Search Results

Search found 30235 results on 1210 pages for 'google video'.

Page 594/1210 | < Previous Page | 590 591 592 593 594 595 596 597 598 599 600 601  | Next Page >

  • Windows 7 - sharing file - slow seek time?

    - by progtick
    I do not want to copy the files. I simply have video files (.flv) on one computer and I would like another computer user to watch them without copying. Playback is fine, but seek time (as in if you move the cursor to skip some portion of the video) takes forever! I thought wireless speed might be the culprit, so I wired the two computer. Maybe I saw some improvement but still so bad. It's 1 Gbps! (I know real speed will vary, but before I monitor real speed and such, do I have reasonable issue? Or am I bound to have very slow seek time?) What is going on? I must mention some of these files are huge!

    Read the article

  • How can I make my monitor run at it's native resolution under Kubuntu 9.10?

    - by Adam Matan
    Hi, I have installed Kubuntu 9.10 afresh on an HP desktop computer with a Samsung SyncMaster 2243 and Intel integrated graphics card. The screen resolution is fixed on 1280x1024 instead of the native 1680x1050, which makes my eyes bleed. $ lspci -k |grep "VGA" -A2 00:02.0 VGA compatible controller: Intel Corporation 82G33/G31 Express Integrated Graphics Controller (rev 10) Kernel driver in use: i915 Kernel modules: i915 and my xorg.conf: /etc/X11$ cat xorg.conf Section "Device" Identifier "Configured Video Device" Driver "vesa" EndSection Section "Monitor" Identifier "Configured Monitor" EndSection Section "Screen" Identifier "Default Screen" Monitor "Configured Monitor" Device "Configured Video Device" EndSection Any ideas how to make this driver work? I found no working solutions on Google searches. Thanks, Adam

    Read the article

  • VLC opening direct 3d output windows

    - by FrozenKing
    As you can in this above image there are two windows of vlc player, I just want to get rid of the other vlc direct3d output window. VLC version is latest i.e. 2.0.1. If I change the video output to some other also; this thing doesn't change. Only the title changes i.e. now it is direct3d output then it will change to openGL or as per the selected output video option. This happens when I play *.mov files.

    Read the article

  • Arch linux ati graphics crash after grub install

    - by Jay
    Ok, so I've had an arch linux w/ gnome 3 installed for a while now. And a while ago I installed ubuntu as another partition, I think to fix an issue that cause arch to fail. So, it was all working fine, but then I went and reinstalled grub 1 on the arch partition; Ubuntu had overwritten it on the install. Then when I tried to boot into arch it booted, but the graphics wasn't working correctly: gdm wouldn't even show, and there were weird colors instead. So, I uninstalled xf86-video-ati and then installed xf86-video-vesa. That made gdm run in fallback mode and I was able to boot to gnome 3 fallback mode (or whatever it's called). But I can't seem to get the graphics working correctly.

    Read the article

  • How to create dynamic Scatter Plot/Matrix with labels and categories on both axis in Excel 2010?

    - by user1581900
    Let us consider a following data set: Name | Age | Hair Color ----------------------------- John | Young | Brown Sophie | Old | Blond Adam | Mature| Blond Mark | Teen | Dark Jeremy | Old | Grey Alex | Young | Brown etc... Both Age and Hair Color, can take only defined values(Young/teen/mature/old and Blond/brown/Dark/Grey). Name is the only real variable here. I want to create a Scatter Plot / Matrix that will look something like that: I know that I schould use this tool to add labels to the scatter plot. I also found this youtube video that explains how to display categories on Y-axis Moreover I need the chart to be dynamic as explained in another youtube video. How do I combine all these approaches to get a Scatter Plot with categories as values on both axis?

