Search Results

Search found 1021 results on 41 pages for 'growl notify'.

Page 6/41 | < Previous Page | 2 3 4 5 6 7 8 9 10 11 12 13  | Next Page >

  • Nagios notifications definitions

    - by Colin
    I am trying to monitor a web server in such a way that I want to search for a particular string on a page via http. The command is defined in command.cfg as follows # 'check_http-mysite command definition' define command { command_name check_http-mysite command_line /usr/lib/nagios/plugins/check_http -H mysite.example.com -s "Some text" } # 'notify-host-by-sms' command definition define command { command_name notify-host-by-sms command_line /usr/bin/send_sms $CONTACTPAGER$ "Nagios - $NOTIFICATIONTYPE$ :Host$HOSTALIAS$ is $HOSTSTATE$ ($OUTPUT$)" } # 'notify-service-by-sms' command definition define command { command_name notify-service-by-sms command_line /usr/bin/send_sms $CONTACTPAGER$ "Nagios - $NOTIFICATIONTYPE$: $HOSTALIAS$/$SERVICEDESC$ is $SERVICESTATE$ ($OUTPUT$)" } Now if nagios doesn't find "Some text" on the home page mysite.example.com, nagios should notify a contact via sms through the Clickatell http API which I have a script for that that I have tested and found that it works fine. Whenever I change the command definition to search for a string which is not on the page, and restart nagios, I can see on the web interface that the string was not found. What I don't understand is why isn't the notification sent though I have defined the host, hostgroup, contact, contactgroup and service and so forth. What I'm I missing, these are my definitions, In my web access through the cgi I can see that I have notifications have been defined and enabled though I don't get both email and sms notifications during hard status changes. host.cfg define host { use generic-host host_name HAL alias IBM-1 address xxx.xxx.xxx.xxx check_command check_http-mysite } *hostgroups_nagios2.cfg* # my website define hostgroup{ hostgroup_name my-servers alias All My Servers members HAL } *contacts_nagios2.cfg* define contact { contact_name colin alias Colin Y service_notification_period 24x7 host_notification_period 24x7 service_notification_options w,u,c,r,f,s host_notification_options d,u,r,f,s service_notification_commands notify-service-by-email,notify-service-by-sms host_notification_commands notify-host-by-email,notify-host-by-sms email [email protected] pager +254xxxxxxxxx } define contactgroup{ contactgroup_name site_admin alias Site Administrator members colin } *services_nagios2.cfg* # check for particular string in page via http define service { hostgroup_name my-servers service_description STRING CHECK check_command check_http-mysite use generic-service notification_interval 0 ; set > 0 if you want to be renotified contacts colin contact_groups site_admin } Could someone please tell me where I'm going wrong. Here are the generic-host and generic-service definitions *generic-service_nagios2.cfg* # generic service template definition define service{ name generic-service ; The 'name' of this service template active_checks_enabled 1 ; Active service checks are enabled passive_checks_enabled 1 ; Passive service checks are enabled/accepted parallelize_check 1 ; Active service checks should be parallelized (disabling this can lead to major performance problems) obsess_over_service 1 ; We should obsess over this service (if necessary) check_freshness 0 ; Default is to NOT check service 'freshness' notifications_enabled 1 ; Service notifications are enabled event_handler_enabled 1 ; Service event handler is enabled flap_detection_enabled 1 ; Flap detection is enabled failure_prediction_enabled 1 ; Failure prediction is enabled process_perf_data 1 ; Process performance data retain_status_information 1 ; Retain status information across program restarts retain_nonstatus_information 1 ; Retain non-status information across program restarts notification_interval 0 ; Only send notifications on status change by default. is_volatile 0 check_period 24x7 normal_check_interval 5 retry_check_interval 1 max_check_attempts 4 notification_period 24x7 notification_options w,u,c,r contact_groups site_admin register 0 ; DONT REGISTER THIS DEFINITION - ITS NOT A REAL SERVICE, JUST A TEMPLATE! } *generic-host_nagios2.cfg* define host{ name generic-host ; The name of this host template notifications_enabled 1 ; Host notifications are enabled event_handler_enabled 1 ; Host event handler is enabled flap_detection_enabled 1 ; Flap detection is enabled failure_prediction_enabled 1 ; Failure prediction is enabled process_perf_data 1 ; Process performance data retain_status_information 1 ; Retain status information across program restarts retain_nonstatus_information 1 ; Retain non-status information across program restarts max_check_attempts 10 notification_interval 0 notification_period 24x7 notification_options d,u,r contact_groups site_admin register 1 ; DONT REGISTER THIS DEFINITION - ITS NOT A REAL HOST, JUST A TEMPLATE! }

    Read the article

  • shinken/nagios discriminative between warning alert and critical alert

    - by SWdream
    i using shinken for my monitoring system. Now, i have a problem when i configure shinken notification. My purpose is to discriminative between notification for warning state and critical state of check service: with warning state: + time to send alert from 8h = 18 h everyday, via email and sms + notification_interval is 60 minutes (Re-notify about service problems every hour) with critical state: + time to send alert : all time (24 x 7), via email and sms + notification_interval is 30 minutes Please show me how to solve my problem! I have tried the following: i configured: + contact templates: define contact{ name warning-contact ; The name of this contact template register 0 ; DONT REGISTER THIS DEFINITION - ITS NOT A REAL CONTACT, JUST A TEMPLATE! host_notifications_enabled 1 define contact{ service_notifications_enabled 1 email shinken@localhost can_submit_commands 1 notificationways email_warning, sms_warning } define contact{ name critical-contact ; The name of this contact template register 0 ; DONT REGISTER THIS DEFINITION - ITS NOT A REAL CONTACT, JUST A TEMPLATE! host_notifications_enabled 1 service_notifications_enabled 1 email shinken@localhost can_submit_commands 1 notificationways email_critical, sms_critical } + time poriod templates: define timeperiod{ timeperiod_name warning alias Normal Work Hours monday 08:00-18:00 tuesday 08:00-18:00 wednesday 08:00-18:00 thursday 08:00-18:00 friday 08:00-18:00 saturday 08:00-18:00 sunday 08:00-18:00 #exclude 24x7 } define timeperiod{ timeperiod_name 24x7 alias 24_Hours_A_Day,_7_Days_A_Week sunday 00:00-24:00 monday 00:00-24:00 tuesday 00:00-24:00 wednesday 00:00-24:00 thursday 00:00-24:00 friday 00:00-24:00 saturday 00:00-24:00 #exclude workhours } + notification way templates: define notificationway{ notificationway_name email_warning service_notification_period warning host_notification_period warning service_notification_options w host_notification_options d,u,r,f,s notification_interval 60 ; Resend notifications every 30 minutes service_notification_commands notify-service-by-email ; send service notifications via email host_notification_commands notify-host-by-email ; send host notifications via email } define notificationway{ notificationway_name email_critical service_notification_period 24x7 host_notification_period 24x7 service_notification_options c,r host_notification_options d,u,r,f,s notification_interval 30 ; Resend notifications every 30 minutes service_notification_commands notify-service-by-email ; send service notifications via email host_notification_commands notify-host-by-email ; send host notifications via email } define notificationway{ notificationway_name sms_warning service_notification_period warning host_notification_period warning service_notification_options w host_notification_options d,u,r,f,s notification_interval 60 ; Resend notifications every 30 minutes service_notification_commands notify-service-by-sms ; send service notifications via sms host_notification_commands notify-host-by-sms ; send host notifications via sms } define notificationway{ notificationway_name sms_critical service_notification_period 24x7 host_notification_period 24x7 service_notification_options c,r host_notification_options d,u,r,f,s notification_interval 30 ; Resend notifications every 30 minutes service_notification_commands notify-service-by-sms ; send service notifications via sms host_notification_commands notify-host-by-sms ; send host notifications via sms } + my contacts define contact{ use warning-contact contact_name thanhwarn email xxxx pager xxxx ; contact phone number } define contact{ use critical-contact contact_name thanhcritical email xxxxx pager 01689xxxx ; contact phone number } + and define service: define service{ use generic-service service_description check_ram host_name graphite contacts thanhcritical, thanhwarn check_command check_nrpe!check_ram } but my shinken system don't send alert. i don't understand this. please show me where I went wrong! thanks all!

