Search Results

Search found 1975 results on 79 pages for 'envelope printer'.

Page 6/79 | < Previous Page | 2 3 4 5 6 7 8 9 10 11 12 13  | Next Page >

• A switch and router between the printer and PC that want to print but cannot

  - by Robert Memo

  IP 192.168.1.5 has a wireless connection to a Linksys router (192.168.1.1) which then is connected to a switch. The switch is connected to a server (192.168.0.2). My printer has IP address of 192.168.0.8. Internet connection is fine on 192.168.1.5. Problem 1: IP 192.168.1.5 can not print using printer 192.168.0.8. Problem 2: IP 192.168.1.2 can not access a shared folder on the the server. The reason for connecting this way is that, the server does not release wireless signal. In order to get wireless signal the Router is connected to the switch. The server is a computer server that only has one outgoing LAN port. Plus, due to inconvinience physical locations, I do not have option to change the physical locations and the way it is connected already. I just want the labtops that only have wireless connection to communicate with the printer and the server. I have tried to change the router IP address to 192.168.0.x like the server and printer. It caused problem for the laptop. The router no longer release internet signals. The router does have IP address from the server 192.168.0.5.

  Read the article

• iPhone Bluetooth application to connect to a Bluetooth printer

  - by Vijayanand

  Hi, Has anybody succeeded in developing a bluetooth application on the iPhone that prints to a Bluetooth printer? I have been investigating the feasibility of developing an iPhone application that could print to a Bluetooth-enabled printer. I've gone through the most of the postings in this thread and was confused by the mail exchanges. As per my analysis: Gamekit - can be used for bluetooth connectivity between iPhones and IPods ONLY Bonjour - can be used for wi-fi connectivity between iPhones/IPods and bonjour-enabled printer We can use an external accessory to connect to a third party Bluetooth-enabled printer provided the 3rd-party printer complies with the necessary regulations from Apple (registering for either “Made for iPod”/ “Works with iPhone”, and also customizing their printer with specific hardware/software, etc.) Could someone please share their experiences?

  Read the article

• How to print lots of Envelopes.

  - by Ian Ringrose

  How to print lots of Envelopes. I wish to print onto lots of envelopes: A few thousand as a one of task (may repeat each year) Good quality colour photo and graphics that has solid colour (plus some black text) Be painless to operate, I don’t wish to have to clear jams often As I need to put the envelopes into batches, I don’t need an input try that will take hundreds of envelopes. I also need to get a new colour printer to print normal A4 paper; this may or may not be the same printer. I live in the UK, if you care. What should I be looking at?

  Read the article

• Install Additional Printer Drivers (x86) on Vista (x64) - Can't find suitable (x86) ntprint.inf

  - by jmohr

  I have a printer connected to my computer that I'd like to share on my home network - shouldn't be a problem. The computer the printer is connected to is running Vista Ultimate x64. The computers I'm trying to share with are x86 Windows XP Professional and x86 Vista, so I need to install additional (x86) drivers. I checked the box to add x86 printer drivers and then it asked for the location of the drivers. I browsed to the location and clicked OK. It then prompted "Please provide path to Windows media (x86 processor). When I click "Browse..." it wants the location of a file named ntprint.inf It looks like it's asking for a Windows (x86) installation disk. I put one in but I can't seem to find this file on the 32-bit Vista install disk Where is the proper place to find this file?

  Read the article

• How do I install an HP home-use printer on Windows Home Server (Windows Server 2003)

  - by Rob Allen

  I have an HP DeskJet F4210 printer that I would like to share on my network via Windows Home Server. Unfortunately, the driver installation checks for supported OS's, detects Home Server as Windows Server 2003 and exits. The driver install supports WinXP, W2k, Vista, and Win98SE. In theory, drivers for XP or Windows 2000 should work fine with Home Server. When using the "Install Printer" tool in Home Server I am only able to select .inf files (there are serveral on the install media) but the driver folders for XP and 2000 have .sys and .dll files. How can I bypass HP's short-sighted install program and get this printer up and running on Home server? I'll be happy with basic print functionality and will save the task of enabling scanning for another time.

  Read the article

• Dell printer goes offline after second print job.