    Read the article

  • Share Exchange Calendar Outside Organization

    - by CalCurious
    I'm trying to figure out the best way to meet a user's (Corp-A-User) request to share their calendar with someone at another company (Corp-B-User). We're running Microsoft SBS 2008 with Exchange 2007 and SharePoint. The remote user is running Exchange, version unknown. Corp-A-User wants to give the Corp-B-User the ability to create appointments on Corp-A-User's calendar. This will naturally require sharing of Free/Busy information. Corp-A-User naturally lacks the vision to seen ANY problem with giving Corp-B-User full access to their calendar. But, I see the problems with that and would prefer that Corp-B-User have only the ability to see Free/Busy and create appointments. Most of the external publishing options that I have thought of, such as WebDav, allow displaying a user's calendar, but there are problems with security and the ability to create appointments. Right now, I'm thinking the cleanest solution would be to use a Google calendar along with Google Calendar Sync for the two user's Outlook clients. But, I'm not sure if there isn't a better way and I hate teh idea of pushing a corporate calendar up to Google. Not to mention the issues likely to pop up from the multiple sync paths. Does any one have a good solution for this scenario that would be willing to share what they use?

    Read the article

  • How to add/remove codecs in linux

    - by agg
    Friends, I'm new to Linux, I need to work on Linux. I have ported Linux to AT91SAM9261-EK board. Now i need to work on Codecs. I just know the definition of codec from wikipedia, Now i need add my own codec to the board. I want to know, Where codec will be preset in 1)File System, 2)Kernel or 3)Player And how to add codec while building entire source, please tell me the steps i need follow. And also how to remove the codec. How to play the video files from pendrive in console, now i can play audio by command 'mplayer "filename" '. Don't know how to play video. Please help me, How to do this. Regards AGG

    Read the article

  • Change Linux Console's Default Monitor

    - by Tim M
    Is there any way to specify which monitor the console is displayed on in Linux? Details: I have a 3 monitor setup with 2 video cards. When I boot the computer, the BIOS displays on the PCI graphics card (which has a small monitor). When starting Linux, the console is displayed on the same monitor. Is there a way to have the console output on a different monitor? I'm using the vesafb framebuffer. I don't see a way in my BIOS to change the default video card.

    Read the article

  • How to generate a 8 bit per sample wav audio file in VLC

    - by Ahmed safan
    I'm using the following vlc command line to extract first 5 minutes of audio from video file "-I dummy -vvv --no-sout-video --sout-audio --no-sout-rtp-sap --no-sout-standard-sap --ttl=1 --sout-transcode-threads=5 --sout-transcode-high-priority --sout-keep --sout #transcode{acodec=s16l,channels=1,samplerate=8000,ab=64}:std{mux=wav,access=file,dst="c:\dest.wav"} "c:\originalvideo.mpg" --start-time=0 --stop-time=300 vlc://quit"; if ab=64 =64 k bits per second and samples per second=8 k samples then bits per sample=64/8=8 bits per sample but the problem is that the output file always has samples of 16 bits per sample. I know that sample can contain bits from 8 , 16, 24 to 32 bits per sample. i want to get 8 bits per sample file how can this be done ?

    Read the article

  • DKIM- Filter No Signature Data

    - by Vineet Sharma
    I have installed DKIM-Filter on Postfix after reading this tutorial http://www.unibia.com/unibianet/systems-networking/how-setup-domainkeys-identified-mail-dkim-postfix-and-ubuntu-server My email now has a DKIM signature but still it is landing in the SPAM folder. Here is the header Received-SPF: neutral (google.com: 69.164.193.167 is neither permitted nor denied by best guess record for domain of [email protected]) client-ip=69.164.193.167; Authentication-Results: mx.google.com; spf=neutral (google.com: 69.164.193.167 is neither permitted nor denied by best guess record for domain of [email protected]) [email protected]; dkim=hardfail (test mode) [email protected] Received: from promote.a2labs.in (localhost [127.0.0.1]) by promote.a2labs.in (Postfix) with ESMTPA id 34858530E8 for <[email protected]>; Mon, 28 Feb 2011 12:23:07 +0530 (IST) DKIM-Signature: v=1; a=rsa-sha256; c=simple/simple; d=a2labs.in; s=mail; t=1298875987; bh=bo+H1VYPIHMja2u7i1lnzr4k/j4Pe8iSf79bVw94XpI=; h=To:Subject:Message-ID:Date:From:Reply-To:MIME-Version: Content-Type:Content-Transfer-Encoding; b=nhTdlnUwo0iUJ92ycQzKSRjw 5Pfya0DJcJrAc8Mr2hIv8OLpgzBCzdOMWTGqR5nuUmAzgCGYBhYAM2XZwVxo9JG/iz7 oYKysmNQnskFx0TRyW3UOkDWcfHcPnCL6Y7fGzZWinmsyjsg47k+mKZg/e8jqlwTAMO PYKkt5pBz7SM0= Also my mail.err file shows Feb 28 12:17:03 ivineet dkim-filter[32181]: 1F788530E1: no signature data Feb 28 12:18:02 ivineet dkim-filter[32181]: 432BA530E2: no signature data How to fix it

    Read the article

  • How to fix poor rendering in Windows Movie Maker?

