Search Results

Search found 19408 results on 777 pages for 'output formats'.

Page 595/777 | < Previous Page | 591 592 593 594 595 596 597 598 599 600 601 602  | Next Page >

  • Mail not piping in postfix

    - by user220912
    I have setup a postfix server and wanted to test the piping of mail to my perl script where i can make use of it and filter the mails.I wrote a test script for that which just logs the information in txt file. but i don't see any changes on sending the mail. My postconf-n output: alias_database = hash:/etc/aliases append_dot_mydomain = no command_directory = /usr/sbin config_directory = /etc/postfix daemon_directory = /usr/libexec/postfix data_directory = /var/lib/postfix debug_peer_level = 2 debugger_command = PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin ddd $daemon_directory/$process_name $process_id & sleep 5 html_directory = no inet_interfaces = all inet_protocols = all mail_owner = postfix mailbox_size_limit = 0 mailq_path = /usr/bin/mailq.postfix manpage_directory = /usr/share/man mydestination = yantratech.co.in, localhost.localdomain, localhost myhostname = tcmailer8.in mynetworks = 103.8.128.62, 103.8.128.69/101, 168.100.189.0/28, 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 myorigin = $mydomain newaliases_path = /usr/bin/newaliases.postfix queue_directory = /var/spool/postfix readme_directory = /usr/share/doc/postfix-2.6.6/README_FILES recipient_delimiter = + relayhost = sample_directory = /usr/share/doc/postfix-2.6.6/samples sendmail_path = /usr/sbin/sendmail.postfix smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) smtpd_tls_cert_file = /etc/pki/tls/certs/tcmailer8.in.cert smtpd_tls_key_file = /etc/pki/tls/private/localhost.key smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtpd_use_tls = yes transport_maps = hash:/etc/postfix/transport virtual_alias_maps = hash:/etc/postfix/virtual virtual_gid_maps = static:5000 virtual_mailbox_base = /home/vmail virtual_mailbox_domains = /etc/postfix/vhosts virtual_mailbox_maps = hash:/etc/postfix/vmaps virtual_minimum_uid = 1000 virtual_uid_maps = static:5000 here's my transport: [email protected] email_route my main.cf declaration: transport_maps = hash:/etc/postfix/transport my master.cf declaration: email_route unix - n n - - pipe flags=FR user=nobody argv=/etc/postfix/test.php -f $(sender) -- $(recipient) and my php script: #!/usr/bin/php <?php $fh = fopen('/etc/postfix/testmail.txt','a'); fwrite($fh, "Hello it works\n"); fclose($fh); ?> I am sending mails through telnet in localhost.

    Read the article

  • RD Gateway reporting features/capabilities

    - by Don
    We have just implemented RD Gateway for our own department in preparation for a push to the whole agency for telecommuting. It is all setup and working great, but I was trying to figure out how best to go about monitoring/reporting of users. I see third party software out there that will do it, but is there anything built-in or via powershell/scripting that I could use that would give me a report of the daily activity of users? Something to say, "User A connected at this time, was on for this long, sent/received this much data"? Basically some of the same stuff you can see in event viewer. Ideally I'd like to be able to have this setup so that once a day it emails me with the daily usage for when a supervisor asks about if their person is actually working (or at least online sending and receiving x amount of data), I'll have some metrics to give them. I realize that actual work output is relevant and more of a managerial issue, but I would like to be able to offer as much as I can from my end when asked. Thoughts? Thanks!

    Read the article

  • Creating a pseudoterminal to make sudo happy

    - by larsks
    I need to automate the provisioning of a cloud instance (running Fedora 17) for which the following initial facts are true: I have ssh-key based access to a remote user (cloud) That user has password-free root access via sudo. Manual configuration is as simple as logging in and running sudo su - and having at it, but I would like to fully automate this process. The trick is that the system defaults to having the requiretty option enabled for sudo, which means that an attempt to do something like this: ssh remotehost sudo yum -y install puppet Will fail: sudo: sorry, you must have a tty to run sudo I am working around this right now by first pushing over a small Python script that will run a command on a pseudoterminal: import os import sys import errno import subprocess pid, master_fd = os.forkpty() if pid == 0: # child process: now that we're attached to a # pty, run the given command. os.execvp(sys.argv[1], sys.argv[1:]) else: while True: try: data = os.read(master_fd, 1024) except OSError, detail: if detail.errno == errno.EIO: break if not data: break sys.stdout.write(data) os.wait() Assuming that this is named pty, I can then run: ssh remotehost ./pty sudo yum -y install puppet This works fine, but I'm wondering if there are solutions already available that I haven't considered. I would normally think about expect, but it's not installed by default on this system. screen can do this in a pinch, but the best I came up with was: screen -dmS sudo somecommand ...which does work but eats the output. Are there any other tools available that will allocate a pseudoterminal for me that are going to be generally available?

