Search Results

Search found 4786 results on 192 pages for 'traffic shaping'.

Page 63/192 | < Previous Page | 59 60 61 62 63 64 65 66 67 68 69 70  | Next Page >

• Allow access to printer between interfaces on Cisco ASA5510

  - by Jonas Stensved

  I have a Cisco ASA5510 where we have to separate networks on two separate interfaces. The networks have and should have nothing to do with each other except that network B needs to access a printer on network A. Network A: 192.168.137.0/24 Printer: 192.168.137.20 Network B: 192.168.0.0/24 I've added an incoming rule from Network A to the Printer IP in the ASDM interface but clients can't print. Our previous router was configured to let traffic through so the clients on Network B is already configured so it think it should work if the traffic is allowed. How do I let clients on Network B communicate with the printer?

  Read the article

• Using a AWS EC2 Server to host a busy website and I need to set up a loadbalancing

  - by Philip Isaacs

  My company has one EC2 server running on AWS with a MYSQL-DB and Apache on the same instance. This one instance hosts a website built on PHP Zend Framework. The site runs like crap when it starts to get busy with a lot of traffic so I'm looking for some advice on how to set up something that can handle the load better. My first question is should I move the mysql DB on to a separate EC2 instance or perhaps use AWS's RDS service which looks like a nice option. I'm sort of new to some of this but I'm guessing I'll need at least two EC2 instances for serving the website from and some sort of load balancing mechanism to distribute traffic. But maybe not, I'm not sure. Also what are some best practices for how to replicate the data so that they stay in sync on both instances? Okay I know these are a lot of questions. But I don't know where to start so any advice will help.

  Read the article

• Need to know who is hogging my bandwidth?

  - by Dev

  I have an ethernet connection to my iMac and with Internet sharing I am broadcasting the wireless network from my mac rather than using a wireless router. I use it to connect other devices wirelessly to the internet. But this makes all the traffic flow through my iMac. I wanted a way to analyze the traffic so that I know what connected devices are hogging the bandwidth at a given time and from which websites? I installed wireshark for mac and played around a little but it seems like an overkill when you first look at it. Can someone please help with few instructions to get what I need or any other way other than using wireshark? Thanks Dev.

  Read the article

• pptp VPN, routing

  - by Adrian

  Details: eth0 = current internet port pptp1 = VPN connection, if I connect to my provider, he give me an IP address, which is accessible from the internet. This is what I need. I want to connect through this IP back to my PC. I want to keep my primary internet connection (eth0) on my PC for all traffic, but route traffic to VPN for specified application/or port, to access application/port from the IP, which I given from the pptp provider. Huhh? Difficult but, it is possible? If yes, how? Incoming port will be always: 33340 Outgoing port can be change, but usually it is 33330

  Read the article

• Simulating network latency for localhost connection on Windows 7

  - by nitro2k01

  I need to simulate network latency to a program running on the local computer, connecting to a local service. Thus far I have tried dummynet (a windows build of ipfw) which I got working after some trial and error. While it generally works, I can't seem to get it to filter localhost traffic. Even after adding a rule from any to any which affects external traffic, this makes no difference for local connections. I would appreciate if anyone knows how to simulate local latency using dummynet or a different tool. The tool should be able to simulate latency generically in IP packets, (TCP and UDP) and not be protocol specific.

  Read the article

• Windows Server 2008 constantly spamming external IP's on outbound TCP port 445

  - by RSXAdmin

  Hi Server Fault, I have a Windows Server 2008 box running as a Domain Controller. I have noticed in my Cisco ASA firewall logs that this box is continuously sending out (like a thousand requests a second) requests on TCP port 445 to external hosts. I have made an effort to deny this outbound traffic from getting on the internet (using the ASA), however I would like these requests to stop from even occurring at all. I have tried disabling TCP/IP over NetBIOS. I have even turned on Windows Advanced Firewall on the box itself to block outbound 445 but the ASA still detects this particular traffic hitting it. I have other DC's and similar type boxes which are not behaving the same way as this box. Is this normal? Is there a way to stop this spamming? Have I been infected? Thank you universe.

