Search Results

Search found 19408 results on 777 pages for 'output formats'.

Page 602/777 | < Previous Page | 598 599 600 601 602 603 604 605 606 607 608 609  | Next Page >

• fglrx-legacy-driver not seeing Radeon HD 4650 AGP

  - by Rocket Hazmat

  I am running Debian Squeeze on an old Dell Dimension 8300 box. It has an AGP Radeon HD 4650 card. I use this machine to mine bitcoins, and today I noticed that the machine had rebooted! My precious uptime! Anyway, my miner wouldn't start, so I figured might as well update my graphics driver, maybe that would fix the issue. I went to amd.com and downloaded the newest driver (12.6 legacy), but after installing it, aticonfig gave an error: aticonfig: No supported adapters detected I uninstalled the driver and figured I'd try to install it from apt. AMD has dropped support for the HD 4000 series in fglrx, forcing me to use fglrx-legacy-driver (currently only in experimental). In order to install this, I had to update libc6 (and some other important packages, like gcc), I had to use their wheezy versions. I finally got glrx-legacy-driver installed, but I still got: aticonfig: No supported adapters detected Why isn't the driver finding my video card? I have a hunch it has something to do with the fact that it's an AGP video card. Here is the output of lspci -v (why does it say Kernel driver in use: fglrx_pci?): 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RV730 Pro AGP [Radeon HD 4600 Series] (prog-if 00 [VGA controller]) Subsystem: Advanced Micro Devices [AMD] nee ATI Device 0028 Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 16 Memory at e0000000 (32-bit, prefetchable) [size=256M] I/O ports at de00 [size=256] Memory at fe9f0000 (32-bit, non-prefetchable) [size=64K] Expansion ROM at fea00000 [disabled] [size=128K] Capabilities: [50] Power Management version 3 Capabilities: [58] AGP version 3.0 Kernel driver in use: fglrx_pci

  Read the article

• mysql disk io keeps increasing ... is that normal?

  - by trustfundbaby

  So I've been trying to figure out this disk IO problem I have been having with my linode VPS. Over the last day or two I've just left watch -n1 pidstat -d running in a console window and the output looks like this: Monitoring it over the last few days, I've noticed that my problem lies with the init, searchd, and mysql processes. Searchd is sphinx and all its indexes are on disk, so disk io there is inevitable (apparently). What I can't understand is why the disk reads (kB_rd/s) for mysql refuse to stabilize and just keep going up. It started out at 154 yesterday and is up to what you see in that screen shot. but disk writes (kB_wr/s) have remained pretty constant the entire time. My VPS only has 768MB RAM, my mysql db has a size of about 220MB and after running mysqltuner.pl and reading a bit about it, I've been advised to set my innodb_buffer_pool_size to 220MB but I simply cannot afford to do that ... I have it up to 150MB. My question is twofold. Why does the init process have that much disk reading to do? Why is mysql doing so much disk reading?

  Read the article

• Failed Software RAID0 on Linux - Attempting to recover data

  - by Gizmo_the_Great

  I have a two disk RAID0 software raid (not hardware raid) that is reported to have failed during boot and my OS won't start. Using a Live CD, I get the following output : sudo mdadm -E /dev/sdc1 /dev/sdd1 /dev/sdc1: Magic : a92b4efc Version : 1.2 Feature Map : 0x0 Array UUID : 3710713d:fb301031:84b61247:d1d53e0f Name : HP-xw9300:0 Creation Time : Sun Sep 1 15:22:26 2013 Raid Level : -unknown- Raid Devices : 0 Avail Dev Size : 1465145328 (698.64 GiB 750.15 GB) Data Offset : 16 sectors Super Offset : 8 sectors State : active Device UUID : ad427cd2:9f885f57:7f41015f:90f8f6af Update Time : Sun Jun 8 12:35:11 2014 Checksum : a37407ff - correct Events : 1 Device Role : spare Array State : ('A' == active, '.' == missing) /dev/sdd1: Magic : a92b4efc Version : 1.2 Feature Map : 0x0 Array UUID : 3710713d:fb301031:84b61247:d1d53e0f Name : HP-xw9300:0 Creation Time : Sun Sep 1 15:22:26 2013 Raid Level : -unknown- Raid Devices : 0 Avail Dev Size : 976771056 (465.76 GiB 500.11 GB) Data Offset : 16 sectors Super Offset : 8 sectors State : active Device UUID : 2ea0199d:cb08d9e7:0830448a:a1e1e348 Update Time : Sun Jun 8 13:06:19 2014 Checksum : 8883c492 - correct Events : 1 Device Role : spare Array State : ('A' == active, '.' == missing) GParted lists both disks, detects the flags as 'Raid' and lists the data usage. Can anyone please help me re-assemble just so that I can copy some of the data off that I have not backed up recently? Thanks

