Search Results

Search found 3840 results on 154 pages for 'mister r2'.

Page 59/154 | < Previous Page | 55 56 57 58 59 60 61 62 63 64 65 66  | Next Page >

• Very large log files in IIS 7.x

  - by Neal

  Hello, I had a site stop working today and when I RDP'd into the server I saw a warning about low disk space. The first thing I checked was the inetpub folder where the log files are stored and sure enough it was huge, 40 GB huge. I do clean the files monthly but what is causing a day's worth of logging on a medium activity site (www.vbdotnetforums.com) to create 300-500 MB log files? I do have everything being logged so my SmarterStats software gives me the most info, but are there specific things I should/can turn off that is causing the most growth in these log files? Also, sure would be nice if Microsoft someday had some sort of log file management such as deleting log files after they exceed a certain size (total), X days, etc. We all have to come up with some solution to delete the old ones manually. Thanks Neal

  Read the article

• Cannot login to OpenManage Server Administrator

  - by ejel

  After freshly installed OpenManage Server Administrator from the CD that comes with my new server, Dell PowerEdge T110, I still could not figure out how to login successfully to the application. The server is running Windows 2008 SR2 Foundation and serves as a domain controller. I access its web interface locally using Firefox 3.6. On the login page and choose local system login. OMSA user's guide seems to state that I should be able to login using an Active Directory user. I tried Administrator, my_domain\Administrator, a a few combinations with the correct password. But none of them can logged in. Does Server Administrator requires any additional treatment to the user accounts, or what are the steps I missed here?

  Read the article

• Do Hyper-V guests see multiple CPUs (sockets) or multiple CPU cores when assigned more than 1 vCPU?

  - by Filip Kierzek

  I have SQL Server 2008 Express running on Hyper-V based virtual machine with two vCPU-s. I've just been reading up on SQL Server 2012 Express and noticed that it's CPU is "Limited to lesser of 1 Socket or 4 cores" (http://msdn.microsoft.com/en-us/library/cc645993(v=SQL.110).aspx) My question is how do the SQL Server 2012 limits on CPUs/Cores translate into vCPU-s? Are they "processors" or are they "cores"?

  Read the article

• ADFS 2.0 Farm - How do I perform an immediate sync

  - by Matt

  Hi, We're using ADFS 2.0 on a windows 2008 server, it's in a farm and has the default polling interval of 5 minutes. We're making a change tonight and would rather sync immediately than wait for the other guy to update, especially as we might be making multiple changes. This Technet article mentions that I can change the polling interval or do an immediate sync between my servers: http://technet.microsoft.com/en-us/library/ee913581%28WS.10%29.aspx I checked the powershell commandlets for ADFS and I can only seem to find one that let's me set the polling interval, but not perform a 1 time immediate sync Searched the usual suspects, but just can't find a ADFS-SyncMyStuffNow command... Anyone?

  Read the article

• Why do clients on Branch Sites insist on accessing SYSVOL on the HQ DC instead of the branches' RODC?

  - by pepoluan

  I'm still scratching my head over this situation... You see, we have 3 RW DCs in the HQ, and 1 RODC on every branch sites (50+ locations). During startup, a script will pull in some files from \\example.com\SYSVOL\example.com\Common\Data But we have been experiencing bandwidth overload. A traffic analysis indicated that lots of clients in the Branch Sites were trying to access the SYSVOL located in the RW DCs. E.g.: If the RW DCs are 10.1.0.15, 10.2.0.15, and 10.3.0.15, and site 'X' has a subnet of 10.27.0.0/16 (with its RODC at 10.27.0.15), clients at site 'X' seem to insist on accessing \\10.1.0.15\SYSVOL or \\10.2.0.15\SYSVOL or \\10.3.0.15\SYSVOL; they seem to be ignoring the RODC completely. What is going on here? Where should I start investigating what went wrong? BTW, I'm already using DFS-R, and replication have been going on successfully; I can put a small 'canary' file on one of the RW DCs, and within minutes all the RODCs will have successfully replicated the 'canary' file.