  Read the article

• SQUID Transparent SSL proxy (no intercept)

  - by user974896

  I know how to have squid work as a transparent proxy. You put it into transparent mode then use your router or IPTABLES to forward port 80 to the squid port. I would like to do the same for SSL. Every guide I see mentions setting up keys on the squid server. I do not want squid to actually decrypt the SSL traffic then establish a connection with the server, rather I would like squid to simply forward the SSL traffic as is. The only thing I would like to do is be able to check the SSL request for any offending IPs and drop the packets if the destination is one of them.

  Read the article

• OpenBSD Routing Problem

  - by Ozkan SENOVA

  I am running OpenBSD on a network appliance hardware. It has 5 NICs. I want to give different IP's in same subnet to 3 nics. Eg: em0: 192.168.1.5 em1: 192.168.1.90 em2: 192.168.1.56 I make the necessary configuration with ifconfig, all interfaces works as expected when all the ethernet ports are plugged in to switch. But there is something wrong in routing. If I connect to 192.16.1.5 via any service(http, smtp etc.), traffic goes over link#3. If I unpug the cable from em2 I can't reach any IP's binded on device. Is there any way to route traffic over different links in this IP configuration?

  Read the article

• BIG IP - HTTPS Health Monitor setup

  - by djo

  I have a Web site that we have setup a health monitoring pages so we can take our servers in and out of the Big-IP as we see fit. Now we have just moved onto Big-IP and the issue I have hit is that you setup Health Monitors for port 80 and 443, now the 80 check works fine but when I to get the 443 check to look at our file it fails. Now I am aware as I am hitting the this page on the IP address over HTTPS is going to cause a cert error but I would have guessed that BIG-Ip would have been setup just to accept the cert and carry on with the check. Is what I am wanting to do possible? Also is there a way of just using a HTTP monitor for HTTPS? Because if port 80 has stopped sending traffic then if i use the same monitor for 443 it will stop traffic to that. Any help would be great! Thanks

  Read the article

• 2 DSL lines...any benefit?

  - by EJB

  I have verizon DSL in my office, I put DSL in about a year ago for $29.95 month...I added a new phone line recently and it was cheaper to actually get it bundled with DSL so now I have two DSL lines...my plan was to shut the first one off when my 1 year contract comes up (in September). A couple of times DSL has gone out on one line so I just used the other, which is a nice redundancy to have - but it doesn't happen often. (I unplugged one line and plugged in the other) Question is, is there any way to use both DSL lines together so that 1) I can increase bandwidth and effective speed might increase (is that possible?) or 2) have them both on and connected someway so that traffic on my network would just use either one, and if one went down the traffic would route automatically? If I can either increase speed by having two, or at a minimum get some automatic redundancy, I see no reason to keep both on.... Thanks!

  Read the article

• route to vpn based on destination

  - by inquam

  I have a VPN connection on a Windows 7 machine. It's set up to connect to a server in US. Is it possible, and if so how, to setup so that .com destinations uses the vpn interface and .se destinations uses the "normal" connection? Edit (clarification): This is for outbound connections. I.e. the machine conencts to a server on foo.com and uses the VPN and the machine connects to bar.se and uses the "normal" interface. Let's say foo.com has an IP filter that ensures users are located in USA, if I go through the VPN I get a US ip and everything is fine. But tif all traffic goes this way the bar.se server that has a IP filter ensuring users are in Sweden will complain. So I want to route the traffic depending on server location. US servers through VPN and others through the normal interface.

