embedded schema (XSD) or it can generate one for us. In lack of the one I opted to auto-generate it for me and I ended up with an XSD that looked like: <?xml version="1.0"?> <xs:schema attributeFormDefault="unqualified" elementFormDefault="qualified" xmlns:xs="http://www.w3.org/2001/XMLSchema"> <xs:element name="XMasEvent"> <xs:complexType> <xs:sequence> <xs:element minOccurs="0" name="CaseInfo"> <xs:complexType> <xs:sequence> <xs:element minOccurs="0" name="ID" type="xs:unsignedByte" /> <xs:element minOccurs="0" name="CreatedDate" type="xs:unsignedInt" /> <xs:element minOccurs="0" name="LastName" type="xs:string" /> <xs:element minOccurs="0" name="FirstName" type="xs:string" /> <xs:element minOccurs="0" name="SSN" type="xs:unsignedByte" /> <!-- Becomes string -- > <xs:element minOccurs="0" name="DOB" type="xs:unsignedInt" /> <xs:element minOccurs="0" name="Event" type="xs:string" /> <xs:element minOccurs="0" name="ClosedDate" /> </xs:sequence> </xs:complexType> </xs:element> </xs:sequence> </xs:complexType> </xs:element> </xs:schema> As an aside on the XML file: if your XML file does not contain the outer node (<XMasEvent>) then you may end up in a situation where you see just one field in the output. Now please note that the SSN element’s data type was chosen to be of unsignedByte (and this is for a reason). The reason is stemming from the fact all our figures in the element are digits, this is good, but this is not exactly what we need, because if we will attempt to load the data with this XSD then we are going to either get errors on the destination or most typically lose the leading zeros. So the next intuitive choice is to change the data type to string. Besides, if a SSIS package was already created based on this XSD and the data type change was done thereafter, one should re-set the metadata by right-clicking the XML Source and choosing “Advanced Editor” in which there is a refresh button at the bottom left which will do the trick. So far so good, we are ready to load our XML file, well actually yes, and no, in my experience typically some data conversion may be required. So depending on your data destination you may need to tweak the data types targeted. Let’s add a Data Conversion Task to our DFT. Your package should look like: To make the story short I only will cover the SSN field, so in my data source the target SQL Table has it as nchar(10) and we chose string in our XSD (yes, this is a big difference), under such circumstances the SSIS will complain. So will go and manipulate on the data type of SSN by making it Unicode String (DT_WSTR), World String per se. The conversion should look like: The peek at the Metadata: We are almost there, now all we need is to configure the destination. For simplicity I chose SQL Server Destination. The mapping is a breeze, F5 and I am able to insert my data into SQL Server now! Checking the zeros – they are all intact!

  Read the article

• Silverlight Reporting Application Part 3.5 - Prism Background and WCF RIA [Series Intermission]

  Taking a step back before I dive into the details and full-on coding fun, I wanted to once again respond to a comment on my last post to clear up some things in regards to how I'm setting up my project and some of the choices I've made. Aka, thanks Ben. :) Prism Project Setup For starters, I'm not the ideal use case for a Prism application. In most cases where you've got a one-man team, Prism can be overkill as it is more intended for large teams who are geographically dispersed or in applications that have a larger scale than my Recruiting application in which you'll greatly benefit from modularity, delayed loading of xaps, etc. What Prism offers, though, is a manner for handling UI, commands, and events with the idea that, through a modular approach in which no parts really need to know about one another, I can update this application bit by bit as hiring needs change or requirements differ between offices without having to worry that changing something in the Jobs module will break something in, say, the Scheduling module. All that being said, here's a look at how our project breakdown for Recruit (MVVM/Prism implementation) looks: This could be a little misleading though, as each of those modules is actually another project in the overall Recruit solution. As far as what the projects actually are, that looks a bit like this: Recruiting Solution Recruit (Shell up there) - Main Silverlight Application .Web - Default .Web application to host the Silverlight app Infrastructure - Silverlight Class Library Project Modules - Silverlight Class Library Projects Infrastructure &Modules The Infrastructure project is probably something you'll see to some degree in any composite application. In this application, it is going to contain custom commands (you'll see the joy of these in a post or two down the road), events, helper classes, and any custom classes I need to share between different modules. Think of this as a handy little crossroad between any parts of your application. Modules on the other hand are the bread and butter of this application. Besides the shell, which holds the UI skeleton, and the infrastructure, which holds all those shared goodies, the modules are self-contained bundles of functionality to handle different concerns. In my scenario, I need a way to look up and edit Jobs, Applicants, and Schedule interviews, a Notification module to handle telling the user when different things are happening (i.e., loading from database), and a Menu to control interaction and moving between different views. All modules are going to follow the following pattern: The module class will inherit from IModule and handle initialization and loading the correct view into the correct region, whereas the Views and ViewModels folders will contain paired Silverlight user controls and ViewModel class backings. WCF RIA Services Since we've got all the projects in a single solution, we did not have to go the route of creating a WCR RIA Services Class Library. Every module has it's WCF RIA link back to the main .Web project, so the single Linq-2-SQL (yes, I said Linq-2-SQL, but I'll soon be switching to OpenAccess due to the new visual designer) context I'm using there works nicely with the scope of my project. If I were going for completely separating this project out and doing different, dynamically loaded elements, I'd probably go for the separate class library. Hope that clears that up. In the future though, I will be using that in a project that I've got in the "when I've got enough time to work on this" pipeline, so we'll get into that eventually- and hopefully when WCF RIA is in full release! Why Not use Silverlight Navigation/Business Template? The short answer- I'm a creature of habit, and having used Silverlight for a few years now, I'm used to doing lots of things manually. :) Plus, starting with a blank slate of a project I'm able to set up things exactly as I want them to be. In this case, rather than the navigation frame we would see in one of the templates, the MainRegion/ContentControl is working as our main navigation window. In many cases I will use theSilverlight navigation template to start things off, however in this case I did not need those features so I opted out of using that. Next time when I actually hit post #4, we're going to get into the modules and starting to get functionality into this application. Next week is also release week for the Q1 2010 release, so be sure to check out our annualWebinar Week (I might be biased, but Wednesday is my favorite out of the group). Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• Dealing with "I-am-cool-and-you-are-dumb" manager [closed]

  - by Software Guy

  I have been working with a software company for about 6 months now. I like the projects I work on there and I really like all the people there except for 1 guy. That guy is technically smart, and he is a co-founder of the company. He is an okay guy in person (the kind you wouldn't want to care about much) but things get tricky when he is your manager. In general I am all okay but there are times when I feel I am not being treated fairly: He doesn't give much thought to when he makes mistakes and when I do something similar, he is super critical. Recently he went as far as to say "I am not sure if I can trust you with this feature". The detais of this specific case are this: I was working on this feature, and I was already a couple of hours over my normal working hours, and then I decided to stop and continue tomorrow. We use git, and I like to commit changes locally and only push when I feel they are ready. This manager insists that I push all the changes to the central repo (in case my hard drive crashes). So I push the change, and the ticket is marked as "to be tested". Next day I come in, he sits next to me and starts complaining and says that I posted above. I really didn't know what to say, I tried to explain to him that the ticket is still being worked upon but he didn't seem to listen. He interrupts me in-between when I am coding, which I do not mind, but when I do that same, his face turns like this :| and reacts as if his work was super important and I am just wasting his time. He asks me to accumulate all questions, and then ask him altogether which is not always possible, as you need a clarification before you can continue on a feature implementation. And when I am coding, he talks on the phone with his customers next to me (when he can go to the meeting room with his laptop) and doesn't care. He made me switch to a whole new IDE (from Netbeans to a commercial IDE costing a lot of money) for a really tiny feature (which I later found out was in Netbeans as well!). I didn't make a big deal out of it as I am equally comfortable working with this new IDE, but I couldn't get the science behind his obsession. He said this feature makes sure that if any method is updated by a programmer, the IDE will turn the method name to red in places where it is used. I told him that I do not have a problem since I always search for method usage in the project and make sure its updated. IDEs even have refactoring features for exactly that, but... I recently implemented a feature for a project, and I was happy about it and considering him a senior, I asked him his comments about the implementation quality.. he thought long and hard, made a few funny faces, and when he couldn't find anything, he said "ummm, your program will crash if JS is disabled" - he was wrong, since I had made sure it would work fine with default values even if JS was disabled. I told him that and then he said "oh okay". BUT, the funny thing is, a few days back, he implemented something and I objected with "But that would not run if JS is disabled" and his response was "We don't have to care about people who disable JS" :-/ Once he asked me to investigate if there was a way to modify a CMS generated menu programmatically by extending the CMS, I did my research and told him that the only was is to inject a menu item using JavaScript / jQuery and his reaction was "ah that's ugly, and hacky, not acceptable" and two days later, I see that feature implemented in the same way as I had suggested. The point is, his reaction was not respectful at all, even if what I proposed was hacky, he should be respectful, that I know what's hacky and if I am suggesting something hacky, there must be a reason for it. There are plenty of other reasons / examples where I feel I am not being treated fairly. I want your advice as to what is it that I am doing wrong and how to deal with such a situation. The other guys in the team are actually very good people, and I do not want to leave the job either (although I could, if I want to). All I want is respect and equal treatment. I have thought about talking to this guy in a face to face meeting, but that worries me that his attitude might get worse and make things more difficult for me (since he doesn't seem to be the guy who thinks he can be wrong too). I am also considering talking to the other co-founder but I am not sure how he will take it (as both founders have been friends forever). Thanks for reading the long message, I really appreciate your help.

