Search Results

Search found 65997 results on 2640 pages for 'custom post type'.

Page 587/2640 | < Previous Page | 583 584 585 586 587 588 589 590 591 592 593 594  | Next Page >

• WRTU54G-TM T-Mobile@Home router with 3rd party firmware

  - by dlamblin

  I've been doing a lot of reading online about the Linksys WRTU54G-TM router model that I now own. It seems getting a custom firmware onto it is not a problem. But no one is talking about retaining the Voip features (yet). So far they're all disappointed that it's not a SIP machine and used GSM over IPSec. Personally I don't care about using it with non-t-mobile. If I take the original firmware, shouldn't I be able to extract it, and it's SquashFS image, and then move all of the t-mobile specific binaries for enabling the calling features over to a custom firmware installation (maybe OpenWRT)? You might ask why, and the reason is, that if I do this I could retain my calling features, which I do want, and ssh to the router and use it to run additional software, as any OpenWRT router could do. Does anyone know if this can be done, and how the firmware's binaries could be gotten at and installed correctly?

  Read the article

• Can't figure out error in Cisco ASA log "regular translation creation failed for icmp ..."

  - by Martijn Heemels

  Every few seconds our new Cisco ASA 5505 firewall is logging errors that I can't figure out with my limited Cisco experience. Severity Date Time Syslog ID Source IP Destination IP Description 3 Mar 25 2010 17:21:14 305006 8.8.8.8 regular translation creation failed for icmp src inside:10.10.0.200 dst outside:8.8.8.8 (type 3, code 3) 3 Mar 25 2010 17:18:37 305006 8.8.4.4 regular translation creation failed for icmp src inside:10.10.0.200 dst outside:8.8.4.4 (type 3, code 3) The logged inside IP is our internal DNS resolver, and the outside IP's are Google's public DNS servers. ICMP Type 3 Code 3 means "Port Unreachable" Our "outside" interface has a fixed IP and our "inside" interface is in the 10.10.0.0/16 subnet. The 'Inspect DNS' Service Policy is enabled, with the preset DNS inspection map. Furthermore there's an ACL that allows all inbound ICMP on the "outside" interface. I've spent hours trying to figure this one out, so any and all advice is welcome!

  Read the article

• Installing esx 3.5 on hpblade 460c G7

  - by stillStudent

  I was trying to install ESX 3.5 on hp blade 460c but it fails with error no 'network adapter is detected'. Anybody has work around for this. I also tried to install ESX 4.1, it also had the same problem but in case of 4.1 there is support to add your custom driver while installing. So I added NIC drivers and installation completed successfully. ESX 3.5 installtion does not support adding custom drivers while installing. I can't use ESX 4.1 because it does not support 'license server' configuration and only asks for license file(key). I do not have license keys, I only have vmware license server. That is the reason I have to be with ESX 3.5.

  Read the article

• MS Office 2013 and Asian languages

  - by atamur

  I've got a Win7 computer with Office 2013 installed. System language is German. When switching input language to Thai I can type in the system dialog boxes (like start buttno app finder), but can't type in MS Word (pressing the keys on the keyboard does nothing on the screen, the cursor doesn't move). The weirdest thing here is: if I use numeric keypad and type any number after that the keyboard starts working in Word for a few characters. Japanese and Nepal input languages work fine. Does anyone know any way to troubleshoot? Thank you!

