Search Results

Search found 2436 results on 98 pages for 'hdd cloning'.

Page 6/98 | < Previous Page | 2 3 4 5 6 7 8 9 10 11 12 13  | Next Page >

  • Ubuntu Install 11.10 doesn't recognize Windows 7 installation with new HDD

    - by arlendo
    Replaced my crashed HDD with a Seagate 2TB Sata (bought from a company who pulled it from a working computer, OS unknown) and did a fresh install of Windows 7. Windows shows 100MB boot partition (bootable NTFS) and 200GB Windows partition (NTFS), the rest is unallocated. Win7 Disk Management says the partitioning type is Master Boot Record. Win7 boots and runs fine. Ubuntu 11.10 Install procedes to Allocate Drive Space screen and should say This computer currently has Windows 7 on it. What would you like to do? Instead, it says something like Install doesn't detect any existing OS on this computer. When I click on Something else, the partition table shows only the unallocated space of 1.8TB. Ubuntu Disk Utility says Partitioning: Master Boot Record, but GParted Live says Partition Table: gpt. It was my original intention to have the Windows boot partition and application partition, then install Ubuntu 11.10 using boot, root, swap, and home partitions, and maybe another partition just for data (mostly photos). Currently, I would be happy if I could just get Ubuntu installed along with Win7. I am aware of the MBR limits of 3 Primary partitions and 1 Extended partition. I suspect that my new HDD is partitioned for GPT and that is why Ubuntu can't see the Win7 installation. Am I on the right track? I was going to use Windows Disk Management to convert GPT to MBR but I only have the one drive on my AMD-64 mini-computer and it says I have to empty the drive of all partitions before I can access the Convert command. And I can't find any bootable software that would allow me to do that conversion. Here is the result of sudo fdisk -l: ubuntu@ubuntu:~$ sudo fdisk -l WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 2000.4 GB, 2000398934016 bytes 224 heads, 19 sectors/track, 918004 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xd4a68c18 Device Boot Start End Blocks Id System /dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sda2 206848 419637247 209715200 7 HPFS/NTFS/exFAT ubuntu@ubuntu:~$ Keep in mind that I'm a definite newbie to screwing around with the inner workings of Ubuntu. I previously had Ubuntu 10.04 running with Vista and I don't remember even having to partition anything that wasn't automatic in the install. Thanks for taking a look here. My Win7 is running fine but I miss my Ubuntu.

    Read the article

  • How do I set up multiple HDD?

    - by mark kirby
    I got some new hard discs and would like to set my PC up in the following way: Ubuntu is currently installed on one drive I want to put Windows on a second drive I would like a third drive for shared content (music and stuff) that both OSes can access What I need to know is what format should the content drive be? How should I configure the drive order in my bios for GRUB to be boot manager and how to configure GRUB for multi-HDD booting?

    Read the article

  • Step by step guide to partition an external HDD in two file formats

    - by Mysterio
    I just purchased an external HDD (1TB) which I want to partition with two different file formats - NTFS and FAT32 (this partition is for my PS3 backups). At the moment it's a giant 943mb NTFS partition and at the end of the operation I want it to be like: 643 MB NTFS partition (as my main partition) 300 MB FAT32 partition (to house my PS3 backups) Please can someone help me out? Thanks in advance.

    Read the article

  • switch HDD in laptop

    - by jolly
    the internal hard drive that I have right now in my laptop is coming near its death, clicking for life, so I decided to buy a new HDD. However, I don't want to spend two weeks setting up my system to fit me as it does right now, so I thought that I can make just a hard copy of all the contents to the new disk (using dd). My question is: is it going to work? :-) What are the things that need to be changed, except fstab?

    Read the article

  • How does the process of disk partitioning actually work on most HDD's?

    - by Dark Templar
    From what I know of most laptops, you are able to "partition" your disk into as many other drives as you please. The more you cut it up, the smaller your partitions are, but from an organizational point of view, this may be desirable... I was wondering how the filesystem itself becomes partitioned underneath the partitions visible to the user. For instance, a laptop disk is usually divided into platters, each with two surfaces. The surfaces are further divided into "tracks". I guess what I am asking is, is it possible to identify how the disk itself keeps track of partitions? (whether each partition has its own platter? each partition has its own set of adjacent tracks? or some other configuration, or whether the data from different partitions are just randomly interleaved and scattered throughout the disk?)