  Read the article

• Not getting desired results with SSAO implementation

  - by user1294203

  After having implemented deferred rendering, I tried my luck with a SSAO implementation using this Tutorial. Unfortunately, I'm not getting anything that looks like SSAO, you can see my result below. You can see there is some weird pattern forming and there is no occlusion shading where there needs to be (i.e. in between the objects and on the ground). The shaders I implemented follow: #VS #version 330 core uniform mat4 invProjMatrix; layout(location = 0) in vec3 in_Position; layout(location = 2) in vec2 in_TexCoord; noperspective out vec2 pass_TexCoord; smooth out vec3 viewRay; void main(void){ pass_TexCoord = in_TexCoord; viewRay = (invProjMatrix * vec4(in_Position, 1.0)).xyz; gl_Position = vec4(in_Position, 1.0); } #FS #version 330 core uniform sampler2D DepthMap; uniform sampler2D NormalMap; uniform sampler2D noise; uniform vec2 projAB; uniform ivec3 noiseScale_kernelSize; uniform vec3 kernel[16]; uniform float RADIUS; uniform mat4 projectionMatrix; noperspective in vec2 pass_TexCoord; smooth in vec3 viewRay; layout(location = 0) out float out_AO; vec3 CalcPosition(void){ float depth = texture(DepthMap, pass_TexCoord).r; float linearDepth = projAB.y / (depth - projAB.x); vec3 ray = normalize(viewRay); ray = ray / ray.z; return linearDepth * ray; } mat3 CalcRMatrix(vec3 normal, vec2 texcoord){ ivec2 noiseScale = noiseScale_kernelSize.xy; vec3 rvec = texture(noise, texcoord * noiseScale).xyz; vec3 tangent = normalize(rvec - normal * dot(rvec, normal)); vec3 bitangent = cross(normal, tangent); return mat3(tangent, bitangent, normal); } void main(void){ vec2 TexCoord = pass_TexCoord; vec3 Position = CalcPosition(); vec3 Normal = normalize(texture(NormalMap, TexCoord).xyz); mat3 RotationMatrix = CalcRMatrix(Normal, TexCoord); int kernelSize = noiseScale_kernelSize.z; float occlusion = 0.0; for(int i = 0; i < kernelSize; i++){ // Get sample position vec3 sample = RotationMatrix * kernel[i]; sample = sample * RADIUS + Position; // Project and bias sample position to get its texture coordinates vec4 offset = projectionMatrix * vec4(sample, 1.0); offset.xy /= offset.w; offset.xy = offset.xy * 0.5 + 0.5; // Get sample depth float sample_depth = texture(DepthMap, offset.xy).r; float linearDepth = projAB.y / (sample_depth - projAB.x); if(abs(Position.z - linearDepth ) < RADIUS){ occlusion += (linearDepth <= sample.z) ? 1.0 : 0.0; } } out_AO = 1.0 - (occlusion / kernelSize); } I draw a full screen quad and pass Depth and Normal textures. Normals are in RGBA16F with the alpha channel reserved for the AO factor in the blur pass. I store depth in a non linear Depth buffer (32F) and recover the linear depth using: float linearDepth = projAB.y / (depth - projAB.x); where projAB.y is calculated as: and projAB.x as: These are derived from the glm::perspective(gluperspective) matrix. z_n and z_f are the near and far clip distance. As described in the link I posted on the top, the method creates samples in a hemisphere with higher distribution close to the center. It then uses random vectors from a texture to rotate the hemisphere randomly around the Z direction and finally orients it along the normal at the given pixel. Since the result is noisy, a blur pass follows the SSAO pass. Anyway, my position reconstruction doesn't seem to be wrong since I also tried doing the same but with the position passed from a texture instead of being reconstructed. I also tried playing with the Radius, noise texture size and number of samples and with different kinds of texture formats, with no luck. For some reason when changing the Radius, nothing changes. Does anyone have any suggestions? What could be going wrong?

  Read the article

• The Apple iPad &ndash; I&rsquo;m gonna get it!

  - by Sahil Malik

  Ad:: SharePoint 2007 Training in .NET 3.5 technologies (more information). Well, heck, here comes another non-techie blogpost. You know I’m a geek, so I love gadgets! I found it RATHER interesting to see all the negative news on the blogosphere about the iPad. The main bitch points are - No Multi tasking No Flash Just a bigger iPhone. So here’s the deal! My view is, the above 3 are EXACTLY what I had personally hoped for in the Apple iPad. Before the release, I had gone on the record saying - “If the Apple Tablet is able to run full fledged iTunes (so I can get rid of iTunes on my desktop, I don’t like iTunes on Windows), can browse the net, can read PDFs, and will be under $1000, I’ll buy it”. Well, so, the released iPad wasn’t exactly like my dream tablet. The biggest downer IMO was it’s inability to run full iTunes. But, really, in retrospect, I like the newly released iPad. And here is why. No Multi tasking and No Flash, means much better battery life. Frankly, I rarely multi task on my laptop/desktop .. yeah I know my OS does .. but ME – I don’t multi task, and I don’t think you do either!! As I type this blogpost, I have a few windows running behind the scenes, but they are simply waiting for me to get back to them. The only thing truly running and I am making use of, other than this blogost, is media player playing some music – which the iPad can do. Also, I am logged into IM/Email – which again, iPad can do via notifications. It does the limited multitasking I need, without chewing down on batteries. Smart thinking, precisely the reason I love the iPhone. I don’t want a bulky battery consuming machine. Lack of flash? Okay sure, I can’t see Hulu on my iPad. That’s some loss. I can see youtube. Also, per Adobe I can’t see some porn sites, which I don’t want to see on my iPad. But, Flash is heavy. Especially flash video. My dream is to see silverlight run on the iPhone and iPad. No flash = not such a big loss. Speaking of battery life – 10 hours is plenty. I haven’t been away from electricity for that long usually, so I’m okay with charging it up when it runs low. It’s really not such a big deal honestly. Finally, eBook functionality – wow! I went on the record saying, eBook readers are not for me, but seriously, the iPad is perfect for my eBook needs at least. And as far it being just a bigger iPhone? I’ve always wanted a bigger iPhone, precisely for the eBook reading experience. I love my iPhone, I love the apps on it. The only thing that sucks about the iPhone is battery life, but other than that, it is the best gadget I have ever bought! And something that runs on mobile chips, is that thin, and those newly written apps .. mail, calendar .. I am very very excited to get my iPad, which will be the 64gig 3G version. The biggest plus in an iPad ……… no contract on data. I am *hoping*, this means that I can buy a SIM card in Europe, and use the iPad here. That would be killer awesome! But hey, if I had to pick downers in the iPad, they would be - - I wish they had a 128G Version. Now that we have a good video viewing machine, I know I’d chew up space quickly.- Sync over WIFI, seriously Apple.  Both for iPhone and iPad.- 3 month wait!!- Existing iPhone users should get a discount on the iPad data plan. Comment on the article ....

  Read the article

• Project of Projects with team Foundation Server 2010

  - by Martin Hinshelwood

  It is pretty much accepted that you should use Areas instead of having many small Team Projects when you are using Team Foundation Server 2010. I have implemented this scenario many times and this is the current iteration of layout and considerations. If like me you work with many customers you will find that you get into a grove for how to set these things up to make them as easily understandable for everyone, while giving the best functionality. The trick is in making it as intuitive as possible for both you and the developers that need to work with it. There are five main places where you need to have the Product or Project name in prominence of any other value. Area Iteration Source Code Work Item Queries Build Once you decide how you are doing this in each of these places you need to keep to it religiously. Evan if you have one source code file to keep, make sure it is in the right place. This makes your developers and others working with the format familiar with where everything should go, as well as building up mussel memory. This prevents the neat system degenerating into a nasty mess. Areas Areas are traditionally used to separate out parts of your product / project so that you can see how much effort has gone into each. Figure: The top level areas are for reporting and work item separation There are massive advantages of using this method. You can: move work from one project to another rename a project / product It is far more likely that a project or product gets renamed than a department. Tip: If you have many projects, over 100, you should consider categorising them here, but make sure that the actual project name always sits at the same level so you know which is which. Figure: Always keep things that are the same at the same level Note: You may use these categories only at the Area/Iteration level to make it easier to select on drop down lists. You may not want to use them everywhere. On the other hand, for consistency it would be better to. Iterations Iterations are usually used to some sort of time based consideration. Here I am splitting into Iterations with periodic releases. Figure: Each product needs to be able to have its own cadence The ability to have each project run at its own pace and to enable them to have their own release schedule is often of paramount importance and you don’t want to fix your 100+ projects to all be released on the same date. Source Code Having a good structure for your source even if you are not branching or having multiple products under the same structure is always a good idea. Figure: Separate out your products source You need to think about both your branches as well as the structure of your source. All your code should be under “Source” and everything you need to build your solution including Build Scripts and 3rd party tools should be under your “Main” (branch) folder. This should them be branched by “Quality”, “Release” or both to get the most out of your branching structure. The important thing is to make sure you branch (or be able to branch) everything you need to build, test and deploy your application to an environment. That environment may be development, test or even production, but I can’t stress the importance of having everything your need. Note: You usually will not be able to install custom software on your build server. Store any *.dll’s or *.exe’s that you need under the “Tools\Tool1” folder. Note: Consult the Branching Guidance for Team Foundation Server 2010 for more on branching Figure: Adding category may be a necessary evil Even if you have to have a couple of categories called “Default”, it is better than not knowing the difference between a folder, Product and Branch. Work Item Queries Queries are used to load lists of Work Items out of TFS so you can see what work you have. This means that you want to also separate queries out by Product / project to make it easier to Figure: Again you have the same first level structure Having Folders also in Work Item Tracking we do the same thing. We put all the queries under a folder named for the Product / Project and change each query to have “AreaPath=[TeamProject]\[ProductX]” in the query instead of the standard “Project=@Project”. Tip: Don’t have a folder with new queries for each iteration. Instead have a single “Current” folder that has queries that point to the current iteration. Just change the queries as you move from one iteration to another. Tip: You can ctrl+drag the “Product1” folder to create your “Product2” folder. Builds You may have many builds both for individual products but also for different quality's. This can be further complicated by having some builds that action “Gated Check-In” and others that are specifically for “Release”, “Test” or another purpose. Figure: There are no folders, yet, for the builds so you need a good naming convention Its a pity that there are no folders under builds, some way to categorise would be nice. In lue of that at the moment you can use a functional naming convention that at least allows you to find what you want. Conclusion It is really easy to both achieve and to stick to this format if you take the time to do it. Unless you have 1000+ builds or 100+ Products you are unlikely run into any issues. Even then there are things you can do to mitigate the issues and I have describes some of them above. Let me know if you can think of any other things to make this easier.

