Search Results

Search found 19299 results on 772 pages for 'off topic'.

Page 587/772 | < Previous Page | 583 584 585 586 587 588 589 590 591 592 593 594  | Next Page >

• Can I use a Drobo FS over the internet? -Or alternative?

  - by SeniorShizzle

  I have a lot of files. A HUGE Aperture library, lots of design work from Photoshop, and a rather large iTunes library too. I really want to get a Drobo FS, the networked one, to store all of my stuff on, so that I can get to it from my MacBook Air (which obviously with its minuscule 64GB drive can't hold my Aperture library by itself) and my iMac which is my main powerhouse. The dealbreaker for me is that I NEED to be able to access my Aperture library, and especially my iTunes library from across the internet. I understand that it will probably be slow and everything, but there's nothing else I can do besides hauling around a huge hard drive with me. So, is there any way I can somehow share my Drobo across the internet, on a VPN or something? My other alternative is to upload everything to my web host, FatCow, which offers unlimited disk space (something I hope to make them regret) and then access it using Expandrive. My only thoughts with this are that with the Drobo, any work that I do locally will be much snappier than if I have to work everything off the cloud. Any suggestions about alternatives would also be welcome.

  Read the article

• Strange battery behavior on laptop

  - by EpsilonVector

  My laptop is behaving rather strangely lately, and I was hoping to get some idea as to what may be causing such symptoms. The problem: When charging, very minute or so it loses connectivity with the AC adapter for a split second, and regains it back immediately. When this happens the little light that indicates the computer is plugged in does flicker off and back on, but I checked the adapter by replacing the battery on my laptop, and this indeed solves the problem, so it is probably the battery which is at fault, not the adapter (I also tried to move the adapter's wire around just to make sure it had nothing to do with torn wires). I suppose that the obvious solution is to get a new battery, but as far as battery defects go- this is a rather strange one; it loses connection with the adapter, but still powers the computer, and changing the power setting to a balanced plan (was maximum performance) seem to have solved the problem too. Is there a chance this is not simply the battery, but some kind of other electronic defect? And if not, what can cause it to behave so strangely? PS I tried to recalibrate it- didn't help.

  Read the article

• DRBD Replication failure

  - by user62513

  A couple of weeks ago I setup a 2 nodes CRM system with one of the resources managed being MySQL over DRBD. Today for maintenance reasons I restarted both nodes but now they can't connect to each other anymore. DRBD fell out of sync and I followed this guide to get it back connected but it's only able to run successfully on one node. But this strange thing happens: If I crm node standby both nodes and I try: crm node online node0 before crm node online node1, all the CRM resources start successfully but the DRBD partitions are still running in StandAlone state. crm node online node1 beofre crm node online node0, the DRBD resource fails to start, thus causing mysql not to start. If I standby both resources and call crm node online node0 then it times out and prints this error: Running crm node online node0 produces this output after timing out Error setting standby=off (section=nodes, set=<null>): Remote node did not respond Error performing operation: Remote node did not respond Is there anything I'm doing wrong here? An alternative will be just do MySQL replication but I'm not sure how to promote a slave to master when the master database is not available.

  Read the article

• Router not connecting to the internet

  - by Peter

  I had a weird problem this morning with my router - it's an Alice Gate VoIP 2 Plus WI-FI - not connecting to the internet after more or less 1 hour online (I'm always connected with the ethernet cable). The led status lights for Power, WI-FI, ADSL, Internet, Service should be on in order to be connected and navigate online. The problem was that the leds ADSL, Internet were off and I did not know why because it never happened before. I looked at the stats in the settings and the numbers for Bytes/Packages for both Sent/Received were there and increasing but I couldn't connect to the internet. I called tech support, they checked and told me to keep the router on for 48 hours because they were checking it. I've reset it twice before and after I called tech support and it still did not work so after about 2 hours of waiting I tried connecting using WI-FI and the leds 'magically' turned on, first the ADSL and Internet(Internet led always turns on last). At this point I'm curious what could of caused this and I'm doubting that the tech-support guys did something. What could of been the problem with the ethernet cable not connecting in the first place? It always works. What do the tech support guys normally do when they tell me to keep the router on so they can 'check it'? PS: I'm using ubuntu 32 bit

  Read the article

• Are my Linux symbolic links acting correctly?

