Search Results

Search found 23555 results on 943 pages for 'command timeout'.

Page 592/943 | < Previous Page | 588 589 590 591 592 593 594 595 596 597 598 599  | Next Page >

  • Mount Return Code for CIFS mount

    - by laikadad101
    When I run the following command (as root or via sudo) from a bash script I get an exit status (or return code in mount man page parlance) of 1: mount -v -t cifs //nasbox/volume /tmpdir/ --verbose -o credentials=/root/cifsid & /tmp/mylog It outputs the following into the myflog file: parsing options: rw,credentials=/root/cifsid mount.cifs kernel mount options unc=//nasbox\volume,ip=192.168.1.1,user=root,pass=xxxx,ver=1,rw,credentials=/root/cifsid It mounts the volume fine but returns the exit code (from the mount man page): 1 Incorrect invocation or permissions The standard Linux log files don't contain any error information. Hence, all seems to go well but I get an exit code of 1 instead of 0. Any ideas? The -v and --verbose options are just there for debugging this problem.

    Read the article

  • IOCTL call error when trying to format an SD card

    - by masfenix
    Found an SD card (1GB) lying around. Thought I might pop that into my card reader and see if anything is on it. Nothing. There isn't even a file system on it. I right-click and go "format" but nothing happens. So I try in command. > format f: Insert new disk for drive F: and press ENTER when ready... Error in IOCTL call. What does this mean?

    Read the article

  • Using pfSense, OpenVPN Connects but Still Can't See the Network

    - by nicorellius
    I am having an OpenVPN issue. I have a pfSense box at home configured to allow traffic through a VPN tunnel. The client computer is Windows XP Home, behind a standard Comcast connection and a Netgear wireless router. I use OpenVPN to access my work network (from where I am trying to get out of in this post) from home (with an XP Pro machine behind pfSense), and this works fine. The client config is similar but has the changes specific to my setup... Here is my XP Home config: client dev tun proto tcp remote pfsense.*.org 1194 (starred out by me) resolv-retry infinite nobind persist-key persist-tun ca ca.crt cert client.crt key client.key ns-cert-type server comp-lzo verb 3 When I launch the OpenVPN GUI, the Tunnel TAP network connection turns red, and I can right-click that to connect to the server. Everything seems to work fine until I browse for the actual network. The Tunnel TAP connection turns green and it says connected to 10.1.1.6 (I have tried different IP pools here too with no luck). I can see the internal network fine, but my home network behind pfSense is not there. I have tried browsing there by using Tools Map Network Drive, using the browser, with no success. When I open the command line on the client and use the ipconfig -all command, I get the following: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : TAP-Win32 Adapter V9 Physical Address. . . . . . . . . : *** (starred out by me) Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : 10.1.1.6 Subnet Mask . . . . . . . . . . . : 255.255.255.252 Default Gateway . . . . . . . . . : DHCP Server . . . . . . . . . . . : 10.1.1.5 Lease Obtained. . . . . . . . . . : Monday, March 15, 2010 1:18:37 PM Lease Expires . . . . . . . . . . : Tuesday, March 15, 2011 1:18:37 PM I noticed that the default gateway is not present. Could this be my problem? I am still relatively new to firewalls, VPN, and network configuration so I'm sure I am messing up something simple. Oh yah, I should note that I have firewall rules configured for pfSense to allow traffic through the WAN and the LAN. At first there was just the WAN firewall rule, because that is what I got from the literature I was reading. I then created a LAN rule as well, but I'm not sure if this was correct. Neither way works, though. Screen shots below: Any help is much appreciated.