  Read the article

• jQuery with SharePoint solutions

  - by KunaalKapoor

  For me jQuery is the 'Plan-B' for everything.And most of my projects include the use of jQuery for something or the other, so I decided to write a small note on what works best while using jQuery along with SharePoint.I prefer to use the jQuery JavaScript library, which is far more robust, easier to use, and allows for plugins. Follow the steps below to add jQuery to your master page. For office 365, the prefered location to add jQuery files is the "Site Asserts" library.Deployment Best PracticesThey are only as good as the context it’s being referenced.  In other words, take into account your world before applying it.Script your deployment options.  Folder in SPD. Use the file system.  Make external references.  The JQuery library is on the Microsoft Ajax Content Delivery Network. You may even choose to publish to and from the document library. (pros and cons to this approach)Reference options when referencing the script.ScriptLink will make sure it’s loaded at the top of the page and only loaded once. You need Visual Studio or SPDContent Editor Web Part (CEWP).  Drop it on the page and it’s there.  Easy but dangerousCustom Actions. Great for global deployments of JQuery.  Loads it on every page. It also works in Sandbox installations.Deployment Maintenance Dont’sDon’t add scripts directly to your Master Page. That’s way too much effort because the pages are hard to maintain.Don’t add scripts directly to the CEWP.  Use a content link instead. That will allow for reuse. If you or someone deletes the CEWP you won’t lose code in the web partSecurity.  Any scripts run with the same privileges of the current user.  In other words, you can’t get in trouble.Development Best PracticesDon’t abuse the DOM.  There are better options to load the DOM without hitting it 1,000 times.User other performance boosters.Try other libraries.  Try some custom codeAvoid String conversionMinify your filesUse CAML to reduce number of returns rowsOnly update your JQuery library AFTER RIGOROUS REGRESSION TESTINGCRUD operations can come with some funSP Services wraps SharePoint’s web services for executionThe Bing SDK is pretty easy to use.  You can add it to your page with a script,  put it into a content editor web part and connect it from the address parameters in a list.Steps:1. Go to jquery.com and download the latest jQuery library to your desktop. You want to get the compressed production version, not the development version.2. Open SharePoint Designer (SPD) and connect to the root level of your site's site collection.In SPD, open the "Style Library" folder. Create a folder named "Scripts" inside of the Style Library. Drag the jQuery library JavaScript file from your desktop into the Scripts folder.In the Scripts folder, create a new JavaScript file and name it (e.g. "actions.js").3. If you are using visual studio add a folder for js, you can create a new folder at the root level or if you prefer more cleaner solutions like me, you can use the layouts folder which cleans out on deactivation/uninstall.4. Within the <head> tag of the master page, add a script reference to the jQuery library just above the content place holder named "PlaceHolderAdditonalPageHead" (and above your custom CSS references, if applicable) as follows:<script src="/Style%20Library/Scripts/{jquery library file}.js" type="text/javascript"></script>Immediately after the jQuery library reference add a script reference to your custom scripts file as follows:<script src="/Style%20Library/Scripts/actions.js" type="text/javascript"></script>Inside your script tag, you can test if jQuery is already defined and if not, then add it to the page.<script type='text/javascript'>  if (typeof jQuery == 'undefined')    document.write('<scr'+'ipt type="text/javascript" src="http://code.jquery.com/jquery-1.6.1.min.js"></sc'+'ript>');</script>For the inquisitive few... Read on if you'd like :)Why jQuery on SharePoiny is AwesomeIt’s all about that visual wow factor.  You can get past that, “But it looks like SharePoint”  Take a long list view and put it into JQuery with pagination, etc and you are the hero.  It’s also about new controls you get with JQuery that you couldn’t do before.Why jQuery with SharePoint should be AwfulAlthough it’s fairly easy to get jQuery up and running. Copy/Paste can cause a problem.  If you don’t understand what it’s doing in the Client Object Model and the Document Object Model then it will do things on your site that were completely unexpected. Many blogs will note workarounds they employed on their sites. Why it’s not working: Debugging “sucks”.You need to develop small blocks of functionality, Test it by putting in some alerts  and console.log. Set breakpoints and monitor the DOM via Firebug and some IE development toolsPerformance - It happens all the time. But you should look at the tradeoffs. More time may give you more functionality.Consistency - ”But it works fine on my computer. So test on many browsers.  Take into account client resourcesHarm the Farm -  You need to code wisely and negatively test.  Don’t be the cause of a DoS attack that’s really JQuery asking for a resource over and over and over again.  So code wisely. Do negative testing. Monitor Server Resources.They also did a demo where JQuery did an endless loop to pull data from a list. It’s a poor decision but also an easy mistake.  They spiked their server resources within a couple seconds and had to shut down the call before it brought it down.ConclusionJQuery is now another tool in your tool kit. You don’t have to use it. Use it where it makes sense and where it helps you get your job done.Don’t abuse it, you will pay for it laterIt will add to page bloat so take that into accountIt can slow your performance

  Read the article

• How many developers before continuous integration becomes effective for us?

  - by Carnotaurus

  There is an overhead associated with continuous integration, e.g., set up, re-training, awareness activities, stoppage to fix "bugs" that turn out to be data issues, enforced separation of concerns programming styles, etc. At what point does continuous integration pay for itself? EDIT: These were my findings The set-up was CruiseControl.Net with Nant, reading from VSS or TFS. Here are a few reasons for failure, which have nothing to do with the setup: Cost of investigation: The time spent investigating whether a red light is due a genuine logical inconsistency in the code, data quality, or another source such as an infrastructure problem (e.g., a network issue, a timeout reading from source control, third party server is down, etc., etc.) Political costs over infrastructure: I considered performing an "infrastructure" check for each method in the test run. I had no solution to the timeout except to replace the build server. Red tape got in the way and there was no server replacement. Cost of fixing unit tests: A red light due to a data quality issue could be an indicator of a badly written unit test. So, data dependent unit tests were re-written to reduce the likelihood of a red light due to bad data. In many cases, necessary data was inserted into the test environment to be able to accurately run its unit tests. It makes sense to say that by making the data more robust then the test becomes more robust if it is dependent on this data. Of course, this worked well! Cost of coverage, i.e., writing unit tests for already existing code: There was the problem of unit test coverage. There were thousands of methods that had no unit tests. So, a sizeable amount of man days would be needed to create those. As this would be too difficult to provide a business case, it was decided that unit tests would be used for any new public method going forward. Those that did not have a unit test were termed 'potentially infra red'. An intestesting point here is that static methods were a moot point in how it would be possible to uniquely determine how a specific static method had failed. Cost of bespoke releases: Nant scripts only go so far. They are not that useful for, say, CMS dependent builds for EPiServer, CMS, or any UI oriented database deployment. These are the types of issues that occured on the build server for hourly test runs and overnight QA builds. I entertain that these to be unnecessary as a build master can perform these tasks manually at the time of release, esp., with a one man band and a small build. So, single step builds have not justified use of CI in my experience. What about the more complex, multistep builds? These can be a pain to build, especially without a Nant script. So, even having created one, these were no more successful. The costs of fixing the red light issues outweighed the benefits. Eventually, developers lost interest and questioned the validity of the red light. Having given it a fair try, I believe that CI is expensive and there is a lot of working around the edges instead of just getting the job done. It's more cost effective to employ experienced developers who do not make a mess of large projects than introduce and maintain an alarm system. This is the case even if those developers leave. It doesn't matter if a good developer leaves because processes that he follows would ensure that he writes requirement specs, design specs, sticks to the coding guidelines, and comments his code so that it is readable. All this is reviewed. If this is not happening then his team leader is not doing his job, which should be picked up by his manager and so on. For CI to work, it is not enough to just write unit tests, attempt to maintain full coverage, and ensure a working infrastructure for sizable systems. The bottom line: One might question whether fixing as many bugs before release is even desirable from a business prespective. CI involves a lot of work to capture a handful of bugs that the customer could identify in UAT or the company could get paid for fixing as part of a client service agreement when the warranty period expires anyway.

  Read the article

• Use your own domain email and tired of SPAM? SPAMfighter FTW

  - by Dave Campbell

  I wouldn't post this if I hadn't tried it... and I paid for it myself, so don't anybody be thinking I'm reviewing something someone sent me! Long ago and far away I got very tired of local ISPs and 2nd phone lines and took the plunge and got hooked up to cable... yeah I know the 2nd phone line concept may be hard for everyone to understand, but that's how it was in 'the old days'. To avoid having to change email addresses all the time, I decided to buy a domain name, get minimal hosting, and use that for all email into the house. That way if I changed providers, all the email addresses wouldn't have to change. Of course, about a dozen domains later, I have LOTS of pop email addresses and even an exchange address to my client's server... times have changed. What also has changed is the fact that we get SPAM... 'back in the day' when I was a beta tester for the first ISP in Phoenix, someone tried sending an ad to all of us, and what he got in return for his trouble was a bunch of core dumps that locked up his email... if you don't know what a core dump is, ask your grandfather. But in today's world, we're all much more civilized than that, and as with many things, the criminals seem to have much more rights than we do, so we get inundated with email offering all sorts of wild schemes that you'd have to be brain-dead to accept, but yet... if people weren't accepting them, they'd stop sending them. I keep hoping that survival of the smartest would weed out the mental midgets that respond and then the jumk email stop, but that hasn't happened yet anymore than finding high-quality hearing aids at the checkout line of Safeway because of all the dimwits playing music too loud inside their car... but that's another whole topic and I digress. So what's the solution for all the spam? And I mean *all*... on that old personal email address, I am now getting over 150 spam messages a day! Yes I know that's why God invented the delete key, but I took it on as a challenge, and it's a matter of principle... why should I switch email addresses, or convert from [email protected] to something else, or have all my email filtered through some service just because some A-Hole somewhere has a site up trying to phish Ma & Pa Kettle (ask your grandfather about that too) out of their retirement money? Well... I got an email from my cousin the other day while I was writing yet another email rule, and there was a banner on the bottom of his email that said he was protected by SPAMfighter. SPAMfighter huh.... so I took a look at their site, and found yet one more of the supposed tools to help us. But... I read that they're a Microsoft Gold Partner... and that doesn't come lightly... so I took a gamble and here's what I found: I installed it, and had to do a couple things: 1) SPAMfighter stuffed the SPAMfighter folder into my client's exchange address... I deleted it, made a new SPAMfighter folder where I wanted it to go, then in the SPAMfighter Clients settings for Outlook, I told it to put all spam there. 2) It didn't seem to be doing anything. There's a ribbon button that you can select "Block", and I did that, wondering if I was 'training' it, but it wasn't picking up duplicates 3) I sent email to support, and wrote a post on the forum (not to self: reply to that post). By the time the folks from the home office responded, it was the next day, and first up, SPAMfighter knocked down everything that came through when Outlook opend... two thumbs up! I disabled my 'garbage collection' rule from Outlook, and told Outlook not to use the junk folder thinking it was interfering. 4) Day 2 seemed to go about like Day 1... but I hung in there. 5) Day 3 is now a whole new day... I had left Outlook open and hadn't looked at the PC since sometime late yesterday afternoon, and when I looked this morning, *every bit* of spam was in the SPAMfighter folder!! I'm a new paying customer After watching SPAMfighter work this morning, I've purchased a 1-year license, and I now can sit and watch as emails come in and disappear from my inbox into the SPAMfighter folder. No more continual tweaking of the rules. I've got SPAMfighter set to 'Very Hard' filtering... personally I'd rather pull the few real emails out of the SPAMfighter folder than pull spam out of the real folders. Yes this is simply another way of using the delete key, but you know what? ... it feels good :) Here's a screenshot of the stats after just about 48 hours of being onboard: Note that all the ones blocked by me were during Day 1 and 2... I've blocked none today, and everything is blocked. Stay in the 'Light!

  Read the article

• MVVM - how to make creating viewmodels at runtime less painfull

  - by Mr Happy

  I apologize for the long question, it reads a bit as a rant, but I promise it's not! I've summarized my question(s) below In the MVC world, things are straightforward. The Model has state, the View shows the Model, and the Controller does stuff to/with the Model (basically), a controller has no state. To do stuff the Controller has some dependencies on web services, repository, the lot. When you instantiate a controller you care about supplying those dependencies, nothing else. When you execute an action (method on Controller), you use those dependencies to retrieve or update the Model or calling some other domain service. If there's any context, say like some user wants to see the details of a particular item, you pass the Id of that item as parameter to the Action. Nowhere in the Controller is there any reference to any state. So far so good. Enter MVVM. I love WPF, I love data binding. I love frameworks that make data binding to ViewModels even easier (using Caliburn Micro a.t.m.). I feel things are less straightforward in this world though. Let's do the exercise again: the Model has state, the View shows the ViewModel, and the ViewModel does stuff to/with the Model (basically), a ViewModel does have state! (to clarify; maybe it delegates all the properties to one or more Models, but that means it must have a reference to the model one way or another, which is state in itself) To do stuff the ViewModel has some dependencies on web services, repository, the lot. When you instantiate a ViewModel you care about supplying those dependencies, but also the state. And this, ladies and gentlemen, annoys me to no end. Whenever you need to instantiate a ProductDetailsViewModel from the ProductSearchViewModel (from which you called the ProductSearchWebService which in turn returned IEnumerable<ProductDTO>, everybody still with me?), you can do one of these things: call new ProductDetailsViewModel(productDTO, _shoppingCartWebService /* dependcy */);, this is bad, imagine 3 more dependencies, this means the ProductSearchViewModel needs to take on those dependencies as well. Also changing the constructor is painfull. call _myInjectedProductDetailsViewModelFactory.Create().Initialize(productDTO);, the factory is just a Func, they are easily generated by most IoC frameworks. I think this is bad because Init methods are a leaky abstraction. You also can't use the readonly keyword for fields that are set in the Init method. I'm sure there are a few more reasons. call _myInjectedProductDetailsViewModelAbstractFactory.Create(productDTO); So... this is the pattern (abstract factory) that is usually recommended for this type of problem. I though it was genious since it satisfies my craving for static typing, until I actually started using it. The amount of boilerplate code is I think too much (you know, apart from the ridiculous variable names I get use). For each ViewModel that needs runtime parameters you'll get two extra files (factory interface and implementation), and you need to type the non-runtime dependencies like 4 extra times. And each time the dependencies change, you get to change it in the factory as well. It feels like I don't even use an DI container anymore. (I think Castle Windsor has some kind of solution for this [with it's own drawbacks, correct me if I'm wrong]). do something with anonymous types or dictionary. I like my static typing. So, yeah. Mixing state and behavior in this way creates a problem which don't exist at all in MVC. And I feel like there currently isn't a really adequate solution for this problem. Now I'd like to observe some things: People actually use MVVM. So they either don't care about all of the above, or they have some brilliant other solution. I haven't found an indepth example of MVVM with WPF. For example, the NDDD-sample project immensely helped me understand some DDD concepts. I'd really like it if someone could point me in the direction of something similar for MVVM/WPF. Maybe I'm doing MVVM all wrong and I should turn my design upside down. Maybe I shouldn't have this problem at all. Well I know other people have asked the same question so I think I'm not the only one. To summarize Am I correct to conclude that having the ViewModel being an integration point for both state and behavior is the reason for some difficulties with the MVVM pattern as a whole? Is using the abstract factory pattern the only/best way to instantiate a ViewModel in a statically typed way? Is there something like an in depth reference implementation available? Is having a lot of ViewModels with both state/behavior a design smell?

