Search Results

Search found 22668 results on 907 pages for 'command prompt'.

Page 590/907 | < Previous Page | 586 587 588 589 590 591 592 593 594 595 596 597  | Next Page >

• Host is unreacheble with static networking configuration via /etc/network/interfaces while GUI NetworkManager is ok

  - by Riccardo

  I have some trouble setting-up the network interface using the static IP configuration. I run ubuntu 12.04 kernel 3.11.0-22 with the back-ports enabled. I followed these instructions from help.ubuntu.com but there seems to exist some conflict between the GUI approach (NetworkManager) and the command line approach. $ sudo nano /etc/network/interfaces auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 10.1.1.50 gateway 10.1.1.10 netmask 255.255.255.0 dns-nameservers 192.168.3.45 192.168.8.10 $ sudo /etc/init.d/networking restart I than try to ping for example google.com ping -c 3 www.google.com the response is that the host is unreachable. The icon on the top right of the desktop says: wired network disconnected. If I work using the GUI approach (Edit Connections and so on...) all works great. Can same one explain to me where I wrong? $ ifconfig eth0 eth0 Link encap:Ethernet HWaddr 90:e6:ba:07:4a:77 inet addr:10.1.1.50 Bcast:10.1.1.255 Mask:255.255.255.0 inet6 addr: fe80::92e6:baff:fe07:4a77/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:39619 errors:0 dropped:0 overruns:0 frame:0 TX packets:18520 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:19030895 (19.0 MB) TX bytes:2768769 (2.7 MB) $ netstat -rn Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 10.1.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0

  Read the article

• shutil.copy script not working

  - by yuvi

  I wrote a script in python that was supposed to copy a bunch of files to system32 and then install them through cmd. I can do it manually but I'm trying to make it automatic. This is what I wrote: Import shutil Import os L = ['file1.type', 'file2.type'.... ] dst = "C:\Windows\system32" For f in L: shutil.copy(f, dst) os.system("cmd command yada yada...") And it doesn't work. I tried doing it step by step with idle and it worked fine. All the files are in the same directory as the script. What am I missing here?

  Read the article

• Terminal.app fonts broken on Mac Snow Leopard

  - by Fabio

  About an year ago I installed gnome fonts on my MacBook Pro and I use them for Terminal.app Today I was using Terminal with three windows open and suddenly the app has quit (I don't know if I accidentally pressed command+q) but when I reopened the application fonts looks strange. I had a screenshot taken before the accident I did the same screenshot now and here's the result I don't know what's happened, I tried to reinstall the fonts, restarted the computer, but with no luck. One more thing, I use an external screen, I read some posts regarding font issues with external monitors but I had this monitor before this accident and everything worked fine until now. Please help me to solve this because my eyes were used to that font and now it looks weird to see this different font

  Read the article

• Reliable alert dialogs from the shell

  - by intuited

  I'd like to have a message pop up in response to various system events, mostly in order to be able to set reminders for myself from a shell session. There are a few ways to do this; zenity seems to be the most polished. However, I've found at least two problems with zenity: Messages do not appear on all workspaces. I tried using the gtk option --screen to control this, but they just appear on the current workspace regardless. So if I am switching workspaces as the message comes up, I will not see it. Messages do not appear above all other windows. Specifically, if I am using guake, a new zenity message will appear below the guake window and I won't be able to see it. I tried a few other apps a while back. Both gmessage and xmessage exhibited problem 1; gmessage also exhibited problem 2. I did find that kalarm, which can be scripted from the command line, worked acceptably, but I'm trying to avoid running the KDE stack if possible, and would prefer something lightweight with zenity's versatility. It seems that it might be possible to arrange for these problems to be resolved by setting the WM_CLASS, but I'm in a bit over my head there. It might also be possible to make modifications to the window after it launches with a script, but again I'm not sure where to look for resources on that.

  Read the article

• Why my pendrive is showing used space when it is actually empty?

  - by Deb

  I recently got some virus in my pendrive. I removed them using Microsoft security Essential and cleared all data. But it is showing that 47.1MB of space is being used. Is it due to the virus affect? There is no hidden files on the pendrive and I have also set Show hidden files in the Folder and search option. Permission is also granted to everyone. I also use disk management to check any issue but nothing found. I think formatting will solve the the problem but in that case I will not be able to see the data. Is there any command to see the files in cmd or any other way?

