Search Results

Search found 4786 results on 192 pages for 'traffic shaping'.

Page 59/192 | < Previous Page | 55 56 57 58 59 60 61 62 63 64 65 66  | Next Page >

• RDP through TCP Proxy

  - by johng100

  Hi, First time in Stackoverflow and I'm hoping someone can help me. I'm looking at a proof of concept to pass RDP traffic through a TCP Proxy/tunnel which will pass through firewalls using HTTPS. The problem has to do with deploying images to machines and so it can't be assumed that the .NET framework will be present, so C++ is being used at the deployment end of a connection. The basic system I have at present is a program which listens for client connections on a port then passes any data to a WCF service which stores it as a byte array. A deployment machine (using GSoap and C++) polls the WCF service for messages and if it finds them then passes the data onto the target server process via sockets. I know this sounds horrible, but it works for simple test clients and server passing data to and from simple test client and server programs via this WCF/C++/C# proxy layer. But I have to support traffic from RDP, VNC and possibly others, so I need a transparent proxy to do this and am wondering whether the above approach is worth pursuing. I've read up on SSH tunneling and that seems a possibility. My basic question is is it possible to tunnel RDP traffic over HTTPS using custom code. Thanks John

  Read the article

• Reduce durability in MySQL for performance

  - by Paul Prescod

  My site occasionally has fairly predictable bursts of traffic that increase the throughput by 100 times more than normal. For example, we are going to be featured on a television show, and I expect in the hour after the show, I'll get more than 100 times more traffic than normal. My understanding is that MySQL (InnoDB) generally keeps my data in a bunch of different places: RAM Buffers commitlog binary log actual tables All of the above places on my DB slave This is too much "durability" given that I'm on an EC2 node and most of the stuff goes across the same network pipe (file systems are network attached). Plus the drives are just slow. The data is not high value and I'd rather take a small chance of a few minutes of data loss rather than have a high probability of an outage when the crowd arrives. During these traffic bursts I would like to do all of that I/O only if I can afford it. I'd like to just keep as much in RAM as possible (I have a fair chunk of RAM compared to the data size that would be touched over an hour). If buffers get scarce, or the I/O channel is not too overloaded, then sure, I'd like things to go to the commitlog or binary log to be sent to the slave. If, and only if, the I/O channel is not overloaded, I'd like to write back to the actual tables. In other words, I'd like MySQL/InnoDB to use a "write back" cache algorithm rather than a "write through" cache algorithm. Can I convince it to do that? If this is not possible, I am interested in general MySQL write-performance optimization tips. Most of the docs are about optimizing read performance, but when I get a crowd of users, I am creating accounts for all of them, so that's a write-heavy workload.

  Read the article

• How do I split ONE array to two separate arrays based on magnitude size and a threshold?

  - by youhaveaBigego

  I have an array which has BIG numbers and small numbers in it. I got it from after running a log from WireShark. It is the total number of Bytes of TCP traffic. But Wireshark does not discriminate(it would actually try, and hence it will tell you the traffic stats of ALL types of traffic, but since This is how the Array look like : @Array=qw(10912980 10924534 10913356 10910304 10920426 10900658 10911266 10912088 10928972 10914718 10920770 10897774 10934258 10882186 10874126 8531 8217 3876 8147 8019 68157 3432 3350 3338 3280 3280 7845 7869 3072 3002 2828 8397 1328 1280 1240 1194 1193 1192 1194 6440 1148 1218 4236 1161 1100 1102 1148 1172 6305 1010 5437 3534 4623 4669 3617 4234 959 1121 1121 1075 3122 3076 1020 3030 628 2938 2938 1611 1611 1541 1541 1541 1541 1541 1541 1541 1541 1541 1541 1541 1541 583 370 178) When you look at these this array carefully, one thing is obvious to the human eye. There are really BIG numbers and small numbers. (Basically what I am saying is, there is the 1% class and low income class, no middle class). I want to split the array to two different arrays. That would require me to set a threshold. Array 1 should be ONLY the BIG numbers (10924534-10874126), and array 2 should be the smaller numbers (68157-178). Btw, the array is not sorted. User will NOT input the threshold, and hence should be determined smartly.

