Search Results

Search found 6432 results on 258 pages for 'wireless adapter'.

Page 59/258 | < Previous Page | 55 56 57 58 59 60 61 62 63 64 65 66  | Next Page >

• How to fix additional STA driver installation error on 12.04

  - by nibl

  I have a Broadcom BCM4313 wireless driver. It worked fine under 11.04 and the upgrade to 11.10 also went smoothly. The 12.04 upgrade has broken the wireless connection. I've seen several posts about this and all presume you can activate the STA drivers, but that's where it fails on this machine. The log is in /var/log/jockey.log: WARNING: modinfo for module wl failed: ERROR: modinfo: could not find module wl WARNING: /sys/module/wl/drivers does not exist, cannot rebind wl driver DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted (repeat of last error several times) Any ideas how to proceed?

  Read the article

• How to use CLEAR USB WiMax in Ubuntu (host) and Windows XP (guest) using VirtualBox

  - by bithacker

  I'm trying to use CLEAR Motorola WiMax USB in Ubuntu as there is no support for Linux as yet. I've installed Windows XP as guest in Ubuntu and the version I'm using is 3.2.2. USB is connecting fine in Windows XP but I can't use internet in Ubuntu. Can you please tell me how to do it. Here is the configuration that could help you guys. Thanks in advance. I'm using Two Network Adapters. Network Adapter 1: PCnet-FAST III (NAT) Adapter 2: PCnet-FAST III (Host-only adapter, 'vboxnet0') ipconfig [on Guest windowsXP] Windows IP Configuration Ethernet adapter Local Area Connection: PCnet-FAST III (NAT) Connection-specific DNS Suffix . : IP Address. . . . . . . . . . . . : 10.0.2.15 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 10.0.2.2 Ethernet adapter Local Area Connection 3: PCnet-FAST III (Host-only adapter, 'vboxnet0') Connection-specific DNS Suffix . : IP Address. . . . . . . . . . . . : 192.168.56.101 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : Ethernet adapter Local Area Connection 2: Connection-specific DNS Suffix . : CLEAR Motorola USB IP Address. . . . . . . . . . . . : 10.168.242.33 Subnet Mask . . . . . . . . . . . : 255.255.192.0 Default Gateway . . . . . . . . . : 10.168.192.2 IFCONFIG [on Host Ubuntu] (Ethernet) eth0 Link encap:Ethernet HWaddr 00:14:22:b9:9d:76 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:16 eth1 (Wireless) Link encap:Ethernet HWaddr 00:13:ce:f0:9b:0d inet6 addr: fe80::213:ceff:fef0:9b0d/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:1 errors:0 dropped:5 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:84 (84.0 B) Interrupt:17 Base address:0xe000 Memory:dfcff000-dfcfffff lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:2292 errors:0 dropped:0 overruns:0 frame:0 TX packets:2292 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:171952 (171.9 KB) TX bytes:171952 (171.9 KB) vboxnet0 Link encap:Ethernet HWaddr 0a:00:27:00:00:00 inet addr:192.168.56.1 Bcast:192.168.56.255 Mask:255.255.255.0 inet6 addr: fe80::800:27ff:fe00:0/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:137 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:21174 (21.1 KB)

  Read the article

• Where are Wireless Profiles stored in Ubuntu

  - by LonnieBest

  Where does Ubuntu store profiles that allow it to remember the credentials to private wireless networks that it has previously authenticate to and used? I just replaced my Uncle's hard drive with a new one and installed Ubuntu 10.04 on it (he had Ubuntu 9.10 on his old hard drive. He is at my house right now, and I want him to be able to access his private wireless network when he gets home. Usually, when I upgrade Ubuntu, I have his /home directory on another partition, so his wireless profile to his own network persists. However, right now, I'm trying to figure out which .folder I need to copy from his /home/user folder on the old hard drive, to the new hard drive, so that he will be able to have wireless Internet when he gets home. Does anyone know with certainty, exactly which folder I need to copy to the new hard drive to achieve this?

