Search Results

Search found 781 results on 32 pages for 'ken hung'.

Page 6/32 | < Previous Page | 2 3 4 5 6 7 8 9 10 11 12 13  | Next Page >

• WmiPrvSE.exe consuming 25% of CPU on Win7

  - by Ken Hortsch

  On my HP laptop the WMI Provider Host was consuming 25% of my CPU.  This just started one day.  The offending process ended up being the HP Wireless Assistant Service, which is not needed as Win7 provides WiFi services. To turn it off: On your desktop right-click on Computer and select Manage Select Services and Applications and double click Services Right click on the HP Wireless Assistant Service and select Properties Change the Startup Type to Manual

  Read the article

• Chrome OS is missing or damaged

  - by Ken

  My Google Chrome CR-48 started flaking out/rebooting and finally this message.  This post solved the problem quite easily. http://cr-48.wikispaces.com/Reseat+SSD+Cable Two hints: 1) you need to pull off the rubber feet to get at some screws. 2) the real problem is the little white clip under the cable.  Don’t worry about reseating anything, Just push the cable back on and the little white clip back up to snap in place and hold the cable.

  Read the article

• Can't use SFML sprite drawing and OpenGL rendering at the same time

  - by Ken

  I'm using some SFML built in functions to draw sprites and text as an overlay on top of some OpenGL rending in an SFML RenderWindow. The opengl rendering appears fine until I add the code to draw the sprites or text. The sprite or text drawing causes the OpenGL stuff to disappear. The follow code show what I'm trying to do sf::RenderWindow window(sf::VideoMode(viewport.width,viewport.height,32), "SFML Window"); glMatrixMode(GL_PROJECTION); glLoadIdentity(); glOrtho(0,viewport.width,0,viewport.height,0,1); while (window.pollEvent(Event)) { //event handling... //begin drawing glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT); glBegin(GL_TRIANGLES); glColor3f(col.x,col.y,col.z); for(int i=0;i<3;i++) glVertex2f(pos.x+verts[i].x,pos.y+verts[i].y); glEnd(); // adding this line causes all the previous opengl triangles not to appear window.draw("Sometext"); window.display(); }

  Read the article

• Pre baked fractures and explosion : I need an answer for C++

  - by Ken

  What are the prebaked or precomputed explosions or fractures from a programmer viewpoint ? I would like to know how to achieve this in C++ and how this things are usually considered (they are animations? textures?), it would be perfect if there will be some examples available or someone that can picture a broad view about this. I need to add a really small support for this in my code and i need an hint about how to start, i would like to do this on my own without other libraries.

  Read the article

• Creating a SQL Azure Database Should be Easier

  - by Ken Cox [MVP]

  Every time I try to create a database + tables + data for Windows Azure SQL I get errors.  One of them is 'Filegroup reference and partitioning scheme' is not supported in this version of SQL Server.' It’s partly due to my poor memory (since I’ve succeeded before) and partly due to the failure of tools that should be helping me. For example, when I want to create a script from an existing database on my local workstation, I use SQL Server Management Studio (currently v 11.0.2100.60).  I go to Tasks > Generate Scripts which brings up the nice Generate and Publish Scripts wizard. When I go into the Advanced button, under Script for Server Version, why don’t I see SQL Azure as an option by now? The tool should be sorting this out for me, right? Maybe this is available in SQL Server Data Tools? I haven’t got into that yet. Just merge the functionality with SSMS, please. Anyway, I pick an older version of SQL for the target and still need to tweak it for Azure. For example, I take out all the “[dbo].” stuff. Why is it put there by the wizard? I also have to get rid of "ON [PRIMARY]"  to deal with the error I noted at the top. Yes, there’s information on what a table needs to look like in SQL Azure but the tools should know this so I don’t have to mess with it.

