Search Results

Search found 2436 results on 98 pages for 'hdd cloning'.

Page 5/98 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• Data recovery on a Samsung SV1203N HDD

  - by Jim Conace

  Let me start by saying that I am a beginner in Ubuntu, but pretty knowledgeable with Windows. I am having a strange problem trying to recover data from a Samsung SV1203N HDD (120 GiB). I have tried numerous things in both Windows 7 and Ubuntu 12.04 LTS (on a flash drive, an external HDD and a Live CD). This drive has some very important data on it and I am praying some of you Ubuntu geeks can help me get it back. Here's my problem. The HDD is clicking while I am booting, but it stops when I get into Ubuntu or Windows. It refuses to be detected in the bios, so I cant perform any tests on it. I have tried numerous things in both Windows (repair CD, Jumpers, etc.) and Ubuntu (Boot-Fix, GParted, Testdisk, Photorec, forcing a mount, etc.). But it all seems to lead me back to the fact that the drive is not being recognized in the BIOS. I've even tried chilling the drive in the fridge, which worked well for another drive I work on, and I recovered all of the data in Ubuntu flawlessly. I am assuming that since the drive stops clicking when I get into the OS' that there is hope for recovery. I am going to try an IDE/SATA to USB cable, and replacing the Logic Board, but I want to exhaust all other possibilities before I do that. Any help would be greatly appreciated Bye

  Read the article

• SSD cache to minimize HDD spin-up time?

  - by sirprize

  short version first: I'm looking for Linux compatible software which is able to transparently cache HDD writes using an SSD. However, I only want to spin up the HDD once or twice a day (to write the cached data to the HDD). The rest of the time, the HDD should not be spinning due to noise concerns. Now the longer version: I have built a completely silent computer running Xubuntu. It has a A10-6700T APU, huge fanless cooler, fanless PSU, SSD. The problem is: it also has (and needs) a noisy HDD and I want to forbid spinning it up during the night. All writes should be cached on the SSD, reads are not needed in the night. Throughout every day, this computer will automatically download about 5 GB of data which will be retained for about a year, giving a total needed disk capacity of slightly less than 2 TB. This data is currently stored on a 3 TB noisy hard disk drive which is spinning day and night. Sometimes, I'll need to access some data from several months ago. However, most times I'll only need data from the last 14 days, which would fit on the SSD. Ideally, I'd like a transparent solution (all data on one filesystem) which caches all writes to the SSD, writing to the HDD only once a day. Reads would be served by the cache if they were still on the SDD, else the HDD would have to spin up. I have tried bcache without much success (using cache_mode=writeback, writeback_running=0, writeback_delay=86400, sequential_cutoff=0, congested_write_threshold_us=0 - anything missing?) and I read about ZFS ZIL/L2ARC but I'm not sure I can achieve my goal with ZFS. Any pointers? If all else fails, I will simply use some scripts to automatically copy files over to the big drive while deleting the oldest files from the SSD.

  Read the article

• IDE laptop HDD only recognised in BIOS, what to do?

  - by Tom Schuermans

  My old IDE HDD from my laptop recently crashed and now, I can only see it in the BIOS. When I try to track it down using GParted or other tools, I can't seem to find it. Does anyone have a solution to my problem?

  Read the article

• Install Visual Studio 2010 on SSD drive, or HDD for better performance?

  - by Steve

  I'm going to be installing Visual Studio 2010. I already have my source code on the SSD. For best performance, especially time to open the solution and compiling time, would it be better to install VS 2010 on the SSD or install it on the HDD. If both were on the SSD, loading the VS 2010 files would be quicker, but there would be contention between loading the source and the program files. Thanks!

  Read the article

• Install Visual Studio 2010 on SSD drive, or HDD for better performance?

  - by Steve

  I'm going to be installing Visual Studio 2010. I already have my source code on the SSD. For best performance, especially time to open the solution and compiling time, would it be better to install VS 2010 on the SSD or install it on the HDD. If both were on the SSD, loading the VS 2010 files would be quicker, but there would be contention between loading the source and the program files. Thanks!