  Read the article

• HP D2D 4312 Bacula configuration

  - by krisdigitx

  I have configured 5 libraries on the HP D2D system Discovery on the Bacula server shows only the last library and not all libraries. Why? [root@server bacula]# iscsiadm --mode discovery --type sendtargets --portal 10.66.59.114 10.66.59.114:3260,1 iqn.1986-03.com.hp:storage.d2dbs.czj2020vvy.50014380075dca5e.library12.drive1 10.66.59.114:3260,1 iqn.1986-03.com.hp:storage.d2dbs.czj2020vvy.50014380075dcaf2.library12.robotics I can query it fine using... [root@server bacula]# mtx -f /dev/sg2 inquiry Product Type: Tape Drive Vendor ID: 'HP ' Product ID: 'Ultrium 5-SCSI ' Revision: 'ED51' Attached Changer API: No [root@bray bacula]# mtx -f /dev/sg3 inquiry Product Type: Medium Changer Vendor ID: 'HP ' Product ID: 'MSL G3 Series ' Revision: 'EL41' Attached Changer API: No [root@server bacula]# mtx -f /dev/sg3 status Storage Changer /dev/sg3:1 Drives, 97 Slots ( 1 Import/Export ) Data Transfer Element 0:Empty Storage Element 1:Full :VolumeTag=50507F82 Storage Element 2:Full :VolumeTag=50507F83 Storage Element 3:Full :VolumeTag=50507F84 Storage Element 4:Full :VolumeTag=50507F85 Storage Element 5:Full :VolumeTag=50507F86 Storage Element 6:Full :VolumeTag=50507F87 Storage Element 7:Full :VolumeTag=50507F88 Does anyone have any good documentation for implementing Bacula with an HP D2D tape drive for server backups, and how to allocate libraries?

  Read the article

• Virtual audio driver for Windows?

  - by Ognjen

  Is there any (possibly free or open-source) virtual WDM audio driver for Windows, with additional processing plugins, which would add one more layer between windows applications and actual sound card's WDM audio driver, allowing to: Add software DSPs to general audio output. I would like to be able to use custom effects, like compressor, or stereophonic-to-binaural converter for listening online's streaming media on headphones, etc. Connect its output to some custom buffer instead of the sound card. For example, to be able to record audio, or to send audio via wireless connection to some other wireless source? Virtual audio driver was just my idea how to solve these issues - if you know other way, please share your knowledge. I need this for Windows 7 and/or Windows XP.

  Read the article

• Session Timeout Page Vs Login Page on ISA Server Timeout

  - by _rick_schott

  Is it possible to show a different page(custom timeout page vs Login page) on Session Timeout using an ISA Server?

  Read the article

• Setup LAN to serve webpages and voip and access to the web site from inside LAN with domain name

  - by Mauricio Arias

  I'd like to know if it will work: I have my domain and I´m serving a webpage in a nginx to the internet, but if I type my domain in my laptop inside LAN I access to my modem/router configuration, I cannot access to the web server unless I type the IP address. I would like to add a Bind server after the modem/router - (port forward, ports 80 and 5060), if the request is www.mydomain.com bind should resolve the nginx IP address and serve it, and if it is a voip request should address to the voip server and if I'd like to access to the website from inside LAN I'd like to type mydomain.com. Could I do it with this configuration? Do I need something else? Thanks in advace!

  Read the article

• Corporate Wiki Organization - Technical Documentation

  - by Dave Jarvis

  Corporations have documents describing various aspects of their technical systems, including: Custom Applications Custom Development Frameworks Third Party Applications Accounting Bug Tracking Network Management How To Guides User Manuals Web Browsers Software Tools Development IDEs Graphics GIMP xv Text Editing File Transfer ncFTP WinSCP Hardware Servers Web Database Exchange File Network Devices Printers Drawings If you had to use a Wiki to manage the documentation, what other items would you add to the list, and how would you organize it? (For example, would Software Tools make more sense under Third Party Applications?) A few constraints: The structure should not go beyond three levels deep. Avoid the word "and" in favour of two different categories. Keep the structure general: it should appy as broadly as possible. Target audience is primarily technical, but could be visible by anyone.

  Read the article

• Dreamweaver not loading due to workspace file problem

  - by Lynda

  I went to launch Dreamweaver CS 5.5 and this message popped up: XML parsing fatal error: Invalid document structure, line 1, file C:\Documents...(file path)...Workspace\My Workspace.xml It was followed by The following panel layout is missing or could not be read: C:...My Workspace.xml The application will not have a correct layout. Please load one from WindowsWorkspace After that, Dreamweaver acted as if it was going to load, but never did. When I tried to close the program, it crashed. I followed the file path and I saw two files: My Workspace.xml 0kb and My Workspace 5kb. The second one has an unknown file type. I deleted the first file and renamed the unknown file type to My Workspace.xml; everything worked fine after that point. Why did Dreamweaver do this? This has happened several times, but I have not changed anything that should affect that file type.