    Read the article

  • How do I configure an extreme feedback device to notify CI build status?

    - by Gishu
    Trying to save the next guy/gal some trouble in finding out what is needed to setup lava lamps or traffic lights or what have you (the term I believe is eXtreme Feedback Devices) as a BIG VISIBLE INDICATOR of your continuous integration build status. Ensure your post includes... (and please don't mess this question up with imaginative responses.. although it may be insanely funny at the point of conception) the XFD what 'helper' hardware is needed software that you managed to hook it up with detailed instructions on how to set it up

    Read the article

  • getting global name not defined error

    - by nashr rafeeg
    i have the following class class notify(): def __init__(self,server="localhost", port=23053): self.host = server self.port = port register = gntp.GNTPRegister() register.add_header('Application-Name',"SVN Monitor") register.add_notification("svnupdate",True) growl(register) def svn_update(self, author="Unknown", files=0): notice = gntp.GNTPNotice() notice.add_header('Application-Name',"SVN Monitor") notice.add_header('Notification-Name', "svnupdate") notice.add_header('Notification-Title',"SVN Commit") # notice.add_header('Notification-Icon',"") notice.add_header('Notification-Text',Msg) growl(notice) def growl(data): s = socket.socket(socket.AF_INET, socket.SOCK_STREAM) s.connect((self.host,self.port)) s.send(data) response = gntp.parse_gntp(s.recv(1024)) print response s.close() but when ever i try to use this class via the follwoing code i get 'NameError: global name 'growl' is not defined' from growlnotify import * n = notify() n.svn_update() any one has an idea what is going on here ? cheers nash

    Read the article

  • How to notify table-data change to a client program?

    - by JMSA
    Suppose I have an application that access data resident in a central DB server and more than one user access data from client machines networked with the DB server. Suppose two client machines are running a copy of the application and two users are accessing the same DB table. How can I automatically refresh the data on the GUI, that is being viewed by one client, as soon as a change is made by another client in the DB table-data? Which technology should be used to solve this particular scenario in .net? WCF?

    Read the article

  • CodePlex Daily Summary for Wednesday, December 29, 2010

    CodePlex Daily Summary for Wednesday, December 29, 2010Popular ReleasesDocX: DocX v1.0.0.11: Building Examples projectTo build the Examples project, download DocX.dll and add it as a reference to the project. OverviewThis version of DocX contains many bug fixes, it is a serious step towards a stable release. Added1) Unit testing project, 2) Examples project, 3) To many bug fixes to list here, see the source code change list history.Cosmos (C# Open Source Managed Operating System): 71406: This is the second release supporting the full line of Visual Studio 2010 editions. Changes since release 71246 include: Debug info is now stored in a single .cpdb file (which is a Firebird database) Keyboard input works now (using Console.ReadLine) Console colors work (using Console.ForegroundColor and .BackgroundColor)AutoLoL: AutoLoL v1.5.0: Added the all new Masteries Browser which replaces the Quick Open combobox AutoLoL will now attemt to create file associations for mastery (*.lolm) files Each Mastery Build can now contain keywords that the Masteries Browser will use for filtering Changed the way AutoLoL detects if another instance is already running Changed the format of the mastery files to allow more information stored in* Dialogs will now focus the Ok or Cancel button which allows the user to press Return to clo...Confree for Outlook: Confree for Outlook 1.0: Confree for OutlookFeaturesCreate a Claro/Telmex conference directly from Outlook (only works for Argentina). NotesBy now, only works with Claro/Telmex Argentina (if you are using http://simon.telmex.net.ar, we are good).Paint.NET PSD Plugin: 1.6.0: Handling of layer masks has been greatly improved. Improved reliability. Many PSD files that previously loaded in as garbage will now load in correctly. Parallelized loading. PSD files containing layer masks will load in a bit quicker thanks to the removal of the sequential bottleneck. Hidden layers are no longer made visible on save. Many thanks to the users who helped expose the layer masks problem: Rob Horowitz, M_Lyons10. Please keep sending in those bug reports and PSD repro files!Razor Templating Engine: Razor Templating Engine v1.2: Changes: ADDED: Standard namespaces imports for all templates: System, System.Collections.Generic, System.Linq (Changeset 5635) ADDED: Methods for Precompilation (Changeset 3283) CHANGED: Refactored precompilation to be exposed per-TemplateService. (Changeset 3440) CHANGED: Added more descriptive compilation exception message. (Changeset 3629) FIXED: Forced reference to Microsoft.CSharp to correct support for testing frameworks. (Changeset 3689) FIXED: Added support for nested anonymous obj...PhysicalMeasure C# library: PhysicalMeasure 1.0 Release 2010-12-28: PhysicalMeasure 1.0 Release 2010-12-28Facebook C# SDK: 4.1.1: From 4.1.1 Release: Authentication bug fix caused by facebook change (error with redirects in Safari) Authenticator fix, always returning true From 4.1.0 Release Lots of bug fixes Removed Dynamic Runtime Language dependencies from non-dynamic platforms. Samples included in release for ASP.NET, MVC, Silverlight, Windows Phone 7, WPF, WinForms, and one Visual Basic Sample Changed internal serialization to use Json.net BREAKING CHANGE: Canvas Session is no longer supported. Use Signed...MonitorWang: MonitorWang v1.0.5 (Growler): What's new?Added Growl Notification Finalisers - these are interceptor components that work exclusively with the Growl Publisher. These allow you to modify the Growl Notification just prior to it being sent by the publisher. You can inject custom logic to precisely control how the Growl Notification will appear; this includes changing the Growl Priority level and message text. I've created to two Growl Notification Finalisers - one allows you to change the Growl Notification Priorty based on ...Catel - WPF and Silverlight MVVM library: 1.0.0: And there it is, the final release of Catel, and it is no longer a beta version!EnhSim: EnhSim 2.2.7 ALPHA: 2.2.7 ALPHAThis release supports WoW patch 4.03a at level 85 To use this release, you must have the Microsoft Visual C++ 2010 Redistributable Package installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=A7B7A05E-6DE6-4D3A-A423-37BF0912DB84 To use the GUI you must have the .NET 4.0 Framework installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=9cfb2d51-5ff4-4491-b0e5-b386f32c0992 - Mongoose has bee...LINQ to Twitter: LINQ to Twitter Beta v2.0.19: Mono 2.8, Silverlight, OAuth, 100% Twitter API coverage, streaming, extensibility via Raw Queries, and added documentation. Bug fixes.Rocket Framework (.Net 4.0): Rocket Framework for Windows V 1.0.0: Architecture is reviewed and adjusted in a way so that I can introduce the Web version and WPF version of this framework next. - Rocket.Core is introduced - Controller button functions revisited and updated - DB is renewed to suite the implemented features - Create New button functionality is changed - Add Question Handling featuresFlickr Wallpaper Rotator (for Windows desktop): Wallpaper Flickr 1.1: Some minor bugfixes (mostly covering when network connection is flakey, so I discovered them all while at my parents' house for Christmas).NoSimplerAccounting: NoSimplerAccounting 6.0: -Fixed a bug in expense category report.NHibernate Mapping Generator: NHibernate Mapping Generator 2.0: Added support for Postgres (Thanks to Angelo)NewLife XCode: XCode v6.5.2010.1223 ????(????v3.5??): XCode v6.5.2010.1223 ????,??: NewLife.Core ??? NewLife.Net ??? XControl ??? XTemplate ????,??C#?????? XAgent ???? NewLife.CommonEnitty ??????(???,XCode??????) XCode?? ?????????,??????????????????,?????95% XCode v3.5.2009.0714 ??,?v3.5?v6.0???????????????,?????????。v3.5???????????,??????????????。 XCoder ??XTemplate?????????,????????XCode??? XCoder_Src ???????(????XTemplate????),??????????????????VivoSocial: VivoSocial 7.4.0: Please see changes: http://support.vivoware.com/project/ChangeLog.aspx?PROJID=48Umbraco CMS: Umbraco 4.6 Beta - codename JUNO: The Umbraco 4.6 beta (codename JUNO) release contains many new features focusing on an improved installation experience, a number of robust developer features, and contains more than 89 bug fixes since the 4.5.2 release. Improved installer experience Updated Starter Kits (Simple, Blog, Personal, Business) Beautiful, free, customizable skins included Skinning engine and Skin customization (see Skinning Documentation Kit) Default dashboards on install with hide option Updated Login t...ASP.NET MVC SiteMap provider: MvcSiteMapProvider 2.3.0: Using NuGet?MvcSiteMapProvider is also listed in the NuGet feed. Learn more... Like the project? Consider a donation!Donate via PayPal via PayPal. Release notesThis will be the last release targeting ASP.NET MVC 2 and .NET 3.5. MvcSiteMapProvider 3.0.0 will be targeting ASP.NET MVC 3 and .NET 4 Web.config setting skipAssemblyScanOn has been deprecated in favor of excludeAssembliesForScan and includeAssembliesForScan ISiteMapNodeUrlResolver is now completely responsible for generating th...New Projects42 Sight Holistic Data Warehousing on Microsoft SQL Server 2008: This project is the Holistic DW Template. Included are the 3 MS XL spreadsheet reporting models as described in the book Holistic Data Warehousing. This Template is multi-purpose and requires no modification other than you populating it according to the book examplesAndshev.OrmTools: Tools for generating SQL queries using LINQ. ORM framework is also planned to be implemented.BFG and Dice Roller: This solution will contain 2 concepts, the Dice Roller with hooks for extension into other applications, as well as a Personal Battlefleet Gothic Helper application to help manage, control, and smoothe the flow of BFG games. The BFG application will target the Phone 7 platform.BlondieODOS: its an osBluehat Community projetcts: Bluehat Community projetcts.C# - DBWrapper MySQL: Abro aqui a discussão para criarmos uma classe para manipular dados em MySQL.CardGame for Education: This project goal is to create a small Card Game and to teach the team members how to design, implement and how to use "real world" tools. Englishlearning: My test project!Faran Silver: Silverlight Controls Developed till now. Include: 1- Persian Date Input 2- Close-able Tab Item 3- Shamsi Date Convertergocodelibrary: This is my project.Id3Stuff: Project that throws together some nice id3 mass editing functionsInfoStrat.OakFx: OakFx by InfoStratinivi: iniviJJODESK: This little utility software written in Vb.net 2.0, allows you to : - switch IE proxy, - manage IP, - launch website, - launch other utilty tools , - launch and manage cmd, bat, vbs script. - and much more ..... First I wrote this tool for my personal use, because I work with several networks, and customer sites. I think many other software developpers have the same need. All parameters are customisable, and are store in an ini text file. And it can run on an USB stick. learn MVC: Just keeping all source code in one place. Thats all folksLJF.Utility: Utility?????Lucidity: Lucid WILDMixModes Synergy - The WPF Toolkit: MixModes Synergy 2010 is a complete toolset that simplifies user interface development in Windows Presentation Foundation based applications. Synergy includes rich user interface controls providing professional look and feel for your applications out of the box.Multi Targetted Rss Reader: A Multi Targetted Rss Reader demo that shows how to multi target your view model across different screens (WP7, Silverlight, WPF, Surface).Secure Batch Command Tool For Administrators: A command line tool that will help you to protect your passwords that you should provide in your batch files. This tool encrypt Dos commands and update the batch files in a way that keeps your batch file maintainable and easy to use.SharePoint 2010 Conditional Lookup Control: I created a "Conditional Lookup" control for SharePoint 2010. With this you can connect two lookup fields controls on list forms to fill the second control with values depending on the selected value in the first control. There is a demo inside.sql dot: Ease when making a connection to the sql serverwolisbetter: WOL is better!WP7PasswordsBackup: backup/sync client for windows phone 7 passwords app. ??????: ??????