    Read the article

  • Western Digital External 1TB HDD, possible to mount internally?

    - by JL
    I have an external WD MyBook. it has USB, Firewire and e-sata connectors, but I would like to mount it internally in my desktop system instead for extra performance, and I'm also considered about how long it will last externally. Does anyone know if this is possible? Has anyone done this with success? I would have to remove it from the existing external chasis, but before I mess around with this, I would like to know if its even possible. Thanks in advance

    Read the article

  • Bluescreen Stop 0x00000027 RDR_FILE_SYSTEM after cloning system on new HDD

    - by Daniel
    A couple of months ago I got a new 500GB HDD for my no-name-brand Laptop PC and I cloned the complete Win 7 Pro 32bit system with clonezilla from the old 70GB drive to the new one. At first everything was great, the new driver was immediately updated. But since then I get on a more and more frequent level (used to be every 2-3 days, but now it's more like 2-3 times a day) a BSOD Stop error. From the eventlog in Windows I know that there are two different error codes sppoking aroung: 0x00000027 (0xbaad0073, 0x9954f80c, 0x9954f3f0, 0x8ecd7c82) RDR_FILE_SYSTEM 0x00000044 (0x85443230, 0x00000eae, 0x00000000, 0x00000000) MULTIPLE_IRP_COMPLETE_REQUESTS I checked for viruses and did a complete HDD check using the Windows tool and WesternDigital tool (which is the producer of the new HDD) without results. I also looked for driver updates but couldn't find any. The name of the HDD as shown in the device manager is: WDC WD5000BPVT-00HXZT1 ATA Device. I'm really a noob regarding those kind of problems, so if you have any idea what I can try without losing all my data, let me know. Also, if any additional information are required.

    Read the article

  • UEFI Dual-Boot - Ubuntu 12.04.3 + Windows 8.1 (One GPT HDD)

    - by swafbrother
    UEFI Dual-Boot - Ubuntu 12.04.3 + Windows 8.1 (One GPT HDD) Hello, I'm having trouble setting up a dual-boot (Ubuntu 12.04 LTS and Windows 8.1) in my ASUS K55VM laptop's hard drive disk (500 GB). I was mostly following tutorials for doing this, but at some point something has gone wrong. Up to now, I have followed these steps: I formatted my HDD into GPT. I clean-installed Windows 8.1. I didn't prevent Windows from choosing the partitions to use and it created these partitions: A Recovery partition (sda1). An EFI System Partition (sda2). A Microsoft Reserved Partition (sda3). A Windows Data Partition or C drive (sda4). I reduced the Windows Data Partition via Windows' Disk Management. I made a bootable USB Stick with Ubuntu 12.04 LTS from ISO, using Universal USB Installer. I created these partitions for Ubuntu: A Boot partition, mounted at /boot (sda5). A Root partition, mounted at / (sda6). A Swap partition (sda7). In Device for boot loader installation I chose: /dev/sda. Then, when I rebooted, it went straight into Ubuntu. So I installed Boot-Repair, and clicked on Recommended Repair. It automatically did its job without asking for anything. I rebooted and Grub showed up, with a lot of options. At this point I had a decent dual-boot setup; Ubuntu and both Windows entries worked fine: Ubuntu. Windows Boot UEFI Loader. Windows UEFI bkpbootmgfw.efi. I executed this command: sudo grub-install --force /dev/sda5. Then I tried to make Windows 8.1's Boot Manager the main boot manager, so that I could choose which OS to boot into from a menu. I downloaded EasyBCD on Windows. It showed 2 Ubuntu entries and 1 Windows entry. I went into BCD Deployment tab and clicked on Write MBR. At this point, I went into BIOS and made Windows Boot Manager the first boot option. When I rebooted, I got a black screen with the message efidisk read error, and then (I guess) it switched to the next boot option, which is Ubuntu, resulting in Grub showing up. From Grub, Ubuntu entry is working and so are both Windows entries. If I choose Ubuntu, it normally boots into Ubuntu. But if I choose Windows, it goes into Windows' boot manager. In Windows' boot manager, a menu shows up: Ubuntu. Ubuntu. Windows 8.1. If I choose Windows, it boots into Windows without any problem. If I choose Ubuntu, it boots into Grub (back to step 14). Here's my BootInfo Summary: http://paste.ubuntu.com/6698171/ Windows Boot Manager is clearly not working as expected; I can't directly boot into it and I can't boot into it from BIOS either (efidisk read error again). If I want to boot into Windows I need to boot into Grub first, which is the opposite of what I wanted. I need help at this point. What is the best thing I can do? Is there a more reliable and/or simpler way of acomplishing a satisfying dual-boot for this situation? Can someone provide a way for going back to step 8, where I had a more efficient dual-boot setup? If only I could undo what I did with Easy BCD and skip Windows' Boot Menu... Can someone provide a way to fix this mess? Thanks in advance and sorry for the length of this, I wanted to be exhaustive.