  Read the article

• Problem with glaux.h locating

  - by Rodnower

  Hello, I try to compile code, that beggins with: #include<stdlib.h> #include<GL/gl.h> #include<glaux.h> with command: cc -o test test.c -I/usr/local/include -L/usr/local/lib -lMesaaux -lMesatk -lMesaGL -lXext -lX11 -lm But one of errors I got is: test.c:3:18: error: glaux.h: No such file or directory Then I try: yum provides glaux.h but yum find anything. Before all I installed Mesa with: yum install mesa* So, can anyone tell me from where I can get the header file? Thank you for ahead.

  Read the article

• Agent admitted failure to sign using the key.

  - by Delirium tremens

  .ssh dir is chmodded 700, id_rsa.pub 600, id_rsa 400. I ran ssh-keygen -t rsa, imported key to launchpad and ran bzr branch lp:unity, but got error message: Agent admitted failure to sign using the key. Permission denied (publickey). bzr: ERROR: Connection closed: Unexpected end of message. Please check connectivity and permissions, and report a bug if problems persist. auth.log: Nov 28 20:23:13 ubuntu sudo: deltrem : TTY=pts/0 ; PWD=/home/deltrem/Documentos/repositories ; USER=root ; COMMAND=/usr/bin/bzr branch lp:unity Nov 28 20:39:01 ubuntu CRON[2959]: pam_unix(cron:session): session opened for user root by (uid=0) Nov 28 20:39:01 ubuntu CRON[2959]: pam_unix(cron:session): session closed for user root Nov 28 20:41:04 ubuntu gnome-screensaver-dialog: gkr-pam: unlocked login keyring

  Read the article

• How can I load a file's contents into the clipboard?

  - by Jonathon Watney

  I have a files where I need to copy their contents to another file or into an application and rather than open it up, select all the text then copy and paste I'd like to know if I can effectively cat the file contents into the clipboard. Is this possible? A Windows program would be fine but something that works on Linux would be useful too. I don't use a Mac but it might be useful to others. Bonus points if this can be done on the command line.

  Read the article

• Why is the reported user "root" when a "normal user" executes "ps ux" on OS X? Is this normal behavi

  - by snies

  I am running OS X 10.6.1 . When i am logged in as a normal user of group staff and do a ps ux it lists my ps ux command as being run by root: snies 181 0.0 0.3 2774328 12500 ?? S 6:00PM 0:20.96 /System/Library... root 1673 0.0 0.0 2434788 508 s001 R+ 8:16AM 0:00.00 ps ux snies 177 0.0 0.0 2457208 984 ?? Ss 6:00PM 0:00.52 /sbin/launchd snies 1638 0.0 0.0 2435468 1064 s001 S 8:13AM 0:00.03 -bash Is this normal behaviour? And if so why? Please note that the user is not an Administrator account and is not able to sudo.

  Read the article

• DNS error only in IE

  - by Le_Quack

  Our Intranet page has stopped working on some machines/some user accounts. The error I am getting points to a DNS issue but If I ping the site from the command line the it responds fine. The error I'm gettting on IE is Error: The web filter could not find the address for the requested site Why are you seeing this: The system is unable too determine the IP address of intranet.example.com I'm not quite sure why it mentions the web filter as there is a proxy exception for the intranet page and if I run a trace route it doesn't go via the web proxy (filtering system). Finally it isn't affecting everyone, just random users, also it doesn't affect the random users on all the client machines they use. I have one user where it happens on any client they log onto where most its just certian clients. It's even "fixed" itself for a few peoples. EDIT: hey Mikey thanks for the fast response. Proxies are correct and automatic configuration is off (both via GPO)

