Search Results

Search found 32610 results on 1305 pages for 'internet options'.

Page 593/1305 | < Previous Page | 589 590 591 592 593 594 595 596 597 598 599 600  | Next Page >

  • Install a web certificate on an Android device

    - by martani_net
    To gain access to WIFI at university I have to login with my user/pass credentials. The certificate of their website (the local home page that asks for the credentials) is not recognized as a trusted certificate, so we install it separately on our computers. The problem is that I don't take my laptop with me often to university, so I usually want to connect using my HTC Magic, but I have no clue on how to install the certificate separately on Android, it is always rejected. [Edit2] : this is what is stated in their website Need for installation of official certificates CyberTrust validated by the CRU (http://www.cru.fr/wiki/scs/) The certificates contain information certified to generate encryption keys for data exchange, called "sensitive" as the password of a user. By connecting to CanalIP-UPMC, for example, the user must validate the identity of the server accepting the certificate appears on the screen in a "popup window". In reality, the user is unable to validate a certificate knowing, because a simple visual check of the license is impossible. Therefore, the certificates of the certification authority (CRU-Cybertrust Educationnal-ca.ca Cybertrust and-global-root-ca.ca) must be installed prior to the browser for the validity of the certificate server can be controlled automatically. Before you connect to the network-UPMC CanalIP you must register in your browser through the certification authority Cybertrust-Educationnal-ca.ca Download the Cybertrust-Educationnal-ca.ca, depending on your browser and select the link below : With Internet Explorer, click on the link following. With Firefox, click on the link following. With Safari, click the link following. If this procedure is not respected, a real risk is incurred by the user: that of being robbed password LDAP directory UPMC. A malicious server may in fact try very easily attack type "man-in-the-middle" by posing as the legitimate server at UPMC. The theft of a password allows the attacker to steal an identity for transactions over the Internet can engage the responsibility of the user trapped ... This is their website : http://www.canalip.upmc.fr/doc/Default.htm (in French, Google-translate it :)) Anyone knows how to install a web certificate on Android?

    Read the article

  • Can't create directory named "mysql" in subversion repository

    - by High Ball
    I have a particular problem with subversion. Environment: subversion (1.6.12dfsg-6), apache2 (2.2.16-6+squeeze7) + mod dav_svn. I can't create a directory named "mysql" or "testmysql" or add and commit a file named "mysql.txt" in my repository. There are many references to "subversion PROPSET 403 forbidden" problems in google and so on. But I can use all functions of subversion. I can also create a directory named "hugo" or "test". My repository works properly. Only "mysql" doesn't work. The following errors occur: The server encountered an unexpected return value (403 Forbidden) in response to the request for MKCOL »/svn/repository/!svn/wrk/8123484e-8890-412d-92ed-62ceabcd4189 /etc/mysql" returned /var/log/apache2/access.log 192.168.178.200 - - [time] "OPTIONS /svn/repository/etc HTTP/1.1" 401 6156 "-" "SVN/1.6.12 (r955767) neon/0.29.3" 192.168.178.200 - user1 [time] "OPTIONS /svn/repository/etc HTTP/1.1" 200 1028 "-" "SVN/1.6.12 (r955767) neon/0.29.3" 192.168.178.200 - user1 [time] "MKACTIVITY /svn/repository/!svn/act/6564e2e2-19be-4a09-bcb6-61a1cfb097e8 HTTP/1.1" 201 676 "-" "SVN/1.6.12 (r955767) neon/0.29.3" 192.168.178.200 - user1 [time] "PROPFIND /svn/repository/etc HTTP/1.1" 207 676 "-" "SVN/1.6.12 (r955767) neon/0.29.3" 192.168.178.200 - user1 [time] "CHECKOUT /svn/repository/!svn/vcc/default HTTP/1.1" 201 692 "-" "SVN/1.6.12 (r955767) neon/0.29.3" 192.168.178.200 - user1 [time] "PROPPATCH /svn/repository/!svn/wbl/6564e2e2-19be-4a09-bcb6-61a1cfb097e8/157 HTTP/1.1" 207 580 "-" "SVN/1.6.12 (r955767) neon/0.29.3" 192.168.178.200 - user1 [time] "PROPFIND /svn/repository/etc HTTP/1.1" 207 564 "-" "SVN/1.6.12 (r955767) neon/0.29.3" 192.168.178.200 - user1 [time] "CHECKOUT /svn/repository/!svn/ver/157/etc HTTP/1.1" 201 692 "-" "SVN/1.6.12 (r955767) neon/0.29.3" 192.168.178.200 - user1 [time] "MKCOL /svn/repository/!svn/wrk/6564e2e2-19be-4a09-bcb6-61a1cfb097e8/etc/mysql HTTP/1.1" 403 596 "-" "SVN/1.6.12 (r955767) neon/0.29.3" 192.168.178.200 - user1 [time] "DELETE /svn/repository/!svn/act/6564e2e2-19be-4a09-bcb6-61a1cfb097e8 HTTP/1.1" 204 165 "-" "SVN/1.6.12 (r955767) neon/0.29.3" Has anyone seen this before? Thanks for any advice.

    Read the article

  • BAT file will not run from Task Scheduler but will from Command Line

    - by wtaylor
    I'm trying to run a BAT script from Task Scheduler in Windows 2008 R2 and it runs for 3 seconds and then stops. It says it successfully completes but I know it doesn't. I can run this script from the command line directly, and it runs just fine. The bat file I'm running actually deletes files older than 7 days using "forfiles" then I'm mapping a network drive, moving the files across the network using robocopy, and then closing the network connection. I have taken the network and copy options out of the file and it still does the same thing. Here is how my file looks: rem This will delete the files from BBLEARN_stats forfiles -p "E:\BB_Maintenance_Data\DB_Backups\BBLEARN_stats" -m *.* -d -17 -c "cmd /c del @file" rem This will delete the files from BBLEARN_cms_doc forfiles -p "E:\BB_Maintenance_Data\DB_Backups\BBLEARN_cms_doc" -m *.* -d -14 -c "cmd /c del @path" rem This will delete the files from BBLEARN_admin forfiles -p "E:\BB_Maintenance_Data\DB_Backups\BBLEARN_admin" -m *.* -d -10 -c "cmd /c del @path" rem This will delete the files from BBLEARN_cms forfiles -p "E:\BB_Maintenance_Data\DB_Backups\BBLEARN_cms" -m *.* -d -10 -c "cmd /c del @path" rem This will delete the files from attendance_bb forfiles -p "E:\BB_Maintenance_Data\DB_Backups\attendance_bb" -m *.* -d -10 -c "cmd /c del @path" rem This will delete the files from BBLearn forfiles -p "E:\BB_Maintenance_Data\DB_Backups\BBLEARN" -m *.* -d -18 -c "cmd /c del @path" rem This will delete the files from Logs forfiles -p "E:\BB_Maintenance_Data\logs" -m *.* -d -10 -c "cmd /c del @path" NET USE Z: \\10.20.102.225\coursebackups\BB_DB_Backups /user:cie oly2008 ROBOCOPY E:\BB_Maintenance_Data Z: /e /XO /FFT /PURGE /NP /LOG:BB_DB_Backups.txt openfiles /disconnect /id * NET USE Z: /delete /y This is happening on 2 servers when trying to run commands from inside a BAT file. The other server is giving an error if (0xFFFFFFFF) but that file is running a CALL C:\dir\dir\file.bat -options and I've used commands like that before in Server 2003. Here is the file for this file: call C:\blackboard\apps\content-exchange\bin\batch_ImportExport.bat -f backup_batch_file.txt -l 1 -t archive NET USE Z: \\10.20.102.225\coursebackups\BB_Course_Backups /user:cie oly2008 ROBOCOPY E:\ Z: /move /e /LOG+:BB_Move_Course_Backups.txt openfiles /disconnect /id * NET USE Z: /delete /y Any help would be GREAT. Thanks

    Read the article

  • Why do I get "unsupported architecture" errors trying to install a Python library in OSX?