  Read the article

• Alpha plugin in GStreamer not working

  - by Miguel Escriva

  Hi! I'm trying to compose two videos, and I'm using the alpha plug-in to make the white color transparent. To test the alpha plug-in I'm creating the pipeline with gst-launch. The first test I done was: gst-launch videotestsrc pattern=smpte75 \ ! alpha method=custom target-r=255 target-g=255 target-b=255 angle=10 \ ! videomixer name=mixer ! ffmpegcolorspace ! autovideosink \ videotestsrc pattern=snow ! mixer. and it works great! Then I created two videos with those lines: gst-launch videotestsrc pattern=snow ! ffmpegcolorspace ! theoraenc ! oggmux ! filesink location=snow.ogv gst-launch videotestsrc pattern=smpte75 ! ffmpegcolorspace ! theoraenc ! oggmux ! filesink location=bars75.ogv And changed the videotestsrc to a filesrc and it continues working gst-launch filesrc location=bars75.ogv ! decodebin2 \ ! alpha method=custom target-r=255 target-g=255 target-b=255 angle=10 \ ! videomixer name=mixer ! ffmpegcolorspace ! autovideosink \ filesrc location=snow.ogv ! decodebin2 ! alpha ! mixer. But, when I use the ideo I want to compose, I'm not able to make the white color transparent gst-launch filesrc location=video.ogv ! decodebin2 \ ! alpha method=custom target-r=255 target-g=255 target-b=255 angle=10 \ ! videomixer name=mixer ! ffmpegcolorspace ! autovideosink \ filesrc location=snow.ogv ! decodebin2 ! alpha ! mixer. Can you help me? Any idea what is happening? I'm using GStreamer 0.10.28 You can download the test videos from here: http://polimedia.upv.es/pub/gst/gst.zip Thanks in advance, Miguel Escriva

  Read the article

• Useful scripts for Sikuli

  - by Ivo Flipse

  Thanks to Lifehacker I came across Sikuli which is described as: Sikuli is a visual technology to search and automate graphical user interfaces (GUI) using images (screenshots). The first release of Sikuli contains Sikuli Script, a visual scripting API for Jython, and Sikuli IDE, an integrated development environment for writing visual scripts with screenshots easily. Sikuli Script automates anything you see on the screen without internal API's support. You can programmatically control a web page, a desktop application running on Windows/Linux/Mac OS X, or even an iphone application running in an emulator. As this looks very promising, perhaps complementary to AutoHotKey I'm curious what scripts you guys will come up with. Especially since this program is portable and could solve "simple" Super User problems. Example script from their documentation: setThrowException(True) setAutoWaitTimeout(10000) switchApp("System Preferences.app") click() click() click() click() wait() type("192.168.0.1\t") type("255.255.255.0\t") type("192.168.0.254\t") click()

  Read the article

• Wyse Z Class Thin Client (WES7) Image Deployment

  - by nsr81

  We are currently working on deploying a few Wyse WES7 thin clients (Z Class, exact model escapes me at the moment). We have WDM setup, and are able to see new clients show up, interact with them, pull/push images. Our current workflow is something like this: Unpack & boot up the device Disable Windows Firewall, reboot Device shows up in WDM Publish our custom image to the new device. My question is whether or not there is a way I can bypass step 2, and put my image on the client right out of the box. Either using PXE or USB boot disk, such that I can boot into some sort of menu and tell the client to pull a particular image from the WDM server. With HP thin clients, we have a rule setup which detects new clients on the network and pushes our custom image to them first time they show up. I haven't been able to figure it out with Wyse.