    Read the article

  • CodePlex Daily Summary for Tuesday, December 28, 2010

    CodePlex Daily Summary for Tuesday, December 28, 2010Popular ReleasesMonitorWang: MonitorWang v1.0.5 (Growler): What's new?Added Growl Notification Finalisers - these are interceptor components that work exclusively with the Growl Publisher. These allow you to modify the Growl Notification just prior to it being sent by the publisher. You can inject custom logic to precisely control how the Growl Notification will appear; this includes changing the Growl Priority level and message text. I've created to two Growl Notification Finalisers - one allows you to change the Growl Notification Priorty based on ...Catel - WPF and Silverlight MVVM library: 1.0.0: And there it is, the final release of Catel, and it is no longer a beta version!Multicore Task Framework: MTF 1.0.2: Release 1.0.2 of Multicore Task Framework.EnhSim: EnhSim 2.2.7 ALPHA: 2.2.7 ALPHAThis release supports WoW patch 4.03a at level 85 To use this release, you must have the Microsoft Visual C++ 2010 Redistributable Package installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=A7B7A05E-6DE6-4D3A-A423-37BF0912DB84 To use the GUI you must have the .NET 4.0 Framework installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=9cfb2d51-5ff4-4491-b0e5-b386f32c0992 - Mongoose has bee...LINQ to Twitter: LINQ to Twitter Beta v2.0.19: Mono 2.8, Silverlight, OAuth, 100% Twitter API coverage, streaming, extensibility via Raw Queries, and added documentation. Bug fixes.Hammock for REST: Hammock v1.1.4: v1.1.4 ChangesOAuth fixes for post content handling, encoding, and url parameter doubling v1.1.3 ChangesAdded an event handler for use with retries Made improvements to OAuth for performance, plus additional fixes Added OAuth token refresh support Fixed memory leak in content streaming, and regression issue with async GET call response handling v1.1.2 ChangesAdded OAuth Echo native support and static helper methods on OAuthCredentials Fixes for multi-part stream writing and recovery...Rocket Framework (.Net 4.0): Rocket Framework for Windows V 1.0.0: Architecture is reviewed and adjusted in a way so that I can introduce the Web version and WPF version of this framework next. - Rocket.Core is introduced - Controller button functions revisited and updated - DB is renewed to suite the implemented features - Create New button functionality is changed - Add Question Handling featuresFxCop Integrator for Visual Studio 2010: FxCop Integrtor 1.1.0: New FeatureSearch violation information FxCop Integrator provides the violation search feature. You can find out specific violation information by simple search expression.Analyze with FxCop project file FxCop Integrator supports code analysis with FxCop project file. You can customize code analysis behavior (e.g. analyze specifid types only, use specific rules only, and so on). ImprovementImproved the code analysis result list to show more information (added Proejct and File column). Change...NoSimplerAccounting: NoSimplerAccounting 6.0: -Fixed a bug in expense category report.NHibernate Mapping Generator: NHibernate Mapping Generator 2.0: Added support for Postgres (Thanks to Angelo)NewLife XCode: XCode v6.5.2010.1223 ????(????v3.5??): XCode v6.5.2010.1223 ????,??: NewLife.Core ??? NewLife.Net ??? XControl ??? XTemplate ????,??C#?????? XAgent ???? NewLife.CommonEnitty ??????(???,XCode??????) XCode?? ?????????,??????????????????,?????95% XCode v3.5.2009.0714 ??,?v3.5?v6.0???????????????,?????????。v3.5???????????,??????????????。 XCoder ??XTemplate?????????,????????XCode??? XCoder_Src ???????(????XTemplate????),??????????????????MiniTwitter: 1.64: MiniTwitter 1.64 ???? ?? 1.63 ??? URL ??????????????VivoSocial: VivoSocial 7.4.0: Please see changes: http://support.vivoware.com/project/ChangeLog.aspx?PROJID=48Umbraco CMS: Umbraco 4.6 Beta - codename JUNO: The Umbraco 4.6 beta (codename JUNO) release contains many new features focusing on an improved installation experience, a number of robust developer features, and contains more than 89 bug fixes since the 4.5.2 release. Improved installer experience Updated Starter Kits (Simple, Blog, Personal, Business) Beautiful, free, customizable skins included Skinning engine and Skin customization (see Skinning Documentation Kit) Default dashboards on install with hide option Updated Login t...SSH.NET Library: 2010.12.23: This release includes some bug fixes and few new fetures. Fixes Allow to retrieve big directory structures ssh-dss algorithm is fixed Populate sftp file attributes New Features Support for passhrase when private key is used Support added for diffie-hellman-group14-sha1,diffie-hellman-group-exchange-sha256 and diffie-hellman-group-exchange-sha1 key exchange algorithms Allow to provide multiple key files for authentication Add support for "keyboard-interactive" authentication method...ASP.NET MVC SiteMap provider: MvcSiteMapProvider 2.3.0: Using NuGet?MvcSiteMapProvider is also listed in the NuGet feed. Learn more... Like the project? Consider a donation!Donate via PayPal via PayPal. Release notesThis will be the last release targeting ASP.NET MVC 2 and .NET 3.5. MvcSiteMapProvider 3.0.0 will be targeting ASP.NET MVC 3 and .NET 4 Web.config setting skipAssemblyScanOn has been deprecated in favor of excludeAssembliesForScan and includeAssembliesForScan ISiteMapNodeUrlResolver is now completely responsible for generating th...Media Companion: Media Companion 3.400: Extract the entire archive to a folder which has user access rights, eg desktop, documents etc. A manual is included to get you startedWindows Media Player GNTP Plugin: WMP-GNTP v1.0.5: This is the installer for WMP-GNTP. Install it to get the plugin on your system.Google Geo Kit: Static Google Map WinForm Control Nightly Build: 12/22/2010 MD5sum - b8118c9970d6dc9480fe7c41f042537f add event OnGMapNotDefined. When anything went wrong in StaticGmap internally and return null stream, this event will be firedSilverlight Sockets Sample: No binaries: Whole source code in a ZIP. Shame 'Source Code' tab isn't working, so I'll just upload a ZIP.New ProjectsAsfMojo: AsfMojo is an open source .NET ASF parsing library, providing support for parsing WMA audio and WMV video files. It offers classes to create streams from packet data within a media file, gather file statistics and extract audio segments or frame accurate still frames.asp.net ajax file manager: Features : Full Ajax Support security View Image Create folder Delete file & folder Copy file & folder Move file & folder multiple selection ( Ctrl + Select ) Easy installation and configuration Open source. compatible IE7,IE8,FF,Safari,Chrome http://www.filemanager.3ntar.netBoxNet: BoxNet is a opensource library which will provide possibility for Windows Phone 7 developers to integrate with DropBox.C# Sqlite For WP7: C# Sqlite Port for Windows phone 7 and possibly Silverlight 3, 4. The core engine was slightly modified to be used with IsolatedStorage and SqliteClient were ported by using missing codes from Mono project in order to maximize usability and portability from desktop.Comparison of Managed Compression Algorithms: Visual Studio 2010 Console Test Harness with samples of MiniLZO, QuickLz, SharpZipLib, iRolz and other managed compression classes. Tests compression of a 2MB Word file and shows timings. Useful in deciding what type of compression to use. Developers can easily add their own.Cypher Bot 2011: Cypher Bot 2011 Brings the word cipher to a whole new level. You can now easily open, save, print, and send ciphers. Make a short message or completly encrypt a document. The cipher is impossible to figure out unless you have the keyword and algorithm to solve it! Try it out!Directed Graph for .NET: This project presents a simple directed graph implementation for the .NET framework using C# language.DynamicAccess: DynamicAccess is a library to aid connecting DLR languages such as ironpython and ironruby to non-dynamic languages like managed C++. It also fills in some gaps in the current C# support of dynamic objects, such as member access by string and deletion of members or indexes.Euro for Windows XP: A simple tool and sample to change Estonian currency from Estonian Krone (kr) to Euro (€). Applies to all versions of Windows and from .NET 2.0 which is default build. The sample creates a custom locale and updates existing users through Registry.Excel PowerShell Console: An Excel AddIn to enable using PowerShell for Excel automation.fantastic: fantasticGomarket Toolbar: GoMarket FireFox toolbarjs: jsLiving Agile's Common Framework: This project is a collection of commonly used routines here at Living Agile. There are a lot of helpful extension methods, logging, configuration and threading utilities. All other Living Agile projects have a dependency on this project.MapWindow 4: MapWindow4 is a free windows GIS application and uses an ActiveX control at it's core that can be embedded into many applications that don't support .Net such as excel, access, visual basic 6, or other pre-.Net languages.Mdelete API: Delete all files and directores in windows shell. Support long path (less then 32000 chars) and network path (eg. \\server\share or \\127.0.0.1\share)OP-Code SyntaxEditor: OP-Code SyntaxEditor is a Windows Forms Control, similar to a multi-line TextBox, which syntax highlights text and provides some features for code editing.passion: passionSharpHighlighter: SharpHighlighter is an extension for Visual Studio; a fairly simple code highlighter for C# I made it for anyone who wants to download and learn how to create is own parser or Syntax Highlighter. This sample will highlight only C# classes and structs but it's quite extensible.Test Center Locator: Test center locator makes it easier to find closest toefl or Ielts test center

    Read the article

  • Can org.freedesktop.Notifications.CloseNotification(uint id) be triggered and invoked via DBus?

    - by george rowell
    ref: Close button on notify-osd? Bookmark: Can org.freedesktop.Notifications.CloseNotification(uint id) be triggered and invoked via DBus? Currently, this script dbus-monitor "interface='org.freedesktop.Notifications'" | \ grep --line-buffered "member=Notify" | \ sed -u -e 's/.*/killall notify-osd/g' | \ bash will kill all pending notifications. It would be better to finesse the specific target OSD notification to cancel, by using org.freedesktop.Notifications.CloseNotification(uint id). Is there an interface method that can put this on (in?) the DBus to fire when a particular notify event occurs? The method will need to get the notify PID to use as the argument for CloseNotification(uint id). Alternatively, qdbus org.freedesktop.Notifications \ /org/freedesktop/Notifications \ org.freedesktop.Notifications.CloseNotification(uint id) could be used from the shell, if the (uint id) argument could be determined. The actual command syntax would use an integer in place of (uint id). Perhaps a better question to ask first might be "How is the DBus address for a notification found?". In hindsight the previous question "How is the (uint id) for a notification found?" is rhetorical! This previous answer: http://askubuntu.com/a/186311/89468 provided details so either method below can be used: gdbus call --session --dest org.freedesktop.DBus \ --object-path / \ --method org.freedesktop.DBus.GetConnectionUnixProcessID :1.16 returning: (uint32 8957,) or qdbus --literal --session org.freedesktop.DBus / \ org.freedesktop.DBus.GetConnectionUnixProcessID :1.16 returning: 8957