  Read the article

• Web server connection to SQL Server: Response Packet [Malformed Packet]

  - by John Murdoch

  I am seeing very, very sluggish performance between my web server (which handles HTTP web services connections) and a separate server running Microsoft SQL Server 2008. I have been capturing packet traffic on the web server trying to understand why things are running so slowly. I am using Wireshark to capture the packet traffic. The apparent problem is that the web server is sending TDS packets to the data server--each packet followed by a response from the data server with Response Packet [Malformed Packet] in the Info field. The packet sent from the web server appears to have an invalid checksum. Has anyone seen this type of problem before? Any ideas?

  Read the article

• ASP.NET request queue priority

  - by dan

  I'm on IIS 7 and .NET 4.0. My understanding is that IIS takes requests and passes them off to ASP.NET worker threads. If all the threads are in use, the request goes into a queue and is processed once a thread becomes available. If the queue goes over a certain size, all new requests get a 503 until there is room in the queue again. Is there a way to prioritize the order in which queued requests are served? For example, I have consumer traffic and infrastructure traffic coming to the same server. If there are no available threads, I'd like for the consumer requests to be served first, even if they have arrived after infrastructure requests. Basically I want to replace the request queue with a priority queue. Is this possible with IIS?

  Read the article

• Cisco ASA 5510 ASDM: Setting up multiple public static ip addresses on a single interface and route

  - by ssjaken

  HI, i have a cisco ASA 5510 using ASDM version 6.3 We have a webserver that is been written very specifically and i was given super direct "DO NOT DEVIATE" directions. This server has to get traffic from 3 different PUBLIC ip's that we own. (our isp gave use a block of 12 static addresses) on 4 different ports. there are the directions i was given externalIP1:22 - 172.17.5.50:22 - SSH externalIP1:443 - 172.17.5.50:23040 - SIT externalIP2:443 - 172.17.5.50:33040 - STAGE externalIP3:443 - 172.17.5.50:43040 - PROD My first question is, using ASDM (my contract employer demands i use ASDM over CLI) how do i get three public addresses to work on one interface. We are authenticating on PPPoE. I know create a virtual interface with the static address but when i do i cannot ping the address from another offsite machine. secondly, where would i put the traffic redirect in. would i go ahead and create ACL's or just make NAT routes. Thanks.

  Read the article

• Apache Redirect to Jboss SSL

  - by Rick

  I'm trying to have an SSL Connection to an Apache server on port 443 which I want to use to proxy connections to a JBoss server on a different port. The SSL certificates sit on the Jboss server not on the Apache server. Is it possible to redirect HTTPS traffic from Apache to the Jboss Server and have the JBoss server do the SSL handshake? The Apache server must be able to redirect HTTPS traffic for two different URLS. One for a secure site. The other for access to web services. By the way I'm using it mutual authentication, if that makes any difference. What does the Apache config file need to contain? or are there any good example of this out there? Thanks

  Read the article

• Recommended ADSL/ADSL2 router that supports PPTP VPN dial-out, 802.11n and gigabit ethernet?

  - by Throlkim

  I'm looking for a new router to provide a VPN tunnel for my home network. My plan is to pass all internet traffic over a PPTP VPN provided by the router, which should ensure that the connection stays alive and only passes traffic over that protocol. I'm normally quite a fan of Draytek routers, and their 2710n does seem to feature VPN dial-out but it lacks Gigabit ports (though I can make do with that if the VPN support is good enough). Has anyone got any suggestions or personal experience in a similar setup? I'm happy to consider anything that supports dd-wrt (as I believe that supports VPN-out, though I may be wrong). Bonus points for models available in the UK.