  Read the article

• Good resources for learning about graphics hardware

  - by Ken

  I'm looking for some good learning resources for graphics hardware (and associated low level software). Basically I want to learn more about what goes on underneath the opengl/direcx API layers in terms of how things are implemented. I familiar with what happens in principle during the various stages of the rendering pipeline (viewing, projection, clipping, rasterization etc). My goal is to be able to make better and more informed decisions about tradeoffs and potential optimisations when graphics/shader programming with respect to the following kinds of issues; batching view culling occlusions draw order avoiding state changes triangles vs pointsprites texture sampling etc Basically whatever the graphics programmer needs to know about modern graphics hardware in order to become more effective. I'm not really looking for specific optimisation techniques, rather I need more general knowledge so that I will naturally write more efficient code.

  Read the article

• Google Maps keeps displaying in Spanish

  - by Ken Hortsch

  Originally posted on: http://geekswithblogs.net/BlueProbe/archive/2013/11/12/154610.aspxIn Chrome I use Google Maps as a search provider.  That way I can just type maps for the URL address, hit a couple of tab keys, and enter the maps address and have the page rendered with my map.  Now periodically maps were displaying in Spanish with a "click here to translate to English” option.  Huh?  My language settings on the browser and within Google settings all were English.  Turns out I had set my Chrome search provider string to include a language query parm=es.  Why would I do that?  Evil twin perhaps.

  Read the article

• AppleTV - itunes store is temporarily unavailable - please check back later

  - by Ken

  When attempting to rent a movie on ATV, my wife received the error message above.  Alternately “server unavailable”.  When your wife is sick, the amount of IT support she needs goes up exponentially.  One piece of the puzzle was that she had changed her Apple ID password.  On her PC I ran iTunes and under account, there was only 1 device listed (not the ATV).  Even when signed out/back-in on the ATV under Settings>iTunes it still gave same error message.  What I suspect is it thinks she is trying to authorize the device to another Apple ID.  Some new 90 day rule limits when a device can be associated with another Apple ID.  Your iTunes store/account will show devices, and how long before they can be associated with a different Apple ID from the Account Information page in iTunes on your computer.  Apple must have no freaking idea why someone would want to know which ID is associated to the ATV (i.e. the vice versa), because it can’t be done. Solution: Try ATV settings>reset I swapped out ATV 1 for ATV 2 (used for music streaming downstairs).  I know it’s a cop-out solution, but remember I had a sick wife breathing down my neck.

  Read the article

• -webkit-linear-gradient Not working in Dreamweaver CS6

  - by Ken

  I've tried multiple times to apply the following piece of code in a CSS document: display: block; width: 500px; margin: 500px auto; padding: 15px; text-align: center; border: 4px solid blue; background: -webkit-linear-gradient(top,black,white); outline: 7px solid red; Everything appears correctly, except the gradient. I have CS6 Live View turned on, and it still refuses to appear. All I get in my box is a white background, as opposed to the black to white gradient. However, when I type the same line of code into the trial of Coda 2 I downloaded, it works perfectly. Is there anything I can do to resolve the issue?

  Read the article

• How do I un-zoom compiz?

  - by Ken

  I'm using a keyboard I'm not used to, and I hit Super_L instead of Alt_L when I middle-mouse-dragged across the screen. On this Ubuntu 10.04 with Compiz, apparently, this zooms the screen to the area that I dragged across. Now I'm stuck. I can super-middle-drag across a bigger area, but apparently I can't quite hit all of the corners exactly because the screen still moves a bit when I move the mouse around. How do I undo this zoom effect completely? This looks like "EZoom", which says that super-"1" (default keybinding, anyway) should reset it, but that doesn't seem to work here. Close...

  Read the article

• Google Chromecast cast tab from Chrome browser sucks

  - by Ken Hortsch

  Originally posted on: http://geekswithblogs.net/BlueProbe/archive/2013/07/28/153537.aspxOk so I know it’s in beta.  And I should have known when I watched the Nexus 7 and Chromecast press event and the demo showed the browser casting a slide show.  But, when I bought one of these little $35 beauties and tried casting a soccer game from ESPN it was pathetic with a 2 FPS rate.  Netflix and YouTube are awesome.  We’ll see what we get out of beta.