  Read the article

• Printer Management in AD Domain

  - by Untalented

  Hello, I normally push out all my printers via group policy preferences. However, the new copy machines I have are using some stranger drivers and I can not install x64/x86 drivers on the same machine for my clients to pull drivers from. So now I have two machines setup with the printer so they can pull drivers. Ontop of this there is specific driver configuration settings such as requiring the user to enter an access code to print set. Once the printer is installed via GPP, it puts everything to the default such as color mode, and other custom settings we like. I considered just using a Windows Print Server for this, but I do not know a way to push/delete these from clients like I can with GPP. Does anyone know how I can have a GPP copy the custom configuration I have set in the driver or have any recommendations?

  Read the article

• Set Error-Pages for all Applications in Tomcat

  - by user38511

  I'm trying to set up custom error pages in tomcat 6, because I don't want the default ones to show up. My error pages are static html, no jsp or anything dynamic. I know how to do this through the web.xml in each application but I'd prefere to setup the error pages only once for the entire server. I tried to add the following fragment to the global web.xml (in conf), but no matter what I add under location, it does not show. <error-page> <error-code>404</error-code> <location>/404.html</location> </error-page> What do I need to do to gobally define custom error pages? Thanks!

  Read the article

• Cannot install .NET Framework 4.0 on Windows XP SP3

  - by Bob

  I'm using Windows XP SP3 logged in as the administrator. I had RAID Mirroring running. The motherboard broke earlier in the year. When I got a new battery I did not resync. I just use the disks as two separate disks. I searched Google for the errors but I didn't find anything detailed enough. The following Microsoft components are in Add/Remove programs: .NET Framework 1.1 .NET Framework 2.0 Service Pack 2 .NET Framework 3.0 Service Pack 2 .NET Framework 3.5 SP1 Microsoft Compression Client Pack 1.0 for Windows XP Microsoft Office Enterprise 2007 Microsoft Silverlight Microsoft USB Flash Driver Manager Micrsoft User-mode Driver Framework Feature Pack 1.0 Microsoft Visual C++ 2005 ATL Update KB 973923 x86 8.050727.4053 Microsoft Visual C++ 2005 Redistributable This is the installation log: Exists: evaluating... [10/21/2011, 22:17:14]MsiGetProductInfo with product code {3C3901C5-3455-3E0A-A214-0B093A5070A6} found no matches [10/21/2011, 22:17:14] Exists evaluated to false [10/21/2011, 22:15:50]calling PerformAction on an installing performer [10/21/2011, 22:15:50] Action: Performing actions on all Items... [10/21/2011, 22:15:50]Wait for Item (clr_optimization_v2.0.50727_32) to be available [10/21/2011, 22:15:50]clr_optimization_v2.0.50727_32 is now available to install [10/21/2011, 22:15:50]Creating new Performer for ServiceControl item [10/21/2011, 22:15:50] Action: ServiceControl - Stop clr_optimization_v2.0.50727_32... [10/21/2011, 22:15:50]ServiceControl operation succeeded! [10/21/2011, 22:15:50] Action complete [10/21/2011, 22:15:50]Error 0 is mapped to Custom Error: [10/21/2011, 22:15:50]Wait for Item (Windows6.0-KB956250-v6001-x86.msu) to be available [10/21/2011, 22:15:51]Windows6.0-KB956250-v6001-x86.msu is now available to install [10/21/2011, 22:15:51]Created new DoNothingPerformer for File item [10/21/2011, 22:15:51]No CustomError defined for this item. [10/21/2011, 22:15:51]Wait for Item (Windows6.1-KB958488-v6001-x86.msu) to be available [10/21/2011, 22:15:51]Windows6.1-KB958488-v6001-x86.msu is now available to install [10/21/2011, 22:15:51]Created new DoNothingPerformer