    Read the article

  • Kernel panic when bringing up DRBD resource

    - by sc.
    I'm trying to set up two machines synchonizing with DRBD. The storage is setup as follows: PV - LVM - DRBD - CLVM - GFS2. DRBD is set up in dual primary mode. The first server is set up and running fine in primary mode. The drives on the first server have data on them. I've set up the second server and I'm trying to bring up the DRBD resources. I created all the base LVM's to match the first server. After initializing the resources with `` drbdadm create-md storage I'm bringing up the resources by issuing drbdadm up storage After issuing that command, I get a kernel panic and the server reboots in 30 seconds. Here's a screen capture. My configuration is as follows: OS: CentOS 6 uname -a Linux host.structuralcomponents.net 2.6.32-279.5.2.el6.x86_64 #1 SMP Fri Aug 24 01:07:11 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux rpm -qa | grep drbd kmod-drbd84-8.4.1-2.el6.elrepo.x86_64 drbd84-utils-8.4.1-2.el6.elrepo.x86_64 cat /etc/drbd.d/global_common.conf global { usage-count yes; # minor-count dialog-refresh disable-ip-verification } common { handlers { pri-on-incon-degr "/usr/lib/drbd/notify-pri-on-incon-degr.sh; /usr/lib/drbd/notify-emergency-reboot.sh; echo b /proc/sysrq-trigger ; reboot -f"; pri-lost-after-sb "/usr/lib/drbd/notify-pri-lost-after-sb.sh; /usr/lib/drbd/notify-emergency-reboot.sh; echo b /proc/sysrq-trigger ; reboot -f"; local-io-error "/usr/lib/drbd/notify-io-error.sh; /usr/lib/drbd/notify-emergency-shutdown.sh; echo o /proc/sysrq-trigger ; halt -f"; # fence-peer "/usr/lib/drbd/crm-fence-peer.sh"; # split-brain "/usr/lib/drbd/notify-split-brain.sh root"; # out-of-sync "/usr/lib/drbd/notify-out-of-sync.sh root"; # before-resync-target "/usr/lib/drbd/snapshot-resync-target-lvm.sh -p 15 -- -c 16k"; # after-resync-target /usr/lib/drbd/unsnapshot-resync-target-lvm.sh; } startup { # wfc-timeout degr-wfc-timeout outdated-wfc-timeout wait-after-sb become-primary-on both; wfc-timeout 30; degr-wfc-timeout 10; outdated-wfc-timeout 10; } options { # cpu-mask on-no-data-accessible } disk { # size max-bio-bvecs on-io-error fencing disk-barrier disk-flushes # disk-drain md-flushes resync-rate resync-after al-extents # c-plan-ahead c-delay-target c-fill-target c-max-rate # c-min-rate disk-timeout } net { # protocol timeout max-epoch-size max-buffers unplug-watermark # connect-int ping-int sndbuf-size rcvbuf-size ko-count # allow-two-primaries cram-hmac-alg shared-secret after-sb-0pri # after-sb-1pri after-sb-2pri always-asbp rr-conflict # ping-timeout data-integrity-alg tcp-cork on-congestion # congestion-fill congestion-extents csums-alg verify-alg # use-rle protocol C; allow-two-primaries yes; after-sb-0pri discard-zero-changes; after-sb-1pri discard-secondary; after-sb-2pri disconnect; } } cat /etc/drbd.d/storage.res resource storage { device /dev/drbd0; meta-disk internal; on host.structuralcomponents.net { address 10.10.1.120:7788; disk /dev/vg_storage/lv_storage; } on host2.structuralcomponents.net { address 10.10.1.121:7788; disk /dev/vg_storage/lv_storage; } /var/log/messages is not logging anything about the crash. I've been trying to find a cause of this but I've come up with nothing. Can anyone help me out? Thanks.

    Read the article

  • Convert C# event handling to VB.NET

    - by Quandary
    Question: The following C# code: public event RemoteAPI.NotifyCallback Notify { add { s_notify = value; } remove { Console.WriteLine("TODO : Notify remove."); } } How do I convert this to VB.NET ? It implements an interface: Public Interface ICallsToServer ''' <summary> ''' Function to call the server from the client ''' </summary> ''' <param name="n">Some number</param> ''' <returns>Some interesting text</returns> Function SomeSimpleFunction(ByVal n As Integer) As String ''' <summary> ''' Add or remove callback destinations on the client ''' </summary> Event Notify As NotifyCallback End Interface The VB.NET automatically generated code was: Public Event Notify(ByVal s As String) Implements RemoteAPI.ICallsToServer.Notify

    Read the article

  • In jquery Set a delay to fade out or fadeout right away on click

    - by JClu
    I am trying to right a script for a notification popup. I wan't the popup to fade out after X seconds or fadeout when the user clicks on the message. I can get both effects to work individually but when I try to combine them fadeOut works. This is my code so far: function notify(data, type) { switch(type) { case "success": $('#notify').html(data) .removeAttr("style") .addClass('notifySuccess') .click(function() { $("#notify").fadeOut(); }) .delay(5000).fadeOut(); break; case "error": $('#notify').html(data) .removeAttr("style") .addClass('notifyFailure') .click(function() { $("#notify").fadeOut(); }) .delay(5000).fadeOut(); break; } }

    Read the article

  • problem in jquery with showing pop message on submit form

    - by user1400
    hi guys in my application on php i use of 'jQuery Notify Bar' plugin for display messages, i'd like to show message when my form submit(in edit page) ,the other page(index page) is opened and notify bar be open until the other page(index page) is completely load and even some second more but the problem is that notify bar show for short Moment and when the index page begin to load , notify bar is closed, and the delay property is not effect to that $('#myForm').submit(function(){ $.notifyBar({ html: "Thank you, your settings were updated!", **delay: 20000,** animationSpeed: "normal" }); how to show notify bar in the other page too? thanks

    Read the article

  • i don't receive mail notification...Nagios Core 4

    - by alessio