  Read the article

• Using an Internal HDD as an External HDD also or an External HDD for installing SAP ?

  - by Asterix

  Is it possible and advisable to use an Internal Hard Drive as an External Hard drive also. I wanted to install SAP ECC 6 on my system which has only 250 GB but atleast 300 GB is required.I wanted to buy an External Drive first, then I heard loading SAP on an External would make it extremely slow. I'll be using it only as a beginer so even if it is a little slow i don't mind. Is it feasible to run such a big application from an External Hard disk ? So can i purchase a 500 or 1 TB Internal Hard disk and use it as an External too by fitting it with the necessary USB 3.0 Hard drive cases and cables ? or should i purchase a External and load SAP onto it ? Thank you.

  Read the article

• Cloning a WebCenter Portal Managed Server

  - by Maiko Rocha

  I had to run some tests on a WebCenter Portal application deployed in a cluster. I've got a development VM with WebCenter PS4 (this also works on PS5) and I was trying to figure out how could I easily add a new managed server to my single-node domain, and make it a cluster. Creating the machine and cluster are a piece of cake, you can do it pretty quick through WLS Console. Now, you'd guess that using the clone option on WLS Console would do the magic of cloning an existing instance, right? Well, it does, but all you get is an "empty" managed server: with no target libraries.  It was a good surprise to find that WebCenter provides a way of cloning an existing WebCenter Portal managed server through a simple WLST command: cloneWebCenterManagedServer  This is a screenshot of my starting point. I want to clone WC_CustomPortal managed server: These are the steps to clone my WC_CustomPortal managed server: 1. In the command line, invoke WLST. It should be on <ORACLE_HOME_for_component>/common/bin/wlst.sh. In my case, it is ./product/Middleware/WebCenterPortal/common/bin/wlst.sh 2. Connect to the Admin Server:  connect ('<wls_admin_username>','<password>','t3://<server>:<port>') 3. Execute the following command: wls:/webcenter/serverConfig> cloneWebCenterManagedServer(baseManagedServer='WC_CustomPortal', newManagedServer='WC_CustomPortal2', newManagedServerPort=8893, verbose=1) I've turned on verbose output on purpose so I could see what the script was doing while executing. This is the output:  [...] Creating the Managed Server "WC_CustomPortal2" MBean type Server with name WC_CustomPortal2 has been created successfully. Targeting the library "oracle.bi.adf.model.slib#[email protected]" to the Managed Server "WC_CustomPortal2" Targeting the library "oracle.bi.adf.view.slib#[email protected]" to the Managed Server "WC_CustomPortal2" Targeting the library "oracle.bi.adf.webcenter.slib#[email protected]" to the Managed Server "WC_CustomPortal2" Targeting the library "oracle.wsm.seedpolicies#[email protected]" to the Managed Server "WC_CustomPortal2" Targeting the library "oracle.jsp.next#[email protected]" to the Managed Server "WC_CustomPortal2" Targeting the library "oracle.dconfig-infra#[email protected]" to the Managed Server "WC_CustomPortal2" Targeting the library "orai18n-adf#[email protected]" to the Managed Server "WC_CustomPortal2" Targeting the library "oracle.adf.dconfigbeans#[email protected]" to the Managed Server "WC_CustomPortal2" Targeting the library "oracle.pwdgen#[email protected]" to the Managed Server "WC_CustomPortal2" Targeting the library "oracle.jrf.system.filter" to the Managed Server "WC_CustomPortal2" Targeting the library "adf.oracle.domain#[email protected]" to the Managed Server "WC_CustomPortal2" Targeting the library "adf.oracle.businesseditor#[email protected]" to the Managed Server "WC_CustomPortal2" Targeting the library "oracle.adf.management#[email protected]" to the Managed Server "WC_CustomPortal2" Targeting the library "adf.oracle.domain.webapp#[email protected]" to the Managed Server "WC_CustomPortal2" Targeting the library "jsf#[email protected]" to the Managed Server "WC_CustomPortal2" Targeting the library "jstl#[email protected]" to the Managed Server "WC_CustomPortal2" Targeting the library "UIX#[email protected]" to the Managed Server "WC_CustomPortal2" Targeting the library "ohw-rcf#[email protected]" to the Managed Server "WC_CustomPortal2" Targeting the library "ohw-uix#[email protected]" to the Managed Server "WC_CustomPortal2" Targeting the library "oracle.adf.desktopintegration.model#[email protected]" to the Managed Server "WC_CustomPortal2" Targeting the library "oracle.adf.desktopintegration#[email protected]" to the Managed Server "WC_CustomPortal2" Targeting the library "oracle.bi.jbips#[email protected]" to the Managed Server "WC_CustomPortal2" Targeting the library "oracle.bi.composer#[email protected]" to the Managed Server "WC_CustomPortal2" Targeting the library "oracle.webcenter.skin#[email protected]" to the Managed Server "WC_CustomPortal2" Targeting the library "oracle.webcenter.composer#[email protected]" to the Managed Server "WC_CustomPortal2" Targeting the library "oracle.webcenter.framework.core#[email protected]" to the Managed Server "WC_CustomPortal2" Targeting the library "oracle.sdp.client#[email protected]" to the Managed Server "WC_CustomPortal2" Targeting the library "oracle.soa.workflow.wc#[email protected]" to the Managed Server "WC_CustomPortal2" Targeting the library "oracle.soa.worklist.webapp#[email protected]" to the Managed Server "WC_CustomPortal2" Targeting the library "oracle.ucm.ridc.app-lib#[email protected]" to the Managed Server "WC_CustomPortal2" Targeting the library "p13n-app-lib-base#[email protected]" to the Managed Server "WC_CustomPortal2" Targeting the library "p13n-core-web-lib#[email protected]" to the Managed Server "WC_CustomPortal2" Targeting the library "jaxrs-framework-web-lib#[email protected]" to the Managed Server "WC_CustomPortal2" Targeting the library "jersey-web-lib#[email protected]" to the Managed Server "WC_CustomPortal2" Targeting the library "wcps-util-app-lib#[email protected]" to the Managed Server "WC_CustomPortal2" Targeting the library "wcps-services-client-web-lib#[email protected]" to the Managed Server "WC_CustomPortal2" Targeting the library "content-app-lib#[email protected]" to the Managed Server "WC_CustomPortal2" Targeting the library "content-web-lib#[email protected]" to the Managed Server "WC_CustomPortal2" Targeting the library "oracle.webcenter.framework#[email protected]" to the Managed Server "WC_CustomPortal2" Targeting the library "oracle.webcenter.framework.view#[email protected]" to the Managed Server "WC_CustomPortal2" Targeting the library "oracle.webcenter.forum.dependency#[email protected]" to the Managed Server "WC_CustomPortal2" Targeting the library "oracle.webcenter.jive.dependency#[email protected]" to the Managed Server "WC_CustomPortal2" Targeting the library "oracle.webcenter.spaces.fwk#[email protected]" to the Managed Server "WC_CustomPortal2" Targeting the library "oracle.webcenter.activitygraph.lib#[email protected]" to the Managed Server "WC_CustomPortal2" Targeting the datasource "mds-CustomPortalDS" to the Managed Server "WC_CustomPortal2" Targeting the datasource "WebCenter-CustomPortalDS" to the Managed Server "WC_CustomPortal2" Targeting the datasource "Activities-CustomPortalDS" to the Managed Server "WC_CustomPortal2" Targeting the application "wsil-wls" to the Managed Server "WC_CustomPortal2" Targeting the application "DMS Application#11.1.1.1.0" to the Managed Server "WC_CustomPortal2" Targeting the application "ViewHandlerOverride_webapp1#V2.0" to the Managed Server "WC_CustomPortal2" Targeting the application "ViewHandlerOverride_application1#V2.0" to the Managed Server "WC_CustomPortal2" Targeting the startup class "JRF Startup Class" to the Managed Server "WC_CustomPortal2" Targeting the startup class "JPS Startup Class" to the Managed Server "WC_CustomPortal2" Targeting the startup class "ODL-Startup" to the Managed Server "WC_CustomPortal2" Targeting the startup class "Audit Loader Startup Class" to the Managed Server "WC_CustomPortal2" Targeting the startup class "AWT Application Context Startup Class" to the Managed Server "WC_CustomPortal2" Targeting the startup class "JMX Framework Startup Class" to the Managed Server "WC_CustomPortal2" Targeting the startup class "Web Services Startup Class" to the Managed Server "WC_CustomPortal2" Targeting the startup class "JOC-Startup" to the Managed Server "WC_CustomPortal2" Targeting the startup class "DMS-Startup" to the Managed Server "WC_CustomPortal2" Targeting the shutdown class "JOC-Shutdown" to the Managed Server "WC_CustomPortal2" Targeting the shutdown class "DMSShutdown" to the Managed Server "WC_CustomPortal2" Validating changes ... Validated the changes successfully [...] And this is the newly created WC_CustomPortal2 managed server showing up on Weblogic console:  Here is the full reference to WebCenter Portal Custom WLST Commands. Special thanks to Todd Vender for pointing this one out! :-)