  Read the article

• Badwidth-Hogging Linux Server Causing Trouble

  - by BlairHippo

  We have a Linux server (2.6.28-11-generic #42-Ubuntu) that's misbehaving on a client site, gobbling up an entirely unacceptable percentage of the client's bandwidth, and we're trying to figure out what the heck it's doing. And the guy who had the sysadmin skillset has yet to be replaced. We're at a loss for what could be causing all that network traffic, and need to figure it out SOON. What log files should I be looking at to find this information? What analysis tools would you recommend for this task? Please note that I'm not looking for a tool that will allow me to analyze FUTURE traffic. The client is on the verge of shutting the machine off entirely; I need to figure out what it's been doing with the data I already have, if that's at all possible. My thanks in advance for helping a development monkey play sysadmin.

  Read the article

• Routing between 2 different subnets on 2 different interfaces in SonicOS

  - by Chris1499

  I'm having a bit of a problem allowing traffic between two of my subnets. Here's the structure I've built. The X0 interface has our windows server on it and it handles DHCP/DNS, etc. X1 has the WAN connection. The Sonicwall is handling DHCP on X2. The X3 interface is connected to a different vlan on the 48 port switch. The Sonicwall is handling DHCP on this network as well. So here's what i want to do. The network on X2 is for our guest wireless; i don't want it to be able to access any of the other networks, just the internet, so i that all blocked in the firewall. No issues there. The X3 network is going to be for programmable controllers, and needs to be able to access the X0 network where our computers are. This is where my problem is. I'm not able to get between the 192.168.2.xxx and the 192.168.1.xxx on interfaces X0 and X3 respectively. I have these rules set up in the firewall. The Lan Primary Subnet is the 192.168.2.0 on X0. So if i'm not mistaken, this will allow traffic between the two through the firewall. Now this is where I'm a little confused. Do i need to use NAT to get the traffic from X0 to go to X3 (and vice versa), or a static route, or both? Currently i have both, though i doubt they're done correctly (also in screenshot). I've tried to ping between the two without luck. Any advice, or if you see what's wrong with my setup, is much appreciated. If you need some more information, let me know. Thanks all! EDIT: So i found that i don't neither either NAT or a static route, that the setting in the firewall is enough. I can now ping from the 192.168.1.xxx network, however i can't access the server on the 192.168.2.xxx network. When i try to access i get "An error occured while reconnecting to Z: to server Microsoft Windows Network: The local device name is already in use. This connection has not been restored. What am i missing?

  Read the article

• No blocked ports on internal interface of ASA

  - by blsub6

  I have a cisco ASA 5505 with three interfaces: Internal (100), DMZ (50) and External (0). The internal has a IPSEC VPN tunnel to my internal network I couldn't log in to my domain because of all of the port restrictions and such. I tried monitoring the traffic through the interface, seeing what it's blocking and then unblocking those ports but even then it didn't work completely correctly I finally just added a rule to permit any ip traffic from any network to any network on the internal interface and, of course, it worked fine But is that good security practice? Should I be blocking ports on an interface that's internal and over a VPN with the highest security level?

  Read the article

• How can I port forward over a VPN NAT?

  - by Charlie

  I have a multi-site VPN currently running with pfSense boxes and currently using OpenVPN. However I can change the OS and VPN type if need be. The main router has a 10.13.0.0/16 subnet and a series of public IPs For example, a branch has a 10.12.1.0/24 subnet How can I port forward NAT traffic on a public IP of the main router to a server behind the NAT of the second? So for instance port 95 on a public IP assigned to the main router forwards to 10.12.1.102 on the other router. Is this even possible? Currently my setup works great but only for intertnal traffic

  Read the article

• nginx hashing on GET parameter

  - by Sparsh Gupta

  I have two Varnish servers and I plan to add more varnish servers. I am using a nginx load balancer to divide traffic to these varnish servers. To utilize maximum RAM of each varnish server, I need that same request reaches same varnish server. Same request can be identified by one GET parameter in the request URL say 'a' In a normal code, I would do something like- (if I need to divide all traffic between 2 Varnish servers) if($arg_a % 2 == 0) { proxy_pass varnish1; } if($arg_a % 2 == 1) { proxy_pass varnish2; } This is basically doing a even / odd check on GET parameter a and then deciding which upstream pool to send the request. My question are- What is the nginx equivalent of such a code. I dont know if nginx accepts modulas Is there a better/ efficient hashing function built in with nginx (0.8.54) which I can possibly use. In future I want to add more upstream pools so I need not to change %2 to %3 %4 and so on Any other alternate way to solve this problem

  Read the article

• Are there any tools for monitoring individual Apache virtual hosts in real-time?