  Read the article

• Seven Random Thoughts on JavaOne

  - by HecklerMark

  As most people reading this blog may know, last week was JavaOne. There are a lot of summary/recap articles popping up now, and while I didn't want to just "add to pile", I did want to share a few observations. Disclaimer: I am an Oracle employee, but most of these observations are either externally verifiable or based upon a collection of opinions from Oracle and non-Oracle attendees alike. Anyway, here are a few take-aways: The Java ecosystem is alive and well, with a breadth and depth that is impossible to adequately describe in a short post...or a long post, for that matter. If there is any one area within the Java language or JVM that you would like to - or need to - know more about, it's well-represented at J1. While there are several IDEs that are used to great effect by the developer community, NetBeans is on a roll. I lost count how many sessions mentioned or used NetBeans, but it was by far the dominant IDE in use at J1. As a recent re-convert to NetBeans, I wasn't surprised others liked it so well, only how many. OpenJDK, OpenJFX, etc. Many developers were understandably concerned with the change of sponsorship/leadership when Java creator and longtime steward Sun Microsystems was acquired by Oracle. The read I got from attendees regarding Oracle's stewardship was almost universally positive, and the push for "openness" is deep and wide within the current Java environs. Few would probably have imagined it to be this good, this soon. Someone observed that "Larry (Ellison) is competitive, and he wants to be the best...so if he wants to have a community, it will be the best community on the planet." Like any company, Oracle is bound to make missteps, but leadership seems to be striking an excellent balance between embracing open efforts and innovating in competitive paid offerings. JavaFX (2.x) isn't perfect or comprehensive, but a great many people (myself included) see great potential, are developing for it, and are really excited about where it is and where it may be headed. This is another part of the Java ecosystem that has impressive depth for being so new (JavaFX 1.x aside). If you haven't kicked the tires yet, give it a try! You'll be surprised at how capable and versatile it is, and you'll probably catch yourself smiling while coding again.  :-) JavaEE is everywhere. Not exactly a newsflash, but there is a lot of buzz around EE still/again/anew. Sessions ranged from updated component specs/technologies to Websockets/HTML5, from frameworks to profiles and application servers. Programming "server-side" Java isn't confined to the server (as you no doubt realize), and if you still consider JavaEE a cumbersome beast, you clearly haven't been using the last couple of versions. Download GlassFish or the WebLogic Zip distro (or another JavaEE 6 implementation) and treat yourself. JavaOne is not inexpensive, but to paraphrase an old saying, "If you think that's expensive, you should try ignorance." :-) I suppose it's possible to attend J1 and learn nothing, but you'd have to really work at it! Attending even a single session is bound to expand your horizons and make you approach your code, your problem domain, differently...even if it's a session about something you already know quite well. The various presenters offer vastly different perspectives and challenge you to re-think your own approach(es). And finally, if you think the scheduled sessions are great - and make no mistake, most are clearly outstanding - wait until you see what you pick up from what I like to call the "hallway sessions". Between the presentations, people freely mingle in the hallways, go to lunch and dinner together, and talk. And talk. And talk. Ideas flow freely, sparking other ideas and the "crowdsourcing" of knowledge in a way that is hard to imagine outside of a conference of this magnitude. Consider this the "GO" part of a "BOGO" (Buy One, Get One) offer: you buy the ticket to the "structured" part of JavaOne and get the hallway sessions at no additional charge. They're really that good. If you weren't able to make it to JavaOne this year, you can still watch/listen to the sessions online by visiting the JavaOne course catalog and clicking the media link(s) in the right column - another demonstration of Oracle's commitment to the Java community. But make plans to be there next year to get the full benefit! You'll be glad you did. All the best,Mark P.S. - I didn't mention several other exciting developments in areas like the embedded space and the "internet of things" (M2M), robotics, optimization, and the cloud (among others), but I think you get the idea. JavaOne == brainExpansion;  Hope to see you there next year!

  Read the article

• Level of detail algorithm not functioning correctly

  - by Darestium

  I have been working on this problem for months; I have been creating Planet Generator of sorts, after more than 6 months of work I am no closer to finishing it then I was 4 months ago. My problem; The terrain does not subdivide in the correct locations properly, it almost seems as if there is a ghost camera next to me, and the quads subdivide based on the position of this "ghost camera". Here is a video of the broken program: http://www.youtube.com/watch?v=NF_pHeMOju8 The best example of the problem occurs around 0:36. For detail limiting, I am going for a chunked LOD approach, which subdivides the terrain based on how far you are away from it. I use a "depth table" to determine how many subdivisions should take place. void PQuad::construct_depth_table(float distance) { tree[0] = -1; for (int i = 1; i < MAX_DEPTH; i++) { tree[i] = distance; distance /= 2.0f; } } The chuncked LOD relies on the child/parent structure of quads, the depth is determined by a constant e.g: if the constant is 6, there are six levels of detail. The quads which should be drawn go through a distance test from the player to the centre of the quad. void PQuad::get_recursive(glm::vec3 player_pos, std::vector<PQuad*>& out_children) { for (size_t i = 0; i < children.size(); i++) { children[i].get_recursive(player_pos, out_children); } if (this->should_draw(player_pos) || this->depth == 0) { out_children.emplace_back(this); } } bool PQuad::should_draw(glm::vec3 player_position) { float distance = distance3(player_position, centre); if (distance < tree[depth]) { return true; } return false; } The root quad has four children which could be visualized like the following: [] [] [] [] Where each [] is a child. Each child has the same amount of children up until the detail limit, the quads which have are 6 iterations deep are leaf nodes, these nodes have no children. Each node has a corresponding Mesh, each Mesh structure has 16x16 Quad-shapes, each Mesh's Quad-shapes halves in size each detail level deeper - creating more detail. void PQuad::construct_children() { // Calculate the position of the Quad based on the parent's location calculate_position(); if (depth < (int)MAX_DEPTH) { children.reserve((int)NUM_OF_CHILDREN); for (int i = 0; i < (int)NUM_OF_CHILDREN; i++) { children.emplace_back(PQuad(this->face_direction, this->radius)); PQuad *child = &children.back(); child->set_depth(depth + 1); child->set_child_index(i); child->set_parent(this); child->construct_children(); } } else { leaf = true; } } The following function creates the vertices for each quad, I feel that it may play a role in the problem - I just can't determine what is causing the problem. void PQuad::construct_vertices(std::vector<glm::vec3> *vertices, std::vector<Color3> *colors) { vertices->reserve(quad_width * quad_height); for (int y = 0; y < quad_height; y++) { for (int x = 0; x < quad_width; x++) { switch (face_direction) { case YIncreasing: vertices->emplace_back(glm::vec3(position.x + x * element_width, quad_height - 1.0f, -(position.y + y * element_width))); break; case YDecreasing: vertices->emplace_back(glm::vec3(position.x + x * element_width, 0.0f, -(position.y + y * element_width))); break; case XIncreasing: vertices->emplace_back(glm::vec3(quad_width - 1.0f, position.y + y * element_width, -(position.x + x * element_width))); break; case XDecreasing: vertices->emplace_back(glm::vec3(0.0f, position.y + y * element_width, -(position.x + x * element_width))); break; case ZIncreasing: vertices->emplace_back(glm::vec3(position.x + x * element_width, position.y + y * element_width, 0.0f)); break; case ZDecreasing: vertices->emplace_back(glm::vec3(position.x + x * element_width, position.y + y * element_width, -(quad_width - 1.0f))); break; } // Position the bottom, right, front vertex of the cube from being (0,0,0) to (-16, -16, 16) (*vertices)[vertices->size() - 1] -= glm::vec3(quad_width / 2.0f, quad_width / 2.0f, -(quad_width / 2.0f)); colors->emplace_back(Color3(255.0f, 255.0f, 255.0f, false)); } } switch (face_direction) { case YIncreasing: this->centre = glm::vec3(position.x + quad_width / 2.0f, quad_height - 1.0f, -(position.y + quad_height / 2.0f)); break; case YDecreasing: this->centre = glm::vec3(position.x + quad_width / 2.0f, 0.0f, -(position.y + quad_height / 2.0f)); break; case XIncreasing: this->centre = glm::vec3(quad_width - 1.0f, position.y + quad_height / 2.0f, -(position.x + quad_width / 2.0f)); break; case XDecreasing: this->centre = glm::vec3(0.0f, position.y + quad_height / 2.0f, -(position.x + quad_width / 2.0f)); break; case ZIncreasing: this->centre = glm::vec3(position.x + quad_width / 2.0f, position.y + quad_height / 2.0f, 0.0f); break; case ZDecreasing: this->centre = glm::vec3(position.x + quad_width / 2.0f, position.y + quad_height / 2.0f, -(quad_height - 1.0f)); break; } this->centre -= glm::vec3(quad_width / 2.0f, quad_width / 2.0f, -(quad_width / 2.0f)); } Any help in discovering what is causing this "subdivding in the wrong place" would be greatly appreciated.