  - by Andy Castles

  Hi all I've been using Linux on and off for the last 15 years and today I came across something in bash that surprised me. Setup the following directory structure: $ cd /tmp $ mkdir /tmp/symlinktest $ mkdir /tmp/symlinktest/dir $ mkdir /tmp/symlinktarget Now create two sym links in symlinktest pointing to symlinktarget: $ cd /tmp/symlinktest $ ln -s ../symlinktarget Asym $ ln -s ../symlinktarget Bsym Now, in bash, the following tab completion does strange things. Type the following: $ cd dir $ cd ../A[TAB] Pressing the tab key above completes the line to: $ cd ../Asym/ as I expected. Now press enter to change into Asym and type: $ cd ../B[TAB] This time pressing the tab key completes the link to: $ cd ../Bsym[space] Note that there is now a space after the Bsym and there is no trailing slash. My question is, why when changing from the physical directory "dir" to Asym it recognises that Asym is a link to a directory, but when changing from one sym link to another, it doesn't recognise that it's a link to a directory? In addition, if I try to create a new file within Asym, I get an error message: $ cd /tmp/symlinktest/Asym $ cat hello > ../Bsym/file.txt -bash: ../Bsym/file.txt: No such file or directory I always thought that symlinks were mostly transparent except to programs that need to manipulate them. Is this normal behaviour? Many thanks, Andy

  Read the article

• What ways are there to set permissions on an Exchange 2003 mailbox?

  - by HopelessN00b

  I'm having a difficult/impossible time tracing down a permissions issue on an Exchange 2003 mailbox, and I was wondering if I'm missing any technical possibilities here. The basic question is what ways are there to set a user's permissions to access a mailbox in Exchange 2003? I know of two. Permissions on the mailbox itself (Mailbox Rights) and having delegated rights. And then, if it's possible, how would one view all the permissions (including delegated permissions) on the mailbox? The situation is that a new user who's been set up "exactly like all the others" in his department (pretty sure he was copied via the right click option in ADUC, in fact) can't access a specific shared mailbox, which I've been assured about a dozen other people do have access to and access on a regular basis. As to how they got permissions to the mailbox, no one knows, so it must have been granted by a white wizard whose spell has since worn off, so now IT has to handle it instead. Anyway... This mailbox is a normal AD user, created as a service account, for which no one knows the password (of course), so it's probably not the case that this service account was being used to delegate permissions. Upon taking examining the Mailbox Rights directly... Here are the permissions I see: This leads me to believe that one of two things are happening - the managers have been delegating full mailbox permissions to the rest of the department, or everyone's logging in using... not their own account. But, before I get too excited about the prospect of busting out the LART and strolling over to that department, I want to make sure I'm not missing another possible explanation. Like most of the rest of the world, I ditched Exchange 2003 at the earliest possible opportunity, and had been looking forward to never seeing it again, so I'm a bit rusty on the intricacies of how it [mostly, sort of] works. Anyone see any or possibilities, or things I may have missed, or does the LART get to come out and play?