  Read the article

• Wi-Fi Connection Issues.. tried a lot.. pls help

  - by nikvana

  I am posting a question for the first time, do not know coding and am relatively new to ubuntu, but a quick learner. I have an Acer Aspire One D270 notebook that came originally with Windows 7 starter installed. I have removed that and installed Ubuntu 12.04 I have chronic issues with connecting to the wi-fi. I figure it is due to issues with the driver(s) I think this is the driver I have- BCM4313 802.11bgn Wireless Network Adapter (on entering this in the terminal- lshw -C) I also installed the software Windows wireless drivers and it shows currently installed drivers as blank- but when i choose install new drivers, it asks me to select inf file which I do not know where to find. Please help with this, coders. Thanks a ton

  Read the article

• Concurrent wireless and wired network

  - by Stew Megaw

  Hi, I am concerned with maintaining a wireless and wired network connection on my laptop. Basically I can change the metric on each interface so that Windows prefers one connection over the other. I am wondering is following scenario possible.... Some applications uses the wireless while other applications use the wired... I want Internet Explorer (only) to use the wireless connection while Outlook and everything else uses the wired connection. Perhaps adding some lines to the routing table might work? - Adding the ip addresses of websites I want to view via the wireless connection? Many Thanks in advance for any replies!

  Read the article

• Wifi worked after reinstalling the driver, but why did it stopped working in the first place?

  - by Ankit

  I was having an issue with connecting to my wifi router since yesterday; could see the router in the wireless networks available but the router was not authenticating my password. I tried unblocking the hardware switches though non was blocked. Finally on discussing with the ISP i gave a re-installation of the wireless driver a try; and to my surprise that worked.(I was assuming faulty wifi router). So as per the subject of the question; I am very curious to know what actually happened that prevented me to connect to my wifi. Any logs that I could see to confirm the cause of this suspicious activity.

  Read the article

• how to download and install from the internet >> skype and realplayer

  - by ADAM

  i had corrupted win7 by dead blue screen and stopped rebooting or installing or safe mode. just death i installed linux unubtu one i still unable to install my wireless stick modem for surfing internet wirelessly form my provider vividwireless i don't know where or how to download porg and app from the net like real player and skype and others and to intall them. even i cannot find them after download. can i revive and reboot or fix my dead win7 os from linux. i can connect internet from wireless network in the neighborhood linksys!! what is linksys anyway? how to use linux ubuntu same way like windows? ie. insalling, using cd rom for installation and downloading and cleaning history and cache and system restore? please email me to: [email protected] any help..step by step many thanks

  Read the article

• Access Domain over Wireless

  - by William

  I have an active directory server and all hard wired clients connect perfectly fine. However any wireless clients do not recognize that they are connected to the domain, despite the dns server being appropriately set to the domain controller for both wired and wireless connections. Also - both wired and wireless clients are on the same subnet. I am using a Verizon food actiontec router. What am I missing? For instance, this is the same computer connected first via an Ethernet cable and second via the wireless.

  Read the article

• 13.10 suspend kills wifi

  - by ser

  i tried to post to this thread Hardware wireless switch has no effect after suspend and 13.10 upgrade for if i understand their question i am having the same problem but the answer option won't work for me and maybe i am not supposed to post there anyway, i dunno lol...ack when i come out of suspend, the wireless is disconnected with the only way to get it to reinitialize/be recognized is to do a full restart. at first i thought it was my gnome shell (for lock screen disappeared there with 13.10) but when i switched to the default ubuntu it's still doing it and it's kinda driving me nuts for i have to reopen all my files and browsers/tabs/windows everytime. i'm only a geekling so i don't know how to show the terminal stuff the above asker shows, but it sounds like the same issue and it only started with 13.10 upgrade a few days ago. any help would be much appreciated!!! thanks so much ser

  Read the article

• Joining two routers together, but I have no access to the second router, although I know it's IP address and Gateway