    Read the article

  • Azure Grid Computing - Worker Roles as HPC Compute Nodes

    - by JoshReuben
    Overview ·        With HPC 2008 R2 SP1 You can add Azure worker roles as compute nodes in a local Windows HPC Server cluster. ·        The subscription for Windows Azure like any other Azure Service - charged for the time that the role instances are available, as well as for the compute and storage services that are used on the nodes. ·        Win-Win ? - Azure charges the computer hour cost (according to vm size) amortized over a month – so you save on purchasing compute node hardware. Microsoft wins because you need to purchase HPC to have a local head node for managing this compute cluster grid distributed in the cloud. ·        Blob storage is used to hold input & output files of each job. I can see how Parametric Sweep HPC jobs can be supported (where the same job is run multiple times on each node against different input units), but not MPI.NET (where different HPC Job instances function as coordinated agents and conduct master-slave inter-process communication), unless Azure is somehow tunneling MPI communication through inter-WorkerRole Azure Queues. ·        this is not the end of the story for Azure Grid Computing. If MS requires you to purchase a local HPC license (and administrate it), what's to stop a 3rd party from doing this and encapsulating exposing HPC WCF Broker Service to you for managing compute nodes? If MS doesn’t  provide head node as a service, someone else will! Process ·        requires creation of a worker node template that specifies a connection to an existing subscription for Windows Azure + an availability policy for the worker nodes. ·        After worker nodes are added to the cluster, you can start them, which provisions the Windows Azure role instances, and then bring them online to run HPC cluster jobs. ·        A Windows Azure worker role instance runs a HPC compatible Azure guest operating system which runs on the VMs that host your service. The guest operating system is updated monthly. You can choose to upgrade the guest OS for your service automatically each time an update is released - All role instances defined by your service will run on the guest operating system version that you specify. see Windows Azure Guest OS Releases and SDK Compatibility Matrix (http://go.microsoft.com/fwlink/?LinkId=190549). ·        use the hpcpack command to upload file packages and install files to run on the worker nodes. see hpcpack (http://go.microsoft.com/fwlink/?LinkID=205514). Requirements ·        assuming you have an azure subscription account and the HPC head node installed and configured. ·        Install HPC Pack 2008 R2 SP 1 -  see Microsoft HPC Pack 2008 R2 Service Pack 1 Release Notes (http://go.microsoft.com/fwlink/?LinkID=202812). ·        Configure the head node to connect to the Internet - connectivity is provided by the connection of the head node to the enterprise network. You may need to configure a proxy client on the head node. Any cluster network topology (1-5) is supported). ·        Configure the firewall - allow outbound TCP traffic on the following ports: 80,       443, 5901, 5902, 7998, 7999 ·        Note: HPC Server  uses Admin Mode (Elevated Privileges) in Windows Azure to give the service administrator of the subscription the necessary privileges to initialize HPC cluster services on the worker nodes. ·        Obtain a Windows Azure subscription certificate - the Windows Azure subscription must be configured with a public subscription (API) certificate -a valid X.509 certificate with a key size of at least 2048 bits. Generate a self-sign certificate & upload a .cer file to the Windows Azure Portal Account page > Manage my API Certificates link. see Using the Windows Azure Service Management API (http://go.microsoft.com/fwlink/?LinkId=205526). ·        import the certificate with an associated private key on the HPC cluster head node - into the trusted root store of the local computer account. Obtain Windows Azure Connection Information for HPC Server ·        required for each worker node template ·        copy from azure portal - Get from: navigation pane > Hosted Services > Storage Accounts & CDN ·        Subscription ID - a 32-char hex string in the form xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx. In Properties pane. ·        Subscription certificate thumbprint - a 40-char hex string (you need to remove spaces). In Management Certificates > Properties pane. ·        Service name - the value of <ServiceName> configured in the public URL of the service (http://<ServiceName>.cloudapp.net). In Hosted Services > Properties pane. ·        Blob Storage account name - the value of <StorageAccountName> configured in the public URL of the account (http://<StorageAccountName>.blob.core.windows.net). In Storage Accounts > Properties pane. Import the Azure Subscription Certificate on the HPC Head Node ·        enable the services for Windows HPC Server  to authenticate properly with the Windows Azure subscription. ·        use the Certificates MMC snap-in to import the certificate to the Trusted Root Certification Authorities store of the local computer account. The certificate must be in PFX format (.pfx or .p12 file) with a private key that is protected by a password. ·        see Certificates (http://go.microsoft.com/fwlink/?LinkId=163918). ·        To open the certificates snapin: Run > mmc. File > Add/Remove Snap-in > certificates > Computer account > Local Computer ·        To import the certificate via wizard - Certificates > Trusted Root Certification Authorities > Certificates > All Tasks > Import ·        After the certificate is imported, it appears in the details pane in the Certificates snap-in. You can open the certificate to check its status. Configure a Proxy Client on the HPC Head Node ·        the following Windows HPC Server services must be able to communicate over the Internet (through the firewall) with the services for Windows Azure: HPCManagement, HPCScheduler, HPCBrokerWorker. ·        Create a Windows Azure Worker Node Template ·        Edit HPC node templates in HPC Node Template Editor. ·        Specify: 1) Windows Azure subscription connection info (unique service name) for adding a set of worker nodes to the cluster + 2)worker node availability policy – rules for deploying / removing worker role instances in Windows Azure o   HPC Cluster Manager > Configuration > Navigation Pane > Node Templates > Actions pane > New à Create Node Template Wizard or Edit à Node Template Editor o   Choose Node Template Type page - Windows Azure worker node template o   Specify Template Name page – template name & description o   Provide Connection Information page – Azure Subscription ID (text) & Subscription certificate (browse) o   Provide Service Information page - Azure service name + blob storage account name (optionally click Retrieve Connection Information to get list of available from azure – possible LRT). o   Configure Azure Availability Policy page - how Windows Azure worker nodes start / stop (online / offline the worker role instance -  add / remove) – manual / automatic o   for automatic - In the Configure Windows Azure Worker Availability Policy dialog -select days and hours for worker nodes to start / stop. ·        To validate the Windows Azure connection information, on the template's Connection Information tab > Validate connection information. ·        You can upload a file package to the storage account that is specified in the template - eg upload application or service files that will run on the worker nodes. see hpcpack (http://go.microsoft.com/fwlink/?LinkID=205514). Add Azure Worker Nodes to the HPC Cluster ·        Use the Add Node Wizard – specify: 1) the worker node template, 2) The number of worker nodes   (within the quota of role instances in the azure subscription), and 3)           The VM size of the worker nodes : ExtraSmall, Small, Medium, Large, or ExtraLarge.  ·        to add worker nodes of different sizes, must run the Add Node Wizard separately for each size. ·        All worker nodes that are added to the cluster by using a specific worker node template define a set of worker nodes that will be deployed and managed together in Windows Azure when you start the nodes. This includes worker nodes that you add later by using the worker node template and, if you choose, worker nodes of different sizes. You cannot start, stop, or delete individual worker nodes. ·        To add Windows Azure worker nodes o   In HPC Cluster Manager: Node Management > Actions pane > Add Node à Add Node Wizard o   Select Deployment Method page - Add Azure Worker nodes o   Specify New Nodes page - select a worker node template, specify the number and size of the worker nodes ·        After you add worker nodes to the cluster, they are in the Not-Deployed state, and they have a health state of Unapproved. Before you can use the worker nodes to run jobs, you must start them and then bring them online. ·        Worker nodes are numbered consecutively in a naming series that begins with the root name AzureCN – this is non-configurable. Deploying Windows Azure Worker Nodes ·        To deploy the role instances in Windows Azure - start the worker nodes added to the HPC cluster and bring the nodes online so that they are available to run cluster jobs. This can be configured in the HPC Azure Worker Node Template – Azure Availability Policy -  to be automatic or manual. ·        The Start, Stop, and Delete actions take place on the set of worker nodes that are configured by a specific worker node template. You cannot perform one of these actions on a single worker node in a set. You also cannot perform a single action on two sets of worker nodes (specified by two different worker node templates). ·        ·          Starting a set of worker nodes deploys a set of worker role instances in Windows Azure, which can take some time to complete, depending on the number of worker nodes and the performance of Windows Azure. ·        To start worker nodes manually and bring them online o   In HPC Node Management > Navigation Pane > Nodes > List / Heat Map view - select one or more worker nodes. o   Actions pane > Start – in the Start Azure Worker Nodes dialog, select a node template. o   the state of the worker nodes changes from Not Deployed to track the provisioning progress – worker node Details Pane > Provisioning Log tab. o   If there were errors during the provisioning of one or more worker nodes, the state of those nodes is set to Unknown and the node health is set to Unapproved. To determine the reason for the failure, review the provisioning logs for the nodes. o   After a worker node starts successfully, the node state changes to Offline. To bring the nodes online, select the nodes that are in the Offline state > Bring Online. ·        Troubleshooting o   check node template. o   use telnet to test connectivity: telnet <ServiceName>.cloudapp.net 7999 o   check node status - Deployment status information appears in the service account information in the Windows Azure Portal - HPC queries this -  see  node status information for any failed nodes in HPC Node Management. ·        When role instances are deployed, file packages that were previously uploaded to the storage account using the hpcpack command are automatically installed. You can also upload file packages to storage after the worker nodes are started, and then manually install them on the worker nodes. see hpcpack (http://go.microsoft.com/fwlink/?LinkID=205514). ·        to remove a set of role instances in Windows Azure - stop the nodes by using HPC Cluster Manager (apply the Stop action). This deletes the role instances from the service and changes the state of the worker nodes in the HPC cluster to Not Deployed. ·        Each time that you start a set of worker nodes, two proxy role instances (size Small) are configured in Windows Azure to facilitate communication between HPC Cluster Manager and the worker nodes. The proxy role instances are not listed in HPC Cluster Manager after the worker nodes are added. However, the instances appear in the Windows Azure Portal. The proxy role instances incur charges in Windows Azure along with the worker node instances, and they count toward the quota of role instances in the subscription.

    Read the article

  • Move exchange mailboxes cross forest

    - by Aceth
    Having a hard time migrating user mailboxes across 2 forests. I've set up ADMT 3.2, No dns issues and fully route-able between the domains etc. Have come to migrate user mailboxes and the exchange shell just comes back with ... [PS] C:New-MoveRequest -Identity "username" -TargetDatabase "maildb" -RemoteGlobalCatalog 'gdc.doman.local' -RemoteCredential (get-credential) -TargetDeliveryDomain 'sourcedomain.local' Parameter set cannot be resolved using the specified named parameters. + CategoryInfo : InvalidArgument: (:) [New-MoveRequest], ParameterBindingException + FullyQualifiedErrorId : AmbiguousParameterSet,New-MoveRequest We are running a mixed environment (windows server 2003 and up with exchange 2003 and exchange 2010 (different servers obviously)) as a source domain and full Server 2008 R2 servers in the target domain with only 1 exchange 2010 server. We have ran this command on the Exchange 2010 server on the target domain and when asked giving the credentials of an admin in source domain in the format : sourcedomain\source_administrator Any help would be greatly appreciated Thanks Rhys

    Read the article

  • How to Bridge Two Ethernet Ports on Mac OS X

    - by Rabarberski
    How can I bridge two wired ethernet interfaces on Mac OS X (e.g. the current MacPro comes with two ethernet ports)? Googling turned up (e.g. this Apple forum post and this openvpn post) that this is fairly easy on Linux (using the brctl command) and under Windows (via Network Connections right-click Bridge Connections), but how is it done under Mac OS X? BTW: There also doesn't seem to be a macport for brctl ('port search brctl' didn't turn up any results) Note: I don't want to have 'internet sharing', which creates a new network (by handing out network addresses in a new range). I want to really 'bridge' two interfaces so to keep the same network subnet.