  Read the article

• Cisco SR520w FE - WAN Port Stops Working

  - by Mike Hanley

  I have setup a Cisco SR520W and everything appears to be working. After about 1-2 days, it looks like the WAN port stops forwarding traffic to the Internet gateway IP of the device. If I unplug and then plug in the network cable connecting the WAN port of the SR520W to my Comcast Cable Modem, traffic startings flowing again. Also, if I restart the SR520W, the traffic will flow again. Any ideas? Here is the running config: Current configuration : 10559 bytes ! version 12.4 no service pad no service timestamps debug uptime service timestamps log datetime msec no service password-encryption ! hostname hostname.mydomain.com ! boot-start-marker boot-end-marker ! logging message-counter syslog no logging rate-limit enable secret 5 <removed> ! aaa new-model ! ! aaa authentication login default local aaa authorization exec default local ! ! aaa session-id common clock timezone PST -8 clock summer-time PDT recurring ! crypto pki trustpoint TP-self-signed-334750407 enrollment selfsigned subject-name cn=IOS-Self-Signed-Certificate-334750407 revocation-check none rsakeypair TP-self-signed-334750407 ! ! crypto pki certificate chain TP-self-signed-334750407 certificate self-signed 01 <removed> quit dot11 syslog ! dot11 ssid <removed> vlan 75 authentication open authentication key-management wpa guest-mode wpa-psk ascii 0 <removed> ! ip source-route ! ! ip dhcp excluded-address 172.16.0.1 172.16.0.10 ! ip dhcp pool inside import all network 172.16.0.0 255.240.0.0 default-router 172.16.0.1 dns-server 10.0.0.15 10.0.0.12 domain-name mydomain.com ! ! ip cef ip domain name mydomain.com ip name-server 68.87.76.178 ip name-server 66.240.48.9 ip port-map user-ezvpn-remote port udp 10000 ip ips notify SDEE ip ips name sdm_ips_rule ! ip ips signature-category category all retired true category ios_ips basic retired false ! ip inspect log drop-pkt no ipv6 cef ! multilink bundle-name authenticated parameter-map type inspect z1-z2-pmap audit-trail on password encryption aes ! ! username admin privilege 15 secret 5 <removed> ! crypto key pubkey-chain rsa named-key realm-cisco.pub key-string <removed> quit ! ! ! ! ! ! crypto ipsec client ezvpn EZVPN_REMOTE_CONNECTION_1 connect auto group EZVPN_GROUP_1 key <removed> mode client peer 64.1.208.90 virtual-interface 1 username admin password <removed> xauth userid mode local ! ! archive log config logging enable logging size 600 hidekeys ! ! ! class-map type inspect match-any SDM_AH match access-group name SDM_AH class-map type inspect match-any SDM-Voice-permit match protocol sip class-map type inspect match-any SDM_ESP match access-group name SDM_ESP class-map type inspect match-any SDM_EASY_VPN_REMOTE_TRAFFIC match protocol isakmp match protocol ipsec-msft match class-map SDM_AH match class-map SDM_ESP match protocol user-ezvpn-remote class-map type inspect match-all SDM_EASY_VPN_REMOTE_PT match class-map SDM_EASY_VPN_REMOTE_TRAFFIC match access-group 101 class-map type inspect match-any Easy_VPN_Remote_VT match access-group 102 class-map type inspect match-any sdm-cls-icmp-access match protocol icmp match protocol tcp match protocol udp class-map type inspect match-any sdm-cls-insp-traffic match protocol cuseeme match protocol dns match protocol ftp match protocol h323 match protocol https match protocol icmp match protocol imap match protocol pop3 match protocol netshow match protocol shell match protocol realmedia match protocol rtsp match protocol smtp extended match protocol sql-net match protocol streamworks match protocol tftp match protocol vdolive match protocol tcp match protocol udp class-map type inspect match-any L4-inspect-class match protocol icmp class-map type inspect match-all sdm-invalid-src