  Read the article

• How much free memory should I have on my webserver?

  - by neanderslob

  I have a webserver that's currently hosting two Wordpress sites and some java-based collaboration software. The server has 2G of memory and is currently using about 1.8G of the available memory. Right now what's on here is pretty much a pilot project that's getting negligible traffic so I think it's pretty clear that I'll be needing more memory. I was wondering, if I was to release it, how I might anticipate my memory needs based on the traffic it gets. I've poked around on Google and what I've found has been a bit tenuous. Is there a good heuristic that one should use when calculating memory demands as a function of the base (no traffic) load on the server? For reference, the output of free -m can be seen below: total used free shared buffers cached Mem: 2048 1832 215 0 0 0 -/+ buffers/cache: 1832 215 Swap: 0 0 0 To me this looks like actual memory used and isn't an illusion due to caching or anything else. I figure the demands of my collaboration software will have to be experimentally tested so here's free -m without that software running: total used free shared buffers cached Mem: 2048 1109 938 0 0 0 -/+ buffers/cache: 1109 938 Swap: 0 0 0 My plan B to figure this out is to add a bunch of swap space to the server, give it some traffic and adjust according the the amount that swap gets used. I was just wondering if anyone had a good rule of thumb to estimate how much memory I should plan on in advance...or if what I'm thinking is nuts. Many thanks in advance (I'm really quite new to this).

  Read the article

• Google Chrome on Linux not using ALSA for sound

  - by DarkMoon

  On my laptop, I've got an .asoundrc file that outputs sound to my USB headset. This works fine for SMplayer and Firefox. However, Google Chrome (at least, Flash-based and HTML5-based videos and HTML5-based audio in Chrome) plays through the laptop speakers instead. I've tried running Chrome from a command-line, hoping there would be some helpful output, but no such luck. I've tried looking through Google for whether Chrome even uses ALSA, or if it uses something else, but I have been unsuccessful in this. This question seems to be the same issue, but no suggestion was made. Anyone have any ideas? I'm running Gentoo with a 3.10.17 kernel, 1.0.27 ALSA utils, 2.6.5 FVWM, and 36.0.1985.143 Chrome. If you need more info, please let me know. EDIT: I've configured the USB headset as the default ALSA device. Volume levels for both headset and onboard are set and un-muted using alsamixer. My .asoundrc file is as follows. ctl.!default { type hw card Headset } pcm.dmixer { type dmix ipc_key 1024 slave { pcm { type hw card Headset } period_size 1024 buffer_size 4096 } bindings { 0 0 1 1 } } pcm.!default { type plug slave.pcm dmixer }

  Read the article

• iptables port redirection on Ubuntu

  - by Xi.

  I have an apache server running on 8100. When open http://localhost:8100 in browser we will see the site running correctly. Now I would like to direct all request on 80 to 8100 so that the site can be accessed without the port number. I am not familiar with iptables so I searched for solutions online. This is one of the methods that I have tried: user@ubuntu:~$ sudo iptables -A INPUT -p tcp --dport 80 -j ACCEPT user@ubuntu:~$ sudo iptables -A INPUT -p tcp --dport 8100 -j ACCEPT user@ubuntu:~$ sudo iptables -t nat -A PREROUTING -p tcp --dport 80 -j REDIRECT --to-ports 8100 It's not working. The site works on 8100 but it's not on 80. If print out the rules using "iptables -t nat -L -n -v", this is what I see: user@ubuntu:~$ sudo iptables -t nat -L -n -v Chain PREROUTING (policy ACCEPT 14 packets, 2142 bytes) pkts bytes target prot opt in out source destination 0 0 REDIRECT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 redir ports 8100 Chain INPUT (policy ACCEPT 14 packets, 2142 bytes) pkts bytes target prot opt in out source destination Chain OUTPUT (policy ACCEPT 177 packets, 13171 bytes) pkts bytes target prot opt in out source destination Chain POSTROUTING (policy ACCEPT 177 packets, 13171 bytes) pkts bytes target prot opt in out source destination The OS is a Ubuntu on a VMware. I thought this should be a simple task but I have been working on it for hours without success. :( What am I missing?