  - by Ac0ua

  Dell printer goes offline(server connection) after second print job. Although the printer's display says it is ready. If you turn off then on the printer you can send one job and goes back offline(server connection) on the next print job. We have multiple Dell 2330dn printers installed through a print server, only one of the printers is experiencing this problem. Two different users. Two different machines. Two different operating systems (win7 and Vista). The computers have been reset. Dell printers have web interface if this helps (through IP address). Thanks for any help!

  Read the article

• Brother Printer not picking up A5 size paper

  - by Mirage

  I have Brother HL 5040D printer . I want to print some stuff on A5 size. I have done setting on MS word. There is small tray in Brother Printer manin tray where i can put any samll paper and then move the clamps so that it fits the paper. But when i give print command the printer tries to pick up paper but is unable to do so. Then it gave paper light means it can't load the paper. What should i do

  Read the article

• Add a remote printer over ssh on OSX?

  - by GradGuy

  I have a printer at my office that is connected to a local network and my linux box at work can see it on the network. However, it is not visible to the outside world. I was trying to figure out a way to add it on my MacAir and so far have found two options: 1) Using ssh tunnel via CLI: cat file.pdf | ssh user@linuxbox lpr. 2) With Chrome installed on the linux box, using the Google Cloud Print service on the remote box and automator on my MacAir I can add the printer to Cmnd+p dialog box I like the first method since it does not require Chrome be installed and the second one since it allows to use Cmnd+p inside all applications. I was wondering if there is a way to combine by using automator to run the first command line script. What about port forwarding? Is it possible to forward the remote CUPS 631 port to a local port and then add the printer normally? What other methods would you recommend?

  Read the article

• HP Printer odd behaviour in Vista Home Basic

  - by ricardo.acras

  I Have a HP 1018 printer. In my previous PC (with vista home premium) it worked just fine, and still works. In my new PC, which came with vista home basic, the printing almost never works. What happens is as follows 1 - I install the printer, windows says its ok. 2 - I send a document to print. 3 - Printer screen (spool) shows the document for 1 or 2 seconds and then it disappear. For two times it worked after numerous reinstallations, and after I restart my computer it stop working again. Any Ideas?

  Read the article

• Single domain user can't install a specific shared network printer

  - by drpcken

  I have a file server serving up shared network printers. Never had any issues in the past. I have a specific domain user (just 1) that gets this error when trying to install a specific printer: You do not have sufficient access to your computer to connect to the selected printer This user can install all the other printers no problem. All my other domain users can install the printer with no problem. I've removed the driver from the local client and tried again but with the same problem. Even as an administrator I get this error. Is there something I'm missing?

  Read the article

• Windows 7 & kodak printer esp 7

  - by Yoraf

  I have bought a new PC with Windows 7 and a Kodak wireless printer esp 7. I can't download the software always unsuccessful and can't connect to my printer. Any suggestions? Edit (from the other, duplicate question): Still having problems with printing. I did get it working by removing 'bonjour' but turned on yesterday and hey presto it's not working again. The printer is installed and showing as disconnected. Any ideas now? The chat doesn't work with Windows 7, I have downloaded the latest version, they take ages to answer emails, need to print stuff urgently. It's driving me insane!! Please help.

  Read the article

• Window 7 not recognizing printer for driver (re)installation

  - by user55406

  OK I am having this printer problem. I had a user delete her printer. Please don't ask, I don't know. She is using an HP deskjet 6940 printer, and for her desktop she has an HP dx2400, with Windows 7. When I plug in the USB cable it should install the new drivers, but it does not. I believe you guys don't need to know my network setup. I could be wrong. If you guys here at serverfault could help that will be great. :)

  Read the article

• Temporarily block other users from network printer

  - by TecBrat

  I found where someone else asked this question here, but they did not get a working answer. We have a printer that is shared. It has it's own network card, so we all have equal access to it. (none of our computers owns it) One of our users needs to print on specialty paper and we need to be sure not to print when that paper is in the printer. Our current method is "Hey, don't print anything right now!" Obviously this method is not preferred because it does not enforce itself. :-) I think all our PCs are running Win7 Home. The printer in question is an HP Laserjet 2200. Is there a way that we can make this happen?