    Read the article

  • How to disable SSLCompression on Apache httpd 2.2.15?

    - by Stefan Lasiewski
    I read about the CRIME attack against TLS Compression (CRIME is a successor to the BEAST attack against ssl & tls), and I want to protect my webservers against this attack by disabling SSL Compression, which was added to Apache 2.2.22 (See Bug 53219). I am running Scientific Linux 6.1, which ships with httpd-2.2.15. Security fixes for upstream versions of httpd 2.2 should be backported to this version. # rpm -q httpd httpd-2.2.15-15.sl6.1.x86_64 # httpd -V Server version: Apache/2.2.15 (Unix) Server built: Feb 14 2012 09:47:14 Server's Module Magic Number: 20051115:24 Server loaded: APR 1.3.9, APR-Util 1.3.9 Compiled using: APR 1.3.9, APR-Util 1.3.9 I tried SSLCompression off in my configuration, but that results in the following error message: # /etc/init.d/httpd restart Stopping httpd: [ OK ] Starting httpd: Syntax error on line 147 of /etc/httpd/httpd.conf: Invalid command 'SSLCompression', perhaps misspelled or defined by a module not included in the server configuration [FAILED] Is it possible to disable SSLCompression with this version of Apache Webserver?

    Read the article

  • How do I mount an EBS root volume to a windows instance in Amazon EC2

    - by Kyle
    So basically, I created a large windows server for development, and then I created a micro windows server for production. I set up everything how I wanted it on my development server, and then i unmounted the drives, and mounted them to my micro server. Now I'm trying to get back into my large windows development server, and I'm getting the error. Invalid value 'i-4896ce28' for instanceId. Instance does not have a volume attached at root (/dev/sda1) this error pops up when I try to start my large windows server. I've remounted the drives to the large development server, and I still get this message. I'm not really sure what to do, I've read other posts and everyone is giving these almost like command line arguments and talking about other tools, and I really have no clue what any of that means, or where I even have an option to enter any commands without be logged into a specific instance.

    Read the article

  • Upstart scripts

    - by The Journeyman geek
    I'm planning on setting up a server using ubuntu lucid lynx, which uses upstart.I'm not finding the docs too intuitive, so i'd like to ask a solution for my specific problem. I'm currently using a script to start up my IPV6 tunnel with free6/gogo6 - right now its a simple script invoking a single command, and its configuration file #! /bin/sh /usr/local/gw6c/bin/gw6c -f /usr/local/gw6c/bin/gw6c.conf Of course, when this goes down, it tends to be silent, and so i'd need to get in and restart it I'd like to set up an upstart script which will start this app on startup, functionally identical to the script i have restart this script as 'root' should the app fail enable me to restart the tunnel should anything go wrong.

    Read the article

  • Uploading documents to WSS (Windows Sharepoint Services) using SSIS

    - by Randy Aldrich Paulo
    Recently I was tasked to create an SSIS application that will query a database, split the results with certain criteria and create CSV file for every result and upload the file to a Sharepoint Document Library site. I've search the web and compiled the steps I've taken to build the solution. Summary: A) Create a proxy class of WSS Copy.asmx. B) Create a wrapper class for the proxy class and add a mechanism to check if the file is existing and delete method. C) Create an SSIS and call the wrapper class to transfer the files.   A) Creating Proxy Class 1) Go to Visual Studio Command Prompt type wsdl http://[sharepoint site]/_vti_bin/Copy.asmx this will generate the proxy class (Copy.cs) that will be added to the solution. 2) Add Copy.cs to solution and create another constructor for Copy() that will accept additional parameters url, userName, password and domain.   public Copy(string url, string userName, string password, string domain) { this.Url = url; this.Credentials = new System.Net.NetworkCredential(userName, password, domain); } 3) Add a namespace.     B) Wrapper Class Create a C# new library that references the Proxy Class.         C) Create SSIS SSIS solution is composed of:   1) Execute SQL Task, returns a single column rows containing the criteria. 2) Foreach Loop Container - loops per result from query (SQL Task) and creates a CSV file on a certain folder. 3) Script Task - calls the wrapper class to upload CSV files located on a certain folder to targer WSS Document Library Note: I've created another overload of CopyFiles that accepts a Directory Info instead of file location that loops thru the contents of the folder. Designer View Variable View