  - by JohnnyVegas

  I have temporarily moved into a rented apartment for 4 months, which has wireless. The trouble I am having is that the access points here are wifi only and no RJ45 and I need to use RJ45 to connect some equipment that I am working with. I have purchased an RT-N66U and installed Tomato (shibby ver. 1.28) and successfully replaced the existing access point, but now I want to enable the access point that I have replaced as it links wirelessly to 3 others. Can I plug in a cable from the access point to my RT-N66U and get it to access the internet via my router? I have no access to the existing wireless access point, and don't want to reset it as it's not mine. There is another router situated in the roof somewhere which I also have no access to, but it's supplying my RT-N66U internet and I most definitely have a double-nat, which although isn't the best way of doing things I am limited with what I can do. Any suggestions on routing tables, vlans etc would be helpful, but I have no experience in these fields before - but I know the tomato firmware can cater for this. My router is set to IP 10.0.1.1 and dhcp is 10.0.1.100-200 The wireless access point address was 192.168.1.2 but this was assigned by the router in the roof which has the address 192.168.1.1. There is a cable from this router going to a wall socket which I now have my RT-N66u attached to via the WAN port. I understand it's scruffy and it isn't the way to do things but I have tried to ask for the admin details but as the wireless network is looked after by a third party and nobody knows their details I am stuck with this dilemma. I could buy three wireless access points and replace the existing but this isn't what I want to do, and although I have installed plenty of DD-WRT wireless repeater bridges they simply don't work here for some unknown reason. The phone line here is very noisy too and I don't have the rights to install ADSL in a building that isn't mine, and 3G coverage isn't good enough either. Thanks for your time

  Read the article

• I can't connect to my network, except in safe mode

  - by eidylon

  My laptop cannot connect to my network all of a sudden except in safe mode. When it boots, it will show the networks available in the tray popup, but if I click connect on any, it says "Unable to connect" and the troubleshooter is useless. Shortly thereafter all the networks disappear. I have tried removing IPv6 support as I have seen that cause problems. No joy. I've also tried removing the wireless network adapter in Device Manager and reinstalling it, also no joy. I've also tried attaching a USB wireless adapter, and it has the same problem. If I boot in safe mode, then it has no problems at all. Three other devices in the house connect fine, so I am pretty sure it is nothing to do with the router. Any ideas what to check next? I am running Win7 Ultimate on a 2GHz Quadcore with 8GB RAM with a Broadcom 802.11n wireless card. EDIT: RE wired connections: What is very weird is that if i plug in a wired connection, then not only does it connect via the wired connection, but the wireLESS also starts working perfectly. And a soon as I unplug the wire, then the wireLESS stops working again! So it seems the wireless is right now working only in safe-mode, or when a wired connection is also plugged in.

  Read the article

• XP/Intel wirelss only showing 'hpsetup' ad-hoc network that isn't there

  - by ewall

  Trying to help my friend with her work XP laptop, which recently stopped seeing any wireless SSIDs except the SSID 'hpsetup' (presumably from a wireless-enabled HP printer). Relevant information: The laptop is a Lenovo T500 (Centrino 2 chipset) with XP SP3. The network adapter is Intel WiFi Link 5300 AGN (built-in). The latest version (13.5) of the Intel drivers only are installed, not the Intel config software, so XP is using the Wireless Zero-Config manager. The wireless router is a NetGear WGR614 v7 with 802.11b/g. The SSID is broadcasting, and all the other laptops in the house can see and connect to it. On the laptop, I have tried repairing the network connection, disabling power management, turning off 802.11a & n radio, and more... but it didn't help. Some of the wireless settings are managed by Group Policy from her office (I get the "At least one of your changes was not applied successfully to your wireless configuration" message). It is enforced to connect to "Access point (infrastructure) networks only". The real kicker is that my laptop does not an SSID named 'hpsetup' here, but it can see several broadcasted SSIDs including the one we want, while my friend's laptop doesn't see any SSID except 'hpsetup'. Any suggestions?