    I have a problem with automatically mail notification in Nagios Core 4 installed on ubuntu 12 .04 lts server... i have tried to send mail with nagios user and root user with the command: echo "test" | mail -s "test mail" [email protected] and i received mail correctly... but i don't receive any automatically mail notification... i don't know how can i do to resolve this issue! :( these are my configuration files (commands.cfg, contacts.cfg, nagios.log, mail.log): commands.cfg (the path /usr/bin/mail is the right path): # 'notify-host-by-email' command definition define command{ command_name notify-host-by-email command_line /usr/bin/printf "%b" "***** Nagios *****\n\nNotification Type: $NOTIFICATIONTYPE$\nHost: $HOSTNAME$\nState: $HOSTSTATE$\nAddress: $HOSTADDRESS$\nInfo: $HOSTOUTPUT$\n\nDate/Time: $LONGDATETIME$\n" | /usr/bin/mail -s "** $NOTIFICATIONTYPE$ Host Alert: $HOSTNAME$ is $HOSTSTATE$ **" $CONTACTEMAIL$ } # 'notify-service-by-email' command definition define command{ command_name notify-service-by-email command_line /usr/bin/printf "%b" "***** Nagios *****\n\nNotification Type: $NOTIFICATIONTYPE$\n\nService: $SERVICEDESC$\nHost: $HOSTALIAS$\nAddress: $HOSTADDRESS$\nState: $SERVICESTATE$\n\nDate/Time: $LONGDATETIME$\n\nAdditional Info:\n\n$SERVICEOUTPUT$\n" | /usr/bin/mail -s "** $NOTIFICATIONTYPE$ Service Alert: $HOSTALIAS$/$SERVICEDESC$ is $SERVICESTATE$ **" $CONTACTEMAIL$ } # 'process-host-perfdata' command definition define command{ command_name process-host-perfdata command_line /usr/bin/printf "%b" "$LASTHOSTCHECK$\t$HOSTNAME$\t$HOSTSTATE$\t$HOSTATTEMPT$\t$HOSTSTATETYPE$\t$HOSTEXECUTIONTIME$\t$HOSTOUTPUT$\t$HOSTPERFDATA$\n" >> /usr/local/nagios/var/host-perfdata.out } # 'process-service-perfdata' command definition define command{ command_name process-service-perfdata command_line /usr/bin/printf "%b" "$LASTSERVICECHECK$\t$HOSTNAME$\t$SERVICEDESC$\t$SERVICESTATE$\t$SERVICEATTEMPT$\t$SERVICESTATETYPE$\t$SERVICEEXECUTIONTIME$\t$SERVICELATENCY$\t$SERVICEOUTPUT$\t$SERVICEPERFDATA$\n" >> /usr/local/nagios/var/service-perfdata.out } contacts.cfg: define contact{ contact_name supporto alias Supporto Clienti DEA service_notification_period 24x7 host_notification_period 24x7 service_notification_options w,u,c,r host_notification_options d,r service_notification_commands notify-service-by-email host_notification_commands notify-host-by-email email [email protected] } define contactgroup{ contactgroup_name admins alias Nagios Administrators members supporto } nagios.log: [1401871412] SERVICE ALERT: fileserver;Current Users;OK;SOFT;2;USERS OK - 1 users currently logged in [1401871953] SERVICE ALERT: backups;Nagios Status;WARNING;SOFT;1;NAGIOS WARNING: 36 processes, status log updated 541 seconds ago [1401872133] SERVICE ALERT: backups;Nagios Status;OK;SOFT;2;NAGIOS OK: 36 processes, status log updated 180 seconds ago [1401872321] SERVICE ALERT: posta;Swap Usage;CRITICAL;SOFT;1;CRITICAL - Plugin timed out after 10 seconds [1401872322] SERVICE ALERT: fileserver;Current Users;CRITICAL;SOFT;1;CRITICAL - Plugin timed out after 10 seconds [1401872420] SERVICE ALERT: archivio;Disk Space;CRITICAL;SOFT;1;CRITICAL - Plugin timed out after 10 seconds [1401872492] SERVICE ALERT: fileserver;Current Users;OK;SOFT;2;USERS OK - 1 users currently logged in [1401872492] SERVICE ALERT: posta;Swap Usage;OK;SOFT;2;SWAP OK: 100% free (1984 MB out of 1984 MB) [1401872590] SERVICE ALERT: archivio;Disk Space;OK;SOFT;2;DISK OK [1401872931] Auto-save of retention data completed successfully. [1401873333] SERVICE ALERT: backups;Nagios Status;WARNING;SOFT;1;NAGIOS WARNING: 36 processes, status log updated 402 seconds ago [1401873513] SERVICE ALERT: backups;Nagios Status;OK;SOFT;2;NAGIOS OK: 36 processes, status log updated 180 seconds ago mail.log (i think that the problem is here but i don't know how to resolve it): Jun 4 10:00:01 backups sm-msp-queue[6109]: My unqualified host name (backups) unknown; sleeping for retry Jun 4 10:01:01 backups sm-msp-queue[6109]: unable to qualify my own domain name (backups) -- using short name Jun 4 10:20:01 backups sm-msp-queue[7247]: My unqualified host name (backups) unknown; sleeping for retry Jun 4 10:21:01 backups sm-msp-queue[7247]: unable to qualify my own domain name (backups) -- using short name Jun 4 10:40:01 backups sm-msp-queue[8327]: My unqualified host name (backups) unknown; sleeping for retry Jun 4 10:41:01 backups sm-msp-queue[8327]: unable to qualify my own domain name (backups) -- using short name Jun 4 11:00:01 backups sm-msp-queue[9549]: My unqualified host name (backups) unknown; sleeping for retry Jun 4 11:01:01 backups sm-msp-queue[9549]: unable to qualify my own domain name (backups) -- using short name Jun 4 11:20:01 backups sm-msp-queue[10678]: My unqualified host name (backups) unknown; sleeping for retry Jun 4 11:21:01 backups sm-msp-queue[10678]: unable to qualify my own domain name (backups) -- using short name i'm at the last step and i want to finish this Nagios Core! :) Any help be appreciate!:) host definition (this host have the disk almost full and it is in hard state but non notification) : define host{ use generic-host ; Name of host template to use host_name posta alias Server Posta ESA address 10.10.2.102 parents xen1, xen2 icon_image redhat.png statusmap_image redhat.gd2 } service definition: define service{ use generic-service host_name xen1, maestro, xen2, posta, nas002, serv2, esasrvmi02, esaubuntumi service_description Disk Space check_command ssh_all_disks!10%!5% } Notification is allowed for the contact definition you gave, but is it also allowed at the the service level ? sorry but i don't understand this thing! :(