  Read the article

• Nginx and Gunicorn hanging on GET requests

  - by whatWhat

  I'm using Nginx + Gunicorn which is serving my Django project. All GET requests hang for ~1 min. The content seems to be available immediately as I can see it in the Browser inspector but the browser itself looks like it's still waiting for more data. Heres my Ngnix config #allow for up to 3 connections per second. limit_req_zone $binary_remote_addr zone=one:10m rate=3r/s; server { listen 80; server_name example.com; root /var/www/example.com/example/; # serve directly - analogous for static/staticfiles location /media/ { # this changes depending on your python version root /home/example/; } location /static/ { # if asset versioning is used if ($query_string) { expires max; } root /var/www/example.com; } location / { #Allow for a burst of 50. limit_req zone=one burst=50 nodelay; proxy_pass_header Server; proxy_set_header Host $http_host; proxy_redirect off; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Scheme $scheme; proxy_connect_timeout 10; proxy_read_timeout 10; proxy_pass http://localhost:8001/; } # what to serve if upstream is not available or crashes error_page 500 502 503 504 /media/50x.html; } My Gunicorn Config: bind = "127.0.0.1:8001" workers = 3 worker_class = "gevent" Is there anything obvious that would be causing the requests to stay open for so long?

  Read the article

• zsh auto-complete event designator

  - by simont

  (See my previous question for additional context). I'm migrating to zsh from bash, and using oh-my-zsh. When my zsh history looks something like the following: git status git add -A git commit I want to be able to re-run git add -A. To do that, I could use !?git add, which should: !?str[?] Refer to the most recent command containing str. The trailing ‘?’ is necessary if this reference is to be followed by a modifier or followed by any text that is not to be considered part of str. The link for zsh event designators is here. Unfortunately, I can't do this - as I'm typing !?git add, as I hit the ' ', it auto-completes the command to the most recent command matching git (ie, it auto-completes with git commit). I can't use the event designator properly because of this auto-completion as I hit the space. I assume this is an oh-my-zsh feature. I have no idea where to look, though - greping for 'complet' in the oh-my-zsh source doesn't get me anywhere. My question: how do I turn off this feature? Or, if that's not something that's known, where should I be looking - if I was going to implement this auto-complete when whitespace is entered, where would be a logical place to do so in the oh-my-zsh framework?

  Read the article

• How do I clear out the ssh-agent entries (on Mac OS X )?

  - by cwd

  I'm running Mac OS X, and it appears that after SSHing to several machines, using identity files, my 'ssh-agent' builds up a lot of identity / keys and then sometimes offers too many to a remote machine, causing them to kick me off before connecting: Received disconnect from 10.12.10.16: 2: Too many authentication failures for cwd It's pretty obvious what's happening, and this page talks about it in more detail: SSH servers only allow you to attempt to authenticate a certain number of times. Each failed password attempt, each failed pubkey/identity that is offered, etc, take up one of these attempts. If you have a lot of SSH keys in your agent, you may find that an SSH server may kick you out before allowing you to attempt password authentication at all. If this is the case, there are a few different workarounds. Rebooting clears the agent and then everything works OK again. I can also add this line to my .ssh/config file to force it to use password authentication: PreferredAuthentications keyboard-interactive,password Anyhow, I saw the note on the page I referenced talking about deleting keys from the agent, but I'm not sure if that applies on a Mac since they appear to be cleared after reboot anyhow. Is there a simple way to clear out all keys in the 'ssh-agent' (the same thing that happens at reboot)?

  Read the article

• Seemingly random network connectivity.

  - by AngryHacker

  This has been driving me nuts for a while. When I turn on the PC (which has a wired Ethernet connection), it cannot be accessed by other computers on the network. In other words, inbound connections do not work. The firewall is disabled. The PC itself can hit up anything it wants just fine. By process of elimination, I've figured out that checking or unchecking the Eaclift driver in the properties for my network connection restored the inbound connection. I do not know what Eaclift driver is or does or how it even got on my PC (e.g. I am not allowed to uninstall it either). And it does not matter whether it's on or off - I just need to toggle it to restore connectivity. One other thing that happens when I toggle the Eaclift driver, is than an Internet Connection icon appears in the Network Connections and it was not there before. Can someone shed some light as to what is going on? How to fix it so that I don't have to deal with this insanity?

  Read the article

• How do I repair my Logitech Anywhere MX?