    - by Cyberherbalist
    I am using CamStudio to make some instructional videos about Visual Studio for our development team, and one of the videos needed some editing to remove audio and video mistakes and to add in a better ending. CamStudio outputs to .avi files, and they look pretty good, with the program source code being quite readable. However, after making the edits using WMM, it has rendered the results to a noticeable loss in quality. It has gone from from fairly sharp in focus and adequately readable to recognizable but somewhat blurred. It has also inflated the size of the new .avi file to three times its original size (before cropping half of the vido out!). And the .wmv I attempted to render was was certainly smaller but simply horrible-looking. The left image here is the original video, and the right image is WMM's rendering in .avi format: I have to be doing something wrong, but I know nothing about how to use WMM (my first use of it). I am using default settings to the best of my knowledge. Any suggestions welcomed!

    Read the article

  • Sending email with exim and external sender address

    - by Tronic
    i have following problem: i want to send emails with an rails webapp. i set up an exim server and when looking into the logs, the sending works, but the emails aren't sent really. i had the same problem with another isp. the sender address is hosted on another mailserver, other isp. i think the problem is, that sending doesn't work because the sener address isn't hosted on the same server. do you have any advice on this? the logs (exim) tell me the following: 2011-01-01 14:38:06 1PZ1eo-0000Ga-38 <= <> R=1PZ1eo-0000GY-1p U=Debian-exim P=local S=1778 2011-01-01 14:38:08 1PZ1eo-0000Ga-38 => [email protected] R=dnslookup T=remote_smtp H=mx1.emailsrvr.com [98.129.184.131] X=TLS1.0:RSA_AES_256_CBC_SHA1:32 DN="C=US,O=mx1.emailsrvr.com,OU=GT21850092,OU=See www.geotrust.com/resources/cps (c)08,OU=Domain Control Validated - QuickSSL(R),CN=mx1.emailsrvr.com" 2011-01-01 14:38:08 1PZ1eo-0000Ga-38 Completed [email protected] is the external sender-address! thank you! Edit with more details when sending a mail from command line with echo "Test" | mail -s Testmail [email protected] the logs says 2011-01-01 20:45:24 1PZ7OG-0001Vp-Rx <= root@gustav U=root P=local S=360 2011-01-01 20:45:26 1PZ7OG-0001Vp-Rx => [email protected] R=dnslookup T=remote_smtp H=gmail-smtp-in.l.google.com [209.85.229.27] X=TLS1.0:RSA_ARCFOUR_MD5:16 DN="C=US,ST=California,L=Mountain View,O=Google Inc,CN=mx.google.com" 2011-01-01 20:45:26 1PZ7OG-0001Vp-Rx Completed and i get the mail on my gmail account. but when sending by webapp (when testing locally with sendmail it works fine) i only get this log output 2011-01-01 20:50:08 1PZ7Sq-0001X9-L4 <= <> R=1PZ7Sq-0001X7-Jo U=Debian-exim P=local S=1780 2011-01-01 20:50:11 1PZ7Sq-0001X9-L4 => [email protected] R=dnslookup T=remote_smtp H=mx1.emailsrvr.com [98.129.184.3] X=TLS1.0:RSA_AES_256_CBC_SHA1:32 DN="C=US,O=mx1.emailsrvr.com,OU=GT21850092,OU=See www.geotrust.com/resources/cps (c)08,OU=Domain Control Validated - QuickSSL(R),CN=mx1.emailsrvr.com" 2011-01-01 20:50:11 1PZ7Sq-0001X9-L4 Completed

    Read the article

  • WinXP Movie Maker Codec Error

    - by Bob Rivers
    I'm trying to use Windows XP Movie Maker, but when I try to import an AVI video, it shows an error telling me that it wasn't import due to an the fact that the codec wasn't available (I'm able to see the video using the windows media player) First, the error message suggested to enable the option "download codecs automatically" under "tools options general". I did it. But know the error tells me that the codec wasn't available and, if I already installed it, I should reinitialize movie maker. I also already did it... The error msg is: The file D:\movie1.avi cannot be imported because the codec required to play the file is not installed on your computer. If you have already tried to download and install the codec, close and restart Windows Movie Maker, and then try to import the file again. Any hints?