    - by Emma518
    I am trying to install a Python library in the Presto package, source http://www.cv.nrao.edu/~sransom/presto/ Using 'gmake fftfit' I get the following error: cd fftfit_src ; f2py-2.7 -c fftfit.pyf *.f running build running config_cc unifing config_cc, config, build_clib, build_ext, build commands --compiler options running config_fc unifing config_fc, config, build_clib, build_ext, build commands --fcompiler options running build_src build_src building extension "fftfit" sources creating /var/folders/sx/j_l_qvys4bv00_38pfvy3m8h0000gp/T/tmp9MmLz8/src.macosx-10.9-x86_64-2.7 f2py options: [] f2py: fftfit.pyf Reading fortran codes... Reading file 'fftfit.pyf' (format:free) Post-processing... Block: fftfit Block: cprof Block: fftfit Post-processing (stage 2)... Building modules... Building module "fftfit"... Constructing wrapper function "cprof"... c,amp,pha = cprof(y,[nmax,nh]) Constructing wrapper function "fftfit"... shift,eshift,snr,esnr,b,errb,ngood = fftfit(prof,s,phi,[nmax]) Wrote C/API module "fftfit" to file "/var/folders/sx/j_l_qvys4bv00_38pfvy3m8h0000gp/T/tmp9MmLz8/src.macosx-10.9-x86_64- 2.7/fftfitmodule.c" adding '/var/folders/sx/j_l_qvys4bv00_38pfvy3m8h0000gp/T/tmp9MmLz8/src.macosx-10.9-x86_64-2.7/fortranobject.c' to sources. adding '/var/folders/sx/j_l_qvys4bv00_38pfvy3m8h0000gp/T/tmp9MmLz8/src.macosx-10.9-x86_64-2.7' to include_dirs. copying /Library/Python/2.7/site-packages/numpy-1.8.2-py2.7-macosx-10.9- intel.egg/numpy/f2py/src/fortranobject.c -> /var/folders/sx/j_l_qvys4bv00_38pfvy3m8h0000gp/T/tmp9MmLz8/src.macosx-10.9-x86_64-2.7 copying /Library/Python/2.7/site-packages/numpy-1.8.2-py2.7-macosx-10.9-intel.egg/numpy/f2py/src/fortranobject.h -> /var/folders/sx/j_l_qvys4bv00_38pfvy3m8h0000gp/T/tmp9MmLz8/src.macosx-10.9-x86_64-2.7 build_src: building npy-pkg config files running build_ext customize UnixCCompiler customize UnixCCompiler using build_ext customize Gnu95FCompiler Found executable /usr/local/bin/gfortran customize Gnu95FCompiler customize Gnu95FCompiler using build_ext building 'fftfit' extension compiling C sources C compiler: /usr/bin/clang -DNDEBUG -g -fwrapv -O3 -Wall -Wstrict-prototypes -arch ppc -arch i386 -arch x86_64 -g -O2 creating /var/folders/sx/j_l_qvys4bv00_38pfvy3m8h0000gp/T/tmp9MmLz8/var creating /var/folders/sx/j_l_qvys4bv00_38pfvy3m8h0000gp/T/tmp9MmLz8/var/folders creating /var/folders/sx/j_l_qvys4bv00_38pfvy3m8h0000gp/T/tmp9MmLz8/var/folders/sx creating /var/folders/sx/j_l_qvys4bv00_38pfvy3m8h0000gp/T/tmp9MmLz8/var/folders/sx/j_l_qvys4bv00_38pfvy3m8h0000gp creating /var/folders/sx/j_l_qvys4bv00_38pfvy3m8h0000gp/T/tmp9MmLz8/var/folders/sx/j_l_qvys4bv00_38pfvy3m8h00 00gp/T creating /var/folders/sx/j_l_qvys4bv00_38pfvy3m8h0000gp/T/tmp9MmLz8/var/folders/sx/j_l_qvys4bv00_38pfvy3m8h00 00gp/T/tmp9MmLz8 creating /var/folders/sx/j_l_qvys4bv00_38pfvy3m8h0000gp/T/tmp9MmLz8/var/folders/sx/j_l_qvys4bv00_38pfvy3m8h00 00gp/T/tmp9MmLz8/src.macosx-10.9-x86_64-2.7 compile options: '-I/var/folders/sx/j_l_qvys4bv00_38pfvy3m8h0000gp/T/tmp9MmLz8/src.macosx-10.9- x86_64-2.7 -I/Library/Python/2.7/site-packages/numpy-1.8.2-py2.7-macosx-10.9- intel.egg/numpy/core/include - I/opt/local/Library/Frameworks/Python.framework/Versions/2.7/include/python2.7 -c' clang: /var/folders/sx/j_l_qvys4bv00_38pfvy3m8h0000gp/T/tmp9MmLz8/src.macosx-10.9-x86_64- 2.7/fftfitmodule.c In file included from /var/folders/sx/j_l_qvys4bv00_38pfvy3m8h0000gp/T/tmp9MmLz8/src.macosx- 10.9-x86_64-2.7/fftfitmodule.c:16: In file included from /opt/local/Library/Frameworks/Python.framework/Versions/2.7/include/python2.7/Python.h:19: In file included from /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/../lib/clang/ 5.1/include/limits.h:38: In file included from /usr/include/limits.h:63: /usr/include/sys/cdefs.h:658:2: error: Unsupported architecture #error Unsupported architecture ^ In file included from /var/folders/sx/j_l_qvys4bv00_38pfvy3m8h0000gp/T/tmp9MmLz8/src.macosx- 10.9-x86_64-2.7/fftfitmodule.c:16: In file included from /opt/local/Library/Frameworks/Python.framework/Versions/2.7/include/python2.7/Python.h:19: In file included from /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/../lib/clang/ 5.1/include/limits.h:38: In file included from /usr/include/limits.h:64: /usr/include/machine/limits.h:8:2: error: architecture not supported #error architecture not supported ^ In file included from /var/folders/sx/j_l_qvys4bv00_38pfvy3m8h0000gp/T/tmp9MmLz8/src.macosx- 10.9-x86_64-2.7/fftfitmodule.c:16: In file included from /opt/local/Library/Frameworks/Python.framework/Versions/2.7/include/python2.7/Python.h:33: In file included from /usr/include/stdio.h:67: In file included from /usr/include/_types.h:27: In file included from /usr/include/sys/_types.h:33: /usr/include/machine/_types.h:34:2: error: architecture not supported #error architecture not supported ^ In file included from /var/folders/sx/j_l_qvys4bv00_38pfvy3m8h0000gp/T/tmp9MmLz8/src.macosx- 10.9-x86_64-2.7/fftfitmodule.c:16: In file included from /opt/local/Library/Frameworks/Python.framework/Versions/2.7/include/python2.7/Python.h:33: In file included from /usr/include/stdio.h:67: In file included from /usr/include/_types.h:27: /usr/include/sys/_types.h:94:9: error: unknown type name '__int64_t' typedef __int64_t __darwin_blkcnt_t; /* total blocks */ ^ /usr/include/sys/_types.h:95:9: error: unknown type name '__int32_t' typedef __int32_t __darwin_blksize_t; /* preferred block size */ ^ /usr/include/sys/_types.h:96:9: error: unknown type name '__int32_t' typedef __int32_t __darwin_dev_t; /* dev_t */ ^ /usr/include/sys/_types.h:99:9: error: unknown type name '__uint32_t' typedef __uint32_t __darwin_gid_t; /* [???] process and group IDs */ ^ /usr/include/sys/_types.h:100:9: error: unknown type name '__uint32_t' typedef __uint32_t __darwin_id_t; /* [XSI] pid_t, uid_t, or gid_t*/ ^ /usr/include/sys/_types.h:101:9: error: unknown type name '__uint64_t' typedef __uint64_t __darwin_ino64_t; /* [???] Used for 64 bit inodes */ ^ /usr/include/sys/_types.h:107:9: error: unknown type name '__darwin_natural_t' typedef __darwin_natural_t __darwin_mach_port_name_t; /* Used by mach */ ^ /usr/include/sys/_types.h:109:9: error: unknown type name '__uint16_t' typedef __uint16_t __darwin_mode_t; /* [???] Some file attributes */ ^ /usr/include/sys/_types.h:110:9: error: unknown type name '__int64_t' typedef __int64_t __darwin_off_t; /* [???] Used for file sizes */ ^ /usr/include/sys/_types.h:111:9: error: unknown type name '__int32_t' typedef __int32_t __darwin_pid_t; /* [???] process and group IDs */ ^ /usr/include/sys/_types.h:131:9: error: unknown type name '__uint32_t' typedef __uint32_t __darwin_sigset_t; /* [???] signal set */ ^ /usr/include/sys/_types.h:132:9: error: unknown type name '__int32_t' typedef __int32_t __darwin_suseconds_t; /* [???] microseconds */ ^ /usr/include/sys/_types.h:133:9: error: unknown type name '__uint32_t' typedef __uint32_t __darwin_uid_t; /* [???] user IDs */ ^ /usr/include/sys/_types.h:134:9: error: unknown type name '__uint32_t' typedef __uint32_t __darwin_useconds_t; /* [???] microseconds */ ^ In file included from /var/folders/sx/j_l_qvys4bv00_38pfvy3m8h0000gp/T/tmp9MmLz8/src.macosx- 10.9-x86_64-2.7/fftfitmodule.c:16: In file included from /opt/local/Library/Frameworks/Python.framework/Versions/2.7/include/python2.7/Python.h:33: In file included from /usr/include/stdio.h:71: /usr/include/sys/_types/_va_list.h:31:9: error: unknown type name '__darwin_va_list'; did you mean '__builtin_va_list'? typedef __darwin_va_list va_list; ^ note: '__builtin_va_list' declared here In file included from /var/folders/sx/j_l_qvys4bv00_38pfvy3m8h0000gp/T/tmp9MmLz8/src.macosx- 10.9-x86_64-2.7/fftfitmodule.c:16: In file included from /opt/local/Library/Frameworks/Python.framework/Versions/2.7/include/python2.7/Python.h:33: In file included from /usr/include/stdio.h:72: /usr/include/sys/_types/_size_t.h:30:9: error: unknown type name '__darwin_size_t'; did you mean '__darwin_ino_t'? typedef __darwin_size_t size_t; ^ /usr/include/sys/_types.h:103:26: note: '__darwin_ino_t' declared here typedef __darwin_ino64_t __darwin_ino_t; /* [???] Used for inodes */ ^ fatal error: too many errors emitted, stopping now [-ferror-limit=] 20 errors generated. In file included from /var/folders/sx/j_l_qvys4bv00_38pfvy3m8h0000gp/T/tmp9MmLz8/src.macosx- 10.9-x86_64-2.7/fftfitmodule.c:16: In file included from /opt/local/Library/Frameworks/Python.framework/Versions/2.7/include/python2.7/Python.h:19: In file included from /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/../lib/clang/5.1/include/limits.h:38: In file included from /usr/include/limits.h:63: /usr/include/sys/cdefs.h:658:2: error: Unsupported architecture #error Unsupported architecture ^ In file included from /var/folders/sx/j_l_qvys4bv00_38pfvy3m8h0000gp/T/tmp9MmLz8/src.macosx- 10.9-x86_64-2.7/fftfitmodule.c:16: In file included from /opt/local/Library/Frameworks/Python.framework/Versions/2.7/include/python2.7/Python.h:19: In file included from /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/../lib/clang/ 5.1/include/limits.h:38: In file included from /usr/include/limits.h:64: /usr/include/machine/limits.h:8:2: error: architecture not supported #error architecture not supported ^ In file included from /var/folders/sx/j_l_qvys4bv00_38pfvy3m8h0000gp/T/tmp9MmLz8/src.macosx- 10.9-x86_64-2.7/fftfitmodule.c:16: In file included from /opt/local/Library/Frameworks/Python.framework/Versions/2.7/include/python2.7/Python.h:33: In file included from /usr/include/stdio.h:67: In file included from /usr/include/_types.h:27: In file included from /usr/include/sys/_types.h:33: /usr/include/machine/_types.h:34:2: error: architecture not supported #error architecture not supported ^ In file included from /var/folders/sx/j_l_qvys4bv00_38pfvy3m8h0000gp/T/tmp9MmLz8/src.macosx- 10.9-x86_64-2.7/fftfitmodule.c:16: In file included from /opt/local/Library/Frameworks/Python.framework/Versions/2.7/include/python2.7/Python.h:33: In file included from /usr/include/stdio.h:67: In file included from /usr/include/_types.h:27: /usr/include/sys/_types.h:94:9: error: unknown type name '__int64_t' typedef __int64_t __darwin_blkcnt_t; /* total blocks */ ^ /usr/include/sys/_types.h:95:9: error: unknown type name '__int32_t' typedef __int32_t __darwin_blksize_t; /* preferred block size */ ^ /usr/include/sys/_types.h:96:9: error: unknown type name '__int32_t' typedef __int32_t __darwin_dev_t; /* dev_t */ ^ /usr/include/sys/_types.h:99:9: error: unknown type name '__uint32_t' typedef __uint32_t __darwin_gid_t; /* [???] process and group IDs */ ^ /usr/include/sys/_types.h:100:9: error: unknown type name '__uint32_t' typedef __uint32_t __darwin_id_t; /* [XSI] pid_t, uid_t, or gid_t*/ ^ /usr/include/sys/_types.h:101:9: error: unknown type name '__uint64_t' typedef __uint64_t __darwin_ino64_t; /* [???] Used for 64 bit inodes */ ^ /usr/include/sys/_types.h:107:9: error: unknown type name '__darwin_natural_t' typedef __darwin_natural_t __darwin_mach_port_name_t; /* Used by mach */ ^ /usr/include/sys/_types.h:109:9: error: unknown type name '__uint16_t' typedef __uint16_t __darwin_mode_t; /* [???] Some file attributes */ ^ /usr/include/sys/_types.h:110:9: error: unknown type name '__int64_t' typedef __int64_t __darwin_off_t; /* [???] Used for file sizes */ ^ /usr/include/sys/_types.h:111:9: error: unknown type name '__int32_t' typedef __int32_t __darwin_pid_t; /* [???] process and group IDs */ ^ /usr/include/sys/_types.h:131:9: error: unknown type name '__uint32_t' typedef __uint32_t __darwin_sigset_t; /* [???] signal set */ ^ /usr/include/sys/_types.h:132:9: error: unknown type name '__int32_t' typedef __int32_t __darwin_suseconds_t; /* [???] microseconds */ ^ /usr/include/sys/_types.h:133:9: error: unknown type name '__uint32_t' typedef __uint32_t __darwin_uid_t; /* [???] user IDs */ ^ /usr/include/sys/_types.h:134:9: error: unknown type name '__uint32_t' typedef __uint32_t __darwin_useconds_t; /* [???] microseconds */ ^ In file included from /var/folders/sx/j_l_qvys4bv00_38pfvy3m8h0000gp/T/tmp9MmLz8/src.macosx-10.9-x86_64-2.7/fftfitmodule.c:16: In file included from /opt/local/Library/Frameworks/Python.framework/Versions/2.7/include/python2.7/Python.h:33: In file included from /usr/include/stdio.h:71: /usr/include/sys/_types/_va_list.h:31:9: error: unknown type name '__darwin_va_list'; did you mean '__builtin_va_list'? typedef __darwin_va_list va_list; ^ note: '__builtin_va_list' declared here In file included from /var/folders/sx/j_l_qvys4bv00_38pfvy3m8h0000gp/T/tmp9MmLz8/src.macosx-10.9-x86_64-2.7/fftfitmodule.c:16: In file included from /opt/local/Library/Frameworks/Python.framework/Versions/2.7/include/python2.7/Python.h:33: In file included from /usr/include/stdio.h:72: /usr/include/sys/_types/_size_t.h:30:9: error: unknown type name '__darwin_size_t'; did you mean '__darwin_ino_t'? typedef __darwin_size_t size_t; ^ /usr/include/sys/_types.h:103:26: note: '__darwin_ino_t' declared here typedef __darwin_ino64_t __darwin_ino_t; /* [???] Used for inodes */ ^ fatal error: too many errors emitted, stopping now [-ferror-limit=] 20 errors generated. error: Command "/usr/bin/clang -DNDEBUG -g -fwrapv -O3 -Wall -Wstrict-prototypes -arch ppc -arch i386 -arch x86_64 -g -O2 -I/var/folders/sx/j_l_qvys4bv00_38pfvy3m8h0000gp/T/tmp9MmLz8/src.macosx- 10.9-x86_64-2.7 -I/Library/Python/2.7/site-packages/numpy-1.8.2-py2.7-macosx-10.9- intel.egg/numpy/core/include - I/opt/local/Library/Frameworks/Python.framework/Versions/2.7/include/python2.7 -c /var/folders/sx/j_l_qvys4bv00_38pfvy3m8h0000gp/T/tmp9MmLz8/src.macosx-10.9-x86_64-2.7/fftfitmodule.c -o /var/folders/sx/j_l_qvys4bv00_38pfvy3m8h0000gp/T/tmp9MmLz8/var/folders/sx/j_l_qvys4bv00_38pfvy3m8h00 00gp/T/tmp9MmLz8/src.macosx-10.9-x86_64-2.7/fftfitmodule.o" failed with exit status 1 Makefile:5: recipe for target 'fftfit' failed gmake: *** [fftfit] Error 1 How can I solve this architecture problem?