  Read the article

• Upstart multiple instances of service not working.

  - by Dax

  I started playing with MongoDB on Lucid. Now I would like to run a DB and Config server on the same box. They both use the same binary to launch, but with different config files and running on different ports. All directories for log and lib is split so one goes to mongodb and the other to mongoconf. Each process can be started without any problems on their own. start mongodb stop mongodb start mongoconf stop mongoconf But if I try to start both, the second one would just start and exit. Using 'initctl log-priority debug' I got the following in the logs. Jan 6 12:44:12 mongo4 init: event_finished: Finished started event Jan 6 12:44:12 mongo4 init: job_process_handler: Ignored event 1 (1) for process 5690 Jan 6 12:44:12 mongo4 init: mongoconf (mongoconf) main process (5690) terminated with status 1 Jan 6 12:44:12 mongo4 init: mongoconf (mongoconf) goal changed from start to stop Jan 6 12:44:12 mongo4 init: mongoconf (mongoconf) state changed from running to stopping man 5 init shows that you can use instance names to differentiate the two. I tried using 'instance mongoconf' in the on upstart script and 'instance mongodb' in the other one, and it still fails. I can manually start the other process, so there is definitely no conflicts on port numbers or directories. Any ideas on what to try or how to get output on why it is 'terminated with status 1'? Thanx

  Read the article

• Locate devices within a building

  - by ams0

  The situation: Our company is spread between two floors in a building. Every employee has a laptop (macbook Air or MacbookPro) and an iPhone. We have static DHCP mappings and DNS resolution so every mobile gets a name like employeeiphone.example.com, every macbook air gets a employeelaptop.example.com and every macbook pro gets a employeelaptop.example.com on the Ethernet interface (the wifi gets a dynamic IP from a small range dedicated for the purpose). We know each and every MAC address of phones and laptops, since we do DHCP static mapping (ISC DHCP server runs on linux). At each floor we have a Netgear stack of two switches, connected via 10GB fiber to each other. No VLANs so far. At every floor there are 4 Airport Extreme making a single SSID network with WPA2 authentication. The request: Our CTO wants to know who is present at which floor. My solution (so far): Every switch contains an table listing MAC address and originating port. On each switch stack, all the MAC addresses coming from the other floor are listed as coming on port 48 (the fiber link). So I came up with: 1) Get the table from each switch via SNMP 2) Filter out the ones associated with port 48 3) Grep dhcpd.conf, removing all entries not *laptop and not *iphone 4) Match the two lists for each switch, output in JSON or XML 5) present the results on a dashboard for all to see I wrote it in bash with a lot of awk and sed, it kinda works but I always have for some reason stale entries in the switch lookup tables, making it unreliable; some people may have put their laptop to sleep, their iphones drop connections after a while, if not woken up and so on..I searched left and right, we are prepared to spend a little on the project too (RFIDs?), does anybody do something similar? I can provide with the script if needed (although it's really specific to our switches and naming scheme). Thanks! p.s. perhaps is this a question for stackoverflow? please move if it so.

  Read the article

• Am I obliged to use ipv6 tunnel services if I want to be able to use it?