  Read the article

• Duplicity Errno 2 - no such file or directory

  - by Luma

  Hello, I am trying to setup a script for backing up a linux box to a CIFS share. I manually mounted the CIFS share and created a few test folders - OK I then ran duplicity manually with a rather simple command to begin with to make sure things work and well Not OK on this one :) duplicity /root file:///cifsmountfolder/existingfolder/ results: No signatures found, switching to full backup. Traceback (most recent call last): File "/usr/bin/duplicity", line 463, in <module> with_tempdir(main) File "/usr/bin/duplicity", line 458, in with_tempdir fn() File "/usr/bin/duplicity", line 449, in main full_backup(col_stats) File "/usr/bin/duplicity", line 155, in full_backup bytes_written = write_multivol("full", tarblock_iter, globals.backend) File "/usr/bin/duplicity", line 99, in write_multivol backend.put(tdp, dest_filename) File "/usr/lib/python2.5/site-packages/duplicity/backends.py", line 279, in put target_path.writefileobj(source_path.open("rb")) File "/usr/lib/python2.5/site-packages/duplicity/path.py", line 500, in writefileobj fout = self.open("wb") File "/usr/lib/python2.5/site-packages/duplicity/path.py", line 448, in open else: result = open(self.name, mode) IOError: [Errno 2] No such file or directory: '/cifsmountfolder/existingfolder/duplicity-full.2010-09-18T18:41:43-07:00.vol1.difftar.gpg' any ideas? Thank you. Luc

  Read the article

• Announcement: Oracle Database Appliance 2.4 patch update now available

  - by uwes

  The Oracle Database Appliance 2.4 patch is now available from My Oracle Support (MOS).  If you search for the Oracle Database Appliance 2.4.0.0.0 Kit under Patches it will display the newly uploaded bundles. The patch highlights include: Normal redundancy (double-mirroring) option providing 6TB of usable storage Enhanced Diagnostics - Trace File Analyzer and ODACHK Also, if you review the README, you may see content that says:        "The grid infrastructure and database patching, both are rolling upgradable. During our patching, we patch the node 1 first and when completed, we patch the node 2." I would like to clarify that the 'infrastructure' updates (OS, Firmware, ILOM, etc) will require a  short downtime of the ODA while it is applied.  When you update the grid infrastructure (--gi), the appliance manager verifies that the infrastructure was updated so you cannot just patch the GI without first updating the infrastructure. The high level update patch steps include (but not limited to): Download patch update to your ODA The --infra (infrastructure) is updated and ODA Databases are down and the ODA is/may be rebooted ODA and GI/Databases are restarted Issue the command to update the Grid Infrastructure/databases (The order of the steps are completed automatically and you cannot control when the nodes are brought up and down during the patching) Node 1 -- shutdown databases and GI Node 1 -- patch GI/database Node 1 -- bring up databases and GI Node 2 -- shutdown databases and GI Node 2 -- patch GI/database Node 2 -- bring up databases and GI A replay from Friday's with Sohan on the 2.4 release can be found here.  The PDF of the presentation is here. The Data Sheet, WP, and 2.4 Configurator are available on the ODA OTN site.

  Read the article

• Desktop login fails, terminal works

  - by Tobias

  I have a freshly setup 12.04 LTS pc system (120 GB SSD, 1 TB HDD, 16 GiB RAM); since a few days, I can't login to the graphical desktop anymore: there is very short flashing shell window which disappears very quickly, and I'm confronted with the login screen again. I believe there is something about modprobe and vbox, but I can't read it fast enough ... I can login to a terminal (Ctrl+Alt+F1). It did not help to chown all contents of my home directory to me:my-group, like suggested here. This is what I could find in /var/log, grepping for the date and time (I inserted linebreaks after <my-hostname>; real time values preserved): auth.log: <date> 22:43:01 <my-hostname> lightdm: pam_succeed_if(lightdm:auth): requirement "user ingroup nopasswdlogin" not met by user "tobias" <date> 22:43:08 <my-hostname> lightdm: pam_unix(lightdm:session): session closed for user lightdm <date> 22:43:08 <my-hostname> lightdm: pam_unix(lightdm:session): session opened for user tobias by (uid=0) <date> 22:43:08 <my-hostname> lightdm: pam_ck_connector(lightdm:session): nox11 mode, ignoring PAM_TTY :0 <date> 22:43:08 <my-hostname> lightdm: pam_unix(lightdm:session): session closed for user tobias <date> 22:43:09 <my-hostname> lightdm: pam_unix(lightdm:session): session opened for user lightdm by (uid=0) <date> 22:43:09 <my-hostname> lightdm: pam_ck_connector(lightdm:session): nox11 mode, ignoring PAM_TTY :0 <date> 22:43:10 <my-hostname> lightdm: pam_succeed_if(lightdm:auth): requirement "user ingroup nopasswdlogin" not met by user "tobias" <date> 22:43:10 <my-hostname> dbus[756]: [system] Rejected send message, 2 matched rules; type="method_call", sender="1:43" (uid=104 pid=1639 comm="/usr/lib/indicator-datetime/indicator-datetime-ser") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.15" (uid=0 pid=1005 comm="/usr/sbin/console-kit-daemon --no-daemon ") kern.log: <date> 22:43:00 <my-hostname> kernel: [ 16.084525] eth0: no IPv6 routers present syslog: <date> 22:43:00 <my-hostname> kernel: [ 16.084525] eth0: no IPv6 routers present <date> 22:43:01 <my-hostname> ntpdate[1492]: adjust time server 91.189.94.4 offset -0.162831 sec <date> 22:43:08 <my-hostname> acpid: client 969[0:0] has disconnected <date> 22:43:08 <my-hostname> acpid: client connected from 1553[0:0] <date> 22:43:08 <my-hostname> acpid: 1 client rule loaded I have Virtualbox and Truecrypt installed, but I can't think of a reason why they might prevent a graphical login. I'm confused: What is this about requirement "user ingroup nopasswdlogin" not met? I do login using a password, and the password works ok when logging in to a terminal! Can I somehow read the error output, e.g. by delaying it, redirecting it to a file, or having the system prompt me for pressing a key? Has possibly any recent update caused my problem? Should I install the pending updates? How, btw, without access to the graphical UI? I have some working knowledge about the Linux shell, but I'm new to Ubuntu. Any help would be appreciated.