  Read the article

• Adding a 'network' USB printer

  - by AndrewK

  I have a HP Deskjet 1050a printer, hence the 'network' in the title. Its a bog standard USB home printer. I have it attached to my router (has a USB port in it). I have got it connected and working to with Win8 PC and also a MacBook Air. Can't seem to get it to add as a printer to my Xubuntu laptop(s). It doesn't get detected automatically (not an actual network printer) and i've tried multiple options to get it working. It seems to add it but when printing a test page its saying the printer isn't connected. Ping works fine so it can see it, just can't add it as a printer. With Win8 I had to create a port with the IP of the printer (192.168.1.253 in this case), is there an Ubuntu alternative to do this?

  Read the article

• Reading status from Zebra Printer

  - by pmoreira

  Hi, I'm working on a project where we need to use a Zebra Printer for barcode labels. We're using C#, and we're doing OK on the printing side of things, sending raw ZPL strings to the printer (using winspool.drv). However, we also need to read from the printer, and no luck there. We need to get the status from the printer, which is the output to the ZPL command "~HS", so we can tell how many labels are in memory waiting to be printed. The EnumJobs() from winspool.drv only has jobs on the windows spool, and once they're sent to the printer, they're gone from that list. But that doesn't mean the label has been printed, since the printer has a peel sensor and only prints one label at a time, and we're obviously interested in sending batches of labels to the printer. I've tried something like (using the winspool.drv calls): OpenPrinter(szPrinterName, out hPrinter, IntPtr.Zero); WritePrinter(hPrinter, pBytes, dwCount, out dwWritten); // send the string "~HS" ReadPrinter(hPrinter, data, buff, out pcRead); But I get nothing on the ReadPrinter call. I don't even know if this is the right way of going at it. Anyone out there tackled this before? Thanks.

  Read the article

• C# to find JobId, Owner, TotalPages from Printer

  - by tanthiamhuat

  My below code works when the Form loads and I can get a list of Network Printers in listBox1. I am also able to see a specific printer's property name and value in listBox2. private void Form1_Load(object sender, EventArgs e) { foreach (String printer in PrinterSettings.InstalledPrinters) { listBox1.Items.Add(printer.ToString()); } } private void button1_Click(object sender, EventArgs e) { string printerName = "Ricoh-L4-1"; string query = string.Format("SELECT * from Win32_Printer WHERE Name LIKE '%{0}'", printerName); ManagementObjectSearcher searcher = new ManagementObjectSearcher(query); ManagementObjectCollection coll = searcher.Get(); foreach (ManagementObject printer in coll) { foreach (PropertyData property in printer.Properties) { listBox2.Items.Add(string.Format("{0}: {1}", property.Name, property.Value)); } } } But when I try to find JobId, Owner, TotalPages for a particular printer (when I actually send jobs to print to that printer), those values do not display at all. private void button2_Click(object sender, EventArgs e) { listBox2.Items.Clear(); string printerName = "Ricoh-L4-1"; string query = string.Format("SELECT * from Win32_PrintJob WHERE Name LIKE '%{0}'", printerName); ManagementObjectSearcher SearchPrintJobs = new ManagementObjectSearcher(query); ManagementObjectCollection PrntJobCollection = SearchPrintJobs.Get(); foreach (ManagementObject PrntJob in PrntJobCollection) { string m_JobID = PrntJob.Properties["JobId"].Value.ToString(); string m_Owner = PrntJob.Properties["Owner"].Value.ToString(); string m_TotalPages = PrntJob.Properties["TotalPages"].Value.ToString(); listBox2.Items.Add(string.Format("{0}:{1}:{2}", m_JobID,m_Owner,m_TotalPages)); } } Do you have any idea how to get above to work? thanks in advance.

  Read the article

• Add Network Printer drivers in Windows 7/Server 2008 R2?