    Read the article

  • IIS 7, FastCGI, PHP and custom php.ini files

    - by Marlon
    I'm running PHP 5.3, FastCGI, and IIS 7 on Windows Server 2008. I have a site which I would like to configure its own php.ini settings for but things aren't working as expected. I am following the tutorial located here. This is what I have done so far: 1) Configured a new website with it's own AppPool. 2) Selected PHP 5.3.6 from the PHP Manager available on the website home on IIS (not the web server home which sets the global version of PHP) 3) Added the following lines to the section of the applicationHost.config file located at system32/inetsrv/config <application fullPath="C:\Program Files (x86)\PHP\v5.3\php-cgi.exe" arguments="-d open_basedir=C:\inetpub\wwwroot\kickasswebsite.com" maxInstances="4" idleTimeout="300" activityTimeout="30" requestTimeout="90" instanceMaxRequests="200" protocol="NamedPipe" queueLength="1000" flushNamedPipe="false" rapidFailsPerMinute="10"> <environmentVariables> <environmentVariable name="PHPRC" value="c:\inetpub\wwwroot\kickasswebsite.com" /> </environmentVariables> </application> 4) I then create a php.ini file located in C:\inetpub\wwwroot\kickasswebsite.com (the location of the root of the website) register_globals = on 5) I then run test.php which simply outputs everything the method call to phpinfo() returns. At this point, I observe that the global setting for register_globals = off (as it should be), but the local setting for register_globals = off, even though I specified it differently in the php.ini file I created at the root of the site. Furthermore, I see these settings in the output of the php.ini Configuration File (php.ini) Path C:\Windows Loaded Configuration File C:\Program Files (x86)\PHP\v5.3\php.ini Scan this dir for additional .ini files (none) Additional .ini files parsed (none) What am I messing up on, or is there a different way to go about this?

    Read the article

  • Multiple logins with pam_mount means multiple (redundant) mounts ...

    - by Jamie
    I've configured pam_mount.so to automagically mount a cifs share when users login; the problem is if a user logs into multiple times simultaneously, the mount command is repeated multiple times. This so far isn't a problem but it's messy when you look at the output of a mount command. # mount /dev/sda1 on / type ext4 (rw,errors=remount-ro) proc on /proc type proc (rw,noexec,nosuid,nodev) none on /sys type sysfs (rw,noexec,nosuid,nodev) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) none on /dev type devtmpfs (rw,mode=0755) none on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) none on /dev/shm type tmpfs (rw,nosuid,nodev) none on /var/run type tmpfs (rw,nosuid,mode=0755) none on /var/lock type tmpfs (rw,noexec,nosuid,nodev) none on /lib/init/rw type tmpfs (rw,nosuid,mode=0755) //srv1/UserShares/jrisk on /home/jrisk type cifs (rw,mand) //srv1/UserShares/jrisk on /home/jrisk type cifs (rw,mand) //srv1/UserShares/jrisk on /home/jrisk type cifs (rw,mand) I'm assuming I need to fiddle with either the pam.d/common-auth file or pam_mount.conf.xml to accomplish this. How can I instruct pam_mount.so to avoid duplicate mountings?

    Read the article

  • Only tunnel certain applications via OpenVPN

    - by jinjin
    Hi, I've purchased a VPN solution, it works correctly when I have "redirect-gateway def1" in the configuration file (routing all traffic through the VPN). However when I remove that line from the configuration file, I am still able to ping-out of the machine (ping -I tap0), however I cannot ping the IP assigned to the machine (it's a public ip), i get the error: Destination Host Unreachable. I only want to have certain applications sending traffic through the VPN tunnel (eg: ZNC, irssi), all of which i can select which IP they use. However they can't recieve any data, making the tunnel essentially useless to me when disabling redirect-gateway. Any ideas on how to allow specific applications use the tunnel, without of forcing everything to go through it? My configuration file is as follows: dev tap remote #.#.#.# float #.#.#.# port 5129 comp-lzo ifconfig #.#.#.# 255.255.255.128 route-gateway #.#.#.# #redirect-gateway def1 secret key.txt cipher AES-128-CBC The output of ifconfig -a when the tunnel is connected: tap0 Link encap:Ethernet HWaddr 00:ff:47:d3:6d:f3 inet addr:#.#.#.# Bcast:#.#.#.# Mask:255.255.255.255 inet6 addr: <snip> Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:612 errors:0 dropped:0 overruns:0 frame:0 TX packets:35 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:25704 (25.1 KiB) TX bytes:6427 (6.2 KiB) EDIT: the Bcast:#.#.#.# (ifconfig) is different from route-gateway #.#.#.# (openvpn) if that makes any difference.

    Read the article

  • How do I move a linked file on Unix?

    - by r3mbol
    I have a bunch of files in one directory and links to each one of those files in another directory. So ls -l looks something like this: lrwxrwxrwx 1 rembol rembol 89 Jan 25 10:00 copyright.txt -> /home/rembol/solr/target/deploy/data/core/copyright.txt lrwxrwxrwx 1 rembol rembol 92 Jan 25 10:00 jar-versions.xml -> /home/rembol/solr/target/deploy/data/core/jar-versions.xml lrwxrwxrwx 1 rembol rembol 85 Jan 25 10:00 lgpl.html -> /home/rembol/solr/target/deploy/data/core/lgpl.html lrwxrwxrwx 1 rembol rembol 79 Jan 25 10:00 lib -> /home/rembol/solr/target/deploy/data/core/lib lrwxrwxrwx 1 rembol rembol 87 Jan 25 10:00 readme.html -> /home/rembol/solr/target/deploy/data/core/readme.html drwxr-xr-x 3 rembol rembol 4096 Jan 25 10:00 server drwxr-xr-x 2 rembol rembol 4096 Jan 25 10:00 startup Now I want to move those linked files from /home/rembol/solr/target/deploy to /home/rembol/output/. If I do that my simply calling mv, links will break. I don't want to re-link each file separately, cause there are hundreds of them (they are generated automatically). Is there some clever way to move linked files, rather than writing a script that unlinks, moves and relinks recursively for each file in each subdirectory?