  Read the article

• Modularity through HTTP

  - by Michael Williamson

  As programmers, we strive for modularity in the code we write. We hope that splitting the problem up makes it easier to solve, and allows us to reuse parts of our code in other applications. Object-orientation is the most obvious of many attempts to get us closer to this ideal, and yet one of the most successful approaches is almost accidental: the web. Programming languages provide us with functions and classes, and plenty of other ways to modularize our code. This allows us to take our large problem, split it into small parts, and solve those small parts without having to worry about the whole. It also makes it easier to reason about our code. So far, so good, but now that we’ve written our small, independent module, for example to send out e-mails to my customers, we’d like to reuse it in another application. By creating DLLs, JARs or our platform’s package container of choice, we can do just that – provided our new application is on the same platform. Want to use a Java library from C#? Well, good luck – it might be possible, but it’s not going to be smooth sailing. Even if a library exists, it doesn’t mean that using it going to be a pleasant experience. Say I want to use Java to write out an XML document to an output stream. You’d imagine this would be a simple one-liner. You’d be wrong: import org.w3c.dom.*; import java.io.*; import javax.xml.transform.*; import javax.xml.transform.dom.*; import javax.xml.transform.stream.*; private static final void writeDoc(Document doc, OutputStream out) throws IOException { try { Transformer t = TransformerFactory.newInstance().newTransformer(); t.setOutputProperty(OutputKeys.DOCTYPE_SYSTEM, doc.getDoctype().getSystemId()); t.transform(new DOMSource(doc), new StreamResult(out)); } catch (TransformerException e) { throw new AssertionError(e); // Can't happen! } } Most of the time, there is a good chance somebody else has written the code before, but if nobody can understand the interface to that code, nobody’s going to use it. The result is that most of the code we write is just a variation on a theme. Despite our best efforts, we’ve fallen a little short of our ideal, but the web brings us closer. If we want to send e-mails to our customers, we could write an e-mail-sending library. More likely, we’d use an existing one for our language. Even then, we probably wouldn’t have niceties like A/B testing or DKIM signing. Alternatively, we could just fire some HTTP requests at MailChimp, and get a whole slew of features without getting anywhere near the code that implements them. The web is inherently language agnostic. So long as your language can send and receive text over HTTP, and probably parse some JSON, you’re about as well equipped as anybody. Instead of building libraries for a specific language, we can build a service that almost every language can reuse. The text-based nature of HTTP also helps to limit the complexity of the API. As SOAP will attest, you can still make a horrible mess using HTTP, but at least it is an obvious horrible mess. Complex data structures are tedious to marshal to and from text, providing a strong incentive to keep things simple. By contrast, spotting the complexities in a class hierarchy is often not as easy. HTTP doesn’t solve every problem. It probably isn’t such a good idea to use it inside an inner loop that’s executed thousands of times per second. What’s more, the HTTP approach might introduce some new problems. We often need to add a thin shim to each application that we wish to communicate over HTTP. For instance, we might need to write a small plugin in PHP if we want to integrate WordPress into our system. Suddenly, instead of a system written in one language, we’re maintaining a system with several distinct languages and platforms. Even then, we should strive to avoid re-implementing the same old thing. As programmers, we consistently underestimate both the cost of building a system and the ongoing maintenance. If we allow ourselves to integrate existing applications, even if they’re in unfamiliar languages, we save ourselves those development and maintenance costs, as well as being able to pick the best solution for our problem. Thanks to the web, HTTP is often the easiest way to get there.

  Read the article

• Updates broke my themes/shell [Ubuntu 12.04 running Gnome 3 ]

  - by APNW

  I am running gnome-session 3.4.2.1. After the latest updates (listed below) my theme regressed to what looks like tango - not sure. Am unable to change it using Gnome-tweak tool or the display settings. I am also unable to change the wallpaper. Here's what it looks like: Synaptic: Chromium and this is the wallpaper page even though I have selected the wallpaper, it actually does not change. This same problem occurred on my personal computer, and one other computer I have, all running the same software/config. The interesting thing is that while Gnome 3 and Unity are affected, Cinnamon is not. What I've done so far: purged and re-installed both gnome 3 and Unity- no change noted. So, how do I fix this? Thanks Here's the installation log: Start-Date: 2013-11-07 12:01:28 Upgrade: chromium-browser-l10n:i386 (28.0.1500.71-0ubuntu1.12.04.1, 30.0.1599.114-0ubuntu0.12.04.3), libswscale2:i386 (0.8.6-0ubuntu0.12.04.1, 0.8.8-0ubuntu0.12.04.1), chromium-codecs-ffmpeg:i386 (28.0.1500.71-0ubuntu1.12.04.1, 30.0.1599.114-0ubuntu0.12.04.3), chromium-browser:i386 (28.0.1500.71-0ubuntu1.12.04.1, 30.0.1599.114-0ubuntu0.12.04.3), libpostproc52:i386 (0.8.6-0ubuntu0.12.04.1, 0.8.8-0ubuntu0.12.04.1), libavcodec-extra-53:i386 (0.8.6ubuntu0.12.04.1, 0.8.8ubuntu0.12.04.1), libavformat53:i386 (0.8.6-0ubuntu0.12.04.1, 0.8.8-0ubuntu0.12.04.1), libavutil-extra-51:i386 (0.8.6ubuntu0.12.04.1, 0.8.8ubuntu0.12.04.1) End-Date: 2013-11-07 12:02:00 Start-Date: 2013-11-07 17:32:55 Commandline: aptdaemon role='role-commit-packages' sender=':1.136' Install: libmusicbrainz5-0:i386 (5.0.1-2~precise2), udisks2:i386 (1.98.0-1~precise1), libclutter-gst-1.0-0:i386 (1.5.4-0ubuntu2), libudisks2-0:i386 (1.98.0-1~precise1), cinnamon-session-common:i386 (2.0.4-20131105043005-precise), librhythmbox-core6:i386 (2.97-1ubuntu1~precise1), gcr:i386 (3.4.1-3~precise1), libcluttergesture-0.0.2-0:i386 (0.0.2.1-2ubuntu3), libmx-1.0-2:i386 (1.4.3-0ubuntu1), guile-2.0-libs:i386 (2.0.5+1-1), libclutter-imcontext-0.1-0:i386 (0.1.4-2build1), libnatpmp1:i386 (20110808-3ubuntu1) Upgrade: gnome-keyring:i386 (3.2.2-2ubuntu4.1, 3.4.1-4ubuntu1~precise1), cinnamon:i386 (2.0.6-20131026040307-precise, 2.0.10-20131105040309-precise), gir1.2-muffin-3.0:i386 (2.0.3-20131023003029-precise, 2.0.3-20131105003012-precise), gir1.2-totem-1.0:i386 (3.0.1-0ubuntu21.1, 3.4.3-0ubuntu1~precise1), nemo:i386 (2.0.2-20131023010018-precise, 2.0.5-20131105010007-precise), aisleriot:i386 (3.2.3.2-0ubuntu1, 3.4.1-1~precise1), procps:i386 (3.2.8-11ubuntu6.2, 3.2.8-11ubuntu6.3), libcinnamon-desktop0:i386 (2.0.2-20131025011504-precise, 2.0.3-20131105011505-precise), libgck-1-0:i386 (3.2.2-2ubuntu4.1, 3.4.1-3~precise1), totem-plugins:i386 (3.0.1-0ubuntu21.1, 3.4.3-0ubuntu1~precise1), cinnamon-desktop-data:i386 (2.0.2-20131025011504-precise, 2.0.3-20131105011505-precise), rhythmbox:i386 (2.96-0ubuntu4.3, 2.97-1ubuntu1~precise1), libgcr-3-1:i386 (3.2.2-2ubuntu4.1, 3.4.1-3~precise1), seahorse:i386 (3.2.2-0ubuntu2.1, 3.4.1-2~precise1), muffin-common:i386 (2.0.3-20131023003029-precise, 2.0.3-20131105003012-precise), totem-common:i386 (3.0.1-0ubuntu21.1, 3.4.3-0ubuntu1~precise1), libtotem0:i386 (3.0.1-0ubuntu21.1, 3.4.3-0ubuntu1~precise1), rhythmbox-data:i386 (2.96-0ubuntu4.3, 2.97-1ubuntu1~precise1), gir1.2-cinnamondesktop-3.0:i386 (2.0.2-20131025011504-precise, 2.0.3-20131105011505-precise), cinnamon-session:i386 (2.0.1-20131021043004-precise, 2.0.4-20131105043005-precise), rhythmbox-mozilla:i386 (2.96-0ubuntu4.3, 2.97-1ubuntu1~precise1), rhythmbox-plugin-zeitgeist:i386 (2.96-0ubuntu4.3, 2.97-1ubuntu1~precise1), libmuffin0:i386 (2.0.3-20131023003029-precise, 2.0.3-20131105003012-precise), cjs:i386 (2.0.0-20131021020602-precise, 2.0.0-20131105020703-precise), rhythmbox-plugin-cdrecorder:i386 (2.96-0ubuntu4.3, 2.97-1ubuntu1~precise1), cinnamon-common:i386 (2.0.6-20131026040307-precise, 2.0.10-20131105040309-precise), gnome-disk-utility:i386 (3.0.2-2ubuntu7, 3.4.1-0ubuntu1~precise1), nemo-fileroller:i386 (2.0.0-20131021020004-precise, 2.0.0-20131105020003-precise), libnemo-extension1:i386 (2.0.2-20131023010018-precise, 2.0.5-20131105010007-precise), rhythmbox-plugins:i386 (2.96-0ubuntu4.3, 2.97-1ubuntu1~precise1), gimp:i386 (2.8.6-0precise1~ppa, 2.8.8-0precise0~ppa), cinnamon-settings-daemon:i386 (2.0.5-20131026004504-precise, 2.0.6-20131105004505-precise), libgimp2.0:i386 (2.8.6-0precise1~ppa, 2.8.8-0precise0~ppa), gir1.2-rb-3.0:i386 (2.96-0ubuntu4.3, 2.97-1ubuntu1~precise1), wpasupplicant:i386 (0.7.3-6ubuntu2.1, 0.7.3-6ubuntu2.2), libcjs0c:i386 (2.0.0-20131021020602-precise, 2.0.0-20131105020703-precise), nemo-data:i386 (2.0.2-20131023010018-precise, 2.0.5-20131105010007-precise), totem:i386 (3.0.1-0ubuntu21.1, 3.4.3-0ubuntu1~precise1), gimp-data:i386 (2.8.6-0precise1~ppa, 2.8.8-0precise0~ppa), transmission-common:i386 (2.51-0ubuntu1.3, 2.73-0ubuntu1~precise1), cinnamon-translations:i386 (2.0.1-20131021040407-precise, 2.0.1-20131105040807-precise), totem-mozilla:i386 (3.0.1-0ubuntu21.1, 3.4.3-0ubuntu1~precise1), rhythmbox-plugin-magnatune:i386 (2.96-0ubuntu4.3, 2.97-1ubuntu1~precise1), transmission-gtk:i386 (2.51-0ubuntu1.3, 2.73-0ubuntu1~precise1) End-Date: 2013-11-07 17:34:40