    Read the article

  • Radeon 4670 Card Has 2 DVI Outs But Only Works When One is used in Win7 x64

    - by ssmith
    I have an ATI XFX Radeon 4670 1GB video card in a Windows 7 Ultimate x64 setup. If I only use one monitor, all is well. If I plug in a second DVI cable to the card, both monitors go dark. I can get one or the other to display, but only when it is the only one plugged into the card. I'm really hoping for a dual-monitor setup here as that was the point of the card. I'm using ATI Radeon HD 4600 Series video drivers dated 11/24/09 (8.681.0.0) which are the latest from their site and are supposed to work with Vista or Win7 x64. When the computer boots with both displays connected, both monitors display the inital bios and boot screens. The Win7 splash screen also displays, but by the time it goes to the login screen, one monitor is offline.

    Read the article

  • How can I unlock a file without closing the file handle?

    - by netvope
    When I'm downloading a video file with Google Chrome, the file is locked and cannot be opened by media players. I want to be able to play the file while it's being downloaded. The video bitrate is lower than my Internet bandwidth so it wouldn't be a problem. Popular unlockers work by closing file handles, which would interrupt the download. How can I remove the read-lock without closing the file handle? Can I replace the read-lock with a write-lock?

    Read the article

  • What cable to connect Inspiron 1720 to HDMI TV?

    - by Bernhard Hofmann
    Hi I'm a little confused to say the least when it comes to video formats and protocols. I'd like to view my laptop output on my HD TV. The TV has HDMI, S-Video, and RCA inputs. My laptop has a VGA female port on the side for driving a 2nd monitor, and an S-VHS output at the back. No, it has no DVI, which I've heard is a poor decision from DELL, and even poorer decision on my part to buy it. Can I get true HD output from this to my TV? What cable do I need, or would I need a converter? Any other suggestions are also welcome, such as how to get something close to HD on my TV. Thanks! Bernhard

    Read the article

  • Need to hookup HP dv7-3085dx with Nvidia GeForce GT 230M to my Dell 30 inch LCD 3007WFP at max resol

    - by user14660
    I recently bought an HP laptop (dv7-3085dx) (http://reviews.cnet.com/laptops/hp-pavilion-dv7-3085dx/4505-3121_7-33776108.html) which is supposed to have a pretty good video card (NVIDIA GeForce GT 230M). The card is supposed to output a max resolution of 2560x1600 which is also the max resolution of my monitor (http://www.ubergizmo.com/15/archives/2006/02/dell_3007wfp_on_dell_2001fp_action_8_megapixel_desktop.html). Now I bought an HDMI to dual link dvi (http://www.amazon.com/gp/product/B002KKLYDK/ref=oss_product) cable...this is after Best Buy's 70 dollar hdmi to dvi (perhaps it was 'single' link?) didn't give me the best resolution. In windows 7, when I try to set the max resolution for my 30 in monitor, I only get 1280x800...which is absurd. The monitor is great, I love the laptop and the video card supposedly supports such resolutions. So I can't figure out why I'm not getting better resolution (by the way, when i "detect" my monitor in windows 7, it is shown correctly as DELL 3007WFP!).

    Read the article

  • IIS7 response size thresholds

    - by DanielM
    I have a customer who is attempting video playback via HTTP progressive download of very large files ( 1 GB). There is no problem once a file is cached at the edge via my CDN, but hits to my origin (first hits prior to edge-cache population) experience stalling and loss of sync between audio and video about an hour and a half into playback. This occurs pretty reliably at that point, suggesting that some threshold somehwere is getting hit. Are there IIS configuration knobs governing HTTP Response size? Other data points: I am unable to replicate this problem. I am looking at client bandwidth and last mile issues. I am looking at possible encoding recipe dependencies. But this problem never came up when we were using a "push" cache configuration (CDN-hosted origin), so something funky serverside at my origin seems like a likely culprit. Thanks ...