  - by Stefano Palazzo

  My Anywhere Mouse has got mushy mouse button syndrome. That is, the left mouse button feels a little bit soft, and it easily double clicks, let's go when I drag something. Before I repair it at home, rather than bringing it to the store (I kind of need it, it's the only one I have), I'd like to know exactly what I'm doing. It'd be too bad if I tried to repair it, voided the warranty and didn't succeed. I'm guessing there are screws to open it under the rubber pads. And I suppose I can take those off without breaking them, and put them back on without bending them. How is this mouse held together, and what's the safest way to open it? Once I have it open, will I be able to fix the problem? What's causing the mushy mouse button? Here's what I know so far: It might be the switch itself that's broken, in which case I shouldn't open it (I can't get a replacement, voiding the warranty to "have a look" seems pointless) If there are screws underneath the rubber pads, they're only on the 'front', the back two thirds of the mouse are all battery cover: There's nothing I can see under the batteries either. In the mouse I had before this one, there were sort of springy things connecting the actual button with the switch soldered to the board. They were just lying inside of a bit of plastic, and I could swap the left and right ones easily. If repairing it is more difficult, transferring the problem to the right mouse button would be a very good start.

  Read the article

• Periodic internet connection drops

  - by sterlingholt

  My setup is a dsl modem, and a dlink di 524M router. I'm also using a Witopia VPN which runs through OpenVPN. I've been having trouble with the internet connection dropping very frequently. It comes back shortly, without even a router/modem/computer restart. This happens as frequently as every ten minutes. Occasionally (not often) it will last as long as an hour or two without dropping. When it drops, I can get it back almost immediately by clicking Reconnect in the OpenVPN GUI and letting that do it's thing. It's worth noting that I'm in China. Calling support is a bit difficult because of that. Also I don't really understand all of the router's software, although I've got it generally figured out. I've tried a bunch of stuff, attempts to diagnose and/or fix the problem. No success with any of the following: I've power cycled both the modem and the router. I've tried an ethernet connection to the router. I've connected without the VPN. I've disabled IEEE authentication on all connections. I've checked for viruses. I've tried lifting it off the ground so as to prevent overheating.

  Read the article

• Why does my DSL modem now need a reboot each time for my laptop to connect?

  - by msorens

  I have a rather peculiar home networking issue. For sometime my home network was purring along fine. I could turn on either of my laptops and they would quickly find and connect to my DSL modem (and thence the internet). Several days ago I unplugged my DSL modem for the first time in months. Upon turning it back on and waiting for the boot to finish, the lights on the panel indicated the DSL modem was fully operational, just as before. But that's not what happened. Not at all. Now when I turn on my Win7 laptop, the network icon in my system tray shows a small starburst; hovering over it the tooltip states "Not connected; connections are available". Clicking it lists several nearby networks including my own network showing a strong signal. If I click to connect, it attempts a connection but then I get a dialog stating "Windows was unable to connect to MyNet.". Turning off wireless on my laptop and turning it back on yields no difference. Running the network troubleshooter (which includes doing a repair on the network connection) yields no difference. The only remedy is to reboot the DSL modem (i.e. unplug it, wait a few seconds, then plug it back in). As soon as it goes online my laptop finds it and connects properly. To add one more twist to the story, this happened to me once before, several months ago. After a couple weeks, the situation resolved itself(!). Everything started working properly again, due to nothing I did. Final note: this problem only affects the wireless connection to the DSL modem. My desktop computer, connected via hardline to the DSL modem, connects fine when I turn it on. Any thoughts on why this is happening or how to fix it?