  Read the article

• HDD Producing high pithched beep noise

  - by POTHEN

  Recently I had an upgrade on one of my PC I added a 512Mb Nvidia Graphic card and 500GB seagate 7200Rpm HDD, Now the new HDD is producing a high pitched squeek/beep i cant really tell and on reboot my XP sector 63 gets corrupted, so I get reboot error. I gave the HDD for replacement but the replaced one too makes the noice, yet the HDD does not produce sound on my gaming rig.

  Read the article

• Use HDD enclosure as portable hard drive?

  - by jeffmangum

  Someone here suggested that i should use an external hdd enclosure since my pc doesnt support a 2nd hdd and i want to use my old hdd. I will be permanently plugging that hdd enclosure to my pc and someone said it isnt safe. I'm really concerned since i would be using that drive and i'll probably be always using it since i'd play the music files i have in there. Also, would it be ok if i use that enclosure as a portable external drive?

  Read the article

• Tool to test HDD for health?

  - by Ognjen

  I've had my HDD replaced, and now my computer is freezing every 1 to 5 minutes for 5 to 10 seconds. Actually, only active applications freeze (but it can be ANY application), usually when I click something, but sometimes by themselves. How can I check if this is HDD issue or software issue? I don't want to send my laptop for second HDD replacement right away, since the last service took 40 days, so I am looking for a tool that could confirm that this is a HDD issue.

  Read the article

• Using portable Mode for true crypt for crypting Portable HDD , USB etc

  - by Gaurav_Java

  I was wondering how to encrypt my external HDD so that my data would be safe AND accessible from any OS platform (Windows and Linux). So I went through many posts and forums and found out the best thing was to use true crypt. I went along with this post and encrypt my USB drive. When inserted that, Windows didn't recognize it. Then I followed another post that said to install truecrypt. The thing is : How can i use traveler disk setup in Ubuntu (Option not found)? Install truecrypt in USB so that i can *mount my USB or HDD on any other OS? If there is no solution for the upper two, then is there any other software which I can use to encrypt an USB device so that it can be accessed from any OS?

  Read the article

• Using an old PC case and power supply as a HDD Enclosure?

  - by mexiq

  I have 5 HDD and my computer is not handling the situation very well. hehe There are some towers that I can buy to put 4 of my drives out, but I'm thinking that I could use the power source of a failed computer I have and use it to power the 4 (or at least 3) of the drives. The data cables (SATA) will remain connected to the working computer (so no USB solution). The problem is that the power source will not work unless it is connected to the failing computer motherboard. Is there any way I could use the power source without plunging it to the old motherboard? Any "HOW-TO" links may be useful as well.