for File item [10/21/2011, 22:15:51]No CustomError defined for this item. [10/21/2011, 22:15:51]Wait for Item (netfx_Core.mzz) to be available [10/21/2011, 22:15:52]netfx_Core.mzz is now available to install [10/21/2011, 22:15:52]Created new DoNothingPerformer for File item [10/21/2011, 22:15:52]No CustomError defined for this item. [10/21/2011, 22:15:52]Wait for Item (netfx_Core_x86.msi) to be available [10/21/2011, 22:15:52]netfx_Core_x86.msi is now available to install [10/21/2011, 22:15:52]Creating new Performer for MSI item [10/21/2011, 22:15:52] Action: Performing Action on MSI at F:\DOCUME~1\Owner\LOCALS~1\Temp\Microsoft .NET Framework 4 Client Profile Setup_4.0.30319\netfx_Core_x86.msi... [10/21/2011, 22:15:52]Log File F:\DOCUME~1\Owner\LOCALS~1\Temp\Microsoft .NET Framework 4 Client Profile Setup_20111021_221545515-MSI_netfx_Core_x86.msi.txt does not yet exist but may do at Watson upload time [10/21/2011, 22:15:52]Calling MsiInstallProduct(F:\DOCUME~1\Owner\LOCALS~1\Temp\Microsoft .NET Framework 4 Client Profile Setup_4.0.30319\netfx_Core_x86.msi, EXTUI=1 [10/21/2011, 22:17:14]MSI (F:\DOCUME~1\Owner\LOCALS~1\Temp\Microsoft .NET Framework 4 Client Profile Setup_4.0.30319\netfx_Core_x86.msi) Installation failed. Msi Log: Microsoft .NET Framework 4 Client Profile Setup_20111021_221545515-MSI_netfx_Core_x86.msi.txt [10/21/2011, 22:17:14]PerformOperation returned 1603 (translates to HRESULT = 0x80070643) [10/21/2011, 22:17:14] Action complete [10/21/2011, 22:17:14]OnFailureBehavior for this item is to Rollback. [10/21/2011, 22:17:14] Action: Performing actions on all Items... [10/21/2011, 22:17:14] Action complete [10/21/2011, 22:17:14] Action complete [10/21/2011, 22:17:14]Final Result: Installation failed with error code: (0x80070643), "Fatal error during installation. " (Elapsed time: 0 00:01:29). [10/21/2011, 22:17:41]WM_ACTIVATEAPP: Focus stealer's windows WAS visible, NOT taking back focus SECOND LOG REQUESTED BELOW: MSI (s) (6C:EC) [22:17:13:828]: Invoking remote custom action. DLL: F:\WINDOWS\Installer\MSIBB4.tmp, Entrypoint: NgenUpdateHighestVersionRollback MSI (s) (6C:64) [22:17:13:984]: Executing op: ActionStart(Name=CA_NgenRemoveNicPFROs_I_DEF_x86.3643236F_FC70_11D3_A536_0090278A1BB8,,) MSI (s) (6C:64) [22:17:13:984]: Executing op: ActionStart(Name=CA_NgenRemoveNicPFROs_I_RB_x86.3643236F_FC70_11D3_A536_0090278A1BB8,,) MSI (s) (6C:64) [22:17:13:984]: Executing op: CustomActionRollback(Action=CA_NgenRemoveNicPFROs_I_RB_x86.3643236F_FC70_11D3_A536_0090278A1BB8,ActionType=17729,Source=BinaryData,Target=NgenRemoveNicPFROs,) MSI (s) (6C:AC) [22:17:13:984]: Invoking remote custom action. DLL: F:\WINDOWS\Installer\MSIBB5.tmp, Entrypoint: NgenRemoveNicPFROs MSI (s) (6C:64) [22:17:14:000]: Executing op: End(Checksum=0,ProgressTotalHDWord=0,ProgressTotalLDWord=0) MSI (s) (6C:64) [22:17:14:000]: Error in rollback skipped. Return: 5 MSI (s) (6C:64) [22:17:14:015]: No System Restore sequence number for this installation. MSI (s) (6C:64) [22:17:14:015]: Unlocking Server MSI (s) (6C:64) [22:17:14:015]: PROPERTY CHANGE: Deleting UpdateStarted property. Its current value is '1'. MSI (s) (6C:64) [22:17:14:031]: Note: 1: 1708 MSI (s) (6C:64) [22:17:14:031]: Product: Microsoft .NET Framework 4 Client Profile -- Installation failed. MSI (s) (6C:64) [22:17:14:078]: Cleaning up uninstalled install packages, if any exist MSI (s) (6C:64) [22:17:14:078]: MainEngineThread is returning 1603 MSI (s) (6C:EC) [22:17:14:171]: Destroying RemoteAPI object. MSI (s) (6C:9C) [22:17:14:171]: Custom Action Manager thread ending. MSI (c) (F4:C4) [22:17:14:203]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1 MSI (c) (F4:C4) [22:17:14:203]: MainEngineThread is returning 1603 === Verbose logging stopped: 10/21/2011 22:17:14 ===