  - by Matias Nino

  I'm running a 64 bit Windows 7 / Windows 2008 R2 workstation that I just installed. I need to add a printer that is shared on the network from a 32bit Windows 2000 print server. This is an HP LaserJet 5Si printer, the drivers for which HP tells me are automatically built into Windows 7/R2. However, whenever I connect to the printer or try to add it, I get the following screen: Upon clicking OK, I get this screen asking me to locate the driver: How can I possibly locate a driver that is SUPPOSED TO BE NATIVELY SUPPORTED on Windows 7/R2? The tough part is that this printer is one of many shared on a server and does not have a direct IP address. Even worse: I have no access to the print server so I cannot put the 64 bit drivers on there. Any ideas? UPDATE: HP doesn't make a Vista driver either. It claims it is natively supported by Vista and 7, which is true because I am able to create a local printer on a fake tcp/ip port and Windows lets me pick the proper driver. However, when adding from the network, Windows does not let me select a driver and demands an INF. I tried searching the entire sub-structure of the C:\Windows directory and could not find any INF files that contain HP information. The INF might be located somewhere in the Windows installation DVD, but all the files on the DVD are compressed and unrecognizable. UPDATE #2 I installed the proper printer driver as a local printer (with no printer attached) and it installed. However, this did not change the fact that it STILL asks me to provide drivers when connecting to the networked printer.

  Read the article

• Printer features don't work when printing to Canon Printers ir5185 and ir7095 in Snow Leopard

  - by Ken

  Recently updated to iMac running Snow Leopard. Connected Canon printers ir7095 and ir5185 via ethernet and downloaded latest drivers from Canon website. Can print to both from InDesign CS3, however, when I select printer features such as heavy paper and printing to stack bypass, it prints but just defaults to plain paper in drawer 1. Also, when printing to ir7095, 0001 prints five times on sheet in background. Is there any way to get the printer features that are available to work?

  Read the article

• Brother DCP-145C printer problem

  - by erkan

  I have a Brother DCP-145C printer installed and it does not print black ink. I tried running diagnostics and test pages, the driver is installed properly. It doesn't matter if I send the data from the pc, or use the scanning function. What could be the problem? Printer is brand new by the way, should i return it?

  Read the article

• Network Printer installs driver every time i connect

  - by Patrick Schneider

  running a Citrix XenApp 6.5 Farm with a strange problem. Using Ricoh UPD 3.10 and every time a user log on into a Citrix Session and get the printers connected (via logon script) Windows shows the "Finishing installation..." dialog for every printer. The Drivers are installed on all Citrix Server and every time a user connects a printer the dialog appears. Are there any settings how to disable this behaviour?

  Read the article

• Show default linux printer?

  - by C.W.Holeman II

  Linux command lpadmin will set the default printer. How does one show what the default printer is from the command line?

  Read the article

• Brother ink printer: vertical adjustment of alignment does not work

  - by Ralf

  I have a brother mfc-5440cn and tried to adjust the vertical alignment with the result that the printing quality now is very poor. The printer prints a small schadow next to each letter :-( I tried to re-adjust the alignment, but for the 600dpi settings, there is no pattern that matches the 0-pattern (you know what I mean when you've once adjsuted a brother printer :-) Is there a way to make a factory reset?

  Read the article

• Most ink-friendly printer?

  - by Groves

  I have an Epson stylus printer that suspends printing if any one of the four colors (CMYK) are empty. Its a total waste of money and time because i have to go to the store to replace a single color when all i want to do is print b&w. Can someone recommend a printer that: Does not suspend printing when cartridges are low or empty Uses larger cartridges so i don't have to replace them so frequently

  Read the article

• Photocopying using a separate scanner and printer

  - by jay

  I have 2 printers. HP Deskjet F2235 - designated scanner (has printing issues) Brother HL-2040 - designated printer (doesn't have a scanner) Just by using those two both connected to the same computer, is there a way to perform a photocopy operation by scanning via the designated scanner then immediately it being printed from the designated printer? Obviously you could save the scanned files then print them, but short of making a script or manually doing this, is there a faster automatic way through settings or third-party software?

  Read the article

• How to setup an ascii text-only printer in OS X

  - by mc23646266

  Is it possible to setup a printer equivalent to the Windows 'generic ascii text-only printer' in Mac OS X. I cannot find anything about it within the current cups drivers docs. But I think there has been one in the early days, isn't it? The goal is to print to a file with generic ascii only.

  Read the article

< Previous Page | 2 3 4 5 6 7 8 9 10 11 12 13  | Next Page >