match access-group 100 class-map type inspect match-all dhcp_out_self match access-group name dhcp-resp-permit class-map type inspect match-all dhcp_self_out match access-group name dhcp-req-permit class-map type inspect match-all sdm-protocol-http match protocol http ! ! policy-map type inspect sdm-permit-icmpreply class type inspect dhcp_self_out pass class type inspect sdm-cls-icmp-access inspect class class-default pass policy-map type inspect sdm-permit_VT class type inspect Easy_VPN_Remote_VT pass class class-default drop policy-map type inspect sdm-inspect class type inspect SDM-Voice-permit pass class type inspect sdm-cls-insp-traffic inspect class type inspect sdm-invalid-src drop log class type inspect sdm-protocol-http inspect z1-z2-pmap class class-default pass policy-map type inspect sdm-inspect-voip-in class type inspect SDM-Voice-permit pass class class-default drop policy-map type inspect sdm-permit class type inspect SDM_EASY_VPN_REMOTE_PT pass class type inspect dhcp_out_self pass class class-default drop ! zone security ezvpn-zone zone security out-zone zone security in-zone zone-pair security sdm-zp-in-ezvpn1 source in-zone destination ezvpn-zone service-policy type inspect sdm-permit_VT zone-pair security sdm-zp-out-ezpn1 source out-zone destination ezvpn-zone service-policy type inspect sdm-permit_VT zone-pair security sdm-zp-ezvpn-out1 source ezvpn-zone destination out-zone service-policy type inspect sdm-permit_VT zone-pair security sdm-zp-self-out source self destination out-zone service-policy type inspect sdm-permit-icmpreply zone-pair security sdm-zp-out-in source out-zone destination in-zone service-policy type inspect sdm-inspect-voip-in zone-pair security sdm-zp-ezvpn-in1 source ezvpn-zone destination in-zone service-policy type inspect sdm-permit_VT zone-pair security sdm-zp-out-self source out-zone destination self service-policy type inspect sdm-permit zone-pair security sdm-zp-in-out source in-zone destination out-zone service-policy type inspect sdm-inspect ! bridge irb ! ! interface FastEthernet0 switchport access vlan 75 ! interface FastEthernet1 switchport access vlan 75 ! interface FastEthernet2 switchport access vlan 75 ! interface FastEthernet3 switchport access vlan 75 ! interface FastEthernet4 description $FW_OUTSIDE$ ip address 75.149.48.76 255.255.255.240 ip nat outside ip ips sdm_ips_rule out ip virtual-reassembly zone-member security out-zone duplex auto speed auto crypto ipsec client ezvpn EZVPN_REMOTE_CONNECTION_1 ! interface Virtual-Template1 type tunnel no ip address ip virtual-reassembly zone-member security ezvpn-zone tunnel mode ipsec ipv4 ! interface Dot11Radio0 no ip address ! encryption vlan 75 mode ciphers aes-ccm ! ssid <removed> ! speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0 station-role root ! interface Dot11Radio0.75 encapsulation dot1Q 75 native ip virtual-reassembly bridge-group 75 bridge-group 75 subscriber-loop-control bridge-group 75 spanning-disabled bridge-group 75 block-unknown-source no bridge-group 75 source-learning no bridge-group 75 unicast-flooding ! interface Vlan1 no ip address ip virtual-reassembly bridge-group 1 ! interface Vlan75 no ip address ip virtual-reassembly bridge-group 75 bridge-group 75 spanning-disabled ! interface BVI1 no ip address ip nat inside ip virtual-reassembly ! interface BVI75 description $FW_INSIDE$ ip address 172.16.0.1 255.240.0.0 ip nat inside ip ips sdm_ips_rule in ip virtual-reassembly zone-member security in-zone crypto ipsec client ezvpn EZVPN_REMOTE_CONNECTION_1 inside ! ip forward-protocol nd ip route 0.0.0.0 0.0.0.0 75.149.48.78 2 ! ip http server ip http authentication local ip http secure-server ip http timeout-policy idle 60 life 86400 requests 10000 ip nat inside source list 1 