  Read the article

• Calling a web service through a reverse proxy

  - by Ken

  I had a w/s that when I first read the WSDL in test, was http, but needed to be accessed from behind a reverse proxy with https.  Here are the steps: Change the app.config, <httpTransport> to <httpsTransport> Change the app.config and the url address in the <endpoint>to the reverse proxy address Add System.Net.ServicePointManager.ServerCertificateValidationCallback = delegate { return true; };  to disable certificate validation.  This will validate all certificates (including invalid, expired or self-signed ones).

  Read the article

• Re-Route Mail to a port other than 25

  - by Ken

  Is there a way to route mail to another port? I have an email account attached to my laptop that I'd like to be able to send and receive mail from. Due to mobility, I'll be passing through various networks that will probably block this port. My dynamic DNS provider allows me to utilize web-forwards for MX domains; is this possible? where I can web forward to a domain:port which is managed by my DNS provider when I traverse between networks. If not, is there a way? Of course i could use web-mail or relay-forwarding from my home server, but that's not geeky enough.

  Read the article

• What is the future of XNA in Windows 8 or how will manged games be developed in Windows 8?

  - by Ken

  I know this is a potential dupe of this question, but the last answer there was 18 months ago and a lot has happened since. There seems to be some uncertainty about XNA in Windows 8. Specifically, Windows 8 by default uses the Metro interface, which is not supported by XNA. Also the Windows 8 store will not stock non-metro apps, so it will not stock XNA apps. Should we stick with XNA or does Microsoft want us to move to a different framework for managed game development in Windows 8? Edit: As pointed out in one of the comments, Windows 8 will be able to run XNA games in a backward compatibility mode. But that smells of deprecation.

  Read the article

• Error downloading novacom drivers &ndash; WebOS

  - by Ken

  I got sick of the Bing Maps on WebOS not being able to find “coffee” when I’m in St. Paul.  Coffe Pk, TX anyone? – no thanks.  So I finally got around to installing PreWare on my Palm Pre 2.  The WebOS Quick Install doesn’t successfully download the novacom drivers.  You can find them here: http://downloads.help.palm.com/opensource/novacom/novacom-win-32.tgz http://downloads.help.palm.com/opensource/novacom/novacom-win-64-tgz Don’t bother trying the Novacom Universal Installer either. Then put phone in developer mode (by Typing webos20090606 and switch on developer mode), attach phone in “Just Charge” mode, run WebOS Quick Install, select the globe icon, and search for PreWare, install.

  Read the article

• How do I get the name of a package, modify and install it?

  - by Ken

  I'm not very familiar with Ubuntu or Linux, but I'm a programmer, and some people told me that you can just go ahead and modify your system. So my question is, how do you go on about that? For instance, If I'm interested in modifying the behavior of the button or the desktop icons, or whatever it is: How do I get the source code? I guess I need the package name and download it. But how can I get the package name? Let's say I want the button package, where do I look to get the package name? is there a list on a website or a help file? Once I modify it, how can I replace the original with the new one? P.S. I had some troubles finding the right tags, feel free to edit them

  Read the article

• Diagnosing SAN connectivity issues (RHEL5)

  - by Matthew

  We are currently utilizing GFS2 to share a SAN LUN between 3 servers. However due to a feature problem with vendor software we are using, we currently have the volume unmounted on two of the boxes, and are instead exporting the GFS2 filesystem via NFS from the first one (the software requires some weird locking mechanics that GFS2 doesn't support). As of this morning, NFS was no longer able to read/write to the volume from any of the servers, including the NFS server. I then tried checking the normal mount (the directory that is exported on the NFS server) and I received a weird input/output error just trying to CD into it. When I tried running multipath, I got a DM error, however multipath -l worked just fine. I tried unmounting the GFS2 volume, and the CLI hung. I ran init 0 which killed most services, but then the shutdown appeared to have been hung. I logged in via out of band access (hp ILO) and saw that the shutdown was hung trying to unmount GFS2 volumes. My main priority was getting the box back online so after about 5 minutes of waiting I did a hard reset. I am now trying to figure out what went wrong. What are the correct logs to investigate? I've never run into SAN issues like this before. The SAN is connected via 2 fibre connections. Any help would really be appreciated. Everything appears to be up and functional now.