    Read the article

  • Configuring ASP.NET MVC2 on Apache 2.2 using mod_aspdotnet

    - by user40684
    Trying to get an MVC2 website to run on Apache 2.2 web server (running on Windows) that utilizes the mod_aspdotnet module. Have several ASP.NET Virtual Hosts running, trying to add another. MVC2 has NO default page (like the first version of MVC had e.g default.aspx). I have tried various changes to the config: commented out 'DirectoryIndex', changed it to '/'. Set 'ASPNET' to 'Virtual', will not load first page, always get: '403 Forbidden, You don't have permission to access / on this server.' Below is from my http.conf: LoadModule aspdotnet_module "modules/mod_aspdotnet.so" AddHandler asp.net asax ascx ashx asmx aspx axd config cs csproj licx rem resources resx soap vb vbproj vsdisco webinfo <IfModule aspdotnet_module> # Mount the ASP.NET /asp application #AspNetMount /MyWebSiteName "D:/ApacheNET/MyWebSiteName.com" Alias /MyWebSiteName" D:/ApacheNET/MyWebSiteName.com" <VirtualHost *:80> DocumentRoot "D:/ApacheNET/MyWebSiteName.com" ServerName www.MyWebSiteName.com ServerAlias MyWebSiteName.com AspNetMount / "D:/ApacheNET/MyWebSiteName.com" # Other directives here <Directory "D:/ApacheNET/MyWebSiteName.com"> Options FollowSymlinks ExecCGI AspNet All #AspNet Virtual Files Directory Order allow,deny Allow from all DirectoryIndex default.aspx index.aspx index.html #default the index page to .htm and .aspx </Directory> </VirtualHost> # For all virtual ASP.NET webs, we need the aspnet_client files # to serve the client-side helper scripts. AliasMatch /aspnet_client/system_web/(\d+)_(\d+)_(\d+)_(\d+)/(.*) "C:/Windows /Microsoft.NET/Framework/v$1.$2.$3/ASP.NETClientFiles/$4" <Directory "C:/Windows/Microsoft.NET/Framework/v*/ASP.NETClientFiles"> Options FollowSymlinks Order allow,deny Allow from all </Directory> </IfModule> Has anyone successfully run MVC2 (or the first version of MVC) on Apache with the mod_aspdotnet module? Thanks !

    Read the article

  • NetApp FAS 2040 LDAP Win2k8R2

    - by it_stuck
    I am trying to get my FAS2040 to action user lookups using LDAP, below is the filer configuration options: filer> options ldap ldap.ADdomain dc1.colour.domain.local ldap.base OU=Users,OU=something1,OU=something2,OU=darkside,DC=colour,DC=domain,DC=local ldap.base.group ldap.base.netgroup ldap.base.passwd ldap.enable on ldap.minimum_bind_level anonymous ldap.name domain-admin-account ldap.nssmap.attribute.gecos gecos ldap.nssmap.attribute.gidNumber gidNumber ldap.nssmap.attribute.groupname cn ldap.nssmap.attribute.homeDirectory homeDirectory ldap.nssmap.attribute.loginShell loginShell ldap.nssmap.attribute.memberNisNetgroup memberNisNetgroup ldap.nssmap.attribute.memberUid memberUid ldap.nssmap.attribute.netgroupname cn ldap.nssmap.attribute.nisNetgroupTriple nisNetgroupTriple ldap.nssmap.attribute.uid uid ldap.nssmap.attribute.uidNumber uidNumber ldap.nssmap.attribute.userPassword userPassword ldap.nssmap.objectClass.nisNetgroup nisNetgroup ldap.nssmap.objectClass.posixAccount posixAccount ldap.nssmap.objectClass.posixGroup posixGroup ldap.passwd ****** ldap.port 389 ldap.servers ldap.servers.preferred ldap.ssl.enable off ldap.timeout 20 ldap.usermap.attribute.unixaccount unixaccount ldap.usermap.attribute.windowsaccount sAMAccountName ldap.usermap.base ldap.usermap.enable on output of nsswitch.conf: hosts: files dns passwd: ldap files netgroup: ldap files group: ldap files shadow: files nis Error Message(s): [filer: auth.ldap.trace.LDAPConnection.statusMsg:info]: AUTH: TraceLDAPServer- Starting AD LDAP server address discovery for dc1.colour.domain.LOCAL. [filer: auth.ldap.trace.LDAPConnection.statusMsg:info]: AUTH: TraceLDAPServer- Found no AD LDAP server addresses using DNS site query (site). [filer: auth.ldap.trace.LDAPConnection.statusMsg:info]: AUTH: TraceLDAPServer- Found no AD LDAP server addresses using generic DNS query. Could not get passwd entry for name = <random user> the filer can ping the FQDN of dc1 the filer can ping the IP of dc1 the filer cannot ping "dc1" I'm not sure where I'm going wrong, so any pointers would be great.