  - by Dave Forgac

  I'm looking for a way to monitor and record Apache traffic, separated by virtual host. I am currently using Munin to capture this and other data for the entire server however I can't seem to find a way to do this by vhost. This link describes using a module called mod_watch which is apparently no longer in development: http://www.freshnet.org/wordpress/2007/03/08/monitoring-apaches-virtualhost-with-munin/ The file that is listed as being compatible with Apache 2.x is reported to have problems with missing vhosts an reporting data correctly. Does anyone know of a reliable way to determine real-time traffic per vhost? If I can find this it should be easy enough to write a new Munin plugin.

  Read the article

• How to determine what program send the packet recorded in Wireshark?

  - by Tono Nam

  I was taking some tutorials on Wireshark in order to analyze the packets sent and received when talking to a web server for purposes of learning. When I start listening/recording packets in Wireshark, there where so many packages being recorded (700 packages per minute). Is it normal to have that much traffic if I have all the programs that will cause traffic such as all browsers, log me in, dropbox, goto meeting, etc., closed? In order to try to solve the problem I am analyzing random packets. Take for instance this filter: I just selected a random IP: 74.125.130.99. So how can I know from what program those packets where created? Also how can I get more info about that communication bwtween my computer (192.168.0.139) and that server (74.125.130.99)? I just selected a random IP from the Wireshark capture. There are also other IPs that I have no idea why they are communicating with my computer. How can I figure that out?

  Read the article

• Dreamweaver not connecting RDC

  - by thomas

  I am trying to use Dreamweaver to Remote Desktop Connect into a computer where a website is hosted. Normal traffic to this server is routed to another domain, but when accessed by IP (it is my understanding) the traffic never hits any sort of nameserver request, and so stays there. This server is set up so that the only way I can access it is RDC. I can connect using an RDC program, but when I attempt to use Dreamweaver, I get a vague error. The desired action could not be completed because an unexpected client/server communication error occurred. I have Web URL as http://my.ip.number/directory And in the settings panel, I have Host name: my.ip.number Port: 3388 Host directory: C:\Program Files (x86)\directory/directory Username: user Password: ••••••• What could be preventing Dreamweaver form connecting? Thanks! SERVER DETAILS It is a virtual server Windows SERVER 2008 R2 Standard Service Pack 1

  Read the article

• monitoring TCP/IP performance on Solaris

  - by Andy Faibishenko

  I am trying to tune a high message traffic system running on Solaris. The architecture is a large number (600) of clients which connect via TCP to a big Solaris server and then send/receive relatively small messages (.5 to 1K payload) at high rates. The goal is to minimize the latency of each message processed. I suspect that the TCP stack of the server is getting overwhelmed by all the traffic. What are some commands/metrics that I can use to confirm this, and in case this is true, what is the best way to alleviate this bottleneck?

  Read the article

• Set Up Port-Forwarding on Netgear N300 Router

  - by Smitty

  I have a Netgear N300 router that has DynDNS.org as a preset DDNS option. After setting it up it (unsurprisingly) sent traffic directly to my router. I'm essentially using this to connect remotely to my home (virtual) machine/s. From what I've read, it seems like I need to set up port forwarding. I tried forwarding "all" inbound traffic to a specific IP but that just didn't work. What am I doing wrong? Also, I just noticed I get this error after applying the settings: "The specified port(s) are being used by other configurations. Please check your configurations of Remote Management, Port forwarding, Port Triggering, UPnP Port Mapping table, RIP, and Internet connection type"