    Read the article

  • Cloning A Database On The Same Server Using Rman Duplicate From Active Database

    - by alejandro.vargas
    To clone a database using Rman we used to require an existing Rman backup, on 11g we can clone databases using the "from active" database option. In this case we do not require an existing backup, the active datafiles will be used as the source for the clone. In order to clone with the source database open it must be on archivelog mode. Otherwise we can make the clone mounting the source database, as shown in this example. These are the steps required to complete the clone: Configure The Network Create A Password File For The New Database Create An Init.Ora For The New Database Create The Admin Directory For The New Database Shutdown And Startup Mount The Source Database Startup Nomount The New Database Connect To The Target (Source) And Auxiliary (New Clone) Databases Using Rman Execute The Duplicate Command Remove The Old Pfile Check The New Database A step by step example is provided on this file: rman-duplicate-from-active-database.pdf

    Read the article

  • Unable to see External HDD in Windows Explorer

    - by Jamie Keeling
    I have bought a 320GB External HDD which I want to use with my Playstation3. I know it will only work with a Fat32 file system so using some free HP software it formatted it, unbeknown to me it will only work up to 32GB. After seeing this I panicked, downloaded Partition Wizard Home Edition and deleted the partition. As I was about to create a new partition to put it back to NTFS (I'd just wanted to be able to use it in the first place at this point) I accidently knocked the cable out of my computer for the HDD and after replacing it the External HDD is no longer recognised by the My Computer option, Disk Management asks me to initialise the disc using MBR but it fails saying "Copy protected". Even the partitioning software I previously mentioned can't do anything about it, all it says is "Bad Condition" and I can't perform any operations on it. Would anybody be able to guide me in getting this sorted? I'm terrified i've wasted a perfectly good 320GB HDD.

    Read the article

  • missing bootmanager after win7 installation from external hdd

    - by Alex
    today i tried to install win7 from an external hdd to my system. i tried this tut http://www.pcworld.com/article/165159/install_windows_7_from_an_external_hard_drive.html and everything went fine till i pluged off the external hdd. after i pluged it off and tried to restart the system i get a missing boot manager error. if i plug the external hdd in again it's all working fine again. i've searched for the last 2h and didn't find a good answer. did any of you have one ? regards Alex ps: i already tried any forms of reperation and the system is installed on the correct hdd.

    Read the article

  • Error in using DBAN on HDD

    - by John Watson
    I am using DBAN to erase HDD. DBAN is loaded from a CD and BIOS Boot order has been set to favour CD drive. On starting laptop, system boots from CD and DBAN interface can be seen. DBAN detects two storage devices, HDD and the SD Card. My HDD IS 320GB but DBAN says 298GB. It erases the SD card but when i try to erase HDD, it gives following error. DBAN finished with non-fatal errors. *ERROR /dev/sdb (process crash) *ERROR /dev/sda (process crash)

    Read the article

  • HDD vanished after wakeup from standby

    - by Sam
    In my computer I got two hard drives: One 80GB Intel X25 Postville SSD for the system and a 1,5TB Sata HDD for data. When I put the system into standby, and wake it up again, roundabout 50% of the time the 1,5TB HDD is not found. It just vanished from the system (wreaking havok to all programs running which had open files on it). Even going into the system management and refreshing the drives does not find the lost HDD. There are no messages about this in the event log. After a warm reboot the hdd is found again, just like it should. The system is a Shuttle SP35P2 Pro with 8GB Ram and DualCore CPU, OS is Windows 7 Ultimate. I even set up the OS anew, didn't help. Any ideas what might cause this? How to debug, or maybe even fix it?