  Read the article

• Using FindAll on a List<List<T>> type

  - by Ken Foster

  Assuming public class MyClass { public int ID {get; set; } public string Name {get; set; } } and List<MyClass> classList = //populate with MyClass instances of various IDs I can do List<MyClass> result = classList.FindAll(class => class.ID == 123); and that will give me a list of just classes with ID = 123. Works great, looks elegant. Now, if I had List<List<MyClass>> listOfClassLists = //populate with Lists of MyClass instances How do I get a filtered list where the lists themselves are filtered. I tried List<List<MyClass>> result = listOfClassLists.FindAll (list => list.FindAll(class => class.ID == 123).Count > 0); it looks elegant, but doesn't work. It only includes Lists of classes where at least one class has an ID of 123, but it includes ALL MyClass instances in that list, not just the ones that match. I ended up having to do List<List<MyClass>> result = Results(listOfClassLists, 123); private List<List<MyClass>> Results(List<List<MyClass>> myListOfLists, int id) { List<List<MyClass>> results = new List<List<MyClass>>(); foreach (List<MyClass> myClassList in myListOfLists) { List<MyClass> subList = myClassList.FindAll(myClass => myClass.ID == id); if (subList.Count > 0) results.Add(subList); } return results; } which gets the job done, but isn't that elegant. Just looking for better ways to do a FindAll on a List of Lists. Ken

  Read the article

• Randomly displayed flashing lines, no response to all shortcuts, just power off. [syslog included]