    Read the article

  • Hadoop streaming job on EC2 stays in "pending" state

    - by liamf
    Trying to experiment with Hadoop and Streaming using cloudera distribution CDH3 on Ubuntu. Have valid data in hdfs:// ready for processing. Wrote little streaming mapper in python. When I launch a mapper only job using: hadoop jar /usr/lib/hadoop/contrib/streaming/hadoop-streaming*.jar -file /usr/src/mystuff/mapper.py -mapper /usr/src/mystuff/mapper.py -input /incoming/STBFlow/* -output testOP hadoop duly decides it will use 66 mappers on the cluster to process the data. The testOP directory is created on HDFS. A job_conf.xml file is created. But the job tracker UI at port 50030 never shows the job moving out of "pending" state and nothing else happens. CPU usage stays at zero. (the job is created though) If I give it a single file (instead of the entire directory) as input, same result (except Hadoop decides it needs 2 mappers instead of 66). I also tried using the "dumbo" Python utility and launching jobs using that: same result: permanently pending. So I am missing something basic: could someone help me out with what I should look for? The cluster is on Amazon EC2. Firewall issues maybe: ports are enabled explicitly, case by case, in the cluster security group.

    Read the article

  • which grabber is good enough to get 1000fps?

    - by user261002
    I have two framegrabber with a fast camera (1800+ fps). can anybody who understand the hardware, explain to me which of the following grabbers can help me more to grab 1000fps ? here are the the features of the two grabbers : Inspecta-5 Full Camera Link® Version: · Support for line scan and area cameras. · Video data rate of up to 660 Mbytes/sec. · PCI – X bus interface for 64 Bit data width and 66 MHz clock frequency. · PCI bus interface for 32 Bit data width and 33 MHz clock frequency. · 2 Gigabyte Onboard Memory for fast video streams. · Four opt coupled input- output ports for external trigger and encoder signals. · 528 Mbytes/sec. maximum data rate on the PCI–X Bus. · SDK for Windows 2000/XP SILICONSOFTWARE V-Series Camera Link : “microEnable IV VD4-CL” · Camera Pixel Clock Support 85 MHz · Area Scan Cameras 32k * 64k max. image size · Line Scan Cameras 64k max. image width · Acquisition Buffer: 512 MB DDR-RAM · Sustainable Transfer Rate (max.) 850 MBytes/sec. · microEnable SDK for Windows XP/Vista/ 7/ Linux

    Read the article

  • How to force mdadm to stop RAID5 array?

    - by lucek
    I have /dev/md127 RAID5 array that consisted of four drives. I managed to hot remove them from the array and currently /dev/md127 does not have any drives: cat /proc/mdstat Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md0 : active raid1 sdd1[0] sda1[1] 304052032 blocks super 1.2 [2/2] [UU] md1 : active raid0 sda5[1] sdd5[0] 16770048 blocks super 1.2 512k chunks md127 : active raid5 super 1.2 level 5, 512k chunk, algorithm 2 [4/0] [____] unused devices: <none> and mdadm --detail /dev/md127 /dev/md127: Version : 1.2 Creation Time : Thu Sep 6 10:39:57 2012 Raid Level : raid5 Array Size : 8790402048 (8383.18 GiB 9001.37 GB) Used Dev Size : 2930134016 (2794.39 GiB 3000.46 GB) Raid Devices : 4 Total Devices : 0 Persistence : Superblock is persistent Update Time : Fri Sep 7 17:19:47 2012 State : clean, FAILED Active Devices : 0 Working Devices : 0 Failed Devices : 0 Spare Devices : 0 Layout : left-symmetric Chunk Size : 512K Number Major Minor RaidDevice State 0 0 0 0 removed 1 0 0 1 removed 2 0 0 2 removed 3 0 0 3 removed I've tried to do mdadm --stop /dev/md127 but: mdadm --stop /dev/md127 mdadm: Cannot get exclusive access to /dev/md127:Perhaps a running process, mounted filesystem or active volume group? I made sure that it's unmounted, umount -l /dev/md127 and confirmed that it indeed is unmounted: umount /dev/md127 umount: /dev/md127: not mounted I've tried to zero superblock of each drive and I get (for each drive): mdadm --zero-superblock /dev/sde1 mdadm: Unrecognised md component device - /dev/sde1 Here's output of lsof|grep md127: lsof|grep md127 md127_rai 276 root cwd DIR 9,0 4096 2 / md127_rai 276 root rtd DIR 9,0 4096 2 / md127_rai 276 root txt unknown /proc/276/exe What else can I do? LVM is not even installed so it can't be a factor.