    Read the article

  • Disaster After Removing Two HDD From LaCie RAID 0 Case

    - by John
    This is the second time this has happened. I own a LaCie IDE RAID 0 Enclosure and the RAID went bad. The system gave me a warning that the data could be read from the RAID but that nothing could be written, and to remove the data ASAP. I did that and erased and reinitialized the RAID. System reported it was fine, no issues. I wrote to the RAID again and the system reported the same issue. So, I removed the drives and tested them individually thinking one must have gone bad. Sure enough, one HDD reported all bad blocks, every single one after the Master Boot Record. I didn't think much about it because of the age of the drives, 5 years old. So, I bought two new drives plugged them in and started up the RAID again. Exactly the same thing happened. All was fine after initializing the RAID and then the next day after powering on the RAID the exact same issue. The HDD sitting in the same position as the first "bad" HDD reported all bad blocks. Obviously, this is an issue with LaCie's bridge board not with the drives. No utility I have used has been able to bring this HDD back to life. I thought I would just copy the MBR from the good drive to the new one using a sector editor but am hesitant. Is it possible the firmware on the HDD has been corrupted by the LaCie bridge board?? What else could be the cause of such an issue? How can I fix this drive?

    Read the article

  • How to tell LAMP server to look at 2nd HDD for files when php is still pointing to a location on 1st HDD?

    - by Jizbo Jonez
    I have a phpBB install that currently has its attachments stored on my main HDD, but I am running out of room there fast. So I want to get a 2nd HDD installed on the server and put all of the phpBB files on that instead. So my question is how can I tell phpBB to look at my 2nd HDD for the files when it is still pointing to a location on 1st HDD? I've read a bit about softlinks and mod_alias but am still confused about how they work exactly. Does anyone know a good way to do this?

    Read the article

  • Cloning (mirroring) laptop display to area of external monitor display

    - by intuited
    I'm using Maverick "10.10" Meercat on a HP Pavilion tx2110. This machine has an NVidia Go6150 graphics card, and sports a 1280x800 display. I have an external monitor which can do 1280x1024 resolution. FWIW I'm using openbox as my window manager; as I understand it this shouldn't be a factor. I'd like to clone the display to the monitor, so that the size of the desktop remains at 1280x800, and there is a horizontal blank area on the external monitor. I.E. I want to avoid having to pan the display of the desktop on either monitor. So the actual resolution of the monitor would be 1280x1024, but the resolution of the section of the monitor where stuff was actually being displayed would be 1280x800. Using the nvidia-settings applet, I'm able to set up the cloned display so that the desktop size is 1280x1024 (the resolution of the external monitor), but can't find a way to instead have the desktop size stay at the resolution of the laptop's built-in display. Is this achievable? Ideally I'd like the external monitor's blank area to be at the top of the screen, i.e. for it to align the display with the bottom of the screen.

    Read the article

  • Unable to make my bios see my sata hdd

    - by Stefan
    I know there are many question about that, but I tried everything and I'm still not able to make my bios see my sata2 hdd. I've got a QDI motherbord with no sata port; only 2 ide ports. I had an old ide hdd, now i've removed it and bought a sata2 hdd. Since my pc has no sata slots i bouth a ide-to-sata adapter. So, i don't have any os installed on the new drive, and the old drive is removed. My problem is that I'm unable to see my hdd on bios. I suppose that my bios, since it's an old version, doesn't have sata drivers, but I don't know if I must install it and also I dont know how to do it. Anyone can help me?