interface FastEthernet4 overload ! ip access-list extended SDM_AH remark SDM_ACL Category=1 permit ahp any any ip access-list extended SDM_ESP remark SDM_ACL Category=1 permit esp any any ip access-list extended dhcp-req-permit remark SDM_ACL Category=1 permit udp any eq bootpc any eq bootps ip access-list extended dhcp-resp-permit remark SDM_ACL Category=1 permit udp any eq bootps any eq bootpc ! access-list 1 remark SDM_ACL Category=2 access-list 1 permit 172.16.0.0 0.15.255.255 access-list 100 remark SDM_ACL Category=128 access-list 100 permit ip host 255.255.255.255 any access-list 100 permit ip 127.0.0.0 0.255.255.255 any access-list 100 permit ip 75.149.48.64 0.0.0.15 any access-list 101 remark SDM_ACL Category=128 access-list 101 permit ip host 64.1.208.90 any access-list 102 remark SDM_ACL Category=1 access-list 102 permit ip any any ! ! ! ! snmp-server community <removed> RO ! control-plane ! bridge 1 protocol ieee bridge 1 route ip bridge 75 route ip banner login ^CSR520 Base Config - MFG 1.0 ^C ! line con 0 no modem enable line aux 0 line vty 0 4 transport input telnet ssh ! scheduler max-task-time 5000 end I also ran some diagnostics when the WAN port stopped working: 1. show interface fa4 FastEthernet4 is up, line protocol is up Hardware is PQUICC_FEC, address is 0026.99c5.b434 (bia 0026.99c5.b434) Description: $FW_OUTSIDE$ Internet address is 75.149.48.76/28 MTU 1500 bytes, BW 100000 Kbit/sec, DLY 100 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Full-duplex, 100Mb/s, 100BaseTX/FX ARP type: ARPA, ARP Timeout 04:00:00 Last input 01:08:15, output 00:00:00, output hang never Last clearing of "show interface" counters never Input queue: 0/75/23/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue: 0/40 (size/max) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 1000 bits/sec, 0 packets/sec 336446 packets input, 455403158 bytes Received 23 broadcasts, 0 runts, 0 giants, 37 throttles 41 input errors, 0 CRC, 0 frame, 0 overrun, 41 ignored 0 watchdog 0 input packets with dribble condition detected 172529 packets output, 23580132 bytes, 0 underruns 0 output errors, 0 collisions, 2 interface resets 0 unknown protocol drops 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier 0 output buffer failures, 0 output buffers swapped out 2. show ip route Gateway of last resort is 75.149.48.78 to network 0.0.0.0 C 192.168.75.0/24 is directly connected, BVI75 64.0.0.0/32 is subnetted, 1 subnets S 64.1.208.90 [1/0] via 75.149.48.78 S 192.168.10.0/24 is directly connected, BVI75 75.0.0.0/28 is subnetted, 1 subnets C 75.149.48.64 is directly connected, FastEthernet4 S* 0.0.0.0/0 [2/0] via 75.149.48.78 3. show ip arp Protocol Address Age (min) Hardware Addr Type Interface Internet 75.149.48.65 69 001e.2a39.7b08 ARPA FastEthernet4 Internet 75.149.48.76 - 0026.99c5.b434 ARPA FastEthernet4 Internet 75.149.48.78 93 0022.2d6c.ae36 ARPA FastEthernet4 Internet 192.168.75.1 - 0027.0d58.f5f0 ARPA BVI75 Internet 192.168.75.12 50 7c6d.62c7.8c0a ARPA BVI75 Internet 192.168.75.13 0 001b.6301.1227 ARPA BVI75 4. sh ip cef Prefix Next Hop Interface 0.0.0.0/0 75.149.48.78 FastEthernet4 0.0.0.0/8 drop 0.0.0.0/32 receive 64.1.208.90/32 75.149.48.78 FastEthernet4 75.149.48.64/28 attached FastEthernet4 75.149.48.64/32 receive FastEthernet4 75.149.48.65/32 attached FastEthernet4 75.149.48.76/32 receive FastEthernet4 75.149.48.78/32 attached FastEthernet4 75.149.48.79/32 receive FastEthernet4 127.0.0.0/8 drop 192.168.10.0/24 attached BVI75 192.168.75.0/24 attached BVI75 192.168.75.0/32 receive BVI75 192.168.75.1/32 receive BVI75 192.168.75.12/32 attached BVI75 192.168.75.13/32 attached BVI75 192.168.75.255/32 receive BVI75 224.0.0.0/4 drop 224.0.0.0/24 receive 240.0.0.0/4 drop 255.255.255.255/32 receive Thanks in advance, -Mike