    Read the article

  • Three server processes consume no more than 50% of Dual Core CPU

    - by thor
    I have three processes running on Intel Core 2 Duo CPU. From watching output of 'top' and graphs of CPU load (drawn by MRTG, data collection via SNMP) I can see that CPU load is never more than 50%, and, most of the day, when those processes are busy CPU load has a ceiling at 50 %. I mean, CPU load grows up to 50% in the morning and stays there until late evening. My first thought was that only one core was used at 100% thus giving 50% of both CPUs. But, as there are three processes running and from 'top' I see that both cores are being loaded, so this is not the case. schedtool shows that CPU affinity for those three processes is at default, 0x03, allowing them to use both cores. If I force one process to one core (schedtool -a 0x01), and two others to second (schedtool -a 0x02), cumulative usage grows beyond 50%. Why three processes seem to consume only 50% of two cores? Why forcing them to different CPUs allows usage to grow higher? Any hints? P.S. Processes in question are Counter-Strike servers.

    Read the article

  • MySQL command appends '@localhost' to username

    - by Mikee
    I just can't seem to figure this one out. I want to use the command line to connect to a MySQL database residing on another server. I went ahead and created the username and password for the user. I have also granted all privileges on that user for that database. When using the command: mysql -h <hostname> -u <username> -p, I get the following error: ERROR 1045 (28000): Access denied for user '<username>'@'<local_machine_hostname>' (using password: YES) The problem is that it keeps appending the current machine's hostname into the username. Obviously, that user@<local_machine_hostname> is not correct. It doesn't matter what I type. For instance, if I type: mysql -h <hostname> -u '<username>'@'<hostname>' -p It does the same, only in the error output, it says: Access denied for user '<username>@<hostname>'@'<local_machine_hostname>' Is there a setting in a configuration file which is allowing this to happen? It's really quite annoying. I need to set up a tikiwiki server, and it cannot connect because during the step where you set up mysql, it keeps appending the local machine's hostname to the mysql login name.

    Read the article

  • Converting flv and mp4 video format to '.ogg' using FFmpeg

    - by user163906
    I have HostGator VPS server with FFmpeg installed. It allows me to convert .wmv to .flv as well as .mp4 files successfully using the following commands for flv and mp4: ffmpeg -i WantsABath.wmv -b 600k -r 24 -ar 22050 -ab 96k WantsABath.flv ffmpeg -i WantsABath.wmv WantsABath.mp4 but it won't allow me to convert any file format to .ogg. I tried using the command: ffmpeg -i input.mp4 -acodec libvorbis -vcodec libtheora -f ogv output.ogv by mondain but no luck with it. I am doubting that my VPS doesn't have libtheora installed. I tried configuring it by using SSH but I don't know how to make sure if it is installed or not. I tried checking with php_info but can't find anything regarding libtheora. Here's my FFmpeg version: FFmpeg version SVN-r19795, Copyright (c) 2000-2009 Fabrice Bellard, et al. configuration: --enable-libmp3lame --enable-libvorbis --disable-mmx --enable-shared --prefix=/usr/ --enable-gpl libavutil 50. 3. 0 / 50. 3. 0 libavcodec 52.35. 0 / 52.35. 0 libavformat 52.38. 0 / 52.38. 0 libavdevice 52. 2. 0 / 52. 2. 0 libswscale 0. 7. 1 / 0. 7. 1 This details doean't show libtheor Can anyone please suggest me something?

    Read the article

  • Does anyone know how to "tcpdump" traffic decrypted by Mallory MITM? [migrated]

    - by chriv
    I'm looking for some help in capturing network traffic that I can analyze in Wireshare (or other tools). The tool I'm using is mallory. If anyone is familiar with mallory, I could use some help. I've got it configured and running correctly, but I don't know how to get the output that I want. The setup is on my private network. I have a VM (running Ubuntu 12.04 - precise) with two NICs: eth0 is on my "real" network eth1 is only on my "fake" network, and is using dnsmasq (for DNS and DHCP for other devices on the "fake" network) Effectively eth0 is the "WAN" on my VM, and eth1 is the "LAN" on my VM. I've setup mallory and iptables to intercept, decrypt, encrypt and rewrite all traffic coming in on destination port 443 on eth1. On the device I want intercepted, I have imported the ca.cer that mallory generated as a trusted root certificate. I need to analyze some strange behavior in the HTTPS stream between the client and server, so that's why mallory is setup in between for this MITM. I would like to take the decrypted HTTPS traffic and dump it to either a logfile or a socket in a format compatible with tcpdump/wireshark (so I can collect it later and analyze it). Running tcpdump on eth1 is too soon (it's encrypted), and running tcpdump on eth2 is too late (it's been re-encrypted). Is there a way to make mallory "tcpdump" the decrypted traffic (in both directions)?

    Read the article

  • Why do I need a managed switch and which one should I buy?

    - by ascanio1
    I bought a 2nd router and I want both routers to have direct WAN access to the modem. One of the 2 routers directs VOIP traffic to a telephone line port. This VOIP service is provided by the cable carrier which also leases the modem & the router. The cable company technician told me that this VOIP line uses IPv6 addressing and therefore I must employ an IPv6 capable/compliant Giga Hub/Switch or my telephone line won't work anymore. Pls advise me (brand/model) an IPv6 compliant, 2 port, switch to purchase. Pls educate me: By reading this forum I thought that hubs broadcast traffic to all ports, regardless of which input/output is being used and so, theoretically, they have nothing to do with IP. Correct? Same story for unmanaged switches, where the only difference is that these latter devices route traffic only to those ports which are detected to be in use. Correct? I also understood that unmanaged switches route traffic simply by detecting hardware use and not by selecting specific IP traffic. Correct? Finally, there are managed switches which DO select traffic based on IP and, therefore, only these managed switches are involved with IPv6... Why would my cable company explicitly tell me, over and over, that I must use an IPv6 compliant switch? Why would they need a managed switch instead of an unmanaged one? Thanks in advance for helping me understand!