    Read the article

  • Error in mounting HDD

    - by Vikramjeet
    I am getting the following error whenever I mount my external HDD. It was working before and then I opted for safely removing the drive. Now its giving me following error Error mounting: mount exited with exit code 13: ntfs_mst_post_read_fixup_warn: magic: 0x43425355 size: 4096 usa_ofs: 8850 usa_count: 65535: Invalid argument Actual VCN (0x800006009000000) of index buffer is different from expected VCN (0x0). Failed to mount '/dev/sdb1': Input/output error NTFS is either inconsistent, or there is a hardware fault, or it's a SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows then reboot into Windows twice. The usage of the /f parameter is very important! If the device is a SoftRAID/FakeRAID then first activate it and mount a different device under the /dev/mapper/ directory, (e.g. /dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation for more details.

    Read the article

  • Cloning existing software for commercial purposes - legal implications

    - by user2036256
    I have been asked to clone some existing software for a company. Basically its an old 16 bit DOS console app, which was supplied free of charge in I believe the late 80's. Having replaced the machine that needs to run it with a box running Win7 x64 they can't get it to work. It crashes every couple of minutes under DOSbox. The company that supplied it appears to no longer exist - if they did the company asking me to do this would almost certainly know about it. Its undetermined whether they have gone entirely or are just trading under a different name. If the latter they seem to have withdrawn from the market related to this product (because again, niche area, we should know about everyone there). What is the status to this with regards to copyright etc.? The main concern for the company involved is they want an identical interface to what they already have so I would have to clone this entirely. Having no source code / indication of the underlying mechanisms these would be written from scratch. Is an interface covered by copyright? / Does that still hold 30 years later? What is the assumed license when none at all is provided? Under UK law would I be under any serious risk were I to take on the project? How would this pan out if I then decided to sell the software on to other companies? Thanks

    Read the article

  • programm and user data from an old hdd to a new installation on ssd

    - by hans wurst
    i tried everything since days, now i ask. i got a ubuntu system on my old hdd, wich is connectet via usb to this system and a sdd is build in my notebook. at the moment i am running a ubuntusystem from an usb stick. it have tried to clone my disk(cahnge uiid, etc), to transport the data via deja dup and much more. the result was nothing or strange things. my idea is to copy the important data form the old system to the new(home and whatever), but it is not allowed to do this. somebody her who know a tool wich can do this, or got an an other idea.

    Read the article

  • LG LW20 Express won't boot after hdd replace

    - by Mika
    My old laptop (LG LW20 Express) got a hdd failure and I replaced the hdd. Now the laptop won't boot from cd or usb. I'm trying to install ubuntu on it. When I turn the laptop on it shows me the startup screen but when it should be the time to load operating system it just gives a black screen and starts over. This loop continues until I shut down the laptop. I created the usb boot drive following this guide https://help.ubuntu.com/community/Installation/FromUSBStick/ I used my boot cd to install ubuntu on this machine I'm using right now. So at least the cd should work. From the BIOS I can see that my newly installed hdd is recognized and put as a secondary master. Also the cd and removable media are in the boot list before hdd. The laptop runs pretty hot. The fan is at full speed pretty soon after the laptop is turned on. Earlier I suspected that it would have been the almost broken hdd that would have produced that heat but there obviously is something else also. Any ideas what to check?

    Read the article

  • Need help. HDD Failed

    - by jiewmeng
    i have a seagate 3.5" 500GB SATA2 HDD that i put in a USB case (vantec) that failed recently. symptoms: at first, it started except that attempts made to browse certain folders resulted in "Data Error (Cyclic Redundancy Check)". then when i tried restarting the hdd, then i got a RAW partition, and windows 7 said i need to format it. i also tried using a desktop to connect to the HDD directly using SATA, windows 7 stuck at "starting windows" for abt half hour b4 i gave up on it. in the BIOS, it seems to detect the HDD model correctly, something like STA3500xxx something like that i also tried using TestDisk as suggested by jaclaz on MSFN and it did not find any partitions what could i do now?

    Read the article

< Previous Page | 2 3 4 5 6 7 8 9 10 11 12 13  | Next Page >