  - by Zagorax

  I was looking for configuring Slackware to use ipv6 but all instruction I found speak about using an ipv6 tunnel that encapsulate ipv6 request into ipv4 packet and send them to an external router that extracts ipv6 request and sends a reply (or, at least, this is what I understood). Is that necessary? Isn't there a way to configure a pure ipv6 system? If yes, could you please point me to a guide that clearly explain how to enable ipv6 without this trick? I would like to configure my Slackware desktop at first, and then do the same with my Centos server. EDIT: maybe I gave you too few information. Sorry. I'll write some more information thanks to the posted guide. ~$ test -f /proc/net/if_inet6 && echo "Running kernel is IPv6 ready" Running kernel is IPv6 ready So, it seems ipv6 is enabled in my kernel. Some other output from ifconfig, route and /etc/resolv.conf content (with opendns): ~$ /sbin/ifconfig wlan0 | grep inet6 inet6 addr: fe80::21f:3bff:fe60:cc5b/64 Scope:Link ~$ /sbin/route -A inet6 | grep wlan0 fe80::/64 :: U 256 0 0 wlan0 ff00::/8 :: U 256 0 0 wlan0 ~$ cat /etc/resolv.conf inet6 nameserver 2620:0:ccc::2 nameserver 208.67.222.222 nameserver 208.67.220.220 But still, with ping6 I can only ping localhost (::1). Everything else is unreachable. Normal ping works fine. That is why I was asking if I am obliged to use a tunnel.

  Read the article

• package manager cannot create users? installation script fails?

  - by RapidWebs

  It seems that when trying to install any package which requires the creation of a system User and Group, the installer fails with the error: install: invalid user 'username' When it happened the first time, I assumed it was related to the package, or it's installation script. But now I am attempting a different package, and alas, the same issue arises! note: /etc/passwd and /etc/group is not chattr -i Here is the example output from an attempted installation (of varnish): Selecting previously unselected package varnish. Unpacking varnish (from .../varnish_3.0.2-1ubuntu0.1_amd64.deb) ... Processing triggers for man-db ... Setting up libvarnishapi1 (3.0.2-1ubuntu0.1) ... Setting up varnish (3.0.2-1ubuntu0.1) ... install: invalid user `varnish' dpkg: error processing varnish (--configure): subprocess installed post-installation script returned error exit status 1 Processing triggers for libc-bin ... ldconfig deferred processing now taking place Errors were encountered while processing: varnish note: running ubuntu 12.04 For now, I have resolved the issue by manually creating the users, and running apt-get install -f, but this does not resolve the actual issue. Any ideas?

  Read the article

• phpMyadmin issue on cpanel

  - by user1149244

  I logged in into our cpanel to view phpMyAdmin but I can't open it. It give me this error message: Warning: session_write_close() [function.session-write-close]: write failed: No space left on device (28) in /usr/local/cpanel/base/3rdparty/phpMyAdmin/index.php on line 42 Warning: session_write_close() [function.session-write-close]: Failed to write session data (files). Please verify that the current setting of session.save_path is correct (/var/cpanel/userhomes/cpanelphpmyadmin/sessions) in /usr/local/cpanel/base/3rdparty/phpMyAdmin/index.php on line 42 Warning: Cannot modify header information - headers already sent by (output started at /usr/local/cpanel/base/3rdparty/phpMyAdmin/index.php:42) in /usr/local/cpanel/base/3rdparty/phpMyAdmin/index.php on line 99 I contacted the support to assist me with. They just told me that the server is unmanaged. They told me to delete the free the partition but I don't know how to do it. I'm noob on that matter. The /var/log/btmp is over 8GB as they said. I want to delete that file. How would I do this? I need to free the space of the partition. I need some steps on how to do it and also steps on how to delete the /var/log/btmp. I have been googling around but I haven't found anything.

  Read the article

• Amazon EC2 - Free memory

  - by Damo

  We have an amazon ec2 small instance running and over the past few days we noticed that the memory is going down and down. On the small instance, we are running apache and tomcat6 Tomcat is started with the following JVM parameters -Xms32m -Xmx128m -XX:PermSize=128m -XX:MaxPermSize=256m We use nagios to monitor stuff like updates to apply, free disk space and memory. Everything else is behaving as expected but our memory is going down all the time. Our app receives approx half a million hits a day When I shutdown apache and tomcat, and ran free -m, we had only 594mb of memory free out out of the 1.7gb of memory. Not much else is running on the small instance and when running the top command I cannot see where the memory is going. The app we run on tomcat is a grails webapp. Could there be a possibility that there is a memory leak within our application? I read online and folks say that a small amazon instance is perfect for running apach and tomcat. I found a few posts online that showed how to setup apache and tomcat to limit the memory usage and I have already performed those steps. The memory is not being used up as quick but the memory is still decreasing over time. We have other amazone ec2 small instances running grails apps and the memory is fairly standard on those nodes. But they would not be receiving as much traffic Just to add, when I run the top command on the problem server, I cannot see where all the memory is being used Any help with this is greatly appreciated The output of free -m when run on my server is as follows total used free shared buffers cached Mem: 1657 1380 277 0 158 773 -/+ buffers/cache: 447 1209 Swap: 895 0 895 In your opinion, does this look ok? At what stage would the OS give back memory, would it wait to the memory reaches 0% or is this OS dependent?