  Read the article

• Load balancers, multiple data centers and url based routing

  - by kunkunur

  There is one data center - dc1. There is a business need to setup another data center - dc2 in another geography and there might be more in the future say dc3. Within the data center dc1: There are two web servers say WS1 and WS2. These two webservers do not share anything currently. There isnt any necessity foreseen to have more webservers within each dc. dc1 also has a local load balancer which has been setup with session stickiness. So if a user say u1 lands on dc1 and if the load balancer decides to route his first request to WS1 then from there on all u1's requests will get routed to WS1. Local load balancer and webservers are invisible to the user. Local load balancer listens to the traffic on a virtual ip which is assigned to the virtual cluster of webservers ws1 and ws2. Virtual ip is the ip to which the host name is resolved to in the DNS. There are no client specific subdomains as of now instead there is a client specific url(context). ex: www.example.com/client1 and www.example.com/client2. Given above when dc2 is onboarded I want to route the traffic between dc1 and dc2 based on the client. The options that I have found so far are. Have client specific subdomains e.g. client1.example.com and client2.example.com and assign each of them with the virtual ip of the data center to which I want to route them. or Assign www.example.com and www1.example.com to first dc i.e. dc1 and assign www2.example.com to dc2. All requests will first get routed to dc1 where WS1 and WS2 will redirect the user to www1.example.com or www2.example.com based on whether the url ends with /client1 or /client2. I need help in the following If I setup a global load balancer between dc1 and dc2 do I have any alternative solutions. That is, can a global load balancer route the traffic based on the url ? Are there drawbacks to subdomain based solutions compared to www1 solution? With www1 solution I am worried that it creates a dependency on dc1 atleast for the first request and the user will see that he is getting redirected to a different url.

  Read the article

• Routing based on source address in Windows Server 2008 R2

  - by rocku

  I'm implementing a direct routing load balanced solution using Windows Server 2008 R2 as back-end server. I've configured a loopback interface with the external IP address. This works, I am receiving packets with the external IP address and respond to them appropriately. However our infrastructure requires that traffic which is being load-balanced should go through a different gateway then any other traffic originating from the server, ie. updates etc. So basicly I need to route packets based on source address (external IP) to another gateway. The built-in Windows 'route' command allows routing based on destination address only. I've tried setting a default gateway on the loopback interface and mangled with weak/strong host send/receive parameters on the interfaces, however this didn't work. Is there any way around this, possibly using third party tools?

  Read the article

• Should a MobiTex service with a highly resilient website offer content over WAP?

  - by makerofthings7

  I'm trying to offer services over the MobiTex network (also see wiki) and want to reduce double-work. I'm trying to understand if it is a good idea to WAP enable my website. Given that WAP usage is increasing (since MMS is a hybrid of SMS + WAP), and the FCC has required every operator in the 700Mhz range to implement it I'd like to fully understand if there are benefits to the technology for certain critical applications. For example, if GPRS allows SMS traffic, voice, and Data, presumably they are handled by different Gateways. If there is another gateway for WAP traffic I would think that it would act as a backup if the data gateway was overloaded. Are there resiliency benefits to using WAP on a critical website? i.e. Content delivery (push or pull)

  Read the article

• How to configure something like "Reflexive ACL" on OpenBSD?

  - by Earlz

  My U-Verse modem has something called "Reflexive ACL" described as Reflexive ACL: When IPv6 is enabled, you can enable Reflexive Access Control Lists to deny inbound IPv6 traffic unless this traffic results from returning outgoing packets (except as configured through firewall rules). This seems like a pretty good way to keep from having to maintain a firewall on each computer behind my router that gets handed an IPv6 address. It sounds about like a NAT, which for my small home network is all I want right now. Now my modem sucks as a router though, so I'm in the process of configuring an OpenBSD router to do that. I've got IPv6 supported and all that and my OpenBSD router will hand out IPv6 addresses by rtadvd. Now I want to keep people from having instant access to my local network through IPv6. How would I best do something like Reflexive ACL with pf in OpenBSD 5.0?

  Read the article

< Previous Page | 59 60 61 62 63 64 65 66 67 68 69 70  | Next Page >