  Read the article

• Applocker custom extension (Java, CPL, MSC etc.)

  - by test1839

  We have a Terminal server and want to prevent users from running inappropriate software. Previously we used Software Restriction Policies for this purpose. Now, Microsoft seems to recommend Applocker instead. However we found no possibilities to add custom extensions like JAR, CPL, MSC etc. which was possible in Software Restriction Policies. Do you know how to add custom extensions to the Applocker policies in Windows 2008? Or how can we block custom script interpreters like Perl etc.?

  Read the article

• P2V Server 2008R2 with vmware converter 4.3.0 No source volumes

  - by Peter

  I'm trying to P2V a Windows Server 2008R2 to vmware vsphere 4.1 using Vmware vCenter Converter standalone 4.3. Source Box Windows Server 2008R2 24GB ram Dual Quad-Cores 1 Raid 5 drive 680 GB 3 GB "Recovery" partition 40 GB OS partition 637 GB Data partion When we try and convert using the stand alone converter and the built in vCenter converter there are no source volumes listed. Has anyone dealt with this before?

  Read the article

• SSRS2008R2 report times out, but the underlying query executes in the Management Studio

  - by Matthew Belk

  A customer of mine recently moved servers and the new server has SQL2008R2. His old server was SQL2005. The new server has substantially better CPU, RAM, and disk performance than the old, but several reports time out while executing. When I run the underlying query in the SQL Management Studio, the query executes in sub-second time. The exact error message returned via the Report Manager UI is: An error occurred within the report server database. This may be due to a connection failure, timeout or low disk condition within the database. (rsReportServerDatabaseError) Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding. It must be noted that this database is not just analytical; it's also fairly transactional, although the transaction volume is not exceptionally high. What can I do to improve the performance of the SSRS query engine? Are there settings in the data source I can adjust, or in the SSRS config files?

  Read the article

• DC on Hyper V Host

  - by Saif Khan

  I've read a few similar questions but wasn't clear. I have a small office (13) users and recently purchased a new single server (this is all I have to work with for now). Server specs Memory - 16GB Drives - 6 SCSI (2TB) PROCESSOR - DUAL QUAD I plan on making the Hyper-V host the DC and then 2 VMs, one for a file server and the other an application server. Question - since I am restricted to this single server, would it be a big issue making the Hyper-V host the domain controller? Your input greatly appreciated.

  Read the article

• ADFS 2.0 and CRM 2011 IFD - Error 403 when being redirected

  - by JohnThePro

  I'm not sure what happened here, but let me give you the rundown. I have a CRM 2011 IFD that by all accounts was functioning. Out of nowhere, I find that when being redirected to ADFS 2.0 login page by CRM, instead of seeing the login page, I get the following error: 403 - Forbidden: Access is denied. You do not have permission to view this directory or page using the credentials that you supplied. I'm not sure what is going on here. The certs are good, as best as I can tell, the logins are good. More specifically, nothing has been modified. This all worked just fine, and now it doesn't. I'm really stumped.

  Read the article

• SQL Server 2008 update License

  - by Leo

  How can I change my SQL Server 2008 license? I have the Enterprise Edition installed with a 90-day key and it will expire on 7 days. Two months ago, I purchased the final one but I don't know how to install/change to the new one. Is there a legal way to do it or I have to uninstall completely the application and reinstall it with the new license? I don't want to do that because I already have setup some stuff on the current instance. Saludos, Leo

  Read the article

• File auditing software for Windows Server 2003

  - by David Collantes

  I am looking for a program or program suite that will allow the auditing of network shared resources (specifically storage space), and render reports (who created, deleted, moved, modified files, etc). Yes, I know I can turn on auditing on Windows, but the Event Log isn't quite the "charmer" for the job.

  Read the article

• How do I apply WinHTTP proxy settings domain-wide?