  Read the article

• What program sent which packet to the network [closed]

  - by Erik Johansson

  I would like to have a tcpdump like program that shows which program sent a specific packet, instead of just getting the port number. This is a generic problem I've had on and off sometimes when you have and old tcpdump file lying around you have no way to find what program was sending that data.. The solution in how i can identify which process is making UDP traffic on linux ? is an indication that I can solve this with auditd, dTrace, OProfile or SystemTap, but doesn't show how to do it. I.e. it doesn't show the source port of the program calling bind().. The problem I had was strange UDP packets, and since those ports are so short lived it took me a while to solve this issue. I solved this by running an ugly hack similar to: while true; date +%s.%N;netstat -panut;done So either a method better than this hack, a replacement for tcpdump, or some way to get this info from the kernel so I can patch tcpdump. EDIT: This was asked on superuser "tracking what programs sends to net", no good solution though.

  Read the article

• Why does Exchange 2003 silently reject emails with large attachments?

  - by Cypher

  Our environment: Exchange Server 2003 Standard, single instance, running on Windows Server 2003 Standard. configured to not send/receive mail with attachments larger than 10 MB. NDRs are not enabled. The issue: When an external sender sends an email with an attachment larger than 10MB, Exchange, as configured, does not receive the message. However, the sender of that message does not receive any notifications from his own mail server that the message could not be delivered due to attachment size. However, if an external user tries to send an email to a non-existent user, they do receive a message from their mail server indicating that the user does not exist. Why is that, and is there anything I can do about it? It would be nice if the sender received notification that the attachment file size exceeds our limits and their message was never received... Update The Exchange server has a SpamAssassin box in front of it... could that have something to do with it? Here is one of the last lines from SpamAssassin's logs when searching for my test e-mails: mail postfix/smtp[19133]: 2B80917758: to=, relay=10.0.0.8[10.0.0.8]:25, delay=4.3, delays=2.6/0/0/1.7, dsn=2.6.0, status=sent (250 2.6.0 Queued mail for delivery) My assumption is that Spam Assassin thinks the message is OK and is forwarding it off to Exchange. Update I've verified that Exchange is receiving the message and generating an NDR. However, delivery of NDRs are disabled to prevent Backscatter. Is there something that I can do to get Exchange to send a bounce message to the sending mail server (or verify that message is being sent) so the sending mail server can notify its sender of the bounce?

  Read the article

• File uploads and client_max_body_size in nginx + gunicorn + django

  - by carlosescri

  I need to configure nginx + gunicorn to be able to upload files greater than the default max size in both servers. My nginx .conf file looks like this: server { # ... location / { proxy_pass_header Server; proxy_set_header Host $http_host; proxy_redirect off; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Scheme $scheme; proxy_connect_timeout 60; proxy_pass http://localhost:8000/; } } The idea is to allow requests of 20M for two locations: /admin/path/to/upload?param=value /installer/other/path/to/upload?param=value I've tried to add location directives at the same level than the one I've pasted here (getting 404 errors) and also tried to add them inside the location / directive (getting 413 Entity Too Large errors). My location directives look like these in their simplest form: location /admin/path/to/upload/ { client_max_body_size 20M; } location /installer/other/path/to/upload/ { client_max_body_size 20M; } But they don't work (actually I tested lots of combinations and I'm desperate thinking about this. Please, help If you can: What settings do I need to set to make this work? Thank you so much!

  Read the article

• How can I determine what is killing my network adapter win7 or vista?

  - by datatoo

  I thought this issue was like another person here, and that downloading the nvidia chipset drivers was the solution. However that is not all that is going on. This machine had Vista 64bit and is now Win7. Same issue with both. I have explicitly been denying network driver updates since getting things working again and when a Windows updates occurs on seemingly benign Office updates the adapter fails to work. Is the update process somehow protecting this machine by turning off things and it fails to recover connectivity after a restart? All that seems to ever work is a system restore. Which does work. Since there are 25 pending updates asking to do there thing, I hate to think this is a one by one update test to find the culprit. Any ideas? This has an integrated nic, video, and I guess audio on the motherboard. ES5200 intel cpu on a gateway 4800-05e I am not quite sure how to determine the actual network adapter. This is a wired adapter. I suppose worst case I can try another adapter if this keeps happening.