    Read the article

  • QoS for Cisco Router to Prioritize Voice and Interactive Traffic

    - by TJ Huffington
    I have a Cisco 891W NATing Voice and Data to the internet over a 10mbit/2mbit connection. Voice traffic gets degraded when I upload large files. Pings time out as well. I tried to configure a QoS policy but it's basically not doing anything. Voice traffic still degrades when upload bandwidth gets saturated. Here is my current configruation: class-map match-any QoS-Transactional match protocol ssh match protocol xwindows class-map match-any QoS-Voice match protocol rtp audio class-map match-any QoS-Bulk match protocol secure-nntp match protocol smtp match protocol tftp match protocol ftp class-map match-any QoS-Management match protocol snmp match protocol dns match protocol secure-imap class-map match-any QoS-Inter-Video match protocol rtp video class-map match-any QoS-Voice-Control match access-group name Voice-Control policy-map QoS-Priority-Output class QoS-Voice priority percent 25 set dscp ef class QoS-Inter-Video bandwidth remaining percent 10 set dscp af41 class QoS-Transactional bandwidth remaining percent 25 random-detect dscp-based set dscp af21 class QoS-Bulk bandwidth remaining percent 5 random-detect dscp-based set dscp af11 class QoS-Management bandwidth remaining percent 1 set dscp cs2 class QoS-Voice-Control priority percent 5 set dscp ef class class-default fair-queue interface FastEthernet8 bandwidth 1024 bandwidth receive 20480 ip address dhcp ip nat outside ip virtual-reassembly duplex auto speed auto auto discovery qos crypto map mymap max-reserved-bandwidth 80 service-policy output QoS-Priority-Output crypto map mymap 10 ipsec-isakmp set peer 1.2.3.4 default set transform-set ESP-3DES-SHA match address 110 qos pre-classify ! fa8 is my connection to the internet. Voice traffic goes over a VPN ("mymap") to the SIP server. That's why I specified "qos pre-classify" which I believe is the way to classify traffic over the VPN. However even when I ping a public IP while saturating upload bandwidth, the latency is exceptionally high. Is this configuration correct? Are there any suggestions that might make this work for my setup? Thanks in advance.

    Read the article

  • QoS for Cisco Router to Prioritize Voice and Interactive Traffic

    - by TJ Huffington
    I have a Cisco 891W NATing Voice and Data to the internet over a 10mbit/2mbit connection. Voice traffic gets degraded when I upload large files. Pings time out as well. I tried to configure a QoS policy but it's basically not doing anything. Voice traffic still degrades when upload bandwidth gets saturated. Here is my current configruation: class-map match-any QoS-Transactional match protocol ssh match protocol xwindows class-map match-any QoS-Voice match protocol rtp audio class-map match-any QoS-Bulk match protocol secure-nntp match protocol smtp match protocol tftp match protocol ftp class-map match-any QoS-Management match protocol snmp match protocol dns match protocol secure-imap class-map match-any QoS-Inter-Video match protocol rtp video class-map match-any QoS-Voice-Control match access-group name Voice-Control policy-map QoS-Priority-Output class QoS-Voice priority percent 25 set dscp ef class QoS-Inter-Video bandwidth remaining percent 10 set dscp af41 class QoS-Transactional bandwidth remaining percent 25 random-detect dscp-based set dscp af21 class QoS-Bulk bandwidth remaining percent 5 random-detect dscp-based set dscp af11 class QoS-Management bandwidth remaining percent 1 set dscp cs2 class QoS-Voice-Control priority percent 5 set dscp ef class class-default fair-queue interface FastEthernet8 bandwidth 1024 bandwidth receive 20480 ip address dhcp ip nat outside ip virtual-reassembly duplex auto speed auto auto discovery qos crypto map mymap max-reserved-bandwidth 80 service-policy output QoS-Priority-Output crypto map mymap 10 ipsec-isakmp set peer 1.2.3.4 default set transform-set ESP-3DES-SHA match address 110 qos pre-classify ! fa8 is my connection to the internet. Voice traffic goes over a VPN ("mymap") to the SIP server. That's why I specified "qos pre-classify" which I believe is the way to classify traffic over the VPN. However even when I ping a public IP while saturating upload bandwidth, the latency is exceptionally high. Is this configuration correct? Are there any suggestions that might make this work for my setup? Thanks in advance.

    Read the article

  • How do I renew an expired Ubuntu OpenLDAP SSL Certificate

    - by Doug Symes
    We went through the steps of revoking an SSL Certificate used by our OpenLDAP server and renewing it but we are unable to start slapd. Here are the commands we used: openssl verify hostname_domain_com_cert.pem We got back that the certificate was expired but "OK" We revoked the certificate we'd been using: openssl ca -revoke /etc/ssl/certs/hostname_domain_com_cert.pem Revoking worked fine. We created the new Cert Request by passing it the key file as input: openssl req -new -key hostname_domain_com_key.pem -out newreq.pem We generated a new certificate using the newly created request file "newreq.pem" openssl ca -policy policy_anything -out newcert.pem -infiles newreq.pem We looked at our cn=config.ldif file and found the locations for the key and cert and placed the newly dated certificate in the needed path. Still we are unable to start slapd with: service slapd start We get this message: Starting OpenLDAP: slapd - failed. The operation failed but no output was produced. For hints on what went wrong please refer to the system's logfiles (e.g. /var/log/syslog) or try running the daemon in Debug mode like via "slapd -d 16383" (warning: this will create copious output). Below, you can find the command line options used by this script to run slapd. Do not forget to specify those options if you want to look to debugging output: slapd -h 'ldap:/// ldapi:/// ldaps:///' -g openldap -u openldap -F /etc/ldap/slapd.d/ Here is what we found in /var/log/syslog Oct 23 20:18:25 ldap1 slapd[2710]: @(#) $OpenLDAP: slapd 2.4.21 (Dec 19 2011 15:40:04) $#012#011buildd@allspice:/build/buildd/openldap-2.4.21/debian/build/servers/slapd Oct 23 20:18:25 ldap1 slapd[2710]: main: TLS init def ctx failed: -1 Oct 23 20:18:25 ldap1 slapd[2710]: slapd stopped. Oct 23 20:18:25 ldap1 slapd[2710]: connections_destroy: nothing to destroy. We are not sure what else to try. Any ideas?