    Read the article

  • CRUD operations; do you notify whether the insert,update etc. went well ?

    - by danielovich
    Hi guys. I have a simple question for you (i hope) :) I have pretty much always used void as a "return" type when doing CRUD operations on data. Eg. Consider this code: public void Insert(IAuctionItem item) { if (item == null) { AuctionLogger.LogException(new ArgumentNullException("item is null")); } _dataStore.DataContext.AuctionItems.InsertOnSubmit((AuctionItem)item); _dataStore.DataContext.SubmitChanges(); } and then considen this code: public bool Insert(IAuctionItem item) { if (item == null) { AuctionLogger.LogException(new ArgumentNullException("item is null")); } _dataStore.DataContext.AuctionItems.InsertOnSubmit((AuctionItem)item); _dataStore.DataContext.SubmitChanges(); return true; } It actually just comes down to whether you should notify that something was inserted (and went well) or not ?

    Read the article

  • Nagios - NagWin - Send notification with gmail

    - by Attila Bujáki
    I would like to send Nagios notifications using my gmail account. I have already set up my hosts I want to monitor and services also. What is the most simple way to accomplish this using NagWin on a Windows Server 2012 installation? As far as I know I must change some of these configuration settings: # 'notify-host-by-email' command definition define command{ command_name notify-host-by-email command_line /usr/bin/printf "%b" "***** Nagios *****\n\nNotification Type: $NOTIFICATIONTYPE$\nHost: $HOSTNAME$\nState: $HOSTSTATE$\nAddress: $HOSTADDRESS$\nInfo: $HOSTOUTPUT$\n\nDate/Time: $LONGDATETIME$\n" | /bin/blat - -to $CONTACTEMAIL$ -f nagios@localhost -subject "** $NOTIFICATIONTYPE$ Host Alert: $HOSTNAME$ is $HOSTSTATE$ **" -server ??? } # 'notify-service-by-email' command definition define command{ command_name notify-service-by-email command_line /usr/bin/printf "%b" "***** Nagios *****\n\nNotification Type: $NOTIFICATIONTYPE$\n\nService: $SERVICEDESC$\nHost: $HOSTALIAS$\nAddress: $HOSTADDRESS$\nState: $SERVICESTATE$\n\nDate/Time: $LONGDATETIME$\n\nAdditional Info:\n\n$SERVICEOUTPUT$\n" | /bin/blat - -to $CONTACTEMAIL$ -f nagios@localhost -subject "** $NOTIFICATIONTYPE$ Service Alert: $HOSTALIAS$/$SERVICEDESC$ is $SERVICESTATE$ **" -server ??? } What should I use for smtp server? Is it possible to directly send my notifications to the Gmail server?

    Read the article

  • Setting up autotest with rspec in ubuntu

    - by Reactor5
    I'm trying to set up autotest on Ubuntu, and no matter what my configuration, I get this: loading autotest/rails_rspec2 style: RailsRspec2 /home/brian/.rvm/gems/ruby-1.9.2-rc2@rails3tutorial/gems/redgreen-1.2.2/lib/redgreen/autotest.rb:6:in `<top (required)>': uninitialized constant Object::PLATFORM (NameError) the .autotest (~/.autotest) file I have is as follows: #!/usr/bin/env ruby require 'redgreen/autotest' def self.notify title, msg, img, pri='low', time=3000 `notify-send -i #{img} -u #{pri} -t #{time} '#{msg}'` end Autotest.add_hook :ran_command do |at| results = [at.results].flatten.join("\n") output = results.slice(/(\d+)\s+examples?,\s*(\d+)\s+failures?(,\s*(\d+)\s+not implemented)?(,\s*(\d+)\s+pending)?/) folder = "~/Pictures/autotest/" if output =~ /([123456789]|[\d]{2,})\sfailures?/ notify "FAIL:", "#{output}", folder+"rails_fail.png", 'critical', 10000 elsif output =~ /[1-9]\d*\spending?/ notify "PENDING:", "#{output}", folder+"rails_pending.png", 'normal', 10000 else notify "PASS:", "#{output}", folder+"rails_ok.png" end end what am I doing wrong here?

    Read the article

  • Getting some perl script errors on execution of svnnotify

    - by user2474633
    I installed svnnotify:2.84, perl module 5.10 for subversion 1.7.11 on redhat release 6. And i am using this command in post-commit hooks to get notified svnnotify --repos-path "$1" --revision "$2" --from [email protected] \ --to-regex-map [email protected]="branches/Test_branch12" \ --smtp xxxxxx.com HTML::ColorDiff >> /tmp/notify.txt 2>&1 once the commit is successful i can see the below mentioned error in the output file. Use of uninitialized value $[0] in exec at /usr/local/share/perl5/SVN/Notify.pm line 2332. Can't exec "": No such file or directory at /usr/local/share/perl5/SVN/Notify.pm line 2332. Use of uninitialized value $[0] in concatenation (.) or string at /usr/local/share/perl5/SVN/Notify.pm line 2332. Cannot exec : No such file or directory Child process exited: 512 Can anyone help on this.

    Read the article

  • CodePlex learns to talk to other services!

    CodePlex is now able to talk to other services! For example, if you want CodePlex to tell Trello to update cards on your Trello board, it can do it. Or if you want CodePlex to notify your Campfire chat room when updates are pushed, it can do that too. To start off, we are going to be adding support for the following services: Campfire – Notify a Campfire chat room when commits occur HipChat – Notify a HipChat chat room when commits occur Trello – Add commit summaries to Trello cards by referencing those cards in commit messages Twitter – Notify your Twitter followers when updates are pushed to your project In addition, we will continue to support our existing integrations with Windows Azure – Continuously deploy to Windows Azure on pushes (For Git and Hg projects) AppHarbor – Continuously deploy to AppHarbor on pushes To set up these integrations for your project, navigate to the project settings page as a project coordinator, and click on the services section as seen below:   While we are starting with these six services, the infrastructure is now in place to allow us to quickly roll out new integrations. We would love to hear which services and integrations you would like to see most on our suggestions page. We realize that there are some services and URLs that only make sense for your project to send notifications to. To support this scenario, we plan to add generic web hooks in the near future. Have ideas on how to improve CodePlex? Please visit our suggestions page! Vote for existing ideas or submit a new one. As always you can reach out to the CodePlex team on Twitter @codeplex or reach me directly @Rick_Marron.    