    Read the article

  • Hiding monitor from windows, working with it from my app only [closed]

    - by Mikhail
    I need to use a monitor as a "private" device for my special application, I want to use it as a flashlight of a sort and draw special patterns on it in full screen. I don't want this monitor to be recognized by OS (Windows 7) as a monitor. I.e. user should not be able to move mouse to that monitor, or change its resolution, or run screensaver on it or whatever. But I want to be able to interact with it from my application. Monitor is plugged using an HDMI cable to a video card (most probably nVidia). What is the simplest way to do this? All solutions are appreciated, including purchasing additional adapters or simple video cards, or any other special devices.

    Read the article

  • Ping and crawling not working, site still resolving

    - by Andrew Alexander
    Ok, so we're trying to figure out why the site of one of our clients isn't being crawled by Google (we've ruled out robots.txt or meta tags) When we go to the site, either IP address or domain name, the site resolves, everything works. However, Google is getting a 302 redirect (which it apparently isn't following for crawling), and when we ping the address, it times out (note, the site is still resolving in the browser throughout all of this). The site is built in ASP.Net (I assume C#) and so my thoughts were that it was an errant redirect rule, or some other sort of server side issue. We also thought that it might be due to incorrect domain pointing (but if we try to ping the IP, it doesn't work, so that sorta rules that out). We're really not sure what is causing all of these errors, or even if they have one single source. Anyone have any ideas what could be going on? Do you need any more information? To boil it down in a TL; dr: * Site resolving in browser, both IP and domain name. No problems here. * Site not being crawled by Google (gets a 302 it doesn't seem to follow) - it is not due to robots.txt or meta tags * Ping is not working for the IP address. This is very odd, because again, the IP address seems to work fine in the browser. * Our thoughts are either redirect rule issue, domain pointing issue, or possibly some errant code - or some combination of the three

    Read the article

  • RGB to DVI adapter not working for Projector-to-PC

    - by user897052
    We have a wall-mounted projector (dell 4320) with VGA In and the other end of the cable is RGB. We have an RGB to DVI-I adapter (w/ DIP switches) inorder to plug the cable into a PC (video card has 1 VGA and 1 DVI-I port). We had no problems until recently, when the PCs hard drive crashed. After re-imaging the PC, the computer no longer "sees" the projector (the computer doesn't detect the projector as a second monitor anymore). The PC is an older Dell with an after-market video card and runs win XP. I also tried it on a new HP box (win 7), but had to add a DVI-I to DVI-D adapter. Any ideas?

    Read the article

  • Free, simple, configurable SOCKS5 server

    - by Pooria Azimi
    I've been looking (for the past 6-7 hours) for a fast, free and configurable SOCKS5 server. I haven't found anything that matches my needs. They are either too complicated, too bare-bones or simply buggy as hell. This is (all) I need: I want it to run on Linux (and also OS X, preferably) I want it to listen on localhost:8888 When my app (say wget.. or curl --socks5=localhost:8888) requests http://www.google.com/search?q=asd (or any other url - both http and https), I want it to fetch the page not from google's servers, but from http://localhost:4444/cached?uri=http://www.google.com/search%3Fq%3Dasd. Nothing more! I don't need caching, or anything else. I just want a SOCKS5 server, running locally, which redirects all queries to my own (local) server. It could be written in C, C++, Python, PHP, Perl, Node.js or any other language. I don't care, as long as it supports my (very limited) needs, or I can easily change the source to make it so. Thanks a lot

    Read the article

  • Graphic driver for Targa Now NT9231

    - by Lumio
    I thought of installing Xubuntu on my elder Targa Now nettop and didn't think about the driver option. So now I'm here with a fresh Xubuntu installation and looking for graphic drivers. I found someone who might have had a "good" result with SiS - and the package is already installed, but I can't get my xorg.conf right. This is how my xorg.conf looks like right now: Section "Device" Identifier "Configured Video Device" Driver "sis" EndSection Section "Monitor" Identifier "Screen 0" Modeline "1024x768_60.00" 64.11 1024 1080 1184 1344 768 769 772 795 -HSync +Vsync #HorizSync 30.0-62.0 #VertRefresh 50.0-70.0 EndSection Section "Screen" Identifier "Default Screen" Monitor "Configured Monitor" Device "Configured Video Device" DefaultDepth 24 SubSection "Display" Depth 24 Modes "1024x768" "800x600" EndSubSection EndSection Thanks for every help given!