  Read the article

• Linux - Debian - Original groups that a user is in

  - by Auxiliary

  This is embarrassing; I used the usermod command to add myself to the disk group. However I forgot to use the append option! so I'm not a member of any of the groups that I was originally, now terminal says that I'm not even a sudoer (How rude!). So the question is: What are the original groups that a normal Administrator type of user is in? BTW, I am using Linux Mint Debian Edition (LMDE). Any help is appreciated.

  Read the article

• Install lubuntu 12.04 on an old Dell c600 : Video issues

  - by maniat1k

  I am trying to install lubuntu on an old laptop. I use the 386 alternate instalation of it, because it has only 256mb ... All when ok so when I start up the lubuntu the screen splits between 1024x768 and 800x600... its very horrible to use =). Ok I do this: lspci and found an ATI Rage mobility M3. 01:00.0 VGA compatible controller: ATI Technologies Inc Rage Mobility M3 AGP 2x (rev 02) So I tryied the old xorg way to edit the missing resolution, but it does not work:... Section "Screen" Identifier "Default Screen" Device "ATI Technologies, Inc. Rage Mobility M3 (AGP)" Monitor "Generic Monitor" DefaultDepth 24 SubSection "Display" Depth 1 Modes "1024x768" EndSubSection SubSection "Display" Depth 4 Modes "1024x768" EndSubSection SubSection "Display" Depth 8 Modes "1024x768" EndSubSection SubSection "Display" Depth 15 Modes "1024x768" EndSubSection SubSection "Display" Depth 16 Modes "1024x768" EndSubSection SubSection "Display" Depth 24 Modes "1024x768" EndSubSection EndSection on an brand new xorg.conf... Do an init 6 to see if X take the changes, but nothing habbened: also tryed to do pkg-reconfigure -changedir /etc/X11 (where I created the new xorg.conf) and nothing.. removed the X conf from /tmp.. also do sudo apt-get update / upgrade... and no luck... UPDATE Updated to 12.04. This an edited xorg fr old dells like mine: # xorg.conf (X.Org X Window System server configuration file) # # This file was generated by dexconf, the Debian X Configuration tool, using # values from the debconf database. # # Edit this file with caution, and see the xorg.conf manual page. # (Type "man xorg.conf" at the shell prompt.) # # This file is automatically updated on xserver-xorg package upgrades *only* # if it has not been modified since the last upgrade of the xserver-xorg # package. # # If you have edited this file but would like it to be automatically updated # again, run the following command: # sudo dpkg-reconfigure -phigh xserver-xorg # xorg.conf for dell latitude c600 by A. Howlett and others Section "ServerLayout" Identifier "Default Server Layout" Screen 0 "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" InputDevice "Generic Mouse" "AlwaysCore" EndSection Section "Files" RgbPath "/usr/X11R6/lib/X11/rgb" FontPath "/usr/share/fonts/local" FontPath "/usr/share/fonts/misc" FontPath "/usr/share/fonts/75dpi:unscaled" FontPath "/usr/share/fonts/100dpi:unscaled" FontPath "/usr/share/fonts/Type1" FontPath "/usr/share/fonts/CID" FontPath "/usr/share/fonts/Speedo" FontPath "/usr/share/fonts/cyrillic" FontPath "/usr/share/fonts/artwiz-aleczapka" FontPath "/usr/share/fonts/TTF" FontPath "/usr/share/fonts/util" FontPath "/usr/local/share/fonts" FontPath "/usr/share/fonts" FontPath "/usr/share/fonts" FontPath "/usr/share/fonts/aquafont" FontPath "/usr/share/fonts/artwiz" FontPath "/usr/share/fonts/artwiz-aleczapka-en" FontPath "/usr/share/fonts/corefonts" FontPath "/usr/share/fonts/freefont" EndSection Section "Module" Load "GLcore" Load "dbe" Load "dri" Load "extmod" Load "glx" Load "pex5" Load "record" Load "xie" Load "v4l" Load "freetype" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "keyboard" Option "XkbModel" "pc104" Option "XkbLayout" "us" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "CorePointer" Option "Device" "/dev/psaux" Option "Protocol" "PS/2" Option "Emulate3Buttons" "true" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" Identifier "Generic Mouse" Driver "mouse" Option "SendCoreEvents" "true" Option "Device" "/dev/input/mice" Option "Protocol" "ImPS/2" Option "Emulate3Buttons" "true" Option "ZAxisMapping" "4 5" EndSection Section "Monitor" Identifier "laptop LCD" VendorName "Dell" ModelName "Latitude C600" HorizSync 31.5-48.5 VertRefresh 40-70 EndSection Section "Device" Identifier "Video0" Driver "r128" VideoRam 8192 Option "EnablePageFlip" "true" Option "AGPFastWrite" "true" Option "AGPMode" "2" BusID "PCI:01:00:0" Screen 0 Option "Display" "FP" Option "MonitorLayout" "CRT, LFP" EndSection Section "Screen" Identifier "Screen0" Device "Video0" Monitor "laptop LCD" DefaultDepth 16 Subsection "Display" Depth 32 Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480" EndSubSection Subsection "Display" Depth 24 Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480" EndSubSection Subsection "Display" Depth 16 Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480" EndSubSection Subsection "Display" Depth 8 Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480" EndSubSection EndSection Section "DRI" Mode 0666 EndSection