  - by B. Roland

  Hello! I have an old machine, and I want to use for that to learn employees how to use Ubuntu, and to be easyer to switch from Windows. I've been installed 10.04, and updated, but this strange stuff is happend. Graphical installion failed, same strange thing. With alternate workd. Sometimes, when I boot up, a boot message displayed: Keyboard failure..., often diplayed after reboot, and after shutdown, when I haven't plugged off from AC. I replaced the keyboard yet, same failure... If I powered off, and plugged off from AC, no keyboard problems displayed in boot time. Details Configuration: Dell OptiPlex GX60 - in original cover, no changes. 256 MB DDR 166 MHz Intel® Celeron® Processor 2.40 GHz Dell 0C3207 Base Board I know, that is not enough, but I have three other Nec compuers, with nearly similar config, and they works well with 9.10, 10.04, 10.10. Live CDs I've been tried with 10.04 and 10.10, but the problem is displayed too. With 9.10 no strange things displayed, but it froze, during a simple apt-get install. Syslog An error loop is logged here, but I paste the whole startup and error lines. The flashing lines are displayed sometimes immediately after login, but sometimes after 10 minutes, but once occured, that nothing happend. Strange thing is displayed immediately after login: here. An other boot, after some minutes, strange lines, and loop in log appeard: here. The loop should be that: Jan 23 00:20:08 machine_name kernel: [ 46.782212] [drm:i915_gem_entervt_ioctl] *ERROR* Reenabling wedged hardware, good luck Jan 23 00:20:08 machine_name kernel: [ 47.100033] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung Jan 23 00:20:08 machine_name kernel: [ 47.100045] render error detected, EIR: 0x00000000 Jan 23 00:20:08 machine_name kernel: [ 47.101487] [drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 16 at 9) Jan 23 00:20:11 machine_name kernel: [ 49.152020] [drm:i915_gem_idle] *ERROR* hardware wedged Jan 23 00:20:11 machine_name gdm-simple-slave[1245]: WARNING: Unable to load file '/etc/gdm/custom.conf': No such file or directory Jan 23 00:20:11 machine_name acpid: client 1239[0:0] has disconnected Jan 23 00:20:11 machine_name acpid: client connected from 1247[0:0] Jan 23 00:20:11 machine_name acpid: 1 client rule loaded UPDATE Added syslog things: before errors, error loop, the complete shutdown(after the big updates): Jan 28 20:40:30 machine_name rtkit-daemon[1339]: Sucessfully called chroot. Jan 28 20:40:30 machine_name rtkit-daemon[1339]: Sucessfully dropped privileges. Jan 28 20:40:30 machine_name rtkit-daemon[1339]: Sucessfully limited resources. Jan 28 20:40:30 machine_name rtkit-daemon[1339]: Running. Jan 28 20:40:30 machine_name rtkit-daemon[1339]: Watchdog thread running. Jan 28 20:40:30 machine_name rtkit-daemon[1339]: Canary thread running. Jan 28 20:40:30 machine_name rtkit-daemon[1339]: Sucessfully made thread 1337 of process 1337 (n/a) owned by '1001' high priority at nice level -11. Jan 28 20:40:30 machine_name rtkit-daemon[1339]: Supervising 1 threads of 1 processes of 1 users. Jan 28 20:40:32 machine_name rtkit-daemon[1339]: Sucessfully made thread 1345 of process 1337 (n/a) owned by '1001' RT at priority 5. Jan 28 20:40:32 machine_name rtkit-daemon[1339]: Supervising 2 threads of 1 processes of 1 users. Jan 28 20:40:32 machine_name rtkit-daemon[1339]: Sucessfully made thread 1349 of process 1337 (n/a) owned by '1001' RT at priority 5. Jan 28 20:40:32 machine_name rtkit-daemon[1339]: Supervising 3 threads of 1 processes of 1 users. Jan 28 20:40:37 machine_name pulseaudio[1337]: ratelimit.c: 2 events suppressed Jan 28 20:41:33 machine_name AptDaemon: INFO: Initializing daemon Jan 28 20:41:44 machine_name kernel: [ 167.691563] lo: Disabled Privacy Extensions Jan 28 20:47:33 machine_name AptDaemon: INFO: Quiting due to inactivity Jan 28 20:47:33 machine_name AptDaemon: INFO: Shutdown was requested Jan 28 20:59:50 machine_name kernel: [ 1253.840513] lo: Disabled Privacy Extensions Jan 28 21:17:02 machine_name CRON[1874]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) Jan 28 21:17:38 machine_name kernel: [ 2321.553239] lo: Disabled Privacy Extensions Jan 28 22:07:44 machine_name kernel: [ 5327.840254] lo: Disabled Privacy Extensions Jan 28 22:17:02 machine_name CRON[2665]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) Jan 28 22:32:38 machine_name sudo: pam_sm_authenticate: Called Jan 28 22:32:38 machine_name sudo: pam_sm_authenticate: username = [some_user] Jan 28 22:32:38 machine_name sudo: pam_sm_authenticate: /home/some_user is already mounted Jan 28 22:57:03 machine_name kernel: [ 8286.641472] lo: Disabled Privacy Extensions Jan 28 22:57:24 machine_name sudo: pam_sm_authenticate: Called Jan 28 22:57:24 machine_name sudo: pam_sm_authenticate: username = [some_user] Jan 28 22:57:24 machine_name sudo: pam_sm_authenticate: /home/some_user is already mounted Jan 28 23:07:42 machine_name kernel: [ 8925.272030] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung Jan 28 23:07:42 machine_name kernel: [ 8925.272048] render error detected, EIR: 0x00000000 Jan 28 23:07:42 machine_name kernel: [ 8925.272093] [drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 171453 at 171452) Jan 28 23:07:45 machine_name kernel: [ 8928.868041] [drm:i915_gem_idle] *ERROR* hardware wedged Jan 28 23:08:10 machine_name acpid: client 925[0:0] has disconnected Jan 28 23:08:10 machine_name acpid: client connected from 8127[0:0] Jan 28 23:08:10 machine_name acpid: 1 client rule loaded Jan 28 23:08:11 machine_name kernel: [ 8955.046248] [drm:i915_gem_entervt_ioctl] *ERROR* Reenabling wedged hardware, good luck Jan 28 23:08:12 machine_name kernel: [ 8955.364016] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung Jan 28 23:08:12 machine_name kernel: [ 8955.364027] render error detected, EIR: 0x00000000 Jan 28 23:08:12 machine_name kernel: [ 8955.364407] [drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 171457 at 171452) Jan 28 23:08:14 machine_name kernel: [ 8957.472025] [drm:i915_gem_idle] *ERROR* hardware wedged Jan 28 23:08:14 machine_name acpid: client 8127[0:0] has disconnected Jan 28 23:08:14 machine_name acpid: client connected from 8141[0:0] Jan 28 23:08:14 machine_name acpid: 1 client rule loaded Jan 28 23:08:15 machine_name kernel: [ 8958.671722] [drm:i915_gem_entervt_ioctl] *ERROR* Reenabling wedged hardware, good luck Jan 28 23:08:15 machine_name kernel: [ 8958.988015] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung Jan 28 23:08:15 machine_name kernel: [ 8958.988026] render error detected, EIR: 0x00000000 Jan 28 23:08:15 machine_name kernel: [ 8958.989400] [drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 171459 at 171452) Jan 28 23:08:16 machine_name init: tty4 main process (848) killed by TERM signal Jan 28 23:08:16 machine_name init: tty5 main process (856) killed by TERM signal Jan 28 23:08:16 machine_name NetworkManager: nm_signal_handler(): Caught signal 15, shutting down normally. Jan 28 23:08:16 machine_name init: tty2 main process (874) killed by TERM signal Jan 28 23:08:16 machine_name init: tty3 main process (875) killed by TERM signal Jan 28 23:08:16 machine_name init: tty6 main process (877) killed by TERM signal Jan 28 23:08:16 machine_name init: cron main process (890) killed by TERM signal Jan 28 23:08:16 machine_name init: tty1 main process (1146) killed by TERM signal Jan 28 23:08:16 machine_name avahi-daemon[644]: Got SIGTERM, quitting. Jan 28 23:08:16 machine_name avahi-daemon[644]: Leaving mDNS multicast group on interface eth0.IPv4 with address 10.238.11.134. Jan 28 23:08:16 machine_name acpid: exiting Jan 28 23:08:16 machine_name init: avahi-daemon main process (644) terminated with status 255 Jan 28 23:08:17 machine_name kernel: Kernel logging (proc) stopped. Jan 28 23:09:00 machine_name kernel: imklog 4.2.0, log source = /proc/kmsg started. Jan 28 23:09:00 machine_name rsyslogd: [origin software="rsyslogd" swVersion="4.2.0" x-pid="516" x-info="http://www.rsyslog.com"] (re)start Jan 28 23:09:00 machine_name rsyslogd: rsyslogd's groupid changed to 103 Jan 28 23:09:00 machine_name rsyslogd: rsyslogd's userid changed to 101 Jan 28 23:09:00 machine_name rsyslogd-2039: Could no open output file '/dev/xconsole' [try http://www.rsyslog.com/e/2039 ] When I hit the On/Off button, the system shuts down normally. May be it a hardware problem, but I don't know... Can you say something useful to solve my problem?