  - by Oliver Salzburg

  We're already configuring Internet Explorer proxy settings through group policy and it works great. Sadly, I've recently run into multiple issues where those settings are ignored by certain services. I realized that these service have one thing in common. They use WinHTTP, which has its own proxy settings. Now I'm asking myself how to apply those across the whole domain. I realize that I could create a logon script and simply run netsh winhttp import proxy source=ie, but, from experience I know that these settings require a reboot to take effect. So this wouldn't help me at all in a logon script. So, how can I do it?

  Read the article

• How to address a recurring low temperature error seen at every boot-up?

  - by GregC

  After updating to latest controller firmware, I started receiving the following error messages: LSI 2208 ROC: Temperature sensor below error threshold on enclosure 1 Sensors 5 thru 7 Is this something I should worry about, or is it a Red Herring? Details: I have a Sans Digital NexentaSTOR 24-disk JBOD enclosure connected to LSI 9286-8e RAID-on-Chip controller with two SAS cables. Seagate ES.2 3TB SAS hard drives populate every bay in the enclosure.

  Read the article

• Server restarted while rebuilding array, what to do?

  - by user239054

  It's a HP ProLiant DL380 Generation 7, that has four hard drives, one is dead, I suppose that another one is dead too, but is there any way to force the array to rebuild again? The server has restarted while it was rebuilding an array. My windows server(2008) that is on it won't boot, it goes directly to system recovery screen. I have an image backup, would restoring it be my only option?If I restore, it will get back to regular automatically or will I have to configure something?

  Read the article

• How can I compact the VHD file with Ubuntu?

  - by AmShegar

  I use windows server 2008r2 with role Hyper-V. The guest system is Ubuntu 12.04 LTC. It is situated on the dynamic virtual hard disk. I want to compact this VHD (The real size is 50 GB, 360 GB on the disk). But I can not do this, because the Ubuntu file system is not NTFS. What do I need (gparted, sdelete, ...) for solving this problem? The main problem is that the filesystem is not NTFS, but ext4.

  Read the article

• Timesync on HyperV with CentOS 6.2

  - by WaldenL

  I've got a CentOS VM (release 6.2) running under HyperV. I have integration services installed (part of base now), and CentOS shows the current clocksource is hyperv_clocksource, however my time in the VM is about 10 minutes fast after a week of uptime. My understanding of the new IC and plugable clocksource is that this shouldn't happen any more. Is there any additional configuration necessary to get the plugable clocksource to "work?" I know there are plenty of links about setting kernel options to PIT and various stuff like that, but those all seem to pre-date the integrated clocksource support, and as I understand it shouldn't be needed anylonger. Nor should ntpd nor adjtimex.

  Read the article

• Instantiating COM object hnetcfg.fwpolicy2 on Remote Server

  - by Pavan Keerthi

  I locked my self out by inadvertently changing RDP firewall rule to use IPSec,but without completing proper steps to setup IPSec channel from my laptop to server. Luckily all wmi remoting on Server works,So I am trying to edit the rule with Powershell When I enter below code ,the COM object is invoking on local machine.How can I invoke it on remote machine? Enter-PSSession $Session $fw = New-Object -ComObject hnetcfg.fwpolicy2

  Read the article

• Error starting Hyper-V VM

  - by Peter Bernier

  I'm trying to start a VM on a new Hyper-V installation and I'm receiving the following error: The virtual machine could not be started because the hypervisor is not running. The following actions may help you resolve the problem: 1) Verify that the processor of the physical computer has a supported version of hardware-assisted virtualization. 2) Verify that hardware-assisted virtualization and hardware-assisted data execution protection are enabled in the BIOS of the physical computer. (If you edit the BIOS to enable either setting, you must turn off the power to the physical computer and then turn it back on. Resetting the physical computer is not sufficient.) 3) If you have made changes to the Boot Configuration Data store, review these changes to ensure that the hypervisor is configured to launch automatically. My machine supports virtualization at the hardware level and it is enabled in BIOS. Why am I receiving this error?