    Read the article

  • Grub error 18, gparted not showing anything

    - by Montecristo
    Some week ago I started having some problems with my pc, sometimes it just freezed not allowing me to do anything. I had to turn it off and on and sometimes do it a couple of time even at startup. Now it does not start at all, grub is giving me error 18. I have found that a solution is to create a bootable partition in the first sector of the disk. gparted does not recognize any partition, the window in which there would be my partitions is empty. sudo fdisk -l does not output anything. If I type sudo mount /dev/sda and then tab tab to autocomplete these are the devices coming out: sda sda1 sda2 sda5. If I launch sudo mount -t ext3 /dev/sda1 disk I get the following error: mount: wrong fs type, bad option, bad superblock on /dev/sda1, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so dmesg outputs [ 1831.974847] EXT3-fs: unable to read superblock Do you know how to solve this issue? I'm not completely sure this is a software problem, should I try with a new hard disk?

    Read the article

  • Ubuntu 12.10, Unity, AMD 12.11 beta drivers, AMD APP SDK 2.7 and OpenCL detection of multiple gpus

    - by junkie
    I'm using Ubuntu 12.10, AMD 12.11 beta drivers, AMD APP SDK 2.7 and OpenCL. I have three amd radeon 7990s plugged in each of which are a dual 7970 so I have six gpus altogether. I plan to go up to eight in a few days. Windows couldn't use even 4 but linux works fine with 6 so far. The strange thing is that the six gpus are only detected by OpenCL in unity (the ubuntu default window manager). If I switch to e17, blackbox or fluxbox or anything else for that matter OpenCL only detects one. I'm using a simple OpenCL program to list all devices to check. I've also checked the output of aticonfig --list-adapters, fglxinfo and clinfo. The first two always show six in all window managers wheras clinfo shows 6 in unity but 1 gpu in all other WMs. I'm also using an X config generated by aticonfig --initial -f --adapter=all. I'm also only using one monitor. I've also checked using lsmod that the fglrx module is loaded in all WMs. So I have two questions. Why does OpenCL see six gpus only in unity? How can I enable six gpus on other lightweight WMs? Basically I'm getting at what determines how many gpus the OpenCL runtime sees? Thanks.