  Read the article

• Real Time BI in the Real World

  - by tobin.gilman(at)oracle.com

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman","serif";} Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman","serif"; mso-fareast-font-family:"Times New Roman";} One of my favorite BI offerings from Oracle is a solution called Oracle Real Time Decisions.  Whenever I mention this product in customer meetings, eyes light up.  There are some fascinating examples of customers using it to up-sell, cross-sell, increase customer retention, and reduce risk in real time, with off the charts return on investment. I plan to share some of those stories in a future blog.  In this post however, I want to share some far more common real time analytics use case scenarios that are being addressed with widely deployed Oracle BI and data integration technologies Not all real time BI applications require continuous learning, predictive modeling, and data mining.  Many simply require the ability to integrate, aggregate, and access information that is current (typically within in few minutes or a few seconds).  The use cases are infinite.  A few I've seen: ·         Purchasing agents need to match demand against available inventory ·         Manufacturing planners need to monitor current parts and material against scheduled build plans ·         Airline agents need to match ticket demand against flight schedules, ·         Human resources managers need to track the status of global hiring requisitions against current headcount authorizations...you get the idea. One way of doing this is to run reports or federated queries directly against transactional systems.  That approach can be viable if you only need to access simple data sets on rare occasions.  High volume and complex queries can quickly bog down performance of mission critical transactional systems.  There is an architecturally simple way of solving the problem, and it's being applied by real companies around the world to solve real needs in real time.    Cbeyond is an Atlanta, GA based  provider of voice, data and mobile business applications delivers.  They deliver real time information to its call center agents  as they are interacting with their customers. The data they need resides in production CRM and other transactional systems, but  instead or reporting directly off the those systems, data is first moved to an operational data store (ODS).  Rather than running data intensive, time consuming, and performance degrading batch ETL routines to populate the ODS, Cbeyond uses Oracle Golden Gate software to incrementally capture and move only the changed records from log files of the transactional systems every few minutes.  There is no impact on transactional system performance, and the information needed by call center representatives is up to date.  Oracle Business Intelligence software presents the information to services reps in a rich, visual, and highly interactive format. Avea is similar to Cbeyond.  They are a telecommunications company who integrates billing and customer information in an ODS that is accessed by their call center agents in real time using Oracle Golden Gate and Oracle Business Intelligence.  They've taken it a step further by using the ODS to feed a data warehouse.  The operational data store provides the current information needed by call center agents during "in flight" customer interactions.  The data warehouse is used for more sophisticated analysis of historical data.  For maximum performance, both the ODS and data warehouse run on the Oracle Exadata Database Machine. These are practical illustrations of companies addressing real time reporting and analysis needs using established business intelligence/data warehousing methodologies and tools common to many IT departments.  If real time BI could benefit your organization, you may be already be closer than you thought to having the pieces in place to solving the problem.    Give us a shout if you are interested in learning more or if you have an interesting use or approach to real-time BI.

  Read the article

• #OOW 2012 @PARIS...talking Oracle and Clouds, and Optimized Datacenter

  - by Eric Bezille

  For those of you who want to get most out of Oracle technologies to evolve your IT to the Next Wave, I encourage you to register to the up coming Oracle Optimized Datacenter event that will take place in Paris on November 28th. You will get the opportunity to exchange with Oracle experts and customers having successfully evolve their IT by leveraging Oracle technologies. You will also get the latest news on some of the Oracle systems announcements made during OOW 2012. During this event we will make an update about Oracle and Clouds, from private to public and hybrid models. So in preparing this session, I thought it was a good start to make a status of Cloud Computing in France, and CIO requirements in particular. Starting in 2009 with the first Cloud Camp in Paris, the market has evolved, but the basics are still the same : think hybrid. From Traditional IT to Clouds One size doesn't fit all, and for big companies having already an IT in place, there will be parts eligible to external (public) cloud, and parts that would be required to stay inside the firewalls, so ability to integrate both side is key.  None the less, one of the major impact of Cloud Computing trend on IT, reported by Forrester, is the pressure it makes on CIO to evolve towards the same model that end-users are now used to in their day to day life, where self-service and flexibility are paramount. This is what is driving IT to transform itself toward "a Global Service Provider", or for some as "IT "is" the Business" (see : Gartner Identifies Four Futures for IT and CIO), and for both models toward a Private Cloud Service Provider. In this journey, there is still a big difference between most of existing external Cloud and a firm IT : the number of applications that a CIO has to manage. Most cloud providers today are overly specialized, but at the end of the day, there are really few business processes that rely on only one application. So CIOs has to combine everything together external and internal. And for the internal parts that they will have to make them evolve to a Private Cloud, the scope can be very large. This will often require CIOs to evolve from their traditional approach to more disruptive ones, the time has come to introduce new standards and processes, if they want to succeed. So let's have a look at the different Cloud models, what type of users they are addressing, what value they bring and most importantly what needs to be done by the  Cloud Provider, and what is left over to the user. IaaS, PaaS, SaaS : what's provided and what needs to be done First of all the Cloud Provider will have to provide all the infrastructure needed to deliver the service. And the more value IT will want to provide, the more IT will have to deliver and integrate : from disks to applications. As we can see in the above picture, providing pure IaaS, left a lot to cover for the end-user, that’s why the end-user targeted by this Cloud Service is IT people. If you want to bring more value to developers, you need to provide to them a development platform ready to use, which is what PaaS is standing for, by providing not only the processors power, storage and OS, but also the Database and Middleware platform. SaaS being the last mile of the Cloud, providing an application ready to use by business users, the remaining part for the end-users being configuring and specifying the application for their specific usage. In addition to that, there are common challenges encompassing all type of Cloud Services : Security : covering all aspect, not only of users management but also data flows and data privacy Charge back : measuring what is used and by whom Application management : providing capabilities not only to deploy, but also to upgrade, from OS for IaaS, Database, and Middleware for PaaS, to a full Business Application for SaaS. Scalability : ability to evolve ALL the components of the Cloud Provider stack as needed Availability : ability to cover “always on” requirements Efficiency : providing a infrastructure that leverage shared resources in an efficient way and still comply to SLA (performances, availability, scalability, and ability to evolve) Automation : providing the orchestration of ALL the components in all service life-cycle (deployment, growth & shrink (elasticity), upgrades,...) Management : providing monitoring, configuring and self-service up to the end-users Oracle Strategy and Clouds For CIOs to succeed in their Private Cloud implementation, means that they encompass all those aspects for each component life-cycle that they selected to build their Cloud. That’s where a multi-vendors layered approach comes short in terms of efficiency. That’s the reason why Oracle focus on taking care of all those aspects directly at Engineering level, to truly provide efficient Cloud Services solutions for IaaS, PaaS and SaaS. We are going as far as embedding software functions in hardware (storage, processor level,...) to ensure the best SLA with the highest efficiency. The beauty of it, as we rely on standards, is that the Oracle components that you are running today in-house, are exactly the same that we are using to build Clouds, bringing you flexibility, reversibility and fast path to adoption. With Oracle Engineered Systems (Exadata, Exalogic & SPARC SuperCluster, more specifically, when talking about Cloud), we are delivering all those components hardware and software already engineered together at Oracle factory, with a single pane of glace for the management of ALL the components through Oracle Enterprise Manager, and with high-availability, scalability and ability to evolve by design. To give you a feeling of what does that bring in terms just of implementation project timeline, for example with Oracle SPARC SuperCluster, we have a consistent track of record to have the system plug into existing Datacenter and ready in a week. This includes Oracle Database, OS, virtualization, Database Storage (Exadata Storage Cells in this case), Application Storage, and all network configuration. This strategy enable CIOs to very quickly build Cloud Services, taking out not only the complexity of integrating everything together but also taking out the automation and evolution complexity and cost. I invite you to discuss all those aspect in regards of your particular context face2face on November 28th.

  Read the article

• Windows for IoT, continued

  - by Valter Minute

  Originally posted on: http://geekswithblogs.net/WindowsEmbeddedCookbook/archive/2014/08/05/windows-for-iot-continued.aspxI received many interesting feedbacks on my previous blog post and I tried to find some time to do some additional tests. Bert Kleinschmidt pointed out that pins 2,3 and 10 of the Galileo are connected directly to the SOC, while pin 13, the one used for the sample sketch is controlled via an I2C I/O expander. I changed my code to use pin 2 instead of 13 (just changing the variable assignment at the beginning of the code) and latency was greatly reduced. Now each pulse lasts for 1.44ms, 44% more than the expected time, but ways better that the result we got using pin 13. I also used SetThreadPriority to increase the priority of the thread that was running the sketch to THREAD_PRIORITY_HIGHEST but that didn't change the results. When I was using the I2C-controlled pin I tried the same and the timings got ways worse (increasing more than 10 times) and so I did not commented on that part, wanting to investigate the issua a bit more in detail. It seems that increasing the priority of the application thread impacts negatively the I2C communication. I tried to use also the Linux-based implementation (using a different Galileo board since the one provided by MS seems to use a different firmware) and the results of running the sample blink sketch modified to use pin 2 and blink the led for 1ms are similar to those we got on the same board running Windows. Here the difference between expected time and measured time is worse, getting around 3.2ms instead of 1 (320% compared to 150% using Windows but far from the 100.1% we got with the 8-bit Arduino). Both systems were not under load during the test, maybe loading some applications that use part of the CPU time would make those timings even less reliable, but I think that those numbers are enough to draw some conclusions. It may not be worth running a full OS if what you need is Arduino compatibility. The Arduino UNO is probably the best Arduino you can find to perform this kind of development. The Galileo running the Linux-based stack or running Windows for IoT is targeted to be a platform for "Internet of Things" devices, whatever that means. At the moment I don't see the "I" part of IoT. We have low level interfaces (SPI, I2C, the GPIO pins) that can be used to connect sensors but the support for connectivity is limited and the amount of work required to deliver some data to the cloud (using a secure HTTP request or a message queuing system like APMQS or MQTT) is still big and the rich OS underneath seems to not provide any help doing that.Why should I use sockets and can't access all the high level connectivity features we have on "full" Windows?I know that it's possible to use some third party libraries, try to build them using the Windows For IoT SDK etc. but this means re-inventing the wheel every time and can also lead to some IP concerns if used for products meant to be closed-source. I hope that MS and Intel (and others) will focus less on the "coolness" of running (some) Arduino sketches and more on providing a better platform to people that really want to design devices that leverage internet connectivity and the cloud processing power to deliver better products and services. Providing a reliable set of connectivity services would be a great start. Providing support for .NET would be even better, leaving native code available for hardware access etc. I know that those components may require additional storage and memory etc. So making the OS componentizable (or, at least, provide a way to install additional components) would be a great way to let developers pick the parts of the system they need to develop their solution, knowing that they will integrate well together. I can understand that the Arduino and Raspberry Pi* success may have attracted the attention of marketing departments worldwide and almost any new development board those days is promoted as "XXX response to Arduino" or "YYYY alternative to Raspberry Pi", but this is misleading and prevents companies from focusing on how to deliver good products and how to integrate "IoT" features with their existing offer to provide, at the end, a better product or service to their customers. Marketing is important, but can't decide the key features of a product (the OS) that is going to be used to develop full products for end customers integrating it with hardware and application software. I really like the "hackable" nature of open-source devices and like to see that companies are getting more and more open in releasing information, providing "hackable" devices and supporting developers with documentation, good samples etc. On the other side being able to run a sketch designed for an 8 bit microcontroller on a full-featured application processor may sound cool and an easy upgrade path for people that just experimented with sensors etc. on Arduino but it's not, in my humble opinion, the main path to follow for people who want to deliver real products.   *Shameless self-promotion: if you are looking for a good book in Italian about the Raspberry Pi , try mine: http://www.amazon.it/Raspberry-Pi-alluso-Digital-LifeStyle-ebook/dp/B00GYY3OKO

  Read the article

• Atheros 922 PCI WIFI is disabled in Unity but enabled in terminal - How to get it to work?

