Search Results

Search found 64639 results on 2586 pages for 'work stealing'.

Page 597/2586 | < Previous Page | 593 594 595 596 597 598 599 600 601 602 603 604  | Next Page >

• Attempts at NIC teaming on Server 2008 R2 with PRO/1000 MT

  - by Klaus

  I have a Dell PowerEdge 1850 server and a gigabit switch that supports nic teaming (and was configured to do so). The server has a total of four Intel PRO/1000 MT ports, which also support teaming. But.. for some reason Intel does not actually have a version of the drivers/ProSet that will work for these cards on 2008 R2. You have to use the built-in drivers that come with 2008 R2, which do not support the additional features. According to their website, they have no plans to change this. Strangely enough, I experimented with various drivers in an attempt to force it to work. At one point, the teaming was working, but there were side effects (such as the DNS server refusing to start). So now I am back to running just one of the cards, (very) frustrated about the whole situation. I have looked all over to see if there is some way around this, but have not had any success. I know I can probably just get a new network adapter for it, but with the good deal I got, that would cost more than the server! :) While staying with 2008 R2, does anyone know of any possible alternatives? Thanks!

  Read the article

• VMware Workstation update stopped autofit guest working

  - by u8sand

  VMware one day offered an update (8.0.1 build-528992 my current version) from 8.0. I accepted it, because updates usually fix problems. However not in this case... Previously it worked very well. Now, it still "works" but the one glitch I'm getting makes it too hard to deal with. This screenshot will explain my problem: As you can see, my virtual PC is not resizing correctly. (This happens with any operating system), autofit guest just doesn't work - it only results in things like this happening. Thanks to the tools it becomes very hard to NOT autofit guest. I've tried uninstalling 8.0.1 completely and installing 8.0 again but with the same results. I don't really understand what the new update has done to VMware Workstation or to my virtual machines. I do believe this isn't VMware Workstation's direct fault but from VMware Tools, which would explain why going back to 8.0 didn't work since VMware tools has its own updates. How can I fix this? The host is running Windows 7 Ultimate 64-bit.

  Read the article

• Dependency issue installing PostGIS on CentOs 6.3

  - by Nyxynyx

  I am new to linux and is trying to install PostGIS2 after successfully installing PostgreSQL 9.1. The machine is running CentOS 6.3 and has cPanel installed. Problem: When I tried installing PostGIS using yum: yum install postgis2_91 postgis2_91-utils, I get the dependency error below. How should I solve this dependency problem and install PostGIS? Thank you so much! --> Finished Dependency Resolution Error: Package: postgis2_91-utils-2.0.1-1.rhel6.i686 (pgdg91) Requires: perl-DBD-Pg Error: Package: gdal-1.7.2-1.el6.i686 (pgdg91) Requires: libdapserver.so.7 Error: Package: gdal-1.7.2-1.el6.i686 (pgdg91) Requires: libdap.so.11 Error: Package: gdal-1.7.2-1.el6.i686 (pgdg91) Requires: libgeotiff.so.1.2 Error: Package: gdal-1.7.2-1.el6.i686 (pgdg91) Requires: libnetcdf.so.6 Error: Package: gdal-1.7.2-1.el6.i686 (pgdg91) Requires: libdapclient.so.3 Error: Package: gdal-1.7.2-1.el6.i686 (pgdg91) Requires: libhdf5.so.6 Error: Package: gdal-1.7.2-1.el6.i686 (pgdg91) Requires: librx.so.0 Error: Package: gdal-1.7.2-1.el6.i686 (pgdg91) Requires: libogdi.so.3 Error: Package: gdal-1.7.2-1.el6.i686 (pgdg91) Requires: libcfitsio.so.0 You could try using --skip-broken to work around the problem ** Found 6 pre-existing rpmdb problem(s), 'yum check' output follows: bandmin-1.6.1-5.noarch has missing requires of perl(bandmin.conf) bandmin-1.6.1-5.noarch has missing requires of perl(bmversion.pl) bandmin-1.6.1-5.noarch has missing requires of perl(services.conf) exim-4.77-1.i386 has missing requires of perl(SafeFile) frontpage-2002-SR1.2.i386 has missing requires of libexpat.so.0 sendmail-cf-8.14.4-8.el6.noarch has missing requires of sendmail = ('0', '8.14.4', '8.el6') Update An error still remains: Error: Package: postgis2_91-utils-2.0.1-1.rhel6.i686 (pgdg91) Requires: perl-DBD-Pg You could try using --skip-broken to work around the problem ** Found 6 pre-existing rpmdb problem(s), 'yum check' output follows: bandmin-1.6.1-5.noarch has missing requires of perl(bandmin.conf) bandmin-1.6.1-5.noarch has missing requires of perl(bmversion.pl) bandmin-1.6.1-5.noarch has missing requires of perl(services.conf) exim-4.77-1.i386 has missing requires of perl(SafeFile) frontpage-2002-SR1.2.i386 has missing requires of libexpat.so.0 sendmail-cf-8.14.4-8.el6.noarch has missing requires of sendmail = ('0', '8.14.4', '8.el6')

  Read the article

• Mail.app doesn't detect sender in Address Book

  - by CoreSandello

  Hi there. I don't understand, how does 'smart addresses' in Mail.app work. Recently I mentioned, that for some emails I don't see person's full name in 'From' column. I started to dig into this behavior and found out, that I have few contacts in my Address Book, that are not recognized by Mail.app. Here how it looks: I have a person in Address Book with filled email entry and filled first/last name (localized). I have an incoming email from that person (from email specified in Address Book), but first/last name in the email itself doesn't match with ones specified in Address Book (e. g. 'From' field in email looks like 'John [work] <[email protected]>' while Address Book entry is 'John Smith' (localized, in Russian)). And Mail.app doesn't recognize that this mail is originating from that person in Address Book: if I click on 'From' field, it suggests to me to add sender to Address Book, while for others' emails I have 'Show in Address Book' menu entry (especially for ones with full localized name in 'From' field). I'm wondering, is that behavior correct or I'm missing something? I'm using Snow Leopard & Mail 4.0; my system language set to English, if that matters. I'd like to have some clarifications on that Mail.app behavior: whenever it fixable or not (and if it's fixable, I'd like to see a fix). By the way, is it possible to match sender's address against Address Book entry in filter rules or not? That would be great, if I can create rules like 'move all mail from that person to that folder' without specifying exact source address. Thanks, Ivan.

  Read the article

• Install Ubuntu 10.10 from loopback mounted ISO image

  - by Zifre

  I have a laptop with a faulty BIOS that has stopped booting from CDs even though it supports it (and it doesn't support booting from USB drives). I am trying to install Ubuntu 10.10 on it. I already had 9.10 installed. I tried using Kexec, but it refused to accept the kernel image. Eventually I found this page which shows how to make GRUB 2 boot from an ISO file. That worked fine, and I am now running the live image from the file. (If I can get this to work, it will be my new preferred way of installing Ubuntu, as it saves CDs and boots much faster.) However, I can't install it. The installer won't make changes to the hard drive, because the partition containing the ISO is mounted (and can't be unmounted because it is in use). Even if I only choose to use other partitions that are not mounted, the installer refuses to go any farther. Clearly, it should be possible using other partitions on the same disk. Is there any way to work around this issue or force the installer to go ahead?

  Read the article

• Video card not detected on Lenovo T410 in Linux

  - by wich

  I have a T410 with an nVidia NVS 3100M, this is not a hybrid system, there is no Optimus. (No option in the BIOS for Optimus, lspci in linux as well as the Windows device manager only show the nVidia) Using lspci I see the GPU as a present device, however, I can not, for the life of me, get any video driver to work that will let me start an X session, every time X craps out with the error (EE) No devices detected. I have tried the nVidia binary blob, (with nvidia-config, made sure no nvidia support in the kernel), I have tried nouveau, I have tried nv, I have even tried generic vesa, nothing will work. When I compare the dmesg that I get when loading the nvidia kernel module, I see that it is missing some lines compared with another system that also has an nvidia card, specifically the line mentioning the GPU name (3100M) is not there. I have checked every option in the BIOS, there is nothing to control except for the BIOS video output port, which is set to the LCD panel. I have no idea anymore what the problem may be, or even how I can diagnose this problem further. Any help will be appreciated.

  Read the article

• How often is CRL refreshed, and how to force it to be?

  - by lockstock

  I have a web service running under IIS 7 that requires an X509 client certificate. I know that the server that it rus on needs access to DigiCert.com in order to be able to get the CRL (Certificate Revocation List). There is a need to change our proxy so I am attempting to investigate the impact of doing so. I have removed the global proxy settings using the command netsh winhttp proxy refesh, and also deleted the CRL cache using the command certutil -URLcache CRL delete. However, after doing this, all calls to the web service still succeed. This suggests to me that I am missing something here. So; If the CRL cache is cleared and the server has no way of refreshing the CRL, why do web service requets not return http 403?. I have been unable to find adequate information from googling nor from my colleagues. The reason I want it to fail is that I will not be confident that the new proxy settings work until I can see it broken first, if that makes sense. I would also like to be able to force the CRL to be refeshed in order to ensure that the new proxy settings work

  Read the article

• Intermittent "Lost connection to MySQL server at 'reading initial communication packet'"

  - by db2

  Our web environment consists of two servers. Web front-end. Dell PowerEdge R610, RHEL 5.5, Apache 2.2.17, php 5.2.14. Database server. Dell PowerEdge R710, Windows 2008 R2 Standard x64, MySQL 5.5.11-log x64. Normally these two work perfectly fine together. However, when I try to get them talking via a dedicated LAN on their secondary NICs (each machine has four of them), things get flaky. I have NIC #2 on both machines configured on the 172.16.1.0/24 subnet, with no gateway or DNS servers (obviously, since it's just those two systems), and I put the private IP address of each machine into the hosts file of the other. The routing tables on both machines look okay after I do this. I've tried this with both a crossover cable draped directly between the two NICs, and also via a dedicated vlan on the switch in the rack. In either case, I get intermittent connection problems. It's a fairly small percentage of connections that fail, but it's enough to cause a significant problem, and I have to switch back to the main network connection, which will contend with all the other traffic and hosts on the switch. The full error message that appears in the application log: SQLSTATE[HY000] [2013] Lost connection to MySQL server at 'reading initial communication packet', system error: 110 Am I doing something really dumb that's causing this to not work properly? Anything I can check in MySQL that would explain why it's failing to connect occasionally?

  Read the article

• Is my HDD dead forever?

  - by Roberto

  Yesterday I turned on my computer and it couldn't boot. I found out the hd (320GB SATA Seagate Momentus 7200.3 for notebook) was broken and it couldn't be recognized by the BIOS. I have another of the same hard drive, so I exchanged the boards. I found out that there is a problem on its board since my good hard drive didn't work. But the broken hard drive doesn't work with the good board as well: it can be recognized but when I insert a Windows Instalation DVD it says the hard drive is 0GB. I put it in a case and use it in another computer via USB, and but it doesn't show up in the "My Computer". I used a software to recover files called "GetDataBack for NTFS", it recognized the hard drive but with the wrong size (2TB). I try to make it read the hard drive but it got an I/O error reading sector. It tries to read, the hard drive spins up. So, since I'm using a good board on it, the problem seems to be internal. Is there anything someone could do to recover the files from it?

  Read the article

• Apache2 on Raspbian: Multiviews is enabled but not working [closed]

  - by Christian L

  I recently moved webserver, from a ubuntuserver set up by my brother (I have sudo) to a rasbianserver set up by my self. On the other server multiviews worked out of the box, but on the raspbian it does not seem to work althoug it seems to be enabled out of the box there as well. What I am trying to do is to get it to find my.doma.in/mobile.php when I enter my.doma.in/mobile in the adress field. I am using the same available-site-file as I did before, the file looks as this: <VirtualHost *:80> ServerName my.doma.in ServerAdmin [email protected] DocumentRoot /home/christian/www/do <Directory /> Options FollowSymLinks AllowOverride All </Directory> <Directory /home/christian/www/do> Options Indexes FollowSymLinks MultiViews AllowOverride All Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog ${APACHE_LOG_DIR}/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog ${APACHE_LOG_DIR}/access.log combined Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> From what I have read various places while googling this issue I found that the negotiation module had to be enabled so I tried to enable it. sudo a2enmod negotiation Giving me this result Module negotiation already enabled I have read through the /etc/apache2/apache2.conf and I did not find anything in particular that seemed to be helping me there, but please do ask if you think I should post it. Any ideas on how to solve this through getting Multiviews to work?

  Read the article

• Executing Oracle SQLPlus in a Powershell Invoke-Command statement against a remote machine

  - by Scott Muc

  We have a basic powershell script that attempts to execute SQLPlus.exe on a remote machine. The remote does not have Oracle Instant client installed, but we have bundled all the necesary dlls in a remote folder. For example we have sqlplus.exe and dependencies in the directory C:\temp\oracle. If I navigate to that path on the remote server and execute sqlplus.exe it runs just fine. I get the prompt for username. If I go: Invoke-Command -comp remote.machine.host -ScriptBlock { C:\temp\oracle\sqplus.exe } I get the following: Error 57 initializing SQL*Plus + CategoryInfo : NotSpecified: (Error 57 initializing SQL*Plus:String) [], RemoteException + FullyQualifiedErrorId : NativeCommandError Error loading message shared library Thinking that it's potentially a PATH issue I tried the following: Invoke-Command -comp remote.machine.host -ScriptBlock { $env:ORACLE_HOME= "C:\temp\oracle"; $env:PATH = "$env:ORACLE_HOME; C:\temp\oracle\sqlplus.exe } This had the same result. The error code is not very helpful and is extremely frustrating since it does work when I log on to the machine. What is powershell remoting doing that's making this not work?

  Read the article

• Change the default program for a filetype to something not in "Program Files" in Windows Vista

  - by Carson Myers

  I'm trying to make my python scripts run in python 2.6 by default when run from the command line. This is paired with adding certain scripts to the PATH variable and .py to PATHEXT for convenience. But I'll be damned if I can get the file type association to work. In the default programs dialog (found in control panel) I find .py, and click "Change Program." This gives me the same dialog as clicking "Open with..." on a file's context menu. I search for python. Tell it to use python, but it doesn't add it to the list of programs I am allowed to use. I tried making a shortcut to python in Program Files, but that won't work either. If I copy python into a folder in Program Files, then that works. But why can't I just point it at C:\python26\python.exe (which is in the PATH variable) in the first place? Is there a way around this, or do I have to just reinstall python into Program Files?

  Read the article

• Choosing the right TV tuner - USB or PCI TV tuners, hardware/software, DVB? Hybrid/combo/analog?

  - by Nucleon

  Greetings, I'll start with some background information so you know what I'm trying to accomplish and then get to my question. I work at a Television station in the US and we are working on setting up an online DVR/Podcast system for all of our newscasts. So basically we would be recording every newscast in HD, encoding it to flv/h.264 for viewing in a browser on flash compatible and iphone/ipad devices, eventually migrating to WebM when it's browser compliant. This task is theoretically pretty simple as it all it involves is a TV tuner device and a program like VLC, MythTV or whatever to schedule and dump it to a file, encode it with VLC/FFMPEG and push it to the streaming server. Now to the hardware, in order to accomplish that task, should I use an internal PCI tuner or a USB 2.0 tuner? Is there a difference? The bus speeds of both are not too far apart, and is the bus speed really relevant in this case? Does it matter if the device has a hardware encoder or a software encoder? On many sites the USB was recommended for ease of set up and use, but would it overly task a processor, or is that not a concern as long as it's a decent PC (at least duo core, 6gb ram). What's the difference between the stick USB and the Box USBs? To my understanding analog is basically gone in the US, so we would want a hybrid or combo tuner correct? How do those differ from DVB? Are there any other features or concepts which I am missing which may influence the recommended product. It would be ideal if the device which could work in both Linux and a Windows environment, to my knowledge most Hauppauge are? Example 1: PCI Hauppage http://www.newegg.com/Product/Product.aspx?Item=N82E16815116033 Example 2: USB 2.0 Box http://www.newegg.com/Product/Product.aspx?Item=N82E16815116029 Example 3: USB 2.0 Stick http://www.newegg.com/Product/Product.aspx?Item=N82E16815116031 Any guidance from the Superusers would be much appreciated!

  Read the article

• Performance of Virtual machines on very low end machines

  - by TheLQ

  I am managing a few cheap servers as my user base isn't large enough to get much more powerful servers. I also don't have the money lying around to invest in a server to prepare for the larger user base. So I'm stuck with the old hardware I have. I am toying with the idea of virtualizing all the current OS's with most likely VMware vSphere Hypervisor (AKA ESXi) Xen (ESXi has too strict of an HCL, and my hardware is too old). Big reasons for doing so: Ability to upgrade and scale hardware rapidly - This is most likely what I'll be doing as I distribute services, get a bigger server, centralize (electricity bills are horrible), distribute, get a bigger server, etc... Manually doing this by reinstalling the entire OS would be a big pain Safety from me - I've made many rookie mistakes, like doing lots of risky work on a vital production server. With a VM I can just backup the state, work on my machine, test, and revert if necessary. No worries, and no OS reinstallation Safety from other factors - As I scale servers might go down, and a backup VM can instantly be started. Various other reasons. However the limiting factor here is hardware. And I mean very depressing hardware. The current server's run off of a Pentium 3 and 4, and have 512 MB and 768 MB RAM respectively (RAM can be upgraded soon however). Is the Virtualization layer small enough to run itself and a Linux OS effectively? Will performance be acceptable (50% CPU overhead for every operation isn't acceptable)? Does it leave enough RAM for the Linux OS? Is this even feasible?

  Read the article

• Kickstart installation from USB -- Kickstart location

  - by dooffas

  After managing to get a Fedora ISO to rebuild successfully (for a USB stick) after adding a kickstart file (http://serverfault.com/questions/548405/), I now have an issue with locating the kickstart file on the USB media. When this is done from a CDROM you can simply kickckstart by adding this parameter to boot: linux ks=cdrom This will kickstart (providing the kickstart file is named ks.cfg and is in the root of the disk). Now, obviously this will be different for the USB drive, so from my research, I assumed that this line would do the job: linux ks=hd:sdb1:/ks.cfg Evidently this does not work. I get an error informing me this drive is already mounted and cannot be remounted. EDIT: Actual error message: mount: /dev/sdb1 is already mounted or /run/install/tmpmnt0 busy Warning: Can't get kickstart from /dev/sdb1:/ks.cfg To test that the syntax was correct I placed the kickstart file on another USB stick and loaded the same command to grab ks.cfg from the new location: linux ks=hd:sdc1:/ks.cfg This does work (providing USB sticks are mounted in order, boot - sdb1, kickstart - sdc1). The install will kickstart and complete the install with no issue. Obviously having to use 2 pen drives is somewhat frustrating and unreliable. Is there a way around this?

  Read the article

• Lock down Wiki access to password only but remain open to a subnet via .htaccess

  - by Treffynnon

  Basically we have a Wiki that has some sensitive information stored in it - not the best I know but my predecessor set it up. I want to be able to request password access from any one who is not on the local network subnet. Those on the local subnet should be able to proceed without entering a password. The following .htaccess does not seem to work any more as it is letting non-local access without requiring the password: AuthName "Our Wiki" AuthType Basic AuthUserFile /path/to/passwd/file AuthGroupFile /dev/null Require valid-user Allow from 192.168 Satisfy Any order deny,allow And I cannot work out why. The WikkaWiki it is supposed to be protecting was recently upgraded, which clobbered the .htaccess file so I restored the above from memory/googling. Maybe I am missing an important directive? The full .htaccess is as follows: AuthName "Our Wiki" AuthType Basic AuthUserFile /path/to/passwd/file AuthGroupFile /dev/null Require valid-user Allow from 192.168 Satisfy Any SetEnvIfNoCase Referer ".*($LIST_OF_ADULT_WORDS).*" BadReferrer order deny,allow deny from env=BadReferrer <IfModule mod_rewrite.c> # turn on rewrite engine RewriteEngine on RewriteBase / # if request is a directory, make sure it ends with a slash RewriteCond %{REQUEST_FILENAME} -d RewriteRule ^(.*/[^/]+)$ $1/ # if not rewritten before, AND requested file is wikka.php # turn request into a query for a default (unspecified) page RewriteCond %{QUERY_STRING} !wakka= RewriteCond %{REQUEST_FILENAME} wikka.php RewriteRule ^(.*)$ wikka.php?wakka= [QSA,L] # if not rewritten before, AND requested file is a page name # turn request into a query for that page name for wikka.php RewriteCond %{QUERY_STRING} !wakka= RewriteRule ^(.*)$ wikka.php?wakka=$1 [QSA,L] </IfModule>

  Read the article

• Project and Business Document Organization

  - by dassouki

  How do you organize, maintain edits, revisions and the relationship between: Proposals Contracts Change Orders Deliverables Projects How do you organize your projects for re-usability? For example, is there a way to add tags to projects, to make them more accessible? What's a good data structure to dump all my files on an internet server for easy access? Presently, my work folder is setup as follows: (1)/work/ (2)/projects (3)/project_a (4)/final (which includes all final documents) (5)/contracts (5)/rfp_rfq (5)/change_orders (5)/communications (logs all emails, faxes, and meeting notes and minutes) (5)/financial (6)/paid (6)/unpaid (5)/reports (4)/old (include all documents that didn't make it into the project_a/final/ (3)/project_b (4) ... same as above ... (2)/references (3)/technical_references (3)/gov_regulations (3)/data_sources (3)/books (3)/topic_based (each area of my expertise has a folder with references in them) (2)/business_contacts (3)/contacts.xls (file contains all my contacts) (2)/banking (3)/banking.xls (contains a list of all paid and unpaid invoices as well as some cool stats) (3)/quicken (to do my taxes and yada yada) (4)/year (2)/education (courses I've taken (3)/webinars (3)/seminars (3)/online_courses (2)/publications (includes the publications I've made (3)/publication_id We're mostly 5 people working together part-time on this thing. Since this is a very structured approach, I find it really difficult to remember what I've done on previous projects and go back and forth easily. What are your suggestions on improving my processes? I'm open to closed and open source software (as long as the price isn't too high). I also want to implement a system where I can save most of the projects online to increase collaboration and efficiency and reduce bandwidth especially on document editing. Imagine emailing a document back and forth 5-10 times a day.

  Read the article

• Samba 3.5 Shadow Copy for Windows 7

  - by Prashanth Sundaram

  Over the past several days I have been trying to get the shadow to work with samba but haven’t been successful. Can someone check below config and let me know if I am missing something? We are using Equallogic SAN and iSCSI LUNS to mount volumes. I can cleanly access samba shares on Windows 7 clients but just not shadow copy. I have referred the official how-to but couldn’t get it to work. I see these messages in the logs. Any help is deeply appreciated. [2012/10/31 12:20:53.549863, 0] smbd/nttrans.c:2170(call_nt_transact_ioctl) FSCTL_GET_SHADOW_COPY_DATA: connectpath /fs/test-01, failed. [2012/10/31 12:21:13.887198, 0] modules/vfs_shadow_copy2.c:734(shadow_copy2_get_shadow_copy2_data) shadow:snapdir not found for /fs/test-01 in get_shadow_copy_data [2012/10/31 12:21:13.887265, 0] smbd/nttrans.c:2170(call_nt_transact_ioctl) FSCTL_GET_SHADOW_COPY_DATA: connectpath /fs/test-01, failed. == Samba pkgs == samba-3.5.10-116.el6_2.x86_64 samba-common-3.5.10-116.el6_2.x86_64 samba-winbind-clients-3.5.10-116.el6_2.x86_64 samba-client-3.5.10-116.el6_2.x86_64 === df –h == First is the iSCSI LUN and 2 others are snapshots. /dev/mapper/eql-0-fs-test01 5.0G 2.3G 2.5G 48% /fs/test-01 /dev/mapper/eql-2-0+fs-test01 5.0G 2.3G 2.5G 48% /fs/test-01/@GMT-2012.10.26-17.32.42/fs/test-01 (SNAPSHOT-1) /dev/mapper/eql-d-0+fs-test01 5.0G 2.3G 2.5G 48% /fs/test-01/@GMT-2012.10.31-11.52.42/fs/test-01 (SNAPSHOT- 2) ===/etc/samba/smb.conf === [global] workgroup = DOMAIN server string = Samba Server Version %v security = ads realm = DOMAIN.CORP encrypt passwords = yes guest account = nobody map to guest = bad uid log file = /var/log/samba/%m.log domain master = no local master = no preferred master = no os level = 0 load printers = no show add printer wizard = no printable = no printcap name = /dev/null disable spoolss = yes follow symlinks = yes wide links = yes unix extensions = no [test] comment = Test Directories path = /fs/test-01 vfs objects = shadow_copy2 #shadow_copy2: sort = desc #shadow: localtime = yes #shadow: snapdir = /fs/test-01/test #shadow: basedir = /fs/test-01 guest ok = yes writeable = yes map archive = no force create mode = 0660 force directory mode = 2770 inherit owner = yes inherit permissions = yes All feedback is welcome. Thanks!

  Read the article

• Windows Server 2008R2 Virtual Lab Activation strategies?

  - by William Hilsum

  I have a ESXi server that I use for testing, however, I am often needing to create additional Windows Server virtual machines. Typically, if I do not need a VM for more than 30 days, I simply do not activate. However, I have been doing a lot of HA/DRS testing recently and I have had a few servers up for more than this time. I have a MSDN account with Microsoft and have already received extra keys for Windows Server 2008 R2. I am doing nothing illegal and I am sure if I asked, they would issue more - but, I do not want to tempt fate! I have got 3 different "activated" windows snapshots I can get to at any time. If I try to clone these machines, I get the usual "did you copy or move them VM" message. If I choose copy, as far as I can see, it changes the BIOS ID and NIC MACs which is enough to disable activation. If I choose move, it keeps the activation fine (obviously, I know to change the NIC MAC - I believe I can leave the BIOS ID without problems). However, either of these options keeps the same SID code for the computer and user accounts. After the activation period has expired, as far as I can see, all that happens is optional updates do not work - it seems that the normal updates work fine. Based on this, as you can easily get in to Windows when not activated without any sort of workaround, I was wondering if it is ok just to leave a machine un activated? (However, I obviously would prefer if it was activated!) Alternatively, how dangerous is it run multiple machines on a non domain environment with the same SID? I am just interested to know if anyone can recommend a strategy for me? I have only found one solution that deals with bypassing activation - I am not interested in doing anything remotely dodgy... at a stretch, I am happy to rearm (I have never needed to keep a server past 100 days), but, I would rather have a proper strategy in place.

  Read the article

• Issues installing new drivers

  - by Luke

  I have a Windows XP Home SP3 system that won't detect anything on USB. It works on Ubuntu Live (off USB), and the USB keyboard and mouse work in the BIOS. Physically speaking, I'm sure it's fine. I installed the SMBus drivers and the USB driver from the motherboard's website, adn that went fine. If I plug anything in, it can detect the type of thing it is (i.e. keyboard, mouse, flash drive, etc) and even the name sometimes (i.e. Microsoft 5 button mouse), but won't accept any drivers. I have tried putting the Windows CD in the drive, but that didn't help. I have scanned for viruses and CHKDSK with no issues, and ran a MemTest86 with no issues. I am limited to one PS/2 connection for inputs, so I'm using the keyboard and haven't tried WU yet. A colleague suggested trying a new USB controller, so I put in a PCI one that only had drivers for 9x on the CD, so I assume that XP has them built in. It goes through the Found New Hardware wizard, but never actually finds drivers. I have also tried running SFC /SCANNOW and System Restore. SFC just flashes and goes away, making me believe it may be a hidden virus somewhere, but everything else seems to work, including MSE. I have reason to believe it's just an issue with detecting hardware, since even the USB Controller card can't seem to find drivers, but it can detect WHEN a USB device is connected Anyone else run into this, or have a suggestion short of re-installing Windows?

  Read the article

• I must clear my cmos to be able to boot

  - by Fredou

  I have this Asus p7p55d-e pro for about 8 months(got it last July) and for this last 3-4 days I cannot boot without clearing my CMOS what I have is: Seasonic M12D 750W ASUS P7P55D-E Pro Intel Core i5 760 Quad Core Processor Lynnfield LGA1156 XFX GeForce® 8800 GT Alpha Dog 512MB DDR3 Standard (PV-T88P-YDF4) 2x Corsair XMS3 CMX4GX3M2A1600C7 4GB DDR3 2X2GB DDR3-1600 CL 7-8-7-20 I tried to remove all the unnecessary stuff: HD/dvd/pci card/usb cable/etc I tried with only 1 dimm filled, instead of my 4, each one individually it didn't work I tried changing the battery, here goes a few dollars to nowhere, didn't work if I don't reset the CMOS it sometime stock on RAM led, sometime on BOOT DEVICE led, when this happen, it stuck on CPU speed detection when I boot right after the reset, i MUST click on the F2 option (boot with default bios setting) if i go into the bios and save/restart, i have to reset it again when booted, everything is rock solid stable, tried memtest, cpu stress, etc, etc. without issue what should be my next step? trying a new psu? (i need to find one..) doing rma? (i need this mb since it's my only computer...) something else?

  Read the article

• What is optimal hardware configuration for heavy load LAMP application

  - by Piotr K.

  I need to run Linux-Apache-PHP-MySQL application (Moodle e-learning platform) for a large number of concurrent users - I am aiming 5000 users. By concurrent I mean that 5000 people should be able to work with the application at the same time. "Work" means not only do database reads but writes as well. The application is not very typical, since it is doing a lot of inserts/updates on the database, so caching techniques are not helping to much. We are using InnoDB storage engine. In addition application is not written with performance in mind. For instance one Apache thread usually occupies about 30-50 MB of RAM. I would be greatful for information what hardware is needed to build scalable configuration that is able to handle this kind of load. We are using right now two HP DLG 380 with two 4 core processors which are able to handle much lower load (typically 300-500 concurrent users). Is it reasonable to invest in this kind of boxes and build cluster using them or is it better to go with some more high-end hardware? I am particularly curious how many and how powerful servers are needed (number of processors/cores, size of RAM) what network equipment should be used (what kind of switches, network cards) any other hardware, like particular disc storage solutions, etc, that are needed Another thing is how to put together everything, that is what is the most optimal architecture. Clustering with MySQL is rather hard (people are complaining about MySQL Cluster, even here on Stackoverflow).

  Read the article

• Apache ProxyPassReverse and https

  - by joshuaball

  Hi, I would like to map all traffic on 80 and 443 from foo.com to an internal server: 192.168.1.101. I have a VirtualHost (Apache 2.2 on Ubuntu) setup as follows (note, I had to break up the hyperlinks below because I am a 'new user'): <VirtualHost *:80> ServerName foo.com ServerAlias *.foo.com ProxyRequests Off ProxyPreserveHost On <Proxy *> Order deny,allow Allow from all </Proxy> ProxyPass / http://192.168.1.101/ ProxyPassReverse / http://192.168.1.101/ </VirtualHost> And that works great for http traffic. However, I can't seem to do the same thing for https. I have tried: Changing VirtualHost *:80 to * - but that doesn't work (I need it http-http and https-https) Creating a new VirtualHost entry for *:443 that redirects to http://192.168.1.101/, but that fails as well (browser timeouts) I did some searching, here and elsewhere, and the closest question I could find was this, but that didn't quite answer it. Also, just out of curiosity, I tried mapping all ports to https (by changing the two ProxyPass lines from http to https (and removing the :80 from VH), and that didn't work either. How would you do that as well? Any thoughts? Thanks in advance.

  Read the article

• apache2 defaultsite redirect but not virtual host

  - by MMM

  I'm trying to set up a new server with several virtual hosts but also such that if the requested fqdn doesn't match a virtual host then the request is redirected to http://example.com/log.php?url=fqdn I have got the default host redirecting as desired however the virtual host that I have defined doesn't work. I'm testing using a different host and curl -I http://hostname.example.com:8080/ on the command line to read the html headers to check for the redirect header directly rather than following it with a browser (to avoid any caching issues). I have defined a virtualhost as the fqdn of the server but when I use curl to request that virtualhost I get redirected. If I request the server by any other name which doesn't have a virtualhost defined I also get redirected. apache version is 2.2.16 on ubuntu The config (concatenated together in order from a couple of different files) is as follows: Listen 8080 NameVirtualHost * <VirtualHost _default_> ServerAdmin [email protected] RewriteEngine On RewriteRule ^(.*)$ http://example.com/log.php?url=%{HTTP_HOST}$1 [R=302,L] </VirtualHost> <VirtualHost *> <Directory "/var/www"> allow from all Options Indexes </Directory> DocumentRoot /var/www ServerName hostname.example.com </VirtualHost> I've also tried ServerName values of hostname.example.com:* and hostname.example.com:8080 In case I wasn't clear enough: anything.anything.any/something requested from my server should redirect to example.com/log.php?url=anything.anything.any/something foo.example.com (not defined as a VirtualHost) requested from my server should redirect to example.com/log.php?url=foo.example.com hostname.example.com (defined as a VirtualHost) requested from my server should return an html document anothername.example.com (also defined as a VirtualHost) requested from my server should return an html document It turns out that because the servers own fqdn is hostname.example.com that gets redirected to the Default VirtualHost even if there is a named VirtualHost for it. Other fqdn's that are not the same as the servers fqdn work as I intended.

  Read the article

• htaccess not properly rewriting urls

  - by Cameron Ball

  This is a bit of a weird one. I'm doing some work on a server, and I need rewrite rules for directories that actually exist (in some cases, they are more than one level deep) At the moment my .htaccess looks like this: RewriteEngine on RewriteRule ^simfiles/([-\ a-zA-Z0-9:/]+)$ http://mydomain.com/?portal=simfiles&folder=$1 [L] And this is working OK, for example, a url like: mydomain.com/sifmiles/my-files Will get redirected to mydomain.com/?portal=simfiles&folder=my-files Or in the case of a directory structure that is deeper than one level: mydomain.com/sifmiles/my-files/more-of-my-files Will get redirected to mydomain.com/?portal=simfiles&folder=my-files/more-of-my-files I wrote the regex so that it won't match things with a . in the path, because there are css and js files which reside in simfiles/somedirectory, and if I redirect everything then these cannot be loaded. I tried a configuration like this: RewriteEngine on RewriteCond %{REQUEST_FILENAME} !-f RewriteRule ^simfiles/([-\ a-zA-Z0-9:/\.]+)$ http://mydomain.com/?portal=simfiles&folder=$1 [L] But that doesn't work, things still don't load properly. So my first question is, how can I achieve this "properly"? I don't like my solution because it means redirects won't occur if the folder has a . in its name. My second problem, is that while the redirection is happening properly, the url becomes: http://mydomain.com/?portal=simfiles&folder=my-files I want the URL to remain clean, like: http://mydomain.com/sifmiles/my-files How can I achieve this?

  Read the article

< Previous Page | 593 594 595 596 597 598 599 600 601 602 603 604  | Next Page >