  Read the article

• I cant acess my HDD

  - by user286283

  First of all, I'm a total Linux noob. I was running the latest version of Ubuntu but eventually I wasn't able to boot no more, the Ubuntu logo appeared and then it was only a blinking white bar indefinitely, without charging. Now, my problem is the following. I want to do a fresh install and I am trying to recover my latest files from the HDD using the Ubuntu live CD. I click on the HDD and obtain the following I honestly don't really know whats going on. Looking at disks I have this... Can anyone help me out? Cheers.

  Read the article

• busybox initramfs prompt while attempting to install from live cd on 2nd hdd

  - by da92n

  busybox initramfs prompt while attempting to install from live cd on 2nd hdd I've created a partition in ext3 on my second hdd to intall linux however when i come to boot the CD i get directed to a busybox prompt with no other choice than help. Other topics i've read on the subject where bound to the idea ubuntu has been already installed, and that the partition needs to be just indicated or else... But since i've no ubuntu installed, neither have i any partition that ubuntu should consider like that... How can i go through that?

  Read the article

• Unstable after moving headless server from usb-hdd to usb pendrive

  - by nlee

  Ubuntu server 12.04.1 running from usb-hdd is rock solid for months. After copying the partitions to a Kingston usb pendrive the system will only run for 3-4 days before some services fail. Is running 12.04.1 from usb pendrive a viable approach? How do I troubleshoot the problem? In the meanwhile, I have reverted back to usb-hdd. Willing to buy a usb pendrive that is known to work. Recommendations?

  Read the article

• Seagate présente un disque dur hybride SSD-HDD, qui diminue le temps de boot par deux

  Seagate présente un disque dur hybride SSD-HDD, qui diminue le temps de boot par deux Après avoir annoncé la sortie d'un disque de 3 To dans l'année, Seagate présente sa nouvelle série de disques durs Momentus XT, de format 2.5". La particularité de cette gamme ? Une hybridation SSD-HDD. Un partie de chaque disque sera en efffet en SDD pour une bonne réactivité, et l'autre sera standard pour offrir une grande capacité de stockage. Le Momentus XT contient ainsi 4 Go de puces SLC permettant d'accélérer l'accès aux fichiers les plus...

  Read the article

• LVM and cloning HDs

  - by jcea

  Using Linux, I have several backup levels. One of them is a periodical sector by sector copy (using dd) of my laptop harddisk to an external USB disk. Yes, I have other backups too, like remote rsync. This approach (the disk dd) is OK when cloning a HDD with no LVM volumes, since I can plug the external disk anytime and mount the partitions simply mounting /dev/sdb* instead of /dev/sda*. Trivial and handy. Today I moved ALL my harddisk (including the /boot) to LVM. Everything works fine. I will stress it for a couple of days, and then I will do a sector by sector copy to my external harddisk. Now I have a problem, I guess. If in the future I plug the external USB HDD to recover any file, the OS will detect a duplicate LVM configuration, with the same name and the same UUID. Even doing a vgrename (which LVM would be renamed, the internal HDD or the external HDD?), the cloned UUID will not change. Is there any command to change name and UUID? Ideally I would clone the HDD and then change the LVM group name and its UUID, but I don't know how to do it. Another related issue would be... In the past I have booted my laptop using the external disk, using the BIOS boot menu and changing GRUB entries manually to boot from /dev/sdb instead of /dev/sda. But now my current GRUB configuration boots directly from a LVM logical volume, something like: set root='(LVM-root)' in my grub.cfg. So... What is going to happen with duplicated volumes? Any suggestion? I guess I could repartition my external harddisk and change backup strategy from dd to rsync, but this disk has windows installed too, and I really would like to have a physical "real" copy.