    Read the article

  • Likewise DomainJoin hangs on Finishing krb5.conf configuration

    - by dreay
    Hello, I have a problem when joining a CentOS release 5.4 (Final) x64 machine to the domain after running domainjoin-cli --loglevel info --log . join domain.local password I obtain the following, which seems to hang on "20100428112821:INFO:Finishing krb5.conf configuration" 20100428112817:INFO:Domainjoin invoked with the join command (remaining arguments will be printed later): 20100428112817:INFO: [/opt/likewise/bin/domainjoin-cli] 20100428112817:INFO: [--loglevel] 20100428112817:INFO: [info] 20100428112817:INFO: [--log] 20100428112817:INFO: [/tmp/join_1.log] 20100428112817:INFO: [join] 20100428112817:INFO:Checking status of daemon [/etc/init.d/lwsmd] 20100428112817:INFO:Daemon [/etc/init.d/lwsmd]: status [0] 20100428112817:INFO:Checking status of daemon [/etc/init.d/lwsmd] 20100428112817:INFO:Daemon [/etc/init.d/lwsmd]: status [0] 20100428112817:INFO:Checking status of daemon [/etc/init.d/lwregd] 20100428112817:INFO:Daemon [/etc/init.d/lwregd]: status [0] 20100428112817:INFO:Checking status of daemon [/etc/init.d/lwregd] 20100428112817:INFO:Daemon [/etc/init.d/lwregd]: status [0] 20100428112817:INFO:Checking status of daemon [/etc/init.d/netlogond] 20100428112817:INFO:Daemon [/etc/init.d/netlogond]: status [0] 20100428112817:INFO:Checking status of daemon [/etc/init.d/netlogond] 20100428112817:INFO:Daemon [/etc/init.d/netlogond]: status [0] 20100428112817:INFO:Checking status of daemon [/etc/init.d/lwiod] 20100428112817:INFO:Daemon [/etc/init.d/lwiod]: status [0] 20100428112817:INFO:Checking status of daemon [/etc/init.d/lwiod] 20100428112817:INFO:Daemon [/etc/init.d/lwiod]: status [0] 20100428112817:INFO:Checking status of daemon [/etc/init.d/dcerpcd] 20100428112817:INFO:Daemon [/etc/init.d/dcerpcd]: status [0] 20100428112817:INFO:Checking status of daemon [/etc/init.d/dcerpcd] 20100428112817:INFO:Daemon [/etc/init.d/dcerpcd]: status [0] 20100428112817:INFO:Checking status of daemon [/etc/init.d/eventlogd] 20100428112817:INFO:Daemon [/etc/init.d/eventlogd]: status [0] 20100428112817:INFO:Checking status of daemon [/etc/init.d/eventlogd] 20100428112817:INFO:Daemon [/etc/init.d/eventlogd]: status [0] 20100428112817:INFO:Checking status of daemon [/etc/init.d/lsassd] 20100428112817:INFO:Daemon [/etc/init.d/lsassd]: status [0] 20100428112817:INFO:Checking status of daemon [/etc/init.d/lsassd] 20100428112817:INFO:Daemon [/etc/init.d/lsassd]: status [0] 20100428112817:INFO:Domainjoin invoked with 2 arg(s) to the join command: 20100428112817:INFO: [domain.local] 20100428112817:INFO: [default.user] 20100428112817:INFO:Adding ops (fqdn ops.domain.local) to /etc/hosts ip 192.168.246.5, removing ops, ops.domain.local, ops, ops.domain.local 20100428112817:INFO:Reading krb5 file /tmp/likewisetmpPkpAn5/etc/krb5.conf 20100428112817:INFO:Reading krb5 file /tmp/likewisetmpb6dkNX/etc/krb5.conf 20100428112817:INFO:Reading nsswitch file /etc/nsswitch.conf 20100428112817:INFO:Reading pam configuration 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/config-util.rpmnew 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/config-util 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/runuser-l 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/sshd 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/other 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/smtp.postfix 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/su-l 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/system-switch-mail-nox 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/kshell 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/authconfig 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/ekshell 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/run_init 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/screen 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/eject 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/system-auth.rpmnew 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/system-config-network-cmd 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/system-auth-ac 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/kbdrate 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/smtp.sendmail 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/chsh 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/setup 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/system-switch-mail 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/ksu 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/login 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/sudo-i 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/smtp 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/runuser 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/chfn 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/ppp 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/gssftp 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/remote 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/reboot 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/newrole 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/pm-powersave 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/system-auth 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/halt 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/other.rpmnew 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/atd 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/passwd 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/authconfig-tui 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/pm-hibernate 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/su 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/system-config-network 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/neat 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/pm-suspend-hybrid 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/crond 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/sudo 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/pm-suspend 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/poweroff 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.conf 20100428112817:INFO:File /tmp/likewisetmptrO2dQ/etc/pam.conf does not exist 20100428112817:INFO:Found config file /etc/ssh/sshd_config 20100428112817:INFO:Found binary /usr/sbin/sshd 20100428112817:INFO:Reading ssh file /etc/ssh/sshd_config 20100428112817:INFO:Found open sshd version 4.3.-1p2 20100428112817:INFO:Testing option ChallengeResponseAuthentication 20100428112817:INFO:Option ChallengeResponseAuthentication supported 20100428112817:INFO:Testing option UsePAM 20100428112817:INFO:Option UsePAM supported 20100428112817:INFO:Testing option PAMAuthenticationViaKBDInt 20100428112817:INFO:Option PAMAuthenticationViaKBDInt not supported 20100428112817:INFO:Testing option KbdInteractiveAuthentication 20100428112817:INFO:Option KbdInteractiveAuthentication supported 20100428112817:INFO:Testing option GSSAPIAuthentication 20100428112817:INFO:Option GSSAPIAuthentication supported 20100428112817:INFO:Testing option GSSAPICleanupCredentials 20100428112817:INFO:Option GSSAPICleanupCredentials supported 20100428112817:INFO:Found config file /etc/ssh/ssh_config 20100428112817:INFO:Found binary /usr/bin/ssh 20100428112817:INFO:Reading ssh file /etc/ssh/ssh_config 20100428112817:INFO:Testing option GSSAPIAuthentication 20100428112817:INFO:Option GSSAPIAuthentication supported 20100428112817:INFO:Testing option GSSAPIDelegateCredentials 20100428112817:INFO:Option GSSAPIDelegateCredentials supported 20100428112821:INFO:Running module join 20100428112821:INFO:Starting krb5.conf configuration (enabling) 20100428112821:INFO:Reading krb5 file /tmp/likewisetmpvgqQmT/etc/krb5.conf 20100428112821:WARNING:Short domain name not specified. Defaulting to 'betgenius' 20100428112821:INFO:Failed to run lwinet ads trusts. This is expected if not yet joined to the domain 20100428112821:INFO:Failed to run lwiinfo --details -m. This is expected if the auth daemon is not running 20100428112821:INFO:Writing krb5 file /tmp/likewisetmpvgqQmT/etc/krb5.conf 20100428112821:INFO:File /tmp/likewisetmpvgqQmT/etc/krb5.conf modified 20100428112821:INFO:Finishing krb5.conf configuration Has anyone seen this error before? and know of the fix?

    Read the article

  • Want to learn/dive into Java Web Development—where to start?

    - by ernesto che
    Hi folks, I want to dive into Java Web Development, but I don’t know where to start because I am overwhelmed with Frameworks, JSRs, modules and the like. Coming from a PHP and Ruby (on Rails) background, it may seem awkward to go the other way ’round—still there are a lot of places where Java is (and probably will be) prevalent. I know basic Java concepts, syntax and OOP, and I have done (too much) nonsense in existing projects in JSP. I am already using SVN and GIT, but like coding PHP and Ruby mostly via VIM, i’ve also done versioning from the command line. But this time I want to learn to build a new project from the ground up, in a more, let’s say, academic way (instead of the hackery to date). Looking at e. g. Eclipse frightens me. Then there is Struts, Spring, JPA, Hibernate, Seam, just to throw in some buzzwords, that I cannot put into clear relation to each other. Can you point me to some tutorials or books that could help me? What are the technologies you absolutely have to know, the JSRs that are widely implemented in the industry? Or, if you are an employer: What does a “Junior Java Web developer” have to know? Thanks for your suggestions!

    Read the article

  • Mac OS can't connect to SMB shares after sleep

    - by Andreas
    I used to access my local Windows 2008 file server's SMB shares on my recent (3 weeks old) MacBook Pro without problems. However, for a few days now, it fails to (re-)connect to the server after it woke up from sleep mode. Finder just shows "connecting..." and hangs indefinitely. The same thing happens when I try it from the command line (mount -t smbfs). This happens via both WiFi and cable, I also tried turning networking off and back on. The only thing that helps is a reboot. Any hints?

    Read the article

  • Windows Phone 7 ActiveSync error 86000C09 (My First Post!)

    - by Chris Heacock
    Hello fellow geeks! I'm kicking off this new blog with an issue that was a real nuisance, but was relatively easy to fix. During a recent Exchange 2003 to 2010 migration, one of the users was getting an error on his Windows Phone 7 device. The error code that popped up on the phone on every sync attempt was 86000C09 We tested the following: Different user on the same device: WORKED Problem user on a different device: FAILED   Seemed to point (conclusively) at the user's account as the crux of the issue. This error can come up if a user has too many devices syncing, but he had no other phones. We verified that using the following command: Get-ActiveSyncDeviceStatistics -Identity USERID Turns out, it was the old familiar inheritable permissions issue in Active Directory. :-/ This user was not an admin, nor had he ever been one. HOWEVER, his account was cloned from an ex-admin user, so the unchecked box stayed unchecked. We checked the box and voila, data started flowing to his device(s). Here's a refresher on enabling Inheritable permissions: Open ADUC, and enable Advanced Features: Then open properties and go to the Security tab for the user in question: Click on Advanced, and the following screen should pop up: Verify that "Include inheritable permissions from this object's parent" is *checked*.   You will notice that for certain users, this box keeps getting unchecked. This is normal behavior due to the inbuilt security of Active Directory. People that are in the following groups will have this flag altered by AD: Account Operators Administrators Backup Operators Domain Admins Domain Controllers Enterprise Admins Print Operators Read-Only Domain Controllers Replicator Schema Admins Server Operators Once the box is cheked, permissions will flow and the user will be set correctly. Even if the box is unchecked, they will function normally as they now has the proper permissions configured. You need to perform this same excercise when enabling users for Lync, but that's another blog. :-)   -Chris