    Read the article

  • Qt : crash due to delete (trying to handle exceptions...)

    - by Seub
    I am writing a program with Qt, and I would like it to show a dialog box with a Exit | Restart choice whenever an error is thrown somewhere in the code. What I did causes a crash and I really can't figure out why it happens, I was hoping you could help me understanding what's going on. Here's my main.cpp: #include "my_application.hpp" int main(int argc, char *argv[]) { std::cout << std::endl; My_Application app(argc, argv); return app.exec(); } And here's my_application:hpp: #ifndef MY_APPLICATION_HPP #define MY_APPLICATION_HPP #include <QApplication> class Window; class My_Application : public QApplication { public: My_Application(int& argc, char ** argv); virtual ~My_Application(); virtual bool notify(QObject * receiver, QEvent * event); private: Window *window_; void exit(); void restart(); }; #endif // MY_APPLICATION_HPP Finally, here's my_application.cpp: #include "my_application.hpp" #include "window.hpp" #include <QMessageBox> My_Application::My_Application(int& argc, char ** argv) : QApplication(argc, argv) { window_ = new Window; window_->setAttribute(Qt::WA_DeleteOnClose, false); window_->show(); } My_Application::~My_Application() { delete window_; } bool My_Application::notify(QObject * receiver, QEvent * event) { try { return QApplication::notify(receiver, event); } catch(QString error_message) { window_->setEnabled(false); QMessageBox message_box; message_box.setWindowTitle("Error"); message_box.setIcon(QMessageBox::Critical); message_box.setText("The program caught an unexpected error:"); message_box.setInformativeText("What do you want to do? <br>"); QPushButton *restart_button = message_box.addButton(tr("Restart"), QMessageBox::RejectRole); QPushButton *exit_button = message_box.addButton(tr("Exit"), QMessageBox::RejectRole); message_box.setDefaultButton(restart_button); message_box.exec(); if ((QPushButton *) message_box.clickedButton() == exit_button) { exit(); } else if ((QPushButton *) message_box.clickedButton() == restart_button) { restart(); } } return false; } void My_Application::exit() { window_->close(); //delete window_; return; } void My_Application::restart() { window_->close(); //delete window_; window_ = new Window; window_->show(); return; } Note that the line window_->setAttribute(Qt::WA_DeleteOnClose, false); means that window_ (my main window) won't be deleted when it is closed. The code I've written above works, but as far as I understand, there's a memory leak: I should uncomment the line //delete window_; in My_Application::exit() and My_Application::restart(). But when I do that, the program crashes when I click restart (or exit but who cares). (I'm not sure this is useful, in fact it might be misleading, but here's what my debugger tells me: a segmentation fault occurs in QWidgetPrivate::PaintOnScreen() const which is called by a function called by a function... called by My_Application::notify()) When I do some std::couts, I notice that the program runs through the entire restart() function and in fact through the entire notify() function before it crashes. I have no idea why it crashes. Thanks in advance for your insights! Update: I've noticed that My_Application::notify() is called very often. For example, it is called a bunch of times while the error dialog box is open, also during the execution of the restart function. The crash actually occurs in the subfunction QApplication::notify(receiver, event). This is not too surprising in light of the previous remark (the receiver has probably been deleted) But even if I forbid the function My_Application::notify() to do anything while restart() is executed, it still crashes (after having called My_Application::notify() a bunch of times, like 15 times, isn't that weird)? How should I proceed? Maybe I should say (to make the question slightly more relevant) that my class My_Application also has a "restore" function, which I've not copied here to try to keep things short. If I just had that restart feature I wouldn't bother too much, but I do want to have that restore feature. I should also say that if I keep the code with the "delete window_" commented, the problem is not only a memory leak, it still crashes sometimes apparently. There must surely be a way to fix this! But I'm clueless, I'd really appreciate some help! Thanks in advance.

    Read the article

  • how to notify a program of another program? dll? directory? path?

    - by Brady Trainor
    I am trying to experiment with GNUS email in Emacs, in Windows (EDIT: x64 bit). I've got it to work in Ubuntu, but struggling with it in Windows. From http://www.gnu.org/software/emacs/manual/html_mono/emacs-gnutls.html#Help-For-Users I read in second paragraph: This is a little bit trickier on the W32 (Windows) platform, but if you have the GnuTLS DLLs (available from http://sourceforge.net/projects/ezwinports/files/ thanks to Eli Zaretskii) in the same directory as Emacs, you should be OK. I have downloaded and unzipped the gnutls-3.0.9-w32-bin package, but am not sure what to do with it. I have tried putting it in Program Files (x86), which is "the same directory as Emacs". I have tried putting it in the emacs-24.3 folder. I consider merging all the folders in between the two, but am hesitant as that seems a difficult troubleshoot attempt compared to my knowledge on these matters. I think Emacs needs to somehow see the gnutls binaries and/or dlls. My knowledge is limited on this. I've also struggled to understand PATHs for sometime now, and am not sure if that approach is relevant here. FYI, the emacs directory contains folders labeled bin, etc, info, leim, lisp and site-lisp. The gnutls directory contains folder labeled bin, include, lib and share. Hmm, now I'm finding lots of links on adding paths. Still, I'm skeptical that I would only add gnutls.exe path, as it seems the dlls are needed. Some additional data for Ramhound's first comment I have been attempting the (require 'gnutls) route. This seems to be the most relevant parts in the log: Opening connection to imap.gmail.com via tls... gnutls.c: [1] (Emacs) GnuTLS library not found Opening TLS connection to `imap.gmail.com'... Opening TLS connection with `gnutls-cli --insecure -p 993 imap.gmail.com'...failed Opening TLS connection with `gnutls-cli --insecure -p 993 imap.gmail.com --protocols ssl3'...failed Opening TLS connection with `openssl s_client -connect imap.gmail.com:993 -no_ssl2 -ign_eof'...failed Opening TLS connection to `imap.gmail.com'...failed I am not sure what "in stallion" means. Emacs seems to have installed itself in program files (x86), so I assume it is 32 bit. I can try and figure out how to double check, but did not realize I would get such fast response time, and am headed out right now. I will try merging the files later tonight?

    Read the article

  • How to switch 'default' sound device controlled by hardware keys in Xubuntu?

    - by Ruth
    I installed xubuntu-desktop on a 12.04 Ubuntu upgrade after finding Gnome3 lacking. I've mostly been happy, but I've found an odd and frustrating bug. My laptop has two sound 'outputs' - an HDMI-out plug I never use, and the onboard speakers/headphones. For some reason, the hardware keys have been mapped to the HDMI output, even if I set it as 'fallback' in pavucontrol, and notify-osd only displays changes in the HDMI output (though the panel indicator volume control controls onboard sound). I'd ideally like both hardware keys and notify-osd to be looking at the onboard sound, though if I can't get notify-osd it's an acceptable loss. Having to click through a bunch of stuff to change volume is driving me crazy, though. Googling suggested that it /may/ be a Pulseaudio/ALSA conflict, but the hardware keys seem to change at least indicated volume in pavucontrol for HDMI as expected (I don't have an HDMI cable to test actual sound output)

    Read the article

  • custom libindicator icon is not displayed

    - by Christoph Sterz
    Hi there, I want to change the statusicon of my own little reminder program. Currently I am using GTK.StatusIcon but I want to use a ApplicationIndicator. Therefore I created an own Icon and moved it to: /usr/share/icons/ubuntu-mono-dark/status/22 It is named indicator-notify.svg Heres the code for the icon. ind = appindicator.Indicator ("notify", "indicator-notify", appindicator.CATEGORY_APPLICATION_STATUS) ind.set_status (appindicator.STATUS_ACTIVE) This Icon is not displayed. Although every other icon from this folder is. What did I miss? Is there maybe the need to "register" the icon in GTK ?

