Search Results

Search found 5716 results on 229 pages for 'dual channel'.

Page 59/229 | < Previous Page | 55 56 57 58 59 60 61 62 63 64 65 66  | Next Page >

  • Why am I getting kicked from an IRC channel in one OS (xp) but not in the other OS (7)? [closed]

    - by moshe
    I got kicked from an IRC channel. I have Windows XP and now if I'm trying to get into this specific channel, I get inside but I get immediately kicked out. I can come in again, and again get kicked out. It seems this is done automatically. Now I have also installed, on another hard drive in the same computer Windows 7. On Windows7 I can get into this same channel and never kicked out! It's the same computer, but different operating system(separate Hard Drives). How can it be? Is the KICK command bias towards the operating system I got KICKed in? Please explain to me how this thing is happening. PS: I forgot to mention that it doesn't matter if i change my IP or my nickname, I continue to kicked out from this channel. Again, in windows 7 I can get in without a problem. another thing that is good to mention is that i got kicked out when i was using windows XP, and not windows 7. i think that it could happened also with windows 2000 and vista, so i dont bother the OS itself, but why it's acting differently with a different OS?

    Read the article

  • Zero-channel RAID for High Performance MySQL Server (IBM ServeRAID 8k) : Any Experience/Recommendation?

    - by prs563
    We are getting this IBM rack mount server and it has this IBM ServeRAID8k storage controller with Zero-Channel RAID and 256MB battery backed cache. It can support RAID 10 which we need for our high performance MySQL server which will have 4 x 15000K RPM 300GB SAS HDD. This is mission-critical and we want as much bandwidth and performance. Is this a good card or should we replace with another IBM RAID card? IBM ServeRAID 8k SAS Controller option provides 256 MB of battery backed 533 MHz DDR2 standard power memory in a fixed mounting arrangement. The device attaches directly to IBM planar which can provide full RAID capability. Manufacturer IBM Manufacturer Part # 25R8064 Cost Central Item # 10025907 Product Description IBM ServeRAID 8k SAS - Storage controller (zero-channel RAID) - RAID 0, 1, 5, 6, 10, 1E Device Type Storage controller (zero-channel RAID) - plug-in module Buffer Size 256 MB Supported Devices Disk array (RAID) Max Storage Devices Qty 8 RAID Level RAID 0, RAID 1, RAID 5, RAID 6, RAID 10, RAID 1E Manufacturer Warranty 1 year warranty

    Read the article

  • Does a single LACP channel over multiple switches increase redundancy?

    - by Sirch
    I am curious for opinions, findings, or evidence that having multiple interfaces bonded using LACP to ports in multiple switches can increase redundancy. Previously bonded interfaces have always been to a single switch, with a redundant channel to another port. Without getting into vendor specifics, my thought is that as this is a single LACP, the likelihood that an event or change could lead to a wide service outage. Without having the spare equipment or time to test this single channel over diverse switches, could anyone with a greater networking knowledge than myself, tell me if there a network side event that would bring down the network connectivity to a server that had created a bonded interface to two ports on separate switches? Does the use of bonded ethernet channels across multiple switches (that we are advised that we can use) from the server, provide both improved throughput (unquestionably), and improved redundancy (uncertain). Could/would network events such as switch failure, port migration, patching, recovery, etc, cause the channel for both server network interfaces to be unavailable? Thanks in advance.

    Read the article

  • Secondary monitor bug: a problem in WPF or in the graphics driver?

    - by emddudley
    I have discovered a strange bug with my WPF application and I am trying to determine whether it is a problem with WPF or my graphics driver so that I can report it to the appropriate company. I have a Quadro FX 1700 with the latest drivers (197.54) on a Windows XP system, running a .NET 3.5 SP1 application. I have dual monitors, and when I maximize then minimize a child window of the main window on my primary monitor, the child window gets drawn on the secondary monitor as well. It appears in both places. I made a sample application (code is below) which induces this behavior. Start the application and ensure the main window is on your primary monitor. Double-click the main window. A green child window should appear. Click the green child window to maximize. Click the green child window to minimize. Can anyone else reproduce this problem? On my system the green child restores, but then it's drawn on both my primary and secondary monitors, rather than just the primary monitor. App.xaml <Application xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" x:Class="DualMonitorBug.App" StartupUri="Shell.xaml" /> App.xaml.cs using System.Windows; namespace DualMonitorBug { public partial class App : Application { } } Shell.xaml <Window xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" x:Class="DualMonitorBug.Shell" Title="Shell" Height="480" Width="640" MouseDoubleClick="ShowDialog" /> Shell.xaml.cs using System.Windows; using System.Windows.Input; namespace DualMonitorBug { public partial class Shell : Window { public Shell() { InitializeComponent(); } private void ShowDialog(object sender, MouseButtonEventArgs e) { DialogWindow dialog = new DialogWindow(); dialog.Owner = this; dialog.Show(); } } } DialogWindow.xaml <Window xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" x:Class="DualMonitorBug.DialogWindow" Title="Dialog Window" Height="240" Width="320" AllowsTransparency="True" Background="Green" MouseLeftButtonDown="ShowHideDialog" WindowStyle="None" /> DialogWindow.xaml.cs using System.Windows; using System.Windows.Input; namespace DualMonitorBug { public partial class DialogWindow : Window { public DialogWindow() { InitializeComponent(); } private void ShowHideDialog(object sender, MouseButtonEventArgs e) { this.WindowState = (this.WindowState == WindowState.Normal) ? WindowState.Maximized : WindowState.Normal; } } }