    Read the article

  • How can I forward an application with X11 in grayscale

    - by ??????? ???????????
    I am trying to run a graphical application at home and display it on a it on a laptop which is located about six routing hops away. The problem is that the connection is so slow (or rather there is so much GOOEY being transfered) that the mouse is unresponsive and it takes a "long time" to redraw the window even at a resolution of 800x600 pixels. The connection speeds are 10MBit up at home and about 1MBit down on the laptop, which I think should be sufficient for looking at some GUI in (almost) real time. Since this traffic is sent over over a secure shell, I have enabled Compression with highest CompressionLevel along with Ciphers set to blowfish-cbc. This has substantially improved the responsiveness of the application, making it nearly usable. However, my goal is to improve the performance even further by sacrificing colors and even frame rate. The application to be displayed a Qemu SDL window with a graphically-oriented OS in it. This is not strictly relevant, but perhaps there are options to tweak the SDL output which I am not aware of. A possible workaround would be to run the application in a "hidden" X server and enabling TigerVNC on that X server. This would automatically give me the benefits of an optimized VNC viewport, but the goal is to do without (reduce complexity). The question I'm asking is what are my options for reducing the data-rate generated on the server in order to make the graphical application more usable on the client. As mentioned, colors are not important and I could probably work with 5-16 fps. Both machines are running Gentoo with the software in question being: workstation X.Org X Server 1.10.4 OpenSSH_5.8p1-hpn13v10, OpenSSL 1.0.0e QEMU emulator version 0.15.1 (qemu-kvm-0.15.1) laptop X.Org X Server 1.12.2 OpenSSH_5.8p1-hpn13v10lpk, OpenSSL 1.0.0j

    Read the article

  • Personal VPN Solutions

    - by dragonmantank
    I want to set up a VPN for my laptop to connect back at home so that I don't have to directly expose my desktop computer to the internet. Here is what I have: Internet -> DD-WRT v24sp1-mega -> Desktop PC w/ Windows 7 Ultimate -> MacBook w/ OSX 10.6 What would be the easiest thing to do? DD-WRT has PPTP and OpenVPN built in and Windows 7 has RRAS itself but thus far I've run into some problems. Are there any other alternatives, or suggestions on getting these to work? PPTP I tried setting up PPTP directly on DD-WRT using these directions. When I tried connecting using my external IP from the MacBook I just kept getting that the remote server did not respond. OpenVPN According to the instructions here I don't have enough open nvram to set up OpenVPN. RRAS I got RRAS set up without a problem and can connect from the MacBook to the Windows 7 box while I'm on the same network. I port forwarded 1723 on the DD-WRT back to the Windows 7 box and made sure that PPTP Passthrough was enabled. Again, like PPTP, it just kept timing out.

    Read the article

  • vhost.conf file in PLESK not working as intended

    - by Saif Bechan
    I have configured a vhost file for my domain but it does not seem to work. These are the steps I took, please correct me if I am wrong. First I made a file called vhost.conf in: /var/www/vhosts/*domain*/conf/vhost.conf The content of the vhost file looks like this: <Directory /var/www/vhosts/*domain*/httpdocs> php_admin_flag engine on php_admin_flag display_errors on </Directory> Now in my /etc/php.ini i set display_errors=Off After everything i rebuild with: /usr/local/psa/admin/sbin/websrvmng -a But I don't see the any errors in my page. When i turn on the display_errors in /etc/php.ini only then can I see the errors. I know for a fact that the vhost file is read, because when i type nonsense values i get an error when restarting apache saying there are errors in the vhost file. Anyone know what the problem can be. Should there be special settings in either the php.ini file or the httpd.conf file. The httpd.conf i edit is in /etc/httpd/conf/httpd.conf. Is this the file that PLESK uses or is there another, because the values i see there do not really reflect the http folders of my domain. The httpd file looks like this now. # The document root DocumentRoot "/var/www/html" # i guess this is the base directory <Directory /> Order Deny,Allow Deny from all Options None AllowOverride None </Directory> # And i guess here are all my domains located, but there aren't any here <Directory "/var/www/html"> Options None AllowOverride None Order allow,deny Allow from all </Directory> Only this directory /var/www/html is not used by me, I use the directory /var/www/vhosts. The only folder found in /var/www/html is a folder called awstats. Does plesk use other files, and where are they located. I hope this all makes sense to anyone, and i hope i can find a solution

    Read the article

  • Postfix mail server: can't connect via POP/IMAP

    - by MelkerOVan
    I've followed this guide on setting up a mail server on my dedicated server. I've been able to send mails from the php application I'm using and the linux commandline (using telnet, php, etc). The problem is that I cannot connect to the server via IMAP/POP which I've setup using Courier. I've tried using thunderbird but it complains that the username or password is wrong. I doubt it is the username/password but I don't know how to trouble shoot this. Edit: Here's the messages in mail.log: Jan 9 22:43:38 mail authdaemond: received auth request, service=imap, authtype=login Jan 9 22:43:38 mail authdaemond: authmysql: trying this module Jan 9 22:43:38 mail authdaemond: SQL query: SELECT id, crypt, "", uid, gid, home, "", "", name, "" FROM users WHERE id = '[email protected]' AND (enabled=1) Jan 9 22:43:38 mail authdaemond: password matches successfully Jan 9 22:43:38 mail authdaemond: authmysql: sysusername=<null>, sysuserid=5000, sysgroupid=5000, homedir=/var/spool/mail/virtual, [email protected], fullname=peter, maildir=<null>, quota=<null>, options=<null> Jan 9 22:43:38 mail authdaemond: authmysql: clearpasswd=<null>, passwd=6SrBcYq65l8QU Jan 9 22:43:38 mail authdaemond: Authenticated: sysusername=<null>, sysuserid=5000, sysgroupid=5000, homedir=/var/spool/mail/virtual, [email protected], fullname=peter, maildir=<null>, quota=<null>, options=<null> Jan 9 22:43:38 mail authdaemond: Authenticated: clearpasswd=peter, passwd=6SrBcYq65l8QU Jan 9 22:43:38 mail imapd: chdir Maildir: No such file or directory

    Read the article

  • How to securely enable file sharing over PPTP on Windows 2008 Server

    - by Damage
    I have set up a Windows SBS 2003 domain (LAN) and a stand-alone Windows 2008 Server (web server) at another location (workgroup). I established PPTP VPN connection (SBS dials web server) over which users from LAN should be able to access web server. On web server I enabled TCP/IPv4 and File and Printer sharing protocol. It has a few external addresses (one of them is default) AND one local address (192.x.x.x) assigned to network adapter. Firewall allows port 445 for file sharing. There's the problem - I can not enable web server file shares to be visible to LAN users and ONLY to LAN users: From SBS I can access webserver but I cannot access webserver from LAN workstations (XP, Vista). I have had same configuration - I have just replaced old (web server) Windows 2003 server with 2008 so SBS settings are the same (static route, DNS etc.). How can I enable file sharing on web server for LAN workstations? Now I have opened File and printer sharing to the internet which is of course totaly unsecure. I tried to secure the tunnel so I moved RAS (VPN) connection (Network Center) on web server to "Private" profile and moved firewall port 445 to "Private" profile but suddenly file sharing does not work and I cannot telnet webserver on port 445. How can I secure file sharing so I do not have to open it to the internet?

    Read the article

  • Implement QoS/Bandwidth Management or Upgrade Bandwidth?

    - by Michael
    A question that I'm faced with currently. Here's my setup: Cisco ASA 5510 15Mbps Internet Connection @ $1350/month The bandwidth was originally meant for 35-45 people but we've grown quite quickly to roughly 60-65 people. Needless to say, when I check bandwidth logs it's almost always spiked at 15Mbps. I did use Wireshark to do some poking around to see what was hogging up our bandwidth but with everything running through CDNs and Cloud Services it proved difficult to get a good grasp of where our bandwidth was going. So the question is do I ONLY implement bandwidth management through ASA OR upgrade the Internet to 50Mbps ($1600/month) and then implement bandwidth management through ASA? Any suggestions on how to segment the 15Mbps connection if we decided ONLY to go with the bandwidth management solution? Thanks. UPDATE 1 Installed PRTG and used packet content to monitor the traffic. As I suspected still pretty vague. My Top Connections include the following: a204-2-160-16.deploy.akamaitechnologies.com ec2-50-16-212-159.compute-1.amazonaws.com a204-2-160-48.deploy.akamaitechnologies.com a72-247-247-133.deploy.akamaitechnologies.com mediaserver-sv5-t1-1.pandora.com Other than the Pandora destination, the rest doesn't tell me much on how to properly control the bandwidth. Any thoughts or suggestions? Thanks. M

    Read the article

  • How do I use a Zyxel P660 router as just modem so that I can connect a WRT54GL router in cascade?