  Read the article

• Server load increases by lot of httpd request with same PID

  - by user3740955

  I can see that my server load increases to more than 200-300 range. Before 1 week the maximum load was around 20-25. In top and ps -ef i can see a lot of httpd threads and the PPID of most of the httpd request are of the same PID. When i verified this the parent process ID is of root. Please let me know how i can reduce the server load. I have searched a lot for this but not able to find out a proper solution for this. Please let me know. Please see below a part of the top output. apache 29698 2062 1 16:54 ? 00:00:00 /usr/sbin/httpd apache 29700 2062 3 16:54 ? 00:00:00 /usr/sbin/httpd apache 29701 2062 10 16:54 ? 00:00:02 /usr/sbin/httpd apache 29702 2062 0 16:54 ? 00:00:00 /usr/sbin/httpd apache 29703 2062 1 16:54 ? 00:00:00 /usr/sbin/httpd apache 29705 2062 0 16:54 ? 00:00:00 /usr/sbin/httpd apache 29706 2062 3 16:54 ? 00:00:00 /usr/sbin/httpd apache 29707 2062 0 16:54 ? 00:00:00 /usr/sbin/httpd apache 29708 2062 1 16:54 ? 00:00:00 /usr/sbin/httpd apache 29709 2062 0 16:54 ? 00:00:00 /usr/sbin/httpd apache 29710 2062 0 16:54 ? 00:00:00 /usr/sbin/httpd apache 29711 2062 0 16:54 ? 00:00:00 /usr/sbin/httpd apache 29712 2062 0 16:54 ? 00:00:00 /usr/sbin/httpd Server version: Apache/2.2.3

  Read the article

• Looking for a powershell script that can pull a file from a set of PC's and FTP

  - by DangeRuss

  I'm looking to write a script (preferably powershell) that will essentially copy a file from a bunch of PC's and FTP it to a server. So the structure of the environment is that we have a file on multiple PC's (around 50 or so) that need to placed on a server. Sometimes one of the PC's may be turned off so the script would first need to ensure the PC is up and running (maybe a ping result), then it would need to go into a directory on that PC, pull a file off of it, rename the file, place into a source directory, then remove the file. Naming convention doesn't matter, but date/time stamp would be easiest. Ideally, it would be best to first move all the files to a source directory to save on FTP bandwidth, but since the files will be named the same, the files must be renamed during the move process. Move not copy because the directory needs to be empty so the file can be re-created the next day. So once moved to the source directory, now all the files need to be FTP'd to a server for processing. After all of this, we need to know which PC's on the list did not respond so we can manually retrieve the file so the script should output a file (txt is fine) that will show which PC's were offline. Everything is one domain and script will be run from an server with admin creds. Thank you!

  Read the article

• Can I use Upstart to start a script which requires the user's X session?

  - by ledneb

  I wrote a script which greps through the output of synclient to determine whether a laptop's touchpad has miraculously turned itself off (Ubuntu seems to /love/ doing this recently) and, if so, turns it back on. The script is something like this: #!/bin/bash while true ; do if [ `synclient | grep -e"TouchpadOff[\s]*1" | wc -l` -ge 1 ] ; then synclient TouchpadOff=0 fi sleep(3) done (I don't have the laptop to hand right now but you get the point! I will update later when I'm at my laptop if that's incorrect) So I tried running this as an upstart script so my touchpad can heal itself without any interaction. But it seems synclient doesn't find the current user's X session when my script is upstart'ed. I tried running it by using something like su -c myscript.sh ledneb in my script stanza, but to no avail. Should I be looking in the direction of /etc/X11/xinit/xinitrc rather than upstart? Is there a proper way to have this script run in the context of the current (or even a hard-coded) user's x session?