  Read the article

• Error mounting: mount exited with exit code 13

  - by Mike Williamson

  I keep a windows partition on my laptop for the occaisional bit of Photoshop work. A while ago I noticed that Windows had disappeared from my grub boot menu and when I try to mount the windows partion, my system hangs for a bit and then I get this: Unable to mount 105 GB Filesystem Error mounting: mount exited with exit code 13: ntfs_attr_pread_i: ntfs_pread failed: Input/output error Failed to calculate free MFT records: Input/output error NTFS is either inconsistent, or there is a hardware fault, or it's a SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows then reboot into Windows twice. The usage of the /f parameter is very important! If the device is a SoftRAID/FakeRAID then first activate it and mount a different device under the /dev/mapper/ directory, (e.g. /dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation for more details. It seems that chkdsk is a windows command but since I can't boot into windows (since its the windows partition that is the problem) I'm not sure what to do. Here is the output of fdisk to give you the lay of the land: Disk /dev/sda: 250.1 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x98000000 Device Boot Start End Blocks Id System /dev/sda1 1 10199 81923436 83 Linux /dev/sda2 * 10200 22947 102398310 7 HPFS/NTFS /dev/sda3 22948 29164 49938052+ 83 Linux /dev/sda4 29165 30401 9936202+ 5 Extended /dev/sda5 29165 30401 9936171 82 Linux swap / Solaris Any guidance would be appreciated!

  Read the article

• Windows Handling Piped Comands Error Redirection

  - by jpmartins

  Warning: I am no expert on building scripts, and sorry for lousy English. In an case of generating a CSV from a database query I'm using the following commands. ... CALL java.exe -classpath ... com.xigole.util.sql.Jisql -user dmfodbc -pf pwd.file -driver com.sybase.jdbc3.jdbc.SybDriver -cstring %constr% -c ; -input 42.sql -formatter csv -delimiter ; 2%LOGFILE% | CALL grep -v -e "SELECT right" -e "executing: " -e " rows affect" %FicheiroR% 2%LOGFILE% ... I'm using windows implementation of grep. The 2%LOGFILE% in both java and grep command is causing an error message indicating the file is being use by another process. The Ugly workaround i have came up with is to put grep error redirect to a temporary %LOGFILE%.aux java ... | grep ... 2%LOGFILE%.aux type %LOGFILE%.aux % %LOGFILE% del %LOGFILE%.aux What is a better solution?