  Read the article

• How can I expire non-active sessions on my Netscreen SSG140?

  - by David Mackintosh

  I have a Juniper Netscreen SSG-140. While experimenting with a VoIP service, I defined a custom policy that was to be used to permit the possible ports in use to be sent back to the VoIP server from systems connecting across the internet. Because I'd had problems in the past with VoIP systems getting broken when their UDP sessions were expired out faster than their keep-alives were generated, I set the timeout on this custom service to be 'never'. After much experimentation, I happened to notice that my session count on the firewall has grown from a couple thousand to over 36000. After discussion with the VoIP "expert", I set the timeout to be 30 minutes; however, all the sessions set up during the experimentation process are still there, more than 3 days later. Is there a way I can force these old sessions to get expired and removed from the session table, or am I looking at resetting my firewall? (Both firewalls, actually -- they are in a cluster.)

  Read the article

• Windows XP: GNU find.exe moved my files and now they're lost

  - by user2001487

  I used a series of GNU find.exe commands to move media files to the current folder. Explorer show that the folders and files still exist in their original location but properties show zero size and files. I performed a chkdisk and that didnt help. Any ideas how to recover these files? Here are the commands from my bat file. find.exe . -mindepth 1 -name "*.mkv" -type d -exec mv {} {}.tmp ; find.exe . -mindepth 2 -type f -exec mv {} . ; find.exe . -mindepth 1 -type d -exec rmdir {} ; http://i.stack.imgur.com/Eiq2y.jpg http://i.stack.imgur.com/E1wSN.jpg

  Read the article

• Redirect URL using Mac OS X Server Lion

  - by pheedsta

  I have just set up a Mac Mini with OS X Lion Server to host my own website. I have registered multiple domain names, but I would like the user to be automatically redirected to my main domain name if they type in one of the others (i.e. if the user types in www.myotherdomain.com the URL will be forwarded instantly to www.mymaindomain.com). In the Web settings of Server.app, you can easily add additional domains (which works) but it does not change the URL in the browser to www.mymaindomain.com. It keeps www.myotherdomain.com whilst still displaying the correct pages. Does the redirects or alias options do what I want? I can't seem to work out how to use them (there seems to be no documentation that I can find). In Redirects, you need to enter: 'Redirect Type' (Exact Match or Regular Expression) 'Redirect Path' 'Destination URL' 'Redirect Status' (Original was permanently moved, etc) In Alias, you need to enter: 'Alias Type' (Exact Match or Regular Expression) 'Alias Path' 'Destination Folder' Any help would be great.