  Read the article

• Why would the Apache parent process restart silently?

  - by miracle

  I run apache 2.2.9 with mpm prefork on debian lenny. Following http://httpd.apache.org/docs/2.2/mod/prefork.html, I would expect that there is one parent process, running as root and listening as configured, which would start child processes as defined by the Min/Max/etc. directives. I expect the children to be restarted as per MaxRequestsPerChild, but the parent process to stay put with one process id until I restart it manually. Out of a little paranoia, I started monitoring listening ports including process ids. I have a cron job every 20 minutes to run netstat -ap | grep LISTEN and diff the output. Sometimes (about once per day) I see a series of this: 8c8 < tcp6 0 0 [::]:www [::]:* LISTEN 6194/apache2 --- tcp6 0 0 [::]:www [::]:* LISTEN 6607/apache2 10c10 < tcp6 0 0 [::]:https [::]:* LISTEN 6194/apache2 --- tcp6 0 0 [::]:https [::]:* LISTEN 6607/apache2 Over a period of an hour or three, the parent would change its pid at least once every 20 minutes, without any explanation in the log files or any other hint that anything is going wrong. This is not what I expected. What am I missing?

  Read the article

• SSL configuration issue. SSL/IIS7 not loading all scripts/CSS on user's first visit

  - by Chris

  Hi all, Hopefully this isnt a tricky one. I've got a web app that doesn't load all javascript/css/images on the first visit. Second visit is fine. After approximately 2 minutes of inactivity the problem reoccurs. These problems only started occuring after the customer requested SSL be applied to the application. Ajax requests stop working after 2 minutes of activity despite a successful page load of all javascript elements. Application timeout is 30 minutes - like I said, everything was fine before SSL was applied. All javascript and CSS files use absolute URLS - e.g https://blablabla There appears to be no pattern as to why certain files arent loaded. The firebug Net output shows the status for the failed elements as 'Aborted'. For example, site.css and nav.css are in the same folder, are declared after each other in the head tag yet one is loaded and the other is not. Both will load fine after refreshing the page (unless roughly two minutes have passed). An Ajax request also shows as aborted after two minutes. However, if i do the request again the Ajax request will succeed. Almost as if the first request woke something up. None of these problems occur in Chrome Any ideas? FYI this is a .Net 4 C# MVC app running under IIS7 but I'm not sure its relevant since it works in Chrome. Everything worked fine before SSL was applied. Originally posted on stackoverflow but recommended to list here. Can provide additional details if necessary.

  Read the article

• Install KVM based Windows 2008 remotely over SSH on a headless, no graphics Ubuntu 10.04 server?

  - by taazaa

  Hi, I have a Dell server at a remote data center with Ubuntu 10.04 as the host. It is a minimal install with the necessary virtulization packages. There is no X and the machine is headless. I have the win2008 DVD in the machine and want to remotely install it. I tried: virt-install --connect qemu:///system -n vmwin2k8 -r 1024 --disk path=server2k8.qcow2,size=50 --cdrom /dev/sr0 --vnc --noautoconsole --os-type windows --os-variant win2k8 The qcow2 image get created However I don't understand how to connect to see the install via VNC. This is my first time doing it so it may be trivial or may not be possible. Remotely I have a Win 7 machine with Putty and RealVNC viewer. Where is the graphic output of VNC going? Do I have to have VNC server running on the host or some other machine and then connect to it from my VNC client? Please let me know or point me to the right direction. I have been searching the web for several days to figure out how this is suppose to work. Thanks!

  Read the article

• Linux can dual display but windows can't?