  Read the article

• Route additional network through Sonicwall site-to-site VPN

  - by Brandon

  I have a sonicwall site to site vpn. At one of the sites there is another Cisco vpn to another site. I need to route the traffic for the cisco vpn through the site to site from the other sonicwall site. Site A - 10.10.0.0 /16 network Site B - 192.168.1.0 /24 Sonicwall, A cisco vpn is on 192.168.1.226 address and has routes the 10.10.0.0 network to Site A. Site C - 192.168.2.0 /24 Sonicwall Site A-B VPN is working Site B-C VPN is working I need to get Site C to transmit the 10.10.0.0 traffic over the VPN to site B and then out the Cisco device.

  Read the article

• Is HAProxy able to pass SSL requests to Apache + mod_ssl?

  - by Josh Smeaton

  Most of the documentation I've read regarding HAProxy and SSL seems to suggest that SSL must be handled before it reaches HAProxy. Most solutions focus on using stunnel, and a few suggest Apache + mod_ssl infront of HAProxy. Our problem though, is that we use Apache as a reverse proxy to a number of other sites which use their own certificates. Ideally what we'd like, is for HAProxy to pass all SSL traffic to Apache, and let Apache handle either the SSL or reverse proxying. Our current setup: Apache Reverse Proxy -> Apache + mod_ssl -> Application What I'd like to do: HAProxy -> Apache Reverse Proxy -> Apache + mod_ssl -> Application Is it possible to do this? Is HAProxy capable of forwarding SSL traffic to be handled by a server BEHIND it?

  Read the article

• (Tough) Security Queston about ISP companies

  - by buyrum

  I want to ask a question. One ISP was criticized for it's low security conditions, and when i heard this i started to think: If one gets an unauthorized access to the mainframe computer / internal network of the ISP, then wouldn't he be able to sniff all the traffic ? Because the ISP is providing the internet connection for the user so all traffic that sends and transmits a user travels via the ISP, right ? What security solutions (talking about computer security) are being implemented by other ISP in order to protect themselves and their users ? If all the connections are being sent via a special computer, how secure it is and how can be we sure that it's really safe ? And what kind of computers are those who serve as backbones for the ISP ? Thank you in advance for your help.

  Read the article

• Is bonding mode=5 a solution against MAC flapping?

  - by Yuri

  There is two are interconnected Cisco WS-2950T. By the one GBIC port on first switch connected a first NIC of bonding interface, and by the one GBIC port on second switch connected a second NIC of bonding interface. Of course the both switches sees the bonding MAC-address only on one interface (eg it is GBIC on first switch) and all incoming traffic for bonding interface passes through this GBIC. But in "mode=5" all outgoing traffic are distributed between the all interfaces that make bond. In this case, the packets will be dropped from the second switch and anyway will going through the first switch? Or the division will be working?

  Read the article

• IPcop Multiple WAN Subnets

  - by obsidian

  We have an IPcop firewall and have had no issues with it. We've had a block of 10 IP addresses from our colocation provider and have been able port forward from those to internal servers as needed. We've recently needed additional IPs and the colocation provider issued an additional block of 10. The problem: The 10 new IP addresses issued are in a different subnet with a different gateway. The question: How do I add the new gateway into IPcop? How do I make it so that any outbound traffic in response to any inbound traffic from a new IP go back out through the new gateway? I attempted to add a static route via the console using the following command: route add -net x.x.x.x gw x.x.x.x netmask 255.255.255.192 I also added the new IPs as aliases and setup port forwarding as I've done with the existing IP block. However, when I attempt to access a web server from an external workstation, it just times out. Thanks in advance for your assistance.