  Read the article

• IBM x226 server with Windows 2003 freezing and showing one HDD degraded

  - by Zvonko Telefonko

  We have an IBM x226 server with Windows 2003 running on it. For weeks it's been very slow and it freezes at least once each day. At the boot it show message "degraded" for one HDD and optimal for other HDDs. We have 4 HDDs in it set up in Raid 1. HDD 1 - HDD 2, HDD 3 - HDD4. It seems that HDD2 is the one who is causing problems (showing degraded status). There's an amber led blinking on it together with the green one. We installed ServerRAID manager downloaded from IBM and it gave us option for "rebuild". But the server froze at some point and now it's rebuilding from start again. I've done some Googling and it says that it could be to failing HDD or some cache battery. How can we verify what is the cause of this?

  Read the article

• Failing Seagate HDD - Not Recognised

  - by thefragileomen

  I am having a look at a friend's computer which contains a 500GB Seagate HDD. Unfortunately the HDD is not recognised by the BIOS menu and it beeps 11 times upon powerup. I've moved the HDD to another laptop but the problem remains. I've downloaded SeaTools for DOS (Seagate's Diagnostic tool) but unfortunately to no avail and the disc remains unseen when using this DOS boot disc. The HDD is only 6 months old so I'm very surprised at this but it appears a common problem with Seagate 2.5" HDDs as well as other HDDs manufactured by Seagate. I intend to try it in an external caddy on Thursday when back in work and also through a forensic writeblocker but just wondering if anyone has any other suggestions? I am of the opinion it is some chip on the HDD board which prevents it spinning due to a fault. If so, I've lost to deactivate this just so I can simply recover the data on the drive and start with a new disc. Thanks

  Read the article

• NTFS partitions hidden under EXT4 file system / partion...want to recover files from NTFS

  - by user7534

  Hi all, I am new to ubuntu, but very impressed with the system. so one day i tried installing ubuntu 10.10 along with windows in dual boot first place it didnt get installed properly and during second attempt i could do it right but oh...i lost my windows 7 , here is my problem and what i have done till now. i have hdd installed with ubuntu same disk have windows partitions and i need to extract data from those ...very very important i tried to access the same from ubuntu ...can not access it, 3.reinstalled the windows 7 , hdd is not detected 4.during installation ubuntu gone , so reintalled scan in ubuntu says hdd is fine and DiskInternals linux reader actual show the NTFS partitions , recovery tool not able to get any data out. , please help i need data from these partitions...please I feel that i have put ext4 partition on ntfs filesystem...and now not able to access it

  Read the article

• Ubuntu version on external hardrive that shows up in GRUB?

  - by RPi Awesomeness

  I was wondering, is it possible to have Ubuntu installed on an external harddrive and still have it show up in GRUB? Of course, you wouldn't be able boot the other HDD OS unless it was connected, but would this work? I googled 'external HDD OS show in GRUB' and 'have external HDD show up in GRUB' but they didn't bring up anything. Does anyone have any resources to point me to? I can see this as being useful for testing out new releases or having multiple OSs installed without having to go through the BIOS boot choice. Thanks!

  Read the article

• Whats consuming HDD Space

  - by Umair Mustafa

  I have single partition of 92GB in which I installed Ubuntu 12.04. And for some Unknown reason a message pop ups saying that I only have 1GB of HDD space left. I ran command sudo du -hscx * on / and /home /home gave me this result 4.0K C:\nppdf32Log\debuglog.txt 0 convertedvideo.avi 176M Desktop 16K Documents 169M Downloads 4.0K examples.desktop 17M file.txt 4.0K Music 984K Pictures 4.0K Public 320K Red Hat 6.iso 2.5M syslog-ng_3.3.6.tar.gz 4.0K Templates 8.0K terminal.png 1.2M Thunderbird Attachments 698M ubuntu10.04LTS.iso 16K Ubuntu One 4.0K Untitled Folder 4.0K Videos 21G VirtualBox VMs 22G total And / gave me this result 81G home 0 initrd.img 0 initrd.img.old 833M lib 16K lost+found 68K media 4.0K mnt 260M opt du: cannot access `proc/8339/task/8339/fd/4': No such file or directory du: cannot access `proc/8339/task/8339/fdinfo/4': No such file or directory du: cannot access `proc/8339/fd/4': No such file or directory du: cannot access `proc/8339/fdinfo/4': No such file or directory 0 proc 640K root 908K run 8.6M sbin 4.0K selinux 4.0K srv 0 sys 148K tmp 3.3G usr 436M var 0 vmlinuz 0 vmlinuz.old 86G total If you look at the result returned by / it shows that /home is consuming 81GB but on the other hand /home returns only 22GB. I cant figure out whats consuming the HDD. I have not installed anything except Virtual Machines Perpetrator found using Disk Usage Analyzer