  Read the article

• Vista Screen resolution Changes when Switching Users

  - by Benjol

  I regularly have a problem when switching between users in Vista - the screen resolution drops down to 800x600. If I try to set the resolution back to the maximum, it says nothing, but just keeps it at 800x600. I can set it back to an intermediate value. Otherwise I have to either restart the PC, or sometimes if I log off one of the users, I can then set the resolution back to max. Might it also have something to do with using sleep mode instead of performing regular shutdowns? I thought it might be related to the desktop background image taking up too much space, but even with plain colours, the problem still occurs. There is an enormous thread on this here, but not really any answers. From what I can gather from that thread, it isn't related to any particular applications, nor limited to a particular make of graphics card or monitor, so I don't think that including hardware details is useful. This is a very annoying problem, as it screws up my desktop and screen layout every single time. Has anyone here experienced this problem or found a solution? I've noticed that Windows Update has tried to install nVidia updates and apparently they've failed on several occasions. Not sure if that is of any relevance or not. UPDATE The last post on the thread: FWIW - I had this problem for about 2 years and wrote a number of posts in this thread in the past. It survived OS reinstallation, change of practically all of my hardware piece by piece (mobo, cpu, monitor, graphics card, memory, power supply...) I used to be affected by this annoying problem at least once every 24-48 hours. About 1.5 months ago I wiped out my 32 bit vista ultimate installation and installed Windows7 ultimate 64 bit from scratch and never saw this problem again. GOOD RIDDANCE. Vista was a pathetic piece of __ that felt like a flashback to the old [horrible] NT4/Windows95 days. I was seriously considering switching over to Apple/Mac OSX if this problem persisted.

  Read the article

• What is the optimum way to secure a company wide wiki?

  - by Mark Robinson

  We have a wiki which is used by over half our company. Generally it has been very positively received. However, there is a concern over security - not letting confidential information fall into the wrong hands (i.e. competitors). The default answer is to create a complicated security matrix defining who can read what document (wiki page) based on who created it. Personally I think this mainly solves the wrong problem because it creates barriers within the company instead of a barrier to the external world. But some are concerned that people at a customer site might share information with a customer which then goes to the competitor. The administration of such a matrix is a nightmare because (1) the matrix is based on department and not projects (this is a matrix organisation), and (2) because in a wiki all pages are by definition dynamic so what is confidential today might not be confidential tomorrow (but the history is always readable!). Apart from the security matrix, we've considered restricting content on the wiki to non super secret stuff, but off course that needs to be monitored. Another solution (the current) is to monitor views and report anything suspicious (e.g. one person at a customer site having 2000 views in two days was reported). Again - this is not ideal because this does not directly imply a wrong motive. Does anyone have a better solution? How can a company wide wiki be made secure and yet keep its low threshold USP? BTW we use MediaWiki with Lockdown to exclude some administrative staff.