    Read the article

  • CodePlex Daily Summary for Tuesday, November 15, 2011

    CodePlex Daily Summary for Tuesday, November 15, 2011Popular ReleasesTHE NVL Maker: The NVL Maker Ver 3.10: 3.10 ??? ???: ·????????? ·????????? ·???“TJS”?“??”“EXP”?????“???”,???????? ·???“????”???,???????@if~@elsif~@else~@endif????? ·TJS????????? ·???????????else?endif??? ??: ·???FantasyDR?????????Wizard.exe(?????:http://code.google.com/p/nvlmaker-wizard/) ·KAGConfigEx2.exe??(?????:http://kcddp.keyfc.net/bbs/viewthread.php?tid=1374&extra=page%3D1) ·??????????skin??? ????: ·mapbutton????EXP??(??macro_map.ks) ·??????????AnimPlayer.ks?system????(??????AnimPlayer.ks???macro.ks) ·??????????????,?????...CreateHandouts: Latest Version: Latest VersionSQL Monitor - tracking sql server activities: SQLMon 4.1 alpha2: 1. improved object search, escape special characters, support search histories, and remember search option. 2. allow user to set connection time out. 3. allow user to drag & drop sql text or file to editors.SCCM Client Actions Tool: SCCM Client Actions Tool v0.8: SCCM Client Actions Tool v0.8 is currently the latest version. It comes with following changes since last version: Added "Wake On LAN" action. WOL.EXE is now included. Added new action "Get all active advertisements" to list all machine based advertisements on remote computers. Added new action "Get all active user advertisements" to list all user based advertisements for logged on users on remote computers. Added config.ini setting "enablePingTest" to control whether ping test is ru...Windows Azure SDK for PHP: Windows Azure SDK for PHP v4.0.4: INSTALLATION Windows Azure SDK for PHP requires no special installation steps. Simply download the SDK, extract it to the folder you would like to keep it in, and add the library directory to your PHP include_path. INSTALLATION VIA PEAR Maarten Balliauw provides an unofficial PEAR channel via http://www.pearplex.net. Here's how to use it: New installation: pear channel-discover pear.pearplex.net pear install pearplex/PHPAzure Or if you've already installed PHPAzure before: pear upgrade p...QuickGraph, Graph Data Structures And Algorithms for .Net: 3.6.61116.0: Portable library build that allows to use QuickGraph in any .NET environment: .net 4.0, silverlight 4.0, WP7, Win8 Metro apps.Devpad: 4.7: Whats new for Devpad 4.7: New export to Rich Text New export to FlowDocument Minor Bug Fix's, improvements and speed upsWeapsy: 0.4.1 Alpha: Edit Text bug fixedDesktop Google Reader: 1.4.2: This release remove the like and the broadcast buttons as Google Reader stopped supporting them (no, we don't like this decission...) Additionally and to have at least a small plus: the login window now automaitcally logs you in if you stored username and passwort (no more extra click needed) Finally added WebKit .NET to the about window and removed Awesomium MD5-Hash: 5fccf25a2fb4fecc1dc77ebabc8d3897 SHA-Hash: d44ff788b123bd33596ad1a75f3b9fa74a862fdbFluent Validation for .NET: 3.2: Changes since 3.1: Fixed issue #7084 (NotEmptyValidator does not work with EntityCollection<T>) Fixed issue #7087 (AbstractValidator.Custom ignores RuleSets and always runs) Removed support for WP7 for now as it doesn't support co/contravariance without crashing.RDRemote: Remote Desktop remote configurator V 1.0.0: Remote Desktop remote configurator V 1.0.0Rawr: Rawr 4.2.7: This is the Downloadable WPF version of Rawr!For web-based version see http://elitistjerks.com/rawr.php You can find the version notes at: http://rawr.codeplex.com/wikipage?title=VersionNotes Rawr AddonWe now have a Rawr Official Addon for in-game exporting and importing of character data hosted on Curse. The Addon does not perform calculations like Rawr, it simply shows your exported Rawr data in wow tooltips and lets you export your character to Rawr (including bag and bank items) like Char...VidCoder: 1.2.2: Updated Handbrake core to svn 4344. Fixed the 6-channel discrete mixdown option not appearing for AAC encoders. Added handling for possible exceptions when copying to the clipboard, added retries and message when it fails. Fixed issue with audio bitrate UI not appearing sometimes when switching audio encoders. Added extra checks to protect against reported crashes. Added code to upgrade encoding profiles on old queued items.Media Companion: MC 3.422b Weekly: Ensure .NET 4.0 Full Framework is installed. (Available from http://www.microsoft.com/download/en/details.aspx?id=17718) Ensure the NFO ID fix is applied when transitioning from versions prior to 3.416b. (Details here) TV Show Resolutions... Made the TV Shows folder list sorted. Re-visibled 'Manually Add Path' in Root Folders. Sorted list to process during new tv episode search Rebuild Movies now processes thru folders alphabetically Fix for issue #208 - Display Missing Episodes is not popu...DotSpatial: DotSpatial Release Candidate 1 (1.0.823): Supports loading extensions using System.ComponentModel.Composition. DemoMap compiled as x86 so that GDAL runs on x64 machines. How to: Use an Assembly from the WebBe aware that your browser may add an identifier to downloaded files which results in "blocked" dll files. You can follow the following link to learn how to "Unblock" files. Right click on the zip file before unzipping, choose properties, go to the general tab and click the unblock button. http://msdn.microsoft.com/en-us/library...XPath Visualizer: XPathVisualizer v1.3 Latest: This is v1.3.0.6 of XpathVisualizer. This is an update release for v1.3. These workitems have been fixed since v1.3.0.5: 7429 7432 7427MSBuild Extension Pack: November 2011: Release Blog Post The MSBuild Extension Pack November 2011 release provides a collection of over 415 MSBuild tasks. A high level summary of what the tasks currently cover includes the following: System Items: Active Directory, Certificates, COM+, Console, Date and Time, Drives, Environment Variables, Event Logs, Files and Folders, FTP, GAC, Network, Performance Counters, Registry, Services, Sound Code: Assemblies, AsyncExec, CAB Files, Code Signing, DynamicExecute, File Detokenisation, GU...Extensions for Reactive Extensions (Rxx): Rxx 1.2: What's NewRelated Work Items Please read the latest release notes for details about what's new. Content SummaryRxx provides the following features. See the Documentation for details. Many IObservable<T> extension methods and IEnumerable<T> extension methods. Many useful types such as ViewModel, CommandSubject, ListSubject, DictionarySubject, ObservableDynamicObject, Either<TLeft, TRight>, Maybe<T> and others. Various interactive labs that illustrate the runtime behavior of the extensio...Facebook C# SDK: v5.3.2: This is a RTW release which adds new features and bug fixes to v5.2.1. Query/QueryAsync methods uses graph api instead of legacy rest api. removed dependency from Code Contracts enabled Task Parallel Support in .NET 4.0+ (experimental) added support for early preview for .NET 4.5 (binaries not distributed in codeplex nor nuget.org, will need to manually build from Facebook-Net45.sln) added additional method overloads for .NET 4.5 to support IProgress<T> for upload progress added ne...Delete Inactive TS Ports: List and delete the Inactive TS Ports: UPDATEAdded support for windows 2003 servers and removed some null reference errors when the registry key was not present List and delete the Inactive TS Ports - The InactiveTSPortList.EXE accepts command line arguments The InactiveTSPortList.Standalone.WithoutPrompt.exe runs as a standalone exe without the need for any command line arguments.New ProjectsAFNC: testArithmetics: arithmetics for silverlight use note pattern by time streamAzon.Library: A collection of extensions, static helpers, AOP attributes. More will added as the project will go on.Chat TextBlock Control: A windows phone 7.1 control Resemble those chat balloon textblocks in the SMS appDiamond Framework: Diamond Framework an Common framework for Diamond Group.DNN Social Helpers: DNN Social HelpersDragon: DragonEasy Video Cropper: A simple application to make cropping videos easy for anyone. - Automatically detects black lines - Uses FFMPEGFluent Resource Mapper: This project aims to develop a framework to assist the internationalization of software using the paradigm Convetion over Configuration.Fully Observable: This project is to create an improved set of observable collections. It provides notifications for when items inside the collection change as well as when the collection itself changes.grpcmnq: no summary at allMathTool: Math tool for silverlight we plan will heve three point .matrix .differential equation .equation of locusnopCommerce Buckaroo payment provider plugin: This is a payment provider plugin for the dutch payment provider BUCKAROO. This plugin is developed and tested for nopCommerce version 2+ Phoenix MVVM+C Framework: Phoenix MVVM+C Framework PowerLib: PowerLib extends system .net library.RDRemote: This utility allows to enable the Remote Desktop connections from a remote computer using WMI.Sencha Touch Mini Workflow Framework: A workflow framework for Sencha Touch mobile apps including automatic component management ShWP: helper library for Windows PhoneTimer, Cronômetro e Despertador: Projeto desenvolvido no curso de extensão de C# da UFSCar SorocabaUtilityLibrary.Ajax: AjaxUtilityLibrary.Email: emailUtilityLibrary.FormBase: UtilityLibrary.FormBaseUtilityLibrary.Http: UtilityLibrary for HttpWebRequestUtilityLibrary.Ormapping: ormappingVoiceModel: VoiceModel is a project which make it easier to develop VoiceXML applications using ASP.Net MVC with Razor. It uses the MVVM (Model-View-VoiceModel) design pattern to abstract the voice application to a higher level. It is developed in C# and Razor.WebSite.Request: WebSite.Request launch web request (via XMLHTTP) on website. Use, for example, to make initial request to sharepoint URL and escape "slow first request" problem.Where's my lei, man?: Where's my lei, man?Zombsquare: Aplicación de ejemplo para Windows Phone utilizada en el Windows Phone Roadshow realizado en España en 2011, en esta solución podras encontra ejemplos de: -Diseño en Blend -BingMaps -GeoLocalizacion -Realidad Aumentada -Converters -Mini-trivial -Serialización de objetos ... resistir un apocalipsis Zombie...