    Read the article

  • Error accessing Gio.Gsettings on application made in quickly

    - by Zane Swafford
    I am trying to develop an application using the quickly/pygtk stack. I got my Gsettings schemas all set up in ~/app-name-here/data/glib-2.0/schemas/net.launchpad.app-name-here.gschema.xml correctly and I am able to access it just fine in my preferences dialog window that is located in ~/app-name-here/app-name-here/PreferencesDialog.py via from gi.repository import Gtk, Gio settings = Gio.Settings("net.launchpad.app-name-here") settings.get_boolean('notify') settings.set_boolean('notify', True) but when I try to check the value of one of my settings in a file located in ~/app-name-here/bin/Daemon.py that I use as a script to run in the background and send notifications by a similar method of from gi.repository import Gio settings = Gio.Settings("net.launchpad.app-name-here") settings.get_boolean('notify') it fails at the line that says settings = Gio.Settings("net.launchpad.app-name-here") and spits out a nasty error (Daemon.py:26100): GLib-GIO-ERROR **: Settings schema 'net.launchpad.app-name-here' is not installed Despite the fact that I can open up dconf-editor and find the settings under net/launchpad/app-name-here. Any thoughts?

    Read the article

  • Problem with room/screen/menu controller in python game: old rooms are not removed from memory

    - by Jordan Magnuson
    I'm literally banging my head against a wall here (as in, yes, physically, at my current location, I am damaging my cranium). Basically, I've got a Python/Pygame game with some typical game "rooms", or "screens." EG title screen, high scores screen, and the actual game room. Something bad is happening when I switch between rooms: the old room (and its various items) are not removed from memory, or from my event listener. Not only that, but every time I go back to a certain room, my number of event listeners increases, as well as the RAM being consumed! (So if I go back and forth between the title screen and the "game room", for instance, the number of event listeners and the memory usage just keep going up and up. The main issue is that all the event listeners start to add up and really drain the CPU. I'm new to Python, and don't know if I'm doing something obviously wrong here, or what. I will love you so much if you can help me with this! Below is the relevant source code. Complete source code at http://www.necessarygames.com/my_games/betraveled/betraveled_src0328.zip MAIN.PY class RoomController(object): """Controls which room is currently active (eg Title Screen)""" def __init__(self, screen, ev_manager): self.room = None self.screen = screen self.ev_manager = ev_manager self.ev_manager.register_listener(self) self.room = self.set_room(config.room) def set_room(self, room_const): #Unregister old room from ev_manager if self.room: self.room.ev_manager.unregister_listener(self.room) self.room = None #Set new room based on const if room_const == config.TITLE_SCREEN: return rooms.TitleScreen(self.screen, self.ev_manager) elif room_const == config.GAME_MODE_ROOM: return rooms.GameModeRoom(self.screen, self.ev_manager) elif room_const == config.GAME_ROOM: return rooms.GameRoom(self.screen, self.ev_manager) elif room_const == config.HIGH_SCORES_ROOM: return rooms.HighScoresRoom(self.screen, self.ev_manager) def notify(self, event): if isinstance(event, ChangeRoomRequest): if event.game_mode: config.game_mode = event.game_mode self.room = self.set_room(event.new_room) #Run game def main(): pygame.init() screen = pygame.display.set_mode(config.screen_size) ev_manager = EventManager() spinner = CPUSpinnerController(ev_manager) room_controller = RoomController(screen, ev_manager) pygame_event_controller = PyGameEventController(ev_manager) spinner.run() EVENT_MANAGER.PY class EventManager: #This object is responsible for coordinating most communication #between the Model, View, and Controller. def __init__(self): from weakref import WeakKeyDictionary self.last_listeners = {} self.listeners = WeakKeyDictionary() self.eventQueue= [] self.gui_app = None #---------------------------------------------------------------------- def register_listener(self, listener): self.listeners[listener] = 1 #---------------------------------------------------------------------- def unregister_listener(self, listener): if listener in self.listeners: del self.listeners[listener] #---------------------------------------------------------------------- def clear(self): del self.listeners[:] #---------------------------------------------------------------------- def post(self, event): # if isinstance(event, MouseButtonLeftEvent): # debug(event.name) #NOTE: copying the list like this before iterating over it, EVERY tick, is highly inefficient, #but currently has to be done because of how new listeners are added to the queue while it is running #(eg when popping cards from a deck). Should be changed. See: http://dr0id.homepage.bluewin.ch/pygame_tutorial08.html #and search for "Watch the iteration" print 'Number of listeners: ' + str(len(self.listeners)) for listener in list(self.listeners): #NOTE: If the weakref has died, it will be #automatically removed, so we don't have #to worry about it. listener.notify(event) def notify(self, event): pass #------------------------------------------------------------------------------ class PyGameEventController: """...""" def __init__(self, ev_manager): self.ev_manager = ev_manager self.ev_manager.register_listener(self) self.input_freeze = False #---------------------------------------------------------------------- def notify(self, incoming_event): if isinstance(incoming_event, UserInputFreeze): self.input_freeze = True elif isinstance(incoming_event, UserInputUnFreeze): self.input_freeze = False elif isinstance(incoming_event, TickEvent) or isinstance(incoming_event, BoardCreationTick): #Share some time with other processes, so we don't hog the cpu pygame.time.wait(5) #Handle Pygame Events for event in pygame.event.get(): #If this event manager has an associated PGU GUI app, notify it of the event if self.ev_manager.gui_app: self.ev_manager.gui_app.event(event) #Standard event handling for everything else ev = None if event.type == QUIT: ev = QuitEvent() elif event.type == pygame.MOUSEBUTTONDOWN and not self.input_freeze: if event.button == 1: #Button 1 pos = pygame.mouse.get_pos() ev = MouseButtonLeftEvent(pos) elif event.type == pygame.MOUSEBUTTONDOWN and not self.input_freeze: if event.button == 2: #Button 2 pos = pygame.mouse.get_pos() ev = MouseButtonRightEvent(pos) elif event.type == pygame.MOUSEBUTTONUP and not self.input_freeze: if event.button == 2: #Button 2 Release pos = pygame.mouse.get_pos() ev = MouseButtonRightReleaseEvent(pos) elif event.type == pygame.MOUSEMOTION: pos = pygame.mouse.get_pos() ev = MouseMoveEvent(pos) #Post event to event manager if ev: self.ev_manager.post(ev) # elif isinstance(event, BoardCreationTick): # #Share some time with other processes, so we don't hog the cpu # pygame.time.wait(5) # # #If this event manager has an associated PGU GUI app, notify it of the event # if self.ev_manager.gui_app: # self.ev_manager.gui_app.event(event) #------------------------------------------------------------------------------ class CPUSpinnerController: def __init__(self, ev_manager): self.ev_manager = ev_manager self.ev_manager.register_listener(self) self.clock = pygame.time.Clock() self.cumu_time = 0 self.keep_going = True #---------------------------------------------------------------------- def run(self): if not self.keep_going: raise Exception('dead spinner') while self.keep_going: time_passed = self.clock.tick() fps = self.clock.get_fps() self.cumu_time += time_passed self.ev_manager.post(TickEvent(time_passed, fps)) if self.cumu_time >= 1000: self.cumu_time = 0 self.ev_manager.post(SecondEvent(fps=fps)) pygame.quit() #---------------------------------------------------------------------- def notify(self, event): if isinstance(event, QuitEvent): #this will stop the while loop from running self.keep_going = False EXAMPLE CLASS USING EVENT MANAGER class Timer(object): def __init__(self, ev_manager, time_left): self.ev_manager = ev_manager self.ev_manager.register_listener(self) self.time_left = time_left self.paused = False def __repr__(self): return str(self.time_left) def pause(self): self.paused = True def unpause(self): self.paused = False def notify(self, event): #Pause Event if isinstance(event, Pause): self.pause() #Unpause Event elif isinstance(event, Unpause): self.unpause() #Second Event elif isinstance(event, SecondEvent): if not self.paused: self.time_left -= 1

    Read the article

< Previous Page | 2 3 4 5 6 7 8 9 10 11 12 13  | Next Page >