  Read the article

• Using gitlab behind Apache proxy all generated urls are wrong

  - by Hippyjim

  I've set up Gitlab on Ubuntu 12.04 using the default package from https://about.gitlab.com/downloads/ {edit to clarify} I've set up Apache to proxy and run the nginx server the package installed on port 8888 (or so I thought). As I had Apache installed already I have to run nginx on localhost:8888. The problem is, all images (such as avatars) are now served from http://localhost:8888, and all the checkout urls Gitlab gives are also localhost - instead of using my domain name. If I change /etc/gitlab/gitlab.rb to use that url, then Gitlab stops working and gives a 503. Any ideas how I can tell Gitlab what URL to present to the world, even though it's really running on localhost? /etc/gitlab/gitlab.rb looks like: # Change the external_url to the address your users will type in their browser external_url 'http://my.local.domain' redis['port'] = 6379 postgresql['port'] = 2345 unicorn['port'] = 3456 and /opt/gitlab/embedded/conf/nginx.conf looks like: server { listen localhost:8888; server_name my.local.domain; [Update] It looks like nginx is still listening on the wrong port if I don't specify localhost:8888 as the external_url. I found this in /var/log/gitlab/nginx/error.log 2014/08/19 14:29:58 [emerg] 2526#0: bind() to 0.0.0.0:80 failed (98: Address already in use) 2014/08/19 14:29:58 [emerg] 2526#0: bind() to 0.0.0.0:80 failed (98: Address already in use) 2014/08/19 14:29:58 [emerg] 2526#0: bind() to 0.0.0.0:80 failed (98: Address already in use) 2014/08/19 14:29:58 [emerg] 2526#0: bind() to 0.0.0.0:80 failed (98: Address already in use) 2014/08/19 14:29:58 [emerg] 2526#0: bind() to 0.0.0.0:80 failed (98: Address already in use) 2014/08/19 14:29:58 [emerg] 2526#0: still could not bind() Apache setup looks like: <VirtualHost *:80> ServerName my.local.domain ServerSignature Off ProxyPreserveHost On AllowEncodedSlashes NoDecode <Location /> ProxyPass http://localhost:8888/ ProxyPassReverse http://127.0.0.1:8888 ProxyPassReverse http://my.local.domain </Location> </VirtualHost> Which seems to proxy everything back ok if Gitlab listens on localhost:8888 - I just need Gitlab to start displaying the right URL, instead of localhost:8888.

  Read the article

• Has anyone else experienced page fault crashes with Snow Leopard on MacBook Pro?

  - by BruceMartin

  I bought a Macbook Pro computer on Sept 3rd from MacMall. As I was using it to learn Snow Leopard (this is my first Mac, I am a long time Windows developer), it would crash every one or two hours. After calling Apple support, I dropped it off at the Apple store for diagnostic testing and repair. WhenI picked up the computer from Apple, they told me that it did not crash while they had it. They suspected a software problem, so they had done a fresh install of Snow Leopard for me. At home I went through the start up procedure with the newly installed Snow Leopard. Then I downloaded the iPhone SDK, and the computer crashed again while I was away waiting for the download to finish. I was using a USB mouse, which was the only device attached. No other software installed. I was presented with a dump that mentions terms like "panic", Kernel trap", and "page fault". Does anyone have any idea what this problem might be? I really can not use this MacBook under these circumstances.

  Read the article

• lsof not showing what port a proc is listening on

  - by ericslaw

  I have many processes on a box listening on several ports. I am trying to map ports to pids. The problem is that lsof is not telling me what ports belong to which process. Given an apache listening on port 80, I can see it listening via netstat: user@host% netstat -an|grep LISTEN|grep 80 *.80 *.* 0 0 49152 0 LISTEN But when I try to map port 80 to a pid I get nothing: user@host% lsof -iTCP:80 -t When I try seeing what sockets that specific pid is using I get: user@host% lsof -lnP -p31 -a -i COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME libhttpd. 31 0 15u IPv4 0x6002d970b80 0t0 TCP *:65535 (LISTEN) Notice the *:65535 in the NAME column. Does anyone know why lsof is not reporting the port in use? I am running as root. I am using a mix of lsof and os versions: lsof v4.77 on Solaris10 sparc lsof v4.72 on Redhat4.2 etc I know that linux solutions can use "netstat -p", so I guess I'm only looking for why solaris isn't working, but I find lsof is frequently silent and not showing me expected data.