    - by Kenji Kina
    I have a Zyxel P660HW-t1 v2 router (which has a DSL port) and a WRT54GL router (which does not) and the exact same situation as in this thread (UPDATE: the connection between both devices is the important part, since I have been able to set the zyxel router to act as bridge by itself quite nicely. I have accessed my internet connection directly through a PC using PPPoE without any problems, the issues arise when I try to connect the WRT54GL router between the zyxel "modem" and my PCs). I've been trying to use my Zyxel P660 as a modem only: Setup P660 to bridge mode. Changed WRT54GL's IP address to 192.168.2.1 to avoid a conflict on the network. Configured the PPPoE settings as required on WRT54GL. The thing is that when I connect the Zyxel modem/router on the WRT54GL's internet port the light doesn't turn on. I can confirm that this port has been working ok, so I'm not really sure what's going between the devices. I checked several settings such as IPs, tried disabling DHCP on Zyxel/Linksys, Firewall on both and still nothing. Also, I tried connecting Zyxel directly to a computer in bridge mode and dialed successfully. I have even posted a question here before, thinking that what I asked there was the only thing I needed to get things done. Unfortunately it wasn't, and the guy that solved his issue didn't give enough details in his post (and is quite unlikely to give more details since he was an anonymous user). For one, I don't know how to do this part: connected to the Zyxel through telnet and forced LAN port 1 to be at 100mb as well I can't find the option that does this on the zyxel router. Not through telnet or the web admin. Can anyone help me solve this?

    Read the article

  • How to auto-mount encfs volume on login in ubuntu 9.10

    - by xzenox
    Hi, Previously, in 9.04, I was using pam mount in conjunction with encfs to mount an encrypted volume at login. This worked perfectly and since the password was the same as my user password, none was entered besides the initial login one. Now in 9.10, using the same setup and the same volume line in pam's config file, the volume will not mount. The folder does not even get created for the mount point. I am thinking this might be caused by the fact that I now switched to using an encrypted /home directory (previously left unencrypted on 9.04). To encrypt it, i used the standard /home encrypt setup from the 9.10 fresh install. I am thinking that perhaps, pam tries to mount the volume before /home is mounted and fails. Is there a log file I could look into/post here? Note that mounting manually works fine using the same paths, writing full paths does not help, nor is removing the options attribute. Here's my volume entry: <volume user="nicholas" fstype="fuse" path="encfs#~/.dropbox_dir/Dropbox/encrypted" mountpoint="~/Dropbox" options="nonempty" />

    Read the article

  • Destination host unreachable - Windows Server 2008

    - by Doug
    Hi There, I'm working with a windows 2008 domain controller, which I'm having issues connecting to internet resources. A small bit of background, this is a 2008 domain controller that has been added into an existing Win 2k domain, with a goal of replacing the older computers. Both of the older controllers can still access internet resources, and so can all the clients. When I ping Google.ca from the new server, it does resolve to an ip address, but then says "Reply from 192.168.123.20: Destination host unreachable." I'm really at a lost now, I've checked and rechecked my ip configuration, the default gateway is my router, the primary DNS server is the my DC, and the secondary DNS is also my router. The DNS server on the domain has a forwarder added for the router as well. Everything on my local network works just fine, all my internal resources can be resolved. For the time being, I've stopped the Firewall service. I'm not 100% used to Server 2008 yet, but it might be a case of just missing something simple. Thanks for your time.

    Read the article

  • mercurial hgwebdir error with basicauth in apache2

    - by Dio
    Hello, I'm having kind of a strange error that I'm trying to track down. I was trying to setup mercurial on my home server this weekend. I seem to have it running up to the point where I'm trying to get repositories published correctly. I'm running Ubuntu 10.04 LTS Mercurial Distributed SCM (version 1.4.3) I followed the hgwebdir guide: http://mercurial.selenic.com/wiki/HgWebDirStepByStep and everything seems to work great, I can pull and push my local repositories. Then I tried to add basic auth changing ScriptAliasMatch ^/hg(.*) /var/hg/hgwebdir.cgi$1 <Directory "/var/hg"> Options ExecCGI FollowSymLinks AllowOverride None </Directory> to ScriptAliasMatch ^/hg(.*) /var/hg/hgwebdir.cgi$1 <Directory "/var/hg"> Options ExecCGI FollowSymLinks AllowOverride None AuthType Basic AuthName hgwebdir AuthUserFile /usr/local/etc/httpd/users Require valid-user </Directory> This works exactly as I'd expect it to when I navigate to the directory via my web browser, but when I hg push get a long section repeating of File "/usr/lib/python2.6/urllib2.py", line 369, in _call_chain result = func(*args) File "/usr/lib/python2.6/urllib2.py", line 855, in http_error_401 url, req, headers) File "/usr/lib/python2.6/urllib2.py", line 833, in http_error_auth_reqed return self.retry_http_basic_auth(host, req, realm) File "/usr/lib/python2.6/urllib2.py", line 843, in retry_http_basic_auth return self.parent.open(req, timeout=req.timeout) followed by File "/usr/lib/pymodules/python2.6/mercurial/keepalive.py", line 249, in do_open self._start_transaction(h, req) File "/usr/lib/pymodules/python2.6/mercurial/url.py", line 419, in _start_transaction return keepalive.HTTPHandler._start_transaction(self, h, req) File "/usr/lib/pymodules/python2.6/mercurial/keepalive.py", line 342, in _start_transaction h.endheaders() File "/usr/lib/python2.6/httplib.py", line 904, in endheaders self._send_output() File "/usr/lib/python2.6/httplib.py", line 776, in _send_output self.send(msg) File "/usr/lib/pymodules/python2.6/mercurial/url.py", line 247, in _sendfile connection.send(self, data) File "/usr/lib/pymodules/python2.6/mercurial/keepalive.py", line 519, in safesend self.connect() File "/usr/lib/pymodules/python2.6/mercurial/url.py", line 273, in connect keepalive.HTTPConnection.connect(self) RuntimeError: maximum recursion depth exceeded while calling a Python object I'm a bit at a loss on this one. I'm really not sure why adding the authorization seems to work fine via my web browser but throw these errors from hg. Any help would be greatly appreciated.

    Read the article

  • Which httpd.conf and php.ini files does plesk use

    - by Saif Bechan
    If i disable the include_path in /etc/php.ini, i can still see that there is an include path loaded from somewhere. I want to know where this file is. If i use phpinfo(); on my domain i get that there is a include path /usr/share/pear:/usr/share/php, even though in the php.ini i used: ;inlucde_path=".:" In the section for aditional php.ini files this is the list: /etc/php.d/curl.ini, /etc/php.d/dbase.ini, /etc/php.d/dom.ini, /etc/php.d/gd.ini, /etc/php.d/imap.ini, /etc/php.d/json.ini, /etc/php.d/mbstring.ini, /etc/php.d/mysql.ini, /etc/php.d/mysqli.ini, /etc/php.d/pdo.ini, /etc/php.d/pdo_mysql.ini, /etc/php.d/pdo_sqlite.ini, /etc/php.d/wddx.ini, /etc/php.d/xmlreader.ini, /etc/php.d/xmlwriter.ini, /etc/php.d/xsl.ini, /etc/php.d/zip.ini I have checked all these files but i can nowhere find a reference to pear. This said the /etc/httpd/conf/httpd.conf file is questioning to me too. If i check this file i can see the following values are defined. DocumentRoot "/var/www/html" <Directory /> Order Deny,Allow Deny from all Options None AllowOverride None </Directory> <Directory "/var/www/html"> Options None AllowOverride None Order allow,deny Allow from all </Directory> The strange thing is that i don't even use this directory, so where does plesk get his httpd.conf file from. I want to check if everything is ok, because my vhost.conf is not working. I don't know if i should change these values or not, and where i can find the values plesk uses. i hope someone can help me with this.