  Read the article

• Gparted funkiness - won't recognize 1TB, full-hdd /home partition, but recognizes ext4 and /home label

  - by Kurtosis

  I have a 1TB SATA hard disk from my old desktop, and the entire thing is an ext4 /home partition (/, /boot, and swap were all on another hdd). It is now in a USB2 enclosure and I want to use it to back up my current laptop /home. To do this I need to shrink the /home partition on the 1TB backup drive. It only uses about 500GB so that shouldn't be a problem, I'll start the laptop with an Ubuntu live USB, plug in the 1TB drive, and use Gparted to shrink the 1TB /home partition to ~500GB. Then I can create a second partition in the newly freed space, and cp -ax my laptop's /home over to it. Unfortuntely, Ubuntu Live USB can detect and mount the external hdd, and Gparted can see it's there, but Gparted can't read it and hence can't resize it. Disk Utility reports the drive is fine, no errors, so I'm not sure what's the problem. See linked pics, worth a thousand words. Anyone know what the problem is here? Any pointers in the right direction much appreciated.

  Read the article

• Dual-boot computer won't boot without external hard drive

  - by FrankP

  I have Ubuntu loaded on my external HDD. I tried to unplug the external drive so that this way I could run Windows as the default OS to boot when the computer turns on, but it gives me an error. I need to know how I can make it so that when my computers boots it stops saying Error: no such device: (a whole bunch of numbers and letters) then it says grub rescue>_. If I plug the external HDD in, and I let Ubuntu run the boot process, then it gives me a list of OS's/ HDD's to choose from and Windows 7 is there. The only problem is that I want Windows be my default OS, not the other way around. P.S. I have found that I dislike Ubuntu because I can't even figure out how to install the necessary programs to learn how to start writing Ruby On Rails. So installing it was a waste of my time, in my opinion. Now that I have it on the external hard drive, I will leave it installed though. I just dont want to have to keep that external drive plugged in to my computer all the time. Thank you a ton to whoever can help me! Thank you for the detail'd instructions. I am doing my best to follow you and it makes sense when I read it but, Rescatux is not doing what you said it would. None of the options you said would appear are not there. On my screen there is 4 options when MBR run's none look familiar and when I picked the best possible option based on my educated guesses it said success. I tried to restart my computer and it said Please insert windows recovery disc and hit enter. Problem being I don't have the windows recovery disc. I bought my computer from a local Computer tec and he loads windows on it for you. I have no time to run my compute over to him as sunday is my only day free. I think that I just wrecked my computer in the process of this attempted fix windows refuses to boot now WITH or WITHOUT the HDD. Please help this is getting out of hand

  Read the article

• Mount external hdd in fluxbox ubuntu -12.04 commandline install

  - by jeroen

  I did the following: Install command line interface with ubuntu alternate install 12.04 in vmwareplayer5(9.2.2) After the base system was installed: sudo apt-get update, upgrade and dist-upgrade, sudo apt-get install xinit xorg fluxbox build-essential lxterminal gksu leafpad pcmanfm mc chromium-browser, this works. I also installed vmwaretools. My problem is being unable to mount any usb hdd or thumb drives. I'm new at building fluxbox so any help would be much appreciated!

  Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >