Search Results

Search found 49218 results on 1969 pages for 'aix 10 2 0 5 grid control'.

Page 598/1969 | < Previous Page | 594 595 596 597 598 599 600 601 602 603 604 605  | Next Page >

• Bad request - Invalid Hostname Error when using ARR IP address

  - by syloc

  I'm trying to setup a simple ARR system. I have 1 ARR machine load balancing between 2 APP servers. I can reach the app sites if i use the server name of the ARR machine. (http://arrserver/app) But i can't do it with its IP address. (http://10.7.10.25/app). It gives the "Bad Request - Invalid Hostname". In the ARR machine i configured the default site's bindings to "All Unassigned","80" (default values). Do i need to change the binding rule or need additional url rewrite rules? And also, in the ARR server http://127.0.0.1/app doesn't work. But http://localhost/app works fine. Thx in advance

  Read the article

• For Loop counting from 1 to n in a windows bat script

  - by raoulsson

  I need to run a windows command n times within a bat script file. I know how to do this in various programming languages but cannot manage to get it right on the windows command line :-( I would expect something like either for(int i = 0; i < 100; i++) { // do something } or even this (though not entirely seriously) 1.upto(100, { // do something }) Thanks! EDIT I can write a program in java, perl, c or whatever that will generate a bat script that looks like this for %%N in (1 2 3 4 5 6 7 8 9 10 11 12) do echo %%N and so on. Or even "better": echo 1 echo 2 echo 3 echo 4 echo 5 echo 6 echo 7 echo 8 echo 9 echo 10 echo 11 echo 12 and then execute it... But the thing is that I need a concise way to specify a range of numbers to iterate through within the script. Thanks!

  Read the article

• ip routes to specific interface

  - by user65053

  I am trying to figure out how to get all traffic to 10.8.78.* to connect using interface ppp0 when available how would I properly handle this (centos) and can I fall back on eth0 when pp0 is not up? /sbin/route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 69.19.219.69 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0 10.0.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 0.0.0.0 10.0.1.1 0.0.0.0 UG 0 0 0 eth0

  Read the article

• Openstack - Connectivity between instances on 2 separate nodes

  - by drcursor

  I have the following setup: 1 x Management Node (node A) 2 x Compute Nodes (node B & C) 1 x Volume Node (node D) Relevant configurations: VlanManager multi_host=true Node B[eth0=192.168.6.102;br100=10.1.0.6] Node C [eth0=192.168.6.103;br100=10.1.0.4] I can ping between instances on the same node,but not with instances in different nodes. If I run "brctl br100 eth0" , Instances can ping between nodes, but I loose conectivity on eth0 (192.168.6.102/192.168.6.103) What do I have to change to be able to ping instances between nodes while maintaining normal connectivity on eth0 ?

  Read the article

• How to conform to update-rc.d with LSB standard?

  - by user34881

  This is a migrated question from stackoverflow, as I was told, this is the place for it to be. http://stackoverflow.com/questions/2263567/how-to-conform-to-update-rc-d-with-lsb-standard I have set up a simple script to back up some directories. While I haven't had any problems setting up the functionality, I'm stuck with adding the script to rcX.d dir's using update-rc.d. My script: #! /bin/sh ### BEGIN INIT INFO # Provides: backup # Required-Start: backup # Required-Stop: # Should-Stop: # Default-Start: 0 6 # Default-Stop: # Description: Backs up some dirs ### END INIT INFO check_mounted() { # Check if HD is mounted } do_backup() { if check_mounted; then # Some rsync statements. fi } case "$1" in start) do_backup ;; restart|reload|force-reload) echo "Error: argument '$1' not supported" >&2 exit 3 ;; stop|"") # No-op ;; *) echo "Usage: backup [start]" >&2 exit 3 ;; esac : Using update-rc.d backup start 10 0 6 . I get the following warnings and errors: update-rc.d: warning: backup start runlevel arguments (none) do not match LSB Default-Start values (0 6) update-rc.d: warning: backup stop runlevel arguments (0 6.) do not match LSB Default-Stop values (none) update-rc.d: error: start|stop arguments not terminated by "." The syntax I try to use is the following: update-rc.d [-n] <basename> start|stop NN runlvl [runlvl] [...] . Google wasn't that helpful at finding a solution. How can I correctly set up a script and add it via update-rc.d? I'm using Ubuntu 9.10. UPDATE Using update-rc.d backup start 10 0 6 . stop 10 0 . the error disappears. The warnings about default values persists: update-rc.d: warning: backup start runlevel arguments (none) do not match LSB Default-Start values (0 6) update-rc.d: warning: backup stop runlevel arguments (0 6 0 6) do not match LSB Default-Stop values (none) It even is added to the appropiate rcX-dirs but it still does not get executed...

  Read the article

• Microsoft CA certificate templates expires sooner than expected

  - by Tim Brigham

  The certificates my Microsoft CA is generating do not match the time period indicated in the template used. How can I resolve this? I recently created a new certificate template for use on my Linux boxes on my Microsoft CA (2008 R2 Enterprise). This template is approved for server and client authentication purposes with a validity period of 10 years - the expected lifetime of our Linux boxes - and the subject name supplied in the request. I have checked both the intermediate and offline CA - both have more than 10 years of life listed. Is there some kind of hard limit I'm hitting here?

  Read the article

• dd-wrt switch for PfSense

  - by Kmao

  I currently have eth2 on my pfsense set up, and configured as 192.168.1.1, it has dhcp setup with allocation being 192.168.1.10 - 192.168.1.245. On my dd-wrt box, i disabled the WAN, and set it to act as a port for the switch. I disabled dhcp, dnsmasq, spi firewall, Wlan0 and set a static IP for the router being 192.168.1.10 Pfsense is plugged into lan0 and pc plugged into lan1 (wan port is empty) I have followed a few different guides, but i can't seem to get my router to act as a switch. Anyone have success using DD-WRT as a switch while using pfsense as your dhcp/dns/gateway. Any advice would help :)

  Read the article

• Eventlog entry for allowed connection in Windows Firewall

  - by Jaap

  I was seeing a lot of entries in the eventlog: The Windows Filtering Platform has permitted a connection. Application Information: Process ID: 4 Application Name: System Network Information: Direction: Inbound Source Address: 10.xxx.xxx.xxx Source Port: 80 Destination Address: 10.xxx.xxx.xxx Destination Port: 31773 Protocol: 6 Filter Information: Filter Run-Time ID: 67903 Layer Name: Receive/Accept Layer Run-Time ID: 44 We have a loadbalancer which checks every second to see if the application is still running (a health check). The logs contain large amounts of this kind of entries, which makes the Event Viewer slow and it's difficult to find the more interesting logs. How do I make sure these messages don't end up in the event logs?

  Read the article

• isolate web servers on intranet with dfl-800

  - by microchasm

  I administer a small network (10 users). I'm getting ready to deploy a internal webapp that will be hosted and accessed locally only. There are about 10 users on the network (192.168.111.0/24), a win2k3 server, apache (RHEL), and Mysql (RHEL), and various miscellaneous peripheries. I'd like to isolate the apache and sql boxes into a seperate area of the lan to keep things easier to maintain/grow. I've been reading about vlans, subnets, etc.. I'm not clear, however, which would be the best solution for our setup. Thanks for any tips and or advice.

  Read the article

• Changing Windows 'hosts' file in guest OS under Parallels Desktop 6 on Mac

  - by ling

  I am running Win7 in a Parallels Desktop 6 on Mac. On the mac, I use /etc/hosts : 127.0.0.1 mysite and it works fine : I can type mysite in the url and the website will display. What I want to do is be able to reproduce the same on Win7 with IE8 for example. Another guy did it successfully here but I can't : Parallels: How to see a Mac-hosted website from Windows? On Mac : ifconfig -a vnic0 10.211.55.2 on Win7 I tried this C:\Windows\System32\drivers\etc\hosts 10.211.55.2 mysite What am I missing ?

  Read the article

• GhostScript noob help - Breaking a multipage PDF file into many single page PS or EPS files.

  - by godzilla_g

  Hi, I'm trying to do the following with ghostscript: Turn one multipage PDF file (about 3,000 pages, 200mb file) into: One file per page of the PDF, and convert each (page/file) to EPS or PS (post script(preferably)). Example: hello.pdf (10 pages) would produce: hello1.ps (page 1 out of 10) hello2.ps hello3.ps ... hello10.ps How can I do this? I've been trying for 4 days, and can't figure it out. I have a script I've tried(won't work): Note: Windows(7) user here. gs -sDEVICE=epswrite -o documentname-%.eps documentname.pdf I also don't know how to navigate to the directory where my file resides (cannot figure that out, too). If you can, please show me how. A big thank you.

  Read the article

• PostgreSQL RAID configuration

  - by Yoldar-Zi

  I'm stuck how best to configure disk array. We have Hp P2000 G3 disk array with 24 SAS physical disks 300Gb each. We need to configure this array got 2 copies of PostgreSQL 9.2 because two different system. As we know it's recommended to store database and transaction logs(pg_xlog) files on separate disks. So we must setup 4 logical disk: 2 for transaction logs with RAID 1 2 for database with RAID 10 Is this right scheme of distribution? Or may be it is best to just make one big RAID 10 with 4 logical disks?

  Read the article

• Backups of Exchange 2007 SP3 using VSS are abnormally large

  - by Stew

  I have recently implemented Veeam backup and recovery 6.0, and have noted when backing up my exchange server via incremental updates, it is transferring way more data than expected. Backup is incremental, and setup to use VSS. VSS is stable and healthy, according to vssadmin. Exchange 2007 SP3 running on Windows Server 2008 R2, just last weekend I installed the latest Rollup for Exchange. I thought the nightly incrementals were large, but perhaps my users really are sending that much mail so I tested taking one incremental backup, waiting 10 minutes and taking a second. The second incremental backup transfered 5.8GB of data. We as an organization are absolutely NOT putting 5.8GB of data on the mail server every 10 minutes. Are there any other veeam users who have seen something similar? Is my test faulted? Are there other considerations for VSS?

  Read the article

• Excel wizardness needed - Group By, Sort, Count function help

  - by Chris

  Riddle me this: You have 3 part numbers with the same part name xyz, each with a quantity of 10 items. The items can be picked during the day or week, therefore changing the amount of items on hand. I know I need to use the group by, sort, count and perhaps sumif formulas to have a running count of the number of items on hand at the end of each day (which could be positive or negative). Help? it wont let me add an image because i'm a new user. 'Oops! Your edit couldn't be submitted because: * we're sorry, but as a spam prevention mechanism, new users aren't allowed to post images. Earn more than 10 reputation to post images. '

  Read the article

• Identifying the version of ATI Catalyst drivers

  - by Snark

  I have bought a new video card based on the ATI Radeon HD 5670 chipset. I couldn't make it work with the latest ATI Catalyst drivers found on their website, only the drivers found on the CD delivered with the card worked. How can I know the version of Catalyst that is installed on my PC (running Windows 7 64-bits)? The ATI Catalyst Control Center returns the following information: Driver Packaging Version 8.673-091110a-092263C Provider ATI Technologies Inc. 2D Driver Version 8.01.01.973 2D Driver File Path /REGISTRY/MACHINE/SYSTEM/ControlSet001/Control/CLASS/{4D36E968-E325-11CE-BFC1-08002BE10318}/0000 Direct3D Version 8.14.10.0708 OpenGL Version 6.14.10.9120 Catalyst™ Control Center Version 2009.1110.2225.40230 I do not recognize anything pointing to a "marketing version". The website says the current version of Catalyst is 10.2.

  Read the article

• Windows 2008, 2 NICS, routing problem

  - by Srodriguez

  Dear all, I've some questions regarding basic routing, can't seem to relate to other questions posted in this site. My architecture: Windows 2008 server with 2 nics in the server. NIC1: IP 10.198.6.xxx, submask 255.255.252.0, gateway 10.198.4.xxx NIC2: IP 192.168.168.xxx, submask 255.255.255, no gateway defined both NICS are just connected to two separate switches, with other computers. I want to be able that all the requests that have a destination of 192.168.168.xxx are redirected to the NIC2, all the other to the NIC1. I know it's possible to do it with the route command, but normally we have to specify a gateway? (route ADD 192.168.168.0 MASK 255.255.255.0 ???) How can this be archived? Thanks a lot for your help!

  Read the article

• subversion instillation on centos 5.8

  - by user57221

  I am trying to install subversion on centos 5.8 usingyum install subversion and it is throwing the error below. ..... .... Total size: 7.3 M Is this ok [y/N]: y Downloading Packages: Running rpm_check_debug ERROR with rpm_check_debug vs depsolve: libapr-1.so.0()(64bit) is needed by subversion-1.6.11-10.el5_8.x86_64 libaprutil-1.so.0()(64bit) is needed by subversion-1.6.11-10.el5_8.x86_64 libapr-1.so.0()(64bit) is needed by (installed) mod_perl-2.0.4-6.el5.x86_64 apr is needed by (installed) httpd-2.2.22-12051516.x86_64 /usr/lib64/libapr-1.so.0 is needed by (installed) httpd-2.2.22-12051516.x86_64 libaprutil-1.so.0()(64bit) is needed by (installed) mod_perl-2.0.4-6.el5.x86_64 apr-util is needed by (installed) httpd-2.2.22-12051516.x86_64 /usr/lib64/libaprutil-1.so.0 is needed by (installed) httpd-2.2.22-12051516.x86_64 Complete! (1, [u'Please report this error in http://bugs.centos.org/yum5bug']) How do i resolve this?

  Read the article

• is there a way to prespecify to overwrite files with same name?

  - by Celeritas

  Connections to network drives are ridiculously slow (e.g. 15kb/sec on really good days) and when I'm copying files I leave my desk. My problem is when there is a file with the same name to be overwritten, is there a way to specify in advanced to overwrite files? I know it has the option "do same for next x conflicts" but that doesn't popup until (in some cases) a long time after the files start copying. See my dilemma? Example: copying 500 files, estimated time 2 hours, I leave, after 10 minutes message comes up about file with same name and asks if it should overwrite (in this time copying stalls), I come back 30 minutes latter to find only the files in the 10 minutes copied. Out of curiosity how could the network speed be so bad? I asked the boss and he said because it gets routed around a lot and is just bad :(

  Read the article

• VirtualBox Port Fowarding to Connect to PostgreSQL Database

  - by kliao

  I'm trying to connect to a PostgreSQL database hosted on a Win7 guest from a Win7 host. I've configured security in pg_hba.conf host all all 127.0.0.1/32 md5 host all all 10.0.2.15/32 md5 host all all 192.168.1.6/32 md5 and set the listen_addresses setting in postgresql.conf to '*'. I think I've set up port forwarding correctly as I see: Key: VBoxInternal/Devices/e1000/0/LUN#0/Config/win7_vm1/GuestPort, Value: 5432 Key: VBoxInternal/Devices/e1000/0/LUN#0/Config/win7_vm1/HostPort, Value: 5432 Key: VBoxInternal/Devices/e1000/0/LUN#0/Config/win7_vm1/Protocol, Value: TCP when I call getextradata. This is similar to http://serverfault.com/questions/106168/cant-connect-to-postgresql-on-virtualbox-guest but I'm not sure what I'm doing wrong. In the vbox.log file I see: 00:00:01.019 NAT: set redirect TCP host port 5432 = guest port 5432 @ 10.0.2.15 00:00:01.033 NAT: failed to redirect TCP 5432 = 5432 but I'm not sure how to fix that. Any ideas? Thanks.

  Read the article

• ASA 5505 8.4 open ports for subnet

  - by fwrawx

  I have an ASA 5505 running 8.4 with its outside interface plugged into our internal network. I want to open up access to hosts on one of the vlans behind that ASA to hosts on our internal network. I was just starting to grasp NAT on our older PIX but the ASA 8.4 has me confused now. Given a clean ASA with an outside vlan of 10.0.0.1/24 and test vlan of 10.0.1.1/24 what's the basic configuration needed to allow any hosts on the outside network to have access to any of the hosts on the test network?

  Read the article

• Brocade 200E Switch - Fibre Channel

  - by Arthor

  What I have: Fujitsu-Siemens PRIMERGY BX600 Brocade 200E (16 port, 4gbit fibre). My question: Imagine a QNAP with a fiber 10GBIT card connected to the Brocade 200E (16 port, 4gbit fibre). Would this work; would the card drop down to 4GBIT? Are 10GBIT fiber cards backwards completable. Update. I have the specs of my server now.... Fujitsu-Siemens PRIMERGY BX600 S3 Blade Ecosystem Blade Chassis comprising; 2 x A3C40073243 Blade Management modules 2 x A3C40089238 GBE Switch Blade SB9F 30/12 2 x A3C40085736 4Gb 10 port pass through blades 1 x A3C40083767 Digital KVM Modules 2 x A3C40073245 Fan enclosures + cooling fans 4 x A3C40073262 Power Supplies My Goals and Objectives To have a blade system in place for 8 blades for video rendering, the other 2 for database and scripts etc The system will be built on VMWARE ESXi 5 Use ISCSI on the QNAP to support HA and vmotion if needed Users to access the qnap for video editing QANAP has 12 drive (2 x (6 HDD in RAID 10)

  Read the article

• timeout with apache & php w/ each virtual host has his own user process

  - by acemtp

  I have 10 unix users in /home/. Each user is for a specific subdomain for example user www in /home/www/public_html is for www.mywebsite. blog in /home/blog/public_html is for blog.mywebsite. 90% is php and 10% ror for the moment i use apache + fastcgi that use SuexecUserGroup to setup the process with the good user. it seems to works but i have a strange behavior where after a few hours/days, the server stop answering (timeout) but the cpu load is still very low (it's a big server), the apache status display lot of "W" Sending Reply states but there's still 50 idle workers so it should be able to answer. in the older server (lot of slower) we add only one user and using mod_php and we never had this issue. is there another way to do that without fastcgi and SuexecUserGroup or do you know what's going wrong?

  Read the article

• retransmission of lost TCP segment

  - by tcpip

  What will happen in the following scenario (assume the connection is already established): (stack A) send 10 byte data (stack B) send ACK for 10 byte data (stack B) send 200 byte data (stack B) send 100 byte data (stack B) send 50 byte data (stack A) send ACK for 350 byte data and also send 70 bytes data This segment gets lost and does not reach machine B. (stack B) retransmit 200 byte data (step 3) (stack A) send ACK for 200 byte data and the next expected seq number as the one for 70 bytes data Question: Should 70 bytes data be also transferred with the ACK in step 8? Note that the retransmission timer for step 6 has not expired yet.

  Read the article

• Solaris x86: Non working keys on keyboard (<, >, #, |)

  - by Thomas

  Hello everyone, I have a new installation of Solaris 10 10/09 on x86 hardware. The attached keyboard has a normal German layout. The system is configured accordingly by 'kbd -s'. The generic keys (letter, number, umlaut) work fine. Unfortunately some keys like <, , | or # do not. They produce no output on the text console at all. I tried PS/2 and USB keyboards. I cannot test it under X11 as it is currently not working. Thanks.

  Read the article

• How to route all traffic over site to site VPN tunnel?

  - by Hutch

  I have a site to site VPN configured between our main site (Site A) and a remote site (Site B). Site A is 10.60.0.0/16 Site B is 192.168.99.0/24 The firewall in Site B is a Juniper SSG running ScreenOS 6.3 and I'm using a route based VPN. The tunnel works perfectly in that from Site A you can reach 192.168.99.0 via the tunnel, and from Site B you can reach 10.60.0.0 via the tunnel. However, we want it so that if you're in Site B and want the Internet it goes via the firewall at Site A, and right now on the Juniper 0.0.0.0 has the ISP router as next hop. My understanding is that on the Juniper, I can set a route for the /32 public IP at our main site that the VPN tunnel connects to to the ISP router via ethernet0/0 (the SSG's external interface), and then modify the 0.0.0.0 route to use our main site firewall via tunnel.1 (the VPN tunnel). Not sure I've explained that so well but is my understanding correct? Thanks

  Read the article

< Previous Page | 594 595 596 597 598 599 600 601 602 603 604 605  | Next Page >