  Read the article

• Powershell Win32_NetworkAdapterConfiguration Not "seeing" PPP Adapter

  - by Ben

  I am trying to get the IP of a PPP VPN network connection, but Win32_NetworkAdapterConfiguration does not seem to "see" it. If I interrogate all adapters using my script, it will see everything but the PPP VPN adapter. Is there a specific filter or something I need to enable, or do I need a different class? My Script: $colItems = Get-wmiobject Win32_NetworkAdapterConfiguration foreach ($objItem in $colItems) { Write-Host Description: $objItem.Description Write-Host IP Address: $objItem.IPAddress Write-Host "" } Script Output: Description: WAN Miniport (SSTP) IP Address: Description: WAN Miniport (IKEv2) IP Address: Description: WAN Miniport (L2TP) IP Address: Description: WAN Miniport (PPTP) IP Address: Description: WAN Miniport (PPPOE) IP Address: Description: WAN Miniport (IPv6) IP Address: Description: WAN Miniport (Network Monitor) IP Address: Description: Intel(R) PRO/Wireless 3945ABG Network Connection IP Address: 192.168.2.5 Description: WAN Miniport (IP) IP Address: ipconfig /all output: PPP adapter My VPN: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : My VPN Physical Address. . . . . . . . . : DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 10.1.8.12(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.255 Default Gateway . . . . . . . . . : 0.0.0.0 DNS Servers . . . . . . . . . . . : 10.1.1.3 10.1.1.2 Primary WINS Server . . . . . . . : 10.1.1.2 Secondary WINS Server . . . . . . : 10.1.1.3 NetBIOS over Tcpip. . . . . . . . : Enabled Wireless LAN adapter Wireless Network Connection: Connection-specific DNS Suffix . : Belkin Description . . . . . . . . . . . : Intel(R) PRO/Wireless 3945ABG Network Connection Physical Address. . . . . . . . . : 00-3F-3C-22-22-22 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 192.168.2.5(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : 25 May 2010 20:33:19 Lease Expires . . . . . . . . . . : 22 May 2020 20:33:17 Default Gateway . . . . . . . . . : 192.168.2.1 DHCP Server . . . . . . . . . . . : 192.168.2.1 DNS Servers . . . . . . . . . . . : 192.168.2.1 NetBIOS over Tcpip. . . . . . . . : Enabled Thanks in advance, Ben

  Read the article

• Hack a Wireless Doorbell for Customizable Ring Tones

  - by Jason Fitzpatrick

  When it comes to door bells, why limit yourself to a simple bell toll when you could be alerted to visitors by the Super Mario Bros. theme? This customizable doorbell hack brings ring tones to your front door. Check out the video above to see it assembled and in action, then hit up the link below for the wiring diagrams and step-by-step instructions. How to Add Custom Ringtones to a Wireless Doorbell [via Hacked Gadgets] How To Use USB Drives With the Nexus 7 and Other Android Devices Why Does 64-Bit Windows Need a Separate “Program Files (x86)” Folder? Why Your Android Phone Isn’t Getting Operating System Updates and What You Can Do About It

  Read the article

• Printing to a printer connected to a wireless router

  - by mspencer

  I have a Netgear WNDR4500 wireless router which allows me to print wirelessly to a printer connected to it via a USB cable. However, the software used to print to it only works for Windows and OS X. I've seen the question Printing to a printer attached to a network USB hub, and tried the instructions it gave using my router's IP address, but when I print a test page it says copying data then says printer is in use. In the printer queue window it says not connected. How can I print to the printer using Ubuntu? Thanks.

  Read the article

• Wireless always disconnect

  - by Silas

  I upgraded my Ubuntu 10.10 for Ubuntu 12.04. I have a Emachines E625 With Ubuntu 12.04 my wireless always disconnects every 10 sec. It didn't do that with 10.10. Here is my config: Linux sylvain-eMachines-E625 3.2.0-30-generic #48-Ubuntu SMP Fri Aug 24 16:54:40 UTC 2012 i686 athlon i386 GNU/Linux total used free shared buffers cached Mem: 1759 1425 333 0 46 925 -/+ buffers/cache: 452 1306 Swap: 1788 0 1788 02:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01) 05:00.0 Ethernet controller: Atheros Communications Inc. AR8132 Fast Ethernet (rev c0) I will really enjoy an answer to solve this problem. Thank you in advance! Silas

  Read the article

• Ubuntu stops letting wired or wireless mice click through after a short while

  - by Jonathan Chan

  Hi! I have a very confusing problem that renders Ubuntu near unusable. Whenever I try to use any wired or wireless mouse with my Ubuntu 10.10 install, clicks stop going through - often times, this blockage of clicks happens in less than a minute. Sometimes no clicks are accepted, other times, clicks are accepted in certain windows and denied in others. The end result is the same, and I am forced to resort to using the keyboard to navigate. If anyone could help me resolve this problem, I would be very appreciative, as it would finally allow me to try Ubuntu. Thanks!