  Read the article

• Fortigate - Accessing a Virtual Server address from several interfaces

  - by Jeremy G

  I am setting up a new application in its own DMZ on our Fortigate 300C firewalls. I have defined a load-balancing configuration for part of the application, and this works fine for traffic coming in from our internal network. However, I would also like this application to be reachable from other DMZs, for inter-application traffic, and from the SSL VPN interface. I can't seem to define the required policy, and it seems this is due to Virtual Servers being bound to the client interface on the Fortigate rather than the server interface (and so my virtual IP is not accessible from any of these other interfaces) Does anyone have an idea how I might go about this ? I guess I could create other virtual IPs for each interface, but this gets complicated to handle as clients need to change the address they use depending on how they are connecting. Thanks, Jeremy G

  Read the article

• IIS7 failover cluster across datacenters

  - by Scott

  Hello, I have servers in two different datacenters with each datacenter getting static IPs. What I would like to do is setup the servers as IIS7 servers and allowing them to failover from datacenter to datacenter with little (or preferably) no interruption. Servers on both sides are running Windows Server 2008 x64 with IIS7 (or 7.5 if needed). I am interested in how to point DNS traffic to the new datacenter without manual human intervention. For example: Datacenter A: IP: 192.168.1.115 Servers: Server 2008 x64 w/ IIS 7 Datacenter B: IP: 192.168.1.220 Servers: Server 2008 x64 w/ IIS 7 Other information: Domain Name: Example.org Domain DNS: 192.168.1.115 If Datacenter A connectivity went down (broken service line, etc.) how does the traffic know to route to Datacenter B on 192.168.1.220? Thanks, Scott

  Read the article

• linksys Rvo16 redundant link config

  - by Adeodatus

  Hi All I have been given an RVO16 to play with. I'm multihomed and I'd like to set it up so that my primary, highest bandwidth link receives all traffic and the other connection is a hot spare basically. I want them both online but only the primary 1 used until it goes down then all traffic should automatically failover to the secondary link. Those of you that have played on an RVO16, can I do this and if so, how? I imagine I'd have it act as a router and pad the route on one so that the other is never used unless the primary is down. How? Thanks all.

  Read the article

• Copying files from NAS to NAS drives

  - by user1001421

  Very simple question. I've got 2 NAS drive that are "wire" connected via a router. If I have a wireless laptop and request a large amount of data be copied from one NAS drive to the other, does the network traffic go direct from the one drive to the other, going via the wired network, or does the network traffic go via my laptop, if you see what I mean. IE. From the NAS drives wired network, to the wireless network and then back to the wired network. Is this a common bottle-neck when copying a large amount of data? And if so, is there a way to avoid it. Thanks.

  Read the article

• QoS / PBR Routing Questions

  - by Bernard

  I have a 50Mbs Satellite link and a 10Mbs Microwave link supplying a very remote location. Behind these links, I have a 6,400 seat network - with about 3,000 signed in at any one time. My goal is to send all of the Voip traffic (Google Chat, Magic Jack, Skype, Speakeasy, Vonage, Vonage PC, Yahoo) through the microwave link which has 100ms latency. The rest of the traffic can utilize any remaining bandwidth of the microwave link with excess being diverted to the higher latency (600ms) satellite connection. The problem I've had so far is that most automatic routing configurations weigh the bandwidth heavily for preference - and I'm only wanting latency considered. Additionally, I don't know if this can even be handled with the routing hardware I have at my disposal (Cisco 3640, 3745, & 3845). Any recommendations (or really good starting points) would be greatly appreciated.