  Read the article

• How would i access the properties in this object? Twitter API

  - by Tapha

  I have stores this object in an variable called results. How would i access the profile_image_url for example. Here is the return value with print_r: stdClass Object ( [results] => Array ( [0] => stdClass Object ( [profile_image_url] => http://a3.twimg.com/profile_images/685278639/twitter-logo_normal.jpg [created_at] => Mon, 10 May 2010 11:29:44 +0000 [from_user] => BarclaysWealth [metadata] => stdClass Object ( [result_type] => recent ) [to_user_id] => [text] => RT @BarclaysStock: Investment ViewPoint - We take a look at what a hung parliament could mean for the UK economy http://bit.ly/OaYh7 [id] => 13721505359 [from_user_id] => 14895786 [geo] => [iso_language_code] => en [source] => <a href="http://twitter.com/">web</a> ) [1] => stdClass Object ( [profile_image_url] => http://a1.twimg.com/profile_images/671523082/32fb0a8_normal.jpg [created_at] => Fri, 07 May 2010 21:02:10 +0000 [from_user] => InfoFocus [metadata] => stdClass Object ( [result_type] => recent ) [to_user_id] => [text] => RT @BarclaysWealth: RT @BarclaysStock: Investment ViewPoint - We take a look at what a hung parliament could mean for the UK economy http://bit.ly/OaYh7 [id] => 13569384857 [from_user_id] => 85742792 [geo] => [iso_language_code] => en [source] => <a href="http://www.hootsuite.com" rel="nofollow">HootSuite</a> ) [2] => stdClass Object ( [profile_image_url] => http://a3.twimg.com/profile_images/685278639/twitter-logo_normal.jpg [created_at] => Fri, 07 May 2010 20:59:20 +0000 [from_user] => BarclaysWealth [metadata] => stdClass Object ( [result_type] => recent ) [to_user_id] => [text] => RT @BarclaysStock: Investment ViewPoint - We take a look at what a hung parliament could mean for the UK economy http://bit.ly/OaYh7 [id] => 13569257933 [from_user_id] => 14895786 [geo] => [iso_language_code] => en [source] => <a href="http://www.hootsuite.com" rel="nofollow">HootSuite</a> ) [3] => stdClass Object ( [profile_image_url] => http://a1.twimg.com/profile_images/485934856/BD_Icon_Twitter_small_normal.gif [created_at] => Fri, 07 May 2010 16:35:56 +0000 [from_user] => BARXdirect [metadata] => stdClass Object ( [result_type] => recent ) [to_user_id] => [text] => RT @BarclaysStock: Investment ViewPoint - We take a look at what a hung parliament could mean for the UK economy http://bit.ly/OaYh7 [id] => 13557670463 [from_user_id] => 66715243 [geo] => [iso_language_code] => en [source] => <a href="http://twitter.com/">web</a> ) [4] => stdClass Object ( [profile_image_url] => http://a1.twimg.com/profile_images/431590520/BSL_icon_normal.gif [created_at] => Fri, 07 May 2010 16:35:12 +0000 [from_user] => BarclaysStock [metadata] => stdClass Object ( [result_type] => recent ) [to_user_id] => [text] => Investment ViewPoint - We take a look at what a hung parliament could mean for the UK economy http://bit.ly/OaYh7 [id] => 13557633799 [from_user_id] => 36238006 [geo] => [iso_language_code] => en [source] => <a href="http://twitter.com/">web</a> ) ) [max_id] => 13722716932 [since_id] => 0 [refresh_url] => ?since_id=13722716932&q=http%3A%2F%2Fbit.ly%2FOaYh7 [results_per_page] => 15 [page] => 1 [completed_in] => 0.026887 [query] => http%3A%2F%2Fbit.ly%2FOaYh7 )

  Read the article

• Printer features don't work when printing to Canon Printers ir5185 and ir7095 in Snow Leopard

  - by Ken

  Recently updated to iMac running Snow Leopard. Connected Canon printers ir7095 and ir5185 via ethernet and downloaded latest drivers from Canon website. Can print to both from InDesign CS3, however, when I select printer features such as heavy paper and printing to stack bypass, it prints but just defaults to plain paper in drawer 1. Also, when printing to ir7095, 0001 prints five times on sheet in background. Is there any way to get the printer features that are available to work?