    Read the article

  • Trouble using Upstart to launch Redis as redis user

    - by Chris
    I'm trying to launch redis-server as a user (called redis) via Upstart. My /etc/init/redis-server.conf looks like this: description "redis server" start on runlevel [23] stop on shutdown exec sudo -u redis /usr/local/bin/redis-server /var/lib/redis/redis.conf Looks good, right? I start redis-server using $start redis-server redis-server start/running, process 16808 $redis-cli Could not connect to Redis at 127.0.0.1:6379: Connection refused $ps ax | grep ps 168 16810 tty1 R+ 0:00 ps ax 16811 tty1 S+ 0:00 grep 168 So redis-server definitely isn't running. Let's try executing the Upstart command by hand, shall we? exec sudo -u redis /usr/local/bin/redis-server /var/lib/redis/redis.conf [16852] 19 Jun 10:37:21 # Can't chdir to './': Permission denied Connection to 10.19.2.94 closed. And then I get logged off. I'm at a loss. Any ideas?

    Read the article

  • Fedora 12 - login panel: disable automatic login

    - by ThreaderSlash
    Hello Everybody I have just replaced my FC11 by the FC12. To put skype up and running I used autoten and choose to not have the automatic login enable. After running it the skype was working nicely. However the next time I restarted the machine, on the login panel appeared ""automatic login"" option. I went to /etc/gdm/custom.conf and added the command AutomaticLoginEnable=false Restart the system and although automatic login isn't active anymore, the ""automatic login"" option still appears as if it were an option to be picked from the login panel. I googled around but didn't find how to get rid of it. Any suggestions? All comments are highly appreciated.

    Read the article

  • Download and Share Visual Studio Color Schemes

    - by ScottGu
    As developers we often spend a large part of our day staring at code within Visual Studio.  If you are like me, after awhile the default VS text color scheme starts to get a little boring. The good news is that Visual Studio allows you to completely customize the editor background and text colors to whatever you want – allowing you to tweak them to create the experience that is “just right” for your eyes and personality.  You can then optionally export/import your color scheme preferences to an XML file via the Tools->Import and Export Settings menu command. [In addition to blogging, I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu] New website that makes it easy to download and share VS color schemes Luke Sampson launched the http://studiostyles.info/ site a week ago (built using ASP.NET MVC 2, ASP.NET 4 and VS 2010). Studiostyles.info enables you to easily browse and download Visual Studio color schemes that others have already created.  The color schemes work for both VS 2008 and VS 2010 (all versions – including the free VS express editions): Color schemes are sorted by popularity and voting (you can vote on whether you find each “hot or not”).  You can click any of the schemes to see screen-shots of it in use for common coding scenarios.  You can then download the color settings for either VS 2010 or VS 2008: You can also optionally upload color schemes of your own if you have a good one you want to share with others.  If you haven’t visited it yet – check it out: http://studiostyles.info/  And thank you Luke Sampson for building it! Hope this helps, Scott

    Read the article

  • I can't finish installation of 12.10 on Windows 8

    - by Janna Zhou
    When I followed the instruction to install Ubuntu 12.10 with wubi, the come out window ask me to reboot the computer to finish the installation. I followed the instruction and stopped with the message I have left below. Could you please tell me how to finish installation? I'm worried if I follow the instruction below to remove_hiberfile in Windows it would result in a failure to boot my Window 8 system: Completing the Ubuntu installation. For more installation boot options, press 'ESC'now... 0 Busy Box v1.19.3 (Ubuntu 1:1.19.3-7ubuntu1) built-in shell (ash) Enter 'help' for a list of built-in commands. (initramfs) windows is hibernated, refused to mount. Failed to mount '/dev/sda2/: Operation not permitted the NTFS partition is hibernated. Please resume and shutdown Windows properly, or mount the volume read-only with the 'ro' mount option, or mount the volume read-write with the 'remove_hiberfile' mount option. For example type on the command line: mount -t ntsfs-3g -0 remove_hiberfile/dev/sda2/isodevice mount:mounting/dev/sda2 on /isodevice failed: No such device Could not find the ISO/ubuntu/install/installation.iso This could also happen if the file system is not clean because of an operating system crash, an interrupted boot process, an improper shutdown, or unplugging of a removable device without first unmounting or ejecting it. To fix this, simply reboot into windows, let it fully start, log in, run 'chkdsk/r', then gracefully shut down and reboot back into Windows. After this you should be able to reboot again and resume the installation.

    Read the article

  • Problem with RAID5 (mdadm) - disk detached

    - by poscaman
    Having these lines in /var/log/syslog Apr 18 16:53:05 Server kernel: [4487878.816036] ata4: EH in SWNCQ mode,QC:qc_active 0x1 sactive 0x1 Apr 18 16:53:05 Server kernel: [4487878.816058] ata4: SWNCQ:qc_active 0x1 defer_bits 0x0 last_issue_tag 0x0 Apr 18 16:53:05 Server kernel: [4487878.816059] dhfis 0x1 dmafis 0x1 sdbfis 0x0 Apr 18 16:53:05 Server kernel: [4487878.816093] ata4: ATA_REG 0x40 ERR_REG 0x0 Apr 18 16:53:05 Server kernel: [4487878.816108] ata4: tag : dhfis dmafis sdbfis sacitve Apr 18 16:53:05 Server kernel: [4487878.816125] ata4: tag 0x0: 1 1 0 1 Apr 18 16:53:05 Server kernel: [4487878.816150] ata4.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen Apr 18 16:53:05 Server kernel: [4487878.816178] ata4.00: failed command: WRITE FPDMA QUEUED Apr 18 16:53:05 Server kernel: [4487878.816199] ata4.00: cmd 61/08:00:00:88:e0/00:00:e8:00:00/40 tag 0 ncq 4096 out Apr 18 16:53:05 Server kernel: [4487878.816200] res 40/00:00:01:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) Apr 18 16:53:05 Server kernel: [4487878.816253] ata4.00: status: { DRDY } Apr 18 16:53:05 Server kernel: [4487878.816272] ata4: hard resetting link Apr 18 16:53:05 Server kernel: [4487878.816274] ata4: nv: skipping hardreset on occupied port Apr 18 16:53:06 Server kernel: [4487879.676029] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 18 16:53:07 Server kernel: [4487880.416749] ata4.00: n_sectors mismatch 3907029168 != 268435455 Apr 18 16:53:07 Server kernel: [4487880.416752] ata4.00: revalidation failed (errno=-19) Apr 18 16:53:07 Server kernel: [4487880.416773] ata4.00: limiting speed to UDMA/133:PIO2 Apr 18 16:53:11 Server kernel: [4487884.676024] ata4: hard resetting link Apr 18 16:53:11 Server kernel: [4487884.676027] ata4: nv: skipping hardreset on occupied port Apr 18 16:53:12 Server kernel: [4487885.144032] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 18 16:53:12 Server kernel: [4487885.240185] ata4.00: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80) Apr 18 16:53:12 Server kernel: [4487885.240190] ata4.00: revalidation failed (errno=-5) Apr 18 16:53:12 Server kernel: [4487885.240210] ata4.00: disabled Apr 18 16:53:17 Server kernel: [4487890.144023] ata4: hard resetting link Apr 18 16:53:17 Server kernel: [4487891.024033] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 18 16:53:17 Server kernel: [4487891.033357] ata4.00: ATA-8: WDC WD20EARS-00S8B1, 80.00A80, max UDMA/133 Apr 18 16:53:17 Server kernel: [4487891.033360] ata4.00: 3907029168 sectors, multi 1: LBA48 NCQ (depth 31/32) Apr 18 16:53:17 Server kernel: [4487891.048347] ata4.00: configured for UDMA/133 Apr 18 16:53:17 Server kernel: [4487891.048361] sd 3:0:0:0: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE Apr 18 16:53:17 Server kernel: [4487891.048365] sd 3:0:0:0: [sdc] Sense Key : Aborted Command [current] [descriptor] Apr 18 16:53:17 Server kernel: [4487891.048369] Descriptor sense data with sense descriptors (in hex): Apr 18 16:53:17 Server kernel: [4487891.048371] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 Apr 18 16:53:17 Server kernel: [4487891.048378] 00 00 00 00 Apr 18 16:53:17 Server kernel: [4487891.048382] sd 3:0:0:0: [sdc] Add. Sense: No additional sense information Apr 18 16:53:17 Server kernel: [4487891.048385] sd 3:0:0:0: [sdc] CDB: Write(10): 2a 00 e8 e0 88 00 00 00 08 00 Apr 18 16:53:17 Server kernel: [4487891.048393] end_request: I/O error, dev sdc, sector 3907028992 Apr 18 16:53:17 Server kernel: [4487891.048420] sd 3:0:0:0: rejecting I/O to offline device Apr 18 16:53:17 Server kernel: [4487891.048440] sd 3:0:0:0: rejecting I/O to offline device Apr 18 16:53:17 Server kernel: [4487891.048458] end_request: I/O error, dev sdc, sector 3907028992 Apr 18 16:53:17 Server kernel: [4487891.048477] md: super_written gets error=-5, uptodate=0 Apr 18 16:53:17 Server kernel: [4487891.048482] raid5: Disk failure on sdc, disabling device. Apr 18 16:53:17 Server kernel: [4487891.048483] raid5: Operation continuing on 3 devices. Apr 18 16:53:17 Server kernel: [4487891.048525] ata4: EH complete Apr 18 16:53:17 Server kernel: [4487891.048554] sd 3:0:0:0: rejecting I/O to offline device Apr 18 16:53:17 Server kernel: [4487891.048576] sd 3:0:0:0: rejecting I/O to offline device Apr 18 16:53:17 Server kernel: [4487891.048596] sd 3:0:0:0: rejecting I/O to offline device Apr 18 16:53:17 Server kernel: [4487891.048615] sd 3:0:0:0: [sdc] READ CAPACITY(16) failed Apr 18 16:53:17 Server kernel: [4487891.048617] sd 3:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK Apr 18 16:53:17 Server kernel: [4487891.048620] sd 3:0:0:0: [sdc] Sense not available. Apr 18 16:53:17 Server kernel: [4487891.048624] sd 3:0:0:0: rejecting I/O to offline device Apr 18 16:53:17 Server kernel: [4487891.048643] sd 3:0:0:0: rejecting I/O to offline device Apr 18 16:53:17 Server kernel: [4487891.048663] sd 3:0:0:0: rejecting I/O to offline device Apr 18 16:53:17 Server kernel: [4487891.048681] sd 3:0:0:0: [sdc] READ CAPACITY failed Apr 18 16:53:17 Server kernel: [4487891.048683] sd 3:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK Apr 18 16:53:17 Server kernel: [4487891.048685] sd 3:0:0:0: [sdc] Sense not available. Apr 18 16:53:17 Server kernel: [4487891.048689] sd 3:0:0:0: rejecting I/O to offline device Apr 18 16:53:17 Server kernel: [4487891.048709] sd 3:0:0:0: rejecting I/O to offline device Apr 18 16:53:17 Server kernel: [4487891.048800] sd 3:0:0:0: rejecting I/O to offline device Apr 18 16:53:17 Server kernel: [4487891.048860] sd 3:0:0:0: rejecting I/O to offline device Apr 18 16:53:17 Server kernel: [4487891.049028] sd 3:0:0:0: [sdc] Asking for cache data failed Apr 18 16:53:17 Server kernel: [4487891.049048] sd 3:0:0:0: [sdc] Assuming drive cache: write through Apr 18 16:53:17 Server kernel: [4487891.049071] sdc: detected capacity change from 2000398934016 to 0 Apr 18 16:53:17 Server kernel: [4487891.049080] ata4.00: detaching (SCSI 3:0:0:0) Apr 18 16:53:18 Server kernel: [4487891.061149] sd 3:0:0:0: [sdc] Stopping disk Apr 18 16:53:18 Server kernel: [4487891.485492] RAID5 conf printout: Apr 18 16:53:18 Server kernel: [4487891.485496] --- rd:4 wd:3 Apr 18 16:53:18 Server kernel: [4487891.485500] disk 0, o:1, dev:sdb Apr 18 16:53:18 Server kernel: [4487891.485502] disk 1, o:0, dev:sdc Apr 18 16:53:18 Server kernel: [4487891.485504] disk 2, o:1, dev:sdd Apr 18 16:53:18 Server kernel: [4487891.485506] disk 3, o:1, dev:sde Apr 18 16:53:18 Server kernel: [4487891.497014] RAID5 conf printout: Apr 18 16:53:18 Server kernel: [4487891.497016] --- rd:4 wd:3 Apr 18 16:53:18 Server kernel: [4487891.497018] disk 0, o:1, dev:sdb Apr 18 16:53:18 Server kernel: [4487891.497019] disk 2, o:1, dev:sdd Apr 18 16:53:18 Server kernel: [4487891.497021] disk 3, o:1, dev:sde Apr 18 16:53:18 Server kernel: [4487891.838719] scsi 3:0:0:0: Direct-Access ATA WDC WD20EARS-00S 80.0 PQ: 0 ANSI: 5 Apr 18 16:53:18 Server kernel: [4487891.838886] sd 3:0:0:0: Attached scsi generic sg3 type 0 Apr 18 16:53:18 Server kernel: [4487891.838911] sd 3:0:0:0: [sdf] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) Apr 18 16:53:18 Server kernel: [4487891.838964] sd 3:0:0:0: [sdf] Write Protect is off Apr 18 16:53:18 Server kernel: [4487891.838967] sd 3:0:0:0: [sdf] Mode Sense: 00 3a 00 00 Apr 18 16:53:18 Server kernel: [4487891.838988] sd 3:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Apr 18 16:53:20 Server kernel: [4487891.839147] sdf: unknown partition table Apr 18 16:53:20 Server kernel: [4487893.130026] sd 3:0:0:0: [sdf] Attached SCSI disk Right now, i'm unable to do anything on /dev/sdc. Is there any way to try to re-attach it? I don't want to power-down the server unless absolutely necessary System: Debian Stable 2.6.32-5-amd64 mdadm version 3.1.4-1+8efb9d1 cat /proc/mdstat Personalities : [raid6] [raid5] [raid4] md0 : active raid5 sdb[0] sdc[4](F) sde[3] sdd[2] 5860543488 blocks level 5, 64k chunk, algorithm 2 [4/3] [U_UU] unused devices: <none> mdadm --examine --scan ARRAY /dev/md0 UUID=1a7744b5:912ec7af:f82a9565:e3b453b4