  Read the article

• What design patterns are the worst or most narrowly defined?

  - by Akku

  For every programming project, Managers with past programming experience try to shine when they recommend some design patterns for your project. I like design patterns when they make sense or if you need a scalbale solution. I've used Proxies, Observers and Command patterns in a positive way for example, and do so every day. But I'm really hesitant to use say a Factory pattern if there's only one way to create an object, as a factory might make it all easier in the future, but complicates the code and is pure overhead. So, my question is in respect to my future career and my answer to manager types throwing random pattern-names around: Which design patterns did you use, that threw you back overall? Which are the worst design patterns, that you shouldn't have a look at if it's not that only single situation where it makes sense (read: which design patterns are very narrowly defined)? (It's like I was looking for the negative reviews of an overall good product of amazon to see what bugged people most in using design patterns). And I'm not talking about Anti-Patterns here, but about Patterns that are usually thought of as "good" patterns. Edit: As some answered, the problem is most often that patterns are not "bad" but "used wrong". If you know patterns, that are often misused or even difficult to use, they would also fit as an answer.

  Read the article

• How do I align my partition table properly?

  - by Jorge Castro

  I am in the process of building my first RAID5 array. I've used mdadm to create the following set up: root@bondigas:~# mdadm --detail /dev/md1 /dev/md1: Version : 00.90 Creation Time : Wed Oct 20 20:00:41 2010 Raid Level : raid5 Array Size : 5860543488 (5589.05 GiB 6001.20 GB) Used Dev Size : 1953514496 (1863.02 GiB 2000.40 GB) Raid Devices : 4 Total Devices : 4 Preferred Minor : 1 Persistence : Superblock is persistent Update Time : Wed Oct 20 20:13:48 2010 State : clean, degraded, recovering Active Devices : 3 Working Devices : 4 Failed Devices : 0 Spare Devices : 1 Layout : left-symmetric Chunk Size : 64K Rebuild Status : 1% complete UUID : f6dc829e:aa29b476:edd1ef19:85032322 (local to host bondigas) Events : 0.12 Number Major Minor RaidDevice State 0 8 16 0 active sync /dev/sdb 1 8 32 1 active sync /dev/sdc 2 8 48 2 active sync /dev/sdd 4 8 64 3 spare rebuilding /dev/sde While that's going I decided to format the beast with the following command: root@bondigas:~# mkfs.ext4 /dev/md1p1 mke2fs 1.41.11 (14-Mar-2010) /dev/md1p1 alignment is offset by 63488 bytes. This may result in very poor performance, (re)-partitioning suggested. Filesystem label= OS type: Linux Block size=4096 (log=2) Fragment size=4096 (log=2) Stride=16 blocks, Stripe width=48 blocks 97853440 inodes, 391394047 blocks 19569702 blocks (5.00%) reserved for the super user First data block=0 Maximum filesystem blocks=0 11945 block groups 32768 blocks per group, 32768 fragments per group 8192 inodes per group Superblock backups stored on blocks: 32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208, 4096000, 7962624, 11239424, 20480000, 23887872, 71663616, 78675968, 102400000, 214990848 Writing inode tables: ^C 27/11945 root@bondigas:~# ^C I am unsure what to do about "/dev/md1p1 alignment is offset by 63488 bytes." and how to properly partition the disks to match so I can format it properly.

  Read the article

• Editing sudoers file to restrict a user's commands

  - by devin

  Is it possible to edit the sudoers file so a user can use sudo for any command except for a specified one? I reverse is true, I believe, that the sudoers file can be setup so that a user can only execute a given list of commands. EDIT: the commands I really want to take away are halt and reboot... this makes me think there are special system calls for halt and reboot. Can you take system calls away from a user? If not, is it because the unix permission system abstracts over system calls neglecting this?