  - by zewone

  I am trying to get my PCI Wireless Atheros 922 card to work. It is disabled in Unity: both the network utility and the desktop (see screenshot http://www.amisdurailhalanzy.be/Screenshot%20from%202012-10-25%2013:19:54.png) I tried many different advises on many different forums. Installed 12.10 instead of 12.04, enabled all interfaces... etc. I have read about the aht9 driver... The terminal shows no hw or sw lock for the Atheros card, nevertheless, it is still disabled. Nothing worked so far, the card is still disabled. Any help is much appreciated. Here are more tech details: myuser@adri1:~$ sudo lshw -C network *-network:0 DISABLED description: Wireless interface product: AR922X Wireless Network Adapter vendor: Atheros Communications Inc. physical id: 2 bus info: pci@0000:03:02.0 logical name: wlan1 version: 01 serial: 00:18:e7:cd:68:b1 width: 32 bits clock: 66MHz capabilities: pm bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.5.0-17-generic firmware=N/A latency=168 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:18 memory:d8000000-d800ffff *-network:1 description: Ethernet interface product: VT6105/VT6106S [Rhine-III] vendor: VIA Technologies, Inc. physical id: 6 bus info: pci@0000:03:06.0 logical name: eth0 version: 8b serial: 00:11:09:a3:76:4a size: 10Mbit/s capacity: 100Mbit/s width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=via-rhine driverversion=1.5.0 duplex=half latency=32 link=no maxlatency=8 mingnt=3 multicast=yes port=MII speed=10Mbit/s resources: irq:18 ioport:d300(size=256) memory:d8013000-d80130ff *-network DISABLED description: Wireless interface physical id: 1 bus info: usb@1:8.1 logical name: wlan0 serial: 00:11:09:51:75:36 capabilities: ethernet physical wireless configuration: broadcast=yes driver=rt2500usb driverversion=3.5.0-17-generic firmware=N/A link=no multicast=yes wireless=IEEE 802.11bg myuser@adri1:~$ sudo rfkill list all 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 1: phy1: Wireless LAN Soft blocked: no Hard blocked: yes 2: phy0: Wireless LAN Soft blocked: no Hard blocked: no myuser@adri1:~$ dmesg | grep wlan0 [ 15.114235] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready myuser@adri1:~$ dmesg | egrep 'ath|firm' [ 14.617562] ath: EEPROM regdomain: 0x30 [ 14.617568] ath: EEPROM indicates we should expect a direct regpair map [ 14.617572] ath: Country alpha2 being used: AM [ 14.617575] ath: Regpair used: 0x30 [ 14.637778] ieee80211 phy0: >Selected rate control algorithm 'ath9k_rate_control' [ 14.639410] Registered led device: ath9k-phy0 myuser@adri1:~$ dmesg | grep wlan1 [ 15.119922] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready myuser@adri1:~$ lspci -nn | grep 'Atheros' 03:02.0 Network controller [0280]: Atheros Communications Inc. AR922X Wireless Network Adapter [168c:0029] (rev 01) myuser@adri1:~$ sudo ifconfig eth0 Link encap:Ethernet HWaddr 00:11:09:a3:76:4a inet addr:192.168.2.2 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::211:9ff:fea3:764a/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:5457 errors:0 dropped:0 overruns:0 frame:0 TX packets:2548 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3425684 (3.4 MB) TX bytes:282192 (282.1 KB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:590 errors:0 dropped:0 overruns:0 frame:0 TX packets:590 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:53729 (53.7 KB) TX bytes:53729 (53.7 KB) myuser@adri1:~$ sudo iwconfig wlan0 IEEE 802.11bg ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=off Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:on lo no wireless extensions. eth0 no wireless extensions. wlan1 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=0 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off myuser@adri1:~$ lsmod | grep "ath9k" ath9k 116549 0 mac80211 461161 3 rt2x00usb,rt2x00lib,ath9k ath9k_common 13783 1 ath9k ath9k_hw 376155 2 ath9k,ath9k_common ath 19187 3 ath9k,ath9k_common,ath9k_hw cfg80211 175375 4 rt2x00lib,ath9k,mac80211,ath myuser@adri1:~$ iwlist scan wlan0 Failed to read scan data : Network is down lo Interface doesn't support scanning. eth0 Interface doesn't support scanning. wlan1 Failed to read scan data : Network is down myuser@adri1:~$ lsb_release -d Description: Ubuntu 12.10 myuser@adri1:~$ uname -mr 3.5.0-17-generic i686  Any help much appreciated... Thanks, Philippe 31-10-2012 ... I have some more updates. When I do the following command it does see my Wifi router... So even if it is still disabled... the card seems to work and see the router (ESSID:"5791BC26-CE9C-11D1-97BF-0000F81E") See below: sudo iwlist wlan1 scanning wlan1 Scan completed : Cell 01 - Address: 00:19:70:8F:B0:EA Channel:10 Frequency:2.457 GHz (Channel 10) Quality=51/70 Signal level=-59 dBm Encryption key:on ESSID:"5791BC26-CE9C-11D1-97BF-0000F81E" Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s 9 Mb/s; 12 Mb/s; 18 Mb/s Bit Rates:24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s Mode:Master Extra:tsf=000000025dbf2188 Extra: Last beacon: 108ms ago IE: Unknown: 002035373931424332362D434539432D313144312D393742462D3030303046383145 IE: Unknown: 010882848B960C121824 IE: Unknown: 03010A IE: Unknown: 0706424520010D14 IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : CCMP TKIP Authentication Suites (1) : PSK IE: Unknown: 2A0100 IE: Unknown: 32043048606C IE: Unknown: DD180050F2020101030003A4000027A4000042435E0062322F00 IE: Unknown: DD0900037F01010000FF7F IE: Unknown: DD0A00037F04010000000000

  Read the article

• Remote Workers...We're Not That Bad!

  - by user12601034

  I work from home a lot – my team is located in different cities and countries, my manager is in a different city, and most of our work is done via conference calls, email and collaboration through Oracle Social Network. We’ve figured out how to be effective and involve team members, regardless of where we are all located. When I mention that I work from home, a lot of my friends will laugh, roll their eyes or use their fingers to make quotation marks around “work from home.” Their belief is that I’m sitting at home, eating bon-bons and watching television. The attempts at humor only multiply when they know that my husband also mostly works from home. So, it was with great joy that I read the Lifehacker article Why Remote Workers Are More (Yes, More) Engaged. I’m not going to re-write the article for you, but four highlights from the article include: Proximity breeds complacency –because communicating with employees sitting next to you is so easy, you may not do it well. Absence makes people try harder to connect – because you have to make an effort to connect to your team, you tend to pay better attention when you do connect Leaders of virtual team make better use of tools – when working remotely, you will use technology (many different forms of it) to connect with your team. This daily use of the tools makes you more proficient with those tools Leaders of far-flung teams maximize the time spent together – getting together takes effort, time and money, so leaders tend to filter out distractions when teams do get together. These points made me happy because I’ve seen the same things play out in my team located around the world. And I’m not saying that a virtual team is more effective than a co-located team – but my virtual team doesn’t have the option of filing into a conference room for a face-to-face meeting whenever we want. Instead, we have to figure out how to work effectively without meeting face-to-face. Am I more engaged as a remote worker? I’d like to think that I am. I’ve been on calls with colleagues at 3am – this would never happen if my only option was to be in the office. I can leave my “office” to pick up my kids from school…and I’m willingly back online after kids are in bed to finish up anything I need to. Oracle Social Network lets me use my iPad to engage with my teammates when I’m waiting at music lessons, the doctor’s office or any place else with a network connection. I feel like I’m more connected with my team, and I feel like I’m more connected with my family life. So yes, I am a remote worker, and I am engaged. If you lead a virtual team, I challenge you to increase the ways that you communicate to effectively engage your team. If you are on a virtual team, I challenge you to think about how you might interact with team members to keep both them and yourself engaged in your work. And if you have some great ideas on how to make virtual teams (and workers) effective and engaged, please share those ideas in the comments! Now, if you’ll excuse me, I need to go get a bon-bon...   :) Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

  Read the article

• Seizing the Moment with Mobility

  - by Divya Malik

  Empowering people to work where they want to work is becoming more critical now with the consumerisation of technology. Employees are bringing their own devices to the workplace and expecting to be productive wherever they are. Sales people welcome the ability to run their critical business applications where they can be most effective which is typically on the road and when they are still with the customer. Oracle has invested many years of research in understanding customer's Mobile requirements. “The keys to building the best user experience were building in a lot of flexibility in ways to support sales, and being useful,” said Arin Bhowmick, Director, CRM, for the Applications UX team. “We did that by talking to and analyzing the needs of a lot of people in different roles.” The team studied real-life sales teams. “We wanted to study salespeople in context with their work,” Bhowmick said. “We studied all user types in the CRM world because we wanted to build a user interface and user experience that would cater to sales representatives, marketing managers, sales managers, and more. Not only did we do studies in our labs, but also we did studies in the field and in mobile environments because salespeople are always on the go.” Here is a recent post from Hernan Capdevila, Vice President, Oracle Fusion Apps which was featured on the Oracle Applications Blog.  Mobile devices are forcing a paradigm shift in the workplace – they’re changing the way businesses can do business and the type of cultures they can nurture. As our customers talk about their mobile needs, we hear them saying they want instant-on access to enterprise data so workers can be more effective at their jobs anywhere, anytime. They also are interested in being more cost effective from an IT point of view. The mobile revolution – with the idea of BYOD (bring your own device) – has added an interesting dynamic because previously IT was driving the employee device strategy and ecosystem. That's been turned on its head with the consumerization of IT. Now employees are figuring out how to use their personal devices for work purposes and IT has to figure out how to adapt. Blurring the Lines between Work and Personal Life My vision of where businesses will be five years from now is that our work lives and personal lives will be more interwoven together. In turn, enterprises will have to determine how to make employees’ work lives fit more into the fabric of their personal lives. And personal devices like smartphones are going to drive significant business value because they let us accomplish things very incrementally. I can be sitting on a train or in a taxi and be productive. At the end of any meeting, I can capture ideas and tasks or follow up with people in real time. Mobile devices enable this notion of seizing the moment – capitalizing on opportunities that might otherwise have slipped away because we're not connected. For the industry shapers out there, this is game changing. The lean and agile workforce is definitely the future. This notion of the board sitting down with the executive team to lay out strategic objectives for a three- to five-year plan, bringing in HR to determine how they're going to staff the strategic activities, kicking off the execution, and then revisiting the plan in three to five years to create another three- to five-year plan is yesterday's model. Businesses that continue to approach innovating in that way are in the dinosaur age. Today it's about incremental planning and incremental execution, which requires a lot of cohesion and synthesis within the workforce. There needs to be this interweaving notion within the workforce about how ideas cascade down, how people engage, how they stay connected, and how insights are shared. How to Survive and Thrive in Today’s Marketplace The notion of Facebook isn’t new. We lived it pre-Internet days with America Online and Prodigy – Facebook is just the renaissance of these services in a more viral and pervasive way. And given the trajectory of the consumerization of IT with people bringing their personal tooling to work, the enterprise has no option but to adapt. The sooner that businesses realize this from a top-down point of view the sooner that they will be able to really drive significant innovation and adapt to the marketplace. There are a small number of companies right now (I think it's closer to 20% rather than 80%, but the number is expanding) that are able to really innovate in this incremental marketplace. So from a competitive point of view, there's no choice but to be social and stay connected. By far the majority of users on Facebook and LinkedIn are mobile users – people on iPhones, smartphones, Android phones, and tablets. It's not the couch people, right? It's the on-the-go people – those people at the coffee shops. Usually when you're sitting at your desk on a big desktop computer, typically you have better things to do than to be on Facebook. This is a topic I'm extremely passionate about because I think mobile devices are game changing. Mobility delivers significant value to businesses – it also brings dramatic simplification from a functional point of view and transforms our work life experience. Hernan Capdevila Vice President, Oracle Applications Development