    Read the article

  • IPC problem in the c# - ipc is already registered

    - by Lily
    hi I am trying to create two IPC channels IpcChannel ipcChannel = new IpcChannel("DroolsClient"); ChannelServices.RegisterChannel(ipcChannel, false); objec = (DroolsInterface.RulesEngineInterface)Activator.GetObject(typeof(DroolsInterface.RulesEngineInterface), "ipc://Drools/SreeniRemoteObj"); IpcChannel ipcChannel2 = new IpcChannel("ProxemClient"); ChannelServices.RegisterChannel(ipcChannel2, true); objec2 = (ProxemProject.ProxemInterface)Activator.GetObject(typeof(ProxemProject.ProxemInterface), "ipc://ProxemProcess/SreeniRemoteObj"); But when it gets to the second ChannelServices it gives an error The channel 'ipc' is already registered Would anyone be kind enough to help please

    Read the article

  • RHEL - blocked FC remote port time out: saving binding

    - by Dev G
    My Server went into a faulty state since the database could not write on the partition. I found out that the partition went into Read Only mode. Finally to fix it, I had to do a hard reboot. Linux 2.6.18-164.el5PAE #1 SMP Tue Aug 18 15:59:11 EDT 2009 i686 i686 i386 GNU/Linux /var/log/messages Oct 31 00:56:45 ota3g1 Had[17275]: VCS ERROR V-16-1-10214 Concurrency Violation:CurrentCount increased above 1 for failover group sg_network Oct 31 00:57:05 ota3g1 Had[17275]: VCS CRITICAL V-16-1-50086 CPU usage on ota3g1.mtsallstream.com is 100% Oct 31 01:01:47 ota3g1 Had[17275]: VCS ERROR V-16-1-10214 Concurrency Violation:CurrentCount increased above 1 for failover group sg_network Oct 31 01:06:50 ota3g1 Had[17275]: VCS ERROR V-16-1-10214 Concurrency Violation:CurrentCount increased above 1 for failover group sg_network Oct 31 01:11:52 ota3g1 Had[17275]: VCS ERROR V-16-1-10214 Concurrency Violation:CurrentCount increased above 1 for failover group sg_network Oct 31 01:12:10 ota3g1 kernel: lpfc 0000:29:00.1: 1:1305 Link Down Event x2 received Data: x2 x20 x80000 x0 x0 Oct 31 01:12:10 ota3g1 kernel: lpfc 0000:29:00.1: 1:1303 Link Up Event x3 received Data: x3 x1 x10 x1 x0 x0 0 Oct 31 01:12:12 ota3g1 kernel: lpfc 0000:29:00.1: 1:1305 Link Down Event x4 received Data: x4 x20 x80000 x0 x0 Oct 31 01:12:40 ota3g1 kernel: rport-8:0-0: blocked FC remote port time out: saving binding Oct 31 01:12:40 ota3g1 kernel: lpfc 0000:29:00.1: 1:(0):0203 Devloss timeout on WWPN 20:25:00:a0:b8:74:f5:65 NPort x0000e4 Data: x0 x7 x0 Oct 31 01:12:40 ota3g1 kernel: sd 8:0:0:4: SCSI error: return code = 0x00010000 Oct 31 01:12:40 ota3g1 kernel: end_request: I/O error, dev sdi, sector 38617577 Oct 31 01:12:40 ota3g1 kernel: sd 8:0:0:4: SCSI error: return code = 0x00010000 Oct 31 01:12:40 ota3g1 kernel: end_request: I/O error, dev sdi, sector 283532153 Oct 31 01:12:40 ota3g1 kernel: sd 8:0:0:4: SCSI error: return code = 0x00010000 Oct 31 01:12:40 ota3g1 kernel: end_request: I/O error, dev sdi, sector 90825 Oct 31 01:12:40 ota3g1 kernel: Aborting journal on device dm-16. Oct 31 01:12:40 ota3g1 kernel: sd 8:0:0:4: SCSI error: return code = 0x00010000 Oct 31 01:12:40 ota3g1 kernel: end_request: I/O error, dev sdi, sector 868841 Oct 31 01:12:40 ota3g1 kernel: sd 8:0:0:4: SCSI error: return code = 0x00010000 Oct 31 01:12:40 ota3g1 kernel: Aborting journal on device dm-10. Oct 31 01:12:40 ota3g1 kernel: end_request: I/O error, dev sdi, sector 37759889 Oct 31 01:12:40 ota3g1 kernel: sd 8:0:0:4: SCSI error: return code = 0x00010000 Oct 31 01:12:40 ota3g1 kernel: end_request: I/O error, dev sdi, sector 283349449 Oct 31 01:12:40 ota3g1 kernel: printk: 6 messages suppressed. Oct 31 01:12:40 ota3g1 kernel: Aborting journal on device dm-12. Oct 31 01:12:40 ota3g1 kernel: EXT3-fs error (device dm-12) in ext3_reserve_inode_write: Journal has aborted Oct 31 01:12:40 ota3g1 kernel: Buffer I/O error on device dm-16, logical block 1545 Oct 31 01:12:40 ota3g1 kernel: lost page write due to I/O error on dm-16 Oct 31 01:12:40 ota3g1 kernel: sd 8:0:0:4: SCSI error: return code = 0x00010000 Oct 31 01:12:40 ota3g1 kernel: end_request: I/O error, dev sdi, sector 12745 Oct 31 01:12:40 ota3g1 kernel: Buffer I/O error on device dm-10, logical block 1545 Oct 31 01:12:40 ota3g1 