  Read the article

• How do I stop VLC from stealing my volume buttons

  - by MGOwen

  when I press the volume buttons on my laptop, usually the system volume is changed. However, when I do this with VLC it "steals" the presses and adjusts it's own "volume" instead. The system volume is also changed. I can't find any way to turn this off in VLC. Does anyone know? Update: Sorry, some more details I should have included originally: VLC VERSION: 1.1.4 (and a few previous releases, back to about 1.1.0 or so, I think) OS: Win Vista Pro 32 HARDWARE: Dell 1720 laptop (the volume buttons are little buttons on the front of the unit, they may work something like "media" keyboard volume buttons) Update: The buttons seem to map to Ctrl+Alt+b and Ctrl+Alt+c (according to the shortcut key box in windows shortcut properties) but the VLC advanced preferences hotkeys screen doesn't list these as the keys it uses for volume. I changed it so there are no volume hotkeys in VLC settings - no luck it still steals the presses and adjusts the volume. Also, pressing Ctrl+Alt+b or c doesn't change my system volume, so who knows what windows or VLC are doing to recognise those volume buttons. :(

  Read the article

• How does one skip "Windows did not shut down successfully" in Win7-64?

  - by XenonofArcticus

  Migrating an app from an expensive and unreliable dedicated embedded x86 box running WinXP-embedded to COTS hardware (Dell E6410 laptop) running normal Win7-64. At this time, it's not feasible to deploy using Windows 7 embedded. The problem is, that the system is still sort of "embedded". The power could shut off at virtually any time without prior warning. We've stripped the OS down and removed the battery capability so that it will power down as desired. The app never writes to the disk, so it's not like we're going to corrupt anything terribly. The system is essentially idle after our app is up and running (with the exception of some computation, graphics, and TCP/IP and serial communications) so the OS enters a pretty stable state rather quickly. After a power-loss however, it rightly complains that Windows did not shut down successfully and presents the user with the Windows Error Recovery text screen. If left alone, it does eventually move on booting just fine, but we'd like to skip that step if possible. WinXP-embedded is designed to do this automatically, so I know it's possible. I've looked at the Kernel Switches but I didn't see anything documented for "Skip Windows Error Recovery". I've also read extensively on the startup process: http://homepage.ntlworld.com./jonathan.deboynepollard/FGA/windows-nt-6-boot-process.html I know I can disable the auto chkdsk in the registry, but that's not the same thing either. So, how do I streamline the boot process to not hassle the user about a situation that will be the regular normal situation?

  Read the article

• How to play 24 fps video smoothly on a 60Hz display?

  - by netvope

  I use mpc-hc to play videos on Win7 x64. With the default settings (#1), video playback is great most of the time. But for panning shots, playback is not smooth. I stepped through the video frame by frame and found that the panning movement is smooth (e.g. each frame shifts horizontally by 10 pixels), so the problem is how the 23.976 fps video is interpolated to 60Hz. The judder looks like what would be caused by a "2:3 pulldown", where the frames are played unevenly like: frame 1, 1, 2, 2, 2, 3, 3, 4, 4, 4, etc (#2) Using "optimal renderer settings" (#3) instead of the default disables the Aero theme and causes tearing. Setting my LCD display to 50Hz may have improved the judder slightly (but I can't really tell). My display does not support 24Hz or 48Hz, and forcing them in the Nvidia control panel gives blurry screen. I've tried other video players (VLC and KMPlayer), the ReClock Directshow Filter, video files from different sources (#4), turning on/off DXVA, and a computer with a different GPU, but the judder in the playback is similar. None of them solved the problem. So, how can I play 23.976 or 24 fps video smoothly on a 60Hz display? I think a video player could make the video smoother by doing linear interpolation, such as: 1. 100% frame 1 2. 60% frame 1 + 40% frame 2 3. 20% frame 1 + 80% frame 2 4. 80% frame 2 + 20% frame 3 5. 40% frame 2 + 60% frame 3 6. 100% frame 3 7. 60% frame 3 + 40% frame 4 .. etc Can any existing video player do this? Footnotes: (#1) Video renderer: EVR Custom Pres. (#2) This example converts a 24 fps video into 30 fps (#3) View Renderer settings Reset Reset to optimal renderer settings (#4) The files I have are all H.264 mkv files, but I don't think the file format/encoding matters.

  Read the article

< Previous Page | 583 584 585 586 587 588 589 590 591 592 593 594  | Next Page >