  Read the article

• Routing based on source address in Windows Server 2008 R2

  - by rocku

  Hi, I'm implementing a direct routing load balanced solution using Windows Server 2008 R2 as back-end server. I've configured a loopback interface with the external IP address. This works, I am receiving packets with the external IP address and respond to them appropriately. However our infrastructure requires that traffic which is being load-balanced should go through a different gateway then any other traffic originating from the server, ie. updates etc. So basicly I need to route packets based on source address (external IP) to another gateway. The built-in Windows 'route' command allows routing based on destination address only. I've tried setting a default gateway on the loopback interface and mangled with weak/strong host send/receive parameters on the interfaces, however this didn't work. Is there any way around this, possibly using third party tools?

  Read the article

• Tunnel only one program (UDP & TCP) through another server

  - by user136036

  I have a windows machine at home and a server with debian installed. I want to tunnel the UDP traffic from one (any only this) program on my windows machine through my server. For tcp traffic this was easy using putty as a socks5 proxy and then connecting via ssh to my server - but this does not seem to work for UDP. Then I setup dante as a socks5 proxy but it seems to create a new instance/thread per connection which leads to a huge ram usage for my server, so this was no option either. So most people recommend openvpn, so my question: Can I use openvpn to just tunnel this one program through my server? Is there a way to maybe create a local socks5 proxy on my windows machine and set it as a proxy in my program and only this proxy then will use openvpn? Thank you for your ideas

  Read the article

• Route from Cisco ASA over site to site VPN

  - by Wookie321

  I want to be able to push f/w logging traffic to a server at a remote site. This server is accepting syslog traffic on port 514. In the ASA I've configured it to use this server as a syslog server. The Cisco f/w's inside interface address is 10.0.0.1 and I want to route over the link to an address of 192.168.1.1. The vpn is up and working between sites, and local clients at each site can access resources etc. How would I go about setting up the route from the f/w to this remote server only?

  Read the article

• No communication on my VLAN?

  - by Donovan

  I am using a Netgear FSM7328S switch and have designated ports 19-24 as being part of VLAN # 3. I designated them all as untagged because I do not want them to switch traffic to any other port on the switch. I also removed them from the default, untagged, VLAN 1. My issue is that none of the ports 19-24 will communicate with eachother. My laptop plugged in with wireshark shows no switched traffic what so ever. Have I configured it wrong? Thanks, D

  Read the article

• Running multiple services on Port 443, Tunnel SSH over HTTPS

  - by lajuette

  Situation: I want to tunnel SSH sessions through HTTPS. I have a very restrictive firewall/proxy which only allows HTTP, FTP and HTTPS traffic. What works: Setting up a tunnel through the proxy to a remote linux box that has a sshd listening at port 443 The problem: I have to have a web server (lighty) running at port 443. HTTPS traffic to other ports is forbidden by the proxy. Ideas so far: Set up a virtual host and proxy all incoming requests to localhost: (e.g. 22) $HTTP["host"] == "tunnel.mylinux.box" { proxy.server = ( "" => (("host" => "127.0.0.1", "port" => 22)) ) } Unfortunately this won't work. Am i doing something wrong, or is there a reason, that this won't work?

  Read the article

• IP tables gateway

  - by WojonsTech

  I am trying to make an iptables gateway. I ordered 3 dedicated server from my hosting company all with dual nics. One server has been given all the ip addresses and is connected directly to the internet and has its other nic connected to a switch where the other servers are all connected also. I want to setup iptables so for example the ip address 50.0.2.4 comes into my gateway server it fowards all the traffic to a private ip address using the second nic. This way the second nic can do what ever it needs and can respond back also. I also want it setup that if any of the other servers needs to download anything over the inernet it is able to do so and by using the same ip address that is used for its incomming traffic. Lastly I would like to be able to setup dns and other needed networking stuff that i maybe not thinking about.

  Read the article

< Previous Page | 55 56 57 58 59 60 61 62 63 64 65 66  | Next Page >