  Read the article

• Firefox Furigana Injector on Debian

  - by Ken

  I'm using Iceweasel (un/rebranded Firefox) 3.5.9 on Debian (amd64). I want to use the "Furigana Injector" plugin. I installed it via the Tools - Add-ons menuitem (version 1.3), and restarted Firefox. Unfortunately, when I click the button, it only says: "The 'SimpleMecab' XPCOM component could not be loaded." in a dialog box, several dozen times (!). I found a Debian package "libmecab1", but installing it didn't help. Is there some "mecab" package I can install that will make this work?

  Read the article

• Vista install works on one computer, but bluescreens another (on which Vista is known to work)

  - by Ken

  I hope my explanations make some sense -- please ask for clarification if they don't. I had a computer running Windows Vista (Ultimate, 64-bit). All was well! Then one day there was a nasty power surge at the office, and it died. (We didn't have surge protectors at the office, unfortunately. I assumed our lines were conditioned elsewhere, or was not an issue here. Oops.) After some testing, it was determined that the PSU, motherboard, and RAM were bad. While waiting for new hardware to arrive, I put my hard disk in a spare PC which had identical parts (mobo/CPU/RAM/PSU/video). Everything worked perfectly. The only way I could even tell it wasn't my computer is because Vista asked to re-activate itself with the new hardware, which worked fine, too. So the hard disk seems OK. Then the new parts arrived. The old motherboard model is no longer manufactured, so it's a new one with the same CPU/RAM/videocard/etc. slots. The PSU is also new, while the RAM I'm using is from the spare PC mentioned above. When I put it together and tried booting with my old hard disk, it starts to boot Windows, and then (fairly early in the process) gives a bluescreen and immediately reboots (so I can't see whatever the bluescreen is trying to tell me). I tried "safe mode", which also bluescreened. I tried booting the Vista DVD and running the repair utility, which found a Vista install, confirmed that it would not boot, and, eventually, declared that it was unable to repair it. I installed Vista fresh on a new hard disk, with the new mobo/etc., and it works perfectly. (That's what I'm running now.) I've also booted a Linux CD here, which ran great, and I've run Memtest86+ for a while, which found no errors. So all the hardware apart from the old hard disk seems OK, too. I don't think the problem is with my old Vista hard disk, since I used that with another mobo/CPU just fine. I don't think it's any other part of the new hardware, since I'm able to use it (and test it) with no trouble. It's just the combination of my old Vista install plus the new PC hardware that's not happy. I can get my data off my old hard disk and onto my new hard disk, and reinstall my apps, but it would be nice if I could fix things so I could continue to use my old hard disk as before. The latest hypothesis I've heard is that Vista had trouble with the new hardware (i.e., motherboard), but we have no idea what to do about that (except Safe Mode, which didn't work). Suggestions? Hypotheses for what's not right about this combination of Vista install and motherboard? Thanks!

  Read the article

• Get rid of Vista security warning

  - by Ken

  I found this question. The question exactly matches my problem, but the solution doesn't work. In the Properties window, I see "Security: This file came from another computer and might be blocked to help protect this computer. ((Unblock))". When I click Unblock and Apply, the Security section disappears. But when I go to run it again, I still get the security warning. If I right-click and choose Properties on the exact same thing, the Security section is back, offering me the chance to Unblock it again. So unblock seems exactly as useless as the "Always ask" checkbox. Anyone seen this before? How do you really Unblock an app that Vista doesn't want to let you Unblock?

  Read the article

• Can I run iOS apps on my Mac?

  - by Ken

  I've seen a number of neat iPhone apps recently that I'd like to use. In particular, there are a number of neat musical apps (metronome, tuner, etc.) that seem highly rated, and have no real Mac equivalent. I don't have a recent iPod/iPhone/iPad (I don't need portability or a phone and it seems silly to pay hundreds of dollars to run $15 worth of apps), but I do have an Intel (C2D) Mac. Can the iPhone dev simulator, or any other emulator, download and run iPhone App Store apps?

  Read the article

< Previous Page | 2 3 4 5 6 7 8 9 10 11 12 13  | Next Page >