kernel: EXT3-fs error (device dm-16) in ext3_reserve_inode_write: Journal has aborted Oct 31 01:12:40 ota3g1 kernel: lost page write due to I/O error on dm-10 Oct 31 01:12:40 ota3g1 kernel: sd 8:0:0:4: SCSI error: return code = 0x00010000 Oct 31 01:12:40 ota3g1 kernel: end_request: I/O error, dev sdi, sector 37749121 Oct 31 01:12:40 ota3g1 kernel: Buffer I/O error on device dm-12, logical block 0 Oct 31 01:12:40 ota3g1 kernel: lost page write due to I/O error on dm-12 Oct 31 01:12:40 ota3g1 kernel: sd 8:0:0:4: SCSI error: return code = 0x00010000 Oct 31 01:12:40 ota3g1 kernel: EXT3-fs error (device dm-12) in ext3_dirty_inode: Journal has aborted Oct 31 01:12:40 ota3g1 kernel: end_request: I/O error, dev sdi, sector 37757897 Oct 31 01:12:40 ota3g1 kernel: Buffer I/O error on device dm-12, logical block 1097 Oct 31 01:12:40 ota3g1 kernel: lost page write due to I/O error on dm-12 Oct 31 01:12:40 ota3g1 kernel: sd 8:0:0:4: SCSI error: return code = 0x00010000 Oct 31 01:12:40 ota3g1 kernel: end_request: I/O error, dev sdi, sector 283337089 Oct 31 01:12:40 ota3g1 kernel: Buffer I/O error on device dm-16, logical block 0 Oct 31 01:12:40 ota3g1 kernel: lost page write due to I/O error on dm-16 Oct 31 01:12:40 ota3g1 kernel: sd 8:0:0:4: SCSI error: return code = 0x00010000 Oct 31 01:12:40 ota3g1 kernel: EXT3-fs error (device dm-16) in ext3_dirty_inode: Journal has aborted Oct 31 01:12:40 ota3g1 kernel: end_request: I/O error, dev sdi, sector 37749121 Oct 31 01:12:40 ota3g1 kernel: Buffer I/O error on device dm-12, logical block 0 Oct 31 01:12:41 ota3g1 kernel: lost page write due to I/O error on dm-12 Oct 31 01:12:41 ota3g1 kernel: sd 8:0:0:4: SCSI error: return code = 0x00010000 Oct 31 01:12:41 ota3g1 kernel: end_request: I/O error, dev sdi, sector 283337089 Oct 31 01:12:41 ota3g1 kernel: Buffer I/O error on device dm-16, logical block 0 Oct 31 01:12:41 ota3g1 kernel: lost page write due to I/O error on dm-16 Oct 31 01:12:41 ota3g1 kernel: sd 8:0:0:4: SCSI error: return code = 0x00010000 df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/cciss-root 4.9G 730M 3.9G 16% / /dev/mapper/cciss-home 9.7G 1.2G 8.1G 13% /home /dev/mapper/cciss-var 9.7G 494M 8.8G 6% /var /dev/mapper/cciss-usr 15G 2.6G 12G 19% /usr /dev/mapper/cciss-tmp 3.9G 153M 3.6G 5% /tmp /dev/sda1 996M 43M 902M 5% /boot tmpfs 5.9G 0 5.9G 0% /dev/shm /dev/mapper/cciss-product 25G 16G 7.4G 68% /product /dev/mapper/cciss-opt 20G 4.5G 14G 25% /opt /dev/mapper/dg_db1-vol_db1_system 18G 2.2G 15G 14% /database/OTADB/sys /dev/mapper/dg_db1-vol_db1_undo 18G 5.8G 12G 35% /database/OTADB/undo /dev/mapper/dg_db1-vol_db1_redo 8.9G 4.3G 4.2G 51% /database/OTADB/redo /dev/mapper/dg_db1-vol_db1_sgbd 8.9G 654M 7.8G 8% /database/OTADB/admin /dev/mapper/dg_db1-vol_db1_arch 98G 24G 69G 26% /database/OTADB/arch /dev/mapper/dg_db1-vol_db1_indexes 240G 14G 214G 6% /database/OTADB/index /dev/mapper/dg_db1-vol_db1_data 275G 47G 215G 18% /database/OTADB/data /dev/mapper/dg_dbrman-vol_db_rman 8.9G 351M 8.1G 5% /database/RMAN /dev/mapper/dg_app1-vol_app1 151G 113G 31G 79% /files/ota /etc/fstab /dev/cciss/root / ext3 defaults 1 1 /dev/cciss/home /home ext3 defaults 1 2 /dev/cciss/var /var ext3 defaults 1 2 /dev/cciss/usr /usr ext3 defaults 1 2 /dev/cciss/tmp /tmp ext3 defaults 1 2 LABEL=/boot /boot ext3 defaults 1 2 tmpfs /dev/shm tmpfs defaults 0 0 devpts /dev/pts devpts gid=5,mode=620 0 0 sysfs /sys sysfs defaults 0 0 proc /proc proc defaults 0 0 /dev/cciss/swap swap swap defaults 0 0 /dev/cciss/product /product ext3 defaults 1 2 /dev/cciss/opt /opt ext3 defaults 1 2 /dev/dg_db1/vol_db1_system /database/OTADB/sys ext3 defaults 1 2 /dev/dg_db1/vol_db1_undo /database/OTADB/undo ext3 defaults 1 2 /dev/dg_db1/vol_db1_redo /database/OTADB/redo ext3 defaults 1 2 /dev/dg_db1/vol_db1_sgbd /database/OTADB/admin ext3 defaults 1 2 /dev/dg_db1/vol_db1_arch /database/OTADB/arch ext3 defaults 1 2 /dev/dg_db1/vol_db1_indexes /database/OTADB/index ext3 defaults 1 2 /dev/dg_db1/vol_db1_data /database/OTADB/data ext3 defaults 1 2 /dev/dg_dbrman/vol_db_rman /database/RMAN ext3 defaults 1 2 /dev/dg_app1/vol_app1 /files/ota ext3 defaults 1 2 Thanks for all the help.