    Read the article

  • Self-hosting vs. Budget hosting - What are the economics?

    - by cdonner
    My current hosting provider (shared Linux, unlimited domains, < $10 per month, with about 20 sites) has been giving me a lot of grief lately. I am contemplating to just ditch them and repurpose the old Sun V20z that is sitting in my basement rack, and move the hosting in-house, literally. My math goes as follows: my company pays up to $80 a months for my home internet service, which would cover the upgrade from currently Fios to Comcast business internet with 5 static IPs. So this comes free. running the server will cost me about $180/year at the current rate of approx. $.2/kWh my time is free So, it seems that the my net cost of doing this would be about $80 anually, plus the work that goes into setup and maintenance. I will have to get email hosting somewhere, which I do not want to do myself. On the other side of the balance sheet, I'd likely get better uptime than my provider based on recent stats, will not get suspended and don't have to spend hours with customer support. Overall, I am not convinced. Has anybody actually done that? What was your experience, and did it pay off?

    Read the article

  • Migrating Windows XP BOOT.INI Settings to Windows 7 Boot-loader

    - by Synetech inc.
    Two months ago my motherboard died, so I bought a used computer that came with Windows 7. I have since installed my old hard-drive, which had Windows XP on it, in this system. What I am trying to do now is to figure out a way to migrate the settings from XP's BOOT.INI into 7's boot-loader. Below is the BOOT.INI I used in XP (I have reduced the strings and updated the disks to point to the new location of the old HD. Oh and I am not clear on the drive letters. In XP, I could boot the recovery console or MS-DOS from a file in C:\ that contains the boot-sector. I am not sure what drive letter it would be called now—I had to manually change all the drive letters of the old partitions in Windows 7 because it auto-assigned them all wrong/differently). [boot loader] timeout=10 default=multi(0)disk(0)rdisk(1)partition(1)\WINDOWS [operating systems] multi(0)disk(0)rdisk(1)partition(1)\WINDOWS="XP" /fastdetect multi(0)disk(0)rdisk(1)partition(1)\WINDOWS="XP (Safe)" /safeboot:network /sos /bootlog /noguiboot C:\CMDCONS\BOOTSECT.DAT="Recovery Console" /cmdcons C:\BOOTSECT.DOS="MS-DOS 7.10" /win95 I have looked around, and have only been able to find some bcdedit commands to add XP to the boot-loader, but none that include information on setting safe-mode for it (or changing any of the XP load options for that matter). Not surprisingly I suppose, I have not found anything on adding the XP recovery console or DOS to the Windows 7 boot-loader. (Yes, I tried EasyBCD, but that did not help; it had no options for XP, and the best I managed was to get a choice of booting 7 or normal-mode XP—choosing XP didn't even give the old XP boot menu.) Can anyone please tell me how to export the entries in XP's boot.ini to 7's boot-loader so that on boot, I can choose to load the following: Windows 7 Windows 7 (Safe-mode) (Windows 7 (The Win7 counterpart of the Recovery Console)) Windows XP Windows XP (Safe-mode) Windows XP (Recovery Console) MS-DOS 7.10

    Read the article

  • Windows 7 install detects SSD but doesn't list it to install to

    - by Mohamed Meligy
    I'm having quite a weird problem when trying to install Windows 7 SP1 on a new Corsair Force Series 3 SSD to replace a failing HDD in my wife's laptop. When I boot to Windows install, it shows that I have no disks to install to, and tells me to find it a driver to any custom disks I may have. When I go to repair option on the first install window, and then open command prompt Window, I can see the disk using diskpart, and can partition it and format partitions, and then later access them from command prompt and copy files to them. After creating partitions, clicking the "browse" button in Windows install screen that shows no disks available to install Windows to, does show the partitions created by diskpart! So, it does detect the disk and partitions, but refuses to list them as options to install to. People on the Interwebs seem to suggest that just running diskpart "clean" solved the issue for most people, just creating an "active" "primary" partition is al most tutorials suggest. Both got me only as far as described above. The BIOS doesn't have RAID option, changing between "ATA" and "AHCI" (the only available options) didn't make any difference. Might be worth mentioning that this is on a laptop that has Sata III controller for main drive (which I connected the Sata3 SSD to), and Sata II for DVD (which I used for Windows install media). That's what googling brings at least (DELL XPS 15 L502). Any ideas? . Update: The SSD is 460 GB. I tried setting it all as one partition and creating 70-90 GB partition as well (NTFS). More importantly, Windows doesn't list the partition as one it cannot install to (which it does with disks in general when they are small for example). What happens here is different. It doesn't list anything at all. It shows empty list of drives.

    Read the article

  • Windows Server 2008 DHCP with RRAS

    - by Guillermo Prandi
    I have a Windows Server 2008 R2 which is a member of a domain, but is placed in a remote location. The server is directly connected to Internet. Clients need to access a particular insecure TCP service in this server (ports 9730 and 9731). Since clients have dynamic IP addresses I cannot know in advance, I thought it would be nice to have them connected through a VPN in order to access the insecure service, but ONLY to access that service, like this: Client ------> VPN TUNNEL ------> (Insecure service at Server) | \----> (Normal internet access) I'd enable the insecure ports in the firewall only from VPN accesses. For this I configured RRAS in the server and gave it a static IP address range (172.19.1.2 through 172.19.1.254) to serve the clients. First I thought I could use DHCP to assign the addresses, but I cannot use DHCP in my LAN connection (not allowed by the hosting service). I tried configuring DHCP binding it to a Microsoft Loopback Adapter, but that's not supported as a DHCP source by RRAS. What I want to accomplish is to send specific DHCP options to the client (network mask, routing table, etc.). In particular: Prevent the client from having the server as default router (without changing the client's "use default gateway in remote network"). Have it as a route for the server's internal RRAS address only (172.19.1.1). Prevent the client from using a 255.255.0.0 mask for the 172.19.x.x network (a 255.255.255.0 mask would be better). Can I do that with RRAS only? How? Currently, the only solution I can think of is to use DHCP in the LAN adapter, but filter DHCP packets so they don't reach the provider's network. However, I'm not sure if that will work. Any suggestions are welcomed! Guille

    Read the article

  • Server and Network Lag

    - by DanSpd
    At my home I have a server and my computer. Server has Windows Server 2008 Standart 64 bit installed and then my computer has Windows 7 64 bit installed. My home router is DIR-615 My server has a game server installed on it and basically total open connections on server are around 700. Once its around 700 server and then whole home network lags really badly. My internet connection is good and only around 600kb/s is being used out of 2mb/s (real download/upload speeds). So far I assume that my router has a connection limit and with server + my computer connections it peaks at around 1k and lags everything. Another assumption server lag comes from connection limit. On the internet I have read that standart version of server has connection limit of 700 + 10 reserved. I do not rmember where I found that information but it was on microsoft website. So I have two options. First is to upgrade my router to Netgear FVS318G-100 and second is to change connections limit on server. Any advices? Thank you

    Read the article

< Previous Page | 589 590 591 592 593 594 595 596 597 598 599 600  | Next Page >