  Read the article

• Setup NTPD in Ubuntu to sync Windows AD

  - by David

  I am setting up my Ubuntu 10.0.4 server to sync clock with a Windows 2008 AD. As none of the "remote" has a "*" in front (worst it had a blank space in front), does it mean no time sync source is selected? The offset just keep increasing. I tried ntpdate to the same server it worked OK. remote refid st t when poll reach delay offset jitter ============================================================================== 172.18.133.201 .LOCL. 1 u 38 64 377 0.827 277.677 58.375 Any help to fix this? Here is my ntp.conf (with all comments removed) driftfile /var/lib/ntp/ntp.drift statistics loopstats peerstats clockstats filegen loopstats file loopstats type day enable filegen peerstats file peerstats type day enable filegen clockstats file clockstats type day enable restrict -4 default kod notrap nomodify nopeer noquery restrict -6 default kod notrap nomodify nopeer noquery restrict 127.0.0.1 restrict ::1 server 172.18.133.201 iburst

  Read the article

• Redirect users to internal webpage on first visit

  - by Sihan Zheng

  I have a lan of maybe 20 - 30 computers, and a Windows server 2003 server on hand (I can also run any x86 Linux distro). What I am trying to do, is to redirect users to a webserver inside the LAN the first time they visit certain domains. For example, the first time a user visits "google.com", they will be redirected to 192.168.1.2 (a webserver, where they will be shown a custom webpage), attempts after that will go to google. Pretty much what I am trying to do, is to provide a captive server like service, showing people a custom webpage the first time they try to access certain websites (but not others). I'm pretty flexable on how this can be done, as long as it works. Can you guys give me an idea on how to approach this problem? I am looking for (hopefully) a free solutions. Thanks

  Read the article

• ubuntu automount: only mounting drives as root?

  - by glisignoli

  I'm sharing the /mount dir with smb so users on my network can access use drives added to my linux box. Users are able to read files but not write, modify or delete files or directories. I'm using ubuntu 10.04 server edition with halevt installed for usb auto mounting. Afaik halevt is automounting the drives to /media/ but the drives are showing up as: drwxrwxr-x 1 root root 20480 2010-12-29 20:40 disk drwxrwxr-x 1 root root 24576 2010-12-21 17:20 Sparta mount gives me: /dev/sda1 on /boot type ext2 (rw) /dev/sdb1 on /media/disk type fuseblk (rw,nosuid,nodev,sync,allow_other,blksize=4096,default_permissions) /dev/sdc1 on /media/Sparta type fuseblk (rw,nosuid,nodev,sync,allow_other,blksize=4096,default_permissions) When I umount the drives, the folders /media/disk and /media/Sparta are both removed. I tried changing the permissions with chown to nobody:nogroup but it doesn't work (which I assume is because they are ntfs drives).

  Read the article

• Syntax for find on Mac OS X

  - by hekevintran

  I have a project directory that contains source code and subdirectories of source code. I want to use the Unix program find to search recursively for the names of files of certain extensions. The versions of find on Linux and Mac OS X behave differently. # Works in Linux find . -type f -regex ".*\.\(py\|html\)$" # Neither of these works in Mac OS X find . -type f -regex ".*\.\(py\|html\)$" find . -type f -regex ".*\.(py|html)$" How do I write this command so that it will run on Mac OS X (and hopefully on Linux too)?

  Read the article

• Is there a Windows or Linux equivalent of Soulver calculator application?

  - by Shevek

  I've just been shown a brilliant calculator app called Soulver which is only available on Mac OS X Maths on a Mac as it should be Soulver is a new kind of calculator application which uses a simple yet powerful word-processor style interface instead of the traditional "button" approach to doing math. Main Features No equals button - Soulver instantly calculates as you type. Multiple lines - Soulver lets you do math over multiple lines and edit previous expressions. Flexible to words - Soulver doesn't mind if you include words or labels between numbers. Basic functions - Soulver includes every standard calculator function, like sin(), cos() & tan() Clever English functions - Soulver includes some "English" math functions. For instance you can type "10% off $200" and get $180 Floating palettes - Soulver's answer & stats palettes will give you conversions and statistics on your work as your type Save your work - like a word processor, Soulver allows you to save and reopen your work This is a fantastic concept and I would really like to find it's equivalent for Windows and/or Linux. Any suggestions?