    Read the article

  • Can't seem to get C TCP Server-Client Communications Right

    - by Zeesponge
    Ok i need some serious help here. I have to make a TCP Server Client. When the Client connects to server using a three stage handshake. AFterwards... while the Client is running in the terminal, the user enters linux shell commands like xinput list, ls -1, ect... something that uses standard output. The server accepts the commands and uses system() (in a fork() in an infinite loop) to run the commands and the standard output is redirected to the client, where the client prints out each line. Afterward the server sends a completion signal of "\377\n". In which the client goes back to the command prompt asking for a new command and closes its connection and exit()'s when inputting "quit". I know that you have to dup2() both the STDOUT_FILENO and STDERR_FILENO to the clients file descriptor {dup2(client_FD, STDOUT_FILENO). Everything works accept when it comes for the client to retrieve system()'s stdout and printing it out... all i get is a blank line with a blinking cursor (client waiting on stdin). I tried all kinds of different routes with no avail... If anyone can help out i would greatly appreciate it TCP SERVER CODE include #include <sys/socket.h> #include <stdio.h> #include <string.h> #include <netinet/in.h> #include <signal.h> #include <unistd.h> #include <stdlib.h> #include <errno.h> //Prototype void handle_client(int connect_fd); int main() { int server_sockfd, client_sockfd; socklen_t server_len, client_len; struct sockaddr_in server_address; struct sockaddr_in client_address; server_sockfd = socket(AF_INET, SOCK_STREAM, 0); server_address.sin_family = AF_INET; server_address.sin_addr.s_addr = htonl(INADDR_ANY); server_address.sin_port = htons(9734); server_len = sizeof(server_address); bind(server_sockfd, (struct sockaddr *)&server_address, server_len); /* Create a connection queue, ignore child exit details and wait for clients. */ listen(server_sockfd, 10); signal(SIGCHLD, SIG_IGN); while(1) { printf("server waiting\n"); client_len = sizeof(client_address); client_sockfd = accept(server_sockfd, (struct sockaddr *)&client_address, &client_len); if(fork() == 0) handle_client(client_sockfd); else close(client_sockfd); } } void handle_client(int connect_fd) { const char* remsh = "<remsh>\n"; const char* ready = "<ready>\n"; const char* ok = "<ok>\n"; const char* command = "<command>\n"; const char* complete = "<\377\n"; const char* shared_secret = "<shapoopi>\n"; static char server_msg[201]; static char client_msg[201]; static char commands[201]; int sys_return; //memset client_msg, server_msg, commands memset(&client_msg, 0, sizeof(client_msg)); memset(&server_msg, 0, sizeof(client_msg)); memset(&commands, 0, sizeof(commands)); //read remsh from client read(connect_fd, &client_msg, 200); //check remsh validity from client if(strcmp(client_msg, remsh) != 0) { errno++; perror("Error Establishing Handshake"); close(connect_fd); exit(1); } //memset client_msg memset(&client_msg, 0, sizeof(client_msg)); //write remsh to client write(connect_fd, remsh, strlen(remsh)); //read shared_secret from client read(connect_fd, &client_msg, 200); //check shared_secret validity from client if(strcmp(client_msg, shared_secret) != 0) { errno++; perror("Invalid Security Passphrase"); write(connect_fd, "no", 2); close(connect_fd); exit(1); } //memset client_msg memset(&client_msg, 0, sizeof(client_msg)); //write ok to client write(connect_fd, ok, strlen(ok)); // dup2 STDOUT_FILENO <= client fd, STDERR_FILENO <= client fd dup2(connect_fd, STDOUT_FILENO); dup2(connect_fd, STDERR_FILENO); //begin while... while read (client_msg) from server and >0 while(read(connect_fd, &client_msg, 200) > 0) { //check command validity from client if(strcmp(client_msg, command) != 0) { errno++; perror("Error, unable to retrieve data"); close(connect_fd); exit(1); } //memset client_msg memset(&client_msg, 0, sizeof(client_msg)); //write ready to client write(connect_fd, ready, strlen(ready)); //read commands from client read(connect_fd, &commands, 200); //run commands using system( ) sys_return = system(commands); //check success of system( ) if(sys_return < 0) { perror("Invalid Commands"); errno++; } //memset commands memset(commands, 0, sizeof(commands)); //write complete to client write(connect_fd, complete, sizeof(complete)); } } TCP CLIENT CODE #include <sys/types.h> #include <sys/socket.h> #include <stdio.h> #include <string.h> #include <netinet/in.h> #include <arpa/inet.h> #include <unistd.h> #include <stdlib.h> #include <errno.h> #include "readline.c" int main(int argc, char *argv[]) { int sockfd; int len; struct sockaddr_in address; int result; const char* remsh = "<remsh>\n"; const char* ready = "<ready>\n"; const char* ok = "<ok>\n"; const char* command = "<command>\n"; const char* complete = "<\377\n"; const char* shared_secret = "<shapoopi>\n"; static char server_msg[201]; static char client_msg[201]; memset(&client_msg, 0, sizeof(client_msg)); memset(&server_msg, 0, sizeof(server_msg)); /* Create a socket for the client. */ sockfd = socket(AF_INET, SOCK_STREAM, 0); /* Name the socket, as agreed with the server. */ memset(&address, 0, sizeof(address)); address.sin_family = AF_INET; address.sin_addr.s_addr = inet_addr(argv[1]); address.sin_port = htons(9734); len = sizeof(address); /* Now connect our socket to the server's socket. */ result = connect(sockfd, (struct sockaddr *)&address, len); if(result == -1) { perror("ACCESS DENIED"); exit(1); } //write remsh to server write(sockfd, remsh, strlen(remsh)); //read remsh from server read(sockfd, &server_msg, 200); //check remsh validity from server if(strcmp(server_msg, remsh) != 0) { errno++; perror("Error Establishing Initial Handshake"); close(sockfd); exit(1); } //memset server_msg memset(&server_msg, 0, sizeof(server_msg)); //write shared secret text to server write(sockfd, shared_secret, strlen(shared_secret)); //read ok from server read(sockfd, &server_msg, 200); //check ok velidity from server if(strcmp(server_msg, ok) != 0 ) { errno++; perror("Incorrect security phrase"); close(sockfd); exit(1); } //? dup2 STDIN_FILENO = server socket fd? //dup2(sockfd, STDIN_FILENO); //begin while(1)/////////////////////////////////////// while(1){ //memset both msg arrays memset(&client_msg, 0, sizeof(client_msg)); memset(&server_msg, 0, sizeof(server_msg)); //print Enter Command, scan input, fflush to stdout printf("<<Enter Command>> "); scanf("%s", client_msg); fflush(stdout); //check quit input, if true close and exit successfully if(strcmp(client_msg, "quit") == 0) { printf("Exiting\n"); close(sockfd); exit(EXIT_SUCCESS); } //write command to server write(sockfd, command, strlen(command)); //read ready from server read(sockfd, &server_msg, 200); //check ready validity from server if(strcmp(server_msg, ready) != 0) { errno++; perror("Failed Server Communications"); close(sockfd); exit(1); } //memset server_msg memset(&server_msg, 0, sizeof(server_msg)); //begin looping and retrieving from stdin, //break loop at EOF or complete while((read(sockfd, server_msg, 200) != 0) && (strcmp(server_msg, complete) != 0)) { //while((fgets(server_msg, 4096, stdin) != EOF) || (strcmp(server_msg, complete) == 0)) { printf("%s", server_msg); memset(&server_msg, 0, sizeof(server_msg)); } } }