    Read the article

  • Understanding Linux SCSI queue depths

    - by Troels Arvin
    I'm experimenting with the effects of different SCSI queue depth values on a Dell server running CentOS Linux 5.4 (x86_64). The server has two QLogic QLE2560 FC HBAs connected via multipathing to a storage system. The storage system has allocated two LUNs to the server, each connected through four paths in an active-active-active-active round-robin configuration. All in all, the two LUNs exist as eight /dev/sdX devices, represented by two devices in /dev/mpath. I currently adjust the queue depth values in /etc/modprobe.conf and check the result (after rebooting) by looking in the seventh column of /proc/scsi/sg/devices. Two questions related to that: Is there a way to adjust queue depths without rebooting or unloading the qla2xxx kernel module? E.g., can I echo a new queue depth value into some /proc or /sys-like file to update the queue depth? If I set the queue depth to 128, is that 128 in total for all devices handled by the qla2xxx module?, or 128 for each HBA? (256 in total), or 128 for each of the eight /dev/sdX devices (1024 in toal)?, or 128 for each of the two /dev/mpath/... devices (256 in total)? This is important for me to know so that my server doesn't flood the storage system, affecting other servers connected to it.

    Read the article

  • Can I have different ESX hosts accessing the same LUN over different protocols?

    - by Kevin Kuphal
    I currently have a cluster of two ESX 3.5U2 servers connected directly via FiberChannel to a NetApp 3020 cluster. These hosts mount four VMFS LUNs for virtual machine storage. Currently these LUNs are only made available via our FiberChannel initator in the Netapp configuration If I were to add an ESXi host to the cluster for internal IT use can I: Make the same VMFS LUNs available via the iSCSI initiator on the Netapp Connect this ESXi host to those LUNs via iSCSI Do all of this while the existing two ESX hosts are connected to those LUNs via FiberChannel Does anyone have experience with this type of mixed protocol environment, specifically with Netapp?

    Read the article

  • How to block some disks from probes on Linux boot?

    - by Igor Velkov
    My linux host connected to SAN with FC interface. It connect with one path, and see some luns, that can't access, because they need anohter path, not available to host. On boot linux probe all lun he can see, get read error on unaccessible luns, and hangs there for a long-long time. Is there a way to disable any access to some luns at boot time, and later? I found a filters for device ignoration for LVM and MULTIPATH, but it not help during boot process. Generally, lvm still affected too despite of filter, and gives me a IO error on every operation like lvdisplay and vgdisplay, but this is another question.

    Read the article

  • Alpha plugin in GStreamer not working

    - by Miguel Escriva
    Hi! I'm trying to compose two videos, and I'm using the alpha plug-in to make the white color transparent. To test the alpha plug-in I'm creating the pipeline with gst-launch. The first test I done was: gst-launch videotestsrc pattern=smpte75 \ ! alpha method=custom target-r=255 target-g=255 target-b=255 angle=10 \ ! videomixer name=mixer ! ffmpegcolorspace ! autovideosink \ videotestsrc pattern=snow ! mixer. and it works great! Then I created two videos with those lines: gst-launch videotestsrc pattern=snow ! ffmpegcolorspace ! theoraenc ! oggmux ! filesink location=snow.ogv gst-launch videotestsrc pattern=smpte75 ! ffmpegcolorspace ! theoraenc ! oggmux ! filesink location=bars75.ogv And changed the videotestsrc to a filesrc and it continues working gst-launch filesrc location=bars75.ogv ! decodebin2 \ ! alpha method=custom target-r=255 target-g=255 target-b=255 angle=10 \ ! videomixer name=mixer ! ffmpegcolorspace ! autovideosink \ filesrc location=snow.ogv ! decodebin2 ! alpha ! mixer. But, when I use the ideo I want to compose, I'm not able to make the white color transparent gst-launch filesrc location=video.ogv ! decodebin2 \ ! alpha method=custom target-r=255 target-g=255 target-b=255 angle=10 \ ! videomixer name=mixer ! ffmpegcolorspace ! autovideosink \ filesrc location=snow.ogv ! decodebin2 ! alpha ! mixer. Can you help me? Any idea what is happening? I'm using GStreamer 0.10.28 You can download the test videos from here: http://polimedia.upv.es/pub/gst/gst.zip Thanks in advance, Miguel Escriva

    Read the article

  • SAN newbie: What kind of fiber cables do I need to connect to the front end ports on my EMC CX300

    - by red888
    I have an old CX300 I'm messing with and I cant determine what kind of HBA\fiber cables I need to connect a server to the front end ports on the DPE2. The hardware reference doesn't give me any details and being new to FC-SAN all of the options are pretty overwhelming. I don't know if the ports are SC or LC or if it requires singlemode or multimode. Googling hasn't turned up anything for me either. All I know is that it supports 2GB Fiber. Here is a pic of one the modules. You can clearly see the front-end ports (FE)

    Read the article

  • Merit and demerits for various Linux fiberchannel multipath options

    - by wzzrd
    On our Linux servers, we currently use HPs qla2xxx drivers, because it has multipathing (active/passive) built in. The are, however, various other options, like Red Hats device-mapper-multipath with the stock qla2xxx drivers (multibus and failover) and things like SecurePath and PowerPath (both of which can do trunking, iirc). Can someone tell me what the merits and demerits of the various options are (if I can ask such a question), besides the obvious fact that the {Secure,Power}Path options cost vast amounts of money? I'm mainly interested in the freely available options, like HPs qla2xxx vs. Red Hats multipathd and possible other open source solutions, but I would like to hear good reasons to go for the commercial solutions too. UPDATE: I'll be benchmarking various options the coming few days (the average of 10 runs of iozone for each option (options being native qla2xxx failver, native qla2xxx multibus, HP qla2xxx failover)). I'll post a summary of results here for those interested.