  Read the article

• Understanding Windows 8 Recovery options

  - by stuffe

  Background: I am preparing a PC that I am sending to a relative abroad, who has little or no internet access, and next to no sensible options for getting IT support should anything go wrong. As such I am trying to provide a full set of recovery options such that they are able to reinstall the OS with minimum fuss or assistance if required. The PC is a brand new Acer laptop that came with Windows 7 pre-installed (and an associated recovery partition) and a free upgrade to Windows 8. I have installed Windows 8 from scratch performing a format and clean install from media I burned from the official download. The existing Windows 7 recovery partition is still there, and I can still boot from it. I have created recovery DVDs of that in case it is ever lost. Here are my recovery options so far. I can perform a factory reset of Win 7 via the recovery partition I can perform a factory reset of Win 7 via burned recovery DVDs I can re-install Windows 8 cleanly from a DVD All of these are useful, but not what I want, because the first 2 methods use Win 7, and still fill the machine with crapware, and the latter doesn't provide for any post-install customisation and software installation. So, I am looking to see what other options are available to perform a Windows 8 recovery that will be more than a simple install. I am aware that Win8 comes with some useful refresh tools: Refresh your PC - Re-install Win 8 over the top of your existing installation, recovering from any Windows corruption etc. I can run this from my current install, although it says some files are missing that will be provided by me install or recovery media, which seems to be code for stick your install DVD in, and it starts after I do that - unfortunately for this particular laptop you need to specify a particular WIFI driver or the install bombs out part way through with IRQL errors, and this refresh method skips the part where you can load a driver, so it's no use to me. I think I can fix this by creating a custom recovery image using the recimg.exe command but it takes hours to complete so I haven't tried it yet. Reset your PC - Perform a full install and lose all your files. Again it needs my Install media inserting before it will do anything, but then it provides an error (will include later when I recreate it...) Now, these recovery options look useful (in principal, although both are fail for me) but they rely on having a working system to access the tools, which leads me to the last option, of making a Recovery USB drive. I have made a recovery drive, and it should perform loads of useful things, including copying my WIN7 recovery partition to the drive, providing the above refresh and reset options, providing other troubleshooting options and also the ability to restore from a custom image, only none of them seem to work for me. Creating the Recovery Drive - the option to include my recovery partition is greyed out. The partition exists and works fine, why will it not copy it? Refresh - I imagine this would have the same issues as I described before, but this is moot because when I try it says that the "drive where Windows is installed is locked, please unlock the drive and try again" with no info on what that means and how to do it. Restore - Again, probably pointless as I can just use the DVD, but it also errors: "unable to reset your PC. A required drive partition is missing" System Restore - should let me roll back a bad driver etc as per normal in Windows, only it simply says "To use system restore you must specify which windows installation to restore. Restart this computer, select an operating system, and select system restore" ?!?! System Image Recovery - this seems to be offering to restore from a Windows system image, but this is deprecated in Windows 8, although you can still make one if you use the Windows 7 Backup tools, however the resultant file is too large to put on the USB stick as it's FAT formatted, and would be a massive stack of DVDs anyway. So useless. It would be nice it it would work with the custom recovery image you can use with the refresh command, but there seems no option to do this. Automatic Repair - some diagnostics, which seem useless as it happily tells me it can't fix my problem, even though I have none. Command Prompt - yay, this works! What on earth do I want to use it for... Had any of the above worked, it might be useful, but as any form of install still requires you to have the DVD, and any form of custom recovery image also requires you to have either a massive stack of DVDs or an NTFS formatted backup device in addition to the recovery drive, it sort of ruins the point. It doesn't seem rocket science. I want to create a bootable USB drive that I can refresh Windows over an existing install with, perform a clean reinstall to a bare system, or recovery a customised image with existing apps installed. If anyone can point me in a direction that allows me to make a single recovery drive do these all these things, I would appreciate it. I have a 32Gb USB3 thumb drive that I bought for this very purpose, but it's seems to be fighting to let me do anything useful. At this rate I will be making a DriveImageXML recovery stick and dumping the OS with that, which I know works, but isn't so elegant as using the proper tools..

  Read the article

< Previous Page | 583 584 585 586 587 588 589 590 591 592 593 594  | Next Page >