    Read the article

  • Old CRT screen's high resolution doesn't work anymore on windows 7

    - by Mixxiphoid
    One year ago I decided to switch from Windows XP to Windows 7. I had a 17" CRT monitor with a screen resolution of 1600x1200 which worked fine on Windows XP. While installing Windows 7 everything went well until Windows 7 was going to install the video card its driver. Windows 7 puts the screen to its recommended resolution and my screen became black. I waited a few minutes to be sure the installation was finished. I turned off the computer by hand and restarted the computer on a resolution of 800x640. When windows 7 was done installing I went to screen resolutions and the resolution of 1600x1200 was on the top of the list with '(recommended)' next to it. I tried putting it on 1600x1200 but again my screen went black. I installed all windows 7 updates including the video card driver from the NVidia site (NOT from Windows 7). I tried about everything to make it work on 1600x1200 but with no succes. The highest resolution I got with the crt monitor was 1280x1024. I had a TFT screen which had 1280x1024 as max resolution and had better colors, so I used that one till today. My video card is 9600GT and my power supply is beyond sufficient. I even tried to install the driver I had on XP to see if it worked, but no results. I tried classic mode on windows 7, changed the dpi, the frequentie and the monitor settings, but nothing worked. I really like a vertical resolution of 1200, but it seems today I'm bound to all those standard monitors with a resolution of 1980x1024... Can anybody explain to me what the cause is that it worked on Windows XP but not on Windows 7? And maybe a solution to the problem (I actually gave up on getting it fixed...) Thanks a lot in advance. SOLUTION I downloaded the according monitor driver and installed it. Next I rebooted my computer on low resolution (800x640) and connected the CRT monitor. When Windows 7 booted successfully I went to computer management and 'update the driver' of my monitor. I manually selected 'Generic PnP monitor' and made that one active. I want to advanced settings at 'Screen resolution' and selected the mode '1600x1200 (32-bit) 80 Hertz (95 Hertz did not work). Now I had my resolution on 1600x1200. I repeated the earlier step to select the original monitor again instead of the Generic monitor. Quite a way to solve this problem, but it worked! Thanks a lot you all.

    Read the article

  • Amazon EC2 Nat Instance - goes out but not back in

    - by nocode
    I've followed Amazon's steps and list what I've done. I've created 6 subnets (4 private SN1: 10.50.1.0/24, SN2: 10.50.2.0/24, SN3: 10.50.3.0/24, SN4: 10.50.4.0/24) and 2 public (SN5: 10.50.101.0/24 and SN6: 10.50.102.0/24) -I have a Bastion host and a NAT instance on SN5 and assigned EIP's to both. I created a test instance on SN1. edit: -NAT instance has source/destination check disabled -On the NAT instance, I had enabled the following commands to be bootstrapped: echo 1 > /proc/sys/net/ipv4/ip_forward iptables -t nat -A POSTROUTING -s 10.0.0.0/16 -j MASQUERADE -In my VPC, the private subnets have their own route table and configured 0.0.0.0/0 to the NAT instance with 4 subnets being associated with the route table. I have a second route table for my public subnets and 0.0.0.0/16 is pointed towards the IGW (with the other 2 subnets associated with it). -For Security Groups, I have the NAT instance accepting all traffic on each of the 4 subnets and all OUTBOUND traffic is allowed. For my test server, I have allowed all outbound access and have allowed all traffic from the public subnet of the NAT host. I can ping internally with no issues. On my test instance, if I try to ping google.com, DNS resolves however I don't get a reply back. On my NAT instance, I run a tcpdump and can see the request being requested to google.com but it's not sending the reply back. My NAT host can ping and receive a reply from google. From the test host, when I ping the NAT instance, the tcpdump shows a request and receive. Is there something I'm missing? EDIT: I've figured it out - I had to save the iptable config and restart the service.

    Read the article

< Previous Page | 590 591 592 593 594 595 596 597 598 599 600 601  | Next Page >