    Read the article

  • Fiber in Cable Management Arm

    - by mrtroy
    I'm aware of the existing debate on cable management arms. For those people who DO use cable management arms, do you put Fiber into the arms? It looks like I'm fine on minimum bend radii, but am looking for additional opinions before I do anything. -Troy

    Read the article

  • Diagnosing SAN connectivity issues (RHEL5)

    - by Matthew
    We are currently utilizing GFS2 to share a SAN LUN between 3 servers. However due to a feature problem with vendor software we are using, we currently have the volume unmounted on two of the boxes, and are instead exporting the GFS2 filesystem via NFS from the first one (the software requires some weird locking mechanics that GFS2 doesn't support). As of this morning, NFS was no longer able to read/write to the volume from any of the servers, including the NFS server. I then tried checking the normal mount (the directory that is exported on the NFS server) and I received a weird input/output error just trying to CD into it. When I tried running multipath, I got a DM error, however multipath -l worked just fine. I tried unmounting the GFS2 volume, and the CLI hung. I ran init 0 which killed most services, but then the shutdown appeared to have been hung. I logged in via out of band access (hp ILO) and saw that the shutdown was hung trying to unmount GFS2 volumes. My main priority was getting the box back online so after about 5 minutes of waiting I did a hard reset. I am now trying to figure out what went wrong. What are the correct logs to investigate? I've never run into SAN issues like this before. The SAN is connected via 2 fibre connections. Any help would really be appreciated. Everything appears to be up and functional now.

    Read the article

  • Which events specifically cause Windows 2008 to mark a SAN volume offline?

    - by Jeremy
    I am searching for specific criteria/events that will cause Windows 2008 to mark a SAN volume as offline in disk management, even though it is connected to that SAN volume via FC or iSCSI. Microsoft states that "A dynamic disk may become Offline if it is corrupted or intermittently unavailable. A dynamic disk may also become Offline if you attempt to import a foreign (dynamic) disk and the import fails. An error icon appears on the Offline disk. Only dynamic disks display the Missing or Offline status." I am specifically wondering if, on the SAN, changing the path to the disk (such as the disk being presented to the host via a different iSCSI target IQN or a different LUN #) would cause a volume to be offlined in disk management. Thanks! Edit: I have already found two reasons why a disk might be set offline, disk signature collisions and the SAN disk policy. Bounty would be awarded to someone who can find further documented reasons related to changes in the volume's path. Disk signature collisions: http://blogs.technet.com/b/markrussinovich/archive/2011/11/08/3463572.aspx SAN disk policy: http://jeffwouters.nl/index.php/2011/06/disk-offline-with-error-the-disk-is-offline-because-of-a-policy-set-by-an-administrator/

    Read the article

  • How do I resolve an "Invalid Transaction" error saving a zone config in Brocade Web Tools?

    - by Frank Szczerba
    When trying to save zoning changes in the Zone Administration tool in Brocade Web Tools, I get the status "Failed to commit changes to fabric" and the messages window shows: --- start of commit (Enable Config) at: Fri Jul 23 2010 19:43:40 GMT+00:00 Invalid Transaction --- end of commit at: Fri Jul 23 2010 19:43:47 GMT+00:00 I've tried refreshing the config and just re-saving what is already on the switch, but can't get this message to go away.

    Read the article

  • How do you run XBMC on nvidia dual screen and stop it from taking over the keyboard and mouse?

    - by Paul Swartout
    I have set up dual screen under Ubuntu 12.04. I have a GeForce 8500 GT and have used the nVidia control panel to set up dual screen in "Separate screen mode". Here's the resulting xorg.conf # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 295.33 (buildd@zirconium) Fri Mar 30 13:38:49 UTC 2012 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 Screen 1 "Screen1" RightOf "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "Maxdata/Belinea B1925S1W" HorizSync 31.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Monitor" # HorizSync source: builtin, VertRefresh source: builtin Identifier "Monitor1" VendorName "Unknown" ModelName "CRT-1" HorizSync 28.0 - 55.0 VertRefresh 43.0 - 72.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce 8500 GT" BusID "PCI:1:0:0" Screen 0 EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce 8500 GT" BusID "PCI:1:0:0" Screen 1 EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "CRT-0: nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" # Removed Option "metamodes" "CRT-1: 1280x768 +0+0" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "CRT-1: 1360x768_60 +0+0" SubSection "Display" Depth 24 EndSubSection EndSection All well and good and I have a nice blank XWindow displayed on my TV (the 2nd monitor). I then fire up XBMC from a terminal on the PC monitor using DISPLAY=:0.1 xbmc XBMC fires up quite nicely on the TV however I can no longer use the main PC monitor / mouse / keyboard as XBMC on the TV screen seems to have focus. I was hoping to have XBMC running on the TV and let the kids use the MCE remote whilst I get on with my work on the PC monitor. Does anyone have any idea how to overcome this? I'm presuming there's some xorg.conf fun and games needed but I've no idea where to start to be honest.

    Read the article

  • If I want to dual-boot Ubuntu with another OS, what partitioning method should I use?