  - by Mr_CryptoPrime

  I have two monitors, one that is hdmi-to-dvi and the other vga-to-dvi. I have an AMD HD Radeon 6900 series graphics card installed. I got Ubuntu to display dual monitors, but then I restarted for an update and then Ubuntu wouldn't even boot in recovery mode, it just kept cycling forever...displaying something about "timeout: killing [filepath] [hexadecimal]. So I tried booting into windows (7-professional) and it crashed and displayed this after rebooting: IRQL_NOT_LESS_OR_EQUAL, PAGE_FAULT-IN-NONPAGED-AREA. I went into Bios and reverted to the system defaults and ran system restore and it booted ok, but the dvi-to-dvi monitor would not display. I made sure my drivers were updated and catalyst was updated. Also through research discovered only one is for vga and the other is digital only, so I put the vga-to-dvi in the vga slot and so on. Neither windows or catalyst will detect the dvi-to-dvi montior. Any suggestions? Thanks. EDIT: Found out that booting into Ubuntu with only one monitor (using either monitor with either cable) worked perfectly fine. I could then add another monitor and it displays ok. However, it will, out of the blue, suddenly distort the display. At first I thought the computer crashed, but it is something with the video output from the GPU to the monitor because I pushed the power button and it would refresh every 5secs or so and I could see the "Ubuntu will power down in X seconds", even though it was horribly distorted. Any ideas what's causing this?

  Read the article

• Hard Reset USB in Ubuntu 10.04

  - by Cory

  I have a USB device (a modem) that is really finicky. Sometimes it works fine, but other times it refuses to connect. The only solution I have found to fix it once it gets into a bad state is to physically unplug the device and plug it back in. However, I don't always have physical access to the machine it is plugged in on, so I'm looking for a way to do this through the command line. This post suggests running: $ sudo modprobe -w -r usb_storage; sudo modprobe usb_storage However I get an "unknown option -w" output. This slightly modified command: $ sudo modprobe -r usb_storage Fails with the message FATAL: Module usb_storage is in use. If I try to kill -9 the processes marked [usb-storage] before running they refuse to die (I think because they are deeply tied to the kernel). Anyone know of a way to do this? NOTE: I cross-posted this on serverfault as I didn't know which was more appropriate. I will delete and/or link whichever one is answered first.

  Read the article

• Configuring iptables rules for HAProxy and others

  - by MLister

  I have the following relevant settings for HAProxy: defaults log global mode http option httplog option dontlognull retries 3 option redispatch maxconn 500 contimeout 5s clitimeout 15s srvtimeout 15s frontend public bind *:80 option http-server-close option http-pretend-keepalive option forwardfor # ACLs ... I have three backends (including a Nginx server) configured in HAProxy, all listening on different ports of 127.0.0.1. And my iptables config is this: *filter # Allows all loopback (lo0) traffic and drop all traffic to 127/8 that doesn't use lo0 -A INPUT -i lo -j ACCEPT -A INPUT -i lo -d 127.0.0.0/8 -j REJECT # Accepts all established inbound connections -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT # Allows all outbound traffic # You can modify this to only allow certain traffic -A OUTPUT -j ACCEPT # Allows HTTP and HTTPS connections from anywhere (the normal ports for websites) -A INPUT -p tcp --dport 80 -j ACCEPT -A INPUT -p tcp --dport 443 -j ACCEPT # Allows SSH connections # # THE -dport NUMBER IS THE SAME ONE YOU SET UP IN THE SSHD_CONFIG FILE # -A INPUT -p tcp -m state --state NEW --dport 22 -j ACCEPT # Allow ping -A INPUT -p icmp -m icmp --icmp-type 8 -j ACCEPT # log iptables denied calls -A INPUT -m limit --limit 5/min -j LOG --log-prefix "iptables denied: " --log-level 7 # Reject all other inbound - default deny unless explicitly allowed policy -A INPUT -j REJECT -A FORWARD -j REJECT COMMIT My questions are: Would the above iptables config work with the settings/options in my HAProxy config? I am also runnning a postgres and a redis server on the same machine, what settings do I need to adjust for these two to enable them work with iptables?

  Read the article

• What Logs / Process Stats to monitor on a Ubuntu FTP server?