    Read the article

  • Postgresql connection refused

    - by Jonathan
    I'm trying to remotely connect to my postgresql database. I have two virtual machines set up both running ubuntu 14.04. I am trying to connect to the second vm using the first vm using psql -h 10.0.1.23 -U postgres -d postgres But I receive the error: Could not connect to server: Connection refused Is the server running on host "10.0.1.23" and accepting TCP/IP connections on port 5432? I have changed the pg_hba.conf and added host all all 10.0.1.64/24 md5 host all all * md5 host all all 0.0.0.0/0 md5 And changed the postgresql.conf listen_address=" * " In an attempt to allow all incoming connections. I have also tried to change the firewall settings, but I am unsure of whether or not the ports are properly listening for the connection. Edit: Output of netstat -an | grep -E '^tcp[^6].*LISTEN' tcp 0 0 127.0.1.1:53 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:23 0.0.0.0:* LISTEN tcp 0 0 127.0.0.1:5432 0.0.0.0:* LISTEN

    Read the article

  • _default_ VirtualHost overlap on port 443, the first has precedence

    - by Mohit Jain
    I have two ruby on rails 3 applications running on same server, (ubuntu 10.04), both with SSL. Here is my apache config file: <VirtualHost *:80> ServerName example1.com DocumentRoot /home/me/example1/production/current/public </VirtualHost> <VirtualHost *:443> ServerName example1.com DocumentRoot /home/me/example1/production/current/public SSLEngine on SSLCertificateFile /home/me/example1/production/shared/example1.crt SSLCertificateKeyFile /home/me/example1/production/shared/example1.key SSLCertificateChainFile /home/me/example1/production/shared/gd_bundle.crt SSLProtocol -all +TLSv1 +SSLv3 SSLCipherSuite HIGH:MEDIUM:!aNULL:+SHA1:+MD5:+HIGH:+MEDIUM </VirtualHost> <VirtualHost *:80> ServerName example2.com DocumentRoot /home/me/example2/production/current/public </VirtualHost> <VirtualHost *:443> ServerName example2.com DocumentRoot /home/me/example2/production/current/public SSLEngine on SSLCertificateFile /home/me/example2/production/shared/iwanto.crt SSLCertificateKeyFile /home/me/example2/production/shared/iwanto.key SSLCertificateChainFile /home/me/example2/production/shared/gd_bundle.crt SSLProtocol -all +TLSv1 +SSLv3 SSLCipherSuite HIGH:MEDIUM:!aNULL:+SHA1:+MD5:+HIGH:+MEDIUM </VirtualHost> Whats the issue: On restarting my server it gives me some output like this: * Restarting web server apache2 [Sun Jun 17 17:57:49 2012] [warn] _default_ VirtualHost overlap on port 443, the first has precedence ... waiting [Sun Jun 17 17:57:50 2012] [warn] _default_ VirtualHost overlap on port 443, the first has precedence On googling why this issue is coming I got something like this: You cannot use name based virtual hosts with SSL because the SSL handshake (when the browser accepts the secure Web server's certificate) occurs before the HTTP request, which identifies the appropriate name based virtual host. If you plan to use name-based virtual hosts, remember that they only work with your non-secure Web server. But not able to figure out how to run two ssl application on same server. Can any one help me?

    Read the article

  • Access NFS share from cygwin?

    - by Jason Voegele
    We have a Windows 2003 Server on which we have installed Microsoft's Services for UNIX, and we have mounted a few NFS shares that contain shared resources that we need to access from this box. When I log in to this server with remote desktop, I am able to browse the contents of the NFS shares and everything works fine. However, one use case that we have is that we need to access this server using SSH, and still be able to access the NFS shares. We are running the Cygwin SSH daemon to provide SSH access to the server, but for some reason when we log in to the Windows 2003 server using SSH we can no longer access the NFS shares. To demonstrate, here is the output of the 'mount' command, first from a Cygwin shell when logged in with remote desktop: $ mount C:/cygwin/bin on /usr/bin type ntfs (binary,auto) C:/cygwin/lib on /usr/lib type ntfs (binary,auto) C:/cygwin on / type ntfs (binary,auto) C: on /cygdrive/c type ntfs (binary,posix=0,user,noumount,auto) O: on /cygdrive/o type nfs (binary,posix=0,user,noumount,auto) P: on /cygdrive/p type nfs (binary,posix=0,user,noumount,auto) Z: on /cygdrive/z type nfs (binary,posix=0,user,noumount,auto) And now, the same 'mount' command when logged in with SSH: $ mount C:/cygwin/bin on /usr/bin type ntfs (binary,auto) C:/cygwin/lib on /usr/lib type ntfs (binary,auto) C:/cygwin on / type ntfs (binary,auto) C: on /cygdrive/c type ntfs (binary,posix=0,user,noumount,auto) Notice the missing O: P: and Z: NFS shares in the latter. Can anyone tell me why I am unable to see these NFS shares when logged in with SSH? Thanks!

    Read the article

  • PC -> TV HDMI suddenly doesn't work, any other option does

    - by XSlicer
    So my parents wanted to connect their PC to their TV, so they bought a 10m (35 ft) cable. It all worked perfectly. Then my mom tripped over the cable, breaking it. She somehow got a free replacement, but at the same time some more expensive one from an uncle. Now the problem is that this suddenly doesn't work anymore (TV saying "Format not supported"). I've tried several other things to pinpoint the actual problem, but none brought me something conslusive: PC (hdmi) to TV doesn't work (both cables) PC (hdmi) to TV doesn't work (short cable) Laptop (hdmi) to TV work (same cables) BluRay (hdmi) to TV works (same cables) PC (hdmi) to monitor works (same cables) PC (DVI w/ adapter HDMI) to TV works (same cables) I've tried different ports, tried Linux, reinstalling drivers (the graphics card is internal using an i5 sandy bridge. Normally it's running Windows 7 Home Prem, the TV being a Philips 37PFL7605H). So basically, everything works, except that thing what we want. The only things I am thinking of is that the sound is interfering or that the HDMI-output is somehow broken. Or is it anything else? I'm kind of lost.