  Read the article

• LEMP Stack on Ubuntu Server 13.04 not parsing PHP Switch Statement Properly

  - by schester

  On my Ubuntu 12.04 Server LTS on nginx 1.1.19, the following PHP code works properly: switch($_SESSION['user']['permissions']) { case 9: echo "Super Admin Privileges"; break; case 0: echo "Operator Privileges"; break; case 1: echo "Line Leader Privileges"; break; case 2: echo "Supervisor Privileges"; break; case 3: echo "Engineer Privileges"; break; case 4: echo "Manager Privileges"; break; case 5: echo "Administrator Privileges"; break; default: echo "Operator Privileges"; } However, I have a backup server running Ubuntu Server 13.04 on nginx 1.4.1 which has the exact same copy of the script (synced) but instead of breaking on the break; command, it echos the whole php script. The output on the 12.04 Box is similar to this: You are logged in with Super Admin Privileges But on the 13.04 Box, the output is like this: You are logged in logged in with Super Admin Privileges"; break; case 0: echo "Operator Privileges"; break; case 1: echo "Line Leader Privileges"; break; case 2: echo "Supervisor Privileges"; break; case 3: echo "Engineer Privileges"; break; case 4: echo "Manager Privileges"; break; case 5: echo "Administrator Privileges"; break; default: echo "Operator Privileges"; } ?> I have also tried changing the script from switch statement to if statements but same results. Any idea what is wrong?

  Read the article

• Advanced file compression software for Mac OSX

  - by Steven Roose

  Back when I used Windows, I always used WinRAR for file compression and decompression. It had a fair amount of options like 'just storage' vs 'hard compression', password protection and archive type. Now that I use Mac OSX, the only compression possibility I have is the default Finder's Compress to Zip. I downloaded the most popular decompression software "Unarchiver". But this app can't compress other archive types either. I went for a search but there seem to be hardly any good advanced compression tools that work nice in OSX and have the options WinRAR has. (WinRAR works in OSX but command line only, I'm looking for something with a GUI.) Any ideas? I strongly prefer freeware. I found Archiver and StiffIt, but they are both commercial.

  Read the article

• Software to store my password on a crypted file and access it through another password

  - by Fire-Dragon-DoL

  I'm looking for a software that allows me to store some passwords in something like "a text file", access it through a password, read my passwords if required and close it again. I want something really straightforward, double click on file, right click "Add new password", add password, description and close. The file must be really secure, I'll store all my passwords there. I know about some command line solutions but I want my setup to be really fast on reading. Do someone know if such a software exist and can point me in the correct direction? I would like to find it freeware, but I'm ok with some low cost tools too.

  Read the article

• MySQL doesn't talk to PHP anymore (EasyPHP)

  - by Matt Ellen

  I've just upgraded from Windows XP to Windows 7 (64 bit) I was using EasyPHP 5.3.1 to develop my website, but since I've upgraded I can't get PHP to talk to MySQL. Even the PHPMyAdmin page doesn't load. I've tried installing the latest 64bit version of MySQL in place of the supplied version of MySQL, but that hasn't helped. The queries just don't seem to reach MySQL. I have verified that the DB for my database works by running mysql on the command line. PHPMyAdmin doesn't display an error, just a blank page. The error coming up from my website is: Warning: PDO::__construct() [pdo.--construct]: [2002] A connection attempt failed because the connected party did not (trying to connect via tcp://localhost:3306) in E:\services\EasyPHP-5.3.1\www\IdeaWeb\classes\Security.inc on line 14 Fatal error: Maximum execution time of 60 seconds exceeded in E:\services\EasyPHP-5.3.1\www\IdeaWeb\classes\Security.inc on line 0 Does anyone know how to solve this? (i.e. get MySQL talking to PHP.)

  Read the article

• Updating PHP in CenOS

  - by Reza

  I followed this tutorial to update PHP from 5.3 version to 5.4. My distro is CentOS 5.5. after running following command: yum --enablerepo=remi,remi-test install httpd php php-common I get following error: --> Missing Dependency: php-common = 5.3.13-1.w5 is needed by package php-zts-5.3.13-1.w5.i386 (installed) Error: Missing Dependency: php-common = 5.3.13-1.w5 is needed by package php-zts-5.3.13-1.w5.i386 (installed) Error: php53-common conflicts with php-common You could try using --skip-broken to work around the problem You could try running: package-cleanup --problems package-cleanup --dupes rpm -Va --nofiles --nodigest The program package-cleanup is found in the yum-utils package. How can I solve this error?

  Read the article

< Previous Page | 586 587 588 589 590 591 592 593 594 595 596 597  | Next Page >