  Read the article

• How to have your DNS servers forward queries for internet names

  - by Xavier Hutchinson

  I have 2 Domain Controllers / DNS servers on Windows 2012, their IPs are 10.0.1.10 and 10.0.1.11 Another server acts as the DHCP server for clients, and sets their primary and secondary DNS to the IP addresses of the previously mentioned domain controllers / DNS servers. However I cannot resolve internet domain names, presumably as they are not hosted on the DNS servers. So my question is what do I have to do on my setup to resolve external domains? Thank you! Xavier.

  Read the article

• Cannot start `Routing and Remote Access Service` and it's dependencies

  - by ahmadali shafiee

  I tried to start Routing and Remote Access Service but I've got an error says the dependency service or group failed to start then I tried to start Remote Access Connection Manager (one of RRAS's dependencies) and the error way same. then I tried to start The Secure Socket Tuning Protocol Service but there was an error says that the the service started then stopped! the errors form event log is here: The Remote Access Connection Manager service depends on the Secure Socket Tunneling Protocol Service service which failed to start because of the following error: The operation completed successfully. The Secure Socket Tunneling Protocol Service service entered the stopped state. The Routing and Remote Access service depends on the Remote Access Connection Manager service which failed to start because of the following error: The dependency service or group failed to start. sort by date Does anyone know how can I resolve the problem?

  Read the article

• Should I be running my scheduled backups as SYSTEM or as the our domain admin?

  - by MetalSearGolid

  I have a daily backup which is scheduled through the Task Scheduler. It failed with a strange error code last night, but I was able to search and find a blog post with how to avoid the error in the future. However, one of his recommendations was to run the backups as the Administrator user of the domain. Since all of the files being backed up are local to this system, should I continue to have the backups run as SYSTEM? Or is it actually better to run it as a different user? I have been running these backups for well over a year now and have only had a handful of failures, but ironically when it does fail, the error code means it was a permissions issue (or so I read, this code seems to be undocumented by Microsoft). Thanks in advance for any insight into this. Might as well post the error code here too, in case anyone would like to share their insight on this as well, but I rarely ever get this error, so I don't care too much about it: 4294967294

  Read the article

• Suppressing / Accepting warning windows automatically in commands executed through batch file

  - by David Somach

  I am automating the uninstall of IE9 through executing the command in these instructions inside a batch file: http://answers.microsoft.com/en-us/ie/forum/ie9-windows_7/how-to-uninstall-ie9-beta-64-bit-it-is-not-in-the/863d8f3d-c4ab-43e6-9d57-e163ea3baddd The instructions say to run the command twice. The first time the command runs, I get the following error window (3 times): "Windows Package Manager Operation failed with 0x80070005 Access id denied." I click OK for each of these windows, and the rest of the script runs fine and IE8 is usable after restart. Is there a way to suppress these windows? I want this to be fully automated and these windows block the script until the user presses "OK".

  Read the article

• Removing QWERTY Keyboard Layout Permanently

  - by Phoenix

  Following the instructions in this thread, I added the Dvorak layout to the Regional and Language Options control panel, set it as the default keyboard layout and removed the US (QWERTY) layout. However, even though I removed the QWERTY layout, it still appears in my language bar, and my system defaults to it in every new window. This persists after a log-out/log-in and even a system restart. How do I remove the QWERTY keyboard layout from my system permanently? Alternatively (if outright removing QWERTY is just impossible), can I get Windows to default to Dvorak instead of QWERTY for new windows?

  Read the article

• Merge Replication with Geometry data type

  - by Puneet Jain

  The Merge Agent failed because the schema of the article at the Publisher does not match the schema of the article at the Subscriber. This can occur when there are pending DDL changes waiting to be applied at the Subscriber. Restart the Merge Agent to apply the DDL changes and synchronize the subscription. (Source: MSSQL_REPL, Error number: MSSQL_REPL-2147199398) Error converting data type varchar to geometry. (Source: MSSQLServer, Error number: 8114) Get help: http://help/8114

  Read the article

< Previous Page | 55 56 57 58 59 60 61 62 63 64 65 66  | Next Page >