    Read the article

  • Can't mount Linux usb disk. It just create /dev/sg device but no /dev/sd

    - by MTilsted
    I have a Corsair R60 ssd disk which is a disk with both sata and usb connectors. But the usb thing seems to be a bit non-standard, or maybe its just my fedora linux. When I insert the disk using a usb cabel to a running Fedora 14 linux system, a device called /dev/sg3 is added but that is all. No new /dev/sd* device is created so I can't mount the disk. If I look at cat /proc/scsi/sg/device_strs I get ATA Hitachi HTS54321 FB2O HL-DT-ST DVDRAM GSA-T50N RP05 Seagate Desktop 0130 Corsair CSSD-R60GB2 So the disk is there. (The last entry) but my linux will for some reason not see it as a usb hard disk. When I insert other usb disks they work fine. It is only this specific disk which causes problems. I have tried on 3 different computers with the same result. A hint to the problem may be that if I add the disk to a windows system(With usb) the disk is called "A fixed disk" and not a portable disk as expected. The disk works fine with linux If i connect it with the sata cabel, but I would really like to have it working with usb too. (To mount it on computers without sata). Added: I did try to mount /dev/sg3 but mount say that its not a block device. (File say Its a character special device). Added output from dmesg: [ 97.454073] usb 7-1: USB disconnect, address 2 [ 105.913055] hub 2-0:1.0: unable to enumerate USB device on port 3 [ 107.048054] usb 2-3: new high speed USB device using ehci_hcd and address 5 [ 107.162900] usb 2-3: New USB device found, idVendor=1b1c, idProduct=1ab8 [ 107.162903] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=5 [ 107.162906] usb 2-3: Product: CSSD-R60GB2 [ 107.162908] usb 2-3: Manufacturer: Corsair [ 107.162910] usb 2-3: SerialNumber: 10111441000000990069 [ 107.167651] scsi7 : usb-storage 2-3:1.0 [ 108.195543] scsi 7:0:0:0: Direct-Access Corsair CSSD-R60GB2 PQ: 1 ANSI: 0 [ 108.197732] scsi 7:0:0:0: Attached scsi generic sg3 type 0

    Read the article

  • Setting up vsftpd, hangs on list command

    - by Victor
    I installed vsftpd and configured it. When I try to connect to the ftp server using Transmit, it manages to connect but hangs on Listing "/" Then, I get a message stating: Could not retrieve file listing for “/”. Control connection timed out. Does it have anything to do with my iptables? My rules are as listed: *filter # Allows all loopback (lo0) traffic and drop all traffic to 127/8 that doesn't use lo0 -A INPUT -i lo -j ACCEPT -A INPUT ! -i lo -d 127.0.0.0/8 -j REJECT # Accepts all established inbound connections -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT # Allows all outbound traffic # You can modify this to only allow certain traffic -A OUTPUT -j ACCEPT # Allows HTTP and HTTPS connections from anywhere (the normal ports for websites) -A INPUT -p tcp -m tcp --dport 80 -j ACCEPT -A INPUT -p tcp -m tcp --dport 443 -j ACCEPT -A INPUT -p tcp -m tcp --dport 21 -j ACCEPT # Allows SSH connections # # THE -dport NUMBER IS THE SAME ONE YOU SET UP IN THE SSHD_CONFIG FILE # -A INPUT -p tcp -m state --state NEW --dport 30000 -j ACCEPT # Allow ping -A INPUT -p icmp -m icmp --icmp-type 8 -j ACCEPT # log iptables denied calls -A INPUT -m limit --limit 5/min -j LOG --log-prefix "iptables denied: " --log-level 7 # Reject all other inbound - default deny unless explicitly allowed policy -A INPUT -j REJECT -A FORWARD -j REJECT COMMIT

    Read the article

  • OS X (10.6) Apache Sudden Death, Nginx not working either...

    - by Jesse Stuart
    Hi, I turned on my computer today and apache wasn't working. This is weird as its been working for the last 6 months without issue. The only thing I did which may of caused a problem, is I uninstalled a bunch of gems. This shouldn't be the issue though as apache doesn't rely on gems. I decided to give nginx a try to see if it would work and have the exact same issue. The symtoms are: I go to http://localhost and get the browsers default 404 page (not rendered by apache/nginx) No error is found anywhere (I checked all logs) Apache is rinning (also tried with Nginx) How can I debug this to find the root of the problem? I can't think of why this would be happening. I've tried repairing permissions in case this was the issue, apparently it wasn't. Everything was working the other day, and nothing changed in the apache config. Update: Here is the output of telnet localhost 80 $ telnet localhost 80 Trying ::1... telnet: connect to address ::1: Connection refused Trying fe80::1... telnet: connect to address fe80::1: Connection refused Trying 127.0.0.1... telnet: connect to address 127.0.0.1: Connection refused telnet: Unable to connect to remote host

    Read the article

< Previous Page | 591 592 593 594 595 596 597 598 599 600 601 602  | Next Page >