  - by Adam Salkin

  I am administering a server with Ubuntu Server which is running pureFTP. So far all is well, but I would like to know what I should be monitoring so that I can spot any potential stability and security issues. I'm not looking for sophisticated software, more an idea of what logs and process statistics are most useful for checking on the health of the system. I'm thinking that I can look at various parameters output from the "ps" command and compare to see if I have things like memory leaks. But I would like to know what experienced admins do. Also, how do I do a disk check so that when I reboot, I don't get a message saying something like "disk not checked for x days, forcing check" which delays the reboot? I assume there is command that I can run as a cron job late at night. How often should it be run? What things should I be looking at to spot intrusion attempts? The only shell access is SSH on a non-standard port through UFW firewall, and I regularly do a grep on auth.log for "Fail" or "Invalid". Is there anything else I should look at? I was logging the firewall (UFW) but I have very few open ports (FTP and SSH on a non standard port) so looking at lists of IP's that have been blocked did not seem useful. Many thanks

  Read the article

• Passive mode FTP file download hangs from specific machine

  - by chiptuned

  I have a server which is an AWS instance that just cannot download files from a specific FTP server. I can connect to the FTP server fine and run some commands, but when I request a file it just hangs. Here is the debug output of the base linux ftp client after login: ---> SYST 215 UNIX Type: Apache FtpServer Remote system type is UNIX. ftp> get outgoing/catalog.gz catalog.gz local: catalog.gz remote: outgoing/catalog.gz ---> PASV 227 Entering Passive Mode (64,156,167,125,135,191) ---> RETR outgoing/catalog.gz 150 File status okay; about to open data connection. Thats it. Then it just sits there and nothing transfers. I have verified that a data connection is made but the client gets no data. ? ss -nt dst 64.156.167.125 State Recv-Q Send-Q Local Address:Port Peer Address:Port ESTAB 0 0 10.185.147.150:41190 64.156.167.125:21 ESTAB 0 0 10.185.147.150:48871 64.156.167.125:48557 The FTP server is not in my control and downloads from other FTP servers in passive mode have worked. Active mode does not work as the system is behind a firewall. Every FTP client I've tried has the same problem. The download works from other systems, even from other AWS instances I have with the same Security Group. Not necessarily the same distro or config though. I understand it may be some issue on the server side, but I want to know what it is about my particular machine where the transfer hangs and where on every other machine I can get my hands on, it works. Please let me know what the culprit on the client side could be or ideas on what else to look at.

  Read the article

• How to block access to addresses outside network (internet)

  - by devnull

  I have a homeserver, that is now connected to the internet with an own network device (ath0 - 192.168.1.x). It also has one more network interface (eth0 - 192.168.0.x). Soon I will get a second internet line that will be connected the second network. The server then has both networks with different internet lines available, but i only want it to connect to the internet on the old ath0 interface - not the new eth0 (192.168.0.x). Background of that constellation is that the new line has a volume-limit in traffic - the old hasn't and i need the new line for all mobile devices and laptops. The devices should be able to use the new network to connect to the internet and the server. The homeserver is a debian 6 with iptables and some already written rules for it. I need now a rule to block all outgoing internet access on the eth0 interface - i guess it could be something with --target != 192.168.0.0 but i did not succeed in finding the proper solution. Edit: found the solution: iptables -A OUTPUT -o eth0 -d 192.168.0.0/24 -m state --state NEW,ESTABLISHED -j ACCEPT With that setting, all traffic that uses the eth0 interface is only allowed if the destination is inside the network 192.168.0.x - all other traffic is denied .

  Read the article

• Fedora 17 transparent Ethernet Bridge not forwarding IP traffic

  - by mcdoomington

  I am running on Fedora 17 with the latest ebtables and have been trying to setup a transparent bridge - using the following script, I send a ping through the bridged host and only see the requests on the bridge (among other traffic from eth0), BUT, arps and arp replies are making it through. My host is setup - Client 192.168.1.10 <-- eth0 -- eth2 192.168.1.20 Ethernet script: #!/bin/sh brctl addbr br0; brctl stp br0 on; brctl addif br0 eth0; brctl addif br0 eth2; (ifdown eth0 1>/dev/null 2>&1;); (ifdown eth2 1>/dev/null 2>&1;); ifconfig eth0 0.0.0.0 up; ifconfig eth2 0.0.0.0 up; echo "1" > /proc/sys/net/ipv4/ip_forward; ebtables -P INPUT DROP ebtables -P FORWARD DROP ebtables -P OUTPUT DROP ebtables -A FORWARD -p ipv4 -j ACCEPT ebtables -A FORWARD -p arp -j ACCEPT Any assistance would be great!

  Read the article

< Previous Page | 598 599 600 601 602 603 604 605 606 607 608 609  | Next Page >