    - by Jay
    I have Ubuntu running as a vm in VirtualBox at the moment, but in the future, if I want to dual-boot it with Windows or another OS installed on my hard-drive, what partitioning method should I use to make room for it? 1)Manually partition my hard drive via disk management in Windows (or the equivalent in another OS), making appropriate room for the main partition upon which Ubuntu will be installed and swap space; 2)Partition via the Ubuntu installer options; 3)Use gparted or another free tool like it. I am uncertain as to why I would want to use one over the other. Lastly, am I correct to think that it would be the acme of foolishness to try to partition drives within a virtual machine (since that partitioning would be inherently limited to the limitations set upon it by the virtualization software, e.g., VirtualBox)? Thanks! P.S. Oh, and I am also planning on not modifying the MBR of Windows if I ever do dual-boot with Ubuntu, using instead a piece of free software (like easyBCD or something) to avoid the headaches of Grub being overwritten by a Windows update.

    Read the article

  • I cannot change the grub Default item from OS-1, but I can from OS-2 (dual-boot 10.04 on both)

    - by fred.bear
    My 10.04 system (OS-1) got into a tangle the other day, so I installed a second, dual-boot 10.04 (OS-2), so that I could trouble-shoot the hung system... In case it is relevant to my question, I'll mention that since I got OS-1 working again, it has shown a few battle wounds from its ordeal (.. actually the ordeal was mine ... trying to figure it all out ;) ... I lost some custom settings, but not all. (For the curious: the hangup was caused by rsync writing 600 GB to OS-1's 320 GB drive.. The destination drive was unmounted at the time, and rsync dutifully wrote directly to /media/usb_back; filling it to capacity... I have since, ammended my script :) Because the dual-boot MBR was prepared by OS-2, it is first on the grub list.. However, I want OS-1 to be the default OS to boot... From OS-1, I tried two methods to change the grub-menu's defaule OS. eg. Directly editing /etc/default/grub (then update-grub) Running 'Startup Manager' (then update-grub) Neither of these methods had any effect... so I started OS-2, and tried method 1... It worked! Why can I not change the grub menu from OS-1? .. or if it can be done, How?

    Read the article

  • ????/??????

    - by WebLogic Channel ???
    01. ?? - WebLogic Server 02. ?? - Java EE 03. ???? - WebLogic Server 04. ??! Java EE 6 05. ??? - WebLogic??? ?? ???! 06. ??? - Around WebLogic 07. ????/???? ???? WebLogic Channel ????????Java????? ????????????????! ?????? ¦ ?????URL???????? https://blogs.oracle.com/weblogic_channel/ ? https://blogs.oracle.com/wlc/ ¦ ?????WebLogic Channel powered by builder?????!! ?????????????

    Read the article

  • Mapping of memory addresses to physical modules in Windows XP

    - by Josef Grahn
    I plan to run 32-bit Windows XP on a workstation with dual processors, based on Intel's Nehalem microarchitecture, and triple channel RAM. Even though XP is limited to 4 GB of RAM, my understanding is that it will function with more than 4 GB installed, but will only expose 4 GB (or slightly less). My question is: Assuming that 6 GB of RAM is installed in six 1 GB modules, which physical 4 GB will Windows actually map into its address space? In particular: Will it use all six 1 GB modules, taking advantage of all memory channels? (My guess is yes, and that the mapping to individual modules within a group happens in hardware.) Will it map 2 GB of address space to each of the two NUMA nodes (as each processor has it's own memory interface), or will one processor get fast access to 3 GB of RAM, while the other only has 1 GB? Thanks!

    Read the article

  • WCF client proxy initialization

    - by 123Developer
    I am consuming a WCF service and created its proxy using the VS 2008 service reference. I am looking for the best pattern to call WCF service method Should I create the client proxy instance every time I call the service method and close the client as soon as I am done with that? When I profiled my client application, I could see that it is taking lot of time to get the Channel while initializing the proxy client Should I use a Singleton pattern for the client proxy so that I can use the only once instance and get rid of the re-initializing overhead? Is there any hidden problem with this approach? I am using .Net framework 3.5 SP1, basicHttp binding with little customization.

    Read the article

  • How to use BCDEdit to dual boot Windows installations?