    Read the article

  • How can I repair the Windows 8 EFI Bootloader?

    - by Superuser
    I installed Windows 7 and Windows 8 in EFI mode on a hard disk some days ago. Today, the bootloader got missing/corrupted. I currently have the Windows 8 installer on a flash drive and tried using the Automatic Repair option to repair the bootloader but it didn't do anything. The Startup Repair option is also missing in the Windows 8 installer. How I can repair/recreate the EFI bootloader from the Command Prompt? BCDEDIT returns the following message: The requested system device cannot be found.

    Read the article

  • SGE: invoking qmake raises "critical error: can't resolve group"

    - by Pierre
    I'm new to SGE an I'm trying to run qmake with the simple following Makefile with our very new cluster: merge.txt: job1.txt job2.txt job3.txt ... cat $^ > $@ job1.txt: sleep 1 echo "Hello From " $@ > $@ sleep 1 job2.txt: sleep 2 echo "Hello From " $@ > $@ sleep 2 job3.txt: (...) the following command raises an error: qmake -l arch=lx24-amd64 -cwd -v PATH -- -j 4 sleep 1 dynamic mode sleep 2 dynamic mode sleep 3 dynamic mode sleep 4 dynamic mode critical error: can't resolve group qmake: *** [job3.txt] Error 1 critical error: can't resolve group qmake: *** [job2.txt] Error 1 critical error: can't resolve group qmake: *** [job1.txt] Error 1 critical error: can't resolve group what's wrong ?

    Read the article

  • kernel panic with exitcode=0x00000004 and no call trace

    - by litmusconfig
    A bit of background first - I'm trying to configure a MicroBlaze Linux (big-endian version) system on a Xilinx ML506 eval board. The goal is to use the second partition of a CompactFlash card attached to the Xilinx SystemACE controller. So far, root in initramfs works and after boot, I can mount and use said partition, no problem. But if I try to use it right from the getgo with the "root=/dev/xsa2" kernel command line parameter, the system hangs with [...] Freeing unused kernel memory: 143k freed Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004 And that's it - no regdump, no call trace, no further nothing from the serial console, even though kernel has been configured with debugging enabled. Now, I'm pretty new at this, so is there something else I should be doing to see something more informative from the kernel?

    Read the article

  • problem opening eclipse

    - by Marchosius
    I'm having a problem loading Eclipise in 12.04. I loaded the error log and this was inside: !SESSION 2012-09-03 16:52:09.742 ----------------------------------------------- eclipse.buildId=I20110613-1736 java.version=1.7.0_07 java.vendor=Oracle Corporation BootLoader constants: OS=linux, ARCH=x86_64, WS=gtk, NL=en_GB Command-line arguments: -os linux -ws gtk -arch x86_64 !ENTRY org.eclipse.osgi 4 0 2012-09-03 16:52:11.317 !MESSAGE Application error !STACK 1 java.lang.UnsatisfiedLinkError: Could not load SWT library. Reasons: no swt-gtk-3740 in java.library.path no swt-gtk in java.library.path Can't load library: /home/marcel/.swt/lib/linux/x86_64/libswt-gtk-3740.so Can't load library: /home/marcel/.swt/lib/linux/x86_64/libswt-gtk.so at org.eclipse.swt.internal.Library.loadLibrary(Library.java:285) at org.eclipse.swt.internal.Library.loadLibrary(Library.java:194) at org.eclipse.swt.internal.C.<clinit>(C.java:21) at org.eclipse.swt.internal.Converter.wcsToMbcs(Converter.java:63) at org.eclipse.swt.internal.Converter.wcsToMbcs(Converter.java:54) at org.eclipse.swt.widgets.Display.<clinit>(Display.java:132) at org.eclipse.ui.internal.Workbench.createDisplay(Workbench.java:695) at org.eclipse.ui.PlatformUI.createDisplay(PlatformUI.java:161) at org.eclipse.ui.internal.ide.application.IDEApplication.createDisplay(IDEApplication.java:153) at org.eclipse.ui.internal.ide.application.IDEApplication.start(IDEApplication.java:95) at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:196) at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:110) at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:79) at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:344) at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source) at java.lang.reflect.Method.invoke(Unknown Source) at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:622) at org.eclipse.equinox.launcher.Main.basicRun(Main.java:577) at org.eclipse.equinox.launcher.Main.run(Main.java:1410) at org.eclipse.equinox.launcher.Main.main(Main.java:1386) I had openJDK installed and to remove and replace with Oracle Java to install Aptana Studio. This thread explains it all. So now reinstalled OpenJDK, this might give some insight to the problem?

    Read the article

  • Microsoft Visual Studio Team Explorer 2010 codename “Eaglestone”

    - by HosamKamel
    Microsoft has released the beta release of Microsoft Visual Studio Team Explorer 2010 codename “Eaglestone”, the Eclipse plugin and cross-platform command line assets that were acquired from Teamprise back in November. You can download the bits here, and participate in the associated Microsoft Connect community here. Changes done in this release : All of the architectural changes in TFS 2010 has been reacted, which primarily shows up in our support for Team Project Collections but it also means that the Eclipse plug-in supports all the configurations for project portal and reporting services that are possible (including not having any configured at all) Added the enhanced work item linking and hierarchy capabilities.  You can now define typed links, query for work items based on links, and work with work item hierarchies. Added support for the new WF-based team build Have reacted to a lot of underlying changes in the source control version model with respect to how branching, merging, and renames happen. History now follows branches and merges. Branches are proper first class citizens in the source control explorer. You can check a detailed post written  by bharry here Microsoft Visual Studio Team Explorer 2010 codename “Eaglestone”

    Read the article

< Previous Page | 588 589 590 591 592 593 594 595 596 597 598 599  | Next Page >