  Read the article

• USB (wireless) keyboard not recognised during install

  - by Jon C

  I'm just trying my first trip into the world of Ubuntu. Trying to install from CD on to a virgin machine, I get the initial language prompt, select 'English', I get the Ubuntu install options, select 'Install Ubuntu Server'. I'm then presented with a further 'Language for installation' screen. At this point my keyboard stops working...! Some specifics: I'm using a Logitech wireless USB keyboard - it works fine on another machine; Machine is a ProLiant Micorserver N54L (No PS/2 ports); BIOS USB support is set to Legacy. Any ideas...? Thanks, Jonathan

  Read the article

• Unwittingly activate wrong wireless driver and now cannot activate the correct one

  - by Sumeth Chaochuti

  I just installed Kubuntu 10.10 on my MacBook 3,1 and found no wireless connection. Using KPackageKit I activated Broadcom b43 because it had already been selected for me. When I subsequently tried to activate Broadcom STA, however, I was returned with an error. After reading Jockey log I removed the wrong driver and reinstalled all drivers so that I can activate the correct one. It hasn't work even though KPackageKit now shows that I have installed: bcmwl-kernel-source bcmwl-modaliases broadcom-sta-common broadcom-sta-source According to the log it appears as if there are conflicts but I don't know how to rectify it. I'm completely new to the platform, just started using Kubuntu 2 days ago. I'll appreciate any advice anyone can give. Thanks.

  Read the article

• Wireless mouse temporarily freezes when resume from standby

  - by R Pennese

  I have been getting a very annoying problem since recently in Ubuntu 12.04, probably due to another update that did more bad than good... When I resume from sleep on my Lenovo Thinkpad T420, my wireless laser mouse (Logitech M705) freezes at regular intervals (15.20 seconds) for 5 seconds then works again. This happens regardless if the computer is on battery or on AC power. How do I debug this? I am getting tired of the fact that my system gets more and more unstable over time while it should be the opposite...

  Read the article

• Daemon Tools Lite Error- Unable to add adapter

  - by Lirik

  I just got a ThinkPad T510 with Windows 7 Professional and I installed Daemon Tools Lite, but I keep getting an error when I run it: Unable to add adapter. I tried starting it as an administrator, but I got the same problem. Does anybody know how to fix this?

  Read the article

• Too many Tunnel Adapter Interfaces

  - by Tomas Lycken

  If I open a command prompt on my machine and type ipconfig /all, I see lots of Tunnel adapter Local Area Connection* 9: Media state . . . . . . . . . . . . . : Media disconnected Connection-specific DNS Sufficx . . . : Description . . . . . . . . . . . . . : Microsoft 6to4 Adapter #5 Physical address. . . . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP Enabled. . . . . . . . . . . . . : No Autoconfiguration Enabled . . . . . . : Yes In fact, they're so many that my "real" adapters are pushed out of the stack, and can't be seen anymore. Is there any flag I can use on ipconfig to hide all virtual interfaces? Or is there some other way around this problem? Since they always say "Media disconnected" I suppose disabling could be an option, but if possible I'd rather not turn any functionality off. I just want to control what output I get from ipconfig. Also, I know these are related to IPv6 stuff. However, most of what I find on google merely states what these are, and that they're harmless - nothing about hiding/removing them.

  Read the article

• Ubuntu doesn't detect drives conected to LSI "Host Bus Adapter"

  - by dvrecmfo

  I purchased LSI SAS 9300-4i Host Bus Adapter, from card bios I can see that it detected all hard drives connected to it, but from ubuntu I can't see them. What I've tried: Installed the driver provided here http://www.lsi.com/products/host-bus-adapters/pages/lsi-sas-9300-4i.aspx#tab/tab3 (I tried both LINUX_RH_SL_OEL_CTX_MPT_GEN3_C0_Phase2.0-3.00.00.00-1 and Linux_Driver_RHEL5-6_SLES10-11_P1) lspci | grep -i lsi 07:00.0 Serial Attached SCSI controller: LSI Logic / Symbios Logic SAS3004 PCI-Express Fusion-MPT SAS-3 (rev 02)

  Read the article

• USB TO DB9 Adapter

  - by Ioudas

  I have a USB-to-DB9 adapter, no FCC serial visible anywhere, that I need drivers for. I can't seem to get any relevant info searching on Google. Does anyone have any good ideas where I might be able to get a lead on some drivers? I'll even upload a picture of it.

  Read the article

• Does DisableTaskOffload disable all related LAN Adapter settings?

  - by vfclists

  I have been getting problems disabling Checksum Offload in a lot of LAN adapters manually. Does setting the DisableTaskOffload value in the registry disable all of the related parameters regardless of LAN card? ie is the use of the LAN adapter offload capabilities controlled by Windows itself?

  Read the article

< Previous Page | 55 56 57 58 59 60 61 62 63 64 65 66  | Next Page >