  Read the article

• Centered Content using panelGridLayout

  - by Duncan Mills

  A classic layout conundrum,  which I think pretty much every ADF developer may have faced at some time or other, is that of truly centered (centred) layout. Typically this requirement comes up in relation to say displaying a login type screen or similar. Superficially the  problem seems easy, but as my buddy Eduardo explained when discussing this subject a couple of years ago it's actually a little more complex than you might have thought. If fact, even the "solution" provided in that posting is not perfect and suffers from a several issues (not Eduardo's fault, just limitations of panelStretch!) The top, bottom, end and start facets all need something in them The percentages you apply to the topHeight, startWidth etc. are calculated as part of the whole width.  This means that you have to guestimate the correct percentage based on your typical screen size and the sizing of the centered content. So, at best, you will in fact only get approximate centering, and the more you tune that centering for a particular browser size the more it will fail if the user resizes. You can't attach styles to the panelStretchLayout facets so to provide things like background color or fixed sizing you need to embed another container that you can apply styles to, typically a panelgroupLayout   For reference here's the code to print a simple 100px x 100px red centered square  using the panelStretchLayout solution, approximately tuned to a 1980 x 1080 maximized browser (IDs omitted for brevity): <af:panelStretchLayout startWidth="45%" endWidth="45%"                        topHeight="45%"  bottomHeight="45%" >   <f:facet name="center">     <af:panelGroupLayout inlineStyle="height:100px;width:100px;background-color:red;"                          layout="vertical"/>   </f:facet>   <f:facet name="top">     <af:spacer height="1" width="1"/>   </f:facet>   <f:facet name="bottom">     <af:spacer height="1" width="1"/>   </f:facet>   <f:facet name="start">     <af:spacer height="1" width="1"/>   </f:facet>   <f:facet name="end">     <af:spacer height="1" width="1"/>    </f:facet> </af:panelStretchLayout>  And so to panelGridLayout  So here's the  good news, panelGridLayout makes this really easy and it works without the caveats above.  The key point is that percentages used in the grid definition are evaluated after the fixed sizes are taken into account, so rather than having to guestimate what percentage will "more, or less", center the content you can just say "allocate half of what's left" to the flexible content and you're done. Here's the same example using panelGridLayout: <af:panelGridLayout> <af:gridRow height="50%"/> <af:gridRow height="100px"> <af:gridCell width="50%" /> <af:gridCell width="100px" halign="stretch" valign="stretch"  inlineStyle="background-color:red;"> <af:spacer width="1" height="1"/> </af:gridCell> <af:gridCell width="50%" /> </af:gridRow> <af:gridRow height="50%"/> </af:panelGridLayout>  So you can see that the amount of markup is somewhat smaller (as is, I should mention, the generated DOM structure in the browser), mainly because we don't need to introduce artificial components to ensure that facets are actually observed in the final result.  But the key thing here is that the centering is no longer approximate and it will work as expected as the user resizes the browser screen.  By far this is a more satisfactory solution and although it's only a simple example, it will hopefully open your eyes to the potential of panelGridLayout as your number one, go-to layout container. Just a reminder though, right now, panelGridLayout is only available in 11.1.2.2 and above.

  Read the article

• Thread.Interrupt Is Evil

  - by Alois Kraus

  Recently I have found an interesting issue with Thread.Interrupt during application shutdown. Some application was crashing once a week and we had not really a clue what was the issue. Since it happened not very often it was left as is until we have got some memory dumps during the crash. A memory dump usually means WindDbg which I really like to use (I know I am one of the very few fans of it).  After a quick analysis I did find that the main thread already had exited and the thread with the crash was stuck in a Monitor.Wait. Strange Indeed. Running the application a few thousand times under the debugger would potentially not have shown me what the reason was so I decided to what I call constructive debugging. I did create a simple Console application project and try to simulate the exact circumstances when the crash did happen from the information I have via memory dump and source code reading. The thread that was  crashing was actually MS code from an old version of the Microsoft Caching Application Block. From reading the code I could conclude that the main thread did call the Dispose method on the CacheManger class which did call Thread.Interrupt on the cache scavenger thread which was just waiting for work to do. My first version of the repro looked like this   static void Main(string[] args) { Thread t = new Thread(ThreadFunc) { IsBackground = true, Name = "Test Thread" }; t.Start(); Console.WriteLine("Interrupt Thread"); t.Interrupt(); } static void ThreadFunc() { while (true) { object value = Dequeue(); // block until unblocked or awaken via ThreadInterruptedException } } static object WaitObject = new object(); static object Dequeue() { object lret = "got value"; try { lock (WaitObject) { } } catch (ThreadInterruptedException) { Console.WriteLine("Got ThreadInterruptException"); lret = null; } return lret; } I do start a background thread and call Thread.Interrupt on it and then directly let the application terminate. The thread in the meantime does plenty of Monitor.Enter/Leave calls to simulate work on it. This first version did not crash. So I need to dig deeper. From the memory dump I did know that the finalizer thread was doing just some critical finalizers which were closing file handles. Ok lets add some long running finalizers to the sample. class FinalizableObject : CriticalFinalizerObject { ~FinalizableObject() { Console.WriteLine("Hi we are waiting to finalize now and block the finalizer thread for 5s."); Thread.Sleep(5000); } } class Program { static void Main(string[] args) { FinalizableObject fin = new FinalizableObject(); Thread t = new Thread(ThreadFunc) { IsBackground = true, Name = "Test Thread" }; t.Start(); Console.WriteLine("Interrupt Thread"); t.Interrupt(); GC.KeepAlive(fin); // prevent finalizing it too early // After leaving main the other thread is woken up via Thread.Abort // while we are finalizing. This causes a stackoverflow in the CLR ThreadAbortException handling at this time. } With this changed Main method and a blocking critical finalizer I did get my crash just like the real application. The funny thing is that this is actually a CLR bug. When the main method is left the CLR does suspend all threads except the finalizer thread and declares all objects as garbage. After the normal finalizers were called the critical finalizers are executed to e.g. free OS handles (usually). Remember that I did call Thread.Interrupt as one of the last methods in the Main method. The Interrupt method is actually asynchronous and does wake a thread up and throws a ThreadInterruptedException only once unlike Thread.Abort which does rethrow the exception when an exception handling clause is left. It seems that the CLR does not expect that a frozen thread does wake up again while the critical finalizers are executed. While trying to raise a ThreadInterrupedException the CLR goes down with an stack overflow. Ups not so nice. Why has this nobody noticed for years is my next question. As it turned out this error does only happen on the CLR for .NET 4.0 (x86 and x64). It does not show up in earlier or later versions of the CLR. I have reported this issue on connect here but so far it was not confirmed as a CLR bug. But I would be surprised if my console application was to blame for a stack overflow in my test thread in a Monitor.Wait call. What is the moral of this story? Thread.Abort is evil but Thread.Interrupt is too. It is so evil that even the CLR of .NET 4.0 contains a race condition during the CLR shutdown. When the CLR gurus can get it wrong the chances are high that you get it wrong too when you use this constructs. If you do not believe me see what Patrick Smacchia does blog about Thread.Abort and List.Sort. Not only the CLR creators can get it wrong. The BCL writers do sometimes have a hard time with correct exception handling as well. If you do tell me that you use Thread.Abort frequently and never had problems with it I do suspect that you do not have looked deep enough into your application to find such sporadic errors.

  Read the article

• Easiest, most fun way to program 2D games? Flash? XNA? Some other engine?

  - by Maxi

  Hi, this is a post detailing my search for the most enjoyable way for a hobbyist game programmer to sweeten his free time with making a game. My requirements: I looked at Flash first, I made a couple of small games but I'm doubtful of the performance. I would like to make a fairly large strategy game, with several hundred units fighting simultaneously, explosions and animations included. Also zoomable maps. I saw that Adobe has a new 3D API for Flash, but I don't know if that improves 2D performance aswell, I couldn't find anything related to that question on their MAX10 sessions. Would you say that Flash is a good technology for making large 2D games easily? I really like Actionscript, and I love how easy everything is in Flash. There are several engines available which make it even easier. I just do this for fun, and it would be even better if there were proper animation/particle editors available and if the engine I were to use, would be available for multiple platforms. (so more people can play my game once finished). I'd like to have it available on many mobile platforms aswell. (because I love touch input for some reason) I do know the XNA framework pretty well, but there are no good engines available for it, and it will only run on Windows, which is a huge turn off. Even bigger is, that you need to install the XNA redistributable each time you want to give the game to someone. If I use XNA, I would have to make all the tools myself, and I'd probably have to make them with WPF. (I'd love to make tools with Adobe AIR, but unfortunately the API's for image manipulation etc. are far worse in Flash, than they are in XNA/WPF.) Now, I'm aware that I could make my own engine that supports each of those platforms, but quite frankly, that would be too much work plowing through APIs. After all, I want to make a game, not an engine. So the question becomes: Is there maybe a cross platform (free or free to develop?) engine available that I could use for 2D development? I prefer: C#, Actionscript. I don't mind using c++ if the toolset is above average, but I highly doubt that there is something out there like that. Please prove me wrong :) So summary: I'd like to use Flash, but I don't know if it scales well enough. I'm not a scripter, I want some real APIs that I can work with inside a proper IDE. Just for information, I looked at several alternatives, I'm actually looking for a long time already. You'd help me a lot to make a decision finally. Feature-wise the Flatredball engine would be ideal. But I tried their tools, and quite frankly, they are horrible. Absolutely unusable, I'd need to make my own for sure. I didn't look at their API, but if their tools are so bad, I'm not inclined to look further. Unity3D. This one is quite nice, but I really don't need 3D, and it is quite ...a lot of work to learn. I also don't like that it is so expensive to use for different platforms and that I can only code for it through scripting. You have to buy each platform separately. The editor usability is average, the product overall is good enough for most purposes, but learning it myself would be overkill. Shiva 3D. It looks good enough, but again: I don't really need 3D. The editor usability is a little worse than Unity3D in my opinion and it wasn't clear to me how to start programming. I think it requires C++ for coding, so that's a negative too. I want to have fun, and c# is fun ;) SDL. Quite frankly, I'd still need to port to all those different SDL implementations. And I don't like OpenGL style programming, it's just plain ugly. And it needs c++, I know that there might be some wrappers available, but I don't like to use wrappers, because... Irrlicht. A lot of features, but support seems to be low and it is aimed at enthusiasts. C# bindings get dropped repeatedly. I'm not an engine enthusiast, I just want to make a game. I don't see this happening with Irrlicht. Ogre3D. Way too much work, it's just a graphics engine. Also no multiple platform support and c++. Torque2D. Costs something to use, and I didn't hear a lot of good things about support and documentation. Also costs extra for each platform.

  Read the article

< Previous Page | 582 583 584 585 586 587 588 589 590 591 592 593  | Next Page >