    - by Ian Boyd
    What are the bcdedit commands necessary to setup dual boot between different installations of Windows?5 Background i recently installed Windows 8 onto a separate hard drive1. Now that Windows 8 in installed i want to dual-boot back to Windows 7. i have my two2 hard drives: So you can see that i have my two disks, with the partitions containing Windows: Windows 7: \\PhysicalDisk0 (partition 03) Windows 8: \\PhysicalDisk2 (partition 1) What i'm trying to figure out how is how to use bcdedit to instruct the thing that boots Windows that there is another Windows installation out there. Running bcdedit now, it shows current configuration: C:\WINDOWS\system32>bcdedit Windows Boot Manager -------------------- identifier {bootmgr} device partition=\Device\HarddiskVolume2 description Windows Boot Manager locale en-US inherit {globalsettings} integrityservices Enable default {current} resumeobject {ce153eb7-3786-11e2-87c0-e740e123299f} displayorder {current} toolsdisplayorder {memdiag} timeout 30 Windows Boot Loader ------------------- identifier {current} device partition=C: path \WINDOWS\system32\winload.exe description Windows 8 locale en-US inherit {bootloadersettings} recoverysequence {ce153eb9-3786-11e2-87c0-e740e123299f} integrityservices Enable recoveryenabled Yes allowedinmemorysettings 0x15000075 osdevice partition=C: systemroot \WINDOWS resumeobject {ce153eb7-3786-11e2-87c0-e740e123299f} nx OptIn bootmenupolicy Standard hypervisorlaunchtype Auto i cannot find any documentation on the difference between Windows Boot Manager and Windows Boot Loader. Documentation There is some documentation on Bcdedit: Technet: Command Line Reference - Bcdedit Technet: Windows Automated Installation Kit - BCDEdit Command Line Options Whitepaper - BCDEdit Commands for Boot Environment (Word Document) But they don't explain how edit the binary boot configuration data If i had to guess, i would think that a Windows Boot Manager instructs the BIOS what program it should run. That program would give the user a set of boot choices. That leaves Windows Boot Loader do be a particular boot choice, that represents a particular installation of Windows. If that is the case i would need to create a new Windows Boot Loader entry. This means i might want to use the /create parameter: /create Creates a new boot entry: bcdedit [/store filename] /create [id] /d description [/application apptype | /inherit [apptype] | /inherit DEVICE | /device] So i assume a syntax of: >bcdedit /create /d "The old Windows 7" /application osloader Where application can be one of the following types: Apptype Description BOOTSECTOR The boot sector application OSLOADER The Windows boot loader RESUME A resume application Unfortunately, the only documentation about osloader is "The Windows boot loader". i don't see how that can differentiate between Windows 8 on one hard drive, and Windows 7 on another. The other possible parameter when /create a boot loader is >bcdedit /create /D "Windows Vista" /device "The Quick Brown Fox" Unfortunately the documentation is missing for /device: /device Optional. If id is not set to a well-known identifier, the option that is used to specify the new boot entry as an additional device options entry. Since i did not set id to a well-known identifier, i must set /device to "the option that is used to specify the new boot entry as an additional device options entry". i know all those words; they're all English. But i have on idea what it is saying; those words in that order seem nonsensical. So i'm somewhat stymied. i don't want to be like Dan Stolts from Microsoft: I found no content that was particularly helpful when I hosed my machine by playing with BCDEdit. This post would have been ok if there was much more detail especially on the /set command OSDevice, etc. So once I got my machine fixed, I documented the solution and the information is here.... i mean, if a Microsoft guy can't even figure out how to use BCDEdit to edit his BCD, then what chance to i have? Bonus Reading BCDEdit Command-Line Options Bcdedit Server 2008 R2 or Windows 7 System Will NOT Boot After Making Changes To Boot Manager Using BCDEdit Visual BCD Editor4 Windows 7 and Windows 8 RTM Dual Boot Setup Footnotes 1 Since the Windows 8 installer would have damaged my Windows 7 install, i decided to unplug my "main" hard drive during the install. Which is a long-winded explanation of why the Windows 8 installer didn't detect the existing Windows 7 install. Normally the installer would have automatically created the required entries for dual-boot. Not that the reason i'm asking the question is important. 2 Really there's three drives, but the third is just bulk storage. The existence of a 3rd hard drive is irrelevant to the question. i only mention it in case someone wants to know why the screenshot has 3 hard drives when i only mention two. 3 i arbitrarily started numbering partitions at "zero"; not to imply that partitions are numbered starting at zero. i only mention partitions because i don't see how any boot-loader could do its job without knowing which partition, and which folder, an installation of Windows is located in. 4 i'm asking about BCDEdit. i tried Visual BCD Editor. It seems to be a visual BCD editor. That is to say that it's a GUI, but still uses the same terminology as BCDEdit, and requires the same knowledge that BCD doesn't document. 5 For simplicity sake we'll assume that all installation of Windows i want to dual-boot between are Windows Vista or later, making them all compatible with the BCDEdit and the binary boot loader. The alternative would require delving into the intricacies of the old ntloader. Nor am i asking about dual booting to Linux; or how to boot to a Virtual Hard Drive (vhd) image. Just modern versions of Windows on existing hard drives in the same machine. Note: You can ignore everything after the word Background. It's all pointless exposition to satisfy some people's need for "research effort" before they'll consider being helpful. Some people have even been known to summarily close questions unless there is research effort. Some people have been know to close questions if there is too much research effort. Some people close questions when i put the note saying that they can ignore everything after the Background out of spite. Some people are just grumpy.

    Read the article

< Previous Page | 55 56 57 58 59 60 61 62 63 64 65 66  | Next Page >